The majority of my posts on this blog address using various features of WebSphere CloudBurst to build private cloud computing environments. Today though, I want to switch gears and instead of talking private cloud, let's talk public cloud. Specifically, let's take a look at the capabilities and services delivered via the IBM Smart Business Development and Test on the IBM Cloud (hereafter referred to as the IBM Cloud).
For some of you, the fact that IBM has a public cloud offering may be a little surprising. After all, if you listen to some uninformed critics you may hear that IBM only cares about private clouds for large enterprises. That is simply untrue. The IBM Cloud is an Infrastructure as a Service public cloud that delivers rapid access to services hosted on IBM infrastructure via a self-service web portal. The IBM Cloud offers multiple payment options, including usage-based billing and reserved capacity billing, and even features a cost estimator so you can confidently establish a monthly budget for your usage.
Regardless of whether you use a private or a public cloud, security should always be a chief concern. As such, IBM takes security very seriously in the IBM Public Cloud. The infrastructure that constitutes the cloud is subject to internal IBM security policies that include regular security scans and tight administrative governance. Your data and virtual machines stay in the data center to which you provisioned them, and physical security policies match those of internal IBM data centers. Additionally, you can optionally make use of the virtual private network option to isolate access to the virtual machines that you provision on the IBM Cloud. Rest assured that security in the IBM Cloud was a guiding design principle and not an afterthought.
With the basics out of the way, let's get on to the question I'm sure you have: What can I run on the IBM Cloud? To get you started, the IBM Cloud provides a nice list of public images in its catalog that are ready for you to provision. These images include WebSphere Application Server, WebSphere sMash, DB2, WebSphere Portal Server, IBM Cognos Business Intelligence, Tivoli Monitoring, Rational Build Forge, and many more. In addition to the public images provided by the IBM Cloud, you can build your own private images. Private images allow you to start with a base public image and then customize it by adjusting the configuration or installing new software. Once customized, you can store these private images on the IBM Cloud and provision them whenever needed. Whether you are using public or private images, you have a number of server configurations to choose from in order to host your environments.
While very brief, I hope this overview provides you with some of the more important details regarding the IBM Cloud. There are few, if any, service providers out there with the enterprise expertise of IBM, and I think you see that reflected in the IBM Cloud. If you are looking at public cloud options for your enterprise application environments, you should definitely take a closer look at the IBM Cloud.
Every time I've visited with customers about WebSphere CloudBurst, without fail someone requests that the appliance support products besides the WebSphere Application Server. We started to address these requests with WebSphere CloudBurst 1.1 when we announced the availability of a DB2 Enterprise 9.7 trial virtual image specifically packaged for use in the appliance. Very recently we continued to respond to customer requests by extending the list of supported products in WebSphere CloudBurst to include WebSphere Portal.
The WebSphere Portal Hypervisor Edition, initially offered as a Beta product, is a virtual image packaging of WebSphere Portal 6.1.5 ready for use in the WebSphere CloudBurst Appliance. The image includes a pre-installed, pre-configured instance of WebSphere Portal. Also contained within the image is an IBM HTTP Server instance configured to route to the WebSphere Portal instance and a DB2 instance installed and configured as the external database for WebSphere Portal. The WebSphere Portal instance also includes Web Content Management enablement along with several samples to help users get started right away.
The user experience when building and deploying WebSphere Portal patterns remains consistent with the existing experience for WebSphere Application Server and DB2 patterns. Another good note is that you can expect similar rapid deployment capability for WebSphere Portal patterns. I got a running virtual system, with all the parts I mentioned above installed and configured (meaning no after the fact integration scripting was necessary) in under 15 minutes.
To see more, check out my new demonstration of the WebSphere Portal Hypervisor Edition for the WebSphere CloudBurst Appliance. If you have a WebSphere CloudBurst Appliance you can download the WebSphere Portal Hypervisor Edition image and a usage guide from here.
I spend most of my time talking with our users about the WebSphere CloudBurst Appliance. While I believe the appliance is somewhat of a hybrid among the Infrastructure as a Service and Platform as a Service layers of the cloud, it is definitely closer to IaaS than PaaS. Users recognize that, and they can identify the capabilities of WebSphere CloudBurst that correlate with IaaS cloud functionality.
That said, I often get questions regarding IBM and work in the PaaS arena. These include questions like, 'Is IBM planning to do anything with PaaS?', 'What is your take on PaaS?', 'What kind of applications do you plan on targeting with your PaaS offering?', and more.
Well, rest assured that IBM is definitely embracing the PaaS movement. Instead of trying to answer these questions in this post though, I want to make you aware of a recent InfoQ interview with IBM WebSphere CTO, Jerry Cuomo. In the interview, Jerry answers the questions above and much more. Jerry talks about IBM's plans for PaaS, what such a platform might look like, and how he sees IBM competing against some of the cloud players in this space.
The interview runs about a half hour, but there is a very nice table of contents that allows you to navigate to specific question/answer segments with Jerry. If you are interested in PaaS, and specifically in IBM's intention in this space, I encourage you to take a look at the interview. Let me know what you think!
When one uses IBM Workload Deployer (previously WebSphere CloudBurst) to deploy a virtual system pattern, they benefit from a completely automated deployment process. The automation includes the creation and placement of virtual machines, injection of IP addresses, initiation of internal processes, and invocation of included scripts. Most of these processes are straightforward and require little more than a brief overview. However, the placement of virtual machines stands out, and it's inner workings are the subject of quite a few questions when I discuss the appliance. With that in mind, I thought I would provide a little more information on how the placement algorithm in IBM Workload Deployer works.
The placement subsystem in IBM Workload Deployer considers three primary elements: compute resource, availability, and license optimization. Compute resource availability is the gating factor for placement. That means that IBM Workload Deployer first looks at the available CPU, memory, and storage resource in the collection of hypervisors making up the cloud group(s) you are targeting for deployment. If a particular hypervisor cannot provide enough resource based on the amount you requested for your deployment, then it is automatically taken out of the eligible hosts pool. It is important to note that IBM Workload Deployer will overcommit CPU, and it will overcommit storage if you direct it to do so. It will not overcommit memory because that could severely degrade the performance of the application(s) running in the virtual machines.
After choosing the pool of hypervisors that are capable of hosting the virtual machines in your deployment from a compute resource perspective, the appliance then considers high availability. To better understand this particular placement stage, let's consider an example. Consider you are deploying a pattern based on WebSphere Application Server Hypervisor Edition and it contains two custom node parts. It is conceivable, and in fact likely, that these two custom node parts will host members of the same cluster, and thus the two nodes will support the same applications. As such, IBM Workload Deployer will attempt to place the two custom nodes on different physical machines in order to prevent a single point of failure. Of course, this depends on having two hypervisors with enough resource (CPU, memory, storage) to host the virtual machines, but the appliance makes that decision in the first placement stage.
After considering compute resource and high availability, IBM Workload Deployer moves to the last stage of placement: license optimization. In this stage, the placement subsystem attempts to place the virtual machines on hypervisors in a way that minimizes the licensing cost to you. The appliance can do this because it is aware of IBM virtualization licensing rules and takes those into account during this stage (if you aren't familiar with virtualization licensing rules and you are curious, ask you're sales representative to explain some time). During this stage, it will not violate any resource overcommit directives or rules in place, nor will it compromise system availability, but it will seek to minimize costs within these parameters.
At this point, I should make something clear that may already have occurred to you. You can override most of these placement rules by creating a cloud group containing only one hypervisor. In this case, IBM Workload Deployer will put all virtual machines on the single hypervisor until it runs out of compute resource (memory is likely to be the constraining factor). I would not suggest that you do this unless you have a good reason or you are in a simple pilot phase, but I do like to point out the art of the possible!
While not incredibly deep from a technical perspective, I do hope that this provided a few helpful details on what goes on during the placement stages of deployment. If you have any questions, do let me know.
A while back I had a four part FAQ series inspired by questions arising from customer visits discussing the first release of WebSphere CloudBurst. With the recent release of WebSphere CloudBurst 2.0, I think it is a good time to revisit an FAQ series with an entirely new set of questions.
For the first part of the series, I want to address a question we get all the time now: "What is the difference between WebSphere CloudBurst and WebSphere Virtual Enterprise?" This question was always fairly common, but now even more so because the new Intelligent Management Pack option for WebSphere Application Server Hypervisor Edition allows you to deploy WebSphere Virtual Enterprise cells using WebSphere CloudBurst.
Fundamentally, the difference between the WebSphere CloudBurst Appliance and WebSphere Virtual Enterprise is a complementary one. WebSphere CloudBurst provides a means to create your application environments, deploy them into a shared, cloud environment, and then manage them over time. In this respect, the appliance focuses on bringing cloud-like capabilities to the application infrastructure layer of your application environments. WebSphere CloudBurst does give you management capabilities for your running, virtualized application environments (i.e. applying maintenances and fixes), but for the most part those capabilities do not extend into the application runtime environment.
Now, you may ask why WebSphere CloudBurst does not extend its reach into the application runtime. The answer is simple: We already have a solution that does just that, WebSphere Virtual Enterprise. WebSphere Virtual Enterprise provides capabilities that allow you to dynamically and autonomically manage your application runtime. You can use WebSphere Virtual Enterprise to not only assign performance goals to your applications, but also to declare the importance of a given application meeting its goals relative to other applications in your organization. This enables the dynamic management of your applications and their resources such that your applications perform according to their goals and relative importance to your business. Simply put, you get an elastic runtime at the application layer of your application environments.
As I said, WebSphere CloudBurst and WebSphere Virtual Enterprise are complementary solutions. Both enable notions of cloud computing, but at different layers of your application environments. WebSphere CloudBurst hones in on the application infrastructure components, while WebSphere Virtual Enterprise zeros in on the applications running in those environments. The new Intelligent Management Pack for WebSphere Application Server Hypervisor Edition means that WebSphere CloudBurst can now dispense WebSphere Virtual Enterprise environments into your on-premise cloud. That means you can take advantage of these complementary solutions from a single and simple management plane.
I hope this helps to clear things up. As always, questions and comments are welcome!
When writing a new tool for the WebSphere CloudBurst samples gallery last week, I got the chance to use an API in the CLI that was new to me. Specifically, I got a chance to use the WebSphere CloudBurst CLI in order to retrieve an audit log from the appliance for a specified date period. In case this is new and interesting to you, I thought I would share what I found.
First off, let's take a look at the API I am talking about. It's pretty simple: cloudburst.audit.get(file, start, end). Here, start is the start date for the audit entries and (naturally) end is the end date for those entries. The file parameter simply denotes the location or file object you want to use to store the audit archive retrieved via the get method.
This is a simple enough API. The only wrinkle comes in dealing with calculating the start and end dates. According to the WebSphere CloudBurst Information Center, both the start and end times are 'specified as the number of seconds since midnight, January 1, 1970 UTC. Floating point values can be specified to indicate fractional seconds.' For my use case, I wanted to let a user or calling program pass the start and end times as arguments to the CLI script that retrieves the audit archive. Check out the relevant portion of my script below:
As you can see, the script takes in the start and end time in the MM/dd/yy HH:mm format (i.e. 05/20/10 15:30). It parses the value to produce a date, gets the long value of the date (which is in milliseconds according to the java.util.Date API), and divides that value by 1000. This is to account for the fact that the cloudburst.audit.get method expects you to express the start and end times in seconds. The script passes the converted dates along with the output file location to the get method. The result is a ZIP file that contains an appliance audit, license audit, and PVU audit file for the specified date range.
One of my favorite things about the WebSphere CloudBurst CLI is that it is Jython-based. This means I can leverage Java APIs from my CLI scripts, and that is huge for me because of my existing knowledge of the Java language. You certainly can substitute Python APIs for my use of Java APIs to handle the start and end date calculation. I hope this is helpful, and good luck with the WebSphere CloudBurst CLI!
It's really hard to complain about my work week right now. As I write this blog, I'm sitting in the Congress Center in Düsseldorf, Germany looking out over the Rhine River. As an aside, in Germany it is the Rhein River, and I have a historical connection to this body of water. My surname, Amrhein, translates (loosely) to 'on the Rhein'. It does not take an expert in genealogy to conclude that I have ancestors who at one time or another lived very close to this important German waterway.
Okay, putting the family tree aside for a minute, there is a good reason that I am in Düsseldorf this week. The city, and specifically the Congress Center, is playing host to the IBM European WebSphere Technical Conference. I am here presenting sessions that include a WebSphere CloudBurst overview, a WebSphere CloudBurst hands-on lab, and an up-close look at one of our internal team's use of the appliance. I have done each of these sessions once so far, and attendance was great, audience participation high, and feedback forthcoming. I am hearing and seeing the same thing in other sessions, which is of course, ideal for us presenters.
Now, to focus in on WebSphere CloudBurst for a bit, it seems that I am hearing a recurring question this week from the mostly European audience: "Why is WebSphere CloudBurst delivered as an appliance?" I am sure that I addressed this question in a previous blog post, but I believe it bears revisiting. There are various reasons I could give for the appliance form factor, but I like to distill all of that down into three major reasons: Consumability, Performance, and Security.
From a solution consumability perspective, nothing beats the appliance approach. WebSphere CloudBurst is an integrated hardware and software solution that delivers a specific set of function. You do not have to install software, procure and maintain storage for resources on the appliance (images, patterns, scripts, etc.), and maintain software components over time. You simply drop the appliance in to your data center, perform a one-time initialization, hook it up to the network, and you are ready to start leveraging WebSphere CloudBurst to build out your private cloud. While there is definitely work to setup the cloud infrastructure that WebSphere CloudBurst deploys environments to, we can completely eliminate a significant portion of solution implementation lead time by delivering everything you need in the appliance.
The performance benefits of an appliance approach are a natural result of building an integrated hardware and software stack. Design and development teams provide optimizations in both the hardware and software based on the fact that both the hardware and software have intimate knowledge of each other's design. In other words, this is not a 'least common denominator' tuning approach. Rather, the integrated design leads to enhanced performance for the specific set of functionality provided by WebSphere CloudBurst.
Finally, appliances enable us to deliver a very hardened, secure device. We provide private key encryption of every resource stored on the appliance. That private key is unique to each appliance and cannot be modified. In addition, the physical casing is tamper-resistant. If someone removes the casing, a 'Get Smart' style kill switch puts the appliance in a dormant state. You must send the appliance to IBM so we can reset it before further use, thus providing an additional layer of physical protection on top of the encryption. These security features, plus more, like a shield that prevents anyone from executing code on the appliance, come right out of the box and require no end-user configuration activity. In this way, you can simply focus on leveraging the user security and access controls provided by WebSphere CloudBurst.
If you had any questions on the rationale behind the appliance form factor of WebSphere CloudBurst, I hope this helps. I am off for now... back to the conference and the wonderful city of Düsseldorf.
Not long ago I created a demonstration that highlighted the new support for the PowerVM platform introduced in WebSphere CloudBurst 1.1. In that demonstration I showed how you can deploy to a PowerVM cloud by defining a new cloud group that interfaces with a VMControl instance to manage a pSeries cloud environment. However, in the demo I did not go into much detail about the components of a pSeries cloud used with WebSphere CloudBurst.
Since pictures help me out a lot, I thought I’d start the discussion with an image that depicts the components in the pSeries cloud environment and the workflow when using WebSphere CloudBurst to deploy systems to this environment.
The workflow begins when a user requests the deployment of a pattern and targets that deployment for a PowerVM cloud group. WebSphere CloudBurst first checks that the cloud group contains the compute resources necessary to deploy the pattern. After the resource checks are complete, WebSphere CloudBurst decides where to place each virtual machine that will be created from deployment using its intelligent placement algorithm. No matter the type of the cloud environment being utilized the appliance retains control over placement decisions, thus ensuring the virtual system has been deployed in a way that optimizes both performance and availability.
Once the placement decision has been made, WebSphere CloudBurst communicates with the VMControl instance, which in turn instructs the Hardware Management Console (HMC) to create LPARs on the targeted pSeries machines. These LPARs will host the virtual machines that represent the WebSphere Application Server nodes in your virtual system. After the LPARs have been created, WebSphere CloudBurst leverages VMControl to instruct the Network Installation Manager (NIM) to deploy virtual images to the necessary LPARs.
When the LPARs have been created and the virtual images have been deployed to those LPARs, the common process of virtual system creation can proceed. This process includes starting virtual machines, starting WebSphere Application Server components, and running any user-supplied scripts. The end result is a ready to use, virtualized WebSphere Application Server cell running on the PowerVM hypervisor platform.
I hope this provides a nice overview of the underlying environment when PowerVM hypervisors are used with WebSphere CloudBurst. As for those users who are not WebSphere CloudBurst cloud administrators, the information above is nice to know but not necessary. The user experience with respect to building, deploying, and managing your virtualized application environments with WebSphere CloudBurst is consistent regardless of the type of your cloud platform.
I wanted to take a brief moment to remind you that the Enabling cloud computing with WebSphere campaign is well underway. Check out the various presentations and podcasts on solutions such as WebSphere Virtual Enterprise, WebSphere CloudBurst, Cast Iron Systems, WebSphere DataPower Application Optimization, WebSpan Integration as a Service Cloud, WebSphere Application Server Feature Pack for Dynamic Scripting, and more. All you have to do is navigate to the site, and you can download presentations or listen to audio/video replays at your convenience.
In addition to the podcast sessions, I want to point out a couple of upcoming events. The first is a live Q&A webcast that takes place next Thursday (9/23). Myself and other IBMers will be joining the webcast to answer your questions about cloud computing and WebSphere solutions. You can register to attend the session here, and you can submit questions ahead of time here.
A week after the live Q&A webcast (9/30), there will be an online JAM. Think of this as an online chat between IBMers and you, our users. You can ask questions, give us your feedback and suggestions, or just watch the proceedings. Like with the live Q&A webcast, you can submit questions ahead of time by navigating here.
I hope you are getting a chance to take advantage of some, or all of the campaign. Of course, you do not have to wait for the sessions to ask questions or give feedback. You can always leave a comment here or reach out to me on Twitter (@damrhein). Happy Friday!
In the previous post Dustin shared a great video demonstrating the value of the IBM Image Construction and Composition Tool that is now delivered with IBM Workload Deployer V3.1. This is certainly one of the key new features of IBM Workload Deployer V3.1. However, there are also a number of other compelling enhancements and features that we would like communicate.
I created the attached video to highlight some of these features included in new Workload Deployer release. The video uses the web console to highlight some of the features and capabilities, giving a brief introduction for each one. Without going into a lot of depth, I think it gives a nice overview. This may be especially helpful if you already have Workload Deployer v3.0 and want to see the value you will get when you upgrade to Workload Deployer v3.1. Check it out.
We believe that these new features make IBM Workload Deployer V3.1 an even better solution for your private cloud needs. Please let us know what you think.
In keeping with the impressive release pace, WebSphere CloudBurst 184.108.40.206 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 220.127.116.11, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 18.104.22.168 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 22.214.171.124, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 126.96.36.199, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
When I talk to users familiar with both WebSphere CloudBurst and the IBM Systems Director VMControl offering, there is sometimes a bit of confusion. It is not surprising. Both WebSphere CloudBurst and IBM Systems Director VMControl allow users to create and manage virtualized environments. That leads us to an oft-asked question: What is the difference between WebSphere CloudBurst and IBM Systems Director VMControl?
The simple answer is that the difference in the two offerings is the degree to which they are purpose-built. IBM Systems Director VMControl equips users with broadly applicable capabilities to create and manage environments consisting of virtual machines. These capabilities extend to PowerVM, z/VM, VMware, and Microsoft Hyper-V hypervisor platforms. IBM Systems Director VMControl is not necessarily knowledgeable about the software running in the virtual machine, but it does allow the user to manage that asset effectively.
Compare and contrast that with the capabilities provided by WebSphere CloudBurst. The appliance also enables users to create and manage environments consisting of virtual machines. The difference is that WebSphere CloudBurst is purpose-built to provide you with the ability to create, deploy, and manage virtualized WebSphere environments quickly and easily.
What does that mean? Well, on one hand it means that WebSphere CloudBurst does not treat the virtual machines it creates like a black box. In fact, it knows quite a bit about the software running inside those machines, and provides users with out-of-the-box configuration and administration capabilities for said software. WebSphere CloudBurst knows how to interact with the software in the virtual machines to do things like federate WebSphere nodes into a cell, create application server clusters, configure environments for optimal performance, apply fixes and upgrades, and more. The best part is you do not need to supply any of your own scripts to do this. In short, the appliance ships with WebSphere intelligence.
Beyond this WebSphere intelligence, WebSphere CloudBurst enables users to create customized WebSphere environments (from the operating system up) and codify those customized environments in the form of patterns. These patterns, which represent your very own WebSphere application environments, enable you to deploy your applications rapidly, repeatedly and with extremely consistent results. In addition, the appliance allows you to define varying roles for users, each of those mapping to traditional data center responsibilities (i.e. customizing the operating system, building application infrastructure, carrying out middleware customizations, etc.). Again, WebSphere CloudBurst was purpose-built with WebSphere environments in mind.
It is not all about comparing and contrasting WebSphere CloudBurst and IBM Systems Director VMControl. In the case that you are using WebSphere CloudBurst to create and manage virtualized WebSphere environments on top of the PowerVM hypervisor platform, IBM Systems Director VMControl is actually a required component. In this scenario, the two offerings are complementary. WebSphere CloudBurst communicates with IBM Systems Director VMControl in order to create and configure the virtualized WebSphere environment requested by the user. This image below depicts how the two products work in conjunction in a PowerVM environment.
I hope this helps to shed light on how WebSphere CloudBurst compares to, contrasts with, and complements IBM Systems Director VMControl. Feel free to reach out to me on the blog or on Twitter (@damrhein) with any questions I did not answer here.
Lately Joe and I have been pretty vocal about bringing up the new IBM Image Construction and Composition Tool capabilities in IBM Workload Deployer v3.1. While writing about such new capabilities is always good, I think seeing is believing. In that light, I hope you will take a look at the recent demo I put together that shows how to use the Image Construction and Composition Tool with IBM Workload Deployer v3.1!
This week is a busy week getting ready for IMPACT next week. I'm looking forward to the conference, and I thought I would share a few things on my agenda. Naturally, my agenda includes the sessions I am running:
10:15 AM - 11:30 AM
TDC-2973A Meet the Experts and Demo: WebSphere Cloudburst Appliance
Come and meet the experts responsible for the WebSphere Cloudburst Appliance, and see a demo of its functionality in this informal setting.
1:30 PM - 4:30 PM
TDC-1369A Lab: Working with the WebSphere CloudBurst Appliance
Come and work hands on with the WebSphere CloudBurst Appliance to create your own WebSphere application environments in a cloud. The lab will guide you through using WebSphere CloudBurst to create and deploy WebSphere virtual systems in a private cloud. Youll learn how to create custom WebSphere and DB2 topologies by extending virtual images, creating patterns, and using scripts. You'll get a chance to work with the easy to use Web 2.0 user interface. Youll be amazed at the ease of use WebSphere CloudBurst brings to configuring, deploying, and running WebSphere environments in a private cloud.
1:30 PM - 2:45 PM
TAD-1370A Simplifying Development using Rational Tools with WebSphere CloudBurst Appliance
Are you looking to really simplify your WebSphere development and test environments - including never needing to install or configure WebSphere again? If so, come hear about how you can use the IBM WebSphere CloudBurst Appliance along with Rational tools like the Rational Automation Framework for WebSphere and Rational Software Architect to create a dynamic development and test cloud. With the integration of WebSphere CloudBurst and selected Rational tools, you worry about the application development, while WebSphere CloudBurst worries about the WebSphere infrastructure and your cloud resources. Come to this combination of presentation and demo to see how easy development and testing can be.
In addition to these, there are some other exciting WebSphere CloudBurst sessions on tap:
3:45 PM - 5:00 PM
TDC-2498A WebSphere CloudBurst Appliance at Lowe's
Lowe's is evaluating WebSphere CloudBurst Appliance (WCA) as a tool for managing their X86 and PowerVM environments in a cloud fashion. Come to hear how Lowes believes WCA fits into an enterprise companys cloud strategy. This session will discuss the work done at Lowes so far and the use cases planned for WCA at Lowe's. Attendees can understand how WCA is delivering value in an adopter's environment.
5:15 PM - 6:30 PM
TDC-1368A Introduction to WebSphere CloudBurst Appliance
The WebSphere CloudBurst Appliance delivers capabilities to create, monitor, and maintain private WebSphere clouds. It provides you the capability to quickly and simply create, deploy, and maintain virtualized WebSphere application environments running on a heterogeneous, shared pool of resources that make up your cloud. In this session, we will provide an overview of the WebSphere CloudBurst Appliance features and benefits and demonstrate the latest capabilities.
1:30 PM - 2:45 PM
TDC-1758A Building Private Clouds with WebSphere CloudBurst Appliance
Come join us as we discuss how the WebSphere development and test organization built a large private cloud from the ground up using WebSphere CloudBurst Appliance. We have lowered the entry requirement to get a meaningful WebSphere Application Server development environment (days down to minutes), saved costs by improving hardware utilization while simplifying our management of physical resources and topologies. We will discuss best practices for adhering to security requirements, creating reusable automation scripts for your applications and configurations and maintaining your cloud. Allow us to share our experience in using WebSphere CloudBurst Appliance to create our automated regression infrastructure, and to provide up-to-date deployments to our test team.
4:45 PM - 6:00 PM
TDC-1946A BSkyB's Experiences using the WebSphere CloudBurst Appliance V1.1
At Impact 2009, IBM announced the launch of the WebSphere CloudBurst Appliance. BSkyB witnessed this launch and were very keen to understand the device's potential. This presentation details their experiences to date, and their vision for incorporating the appliance into their organization. Details will include bringing the device in house, setting up the cloud, and doing deployments. BSkyB will also discuss the customisation process, and how they used the extend / capture and scripting capabilities to add content including WebSphere Process Server. The presenters will share their lessons learned as they continue their journey using WebSphere CloudBurst for agile environment provisioning and simplified WebSphere Administration.
10:15 AM - 11:30 AM
TDC-2063A Panel: WebSphere CloudBurst Appliance Customers Describe their Experiences
A panel of several customers who have adopted WebSphere CloudBurst Appliance will discuss their experiences with the product, and answer questions related to their experiences.
9:00 AM - 10:15 AM
TDC-1884A Using WebSphere CloudBurst Appliance in a PowerVM Environment
This session will discuss the concepts and issues associated with implementing the WebSphere CloudBurst Appliance (WCA) in a PowerVM environment. The components of the implementation including VMControl, IBM System Director, HMC, NIM. and WebSphere CloudBurst will be explained, along with their relationships and functions. This in-depth session will also provide best practices from early adopter deployments and performance experiences.
1:30 PM - 2:45 PM
TBR-2491A Customizing a Private Cloud for WebSphere Process Server Applications
Every enterprise has a unique set of standards when it comes to the applications that are deployed and the qualities of service that are required for those applications. Come to this session to learn some of the best practices around pattern customization and maintenance of the images in the WebSphere CloudBurst Appliance for your specific requirements. We will use the creation of a WebSphere Process Server double gold topology pattern to show these best practices. This session will also cover the practices involved with maintaining these patterns.
As you can see there is going to be quite a bit of activity around WebSphere CloudBurst at IBM IMPACT 2010. The lists above is not all encompassing either. Visit the IBM Impact site for more information. If you are registered to attend, be sure to visit the agenda builder website for the conference.
Yesterday, we kicked off a WebSphere in the Clouds campaign designed to connect you with IBMers that can help you to leverage WebSphere solutions to build clouds. The campaign consists of webcasts, podcasts, live Q&A sessions, and online JAMs. You can listen to replays and sign up for upcoming events by visiting the Global WebSphere Community website.
Next week, the campaign delivers a series of podcasts that discuss the WebSphere technologies that form the building blocks of clouds. These podcasts will discuss both the business and technical aspects of these solutions, and they will cover topics like application infrastructure in the cloud, policy-based workload management using application virtualization, hybrid cloud integration, and more. Over the past few days, I had the opportunity to catch up with the various presenters of these podcasts to ask them a few questions about their solutions. These interviews provide a nice sneak peak at what is coming in the podcasts, and I will be posting them here in the coming days.
To kick things off, I'm posting a video interview with Marc Haberkorn. Marc is the WebSphere Product Manager for WebSphere CloudBurst, WebSphere Application Server Hypervisor Edition, and WebSphere Virtual Enterprise. My colleague, Ryan Boyles, caught up with Marc and got his thoughts on how these solutions enable virtualization and automation for your cloud environments. Enjoy!