If you work in a development shop similar to mine, you and many of your coworkers have more than one workstation under your desk.We use those extra machines for a variety of reasons but by and large they they tend to serve most often as foot warmers. That is not to say that they are unnecessary but rather they simply aren't used most of the time. If you try to eliminate one, you will surely need it within the next week but if your manager asks if it is really necessary you would be hard pressed to pinpoint precisely when the last time it was used for something really important. To developers, these extra machines are potential sandboxes for isolated experiments or testing scenarios. For managers, they are relatively unused capital investments that require inventory control and have depreciating value. If you are a network administrator there are certainly computers in your inventory that are older and lack the capacity to be counted on for everyday use. They sit in a corner or in a blade rack and are probably idle or even powered off. These assets take up physical space and contribute very little to your data center. However, they have little sale value but may represent a significant investment. Or maybe you just can't part with them for sentimental reasons.
Whatever the reasons for having computing resources lying around that are seldom used, here is an idea: Virtualization. With virtualized images you can use those machines for whatever purposes are required and for as long as they are required without having to spend hours loading them with a compliant OS image, installing software and configuring them for use. Virtual image libraries could hold preinstalled systems for almost any need. It could be for anything:
Workstations provisioned for temporary workers
More server capacity
More machines or load testing
Extra processors for parallel processing systems
Back up systems to carry loads during maintenance hours
If you use WebSphere in any capacity, CloudBurst can be used to lay in place a completely functioning WebSphere install in as little as 20 minutes, OS and all.
When the need for the machine is passed, it can be un-deployed and returned to the pool. This could significantly increase the available computing power of an entire development business. The ability to turn any machine into a needed and useful system on demand is real agile computing and gives a whole new dimension to governance.
We've been talking a lot recently about Virtual Application Patterns and enhancements to this deployment model in IBM Workload Deployer v3.1. This is appropriate because virtual applications are a substantial evolution for application deployment in a private cloud. Virtual Application Patterns deliver on the promise of Platform-as-a-Service - letting you focus on the application while Workload Deployer builds the necessary platform to deploy and manage your application.
However, Virtual System Patterns are still alive and well ... and quite frankly, this is where many people begin to explore the functionality provided in Workload Deployer. For many, it is a logical first step to start recreating familiar physical environments in the private cloud and then leverage these environments to develop and test their applications. It is also a great way to build out new applications using familiar concepts, leveraging existing scripts, and take full advantage of the agility, consistency, and increased resource utilization available in a Workload Deployer managed private cloud.
You may recall that virtual system patterns are sometimes called topology patterns because they are used to define a topology middleware configuration to meet application requirements. With a virtual system pattern you define exactly the type of middleware configuration that you need for your application environment and Workload Deployer provisions exactly that configuration when the pattern is deployed to your private cloud.
To use an automotive analogy, you might compare virtual systems to building your own hot-rod from a molded frame while virtual applications are more like purchasing a complete vehicle from a dealer. When you purchase a vehicle from a dealer you receive a fully functional automobile. Sure, you can choose the color and some options – but you don't necessarily know the details of all of the components that make your vehicle functional. Just add a driver (you) and off you go! This saves you substantial time and money while freeing you from the need to be an automotive engineer. As with the production vehicle, virtual applications are optimized for a specific purpose and are extremely effective when used for that purpose. All you need to do is add your application (the driver) and run-time requirements. Virtual system patterns are like the hot-rod approach. You start with a modeled frame of sorts (hypervisor edition images) – thereby saving time and effort so you don't have a start from scratch. However you still have the responsibility and flexibility to create a very unique custom vehicle. Doing so requires more expertise and a greater time investment when compared to a production vehicle (virtual application), but you get to decide all of the details. With virtual systems you specify the exact vehicle you need for your application. This provides substantial flexibility but requires a deep knowledge of the middleware and an investment of time building necessary scripts and other elements to support your application environment.
So as I mentioned, virtual system patterns are very popular. And if you have been following recent posts about the enhancements delivered in IBM Workload Deployer v3.1 you noticed that several of the features primarily focused on virtual applications have at the same time been extended to virtual system patterns - such as the shared caching service and the new base AIX image. So we certainly consider virtual systems deployment model to be important. IBM Workload Deployer v3.1 delivered new hypervisor edition images and the IBM Image Construction and Composition Tool was bundled with Workload Deployer - primarily used for creating custom images to leverage in virtual system patterns. The IBM Image Construction tool is a substantial advancement in the ability to create your own custom base images.
To help communicate that we haven't been neglecting virtual system deployment patterns, I created a new demo to highlight this deployment model. The demo begins by providing a quick overview of the components that go into a virtual system pattern. It then shows how to clone a pattern to customize it for your own purpose, deploy it, monitor licenses, and monitor resource usage in your private cloud. Finally, it shows a quick demonstration of installing an emergency fix to a deployed virtual system instance.
I'll be showing this and other demos at IBM Pulse 2012 next week. I hope to see you there!
One of my favorite things to do with users or potential users of WebSphere CloudBurst is to help them understand how they can construct a custom environment using the appliance. Typically, we take one of their existing application environments and discuss the configuration steps that contribute to its makeup. From there, we map the required configuration actions to different customization capabilities in the appliance. It is one thing to talk about how you can customize every layer of your application stack with WebSphere CloudBurst, it is quite another to talk about it in the context of an existing environment. This exercise usually serves to greatly enhance a user's understanding of how to construct tailored environments with the appliance.
While I cannot take every one of you through this exercise in the context of one of your own application environments, I can propose a scenario that will help to illustrate the WebSphere CloudBurst customization process. Consider that I want to deploy a clustered WebSphere Application Server environment whose application server instances utilize WebSphere DataPower XC10 for HTTP session management. In order to deploy such an environment, I would need to do the following:
Install an OS and WAS
Install the WebSphere eXtreme Scale Client binaries - required for integration
Construct a clustered cell
Augment profiles with WebSphere eXtreme Scale profile templates
Configure the application server instances to use WebSphere DataPower XC10 for session management
So those are the steps, but how do they map to WebSphere CloudBurst? First, I know that the WebSphere Application Server Hypervisor Edition image used by WebSphere CloudBurst encapsulates the installation of the OS and WAS. I also know that WebSphere CloudBurst will automatically construct the clustered cell during the deployment process. That means I need to address the installation of client binaries, augmentation of profiles, and configuration of application server instances. In order to do this, I will use a combination of image extension and custom script packages.
To get started, I extend an existing WebSphere Application Server Hypervisor Edition image and simply install the WebSphere eXtreme Scale Client binaries. I then capture that image and store it as my own unique image in the WebSphere CloudBurst catalog. Now, you may wonder why I did not capture the profile augmentation in the custom image. Remember, you cannot change profile configuration during the extend and capture process as WebSphere CloudBurst resets the profiles as part of capturing the custom image.
My custom image encapsulates the installation of the client binaries, so now I turn to custom script packages. I need two in this case. One script package will augment a profile (either deployment manager or custom node) with the WebSphere eXtreme Scale profile template. The second script package will configure application server instances to use WebSphere DataPower XC10 for HTTP session management. Once done with these script packages, I have all the assets I need to build my target environment.
Using my custom image, I build a pattern that contains the number and kind of WebSphere Application Server nodes that I want. I use the advanced options to define a WebSphere Application Server cluster ensuring its creation happens during deployment. Next, I drag and drop the profile augmentation script onto the deployment manager and custom node parts in my pattern. Finally, I drag and drop the WebSphere DataPower XC10 configuration script onto the deployment manager. The pattern is now ready to deploy!
For those of you that are visual learners like me, this demonstration provides a nice overview of exactly what I wrote about above. Check it out and let me know what you think.
When I first started to become aware of the cloud computing movement, I remember being intrigued but not all that aware of its possible consequences to me. After all, I was a developer not a systems administrator, so other than professional curiosity why was cloud computing all that important to me? Maybe you are a developer that can see right through my early, naive perception of cloud computing, but maybe you are a developer that, like me in the early going, doesn't quite see why cloud computing should matter to you. In the case of the latter, I've come to realize that there are several reasons why cloud computing matters to the developer. Let me try to sum up a few of those reasons for you here.
Reason #1: Developer services can be delivered via the cloudThere are many different types of services that can be realized from a cloud (public, private, or hybrid) that could have a large impact on the way developers work. As I mention in a previous post, IBM announced a Tools as a Service initiative in which IDEs are made available within a public cloud. IDEs in the cloud give developers a single development environment that can be accessed from any machine at any time. Better yet, we don't have to worry with installing and maintaining the environment. In addition to IDEs in the cloud, with the increased focus on virtualization and virtualization management that cloud is bringing, the ability to rapidly procure and instantiate runtime environments should become standard practice. This means that new ideas and new product code can be rapidly prototyped and tested. No longer should a proof of concept be delayed because it couldn't be proven in a runtime environment.
Reason #2: Cloud computing means a world of new products and offeringsAs a developer, it is a continuous battle to keep up with constantly emerging technologies, but it is imperative that we do so in order to ensure we take full advantage of available solutions. Cloud computing providers introduce a whole new world of service offerings for consumption by application developers. Cloud providers are offering new storage solutions, new database implementations, new content distribution mechanisms, new application integration capabilities, etc. As developers who may potentially be writing applications that run in the cloud, these new offerings directly affect the code we write. We need to educate ourselves about these new services, and we should understand when these solutions can be best leveraged to deliver our end product.
Reason #3: SOA becomes more importantOkay, so maybe this is not aimed squarely at the developer, but I know many times a developer wears the hat of architect as well... even if they don't know it! In a cloud computing world, the applications and services we deploy to the cloud should align and fit into our SOA. This is critical if we are to fully exploit the benefits of ubiquity offered by the cloud. Cloud computing inherently provides the ability to access services from any machine with a network connection, automatically giving the kind of service ubiquity sought by many companies. By developing these services in a SOA-compliant manner, we extend the reach by making it more readily consumable by other application components. We move beyond pure end-user applications and services, and in doing so new or increased revenue streams may be realized for the service.
These are just a few of the ways I see cloud computing currently affecting the developer's role. There are a myriad of reasons that developers should be cognizant of cloud computing, and I expect the list of reasons to boom as cloud computing continues to advance. I'd also like to hear what you think about cloud computing and the developer, so post a comment below if you would like to join the discussion.
One of my favorite books from childhood is If You Give a Mouse a Cookie. Although targeted at children, the book illustrates a frequently occurring human behavior that is important for all of us understand. That behavior is the tendency for escalating expectations. The book offers this up by starting out with the simple action of giving a mouse a cookie. The mouse in turn asks for a glass of milk, various flavors of cookies, and on and on, until the mouse circles back to asking for another cookie.
Nearly all of us exhibit this same kind of behavior, and it can often produce positive results. In particular, in IT we always push for the next best thing or a slightly better outcome. Personally, I am no stranger to this behavior because I experience it from WebSphere CloudBurst users quite frequently. In these cases, it usually revolves around one particular outcome: speed of deployment.
Bar none, users of WebSphere CloudBurst are experiencing unprecedented deployment times for the environments they dispense through the appliance. The fact that we say you can deploy meaningful enterprise application environments in a matter of minutes is far beyond just marketing literature. Our users prove it everyday. However, just because they are deploying things faster than ever does not mean they are content to rest on those achievements. They want to push the envelope, and I love it.
For our users looking to achieve even speedier deployment times, I offer up one reminder and one tip. First, analyze all of your script packages to ensure you are using the right means of customization. If you have some scripts that run for considerably longer than most other script packages, you may want to at least consider applying that customization by creating a custom image. You still need to adhere to the customization principles outlined here, but you may benefit from applying the customization in an image once and avoiding the penalty for applying it during every deployment. You may also be able to break this customization out with a combination of a custom image and script packages. For instance, instead of having a script that installs and configures monitoring agents, you may install the agents in a custom image and configure them during deployment. Being selective about how and when you apply customizations can go a long way in improving your deployment times.
In addition to the reminder above, I also have a tip. Take a look at all of the script packages you use in pattern deployments and look to see if there are any that you can apply in an asynchronous manner. In other words, identify customizations that need to start, but not necessarily complete as part of the deployment process. Going back to our example of configuring monitoring agents during the deployment process, it may be important to kick off the configuration script during deployment, but is it crucial to wait on the results? Maybe not. If it is not, consider defining the executable argument in your script package in a manner that kicks off the execution and proceeds -- i.e. nohup executable command &. This approach can save deployment time in certain situations.
My advice to users of WebSphere CloudBurst: keep pushing your deployment process! Pare as many minutes off the process as you can. I hope that the tips above help in that regard, and be sure to pass along other techniques that you have found helpful.
In the course of my job, I am lucky to be able to work with both enterprise users and business partners who are adopting and using the WebSphere CloudBurst Appliance. When it comes to the business partner camp, one of my absolute favorites is the Haddon Hill Group. The Haddon Hill Group is an IBM Premier Business Partner, and they have been an early adopter and vocal advocate of the WebSphere CloudBurst Appliance. They have extensive knowledge of the use of the appliance in enterprise accounts, and quite frankly, they are doing some really cool things with WebSphere CloudBurst.
Given the above, I was glad to see summarized results from their various implementations made available recently on the IBM site. The summary is fairly concise, so I encourage you to take a look at the results Haddon Hill Group is getting with WebSphere CloudBurst.
I am not going to rehash the contents of the results here, but there are a couple of things I want to call out. First off, Haddon Hill Group says that WebSphere CloudBurst can provide companies with a '100 times faster time to market' delivery experience. In a practical sense, this means reducing the amount of time to deliver WebSphere environments from 40-60 days on average to just hours. That is an eye-opening data point!
The other thing I want call out here is a quote from Phil Schaadt, President and CTO, Haddon Hill Group. I have had the pleasure of working with Phil and team, and I have heard him echo these same sentiments many times:
"The important thing about the IBM WebSphere CloudBurst Appliance is that it will dispense a WebSphere Application Server image onto your WebSphere Application Server environment or private cloud along with other products within the WebSphere stack, and that application server will be ready in a few minutes. You can do it in a clustered environment, and you can even roll out IBM WebSphere Process Server and get it right in a fully clustered environment with a database connection, in about 90 minutes. You can also easily manage all the configurations of IBM WebSphere Process Server that you need. All the steps that took up so much time and effort on the part of IT staff have been removed. The savings for companies with large WebSphere implementations can be in the millions."
It is always great to see clients putting our technology to use to produce tangible business value. Again, I encourage you to take a look at these reports. As always, I am eager to hear what you think, so leave me a comment or reach out to me on Twitter @damrhein.
One of the most powerful features of WebSphere CloudBurst is the ability to take one of the WebSphere Application Server Hypervisor Edition virtual images that are shipped with the appliance and extend it to a produce a custom virtual image. This allows users to begin creating customized environments from the bottom up, starting with the operating system. To put it in better context, let's take a look at a couple of scenarios where this feature comes in quite handy.
First off, a very common need for our customers is the ability to continually monitor their application environments. For instance, you may install Tivoli monitoring agents on all of your machines hosting WebSphere Application Server processes and configure those agents to report back to a management server. This is a great case for image extension in WebSphere CloudBurst.
In this scenario, you would start by extending an existing WebSphere Application Server Hypervisor Edition image. WebSphere CloudBurst creates a running virtual machine based off of the selected image, and you log into that virtual machine and install the Tivoli monitoring agents. Once the installation is done, you capture the virtual image back into the WebSphere CloudBurst catalog and use the new image to build a custom pattern. The last step is to include a script package on this custom pattern that, upon deployment, will configure the installed monitoring agents to report back to your desired management server.
Another use case is likely to be of interest to you if you are using WebSphere Virtual Enterprise (or something similar), and you could benefit from the same ease of provisioning for those environments that WebSphere CloudBurst brings to WebSphere Application Server environments. You can use the same customization combination above (image extension and custom scripts) to enable WebSphere CloudBurst to essentially dispense WebSphere Virtual Enterprise cells.
Again, this scenario starts off by extending a WebSphere Application Server Hypervisor Edition virtual image. Once the virtual machine for the extension is created by WebSphere CloudBurst, you log in and install the WebSphere Virtual Enterprise product. After the installation is done, you capture the image and store it in the catalog. Next, you build a custom pattern based off of this image and include script packages that, upon deployment, augment the various parts in the pattern from WebSphere Application Server profiles to WebSphere Virtual Enterprise profiles. (You may wonder why you wouldn't just create the WebSphere Virtual Enterprise profiles during the image extension process. This is because during image extension, you cannot make changes to the virtual disk that contains the WebSphere Application Server profiles. Any changes made to the profiles will be wiped out during the capture process.)
There are countless more scenarios for creating custom virtual images in WebSphere CloudBurst. To name a few, you may want to install JDBC drivers that are common to almost all of your application environments, install required anti-virus software, or just make operating system configuration changes. All of these things can be accomplished through the image extension and capture process. Look for an article coming out soon that will discuss and explain, in much greater detail than I provided here, the process of installing and configuring Tivoli monitoring agents in environments dispensed by WebSphere CloudBurst. In the meantime, if you have any questions or comments, drop us a line here or check out our forum.
When it comes to managing users and user groups within WebSphere CloudBurst, you can choose to manage all aspects of those resources within the appliance. Mainly this means that you can define and store user information (including login passwords) within the appliance, and you can define and maintain user groups and their associated membership list on the appliance. While you can do this and be sure that your information is extremely secure, you may instead want to integrate with an existing LDAP server that has some of this user and user group data. WebSphere CloudBurst certainly allows you to integrate with LDAP servers, but what does that mean for you?
For starters, when you integrate WebSphere CloudBurst with an LDAP server and enable the LDAP authentication feature, you no longer specify password information when defining users of the appliance. When users login, the password they specify will be authenticated against information stored in the LDAP server. Naturally, if you add a new WebSphere CloudBurst user with LDAP authentication enabled, that user must be defined in the LDAP server. Otherwise, WebSphere CloudBurst will prevent you from adding the user because it has no way to authenticate that person.
From a user groups standpoint, integrating with LDAP means you can no longer modify user group membership. User membership in groups is determined by information in the LDAP server. As a result, the same rule concerning adding new users applies when adding new user groups: You cannot define new user groups that do not exist in the LDAP server.
If you want to take a look at what LDAP integration looks like with WebSphere CloudBurst, I put together a short video. Let me know what you think.
Applications - just like humans, animals, plants, and many other things - have a life cycle. They are conceived, given birth, grow, do foolish things in youth, hopefully improve over time, have problems that need to be fixed, don't always age well .... and eventually they will die and release their assets to the next generation. Sounds kind of familiar, doesn't it?
One of the many benefits of virtual application patterns in IBM Workload Deployer and related IBM offerings is support for the complete life cycle of the application. You can manage the complete life cycle of virtual applications from a single interface that is fully integrated and well thought out - not just a series of links from one product UI to a different product UI. This eliminates the complexity of having to work with different interfaces, paradigms, metaphors, controls, labels, names, authorization, and so on - that is often the norm in many customer environments today. I think the benefits of this integration are obvious - eliminating confusion, configuration, miscommunication, interpretation, and mapping errors. Providing a truly complete solution also facilitates a common knowledge base and encourages cooperation and collaboration among teams. You can share patterns, providing consistent governance for a solution, guarantee consistency in deployments, and build upon the expertise provided by others. Having an integrated solution for design, development, deployment, configuration changes, monitoring, and problem determination ensures that time is not wasted and valuable information is not lost.
Since bundles are such a core component of the IBM Image Construction and Composition Tool, I thought it would help to take a closer, more thorough look at them than I did in my post last week (if you have not already, I suggest reading the overview post before continuing). To help us in our closer examination, we will consider an example bundle I built using the IBM Image Construction and Composition Tool. The example bundle I built encapsulates the logic to install and configure WebSphere Application Server Community Edition. Let's take this step by step.
The first part of the bundle is the General section. This section allows you to provide a name and description for the bundle, the bundle ID and version, and the products represented by the bundle.
The next section of a bundle is the Requirements section. In this section, you can define the operating system and software requirements for your bundle. In the OS section, you specify the type, distribution, and version level of the OS your bundle requires. In the software section, you can indicate that your bundle requires other bundles defined in the IBM Image Construction and Composition Tool. You do this by providing the bundle ID for required bundles.
Next, we move on to the Install section of the bundle. Two major subsections make up this section. The first subsection is the Files to Copy section. Here, you provide files, via a file upload dialog or by providing a URI, and you specify a destination directory. When you add a bundle to an image and initiate the synchronization process, the IBM Image Construction and Composition Tool will automatically copy the files you list here to the specified destination directory on the virtual machine. In the sample WebSphere Application Server Community Edition bundle, I specify a single install.sh file to copy to the virtual machine.
The second major subsection of the Install section is the Command subsection. In this section, you will specify the installation command that the IBM Image Construction and Composition Tool should automatically invoke during the synchronization process. Additionally, you can define variables that you want to make available to your installation scripts. The tool makes these available as environment variables for the process within which your script runs. In the sample bundle, I tell the Image Construction and Composition Tool to invoke the install.sh script specified above, and I define parameters that specify the location of the binaries to install, the location to install the binaries on disk, and more.
The next section in a bundle is the Configuration section. The configuration section allows you to define configuration operations that provide actions that execute for each deployment of an image containing the bundle. You can define 0 to N configuration operations in a bundle, and each configuration operation definition contains three major subsections. The first is the Files to Copy subsection. This subsection is similar to the Files to Copy subsection in the Install section. You provide files or file URIs and you provide a destination directory to which the tool will copy the file. The WebSphere Application Server Community Edition bundle contains a single configuration operation called ConfigWASCE. In the Files to Copy section, I define a single file to copy into the image's activation engine directory.
The second major subsection in the configuration operation definition is the Command subsection. Like the Command subsection in the Install section of the bundle, you specify a command to execute and optionally associate variables with the command. There is a key difference between the command definition for configuration operations as opposed to installation operations. The Image Construction and Composition Tool invokes the command you specify for installation operations exactly ONCE at image creation (synchronization) time. On the other hand, commands you specify in the configuration operation definition execute EACH time someone deploys an image containing your bundle. In the sample bundle, my ConfigWASCE.sh script will automatically execute for each deployment. The tool will package the image in such a way that ensures the automatic passing of parameters defined in the Arguments list (including num_servers, WASCE_HOME, and more) to the ConfigWASCE.sh script.
The final major subsection of a configuration operation definition is the Dependencies section. This allows you to define other services on which your configuration operation is dependent. This can include other configuration operations in the same or other bundles, and it can include general operating system services. The WebSphere Application Server Community Edition sample bundle includes a few dependencies.
The Install and Configuration sections are really the meat of your bundle, but there is more. There is a Firewall section that allows you to define port ranges and associated protocols that the IBM Image Construction and Composition Tool should ensure are open when provisioning an image containing your bundle. Currently, the tool supports firewall configuration data when building images for the IBM Cloud. The Reset section of the bundle allows you to define tasks that should execute when capturing the image back into the Image Construction and Composition Tool (after synchronziation completes). This allows you to clean up the state of the image after the install completes. Reset configuration is not currently available in the alphaWorks version of the tool. Finally, there is a License section where you can define software licenses associated with your bundle. The tool automatically adds these licenes to the constructed image's metadata, thereby allowing deployment tools to prompt the user to accept all pertinent licenses. The WebSphere Application Server Community Edition sample bundle defines a product license.
Of course, once the bundle definition is complete, you can leverage it to compose and produce an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. In the case of the WebSphere Application Server Community Edition sample bundle, I used it to create an image that I loaded into WebSphere CloudBurst and used to build patterns.
I hope this helps to provide a better idea of what bundles are all about in the Image Construction and Composition Tool. Don't forget to take a look at the overview demo and stay tuned for more to come about this new tool!
Customization capabilities have been very important to the design of IBM Workload Deployer going back to the beginning with WebSphere CloudBurst. Having the ability to quickly spin up environments in a cloud really does little good if those environments are not customized according to your needs. If you look at the virtual system pattern capability, it is why we always had the notion of custom images, custom patterns, and custom scripts. We give you a strong foundation, and you tweak it here and there to create what you want.
Customization is not a concept unique to virtual system patterns. The virtual application model in IBM Workload Deployer supports many different mechanisms for you to tailor your cloud-based environments. You can start with the virtual application pattern types that we ship and use any components in those patterns to build a custom environment. The patterns you build can include your own configuration (within the set of configurable parameters) and include policies that you need for your environment. In looking at just the IBM Workload Deployer Pattern for Web Applications and the IBM Workload Deployer Pattern for Databases, there are quite a number of scenarios you can support with your cloud. However, what happens when you want to go a little further and color outside the lines of what we provide?
At some point you may have heard or read that the entire virtual application pattern model resides on a pluggable architecture. In effect, this means that everything about a virtual application pattern type, from the elements that show up when building a pattern to the management interface you interact with after deployment, is customizable. The fundamental unit of customization for a virtual application pattern type is a plugin. Plugins provide the know-how in terms of installing, configuring, integrating, and managing the application types supported by a given pattern. Plugins also provide metadata that control what users see as they build and manage these patterns. In short, plugins are the source of truth for virtual application patterns!
If you looked in IBM Workload Deployer, you would find the collection of plugins that support the virtual application pattern types shipped with the offering. While that is interesting, you should also know that you can supply your own plugins. That's right. You can develop a plugin, and load it directly into the appliance. This allows you to do two very important things. First, you can extend the virtual application pattern types that come with IBM Workload Deployer with any kind of functionality you deem important. This may be additional monitoring, integration with external systems, or any number of other extensions. Second, you can create new virtual application pattern types that support your desired workloads. You can support the workloads with the software of your choosing so long as you can supply the necessary know-how in your plugins. In either case, you contribute the plugin, and your customized components become first class members of the IBM Workload Deployer landscape.
Okay, so I admit that this is not necessarily news. We have supported user-contributed plugins since the release of IBM Workload Deployer. However, there is something new that significantly lowers the barrier to entry in the custom plugin game. Early last week, IBM announced the IBM Workload Plugin Development Kit. This kit provides a set of tools and samples designed to make the construction and packaging of custom plugins a simple process. In my opinion, this reiterates our commitment to an extensible, application-centric cloud approach, and it represents a huge step forward in the industry as a whole. Be sure to check this out, and don't be shy with the comments and feedback!
A couple of weeks ago, I wrote about a sample I was working on that would allow one to apply a layer of governance to their WebSphere CloudBurst patterns. Earlier this morning, I posted the sample to the WebSphere CloudBurst Samples Gallery under the 'Sample CLI Scripts for WebSphere CloudBurst' section. The name of the new sample is 'Check WebSphere CloudBurst patterns', and you can download it here.
As hinted in my earlier post, the new sample is a simple way to check your patterns against assertions you supply in a properties file. It allows you to check that patterns contain the correct parts and scripts, and it allows you to verify that they were built from valid images. The assertion format is pretty basic, but it should be flexible enough to allow you to check patterns against a wide array of requirements. The sample archive includes a readme file that explains exactly how to use the script, and it contains a sample assertions file to give you an idea of the input syntax.
I hope this helps to address some of the requirements of many WebSphere CloudBurst users that told me they were in need of a way to apply governance to their patterns. If you have any questions about the sample, please let me know. Alternatively, if you have another idea or a problem you would like to see addressed by a sample in our gallery, please let me know.
Cloud Computing is essentially a Systems Management innovation. I understand that, to some, that means simply managing hardware and capacity or computing power. However, it also involves deployment of enterprise level software. While some software is a kind of out-of-the-box asset that can be installed generically as if it were a hard asset, infrastructure software like WebSphere requires considerable skill and knowledge.
Tier1 cloud computing implementations must be able to expand the enterprise into provided capacity quickly and autonomically. If the scale-out requires tremendous effort and specialized skills then the cost savings that cloud offers is severely mitigated.
CloudBurst provides a mechanism to quickly deploy WebSphere environments to private clouds and allows the administrator to simply manage the assets on which WebSphere will run. The expertise of setting up and configuring WebSphere is, in effect, canned. This allows for much more rapid deployments and reduces the need for more expensive admins.
While many companies are still putting forward more technologically sophisticated offerings that still require even more technologically sophisticated staff, WebSphere has produced a product with a value which is more easily realized, understood and which can be seen on the balance sheet.