Not long ago I created a demonstration that highlighted the new support for the PowerVM platform introduced in WebSphere CloudBurst 1.1. In that demonstration I showed how you can deploy to a PowerVM cloud by defining a new cloud group that interfaces with a VMControl instance to manage a pSeries cloud environment. However, in the demo I did not go into much detail about the components of a pSeries cloud used with WebSphere CloudBurst.
Since pictures help me out a lot, I thought I’d start the discussion with an image that depicts the components in the pSeries cloud environment and the workflow when using WebSphere CloudBurst to deploy systems to this environment.
The workflow begins when a user requests the deployment of a pattern and targets that deployment for a PowerVM cloud group. WebSphere CloudBurst first checks that the cloud group contains the compute resources necessary to deploy the pattern. After the resource checks are complete, WebSphere CloudBurst decides where to place each virtual machine that will be created from deployment using its intelligent placement algorithm. No matter the type of the cloud environment being utilized the appliance retains control over placement decisions, thus ensuring the virtual system has been deployed in a way that optimizes both performance and availability.
Once the placement decision has been made, WebSphere CloudBurst communicates with the VMControl instance, which in turn instructs the Hardware Management Console (HMC) to create LPARs on the targeted pSeries machines. These LPARs will host the virtual machines that represent the WebSphere Application Server nodes in your virtual system. After the LPARs have been created, WebSphere CloudBurst leverages VMControl to instruct the Network Installation Manager (NIM) to deploy virtual images to the necessary LPARs.
When the LPARs have been created and the virtual images have been deployed to those LPARs, the common process of virtual system creation can proceed. This process includes starting virtual machines, starting WebSphere Application Server components, and running any user-supplied scripts. The end result is a ready to use, virtualized WebSphere Application Server cell running on the PowerVM hypervisor platform.
I hope this provides a nice overview of the underlying environment when PowerVM hypervisors are used with WebSphere CloudBurst. As for those users who are not WebSphere CloudBurst cloud administrators, the information above is nice to know but not necessary. The user experience with respect to building, deploying, and managing your virtualized application environments with WebSphere CloudBurst is consistent regardless of the type of your cloud platform.
When I talk to users familiar with both WebSphere CloudBurst and the IBM Systems Director VMControl offering, there is sometimes a bit of confusion. It is not surprising. Both WebSphere CloudBurst and IBM Systems Director VMControl allow users to create and manage virtualized environments. That leads us to an oft-asked question: What is the difference between WebSphere CloudBurst and IBM Systems Director VMControl?
The simple answer is that the difference in the two offerings is the degree to which they are purpose-built. IBM Systems Director VMControl equips users with broadly applicable capabilities to create and manage environments consisting of virtual machines. These capabilities extend to PowerVM, z/VM, VMware, and Microsoft Hyper-V hypervisor platforms. IBM Systems Director VMControl is not necessarily knowledgeable about the software running in the virtual machine, but it does allow the user to manage that asset effectively.
Compare and contrast that with the capabilities provided by WebSphere CloudBurst. The appliance also enables users to create and manage environments consisting of virtual machines. The difference is that WebSphere CloudBurst is purpose-built to provide you with the ability to create, deploy, and manage virtualized WebSphere environments quickly and easily.
What does that mean? Well, on one hand it means that WebSphere CloudBurst does not treat the virtual machines it creates like a black box. In fact, it knows quite a bit about the software running inside those machines, and provides users with out-of-the-box configuration and administration capabilities for said software. WebSphere CloudBurst knows how to interact with the software in the virtual machines to do things like federate WebSphere nodes into a cell, create application server clusters, configure environments for optimal performance, apply fixes and upgrades, and more. The best part is you do not need to supply any of your own scripts to do this. In short, the appliance ships with WebSphere intelligence.
Beyond this WebSphere intelligence, WebSphere CloudBurst enables users to create customized WebSphere environments (from the operating system up) and codify those customized environments in the form of patterns. These patterns, which represent your very own WebSphere application environments, enable you to deploy your applications rapidly, repeatedly and with extremely consistent results. In addition, the appliance allows you to define varying roles for users, each of those mapping to traditional data center responsibilities (i.e. customizing the operating system, building application infrastructure, carrying out middleware customizations, etc.). Again, WebSphere CloudBurst was purpose-built with WebSphere environments in mind.
It is not all about comparing and contrasting WebSphere CloudBurst and IBM Systems Director VMControl. In the case that you are using WebSphere CloudBurst to create and manage virtualized WebSphere environments on top of the PowerVM hypervisor platform, IBM Systems Director VMControl is actually a required component. In this scenario, the two offerings are complementary. WebSphere CloudBurst communicates with IBM Systems Director VMControl in order to create and configure the virtualized WebSphere environment requested by the user. This image below depicts how the two products work in conjunction in a PowerVM environment.
I hope this helps to shed light on how WebSphere CloudBurst compares to, contrasts with, and complements IBM Systems Director VMControl. Feel free to reach out to me on the blog or on Twitter (@damrhein) with any questions I did not answer here.
Application-centric cloud computing is the main thrust behind the new capabilities of IBM Workload Deployer v3.0. But what does that really mean? After all, application-centricity is really just a concept. Granted, it is an important concept, but it is fairly meaningless until it is put into action or implemented. IBM Workload Deployer does just that with its new Virtual Application Patterns (VAPs).
VAPs are the embodiment of the workload pattern approach I briefly discussed in an overview post a few weeks back. The idea with a VAP is to give the user an interface through which they can provide their application, specify dependencies, declare functional and non-functional requirements and then deploy. Of course application middleware is a part of the overall solution, but IBM Workload Deployer has the smarts to build, configure, and integrate the necessary infrastructure in order to support the user's application. This is completely hidden from the user, so they are liberated to focus on the application and its requirements.
If we scratch a bit further beneath the surface of a VAP, we see that these patterns contain three primary pieces. These primary pieces are components, links, and policies, and they are fundamental to understanding how virtual application patterns work. Let's start with the building blocks of VAPs, components. Put simply, components represent different resources and functionality profiles that make up your application environment. As an example, the IBM Workload Deployer Pattern for Web Applications is a VAP that contains components for an EAR file, WAR file, message queue, and any number of other components that are typical requirements for a web application. The components will certainly vary based on the workload type (i.e. the components included in a web application VAP would be different than those included in a batch application VAP), but they are the foundation of any VAP.
From the ground up, the next logical element we come to in the VAP is a link. A link is a way to declare a dependency or integration point between two components. As an example, consider a VAP with a WAR file component and a database component. You might draw a link between the WAR component and the database component to indicate that your web application uses or otherwise depends on the database. IBM Workload Deployer interprets this link, and takes it as a directive to configure the integration between the two components as a part of deployment. In this case, that may mean configuring a data source in the application's container. This is just a simple example, and an application may have any number of links between components.
Finally, we come to the policy element within the VAP. A policy is a way for a user to specify functional and non-functional requirements for their application environment. Users attach policies to the VAP, or to components in their VAP, and IBM Workload Deployer interprets and enforces those policies. In the context of a web application, one example of a policy could be a scaling policy. The scaling policy might indicate scaling requirements for the application that included minimum application instances, maximum application instances, and conditions that triggered scaling activities. IBM Workload Deployer would use the information in a scaling policy within a VAP to appropriately manage the deployed, running environment. Other examples of a scaling policy may include a JVM policy that provides configuration directives for the java virtual machines in your application environment or a logging policy that defines logging configuration options. In any case, the policy element allows VAP builders to influence the configuration and management of the application environment.
In the example VAP below you can see the use of components (Enterprise Application, Database, User Registry, Messaging Service), links (blue lines between components), and policies (Scaling Policy, JVM Policy):
In total, when I look at a VAP a particular word sticks out to me: declarative. VAPs really enable declarative, application-centric cloud computing. What do I mean? By declarative, I mean you are telling IBM Workload Deployer what you want, but not necessarily how you want it done. It is the job of IBM Workload Deployer to take care of the how. This shift in approach to application environments enables the potential for significant savings, and more importantly to me, lays the foundation for a more agile, flexible approach to deploying and managing application environments.
There will be more in the weeks and months to come on IBM Workload Deployer, so stay tuned. I also want to put a plug in for a new blog from Jason McGee. For those that do not know Jason, he is an IBM Distinguished Engineer, and the lead architect behind IBM Workload Deployer. Be sure to check out his blog for insights on this new offering, as well as for all things cloud.
When writing a new tool for the WebSphere CloudBurst samples gallery last week, I got the chance to use an API in the CLI that was new to me. Specifically, I got a chance to use the WebSphere CloudBurst CLI in order to retrieve an audit log from the appliance for a specified date period. In case this is new and interesting to you, I thought I would share what I found.
First off, let's take a look at the API I am talking about. It's pretty simple: cloudburst.audit.get(file, start, end). Here, start is the start date for the audit entries and (naturally) end is the end date for those entries. The file parameter simply denotes the location or file object you want to use to store the audit archive retrieved via the get method.
This is a simple enough API. The only wrinkle comes in dealing with calculating the start and end dates. According to the WebSphere CloudBurst Information Center, both the start and end times are 'specified as the number of seconds since midnight, January 1, 1970 UTC. Floating point values can be specified to indicate fractional seconds.' For my use case, I wanted to let a user or calling program pass the start and end times as arguments to the CLI script that retrieves the audit archive. Check out the relevant portion of my script below:
As you can see, the script takes in the start and end time in the MM/dd/yy HH:mm format (i.e. 05/20/10 15:30). It parses the value to produce a date, gets the long value of the date (which is in milliseconds according to the java.util.Date API), and divides that value by 1000. This is to account for the fact that the cloudburst.audit.get method expects you to express the start and end times in seconds. The script passes the converted dates along with the output file location to the get method. The result is a ZIP file that contains an appliance audit, license audit, and PVU audit file for the specified date range.
One of my favorite things about the WebSphere CloudBurst CLI is that it is Jython-based. This means I can leverage Java APIs from my CLI scripts, and that is huge for me because of my existing knowledge of the Java language. You certainly can substitute Python APIs for my use of Java APIs to handle the start and end date calculation. I hope this is helpful, and good luck with the WebSphere CloudBurst CLI!
Over the past several months industry focus on cloud computing seems to have only intensified. Within IBM and for the purposes of this blog, WebSphere, there have been several announcements and offerings that indicate our commitment and belief in the cloud computing approach.
To further highlight WebSphere's focus and offerings in the cloud computing realm, we are embarking on a "WebSphere in the Clouds" campaign during the months of September and October. Our intent is to virtually deliver information about our cloud strategy and offerings directly from the experts to you, our WebSphere users.
The event will be kicked off by WebSphere's Director of Product Management, Kareem Yusuf, on September 23rd from 9-10 EDT. Kareem will talk about cloud computing in the enterprise, and its unique relationship to SOA thoughts and principles. In addition, he'll give an overview of what WebSphere has been doing in the cloud computing space. This will be followed by sessions from technical experts that detail WebSphere offerings in both the public and private clouds, as well as sessions that discuss enablers of application and application infrastructure elasticity.
To find out more about the "WebSphere in the Clouds" campaign, you can check out the main announcement page. To sign up for the series of virtual events visit the registration page. We hope you will join us for the series of webcasts to learn all about WebSphere's work in the clouds.
A couple of weeks ago, I dropped by the Intel Developer Forum to present a session and listen in on a few others. As always in these types of shows, I learned quite a bit. Most strikingly though, I was reminded of something that is probably quite obvious to many of you: Consumer interest in cloud computing will not be letting up any time soon.
Based on this, and some of the other things I heard at the show, I decided to catch up with fellow IBMer Marc Haberkorn. Marc is an IBM Product Manager and is responsible for IBM Workload Deployer amongst other things. I asked him about IBM Workload Deployer, the competition, and cloud in general. Check out what Marc had to say below:
Me:IBM Workload Deployer is one among many of a growing wave of cloud management solutions. How do you differentiate the focus and business value of it versus the myriad of other solutions out there?
Marc: To sum it up, we offer a combination of depth and breadth. IWD delivers both workload aware management and general purpose management. Workload aware management differentiates IWD from its competition, as it can deliver more value for the set of products for which it has context. There is a set of actions that workload aware management tools can do that is normally left to the user by general purpose management tools. This list includes configuring a middleware server to know its hostname/IP address, configuring multiple middleware servers to know of one another, arranging clusters, applying maintenance, and handling elasticity. By handling more of these activities in the automated flow, there are fewer chances for manual errors and inconsistencies to enter a managed environment.
That said, without infinite resource or time, it’s impossible to deliver this context-aware management for everything under the sun. As such, in order to allow IWD to deliver differentiated value AND allow it to handle a customer's entire environment, we offer a mix of workload-aware management and general purpose management.
Me:VMware is a good example of a company active in the cloud space, and they seem to keep a consistent pace of new product delivery. What do you think of their product development focus?
Marc: I think VMware has built a very compelling set of capability in the virtualization space. I think the main difference between VMware's suite and IBM Workload Deployer is the perspective from which the environments are managed. VMware puts the administrator in the position of thinking about infrastructure from the ground up. The administrator is thinking about virtual images, hypervisors, and scripts. In IBM Workload Deployer, we think about things from the perspective of the app, because that's ultimately what the business cares about. By providing a declarative model through which an application can be instantiated and managed, we feel we deliver a deeper value proposition to clients, through workload-aware management.
Me:The 'one tool to do it all' approach is a popular, if not hard to achieve goal. What is your advice to users when it comes to choosing between breadth and depth for cloud management solutions?
Marc: The advantages of a "one tool to do it all" are many: less integration, more uniformity, less complexity. As such, customers will always prefer a single tool when possible. This is why IBM Workload Deployer has focused on not only providing differentiated, deeper value for common use cases but also providing a way to handle the "everything else." As such, my advice to users is not to choose between breadth and depth - use IBM Workload Deployer which offers both.
Me:To close, I'm curious to know where you think we are heading in the cloud market. What do you think users will be most readily adopting over the next one to two years? Where does the cloud industry need the most innovation?
Marc: I think most users are currently looking at the broad picture of cloud computing, and have been adopting primarily in the private cloud realm. There are several reasons for this. One reason is that many customers have a large set of hardware resources which amount to sunk cost that needs to be leveraged. Another reason is around data security concerns in off-premises clouds, and still another reason is around the human factor of comfort, which has taken time to develop around off-premise cloud models. However, businesses have become increasingly comfortable with various sources of outsourcing in recent years, especially in mission critical areas involving very sensitive data. Just look at IBM's Strategic Outsourcing business, which handles entire IT operations for many large businesses. I think that trend will (and really, has already begun to) continue in the area of cloud computing, and will lead to more public and ultimately hybrid cloud computing adoption. In order to get to hybrid cloud computing, I see much of the focus and innovation being associated with data security, workload portability (across private and public, in a seamless fashion), and license transferability between private and public. When this space reaches fruition, clients will be able to enjoy true elastic economics in a computing model that allows a mixture of owning and renting compute resources and software licenses.
I spent most of my time growing up doing two things, going to school and playing sports. I made many fond memories -- mostly from the latter :) -- and learned more than a few lessons over that time. Of all of those lessons, there was one in particular that stuck out in both the classroom and on the baseball diamond: Sometimes you have to get back to the basics.
In that vein, I think it is time to revisit the basics of WebSphere CloudBurst. In revisiting the basics, I am not talking about the technical basics of the appliance. Rather, I am talking about revisiting exactly why WebSphere CloudBurst exists in the first place. In other words, let's take a look at the problem domains WebSphere CloudBurst addresses, and let's discuss a little bit about how the appliance does so.
In keeping with the impressive release pace, WebSphere CloudBurst 22.214.171.124 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 126.96.36.199, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 188.8.131.52 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 184.108.40.206, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 220.127.116.11, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
In my last post, I concentrated on the new enhancements to WebSphere CloudBurst 18.104.22.168. One of the major new additions was the introduction of Environment Profiles, and I promised a developerWorks article would be forthcoming. The article is now live along with a demo that showcases the capability of environment profiles.
As I mentioned in my last post, environment profiles center around giving you more customization capability during the pattern deployment process. In WebSphere CloudBurst, the pattern deployment process consists of the five main steps depicted below.
Traditionally, WebSphere CloudBurst controlled the entire deployment process, thus closing it off to the deployer. Environment profiles extend the customization reach of users to be able to effect steps 1-3 in the above diagram. Specifically, environment profiles give you the following control:
Control over the assignment of IP addresses and hostnames to pattern parts: Instead of having WebSphere CloudBurst automatically assign IP addresses, and thus hostnames, to virtual machines during deployment, you can explicitly set both values during the deployment process.
Ability to deploy single patterns to multiple cloud groups: Previously, when deploying a pattern you selected a single cloud group and WebSphere CloudBurst deployed all the parts in the pattern to machines within that cloud group. While this may be okay for many cases, other cases may require you to deploy some parts of the pattern to one group of machines while other parts map to a separate set of machines. Before environment profiles, you could accomplish this with multiple patterns. With environment profiles, you can accomplish it with a single pattern.
Ability to supply virtual machine naming standards: As part of deploying a pattern, WebSphere CloudBurst creates one to many virtual machines with distinct names. Environment profiles allow you to supply a naming standard that WebSphere CloudBurst will use when creating the machines as opposed to default naming schemes previously used.
It is important to note that the use of environment profiles is completely optional, and you can continue to use the traditional deployment process, thereby leaving WebSphere CloudBurst in control. That said, the introduction of environment profiles is a direct response to consistent user feedback we received regarding the need for more control during the deployment process. Based on my user conversations, these profiles address many of said needs in an easy to use, straightforward manner. We are, of course, eager to know what you think. As always, you can let me know right here, through email, or on Twitter (@damrhein).
If you follow this blog often, you know that from time to time I like to post frequently asked questions. Well, it's been a while since I have done that, and since then I have added some new questions to my list -- along with some regulars. Take a look below, and if I don't answer your question feel free to leave a comment!
Can IBM Workload Deployer deploy software that is not IBM software? Yes. You can use one of the included images as a springboard and customize them with your own software via extend and capture. Additionally, you can use the IBM Image Construction and Composition Tool (I'm getting ahead of myself here) to create your own custom images from the ground up and use those within IBM Workload Deployer.
Can I use VMotion for the systems I deploy with IBM Workload Deployer? Yes. IBM Workload Deployer has tolerated the use of VMotion since the WebSphere CloudBurst days (see the Additional Considerations section on this page for more information). IBM Workload Deployer v3 introduced the notion of virtual machine mobility initiated directly from the appliance. This capability takes advantage of VMotion in the case of VMware-based cloud environments.
Can IBM Workload Deployer deploy just a base operating system? Yes. IBM Workload Deployer v3 introduced a base operating system image that contains 64-bit Red Hat Enterprise Linux. Internally, IBM Workload Deployer uses this as the foundation on top of which virtual application patterns are deployed. You can use it to deploy virtual machines containing just the base OS, or you can customize it to deploy software of your choosing. (As an aside, IBM Workload Deployer v3.1 will include a base operating system image for AIX)
Can I automate the process of calling/using IBM Workload Deployer? Yes. IBM Workload Deployer is built to fit a specific need -- creating and managing a cloud of middleware and middleware-based workloads. In that light, it would be a shortcoming if IBM Workload Deployer did not to fit well into more holistic or enterprise-wide cloud management systems. The REST API and CLI allow you to automate the use of IBM Workload Deployer, thereby allowing it to be mashed up into other processes.
Can I group two appliances together for high availability? Yes. IBM Workload Deployer v3.1 introduces the ability to configure appliances in a master/slave setup. You can connect two appliances, allow them to share a floating IP address, and be confident that data is continuously replicated between the two. If one appliance fails, the other appliance picks up the floating IP ensuring continuous service.
Are images created using the Image Construction and Composition Tool supported for use within IBM Workload Deployer? Yes. Part of the new IBM Workload Deployer 3.1 announcement was a statement of support for using images created by the Image Construction and Composition Tool as a component of your virtual system patterns. This is a very important enhancement as it allows you to extend the set of content deployed by IBM Workload Deployer while being sure that you are operating within the boundaries of intended use.
Can I use IBM Workload Deployer to provision to public clouds? No... and yes. If you install an IBM Workload Deployer appliance in your datacenter, you cannot use it to deploy to a public cloud environment. However, you may have recently heard about the IBM SmartCloud Application Services portfolio. IBM has announced that the pattern-based provisioning that one gets with IBM Workload Deployer will also be available as part of this portfolio. This means that you will be able to build and deploy patterns using a service hosted on the IBM SmartCloud. Further, your deployed systems will run on the IBM SmartCloud. Check out this demo for more information.
** IBM Workload Deployer 3.1 firmware is available on 11/18.
Yesterday, we kicked off a WebSphere in the Clouds campaign designed to connect you with IBMers that can help you to leverage WebSphere solutions to build clouds. The campaign consists of webcasts, podcasts, live Q&A sessions, and online JAMs. You can listen to replays and sign up for upcoming events by visiting the Global WebSphere Community website.
Next week, the campaign delivers a series of podcasts that discuss the WebSphere technologies that form the building blocks of clouds. These podcasts will discuss both the business and technical aspects of these solutions, and they will cover topics like application infrastructure in the cloud, policy-based workload management using application virtualization, hybrid cloud integration, and more. Over the past few days, I had the opportunity to catch up with the various presenters of these podcasts to ask them a few questions about their solutions. These interviews provide a nice sneak peak at what is coming in the podcasts, and I will be posting them here in the coming days.
To kick things off, I'm posting a video interview with Marc Haberkorn. Marc is the WebSphere Product Manager for WebSphere CloudBurst, WebSphere Application Server Hypervisor Edition, and WebSphere Virtual Enterprise. My colleague, Ryan Boyles, caught up with Marc and got his thoughts on how these solutions enable virtualization and automation for your cloud environments. Enjoy!
I point this out about script packages because recently I put one together that is not a WebSphere Application Server administration task, but does provide configuration logic common to many WAS deployments. Specifically, I put together a script package that configures an IBM HTTP Server to be a reverse proxy server. This of course, allows clients to send requests to the IBM HTTP Server and have those requests pass through to a specified back-end destination (i.e. a service hosted on WebSphere Application Server) based on URI paths.
The script package is not all that different from many of the ones I put together. It contains a shell script (which provides configuration and orchestration logic) as well as a cbscript.json file that defines the script package's characteristics when I upload it into WebSphere CloudBurst. The notable difference in this script package is that I include a Perl script that modifies the IBM HTTP Server configuration file. This just reiterates the point that you are not limited to only wsadmin and shell scripts within your script packages.
The workings of the script package are quite straightforward. It starts with a call to the shell script that modifies the IBM HTTP Server's configuration file to ensure the loading of a couple proxy modules:
sed -i s/"#LoadModule proxy_module modules\/mod_proxy.so"/"LoadModule proxy_module modules\/mod_proxy.so"/g $HTTP_CONF
sed -i s/"#LoadModule proxy_http_module modules\/mod_proxy_http.so"/"LoadModule proxy_http_module modules\/mod_proxy_http.so"/g $HTTP_CONF
As you can see, the createProxy.pl script accepts a single argument. This argument represents the reverse proxy configuration information provided by the user during deployment. The Perl script parses the single argument and creates the appropriate proxy directives in the IBM HTTP Server's configuration file:
After the invocation of the script above, control returns to the shell script. The shell script restarts the IBM HTTP Server so that the configuration changes take place. The result is an up and running IBM HTTP Server acting as a reverse proxy based on information supplied during deployment. The listings here do not show the full script package, but I hope to have it up on our WebSphere CloudBurst Samples Gallery soon.
If the script above provides some configuration logic you can use, that is good. However, my main point for bringing it up here is to point out that WebSphere CloudBurst script packages can be more than shell and wsadmin scripts that perform WebSphere Application Server configuration tasks. You can use them to do any sort of scripted activity that is essential to your application middleware deployment process. Happy scripting!
The 1.1.1 version of WebSphere CloudBurst is now available on the IBM support site, and you can read a bit about it here. I have not blogged about each and every point release of WebSphere CloudBurst here, but this particular one is significant. The 1.1.1 release adds support for IBM's z/VM hypervisor platform as a deployment target.
Quite simply this means that you can now create virtualized WebSphere application environments on the z/VM platform using WebSphere CloudBurst. This starts by first defining target hypervisors, instances of Linux Master Systems, that WebSphere CloudBurst can communicate with to setup virtual machines on z/VM. Coupled with support for the z/VM infrastructure components, there is a new version of the WebSphere Application Server Hypervisor Edition virtual image. While this new image contains the same basic components as the previous hypervisor edition images, it is packaged for the z/VM platform, and it includes a zLinux operating system.
Once you upgrade to WebSphere CloudBurst 1.1.1, you can define your z/VM infrastructure and use the new WebSphere Application Server Hypervisor Edition image to build custom patterns targeted for the z/VM platform. I put together a demonstration that provides a very brief overview of these new capabilities. As always, please reach out if you have any questions about this or any other WebSphere CloudBurst topic.
One of the most exciting announcements at IBM IMPACT last week was that of the new WebSphere Process Server Hypervisor Edition. This new virtual image allows you to provision complete WebSphere Process Server environments into your on-premise cloud using the WebSphere CloudBurst Appliance. Just like with the other environments you can provision using WebSphere CloudBurst (namely WebSphere Application Server, DB2, and Portal Server), you can stand up these WebSphere Process Server environments in a matter of minutes.
The WebSphere Process Server does not come pre-loaded on the appliance, but it does come with a cool utility that helps you get it on the appliance. The WebSphere Process Server Hypervisor Edition loader provides a wizard-like tool that loads the image into the catalog of an appliance you specify. The tool is simple to use and is included as part of the image package that you download from Passport Advantage.
Not only does the loader above populate the WebSphere Process Server Hypervisor Edition into the appliance's catalog, but it also creates a set of patterns for the WebSphere CloudBurst Appliance. These patterns encapsulate golden topology environments for WebSphere Process Server Hypervisor Edition. At the time of my post, the patterns created by the loader include the following:
Standalone server: This pattern represents a single server instance of WebSphere Process Server. Deployment of the pattern results in a single virtual machine that contains both the server instance and a DB2 instance.
Simulated environment: This pattern contains a single part called a 'Full function control node'. Deployment of the pattern results in the creation of a deployment manager, proxy server, DB2 environment, and three WebSphere Process Server clusters (application target cluster, support cluster, and messaging cluster), all in a single virtual machine.
Scalable environment: This pattern contains a deployment manager, 'Basic function nodes' part, DB2 part, and a proxy server. Deploying the pattern results in the same components as the pattern above, but in this case each component resides in its own virtual machine.
The announcement of the WebSphere Process Server Hypervisor Edition only serves to increase the applicability of WebSphere CloudBurst for constructing on-premise WebSphere clouds. If you have any questions, or want to learn more about this new virtual image, please let me know.
For the last post in my FAQs Revisited series, I'm going to cheat a little bit. Instead of addressing one particular question, I'm going with a grab bag of a few different questions. These are questions that I get asked quite frequently, but do not demand an entire blog post explanation. Let's get on with it.
Question: Do the new software license management capabilities provided in WebSphere CloudBurst 2.0 depend on ILMT or other supporting components?
Answer: No. The license management features are completely standalone. Of course, you can still take advantage of ILMT (through easy integration in WebSphere CloudBurst I might add) to track licenses in your cloud if you so choose.
Question: Can I deploy a pattern, make changes to my virtual system, and then recapture that as an updated pattern?
Answer: You cannot do this with WebSphere CloudBurst alone, but you can use WebSphere CloudBurst in conjunction with the Rational Automation Framework for WebSphere to do just this. Check out this article (shameless plug alert!).
Question: What if I have an urgent operating system fix to apply before IBM delivers an update to the OS in the Hypervisor Edition image?
Answer: You can either manually apply the fix to the appropriate virtual machines, or you could package up the fix as a custom WebSphere CloudBurst fix, load it into the catalog, and use the appliance to automate the application of said fix.
Question: Can I change the install location for WebSphere Application Server in the virtual image?
Answer: I've just shown you all this really cool, useful, and easy to use stuff, and you worry about install locations? Seriously though, I understand the genesis of this question usually has to do with existing scripts that assume a certain install location for WebSphere Application Server. I certainly do not advocate changing those scripts, but you cannot change the install location for WebSphere Application Server in the images. There is nothing to keep you from creating a symbolic link however.
Question: Once I deploy a pattern, what do I need to do to add more processing capacity (i.e. more application server processes)?
Answer: You have a couple of options here. You can use normal WebSphere administration techniques to add more application servers to an existing node. If that will not work (perhaps a particular node is operating at max capacity), you can use the new dynamic virtual machine operations in WebSphere CloudBurst to add an entirely new node/virtual machine. If you find yourself consistently making these types of adjustments to the runtime environment based on ebb and flow of demand, you may also want to consider the Intelligent Management Pack option for WebSphere Application Server Hypervisor Edition.
I hope this FAQs Revisited series was helpful. Stay tuned for a look at some recent work I did to integrate WebSphere CloudBurst deployments with the new WebSphere DataPower XC10 appliance.