The answer is yes, I did a related but different blog post with a similar title a few weeks back. At that time I was primarily highlighting a webinar that I co-presented with Keith Smith regarding the various virtualization solutions and features that are available in IBM Workload Deployer in virtual application patterns and virtual system patterns leveraging the Intelligent Management Pack (IMP). If you didn't get a chance to attend that webcast live then I encourage you to check out the replay (especially Keith's portion with details on IMP - a really helpful overview).
This new blog post expands on the theme of that original blog post but takes a broader vision of where IBM has been with our private cloud offerings in WCA and IWD up to and including the recently announced IBM PureApplication System - and how this history demonstrates our leadership in supporting applications in the cloud.
In a recent post, Joe Bohn detailed some of the new capabilities and enhancements that come along with the recently delivered IBM Workload Deployer v3.1. To be sure, there are many valuable new features such as PowerVM support for virtual application patterns, the Plugin Developer Kit, WebSphere Application Server Hypervisor Edition v8, and more. Each of these topics probably merit their own post, but today I want to talk about something I did not mention above. Specifically, I want to talk about the announcements regarding the IBM Image Construction and Composition Tool (ICCT) and what that means for IBM Workload Deployer users.
You may have read an earlier post that I wrote about the ICCT, but allow me a brief overview here. In short, the ICCT enables the construction of custom virtual images for use in IBM Workload Deployer. You use the tool to create virtual images, much like IBM Hypervisor Edition images, and then you can use those custom images (containing whatever content you need) to create your own custom virtual system patterns. The key point about the custom images you create with the ICCT is that they are dynamically configurable. That is, the tool helps you to create the images in such a way that you can defer configuration until deploy time rather than burning such configuration directly into an image. For those of you familiar with virtual image creation, you know this type of 'intelligent construction' is a huge step towards keeping image inventory at a reasonable level.
Okay, enough of a general overview for now. Let's talk about the two new items of note regarding IBM Workload Deployer v3.1 and the ICCT. The first thing you should know is that starting in IBM Workload Deployer v3.1, the ICCT is shipped with the appliance. This means that you do not need to go anywhere else in order to get your hands on the tool to start creating your custom images. You simply log into IBM Workload Deployer and click the download link on the appliance's welcome panel (shown in image below).
Getting your hands on the tool is one piece of the puzzle, but using it is quite another. While the ICCT has been available as an alphaWorks project for some time, that also implies that there has never been official support for the tool. That changes starting with IBM Workload Deployer v3.1. The ICCT is now a generally available product from IBM, and that means that it is fully and officially supported as well. Further, the images you create using the tool are also officially supported for use as building blocks of your IBM Workload Deployer virtual system patterns. For many of you who have been using the ICCT for some time, but have been hesitant to expand use because of the lack of a formal support statement, you should now feel free to charge forward!
I hope this helps clear up exactly what the new Image Construction and Composition Tool announcements that were part of IBM Workload Deployer v3.1 actually mean. I cannot wait to hear about how you all are putting the ICCT to use with IBM Workload Deployer. Finally, don't forget to send us any questions, comments, or other feedback that you may have regarding this or any other new feature in IBM Workload Deployer v3.1!
If you follow this blog often, you know that from time to time I like to post frequently asked questions. Well, it's been a while since I have done that, and since then I have added some new questions to my list -- along with some regulars. Take a look below, and if I don't answer your question feel free to leave a comment!
Can IBM Workload Deployer deploy software that is not IBM software? Yes. You can use one of the included images as a springboard and customize them with your own software via extend and capture. Additionally, you can use the IBM Image Construction and Composition Tool (I'm getting ahead of myself here) to create your own custom images from the ground up and use those within IBM Workload Deployer.
Can I use VMotion for the systems I deploy with IBM Workload Deployer? Yes. IBM Workload Deployer has tolerated the use of VMotion since the WebSphere CloudBurst days (see the Additional Considerations section on this page for more information). IBM Workload Deployer v3 introduced the notion of virtual machine mobility initiated directly from the appliance. This capability takes advantage of VMotion in the case of VMware-based cloud environments.
Can IBM Workload Deployer deploy just a base operating system? Yes. IBM Workload Deployer v3 introduced a base operating system image that contains 64-bit Red Hat Enterprise Linux. Internally, IBM Workload Deployer uses this as the foundation on top of which virtual application patterns are deployed. You can use it to deploy virtual machines containing just the base OS, or you can customize it to deploy software of your choosing. (As an aside, IBM Workload Deployer v3.1 will include a base operating system image for AIX)
Can I automate the process of calling/using IBM Workload Deployer? Yes. IBM Workload Deployer is built to fit a specific need -- creating and managing a cloud of middleware and middleware-based workloads. In that light, it would be a shortcoming if IBM Workload Deployer did not to fit well into more holistic or enterprise-wide cloud management systems. The REST API and CLI allow you to automate the use of IBM Workload Deployer, thereby allowing it to be mashed up into other processes.
Can I group two appliances together for high availability? Yes. IBM Workload Deployer v3.1 introduces the ability to configure appliances in a master/slave setup. You can connect two appliances, allow them to share a floating IP address, and be confident that data is continuously replicated between the two. If one appliance fails, the other appliance picks up the floating IP ensuring continuous service.
Are images created using the Image Construction and Composition Tool supported for use within IBM Workload Deployer? Yes. Part of the new IBM Workload Deployer 3.1 announcement was a statement of support for using images created by the Image Construction and Composition Tool as a component of your virtual system patterns. This is a very important enhancement as it allows you to extend the set of content deployed by IBM Workload Deployer while being sure that you are operating within the boundaries of intended use.
Can I use IBM Workload Deployer to provision to public clouds? No... and yes. If you install an IBM Workload Deployer appliance in your datacenter, you cannot use it to deploy to a public cloud environment. However, you may have recently heard about the IBM SmartCloud Application Services portfolio. IBM has announced that the pattern-based provisioning that one gets with IBM Workload Deployer will also be available as part of this portfolio. This means that you will be able to build and deploy patterns using a service hosted on the IBM SmartCloud. Further, your deployed systems will run on the IBM SmartCloud. Check out this demo for more information.
** IBM Workload Deployer 3.1 firmware is available on 11/18.
A couple of weeks ago, I dropped by the Intel Developer Forum to present a session and listen in on a few others. As always in these types of shows, I learned quite a bit. Most strikingly though, I was reminded of something that is probably quite obvious to many of you: Consumer interest in cloud computing will not be letting up any time soon.
Based on this, and some of the other things I heard at the show, I decided to catch up with fellow IBMer Marc Haberkorn. Marc is an IBM Product Manager and is responsible for IBM Workload Deployer amongst other things. I asked him about IBM Workload Deployer, the competition, and cloud in general. Check out what Marc had to say below:
Me:IBM Workload Deployer is one among many of a growing wave of cloud management solutions. How do you differentiate the focus and business value of it versus the myriad of other solutions out there?
Marc: To sum it up, we offer a combination of depth and breadth. IWD delivers both workload aware management and general purpose management. Workload aware management differentiates IWD from its competition, as it can deliver more value for the set of products for which it has context. There is a set of actions that workload aware management tools can do that is normally left to the user by general purpose management tools. This list includes configuring a middleware server to know its hostname/IP address, configuring multiple middleware servers to know of one another, arranging clusters, applying maintenance, and handling elasticity. By handling more of these activities in the automated flow, there are fewer chances for manual errors and inconsistencies to enter a managed environment.
That said, without infinite resource or time, it’s impossible to deliver this context-aware management for everything under the sun. As such, in order to allow IWD to deliver differentiated value AND allow it to handle a customer's entire environment, we offer a mix of workload-aware management and general purpose management.
Me:VMware is a good example of a company active in the cloud space, and they seem to keep a consistent pace of new product delivery. What do you think of their product development focus?
Marc: I think VMware has built a very compelling set of capability in the virtualization space. I think the main difference between VMware's suite and IBM Workload Deployer is the perspective from which the environments are managed. VMware puts the administrator in the position of thinking about infrastructure from the ground up. The administrator is thinking about virtual images, hypervisors, and scripts. In IBM Workload Deployer, we think about things from the perspective of the app, because that's ultimately what the business cares about. By providing a declarative model through which an application can be instantiated and managed, we feel we deliver a deeper value proposition to clients, through workload-aware management.
Me:The 'one tool to do it all' approach is a popular, if not hard to achieve goal. What is your advice to users when it comes to choosing between breadth and depth for cloud management solutions?
Marc: The advantages of a "one tool to do it all" are many: less integration, more uniformity, less complexity. As such, customers will always prefer a single tool when possible. This is why IBM Workload Deployer has focused on not only providing differentiated, deeper value for common use cases but also providing a way to handle the "everything else." As such, my advice to users is not to choose between breadth and depth - use IBM Workload Deployer which offers both.
Me:To close, I'm curious to know where you think we are heading in the cloud market. What do you think users will be most readily adopting over the next one to two years? Where does the cloud industry need the most innovation?
Marc: I think most users are currently looking at the broad picture of cloud computing, and have been adopting primarily in the private cloud realm. There are several reasons for this. One reason is that many customers have a large set of hardware resources which amount to sunk cost that needs to be leveraged. Another reason is around data security concerns in off-premises clouds, and still another reason is around the human factor of comfort, which has taken time to develop around off-premise cloud models. However, businesses have become increasingly comfortable with various sources of outsourcing in recent years, especially in mission critical areas involving very sensitive data. Just look at IBM's Strategic Outsourcing business, which handles entire IT operations for many large businesses. I think that trend will (and really, has already begun to) continue in the area of cloud computing, and will lead to more public and ultimately hybrid cloud computing adoption. In order to get to hybrid cloud computing, I see much of the focus and innovation being associated with data security, workload portability (across private and public, in a seamless fashion), and license transferability between private and public. When this space reaches fruition, clients will be able to enjoy true elastic economics in a computing model that allows a mixture of owning and renting compute resources and software licenses.
Customization capabilities have been very important to the design of IBM Workload Deployer going back to the beginning with WebSphere CloudBurst. Having the ability to quickly spin up environments in a cloud really does little good if those environments are not customized according to your needs. If you look at the virtual system pattern capability, it is why we always had the notion of custom images, custom patterns, and custom scripts. We give you a strong foundation, and you tweak it here and there to create what you want.
Customization is not a concept unique to virtual system patterns. The virtual application model in IBM Workload Deployer supports many different mechanisms for you to tailor your cloud-based environments. You can start with the virtual application pattern types that we ship and use any components in those patterns to build a custom environment. The patterns you build can include your own configuration (within the set of configurable parameters) and include policies that you need for your environment. In looking at just the IBM Workload Deployer Pattern for Web Applications and the IBM Workload Deployer Pattern for Databases, there are quite a number of scenarios you can support with your cloud. However, what happens when you want to go a little further and color outside the lines of what we provide?
At some point you may have heard or read that the entire virtual application pattern model resides on a pluggable architecture. In effect, this means that everything about a virtual application pattern type, from the elements that show up when building a pattern to the management interface you interact with after deployment, is customizable. The fundamental unit of customization for a virtual application pattern type is a plugin. Plugins provide the know-how in terms of installing, configuring, integrating, and managing the application types supported by a given pattern. Plugins also provide metadata that control what users see as they build and manage these patterns. In short, plugins are the source of truth for virtual application patterns!
If you looked in IBM Workload Deployer, you would find the collection of plugins that support the virtual application pattern types shipped with the offering. While that is interesting, you should also know that you can supply your own plugins. That's right. You can develop a plugin, and load it directly into the appliance. This allows you to do two very important things. First, you can extend the virtual application pattern types that come with IBM Workload Deployer with any kind of functionality you deem important. This may be additional monitoring, integration with external systems, or any number of other extensions. Second, you can create new virtual application pattern types that support your desired workloads. You can support the workloads with the software of your choosing so long as you can supply the necessary know-how in your plugins. In either case, you contribute the plugin, and your customized components become first class members of the IBM Workload Deployer landscape.
Okay, so I admit that this is not necessarily news. We have supported user-contributed plugins since the release of IBM Workload Deployer. However, there is something new that significantly lowers the barrier to entry in the custom plugin game. Early last week, IBM announced the IBM Workload Plugin Development Kit. This kit provides a set of tools and samples designed to make the construction and packaging of custom plugins a simple process. In my opinion, this reiterates our commitment to an extensible, application-centric cloud approach, and it represents a huge step forward in the industry as a whole. Be sure to check this out, and don't be shy with the comments and feedback!
More and more, I am getting a question about how to bring existing WebSphere environments into IBM Workload Deployer. While "bringing in an environment" can mean any number of things, let's take it to mean that a user wants to import their existing WebSphere cells, applications, and configuration into IBM Workload Deployer as a pattern they can subsequently deploy. While there may not be a big red easy button in the appliance that lets you point to an existing environment and import it, there are a couple of techniques that one can employ. I have covered both techniques before, but since I'm getting the question with increasing frequency, I felt like it was time for recap.
The first option is to use a combination of IBM Workload Deployer and Rational Automation Framework for WebSphere. This is a use case I have spoken about numerous times at conferences and in blog posts and articles. In fact, you can read a little about it here. In this sense, RAFW provides excellent capabilities to point at an existing cell, and import everything about it. This includes WebSphere configuration, applications, shared libraries, and more. Once imported as a RAFW project, you can use the IBM Workload Deployer integration script package provided by RAFW to replay that configuration on top of deployments created by the appliance.
The second option is something I talk about a little less frequently. This option revolves around the use of a sample script (provided for free in our samples gallery) that you can run against existing WebSphere cells. The invocation of this script produces IBM Workload Deployer script packages that you can use in patterns to apply the configuration of the target cell to your new cloud-based deployments. Under the covers the utility script and resultant script packages use backupConfig and restoreConfig respectively. They do ensure the update of the cell, node, and host names during the restoreConfig execution (which happens automatically during pattern deployment). Beyond that, the use of the script is subject to the same limitations and rules in place for the use of the backupConfig and restoreConfig commands. You can read more about this capability, watch it in action, and download it for free.
I hope this is all useful information for those of you looking for ways to import existing environments into IBM Workload Deployer as patterns. If you have any questions, please let me know!
One of the fundamental tenants of IBM Workload Deployer is a choice of cloud deployment models. Starting in v3.0, users will be able to deploy to the cloud using virtual appliances (OVA files), virtual system patterns, or virtual application patterns. The ability to provision plain virtual appliances is a way to rapidly bring your own images, as they currently exist, into the provisioning realm of the appliance. As such, I think the use cases and basis for deciding to use this deployment model are fairly evident. However, when comparing the two patterns-based approaches, virtual system patterns and virtual application patterns, the decision requires a bit more scrutiny.
Our pattern approach is a good thing for you, the user. Basically, when we refer to patterns in the context of cloud, we are referring to the encapsulation of installation, configuration, and integration activities that make deploying and managing environments in a cloud much easier. Regardless of what kind of pattern you end up using, you benefit from treating a potentially complex middleware infrastructure environment or middleware application as a single atomic unit throughout its lifecycle (creation, deployment, and management). In turn, you benefit from decreased costs (administrative and operational) and increased agility via rapid, meaningful deployments of your environments. That said, it is imperative to understand the differences between virtual system and virtual application patterns, and more importantly, it is important to understand what those differences mean to you. Let's start by considering the admittedly simple 'Cloud Tradeoff' continuum below.
In the above graph, the X-axis represents the degree to which you have customization control over the resultant environment. The degree of control gets lower as we move from left to right. The left Y-axis represents total cost of ownership (TCO), which decreases as we move up the axis. The right Y-axis represents time to value, which similarly decreases as we go up the axis. Naturally, enterprises want to move up the Y-axis, but, and it can be quite a big but, they are sometimes hesitant to relinquish much control (move to the right on the X-axis) in order to do so. In that light, I think it helps to explore our two patterns-based approaches a bit more.
The most important thing to understand about this continuum is that the X-axis really represents the customization control ability from the point of view of the deployer and consumer of the environment. An example is probably the best way to explain. Let's consider a fairly simple web service application that we want to deploy to the cloud. If we were to use a virtual system pattern to achieve this, we would probably start by using parts from the WebSphere Application Server Hypervisor Edition image to layout our topology. We may have a deployment manager, two custom nodes, and a web server. After establishing the topology, we would add custom script packages to install the web service application and then configure any resources the application depended on. Users that wanted to deploy the virtual system pattern would access it, provide configuration details such as the WAS cell name, node names, virtual resource allocation, and custom script parameters, and then deploy. Once deployed, users could access the environment and middleware infrastructure as they always have. That means they could run administrative scripts, access the administrative console provided by the deployed middleware software, and any other thing one would normally do. The difference in using virtual system patterns is not necessarily the operational model for deployed environments (though IBM Workload Deployer makes some things, like patching environments, much easier). Instead, the difference is primarily in the delivery model for these environments.
Using a virtual application pattern to support the same web service application results in a markedly different experience from both a deployment and management standpoint. In using this approach, a user would start by selecting a suitable virtual application pattern based on the application type. This may be one shipped by IBM, such as the IBM Workload Deployer Pattern for Web Applications, or it may be one created by the user through the extensibility mechanisms built into the appliance. After selecting the appropriate pattern, a user would supply the web service application, define functional and non-functional requirements for the application via policies, and then deploy. The virtual application pattern and IBM Workload Deployer provide the knowledge necessary to install, configure, and integrate the middleware infrastructure and the application itself. Once deployed, a user manages the resultant application environment through a radically simplified lens provided by IBM Workload Deployer. It provides monitoring and ongoing management of the environment in a context appropriate for the application. This means that there are typically no administrative consoles (as in the case of the virtual application pattern IBM ships), and users can only alter well-defined facets of the environment. It is a substantial shift in the mindset of deploying and managing middleware applications.
Okay, with that explanation in the bag, let's revisit the diagram I inserted above. I hope it's clear that, all things being equal, virtual application patterns indeed provide the lowest TCO and shortest TTV because of the degree to which they encapsulate the steps involved in setting up complex middleware application environments. So, let's get back to my assertion that the customization control continuum really applies to the deployer and consumer. Why do I say that? It's simple. In the case of either the virtual system pattern or the virtual application pattern, the pattern composer has quite a bit of liberty in how they construct things. Sure, we enable you right out of the chute by shipping pre-built, pre-configured IBM Hypervisor Edition images, as well as pre-built virtual system and virtual application patterns. The key is though, that the IBM Workload Deployer's design and architecture also enables you to build your own patterns -- be they the virtual system or virtual application type. With anywhere from a little to a lot of work, you can build virtual system and virtual application patterns tailored to your use cases and needs.
At this point, you may be saying, "Well now you have really confused things! How am I supposed to decide what kind of patterns-based approach fits my needs?" I have some advice in that regard. First, map your needs to things that we enable with the assets you get right out of the box with IBM Workload Deployer. If your application fits into the functional scope of one of the virtual application patterns that we ship, use it. If you can support the application by using IBM Hypervisor Edition images, virtual system patterns, and custom scripts, do it. In this way, you benefit most from the value offered by IBM Workload Deployer. However, if you find that you cannot use any of the assets we provide right out of the box (e.g. you want to deploy your environment on software not offered in IBM Hypervisor Edition form or in a virtual application pattern), then ask yourself one simple question: "What do I want my user's experience to be?"
In this sense, I primarily mean a user to be a deployer or consumer of your patterns. You need to decide whether you favor the middleware infrastructure centric approach afforded by virtual system patterns, or if you prefer the application centric approach proffered by virtual application patterns. There is no way to answer this generically for all potential IBM Workload Deployer users. Instead, you have to look at your use case, understand what's available to help you accomplish that use case, and finally, decide on what you want your user's experience to be. I hope this helps!
Application-centric cloud computing is the main thrust behind the new capabilities of IBM Workload Deployer v3.0. But what does that really mean? After all, application-centricity is really just a concept. Granted, it is an important concept, but it is fairly meaningless until it is put into action or implemented. IBM Workload Deployer does just that with its new Virtual Application Patterns (VAPs).
VAPs are the embodiment of the workload pattern approach I briefly discussed in an overview post a few weeks back. The idea with a VAP is to give the user an interface through which they can provide their application, specify dependencies, declare functional and non-functional requirements and then deploy. Of course application middleware is a part of the overall solution, but IBM Workload Deployer has the smarts to build, configure, and integrate the necessary infrastructure in order to support the user's application. This is completely hidden from the user, so they are liberated to focus on the application and its requirements.
If we scratch a bit further beneath the surface of a VAP, we see that these patterns contain three primary pieces. These primary pieces are components, links, and policies, and they are fundamental to understanding how virtual application patterns work. Let's start with the building blocks of VAPs, components. Put simply, components represent different resources and functionality profiles that make up your application environment. As an example, the IBM Workload Deployer Pattern for Web Applications is a VAP that contains components for an EAR file, WAR file, message queue, and any number of other components that are typical requirements for a web application. The components will certainly vary based on the workload type (i.e. the components included in a web application VAP would be different than those included in a batch application VAP), but they are the foundation of any VAP.
From the ground up, the next logical element we come to in the VAP is a link. A link is a way to declare a dependency or integration point between two components. As an example, consider a VAP with a WAR file component and a database component. You might draw a link between the WAR component and the database component to indicate that your web application uses or otherwise depends on the database. IBM Workload Deployer interprets this link, and takes it as a directive to configure the integration between the two components as a part of deployment. In this case, that may mean configuring a data source in the application's container. This is just a simple example, and an application may have any number of links between components.
Finally, we come to the policy element within the VAP. A policy is a way for a user to specify functional and non-functional requirements for their application environment. Users attach policies to the VAP, or to components in their VAP, and IBM Workload Deployer interprets and enforces those policies. In the context of a web application, one example of a policy could be a scaling policy. The scaling policy might indicate scaling requirements for the application that included minimum application instances, maximum application instances, and conditions that triggered scaling activities. IBM Workload Deployer would use the information in a scaling policy within a VAP to appropriately manage the deployed, running environment. Other examples of a scaling policy may include a JVM policy that provides configuration directives for the java virtual machines in your application environment or a logging policy that defines logging configuration options. In any case, the policy element allows VAP builders to influence the configuration and management of the application environment.
In the example VAP below you can see the use of components (Enterprise Application, Database, User Registry, Messaging Service), links (blue lines between components), and policies (Scaling Policy, JVM Policy):
In total, when I look at a VAP a particular word sticks out to me: declarative. VAPs really enable declarative, application-centric cloud computing. What do I mean? By declarative, I mean you are telling IBM Workload Deployer what you want, but not necessarily how you want it done. It is the job of IBM Workload Deployer to take care of the how. This shift in approach to application environments enables the potential for significant savings, and more importantly to me, lays the foundation for a more agile, flexible approach to deploying and managing application environments.
There will be more in the weeks and months to come on IBM Workload Deployer, so stay tuned. I also want to put a plug in for a new blog from Jason McGee. For those that do not know Jason, he is an IBM Distinguished Engineer, and the lead architect behind IBM Workload Deployer. Be sure to check out his blog for insights on this new offering, as well as for all things cloud.
When one uses IBM Workload Deployer (previously WebSphere CloudBurst) to deploy a virtual system pattern, they benefit from a completely automated deployment process. The automation includes the creation and placement of virtual machines, injection of IP addresses, initiation of internal processes, and invocation of included scripts. Most of these processes are straightforward and require little more than a brief overview. However, the placement of virtual machines stands out, and it's inner workings are the subject of quite a few questions when I discuss the appliance. With that in mind, I thought I would provide a little more information on how the placement algorithm in IBM Workload Deployer works.
The placement subsystem in IBM Workload Deployer considers three primary elements: compute resource, availability, and license optimization. Compute resource availability is the gating factor for placement. That means that IBM Workload Deployer first looks at the available CPU, memory, and storage resource in the collection of hypervisors making up the cloud group(s) you are targeting for deployment. If a particular hypervisor cannot provide enough resource based on the amount you requested for your deployment, then it is automatically taken out of the eligible hosts pool. It is important to note that IBM Workload Deployer will overcommit CPU, and it will overcommit storage if you direct it to do so. It will not overcommit memory because that could severely degrade the performance of the application(s) running in the virtual machines.
After choosing the pool of hypervisors that are capable of hosting the virtual machines in your deployment from a compute resource perspective, the appliance then considers high availability. To better understand this particular placement stage, let's consider an example. Consider you are deploying a pattern based on WebSphere Application Server Hypervisor Edition and it contains two custom node parts. It is conceivable, and in fact likely, that these two custom node parts will host members of the same cluster, and thus the two nodes will support the same applications. As such, IBM Workload Deployer will attempt to place the two custom nodes on different physical machines in order to prevent a single point of failure. Of course, this depends on having two hypervisors with enough resource (CPU, memory, storage) to host the virtual machines, but the appliance makes that decision in the first placement stage.
After considering compute resource and high availability, IBM Workload Deployer moves to the last stage of placement: license optimization. In this stage, the placement subsystem attempts to place the virtual machines on hypervisors in a way that minimizes the licensing cost to you. The appliance can do this because it is aware of IBM virtualization licensing rules and takes those into account during this stage (if you aren't familiar with virtualization licensing rules and you are curious, ask you're sales representative to explain some time). During this stage, it will not violate any resource overcommit directives or rules in place, nor will it compromise system availability, but it will seek to minimize costs within these parameters.
At this point, I should make something clear that may already have occurred to you. You can override most of these placement rules by creating a cloud group containing only one hypervisor. In this case, IBM Workload Deployer will put all virtual machines on the single hypervisor until it runs out of compute resource (memory is likely to be the constraining factor). I would not suggest that you do this unless you have a good reason or you are in a simple pilot phase, but I do like to point out the art of the possible!
While not incredibly deep from a technical perspective, I do hope that this provided a few helpful details on what goes on during the placement stages of deployment. If you have any questions, do let me know.
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
I hardly ever have a conversation about WebSphere CloudBurst, or generally cloud computing for application middleware, without the topic of databases coming up. Databases are such an important piece of nearly every application middleware environment, so users want to be sure that whatever they do for their application servers, they can also do for the databases on which their applications rely. That is why the capability to deploy DB2 from WebSphere CloudBurst has been around for as nearly as long as the capability to deploy WebSphere Application Server.
Even though DB2 deployment capability has been around for a while, there are still some common misconceptions regarding the offering. First, I have talked to a fair number of users who are under the impression that we only offer a trial version of DB2 for deployment via WebSphere CloudBurst. While that was true for the first few months of the offering, that is no longer the case. For several months now, a fully supported, 64 bit, production-ready DB2 image has been ready for use in WebSphere CloudBurst. If you were waiting for a DB2 image that you could go live with, wait no longer!
The other misconception, or rather, point of confusion, arises from the fact that the DB2 image for WebSphere CloudBurst is not, by name, a Hypervisor Edition image. I can assure you that is in name only. The DB2 image looks like and behaves like any other IBM Hypervisor Edition image once you load it into the appliance. You can use it to build and deploy patterns in the same way you use other images in WebSphere CloudBurst. You may just have trouble finding it if you search for 'DB2 Hypervisor Edition' as opposed to 'DB2 Server for WebSphere CloudBurst Appliance.'
Instead of going into further detail, I want to refer you to a blog entry from a fellow IBMer, Leon Katsnelson. Leon is a program director for DB2 and is responsible for the team that develops and delivers the DB2 image for WebSphere CloudBurst. In his most recent post, he provides a nice overview of the image and gives good information for those looking to use DB2 and WebSphere CloudBurst (there is also a bit on cloud computing at the beginning that I think is spot on). Check out Leon's post, and let us know what you think!
In last week's post, I put the spotlight on various aspects of bundles in the Image Construction and Composition Tool. I finished with a look at a WebSphere CloudBurst virtual image created from the bundle. However, you do not just magically go from a bundle to an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. Today, I want to show you how to go from a bundle to a custom virtual image using the IBM Image Construction and Composition Tool.
Once you have defined at least one bundle and one base operating system image, you are ready to compose a custom image. We already talked about creating a bundle, but the base operating system image is a new topic. You can do this by either starting from ISO and kickstart configuration files, or you can import an existing Open Virtual Appliance (OVA) image that contains your operating system of choice. Once you have that base image imported or defined in the Image Construction and Composition Tool, you can extend it to create a custom image on top of the base OS image.
After creating your extended image, you can add bundles that represent the software you want to install in your custom image. Simply click on the Software tab of the new virtual image. Click the add icon, and select the bundle that you want to add. You can add as many bundles as you would like to your custom image.
After adding a bundle, it will show up in the Planned list of software for the image. Click on it to display its details in the right side of the screen. You will notice General, Install, and Configuration sections for the bundle. In the Install section, you will find a list of the installation parameters you defined for the bundle. You can provide values for the parameters at this time.
If you click on the Configure section, you will see all of the configuration paramters you specified for the bundle. You can provide default values, and you can specify whether or not these should be configurable by deployers of your custom image. If you mark them as configurable, users will be able to provide values for the parameters at image deploy time, regardless of whether they provision the image using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
After you add the necessary bundles and specify installation and configuration data, you can save the image. Upon saving, the image status changes from Synchronized to Out of Sync.
Now you are ready to synchronize the image. To do this, simply click the synchronize icon. This will result in the creation of a virtual machine in the cloud envrionment (VMware or IBM Cloud) you defined in the selected cloud provider. The Image Construction and Composition Tool will then invoke the appropriate installation tasks (per the bundles you included in the image) within the running virtual machine. It will also copy over any configuration scripts you defined in the bundle.
After a while, the synchronization process completes, and the image returns to the Synchronized state. At this point, you are ready to capture the image by clicking the capture icon. This results in the creation of an OVA virtual image with your customizations. When the capture process completes, the image status changes to Deployable.
Once the image is in the deployable state, it is nearly ready to use. If you are using the IBM Cloud as your cloud provider, you can simply mark the image complete by clicking the complete icon. At this point, the image will show up in your private catalog on the IBM Cloud and it is ready to use. If you are using VMware as the cloud provider, you need to export the image. Click the export icon and provide information about an SCP-enabled server to which you want to export the image. Ideally, this location is directly reachable by the WebSphere CloudBurst or Tivoli Provisioning Manager environment into which you will import the image.
You can monitor the export status in a separate window by clicking on a link shown after clicking the OK button in the dialog above. When the export finishes, you are ready to import your new custom virtual image into WebSphere CloudBurst or Tivoli Provisioning Manager.
I hope the last three posts have given you a better idea of what the new IBM Image Construction and Composition Tool is all about. There will definitely be more to come about this tool in the near future, but in the meantime, if you have any questions or comments, please reach out to me. Until then, good luck and full speed ahead on your custom image compositions!
Since bundles are such a core component of the IBM Image Construction and Composition Tool, I thought it would help to take a closer, more thorough look at them than I did in my post last week (if you have not already, I suggest reading the overview post before continuing). To help us in our closer examination, we will consider an example bundle I built using the IBM Image Construction and Composition Tool. The example bundle I built encapsulates the logic to install and configure WebSphere Application Server Community Edition. Let's take this step by step.
The first part of the bundle is the General section. This section allows you to provide a name and description for the bundle, the bundle ID and version, and the products represented by the bundle.
The next section of a bundle is the Requirements section. In this section, you can define the operating system and software requirements for your bundle. In the OS section, you specify the type, distribution, and version level of the OS your bundle requires. In the software section, you can indicate that your bundle requires other bundles defined in the IBM Image Construction and Composition Tool. You do this by providing the bundle ID for required bundles.
Next, we move on to the Install section of the bundle. Two major subsections make up this section. The first subsection is the Files to Copy section. Here, you provide files, via a file upload dialog or by providing a URI, and you specify a destination directory. When you add a bundle to an image and initiate the synchronization process, the IBM Image Construction and Composition Tool will automatically copy the files you list here to the specified destination directory on the virtual machine. In the sample WebSphere Application Server Community Edition bundle, I specify a single install.sh file to copy to the virtual machine.
The second major subsection of the Install section is the Command subsection. In this section, you will specify the installation command that the IBM Image Construction and Composition Tool should automatically invoke during the synchronization process. Additionally, you can define variables that you want to make available to your installation scripts. The tool makes these available as environment variables for the process within which your script runs. In the sample bundle, I tell the Image Construction and Composition Tool to invoke the install.sh script specified above, and I define parameters that specify the location of the binaries to install, the location to install the binaries on disk, and more.
The next section in a bundle is the Configuration section. The configuration section allows you to define configuration operations that provide actions that execute for each deployment of an image containing the bundle. You can define 0 to N configuration operations in a bundle, and each configuration operation definition contains three major subsections. The first is the Files to Copy subsection. This subsection is similar to the Files to Copy subsection in the Install section. You provide files or file URIs and you provide a destination directory to which the tool will copy the file. The WebSphere Application Server Community Edition bundle contains a single configuration operation called ConfigWASCE. In the Files to Copy section, I define a single file to copy into the image's activation engine directory.
The second major subsection in the configuration operation definition is the Command subsection. Like the Command subsection in the Install section of the bundle, you specify a command to execute and optionally associate variables with the command. There is a key difference between the command definition for configuration operations as opposed to installation operations. The Image Construction and Composition Tool invokes the command you specify for installation operations exactly ONCE at image creation (synchronization) time. On the other hand, commands you specify in the configuration operation definition execute EACH time someone deploys an image containing your bundle. In the sample bundle, my ConfigWASCE.sh script will automatically execute for each deployment. The tool will package the image in such a way that ensures the automatic passing of parameters defined in the Arguments list (including num_servers, WASCE_HOME, and more) to the ConfigWASCE.sh script.
The final major subsection of a configuration operation definition is the Dependencies section. This allows you to define other services on which your configuration operation is dependent. This can include other configuration operations in the same or other bundles, and it can include general operating system services. The WebSphere Application Server Community Edition sample bundle includes a few dependencies.
The Install and Configuration sections are really the meat of your bundle, but there is more. There is a Firewall section that allows you to define port ranges and associated protocols that the IBM Image Construction and Composition Tool should ensure are open when provisioning an image containing your bundle. Currently, the tool supports firewall configuration data when building images for the IBM Cloud. The Reset section of the bundle allows you to define tasks that should execute when capturing the image back into the Image Construction and Composition Tool (after synchronziation completes). This allows you to clean up the state of the image after the install completes. Reset configuration is not currently available in the alphaWorks version of the tool. Finally, there is a License section where you can define software licenses associated with your bundle. The tool automatically adds these licenes to the constructed image's metadata, thereby allowing deployment tools to prompt the user to accept all pertinent licenses. The WebSphere Application Server Community Edition sample bundle defines a product license.
Of course, once the bundle definition is complete, you can leverage it to compose and produce an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. In the case of the WebSphere Application Server Community Edition sample bundle, I used it to create an image that I loaded into WebSphere CloudBurst and used to build patterns.
I hope this helps to provide a better idea of what bundles are all about in the Image Construction and Composition Tool. Don't forget to take a look at the overview demo and stay tuned for more to come about this new tool!
When I talk with WebSphere CloudBurst users, the topic of custom virtual images comes up frequently. In some cases they simply want to customize a shipped IBM Hypervisor Edition, and in other cases they want to create a completely custom image. Creating a customized version of an IBM Hypervisor Edition is relatively easy since we give you extend & capture in WebSphere CloudBurst. Creating a completely custom image has historically been a bit tougher, mostly owing ot the fact that there was not a standard tool or process for image assembly. I am happy to say that today's publication of the IBM Image Construction and Composition Tool changes all that.
Watch a demo of the IBM Image Construction and Composition Tool
The primary purpose of the Image Construction and Composition Tool is to enable a modular approach to virtual image construction, while taking into account the typical division of responsibilities within an organization. The tool allows the right people within an organization to contribute their specialized knowledge as appropriate to the virtual image creation process. This means OS teams can handle the OS and software teams can handle the appropriate software. A separate image builder can then use both OS and software components to meet the needs of users within the organization. Best of all, the image builder does not need intimate knowledge of how to install or configure any of the components in the image. They simply need to know which OS and software components to use.
When using the Image Construction and Composition Tool, you start by defining the base operating system you wish to use for your images. You can do this by importing an existing virtual image with an OS already installed, providing an ISO for the OS, or pointing to a base OS image on the IBM Cloud. The bottom line is that you have necessary flexibility to start with your certified or ‘golden’ operating system build. Once you have the base OS image defined in the Image Construction and Composition Tool, you can start defining custom software for use in the images you will compose.
In the tool, bundles represent the software you wish to install within a virtual image. The definition of a bundle contains two major parts: Installation and Configuration. The installation component of a bundle tells the Image Construction and Composition Tool how to install your software into the virtual image. You provide a script or set of scripts that install the necessary components into your image, and you direct the tool to call these scripts. These tasks run once during the initial creation of the virtual image, thus allowing you to capture large binaries, long-running installation tasks, or other necessary actions directly into your image.
The configuration section of a bundle defines actions that configure the software installed into the image. Like with the installation tasks, you provide a script or set of scripts for configuration tasks. Unlike installation tasks that run exactly once, configuration scripts become part of the image’s activation framework and as such, run during each image deployment. Using the tool, you can define input parameters for configuration scripts and optionally expose them so that users can provide values for the parameters at image deploy-time. Configuration tasks are important in providing flexibility that allows users to leverage a single virtual image for a number of different deployment scenarios.
Once you have your base OS image and one or more bundles defined in the Image Construction and Composition Tool, you can compose a virtual image. To compose a virtual image, you extend the base OS image and add any number of bundles into the new image. A base OS image plus a set of bundles defines a unique image.
After you define the image you want to construct, you initiate a synchronize action in the Image Construction and Composition Tool. When you start the synchronize action, the tool first creates a virtual machine in either a VMware or IBM Cloud environment (based on how you configured the tool). Next, the installation tasks of each bundle you included in the virtual image run to install the required software. Finally, the tool copies the configuration scripts from each bundle into the virtual machine and adds them to the image’s activation framework. This ensures the automatic invocation of all configuration scripts during subsequent image deployments.
Once the image is in the synchronized state, you can capture it. Capturing the image results in the creation of a virtual image based on the state of the synchronized virtual machine. The tool also automates the generation of metadata that becomes part of the virtual image package. When the capture of the virtual image completes, you can export it from the Image Construction and Composition Tool and deploy it using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
I am excited for users to get their hands on the Image Construction and Composition Tool. I believe it represents the first big step in helping users to design and construct more sustainable virtual images. Did I mention it is completely free to download and use? Visit the Image Construction and Composition Tool website for more details and a download link. I look forward to your comments and feedback.
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
One of my favorite books from childhood is If You Give a Mouse a Cookie. Although targeted at children, the book illustrates a frequently occurring human behavior that is important for all of us understand. That behavior is the tendency for escalating expectations. The book offers this up by starting out with the simple action of giving a mouse a cookie. The mouse in turn asks for a glass of milk, various flavors of cookies, and on and on, until the mouse circles back to asking for another cookie.
Nearly all of us exhibit this same kind of behavior, and it can often produce positive results. In particular, in IT we always push for the next best thing or a slightly better outcome. Personally, I am no stranger to this behavior because I experience it from WebSphere CloudBurst users quite frequently. In these cases, it usually revolves around one particular outcome: speed of deployment.
Bar none, users of WebSphere CloudBurst are experiencing unprecedented deployment times for the environments they dispense through the appliance. The fact that we say you can deploy meaningful enterprise application environments in a matter of minutes is far beyond just marketing literature. Our users prove it everyday. However, just because they are deploying things faster than ever does not mean they are content to rest on those achievements. They want to push the envelope, and I love it.
For our users looking to achieve even speedier deployment times, I offer up one reminder and one tip. First, analyze all of your script packages to ensure you are using the right means of customization. If you have some scripts that run for considerably longer than most other script packages, you may want to at least consider applying that customization by creating a custom image. You still need to adhere to the customization principles outlined here, but you may benefit from applying the customization in an image once and avoiding the penalty for applying it during every deployment. You may also be able to break this customization out with a combination of a custom image and script packages. For instance, instead of having a script that installs and configures monitoring agents, you may install the agents in a custom image and configure them during deployment. Being selective about how and when you apply customizations can go a long way in improving your deployment times.
In addition to the reminder above, I also have a tip. Take a look at all of the script packages you use in pattern deployments and look to see if there are any that you can apply in an asynchronous manner. In other words, identify customizations that need to start, but not necessarily complete as part of the deployment process. Going back to our example of configuring monitoring agents during the deployment process, it may be important to kick off the configuration script during deployment, but is it crucial to wait on the results? Maybe not. If it is not, consider defining the executable argument in your script package in a manner that kicks off the execution and proceeds -- i.e. nohup executable command &. This approach can save deployment time in certain situations.
My advice to users of WebSphere CloudBurst: keep pushing your deployment process! Pare as many minutes off the process as you can. I hope that the tips above help in that regard, and be sure to pass along other techniques that you have found helpful.
Maybe you remember, but not long ago I wrote a post about scenarios when WebSphere CloudBurst and Rational Automation Framework for WebSphere (RAFW) combine to form quite the pair. You can read that post for details, but the basic scenarios were configuring and capturing, importing existing environments into WebSphere CloudBurst, and migrating from virtual to physical installations. Well, after talking with customers and colleagues lately, you can add another scenario to the list: version-to-version WebSphere Application Server migrations.
I want to be clear here about one thing before I go further. I am in no way advocating against the use of the migration tooling that ships with WebSphere Application Server. It is an excellent tool that can make migrations simple and fast. I am merely pointing out that when it comes to version-to-version migrations you have options, and you should survey them all before making a decision.
With that understanding, let's take a look at WebSphere CloudBurst and RAFW in the context of a version-to-version migration. This integrated approach to migration is ideal if you are amenable to moving up to a newer version of WebSphere Application Server in a cloud-based environment. Using both products makes migrations fast and easy, and you can be very confident that the configuration of the migrated environment is faithful to the original. The figure below shows the basic flow of the migration and breaks it down into a set of discrete steps.
Now, for a quick break down of each step:
Extract config & apps from old environment: The first step involves pointing RAFW at your existing configuration, the one you want to migrate from, and using an out-of-the-box action to import all of the configuration into a RAFW environment. You can also import your application binaries in this step.
Store config & apps from old environment: In step two, you will store the extracted configuration and application binaries in a source control repository or some backup location separate from your RAFW server. This is an optional, but recommended step.
Analyze and update apps: Before migrating your applications to the newer version of WebSphere Application Server, you can use the completely free Application Migration Toolkit to analyze the source code of your applications. This toolkit will recommend any required updates to ensure your application continues to behave as expected when moving to the new version. Again, this is an optional step, but the toolkit is free and very handy. So, why not?
Deploy new version of the environment: Step four starts by building a new WebSphere CloudBurst pattern. This new pattern matches the topology of the environment you are migrating from, and you build it from an image containing the version of WebSphere Application Server to which you want to migrate. Once built, you deploy it to your private cloud and you have a running environment in minutes.
Apply stored config and deploy updated apps: Now that you have your new environment up and running, use RAFW to apply the configuration you extracted from your old environment. RAFW inherently understands any configuration translation that needs to occur to apply the old configuration to your new environment, and it can also deploy your updated applications for you.
That's the basic overview for version-to-version migrations when you are moving to a cloud-based environment. In time, I will be posting more information about this process to shed a little more light about what is going on under the covers. In the meantime, you know how to reach me if you have questions!
The majority of my posts on this blog address using various features of WebSphere CloudBurst to build private cloud computing environments. Today though, I want to switch gears and instead of talking private cloud, let's talk public cloud. Specifically, let's take a look at the capabilities and services delivered via the IBM Smart Business Development and Test on the IBM Cloud (hereafter referred to as the IBM Cloud).
For some of you, the fact that IBM has a public cloud offering may be a little surprising. After all, if you listen to some uninformed critics you may hear that IBM only cares about private clouds for large enterprises. That is simply untrue. The IBM Cloud is an Infrastructure as a Service public cloud that delivers rapid access to services hosted on IBM infrastructure via a self-service web portal. The IBM Cloud offers multiple payment options, including usage-based billing and reserved capacity billing, and even features a cost estimator so you can confidently establish a monthly budget for your usage.
Regardless of whether you use a private or a public cloud, security should always be a chief concern. As such, IBM takes security very seriously in the IBM Public Cloud. The infrastructure that constitutes the cloud is subject to internal IBM security policies that include regular security scans and tight administrative governance. Your data and virtual machines stay in the data center to which you provisioned them, and physical security policies match those of internal IBM data centers. Additionally, you can optionally make use of the virtual private network option to isolate access to the virtual machines that you provision on the IBM Cloud. Rest assured that security in the IBM Cloud was a guiding design principle and not an afterthought.
With the basics out of the way, let's get on to the question I'm sure you have: What can I run on the IBM Cloud? To get you started, the IBM Cloud provides a nice list of public images in its catalog that are ready for you to provision. These images include WebSphere Application Server, WebSphere sMash, DB2, WebSphere Portal Server, IBM Cognos Business Intelligence, Tivoli Monitoring, Rational Build Forge, and many more. In addition to the public images provided by the IBM Cloud, you can build your own private images. Private images allow you to start with a base public image and then customize it by adjusting the configuration or installing new software. Once customized, you can store these private images on the IBM Cloud and provision them whenever needed. Whether you are using public or private images, you have a number of server configurations to choose from in order to host your environments.
While very brief, I hope this overview provides you with some of the more important details regarding the IBM Cloud. There are few, if any, service providers out there with the enterprise expertise of IBM, and I think you see that reflected in the IBM Cloud. If you are looking at public cloud options for your enterprise application environments, you should definitely take a closer look at the IBM Cloud.
I spent most of my time growing up doing two things, going to school and playing sports. I made many fond memories -- mostly from the latter :) -- and learned more than a few lessons over that time. Of all of those lessons, there was one in particular that stuck out in both the classroom and on the baseball diamond: Sometimes you have to get back to the basics.
In that vein, I think it is time to revisit the basics of WebSphere CloudBurst. In revisiting the basics, I am not talking about the technical basics of the appliance. Rather, I am talking about revisiting exactly why WebSphere CloudBurst exists in the first place. In other words, let's take a look at the problem domains WebSphere CloudBurst addresses, and let's discuss a little bit about how the appliance does so.
Virtual image parts play a huge role in WebSphere CloudBurst. When crafting your own customized patterns, you include anywhere from 1 to n parts from as many different virtual images as is necessary. These parts represent the different node types or personalities within a given Hypervisor Edition image, and form the basis of your pattern. When you deploy a pattern, such as the one pictured below, WebSphere CloudBurst creates a distinct virtual machine for each part.
This means that after deploying the above WebSphere Application Server pattern, you will have four virtual machines comprising your virtual system. This gives you a clean separation of concern by providing a unique container for each of your application environment nodes. This can attribute to performance optimization, increased availability, and much more. However, this approach is not suitable to all use cases. In some scenarios, especially when trying to control costs and increase consolidation, you may want to deploy a multi-node WebSphere Application Server environment within a single virtual machine. Based on what I showed you above, you might think our approach in WebSphere CloudBurst makes this impossible, but you would be overlooking an important component of patterns.
That component is of course the second building block of patterns... script packages. As you probably know, script packages allow you to supply just about any customization you want. In the case that you want a single virtual machine to host a number of WebSphere Application Server nodes, maybe even an entire cell, all you need to do is supply a script package that constructs the necessary nodes during deployment. In fact, you don't even have to write the script package. You can use the free sample in our samples gallery. As seen in the pattern below, you include this script package on a sole deployment manager part in a pattern.
The script script package provides parameters that define the node name, number of custom nodes, and number of web server nodes you want in your cell. During the deployment process, the script takes this information and constructs the cell you define. This includes creating the custom and web servers nodes and federating the custom nodes, thus completing the creation of your WebSphere Application Server cell. In this case, the script package provides deployment flexibility that is sometimes a necessity, and it is just another example of the many degrees of flexibility enabled by the script package design.
I should point out that a part in a pattern does not always map to a single node. For instance, in the case of WebSphere Process Server, there is a part that represents a complete, multi-node golden topology encapsulated within a single virtual machine. However, if you find yourself using images that do not contain these multi-node parts, rest easy knowing script packages provide you the flexibility you need.
In my last post, I concentrated on the new enhancements to WebSphere CloudBurst 22.214.171.124. One of the major new additions was the introduction of Environment Profiles, and I promised a developerWorks article would be forthcoming. The article is now live along with a demo that showcases the capability of environment profiles.
As I mentioned in my last post, environment profiles center around giving you more customization capability during the pattern deployment process. In WebSphere CloudBurst, the pattern deployment process consists of the five main steps depicted below.
Traditionally, WebSphere CloudBurst controlled the entire deployment process, thus closing it off to the deployer. Environment profiles extend the customization reach of users to be able to effect steps 1-3 in the above diagram. Specifically, environment profiles give you the following control:
Control over the assignment of IP addresses and hostnames to pattern parts: Instead of having WebSphere CloudBurst automatically assign IP addresses, and thus hostnames, to virtual machines during deployment, you can explicitly set both values during the deployment process.
Ability to deploy single patterns to multiple cloud groups: Previously, when deploying a pattern you selected a single cloud group and WebSphere CloudBurst deployed all the parts in the pattern to machines within that cloud group. While this may be okay for many cases, other cases may require you to deploy some parts of the pattern to one group of machines while other parts map to a separate set of machines. Before environment profiles, you could accomplish this with multiple patterns. With environment profiles, you can accomplish it with a single pattern.
Ability to supply virtual machine naming standards: As part of deploying a pattern, WebSphere CloudBurst creates one to many virtual machines with distinct names. Environment profiles allow you to supply a naming standard that WebSphere CloudBurst will use when creating the machines as opposed to default naming schemes previously used.
It is important to note that the use of environment profiles is completely optional, and you can continue to use the traditional deployment process, thereby leaving WebSphere CloudBurst in control. That said, the introduction of environment profiles is a direct response to consistent user feedback we received regarding the need for more control during the deployment process. Based on my user conversations, these profiles address many of said needs in an easy to use, straightforward manner. We are, of course, eager to know what you think. As always, you can let me know right here, through email, or on Twitter (@damrhein).
In keeping with the impressive release pace, WebSphere CloudBurst 126.96.36.199 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 188.8.131.52, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 184.108.40.206 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 220.127.116.11, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 18.104.22.168, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
I write a lot about WebSphere CloudBurst script packages. Typically, I write about what they are, how to create them, and even provide some samples from time to time. I find that most of the time I'm either writing or talking about script packages from the standpoint that they allow you to automate the delivery of customizations to environments you deploy with WebSphere CloudBurst. More specifically, I usually explain how you can include these script packages in your patterns to ensure that your custom scripts execute as part of every pattern deployment. The truth is, that is not the whole story. In fact, it's only 1/3 of the story.
In WebSphere CloudBurst, when you define a script package you also define its execution mode. The execution mode can be one of three values, and it indicates the invocation time for the script. The default value is at virtual system creation, and that tells WebSphere CloudBurst to automatically invoke the script as part of the deployment process. This seems to be the most commonly used execution mode, and in the original version of WebSphere CloudBurst it was the only available mode (which probably attributes to why I only usually tell 1/3 of the story here). As you may expect, there is a wide range of usage scenarios for this class of script packages including installing applications, activating monitoring agents, registering cells with an externally managed DNS server, and much more.
If you are like me (and many humans), you enjoy and actually expect symmetry. In that regard, it probably comes as no surprise that there is a script package execution mode called at virtual system deletion. As the name indicates, this class of script packages executes as an automatic part of the virtual system deletion process. When a user tells WebSphere CloudBurst to remove a virtual system, before it shuts down the machines in the system, it will run each script package marked to execute at virtual system deletion. Typical use cases for these scripts include removing information about the cell from externally managed DNS servers, freeing up connections with external systems, and other external 'clean up' activities.
So this leaves the final execution mode for script packages, the when I initiate it mode to be precise. This class of script packages executes when explicitly triggered by a user. In the virtual machine detail section for a deployed virtual system, you can see a list of user-initiated script packages for a given machine. There is a start button by each of the user-initiated script packages that allows you to invoke the script when, and as many times as you need to. While these script packages have many different use cases, the most common use case is to deploy application updates. Users build these application update scripts, attach them to a pattern, and invoke them whenever they want to deliver an updated application into their already deployed environment.
WebSphere CloudBurst script packages are one of the main vehicles for delivering your customizations to your cloud environments. The three execution modes mentioned above allow you to determine when the right time to deliver those customizations is.
It's really hard to complain about my work week right now. As I write this blog, I'm sitting in the Congress Center in Düsseldorf, Germany looking out over the Rhine River. As an aside, in Germany it is the Rhein River, and I have a historical connection to this body of water. My surname, Amrhein, translates (loosely) to 'on the Rhein'. It does not take an expert in genealogy to conclude that I have ancestors who at one time or another lived very close to this important German waterway.
Okay, putting the family tree aside for a minute, there is a good reason that I am in Düsseldorf this week. The city, and specifically the Congress Center, is playing host to the IBM European WebSphere Technical Conference. I am here presenting sessions that include a WebSphere CloudBurst overview, a WebSphere CloudBurst hands-on lab, and an up-close look at one of our internal team's use of the appliance. I have done each of these sessions once so far, and attendance was great, audience participation high, and feedback forthcoming. I am hearing and seeing the same thing in other sessions, which is of course, ideal for us presenters.
Now, to focus in on WebSphere CloudBurst for a bit, it seems that I am hearing a recurring question this week from the mostly European audience: "Why is WebSphere CloudBurst delivered as an appliance?" I am sure that I addressed this question in a previous blog post, but I believe it bears revisiting. There are various reasons I could give for the appliance form factor, but I like to distill all of that down into three major reasons: Consumability, Performance, and Security.
From a solution consumability perspective, nothing beats the appliance approach. WebSphere CloudBurst is an integrated hardware and software solution that delivers a specific set of function. You do not have to install software, procure and maintain storage for resources on the appliance (images, patterns, scripts, etc.), and maintain software components over time. You simply drop the appliance in to your data center, perform a one-time initialization, hook it up to the network, and you are ready to start leveraging WebSphere CloudBurst to build out your private cloud. While there is definitely work to setup the cloud infrastructure that WebSphere CloudBurst deploys environments to, we can completely eliminate a significant portion of solution implementation lead time by delivering everything you need in the appliance.
The performance benefits of an appliance approach are a natural result of building an integrated hardware and software stack. Design and development teams provide optimizations in both the hardware and software based on the fact that both the hardware and software have intimate knowledge of each other's design. In other words, this is not a 'least common denominator' tuning approach. Rather, the integrated design leads to enhanced performance for the specific set of functionality provided by WebSphere CloudBurst.
Finally, appliances enable us to deliver a very hardened, secure device. We provide private key encryption of every resource stored on the appliance. That private key is unique to each appliance and cannot be modified. In addition, the physical casing is tamper-resistant. If someone removes the casing, a 'Get Smart' style kill switch puts the appliance in a dormant state. You must send the appliance to IBM so we can reset it before further use, thus providing an additional layer of physical protection on top of the encryption. These security features, plus more, like a shield that prevents anyone from executing code on the appliance, come right out of the box and require no end-user configuration activity. In this way, you can simply focus on leveraging the user security and access controls provided by WebSphere CloudBurst.
If you had any questions on the rationale behind the appliance form factor of WebSphere CloudBurst, I hope this helps. I am off for now... back to the conference and the wonderful city of Düsseldorf.
It seems like it was announcement day across IBM, and specifically in WebSphere. While the announcements were numerous and touched many different topics, I want to focus on a couple of announcements of particular interest to those of you interested in WebSphere CloudBurst and IBM Hypervisor Edition virtual images.
First, for all of our WebSphere Process Server and WebSphere Business Monitor users, there are a couple of important pieces of information in this announcement. This announcement outlines the availability of WebSphere Business Monitor Hypervisor Edition. The new image allows you to dispense WebSphere Business Monitor 7.0 environments using WebSphere CloudBurst to VMware hypervisors. In addition, the announcement outlines the expansion of the existing WebSphere Process Server Hypervisor Edition image to support the z/VM platform and the Red Hat Enterprise Linux (RHEL) operating system for VMware.
Moving beyond our BPM set of solutions, IBM also announced the availability of a WebSphere Message Broker Hypervisor Edition. This virtual image allows you to construct and deploy WebSphere Message Broker and WebSphere MQ environments using WebSphere CloudBurst. The stack includes the RHEL operating system, and it is ready to run on VMware hypervisors.
With that in mind, here's an update to the WebSphere CloudBurst supported product matrix:
* Availability subject to dates documented in referenced announcement letters
As you can see, we are continuing our effort to expand the choice you have when using WebSphere CloudBurst to create and deploy application environments to your cloud. If you are interested in using WebSphere CloudBurst for WebSphere Business Monitor, WebSphere Process Server, or WebSphere Message Broker, check out the above announcements. You will find more technical information as well as planned availability dates.
Just one last scrap of food for thought. Feedback from you, our users, is instrumental as we continue to expand software choice with WebSphere CloudBurst. Please continue to let us know your thoughts and needs!