As Joe mentioned in his last post, virtual application patterns are all the rage in IBM Workload Deployer. The high degree of abstraction provided by these patterns means users can remove tedious, time consuming tasks like middleware installation, configuration, and integration from their field of view. As a consequence, users can build and deploy application environments in unprecedented time, thus freeing up more time to focus on the actual application.
This is obviously important because building and deploying application environments are crucial, traditionally time consuming activities. However, what happens after you build and deploy the application? You manage it, that's what! Joe brought up the fact that IBM Workload Deployer makes this easier too by delivering an integrated management portal through which you can manage and monitor your application environments. Now, this probably already sounds valuable, but what really puts it over the top is the management portal exposes an interface that is workload aware. But, what does that mean?
To get an idea of what that means, consider the case that you use the shipped virtual application pattern to build a simple application environment with a web application and database. You deploy it with IBM Workload Deployer, and your application is up and ready. Now you want to start checking things out. You start by opening the management portal directly from the appliance, and you see both the application and database components listed in the view:
After you looked at basic machine statistics such as network activity and memory usage, you could move on to a more workload-centric view. For instance, you could examine statistics particular to a web application such as request counts and service response times:
You may also decide that you want to alter certain aspects of your deployed environment. As an example, you could update your deployed application or change certain configuration data in the deployed environment:
It is important to note that you have a management interface for each of the components in your environment. That means that from the same management interface, you can manage and monitor the database you deployed as part of your environment. For example, at different intervals, you may want to backup your database. You can do this directly from the management portal provided by IBM Workload Deployer:
Lest you think that you can only manage and monitor, this unique management interface is also a one stop shop for all of your troubleshooting needs. From the centralized portal, you can view log and trace data for each component:
Virtual application patterns are an attempt to encapsulate each phase of your application's lifecycle, from creation to deployment to management. In this regard, I hope the above provides a taste of some of the management capabilities provided by virtual application patterns. It truly is the tip of the iceberg!
Clouds form known patterns of shape, consistency and color. These patterns have formal names too: cumulus, stratus, nimbus, etc. But there are also the patterns that are only in the eyes of the imaginative: a dragon, or a face, or Aunt Betty being chased by a fire-breathing turtle.
Cloud computing implementations are composed of common elements such as network servers, enterprise software, routers, etc. There will be common configurations, however, the power of the cloud comes from the idea that capacity, software, storage, etc. are delivered on demand as a service. So despite the fixed configuration that is really the connected inventory, the shapes of clouds are indeed malleable. So what shapes will we see in these clouds?
One of the most widely used examples of a cloud benefit is the greeting card company that has flat business through the year except for specific holiday peaks. The cloud allows that company to expand their capacity for those peaks only, saving them money. In this example, the cloud is hosted by a third party provider.
But what about that nebulous provider? Such a company will still have to manage capacity and other IT services for all its customers. It has the same issues that any IT shop would have. Finite resources that have to handle all the demand. The cloud principle allows it to provision resource as it is needed, but then this provider will only be able to handle so many customers that have peak business around the various holidays other wise there is no gain. In fact I think that these providers will have to plan which kinds of business they can host to maximize their 'face' time.
It's about the time of year when we all look back and try to determine exactly how we spent the past twelve months. Whether we do it because we have to as part of year-end job reviews or because we like to take stock in what we've done and figure out where to improve next year, it's a time for reflection and recall. For me, this exercise made me take a look at various things we have done to deliver WebSphere CloudBurst technical collateral (articles, demos, blogs, etc.) in 2009.
For all practical purposes, our mission and efforts for such technical collateral for WebSphere CloudBurst started when it was announced at Impact in May of this year. Though there was certainly some preparatory work being done on this front, there was nothing we could really push to the public until after the announcement, and in some cases even after the appliance's release in June. Given that most of the content was produced over a six month stretch, I really think we put forth a strong effort, and I hope that this technical material has helped to both raise awareness of and educate users on the WebSphere CloudBurst Appliance.
Seeing as I already went back and rounded up this content, I thought I'd provide you a centralized look at the information. To start, I accounted for the articles that we published to the IBM developerWorks site over the six month stretch. All together I counted 8 articles and a special column entry:
As you can see the articles cover quite a bit of content and range from general level overview articles to technical in-depth "how-to" style articles. In general they seem to have been received well with over 26,000 views to this point. Our goal is to keep the pace up for 2010, and we already have a few articles on our plate for early in the new year (including an overview of what's new in WebSphere CloudBurst 1.1).
Another main medium we utilized to spread the word about WebSphere CloudBurst was YouTube. On our YouTube channel at http://youtube.com/websphereclouds, we currently have 17 different videos that demonstrate how to use certain features of the WebSphere CloudBurst Appliance. Though I think each demo provides value depending on exactly what a viewer is looking for, 3 of them really stick out for me.
Check out our videos if you get a chance. We've made an effort to keep them as short as possible while still providing value to viewers.
We have some WebSphere CloudBurst content spread around other places as well including this blog and my personal blog. Over the next few weeks we'll be taking a look at what worked and didn't work with respect to getting information out to the public. Of course at any time we very much appreciate your feedback on how you like to see content delivered because you are our target audience! If you have a comment, idea, or suggestion, leave a comment on the blog or send me a tweet to @WebSphereClouds.
The concepts that govern users and user groups in WebSphere CloudBurst are fairly basic, but I get asked about them enough that I believe they warrant a short discussion. First things first, you can define users in WebSphere CloudBurst and optionally define user groups to assemble users into logical collections. For both users and user groups, you can assign roles that define the actions a particular user or group of users can take using the appliance.
All of that is straight forward, but it can get a bit tricky once we start considering the effects of user permissions when managing at the user group level. The basic premise is that when a user belongs to a group or groups, the user's effective permissions are a sum of the permissions to all of the groups to which they belong. While that is easy to say, and maybe even to understand, I feel like an example always helps.
Consider that we have a single user WCAGuy that belongs to the PatternAuthors, ContentCreators, and CloudAdmins groups. The permissions for those groups are as follows:
PatternAuthors: Users in this group have permission to create and deploy patterns
ContentCreators: Users in this group have permission to create catalog content as well as create and deploy patterns
CloudAdmins: Users in this group have permission to administer the cloud, create catalog content, and create and deploy patterns
Naturally then, it follows that the WCAGuy user can administer the cloud, create catalog content, create patterns, and deploy patterns. So then, what happens if we remove the WCAGuy user from the CloudAdmins user group? Well, as you may expect, there is an update to the user's permissions. The WCAUser user can no longer administer the cloud, but they can still create catalog content, create patterns, and deploy patterns (owing to their membership in the other two groups). Similarly, if we next removed the WCAGuy user from the ContentCreators group, then the user would retain only the permission to create and deploy patterns.
Just one more thing, let's talk about what happens when I remove a user from a group and they no longer belong to any groups. Consider that I created the WCAGuy user with the permission to create catalog content as well as create and deploy patterns. Next, I added the user to the CloudAdmins group, meaning the user now has the permission to administer the cloud. I promptly decide that the user has no business with those permissions, so I remove the user from the CloudAdmins group. What happens? The user retains the permission set of the last group to which they belonged. In this case, that means the WCAGuy user retains cloud administration rights. I have to update the user's permission set if I want to take that right away, but in this case, it will not automatically disappear upon removing them from the CloudAdmins group.
I hope this helps clear up any ambiguity you may have had concerning users, user groups, and permission sets in WebSphere CloudBurst.
About two weeks ago, I had the opportunity to work with the WebSphere sMash, DB2, and Rational teams on a pretty exciting project. It started during a meeting with the sMash team in which they decided to build a sample application to demonstrate at the Web 2.0 Expo in San Francisco last week. Given the lead team the first thought was to simply show off the application at various IBM expo booths. However, we quickly decided the best way to show off the coolness of sMash was to put it in the hands of users. This led us down a path that would include Rational EGL capabilities, the WebSphere sMash Amazon Machine Image (AMI), and the DB2 AMI.
In a little over a week, we delivered a meaningful Web 2.0 application and put it in the hands of conference attendees. Using WebSphere sMash, we produced services that allowed users to view and search for booths at the conference. Each booth at the conference started with a list of keyword tags, and users could add more tags to let other users know what to expect at the booth. We also delivered a Buzz feature that displayed an aggregated feed from both Twitter and Flickr containing entries about the Web 2.0 Expo.
The Rational team, which was already working on an EGL application that would run on attendee handhelds, leveraged the services from our new sMash application, being hosted on the Amazon EC2 infrastructure, to add to their capabilities. Our decision to host the sMash application on EC2 was driven by two factors. The first was that we had virtually no time to go through the in-house server acquisition process. Second, given sMash’s capabilities to export and import applications, we were easily able to transfer our local application copy to the AMI instance with no code change. Once the application was imported into the running AMI instance, we changed a single configuration file to reference our newly running DB2 AMI instance which stored the booth data for the expo.
I just thought I’d share this example to highlight a couple of cool technologies, Rational EGL and WebSphere sMash, and to illustrate a scenario in which the IBM Amazon Machine Images deliver value. If you have any questions or want to see some of the application code, send us an email. Here's a couple of screen shots of the application:
One of my favorite things to do is create content that you, our users, can directly use to adopt and implement our products. Luckily for me, my job allows me to spend a considerable time doing just that for our WebSphere CloudBurst Appliance. In the course of this kind of work, I use multiple different mediums to hand over what I hope is helpful content to you. This includes blogs, articles, demos, and the WebSphere CloudBurst Samples Gallery.
While I like creating content for all of these forums, if I had to pick a favorite, I'm going to go with the samples gallery every time. The reason for this is simple. Users can download and directly use the content in the samples gallery. The samples gallery plays host to script packages, CLI scripts, and other tools that are ready to use with WebSphere CloudBurst (of course, one can also extend these or simply use them as reference). Further, the samples in the gallery are mostly direct responses to suggestions or requests I get from users regarding this type of content, thus increasing its usefulness and relevance.
A good example of the kinds of assets in the gallery is the latest script package I put out there. Recently, I was talking to a user and asked, 'What do you do every single time you establish a WebSphere Application Server environment?' He outlined a few different tasks, one of those being the creation of virtual hosts in the server's configuration. The creation of virtual hosts piqued my interest because many users do that, and the configuration logic itself is fairly consistent regardless of the administrator doing the task. Therefore, I set about creating a sample script package that you can use to create virtual host configuration in WebSphere Application Server.
The script package does two things. It creates virtual host entries, and it configures host aliases for these entries. The script allows the user to supply the data for the entries and aliases they want to create via a properties file. The properties file is pretty basic and allows for the configuration of multiple host aliases for each virtual host entry. Here is an example properties file:
The script package parses the data from a properties file like the one above, and it creates the appropriate WebSphere Application Server configuration. If you are using WebSphere CloudBurst and this kind of configuration task is common for your deployments, you may want to download this free sample. I also want to point out that there are quite a few more samples that are completely free for you to download in the gallery. Check them out and let me know what you would like to see in the samples gallery!
In a previous post, entitled Layers of Elasticity, I talked about the new dynamic virtual machine operations in WebSphere CloudBurst. Specifically, I showed you how to use the WebSphere CloudBurst web console to add more virtual machines (nodes) to an existing virtual system. Well, you can do this with the WebSphere CloudBurst command line interface as well.
First, let's assume I start off with a basic WAS ND environment represented by the pattern below:
When I deploy this pattern in WebSphere CloudBurst, I end up with two virtual machines: one for the deployment manager with an embedded IHS instance, one for my custom node federated into the cell. After deployment, suppose I want to use the CLI to interact with this virtual system. Assuming the name of my virtual system is Cluster, I can view my custom node virtual machine with the following CLI code:
The call to the clone function above takes care of creating a new profile and federating the new node into the cell. In addition, WebSphere CloudBurst automatically invokes any script packages from the source virtual machine marked to run at virtual system creation. All because of this single line of code!
The WebSphere CloudBurst CLI is a powerful interface that enables you to automate the function of the appliance. Check it out, become familiar with it, and make WebSphere CloudBurst processes a seamless part of your overall data center management approach.
For this post, I'm turning the tables. Usually, I try to write about things that I think are helpful, or I try to answer some pretty commonly asked questions. I hope that at least a few of these posts have been helpful, but today I am not going to take a shot at what may (or may not) be useful. Nope. Today, I want to ask you: What do you want to know?
To be clear, I'm asking this question in two scopes:
What do you want to know about WebSphere CloudBurst and our IBM Hypervisor Edition images?
What do you want to know about emerging software technologies and trends?
For the first question, you may think I'm engaging in a bit of lazy web behavior. To be fair, that may be partially true, but I really want to make sure that these blogs either continue to stay relevant for you or that they begin to become more relevant for you. I'm open for any kinds of questions, queries, feedback, etc., so please fire away.
The second question is in reference to something new we are just starting in conjunction with SMEs from the IBM labs. We are going to be posting interviews with experts from the IBM labs about the things our users (you) want to know. This could be emerging trends, common development pain points, new product offerings, or anything else that comes to your mind. Again, anything goes, so send me your thoughts, questions, ideas, feedback, etc.
So, I'm leaving you with some homework: give me some answers for these two questions. You can help to steer the direction of this blog as well as the direction of our interview sessions with IBM experts. Leave me a comment here, reach out to me on Twitter (@damrhein), or send me an email.
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
When we talk about WebSphere CloudBurst, its applicability to development and test environments usually jumps out at the audience. Using the appliance, you can provision fully configured WebSphere cells (your applications included) as a set of virtual machines in a matter of minutes. Further, a patterns-based approach means you can be sure that you are going to get consistent results every time.
The ability to very quickly and consistently stamp out customized WebSphere environments is a huge benefit for test and development purposes because these are typically dynamic. Users frequently stand up and tear down these environments to support the application development process.
This is fine, but sometimes these benefits and particular use case for the appliance lead customers to wonder how it is applicable to production environments. After all, you do not frequently setup and tear down production environments. It is much more common that you deploy your production environment and leave it be so long as you are getting the desired behavior. So, how does WebSphere CloudBurst help with your production environments?
To answer this, we have to avoid looking at the appliance's applicability to production environments in a vacuum. What do I mean? Well, as you are well aware, an application environment goes through many stages in order to get to production. For example, in your organization a given application environment may go through development, test, staging, and pre-production before you finally promote it to production.
One of the challenges as you move your application environment from one stage to the next is maintaining configuration consistency. In other words, you somehow have to ensure that the environment you tested and verified is the same one that you eventually deploy into production. This is where WebSphere CloudBurst patterns can prove invaluable.
You can build WebSphere CloudBurst patterns that represent your various application environments (from the topology to the configuration), and effectively parameterize those patterns so that they can be used across each stage of your application lifecycle. For instance, as you move an application environment from development to test, the location of backend data sources may change. Simply make this location a parameter configurable during pattern deployment, and you can reuse the pattern for both development and test. If you extend this parameterization methodology to include the variable bits of configuration for each stage in the application's lifecycle, you can reuse the pattern from development all the way to production. The result is that you can be certain the environment you test and verify is the exact same one that you put in production.
For me, the beauty of WebSphere CloudBurst is really the patterns-based approach. This approach not only makes configuring and deploying WebSphere environments faster and simpler than ever, but it also makes the standing up of such environments easily repeatable. This can mean tremendous benefits for the deployment of your applications throughout their lifecycle.
IBM Workload Deployer v3.1 firmware has been released and is available for download. V3.1 includes many improvements, building upon the solid foundation that was laid in V3.0 and earlier releases of WCA. There are many improvements and enhanced features. Dustin already alluded to a few of these in his previous post but let me list again here some of the more prominent new features:
The ground breaking capabilities offered in our Virtual Application Patterns have been extended to include deployments for AIX on PowerVM - giving you more choices for your private cloud environment. Along with this support a new base operating system image for AIX is also available for extension using either extend and capture or the IBM Image Construction and Composition Tool. Of course, Virtual System Patterns continue to be supported on all three private cloud hypervisors we support: VMWare, PowerVM, and zVM.
A new version of the Web Application Pattern Type (formerly WebApp Pattern Type) has been released. The Web Application Pattern Type V2.0 is built upon the feature rich WebSphere Application Server V8.0 release.
The DBaaS Pattern Type has been updated and is now the IBM Database Patterns 1.1 which includes both the IBM Data Mart Pattern 1.1 and the IBM Transactional Database Pattern 1.1 (OLTP - the default). These pattern types support a broader range of offerings for both production and non-production use. You can choose to create a new type of workload standard to apply to the DB instance or you can choose to clone an existing DB image that has been backed up to your DB image catalog repository.
A number of improvements have been made to the shared services leveraged by Virtual Application patterns. The caching service used to persist session data when scaling a web application can itself now be configured to scale, adjusting to increased demand. We have also extended the shared services to support external caching services and to leverage an external monitoring service based upon Tivoli Enterprise Monitoring Server (TEMS). You can also deploy multiple instances of shared services by deploying to multiple cloud groups.
The Plugin Developer Kit that was previously released to support building your own plugins and pattern types for Virtual Application patterns is now available for download directly from the IBM Workload Deployer dashboard - making it even easier to gain access and experience using this extension mechanism to deliver your own custom plugins and pattern types.
Images created using the IBM Image Construction and Composition Tool are now fully supported in IBM Workload Deployer V3.1 Virtual System patterns. Furthermore, the IBM Image Construction and Composition Tool is now a generally available product that is fully supported and available for download directly from the IBM Workload Deployer dashboard.
Speaking of Virtual System Patterns - a new hypervisor edition image of WebSphere Application Server V8 is now delivered with the appliance. WebSphere Application Server V8 fully supports the JavaEE6 programming model and includes many other programming models directly in the base image that were previously delivered only as feature packs including OSGi, JPA, and many more.
One item already mentioned by Dustin is the ability to configure multiple IBM Workload Deployer appliances in a master/slave relationship with a floating IP address to support continuous availability in the event that the master become unavailable. This feature can also be leveraged to support continuous operation while performing maintenance.
Another key appliance improvement is increased appliance security through the introduction of several new security roles for separation of duties. This is to ensure that no single user has unrestricted control without oversight. Among the new roles is an auditing role and auditing operations to provide data for forensic analysis of security attacks and better assist with compliance with the Health Insurance Portability and Accountability Act (HIPAA) and the Sarbanes Oxley Act (SOX).
We believe that these new features and several more make the value proposition delivered by IBM Workload Deployer V3.1 an even more compelling offering that can increase agility, consistency, and time to value for your applications. You can download IBM Workload Deployer V3.1 from IBM Fix Central. Please let us know what you think!
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
I've blogged previously about some of IBM's work in the public cloud and specifically on our partnership with Amazon to deliver IBM offerings on the Amazon EC2 cloud. Mostly on this blog I've been focused on IBM WebSphere offerings on the Amazon cloud, but coming up on October 1st, you'll get a chance to hear about and see the full breadth of IBM software offerings available on the Amazon EC2 cloud. Better than simply hearing and seeing, by attending the virtual developer's day, you'll get access to try out some of this software absolutely free!
By leveraging IBM software on Amazon EC2, users can very quickly benefit from the advantages of a cloud computing approach to IT. Instead of focusing valuable time and resource on installing, updating, and otherwise maintaining software, users can simply activate instances of the IBM software of their choosing on Amazon's infrastructure. Besides delivering this rapid approach to getting up and going, users can also leverage cloud computing techniques to quickly and dynamically scale up and down their entire application infrastructure. This ability to dynamically scale up and down means your end-users will always enjoy a satisfactory experience when accessing your applications on the cloud.
You can sign up for the Cloud Computing for Developers day here. In the meantime you can learn more about IBM offerings on the Amazon EC2 cloud by visiting the IBM/Amazon EC2 landing page. I hope you can take advantage of a chance to hear both IBM and Amazon experts and learn how IBM software delivered on the Amazon EC2 cloud can make a real difference for your business.
Jason McGee will be leading the second GWC Lab Chat this week on Wednesday, 4/20. The very timely topic is related to recent announcements from IBM regarding the IBM Workload Deployer (see previous posts). Entitled "Application-Centric Cloud Computing" the discussion will focus on the concept of deploying and managing your application workloads in a shared, self-managed environment rather than manually creating and managing the application middleware topologies. It places the focus on the application rather than the infrastructure. This concept promises to deliver greater simplicity, elasticity, and
density among other things. It can position your business to react more
quickly and efficiently to the increasing demands of your customers and
free you from the managing all of the details.
Many of you may have already heard Jason speak last week at IMPACT 2011 in the cloud mini main tent or perhaps at any number of other sessions that Jason was involved in. Jason is the key architect behind IBM's WebSphere cloud activities. Obviously, Jason understands the cloud space very well and has a clear view of the evolution into Application-Centric Cloud Computing. This GWC Lab Chat will provide the opportunity to get your questions answered and share your perspective on this technology.
Jason will provide a brief introduction to the concepts and ideas and then lead an open discussion. Put it on your calendar and plan to attend - and please plan to bring your questions and comments to help foster a rich discussion. We want to hear from you.
If you haven't registered yet it is not too late - learn more and register here. It is easy to register and there is no cost. This is a very timely event and a great way to dig a little more deeply into concepts you first heard at IMPACT or perhaps hear them for the first time. Don't miss it!
In previous posts, I have discussed the integration capability between WebSphere CloudBurst and Tivoli Service Automation Manager. Most recently, I discussed this in the context of integrating WebSphere and IBM CloudBurst. Today, I am happy to announce the publication of an article I co-wrote with Marcin Malawski from TSAM development on the subject of this integration.
If you are a WebSphere user interested in a holistic approach in building out a private cloud, I strongly recommend that you check the article out. If you are currently an IBM CloudBurst, IBM Service Delivery Manager, or Tivoli Service Automation Manager user and you provision a significant number of WebSphere environments, I strongly recommend that you check the article out. In fact, regardless of your current situation, do me a favor and check the article out!
As always, I look forward to feedback and comments. Good, bad, or indifferent. You can leave your comments here or on the article page. I look forward to hearing from you!