Chris K 270004Y3TR Visits (10857)
Configuring secured SAML with WebSphere requires web pages to be protected. The design of the TRIRIGA application does not currently allow you to set up the EAR or WAR (depending on TRIRIGA platform release) to include web page protection. The ability to protect the web pages in this manner would require a major change in the TRIRIGA platform, so this would not be viewed as a defect but as an enhancement.
So, what can I do to get this level of security? Your best option is to check the Request For Enhancement (RFE) site to see if someone has already requested that this be required in a future release. If an RFE exists, vote for it. The more votes an RFE has, the more likely it is to be included in a future release. If an RFE does NOT exist, create one and be sure to go to the Service Management Connect (SMC) forum and solicit votes for your enhancement request. Below is information about the RFE process that I provide to customers when a PMR leads to this sort of issue.
You might consider submitting an enhancement request via the Tivo
On the RFE page, there are 2 pick lists under the title Filter the page content by brand and product that will help you start the search process for existing RFEs regarding the TRIRIGA application. Set the left hand pick list to Internet of Things and set the right hand pick list to IBM TRIRIGA Platform. Next to this right hand pick list is an arrow pointing right. Click on it and the list will automatically filter based on the selections in the pick lists. Underneath these pick lists is a search text field. You can enter text there to further refine your search. For this issue, I typed SAML in that field and clicked the Enter key. There are 2 RFE entries listed as a result. If, after reviewing the entries, you determine they do not fit your requirements, create a new RFE. If the existing entries DO fit your requirements, vote for them.
Inside each RFE record is an ID field. This field is immediately below the title of the RFE. In order to solicit votes for your RFE, navigate to the SMC forum for IBM TRIRIGA Platform and create a new forum entry with the title of your RFE. In that forum post, be sure to include the merits of your RFE and provide the ID. This will make it easier for people who want to vote for your RFE to find it via the RFE home page. Remember, the more votes for a particular RFE, the more likely it is to be considered for a future release of the IBM TRIRIGA Platform.
dmmckinn 1200006SCS Visits (10309)
Looking for information to help with the planning and installation of your IoT Continuous Engineering solution?
The IBM Internet of Things (IoT) Continuous Engineering Solution is an integrated solution for systems lifecycle management. The combination of products, components, and practices is built on an open integration platform so you can share plans and requirements, model artifacts, and manage testing while applying best practices and built-in process guidance.
Below we have pulled together a collection of reference material from the Deployment wiki on Jazz.net:
AcdntlPoet 2700019V2G Visits (8937)
Faster calibration with Maximo Anywhere - Calibration on Work Execution enables you to complete your calibration work orders in the field, in disconnected and connected environments. With it's simplified UI, you can quickly capture the calibration data that you need and receive immediate tolerance validation.
Shradha_S 270007543G Visits (4825)
If you are using RTC's Pessimistic locking feature, it doesn't work for third party editors like Microsoft Office.
For the above issue, a defect has been identified with third party editors. Below are links to the related defects:
--> Open any Microsoft Office extension (.docx) file using "Open with" option in external editor, the file remains in read-only mode and saving change in the files gives an option to do a "Save As", rather than updating the original file.
To summarize, the read-only doesn't work if the file is edited with Eclipse embedded editor, but the same works if the files is opened using an External editor.
You can also refer the below link for more details:
AcdntlPoet 2700019V2G Visits (8059)
Maximo supported versions and fix information March 2016 - Get to know Eleri Gregory and Navin Desai as they discuss info
GiuCS 270003E2P0 Visits (8223)
This is for those of you who have more than 1 application server setup!
After spinning off the TRIRIGA application server into 2 separate application servers you are checking all to see if the second application server is set as the original one, the Licenses in the second application server show 'No' in the Licensed column in Administration > System > License, but the licenses have not expired.
First thing you try is to use a user id to log into this application server. There is no problem in the front-end application, any users can log into both application servers.
This was observed before as a cache issue. Sometimes during installation of a second application server the licenses at first have a problem fetching the correct status from the database and this information gets stuck into there.
What you need to do is to go to the Administration Console and Clear the Global Cache. Log back into the application and check the Licenses again. In most cases this is resolved as it is just a misalignment from the actual database information and what is cached.
If not, contact IBM support.
More information about cache clearing: How
Romain_Barth 2700076HKB Visits (8668)
Moving a linkset from a link module to another link module in DOORS 9.
The DOORS 9 client does not provide such a feature. However, it is possible to perform this task by running a DXL script.
AcdntlPoet 2700019V2G Visits (8774)
Getting Started for Gateways in IBM Watson IoT Platform - With the introduction of the concept of gateways to IBM Watson IoT Platform, applications can receive data and control devices which are connecting through a gateway. Gateways are specialization of devices, because they share almost all of their characteristics and behavior with regular devices (events, commands, device management). Gateways have the additional permission to register new devices and act on behalf of a device that is assigned to the gateway. To support gateways a new property was introduced in device type. This new video demonstrates how to get started with Gateways in IBM Watson IoT Platform. Find out more at
GiuCS 270003E2P0 Visits (10363)
You are glad that after connecting your Eclipse BIRT environment to your TRIRIGA Database, and using a SQL Query you build your own very first report.
You preview it in BIRT and the report runs just fine, pulling data from the database and displaying within the format you set. It is a good looking report you think and my users will love it!
Now it is time to see it running in TRIRIGA, so you read the instructions that say you need to import it to Document Manager as a ZIP file to be used in a System Report running an External Query, and you think: Easy!
You get back to Eclipse and export the report. There are a lot of options to export it and you go for the "Archive File" one, that gives you the option to select as a zip what is the exact file you need to upload to TRIRIGA Document Manager, how convenient.
You import it to TRIRIGA, create a System Report, point to the zip file you imported to Document Manager and the report does not run, throwing an error in the front-end. Depending on the browser it could be an HTTP 500 error or a MID-xxxxxxxxx error.
What could be wrong?
Well, although BIRT Eclipse gives you the convenient option to export the report as a zip file, that zip file will preserve the folder structure from your Workspace panel (usually on bottom left of Eclipse Report Designer view).
TRIRIGA needs that the .rptdesign file inside the zip is located on the zip file root. If not, the report will not run. See the Bad and Good examples below:
In case you set the BIRT Flags in the Admin Console - Platform Logging and reproduce the issue you will see an error in server.log like this:
2016-04-18 13:11:04,682 ERROR [com
A very amicable message in the logs!
GiuCS 270003E2P0 Visits (6106)
Well, you get TRIRIGA 3.4.2 or later to install and see how cool to use the Liberty Profile for WebSphere Application Server (WAS). This lets you install both the web server and TRIRIGA at one strike and self deploys itself from TRIRIGA installer. What an easy deal!
After installing TRIRIGA and the WAS Liberty profile, the user logged into the service and running it cannot log out or the service will be stopped. Many businesses do not allow an Admin user to be logged in indefinitely.
Now you're thinking you have to install all over again in a WAS deployed first. You double check and see WAS Liberty cannot run as a service as a product limitation. What a drag...
Well, there is one workaround you can try. Using the Apache's daemon you can create a Windows service. The following instructions are an idea for how you can implement it, but it depends on your architecture and installation:
Note: If you run into any issues, check the logs in the LogPath directory location for any errors - the errors as listed in the event viewer logs from Windows do not give meaningful errors.
There is an RFE to implement this and I encourage you to vote for it: