When one uses IBM Workload Deployer (previously WebSphere CloudBurst) to deploy a virtual system pattern, they benefit from a completely automated deployment process. The automation includes the creation and placement of virtual machines, injection of IP addresses, initiation of internal processes, and invocation of included scripts. Most of these processes are straightforward and require little more than a brief overview. However, the placement of virtual machines stands out, and it's inner workings are the subject of quite a few questions when I discuss the appliance. With that in mind, I thought I would provide a little more information on how the placement algorithm in IBM Workload Deployer works.
The placement subsystem in IBM Workload Deployer considers three primary elements: compute resource, availability, and license optimization. Compute resource availability is the gating factor for placement. That means that IBM Workload Deployer first looks at the available CPU, memory, and storage resource in the collection of hypervisors making up the cloud group(s) you are targeting for deployment. If a particular hypervisor cannot provide enough resource based on the amount you requested for your deployment, then it is automatically taken out of the eligible hosts pool. It is important to note that IBM Workload Deployer will overcommit CPU, and it will overcommit storage if you direct it to do so. It will not overcommit memory because that could severely degrade the performance of the application(s) running in the virtual machines.
After choosing the pool of hypervisors that are capable of hosting the virtual machines in your deployment from a compute resource perspective, the appliance then considers high availability. To better understand this particular placement stage, let's consider an example. Consider you are deploying a pattern based on WebSphere Application Server Hypervisor Edition and it contains two custom node parts. It is conceivable, and in fact likely, that these two custom node parts will host members of the same cluster, and thus the two nodes will support the same applications. As such, IBM Workload Deployer will attempt to place the two custom nodes on different physical machines in order to prevent a single point of failure. Of course, this depends on having two hypervisors with enough resource (CPU, memory, storage) to host the virtual machines, but the appliance makes that decision in the first placement stage.
After considering compute resource and high availability, IBM Workload Deployer moves to the last stage of placement: license optimization. In this stage, the placement subsystem attempts to place the virtual machines on hypervisors in a way that minimizes the licensing cost to you. The appliance can do this because it is aware of IBM virtualization licensing rules and takes those into account during this stage (if you aren't familiar with virtualization licensing rules and you are curious, ask you're sales representative to explain some time). During this stage, it will not violate any resource overcommit directives or rules in place, nor will it compromise system availability, but it will seek to minimize costs within these parameters.
At this point, I should make something clear that may already have occurred to you. You can override most of these placement rules by creating a cloud group containing only one hypervisor. In this case, IBM Workload Deployer will put all virtual machines on the single hypervisor until it runs out of compute resource (memory is likely to be the constraining factor). I would not suggest that you do this unless you have a good reason or you are in a simple pilot phase, but I do like to point out the art of the possible!
While not incredibly deep from a technical perspective, I do hope that this provided a few helpful details on what goes on during the placement stages of deployment. If you have any questions, do let me know.
Jason McGee will be leading the second GWC Lab Chat this week on Wednesday, 4/20. The very timely topic is related to recent announcements from IBM regarding the IBM Workload Deployer (see previous posts). Entitled "Application-Centric Cloud Computing" the discussion will focus on the concept of deploying and managing your application workloads in a shared, self-managed environment rather than manually creating and managing the application middleware topologies. It places the focus on the application rather than the infrastructure. This concept promises to deliver greater simplicity, elasticity, and
density among other things. It can position your business to react more
quickly and efficiently to the increasing demands of your customers and
free you from the managing all of the details.
Many of you may have already heard Jason speak last week at IMPACT 2011 in the cloud mini main tent or perhaps at any number of other sessions that Jason was involved in. Jason is the key architect behind IBM's WebSphere cloud activities. Obviously, Jason understands the cloud space very well and has a clear view of the evolution into Application-Centric Cloud Computing. This GWC Lab Chat will provide the opportunity to get your questions answered and share your perspective on this technology.
Jason will provide a brief introduction to the concepts and ideas and then lead an open discussion. Put it on your calendar and plan to attend - and please plan to bring your questions and comments to help foster a rich discussion. We want to hear from you.
If you haven't registered yet it is not too late - learn more and register here. It is easy to register and there is no cost. This is a very timely event and a great way to dig a little more deeply into concepts you first heard at IMPACT or perhaps hear them for the first time. Don't miss it!
IBM Impact 2011 was a wildly busy week! Customer meetings, entertaining keynotes, informative sessions, and hands-on labs packed the 6 days with more than enough action. I spent a lot of the week presenting sessions and conducting labs for the newly announced IBM Workload Deployer. As one would expect with any new announcement, we got tons of questions about IBM Workload Deployer. While I cannot capture all the questions and their answers here, I will try to cover some of the more prevalent ones below.
Question: What happened to WebSphere CloudBurst?
Answer: The short answer is, it simply went through a rename. WebSphere CloudBurst became IBM Workload Deployer v3.0. The version 3.0 acknowledges this is an evolution of what we started with WebSphere CloudBurst, which was at version 2.0. Why remove WebSphere from the name? The fact that this is now an IBM branded offering is more accurate as it is capable of deploying and managing more than just WebSphere software.
Question: What is new in IBM Workload Deployer?
Answer: While there are many new features that I will be talking about over the coming months, the most prominent new facet is the introduction of workload patterns (also referred to as virtual application patterns). As opposed to topology patterns (traditionally referred to as simply patterns in the WebSphere CloudBurst product), workload patterns raise the level of abstraction to the application level. Instead of focusing on application infrastructure and its configuration as you do with topology patterns, workload patterns allow you to focus on the application and its requirements. When using workload patterns, you provide the application, attach policies that specify functional and non-functional requirements, and deploy. IBM Workload Deployer handles deploying and integration the middleware infrastructure necessary to support the application, and it automatically deploys your application on top of that middleware. In addition, IBM Workload Deployer manages the application runtime in accordance with the policies that you specify in order to provide capabilities such as runtime elasticity.
Question: If I am a current WebSphere CloudBurst user, what does this mean for me?
Answer: Not to worry. You will be able to use all of your WebSphere CloudBurst assets (patterns, scripts, images) in the new IBM Workload Deployer. All of the capabilities previously in WebSphere CloudBurst are present in IBM Workload Deployer (terminology may vary slightly -- topology pattern instead of just pattern for instance). Additionally, we continue to expand on the functionality that you are familiar with from WebSphere CloudBurst. This includes updates for Environment Profiles, new IBM Hypervisor Edition images, new pattern building capabilities, and more. Stay tuned for more information about these new features and for information on how you can move your WebSphere CloudBurst resources to the new IBM Workload Deployer.
Question: How do I choose between using workload and topology patterns?
Answer: There are a number of factors that will lead you to using either workload patterns, topology patterns, or both. The primary decision point will be how much control you really need (not want). When using workload patterns, you sacrifice some customization control over the configuration, integration, and administration of the middleware application environment since the workload pattern and management model abstracts away the 'guts' of the system. Everything about the workload pattern is application-centric. On the other hand, topology patterns give you intimate control over the configuration, integration, and administration of the middleware application environment. As a general rule of thumb, if your application requirements match the capabilities of a workload pattern, that is the way to go as it can greatly reduce complexity and cost associated with deployment and management. If a workload pattern does not meet the needs of your application, topology patterns can still greatly reduce cost and complexity and you can tailor them to fit almost any need. Beyond generalities, there is no hard and fast rule for choosing one over the other. It comes down to understanding your application environment and its needs.
Question: Is IBM Workload Deployer an appliance like WebSphere CloudBurst?
Answer: Yes, it is still an appliance, but an updated one! The new appliance is 2U, and it provides more storage, processing power, and memory. It is still just as easy to setup, but just slightly bigger.
Well, that is all for now, but I will be back many times over the coming months with more information. In the meantime, if you have any questions, please leave them in a comment below.
I hate sitting on secrets. I always have. I understand that sometimes it's in the best interest of everyone (and your job) to keep tight lips, but that does not make it any more fun. Inevitably, the run-up to our annual Impact conference means everyone in the lab is doing their fair share of secret keeping -- just waiting for announce time. For a lot of us, that day ended Tuesday with the announcement of the IBM Workload Deployer v3.0.
Now, you may be wondering, 'I have never heard of this. Why is it version 3.0??' Well, IBM Workload Deployer is a sort of evolution of the WebSphere CloudBurst Appliance, which was previously at version 2.0. This is good news for all of our current WebSphere CloudBurst users because all of the functionality (plus new bits of course) that they have been using in WebSphere CloudBurst are present in IBM Workload Deployer. You can use and customize our IBM Hypervisor Edition images in IBM Workload Deployer. You can build and deploy custom patterns that contain custom scripts in order to create highly customized IBM middleware environments. So, what's the big deal here? Two words: workload patterns.
Workload patterns represent a new cloud deployment model and are an evolution of the traditional topology patterns you may have seen with WebSphere CloudBurst Appliance (I am a little torn between evolution and revolution, but that's splitting hairs). Fundamentally, workload patterns raise the level of abstraction one notch higher than topology patterns and put the focus on the application. That means, when you use a workload pattern the focus is on the application instead of the application infrastructure. Perhaps an example would be helpful to illustrate how a workload pattern may work in IBM Workload Deployer.
Let's consider the use of a workload pattern that was part of the recent announcement, the IBM Workload Deployer Pattern for Web Applications v1.0. Just how might something like this work? It's simple really. You upload your application (maybe a WAR or EAR file), upload a database schema file (if you want to deploy a database with the solution), upload an LDIF file (if you want to setup an LDAP in the deployment to configure application security), attach policies that describe application requirements (autonomic scaling behavior, availability guidelines, etc), and hit the deploy button. IBM Workload Deployer handles setting up the necessary application middleware, installing and configuring applications, and then managing the resultant runtime in accordance with the policies you defined. In short, workload patterns provide a completely application centric approach to deploying environments to the cloud.
Now, if you are a middleware administrator, application developer, or just a keen observer, you probably have picked up on the fact that in order to deliver something as consumable and easy to use as what I described above, one must make a certain number of assumptions. You are right. Workload patterns encapsulate the installation, configuration, and integration of middleware, as well as the installation and configuration of applications that run on that middleware. Most of this is completely hidden from you, the user. This means you have less control over configuration and integration, but you also have significantly reduced labor and increased freedom/agility. You can concentrate on the development of the application and its components and let IBM Workload Deployer create and manage the infrastructure that services that application.
Having shown and lobbied a bit for the benefits of workload patterns, I also completely understand that sometimes you just need more control. That is not a problem in IBM Workload Deployer because as I said before, you can still create custom patterns, with custom scripts based on custom IBM Hypervisor Edition images. The bottom line is that the IBM Workload Deployer offers choice and flexibility. If your application profile meshes well with a workload pattern, by all means use it. If you need more control over configuration or more highly customized environments, look into IBM Hypervisor Edition images and topology patterns. They are both present in IBM Workload Deployer, and the choice is yours.
If you happen to be coming to IBM Impact next week, there will be much more information about IBM Workload Deployer. I encourage you to drop-by our sessions, ask questions, and take the opportunity to meet some of our IBM lab experts. Hope to see you in Las Vegas!
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
I hardly ever have a conversation about WebSphere CloudBurst, or generally cloud computing for application middleware, without the topic of databases coming up. Databases are such an important piece of nearly every application middleware environment, so users want to be sure that whatever they do for their application servers, they can also do for the databases on which their applications rely. That is why the capability to deploy DB2 from WebSphere CloudBurst has been around for as nearly as long as the capability to deploy WebSphere Application Server.
Even though DB2 deployment capability has been around for a while, there are still some common misconceptions regarding the offering. First, I have talked to a fair number of users who are under the impression that we only offer a trial version of DB2 for deployment via WebSphere CloudBurst. While that was true for the first few months of the offering, that is no longer the case. For several months now, a fully supported, 64 bit, production-ready DB2 image has been ready for use in WebSphere CloudBurst. If you were waiting for a DB2 image that you could go live with, wait no longer!
The other misconception, or rather, point of confusion, arises from the fact that the DB2 image for WebSphere CloudBurst is not, by name, a Hypervisor Edition image. I can assure you that is in name only. The DB2 image looks like and behaves like any other IBM Hypervisor Edition image once you load it into the appliance. You can use it to build and deploy patterns in the same way you use other images in WebSphere CloudBurst. You may just have trouble finding it if you search for 'DB2 Hypervisor Edition' as opposed to 'DB2 Server for WebSphere CloudBurst Appliance.'
Instead of going into further detail, I want to refer you to a blog entry from a fellow IBMer, Leon Katsnelson. Leon is a program director for DB2 and is responsible for the team that develops and delivers the DB2 image for WebSphere CloudBurst. In his most recent post, he provides a nice overview of the image and gives good information for those looking to use DB2 and WebSphere CloudBurst (there is also a bit on cloud computing at the beginning that I think is spot on). Check out Leon's post, and let us know what you think!
In last week's post, I put the spotlight on various aspects of bundles in the Image Construction and Composition Tool. I finished with a look at a WebSphere CloudBurst virtual image created from the bundle. However, you do not just magically go from a bundle to an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. Today, I want to show you how to go from a bundle to a custom virtual image using the IBM Image Construction and Composition Tool.
Once you have defined at least one bundle and one base operating system image, you are ready to compose a custom image. We already talked about creating a bundle, but the base operating system image is a new topic. You can do this by either starting from ISO and kickstart configuration files, or you can import an existing Open Virtual Appliance (OVA) image that contains your operating system of choice. Once you have that base image imported or defined in the Image Construction and Composition Tool, you can extend it to create a custom image on top of the base OS image.
After creating your extended image, you can add bundles that represent the software you want to install in your custom image. Simply click on the Software tab of the new virtual image. Click the add icon, and select the bundle that you want to add. You can add as many bundles as you would like to your custom image.
After adding a bundle, it will show up in the Planned list of software for the image. Click on it to display its details in the right side of the screen. You will notice General, Install, and Configuration sections for the bundle. In the Install section, you will find a list of the installation parameters you defined for the bundle. You can provide values for the parameters at this time.
If you click on the Configure section, you will see all of the configuration paramters you specified for the bundle. You can provide default values, and you can specify whether or not these should be configurable by deployers of your custom image. If you mark them as configurable, users will be able to provide values for the parameters at image deploy time, regardless of whether they provision the image using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
After you add the necessary bundles and specify installation and configuration data, you can save the image. Upon saving, the image status changes from Synchronized to Out of Sync.
Now you are ready to synchronize the image. To do this, simply click the synchronize icon. This will result in the creation of a virtual machine in the cloud envrionment (VMware or IBM Cloud) you defined in the selected cloud provider. The Image Construction and Composition Tool will then invoke the appropriate installation tasks (per the bundles you included in the image) within the running virtual machine. It will also copy over any configuration scripts you defined in the bundle.
After a while, the synchronization process completes, and the image returns to the Synchronized state. At this point, you are ready to capture the image by clicking the capture icon. This results in the creation of an OVA virtual image with your customizations. When the capture process completes, the image status changes to Deployable.
Once the image is in the deployable state, it is nearly ready to use. If you are using the IBM Cloud as your cloud provider, you can simply mark the image complete by clicking the complete icon. At this point, the image will show up in your private catalog on the IBM Cloud and it is ready to use. If you are using VMware as the cloud provider, you need to export the image. Click the export icon and provide information about an SCP-enabled server to which you want to export the image. Ideally, this location is directly reachable by the WebSphere CloudBurst or Tivoli Provisioning Manager environment into which you will import the image.
You can monitor the export status in a separate window by clicking on a link shown after clicking the OK button in the dialog above. When the export finishes, you are ready to import your new custom virtual image into WebSphere CloudBurst or Tivoli Provisioning Manager.
I hope the last three posts have given you a better idea of what the new IBM Image Construction and Composition Tool is all about. There will definitely be more to come about this tool in the near future, but in the meantime, if you have any questions or comments, please reach out to me. Until then, good luck and full speed ahead on your custom image compositions!
When I talk with WebSphere CloudBurst users, the topic of custom virtual images comes up frequently. In some cases they simply want to customize a shipped IBM Hypervisor Edition, and in other cases they want to create a completely custom image. Creating a customized version of an IBM Hypervisor Edition is relatively easy since we give you extend & capture in WebSphere CloudBurst. Creating a completely custom image has historically been a bit tougher, mostly owing ot the fact that there was not a standard tool or process for image assembly. I am happy to say that today's publication of the IBM Image Construction and Composition Tool changes all that.
Watch a demo of the IBM Image Construction and Composition Tool
The primary purpose of the Image Construction and Composition Tool is to enable a modular approach to virtual image construction, while taking into account the typical division of responsibilities within an organization. The tool allows the right people within an organization to contribute their specialized knowledge as appropriate to the virtual image creation process. This means OS teams can handle the OS and software teams can handle the appropriate software. A separate image builder can then use both OS and software components to meet the needs of users within the organization. Best of all, the image builder does not need intimate knowledge of how to install or configure any of the components in the image. They simply need to know which OS and software components to use.
When using the Image Construction and Composition Tool, you start by defining the base operating system you wish to use for your images. You can do this by importing an existing virtual image with an OS already installed, providing an ISO for the OS, or pointing to a base OS image on the IBM Cloud. The bottom line is that you have necessary flexibility to start with your certified or ‘golden’ operating system build. Once you have the base OS image defined in the Image Construction and Composition Tool, you can start defining custom software for use in the images you will compose.
In the tool, bundles represent the software you wish to install within a virtual image. The definition of a bundle contains two major parts: Installation and Configuration. The installation component of a bundle tells the Image Construction and Composition Tool how to install your software into the virtual image. You provide a script or set of scripts that install the necessary components into your image, and you direct the tool to call these scripts. These tasks run once during the initial creation of the virtual image, thus allowing you to capture large binaries, long-running installation tasks, or other necessary actions directly into your image.
The configuration section of a bundle defines actions that configure the software installed into the image. Like with the installation tasks, you provide a script or set of scripts for configuration tasks. Unlike installation tasks that run exactly once, configuration scripts become part of the image’s activation framework and as such, run during each image deployment. Using the tool, you can define input parameters for configuration scripts and optionally expose them so that users can provide values for the parameters at image deploy-time. Configuration tasks are important in providing flexibility that allows users to leverage a single virtual image for a number of different deployment scenarios.
Once you have your base OS image and one or more bundles defined in the Image Construction and Composition Tool, you can compose a virtual image. To compose a virtual image, you extend the base OS image and add any number of bundles into the new image. A base OS image plus a set of bundles defines a unique image.
After you define the image you want to construct, you initiate a synchronize action in the Image Construction and Composition Tool. When you start the synchronize action, the tool first creates a virtual machine in either a VMware or IBM Cloud environment (based on how you configured the tool). Next, the installation tasks of each bundle you included in the virtual image run to install the required software. Finally, the tool copies the configuration scripts from each bundle into the virtual machine and adds them to the image’s activation framework. This ensures the automatic invocation of all configuration scripts during subsequent image deployments.
Once the image is in the synchronized state, you can capture it. Capturing the image results in the creation of a virtual image based on the state of the synchronized virtual machine. The tool also automates the generation of metadata that becomes part of the virtual image package. When the capture of the virtual image completes, you can export it from the Image Construction and Composition Tool and deploy it using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
I am excited for users to get their hands on the Image Construction and Composition Tool. I believe it represents the first big step in helping users to design and construct more sustainable virtual images. Did I mention it is completely free to download and use? Visit the Image Construction and Composition Tool website for more details and a download link. I look forward to your comments and feedback.
In previous posts, I have discussed the integration capability between WebSphere CloudBurst and Tivoli Service Automation Manager. Most recently, I discussed this in the context of integrating WebSphere and IBM CloudBurst. Today, I am happy to announce the publication of an article I co-wrote with Marcin Malawski from TSAM development on the subject of this integration.
If you are a WebSphere user interested in a holistic approach in building out a private cloud, I strongly recommend that you check the article out. If you are currently an IBM CloudBurst, IBM Service Delivery Manager, or Tivoli Service Automation Manager user and you provision a significant number of WebSphere environments, I strongly recommend that you check the article out. In fact, regardless of your current situation, do me a favor and check the article out!
As always, I look forward to feedback and comments. Good, bad, or indifferent. You can leave your comments here or on the article page. I look forward to hearing from you!
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
One of my favorite books from childhood is If You Give a Mouse a Cookie. Although targeted at children, the book illustrates a frequently occurring human behavior that is important for all of us understand. That behavior is the tendency for escalating expectations. The book offers this up by starting out with the simple action of giving a mouse a cookie. The mouse in turn asks for a glass of milk, various flavors of cookies, and on and on, until the mouse circles back to asking for another cookie.
Nearly all of us exhibit this same kind of behavior, and it can often produce positive results. In particular, in IT we always push for the next best thing or a slightly better outcome. Personally, I am no stranger to this behavior because I experience it from WebSphere CloudBurst users quite frequently. In these cases, it usually revolves around one particular outcome: speed of deployment.
Bar none, users of WebSphere CloudBurst are experiencing unprecedented deployment times for the environments they dispense through the appliance. The fact that we say you can deploy meaningful enterprise application environments in a matter of minutes is far beyond just marketing literature. Our users prove it everyday. However, just because they are deploying things faster than ever does not mean they are content to rest on those achievements. They want to push the envelope, and I love it.
For our users looking to achieve even speedier deployment times, I offer up one reminder and one tip. First, analyze all of your script packages to ensure you are using the right means of customization. If you have some scripts that run for considerably longer than most other script packages, you may want to at least consider applying that customization by creating a custom image. You still need to adhere to the customization principles outlined here, but you may benefit from applying the customization in an image once and avoiding the penalty for applying it during every deployment. You may also be able to break this customization out with a combination of a custom image and script packages. For instance, instead of having a script that installs and configures monitoring agents, you may install the agents in a custom image and configure them during deployment. Being selective about how and when you apply customizations can go a long way in improving your deployment times.
In addition to the reminder above, I also have a tip. Take a look at all of the script packages you use in pattern deployments and look to see if there are any that you can apply in an asynchronous manner. In other words, identify customizations that need to start, but not necessarily complete as part of the deployment process. Going back to our example of configuring monitoring agents during the deployment process, it may be important to kick off the configuration script during deployment, but is it crucial to wait on the results? Maybe not. If it is not, consider defining the executable argument in your script package in a manner that kicks off the execution and proceeds -- i.e. nohup executable command &. This approach can save deployment time in certain situations.
My advice to users of WebSphere CloudBurst: keep pushing your deployment process! Pare as many minutes off the process as you can. I hope that the tips above help in that regard, and be sure to pass along other techniques that you have found helpful.
Maybe you remember, but not long ago I wrote a post about scenarios when WebSphere CloudBurst and Rational Automation Framework for WebSphere (RAFW) combine to form quite the pair. You can read that post for details, but the basic scenarios were configuring and capturing, importing existing environments into WebSphere CloudBurst, and migrating from virtual to physical installations. Well, after talking with customers and colleagues lately, you can add another scenario to the list: version-to-version WebSphere Application Server migrations.
I want to be clear here about one thing before I go further. I am in no way advocating against the use of the migration tooling that ships with WebSphere Application Server. It is an excellent tool that can make migrations simple and fast. I am merely pointing out that when it comes to version-to-version migrations you have options, and you should survey them all before making a decision.
With that understanding, let's take a look at WebSphere CloudBurst and RAFW in the context of a version-to-version migration. This integrated approach to migration is ideal if you are amenable to moving up to a newer version of WebSphere Application Server in a cloud-based environment. Using both products makes migrations fast and easy, and you can be very confident that the configuration of the migrated environment is faithful to the original. The figure below shows the basic flow of the migration and breaks it down into a set of discrete steps.
Now, for a quick break down of each step:
Extract config & apps from old environment: The first step involves pointing RAFW at your existing configuration, the one you want to migrate from, and using an out-of-the-box action to import all of the configuration into a RAFW environment. You can also import your application binaries in this step.
Store config & apps from old environment: In step two, you will store the extracted configuration and application binaries in a source control repository or some backup location separate from your RAFW server. This is an optional, but recommended step.
Analyze and update apps: Before migrating your applications to the newer version of WebSphere Application Server, you can use the completely free Application Migration Toolkit to analyze the source code of your applications. This toolkit will recommend any required updates to ensure your application continues to behave as expected when moving to the new version. Again, this is an optional step, but the toolkit is free and very handy. So, why not?
Deploy new version of the environment: Step four starts by building a new WebSphere CloudBurst pattern. This new pattern matches the topology of the environment you are migrating from, and you build it from an image containing the version of WebSphere Application Server to which you want to migrate. Once built, you deploy it to your private cloud and you have a running environment in minutes.
Apply stored config and deploy updated apps: Now that you have your new environment up and running, use RAFW to apply the configuration you extracted from your old environment. RAFW inherently understands any configuration translation that needs to occur to apply the old configuration to your new environment, and it can also deploy your updated applications for you.
That's the basic overview for version-to-version migrations when you are moving to a cloud-based environment. In time, I will be posting more information about this process to shed a little more light about what is going on under the covers. In the meantime, you know how to reach me if you have questions!
One of my favorite things to do with users or potential users of WebSphere CloudBurst is to help them understand how they can construct a custom environment using the appliance. Typically, we take one of their existing application environments and discuss the configuration steps that contribute to its makeup. From there, we map the required configuration actions to different customization capabilities in the appliance. It is one thing to talk about how you can customize every layer of your application stack with WebSphere CloudBurst, it is quite another to talk about it in the context of an existing environment. This exercise usually serves to greatly enhance a user's understanding of how to construct tailored environments with the appliance.
While I cannot take every one of you through this exercise in the context of one of your own application environments, I can propose a scenario that will help to illustrate the WebSphere CloudBurst customization process. Consider that I want to deploy a clustered WebSphere Application Server environment whose application server instances utilize WebSphere DataPower XC10 for HTTP session management. In order to deploy such an environment, I would need to do the following:
Install an OS and WAS
Install the WebSphere eXtreme Scale Client binaries - required for integration
Construct a clustered cell
Augment profiles with WebSphere eXtreme Scale profile templates
Configure the application server instances to use WebSphere DataPower XC10 for session management
So those are the steps, but how do they map to WebSphere CloudBurst? First, I know that the WebSphere Application Server Hypervisor Edition image used by WebSphere CloudBurst encapsulates the installation of the OS and WAS. I also know that WebSphere CloudBurst will automatically construct the clustered cell during the deployment process. That means I need to address the installation of client binaries, augmentation of profiles, and configuration of application server instances. In order to do this, I will use a combination of image extension and custom script packages.
To get started, I extend an existing WebSphere Application Server Hypervisor Edition image and simply install the WebSphere eXtreme Scale Client binaries. I then capture that image and store it as my own unique image in the WebSphere CloudBurst catalog. Now, you may wonder why I did not capture the profile augmentation in the custom image. Remember, you cannot change profile configuration during the extend and capture process as WebSphere CloudBurst resets the profiles as part of capturing the custom image.
My custom image encapsulates the installation of the client binaries, so now I turn to custom script packages. I need two in this case. One script package will augment a profile (either deployment manager or custom node) with the WebSphere eXtreme Scale profile template. The second script package will configure application server instances to use WebSphere DataPower XC10 for HTTP session management. Once done with these script packages, I have all the assets I need to build my target environment.
Using my custom image, I build a pattern that contains the number and kind of WebSphere Application Server nodes that I want. I use the advanced options to define a WebSphere Application Server cluster ensuring its creation happens during deployment. Next, I drag and drop the profile augmentation script onto the deployment manager and custom node parts in my pattern. Finally, I drag and drop the WebSphere DataPower XC10 configuration script onto the deployment manager. The pattern is now ready to deploy!
For those of you that are visual learners like me, this demonstration provides a nice overview of exactly what I wrote about above. Check it out and let me know what you think.
The majority of my posts on this blog address using various features of WebSphere CloudBurst to build private cloud computing environments. Today though, I want to switch gears and instead of talking private cloud, let's talk public cloud. Specifically, let's take a look at the capabilities and services delivered via the IBM Smart Business Development and Test on the IBM Cloud (hereafter referred to as the IBM Cloud).
For some of you, the fact that IBM has a public cloud offering may be a little surprising. After all, if you listen to some uninformed critics you may hear that IBM only cares about private clouds for large enterprises. That is simply untrue. The IBM Cloud is an Infrastructure as a Service public cloud that delivers rapid access to services hosted on IBM infrastructure via a self-service web portal. The IBM Cloud offers multiple payment options, including usage-based billing and reserved capacity billing, and even features a cost estimator so you can confidently establish a monthly budget for your usage.
Regardless of whether you use a private or a public cloud, security should always be a chief concern. As such, IBM takes security very seriously in the IBM Public Cloud. The infrastructure that constitutes the cloud is subject to internal IBM security policies that include regular security scans and tight administrative governance. Your data and virtual machines stay in the data center to which you provisioned them, and physical security policies match those of internal IBM data centers. Additionally, you can optionally make use of the virtual private network option to isolate access to the virtual machines that you provision on the IBM Cloud. Rest assured that security in the IBM Cloud was a guiding design principle and not an afterthought.
With the basics out of the way, let's get on to the question I'm sure you have: What can I run on the IBM Cloud? To get you started, the IBM Cloud provides a nice list of public images in its catalog that are ready for you to provision. These images include WebSphere Application Server, WebSphere sMash, DB2, WebSphere Portal Server, IBM Cognos Business Intelligence, Tivoli Monitoring, Rational Build Forge, and many more. In addition to the public images provided by the IBM Cloud, you can build your own private images. Private images allow you to start with a base public image and then customize it by adjusting the configuration or installing new software. Once customized, you can store these private images on the IBM Cloud and provision them whenever needed. Whether you are using public or private images, you have a number of server configurations to choose from in order to host your environments.
While very brief, I hope this overview provides you with some of the more important details regarding the IBM Cloud. There are few, if any, service providers out there with the enterprise expertise of IBM, and I think you see that reflected in the IBM Cloud. If you are looking at public cloud options for your enterprise application environments, you should definitely take a closer look at the IBM Cloud.
I spent most of my time growing up doing two things, going to school and playing sports. I made many fond memories -- mostly from the latter :) -- and learned more than a few lessons over that time. Of all of those lessons, there was one in particular that stuck out in both the classroom and on the baseball diamond: Sometimes you have to get back to the basics.
In that vein, I think it is time to revisit the basics of WebSphere CloudBurst. In revisiting the basics, I am not talking about the technical basics of the appliance. Rather, I am talking about revisiting exactly why WebSphere CloudBurst exists in the first place. In other words, let's take a look at the problem domains WebSphere CloudBurst addresses, and let's discuss a little bit about how the appliance does so.
A couple of weeks ago, I wrote about a sample I was working on that would allow one to apply a layer of governance to their WebSphere CloudBurst patterns. Earlier this morning, I posted the sample to the WebSphere CloudBurst Samples Gallery under the 'Sample CLI Scripts for WebSphere CloudBurst' section. The name of the new sample is 'Check WebSphere CloudBurst patterns', and you can download it here.
As hinted in my earlier post, the new sample is a simple way to check your patterns against assertions you supply in a properties file. It allows you to check that patterns contain the correct parts and scripts, and it allows you to verify that they were built from valid images. The assertion format is pretty basic, but it should be flexible enough to allow you to check patterns against a wide array of requirements. The sample archive includes a readme file that explains exactly how to use the script, and it contains a sample assertions file to give you an idea of the input syntax.
I hope this helps to address some of the requirements of many WebSphere CloudBurst users that told me they were in need of a way to apply governance to their patterns. If you have any questions about the sample, please let me know. Alternatively, if you have another idea or a problem you would like to see addressed by a sample in our gallery, please let me know.
In the course of my job, I am lucky to be able to work with both enterprise users and business partners who are adopting and using the WebSphere CloudBurst Appliance. When it comes to the business partner camp, one of my absolute favorites is the Haddon Hill Group. The Haddon Hill Group is an IBM Premier Business Partner, and they have been an early adopter and vocal advocate of the WebSphere CloudBurst Appliance. They have extensive knowledge of the use of the appliance in enterprise accounts, and quite frankly, they are doing some really cool things with WebSphere CloudBurst.
Given the above, I was glad to see summarized results from their various implementations made available recently on the IBM site. The summary is fairly concise, so I encourage you to take a look at the results Haddon Hill Group is getting with WebSphere CloudBurst.
I am not going to rehash the contents of the results here, but there are a couple of things I want to call out. First off, Haddon Hill Group says that WebSphere CloudBurst can provide companies with a '100 times faster time to market' delivery experience. In a practical sense, this means reducing the amount of time to deliver WebSphere environments from 40-60 days on average to just hours. That is an eye-opening data point!
The other thing I want call out here is a quote from Phil Schaadt, President and CTO, Haddon Hill Group. I have had the pleasure of working with Phil and team, and I have heard him echo these same sentiments many times:
"The important thing about the IBM WebSphere CloudBurst Appliance is that it will dispense a WebSphere Application Server image onto your WebSphere Application Server environment or private cloud along with other products within the WebSphere stack, and that application server will be ready in a few minutes. You can do it in a clustered environment, and you can even roll out IBM WebSphere Process Server and get it right in a fully clustered environment with a database connection, in about 90 minutes. You can also easily manage all the configurations of IBM WebSphere Process Server that you need. All the steps that took up so much time and effort on the part of IT staff have been removed. The savings for companies with large WebSphere implementations can be in the millions."
It is always great to see clients putting our technology to use to produce tangible business value. Again, I encourage you to take a look at these reports. As always, I am eager to hear what you think, so leave me a comment or reach out to me on Twitter @damrhein.
I spend most of my time talking with our users about the WebSphere CloudBurst Appliance. While I believe the appliance is somewhat of a hybrid among the Infrastructure as a Service and Platform as a Service layers of the cloud, it is definitely closer to IaaS than PaaS. Users recognize that, and they can identify the capabilities of WebSphere CloudBurst that correlate with IaaS cloud functionality.
That said, I often get questions regarding IBM and work in the PaaS arena. These include questions like, 'Is IBM planning to do anything with PaaS?', 'What is your take on PaaS?', 'What kind of applications do you plan on targeting with your PaaS offering?', and more.
Well, rest assured that IBM is definitely embracing the PaaS movement. Instead of trying to answer these questions in this post though, I want to make you aware of a recent InfoQ interview with IBM WebSphere CTO, Jerry Cuomo. In the interview, Jerry answers the questions above and much more. Jerry talks about IBM's plans for PaaS, what such a platform might look like, and how he sees IBM competing against some of the cloud players in this space.
The interview runs about a half hour, but there is a very nice table of contents that allows you to navigate to specific question/answer segments with Jerry. If you are interested in PaaS, and specifically in IBM's intention in this space, I encourage you to take a look at the interview. Let me know what you think!
One of my favorite things to do is create content that you, our users, can directly use to adopt and implement our products. Luckily for me, my job allows me to spend a considerable time doing just that for our WebSphere CloudBurst Appliance. In the course of this kind of work, I use multiple different mediums to hand over what I hope is helpful content to you. This includes blogs, articles, demos, and the WebSphere CloudBurst Samples Gallery.
While I like creating content for all of these forums, if I had to pick a favorite, I'm going to go with the samples gallery every time. The reason for this is simple. Users can download and directly use the content in the samples gallery. The samples gallery plays host to script packages, CLI scripts, and other tools that are ready to use with WebSphere CloudBurst (of course, one can also extend these or simply use them as reference). Further, the samples in the gallery are mostly direct responses to suggestions or requests I get from users regarding this type of content, thus increasing its usefulness and relevance.
A good example of the kinds of assets in the gallery is the latest script package I put out there. Recently, I was talking to a user and asked, 'What do you do every single time you establish a WebSphere Application Server environment?' He outlined a few different tasks, one of those being the creation of virtual hosts in the server's configuration. The creation of virtual hosts piqued my interest because many users do that, and the configuration logic itself is fairly consistent regardless of the administrator doing the task. Therefore, I set about creating a sample script package that you can use to create virtual host configuration in WebSphere Application Server.
The script package does two things. It creates virtual host entries, and it configures host aliases for these entries. The script allows the user to supply the data for the entries and aliases they want to create via a properties file. The properties file is pretty basic and allows for the configuration of multiple host aliases for each virtual host entry. Here is an example properties file:
The script package parses the data from a properties file like the one above, and it creates the appropriate WebSphere Application Server configuration. If you are using WebSphere CloudBurst and this kind of configuration task is common for your deployments, you may want to download this free sample. I also want to point out that there are quite a few more samples that are completely free for you to download in the gallery. Check them out and let me know what you would like to see in the samples gallery!
Looking for a reminder of the difference a year can make? If so, just take a look at the last year or so for the WebSphere CloudBurst product. Since about this time last year, we have seen the release of versions 1.1, 1.1.1, 2.0, and 126.96.36.199, each one bringing their own set of major enhancements and features. Owing to this aggressive pace, it is sometimes easy to miss out on the latest capabilities of the product. For that reason, I wanted to give a brief rundown of some (definitely not all) of the major additions to WebSphere CloudBurst over the past year.
PowerVM and z/VM support: WebSphere CloudBurst 1.1 introduced support for PowerVM (based on Power5 and Power6 systems), and version 1.1.1 introduced support for z/VM. This means that a single WebSphere CloudBurst Appliance can provision to VMware, PowerVM, and z/VM virtualization platforms.
Power7 support: WebSphere CloudBurst 188.8.131.52 introduced support for Power7 systems, thus allowing users to take advantage of the significant enhancements provided by Power7 via WebSphere CloudBurst deployments.
Expansion of the IBM Hypervisor Edition portfolio: The portfolio of images that you can deploy using WebSphere CloudBurst now includes WebSphere Application Server, WebSphere Process Server, WebSphere Portal Server, WebSphere Business Monitor, WebSphere Message Broker, and DB2. In addition to adding new images, we also expanded the platform and operating system support for existing images. For example, you can take advantage of the Red Hat Enterprise Linux OS for WebSphere Application Server Hypervisor Edition, and you can deploy WebSphere Process Server Hypervisor Edition to z/VM infrastructure.
Addition of the Intelligent Management Pack: The Intelligent Management Pack is an optional feature of the WebSphere Application Server Hypervisor Edition that allows you to take advantage of autonomic, policy-driven runtime management capabilities in your deployed environments. This includes the ability to create proactive health policies for your environments, assign SLAs to your applications, manage the update of applications, and more.
License management capabilities: In WebSphere CloudBurst version 2.0 and later, you can make use of license monitoring and management functionality. This allows you to get both point-in-time and historical views of software PVU usage within your cloud, and it allows you to setup policies concerning the usage of PVUs for WebSphere CloudBurst deployments.
Environment profiles: WebSphere CloudBurst provides quite a bit of out-of-the-box deployment automation in terms of selecting hypervisors, assigning IP addresses, and more. However, sometimes you need more control over exactly how this happens. WebSphere CloudBurst 184.108.40.206 introduced environment profiles that you can use to exercise more control over how deployment happens in WebSphere CloudBurst.
In my view, this is quite an impressive list of features delivered within a year's time. I should also reiterate that this is by no means a complete list, but just a selection of some of the major enhancements during this time. If you have any questions about the above additions, or if you have any questions on other features, please let me know.
Usually when I am discussing WebSphere CloudBurst with clients, the subject of tracking usage comes up. While 'tracking usage' is pretty broad and could apply to any number of things, we often come back to two major concepts. First, users want to be able to track compute resource usage in the WebSphere CloudBurst cloud, as this helps in cloud capacity planning. Second, users want to be able to track usage by individual WebSphere CloudBurst users in order to facilitate chargeback. In both cases, WebSphere CloudBurst provides reports that help you.
When it comes to tracking compute resource usage in your WebSphere CloudBurst cloud, the appliance provides a set of pre-defined reports on the Cloud --> Machine Activity page.
As you can see from the snapshot above, WebSphere CloudBurst provides usage reports for both memory and CPU attributed to either individual hypervisors or virtual machines. In addition, the appliance tracks storage usage by device and IP usage in your cloud. For each report type, you can specify a desired date range and let WebSphere CloudBurst produce a graph showing usage over that time. The below picture shows the report for memory usage by hypervisor over a one month period.
Tracking compute resource usage is certainly important, but if your interests are mostly about using WebSphere CloudBurst to facilitate chargeback, you likely want to know about our user reports. You can find these reports on the Cloud --> User Activity page of the appliance. On this page, you will find a table that lists each user and their usage of virtual machines, CPUs, memory, and storage over a period of time that you specify. Further, you can download a comma separated value file that contains this data for further parsing or processing on your part. The image below shows an example of the user activity table.
In addition to the user usage data provided above, many WebSphere CloudBurst users find that they want to track the amount of time users had running virtual systems deployed through WebSphere CloudBurst. While the appliance does not provide a direct report with this information, you can use this free sample to calculate virtual system duration times. This free tool uses data available in the WebSphere CloudBurst audit log (data you can process to produce any custom report you need), and it calculates virtual system duration time as well as virtual system time attributed to each user. You use the WebSphere CloudBurst CLI to invoke this tool, providing it with your start and end dates for the calculation (you can find further invocation instructions inside the ZIP file containing the tool). The image below shows example output for both the virtual system duration and user virtual system time reports.
'Tracking usage' means many different things to different people and use cases. I hope the above information regarding usage tracking in WebSphere CloudBurst gives you a good idea of what you get out of the box, as well as what you can do by using the audit log (in a similar fashion to the free tool mentioned above). If you have any questions, requests, or feedback, please let me know.
Virtual image parts play a huge role in WebSphere CloudBurst. When crafting your own customized patterns, you include anywhere from 1 to n parts from as many different virtual images as is necessary. These parts represent the different node types or personalities within a given Hypervisor Edition image, and form the basis of your pattern. When you deploy a pattern, such as the one pictured below, WebSphere CloudBurst creates a distinct virtual machine for each part.
This means that after deploying the above WebSphere Application Server pattern, you will have four virtual machines comprising your virtual system. This gives you a clean separation of concern by providing a unique container for each of your application environment nodes. This can attribute to performance optimization, increased availability, and much more. However, this approach is not suitable to all use cases. In some scenarios, especially when trying to control costs and increase consolidation, you may want to deploy a multi-node WebSphere Application Server environment within a single virtual machine. Based on what I showed you above, you might think our approach in WebSphere CloudBurst makes this impossible, but you would be overlooking an important component of patterns.
That component is of course the second building block of patterns... script packages. As you probably know, script packages allow you to supply just about any customization you want. In the case that you want a single virtual machine to host a number of WebSphere Application Server nodes, maybe even an entire cell, all you need to do is supply a script package that constructs the necessary nodes during deployment. In fact, you don't even have to write the script package. You can use the free sample in our samples gallery. As seen in the pattern below, you include this script package on a sole deployment manager part in a pattern.
The script script package provides parameters that define the node name, number of custom nodes, and number of web server nodes you want in your cell. During the deployment process, the script takes this information and constructs the cell you define. This includes creating the custom and web servers nodes and federating the custom nodes, thus completing the creation of your WebSphere Application Server cell. In this case, the script package provides deployment flexibility that is sometimes a necessity, and it is just another example of the many degrees of flexibility enabled by the script package design.
I should point out that a part in a pattern does not always map to a single node. For instance, in the case of WebSphere Process Server, there is a part that represents a complete, multi-node golden topology encapsulated within a single virtual machine. However, if you find yourself using images that do not contain these multi-node parts, rest easy knowing script packages provide you the flexibility you need.
In my last post, I concentrated on the new enhancements to WebSphere CloudBurst 220.127.116.11. One of the major new additions was the introduction of Environment Profiles, and I promised a developerWorks article would be forthcoming. The article is now live along with a demo that showcases the capability of environment profiles.
As I mentioned in my last post, environment profiles center around giving you more customization capability during the pattern deployment process. In WebSphere CloudBurst, the pattern deployment process consists of the five main steps depicted below.
Traditionally, WebSphere CloudBurst controlled the entire deployment process, thus closing it off to the deployer. Environment profiles extend the customization reach of users to be able to effect steps 1-3 in the above diagram. Specifically, environment profiles give you the following control:
Control over the assignment of IP addresses and hostnames to pattern parts: Instead of having WebSphere CloudBurst automatically assign IP addresses, and thus hostnames, to virtual machines during deployment, you can explicitly set both values during the deployment process.
Ability to deploy single patterns to multiple cloud groups: Previously, when deploying a pattern you selected a single cloud group and WebSphere CloudBurst deployed all the parts in the pattern to machines within that cloud group. While this may be okay for many cases, other cases may require you to deploy some parts of the pattern to one group of machines while other parts map to a separate set of machines. Before environment profiles, you could accomplish this with multiple patterns. With environment profiles, you can accomplish it with a single pattern.
Ability to supply virtual machine naming standards: As part of deploying a pattern, WebSphere CloudBurst creates one to many virtual machines with distinct names. Environment profiles allow you to supply a naming standard that WebSphere CloudBurst will use when creating the machines as opposed to default naming schemes previously used.
It is important to note that the use of environment profiles is completely optional, and you can continue to use the traditional deployment process, thereby leaving WebSphere CloudBurst in control. That said, the introduction of environment profiles is a direct response to consistent user feedback we received regarding the need for more control during the deployment process. Based on my user conversations, these profiles address many of said needs in an easy to use, straightforward manner. We are, of course, eager to know what you think. As always, you can let me know right here, through email, or on Twitter (@damrhein).
In keeping with the impressive release pace, WebSphere CloudBurst 18.104.22.168 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 22.214.171.124, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 126.96.36.199 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 188.8.131.52, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 184.108.40.206, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
I write a lot about WebSphere CloudBurst script packages. Typically, I write about what they are, how to create them, and even provide some samples from time to time. I find that most of the time I'm either writing or talking about script packages from the standpoint that they allow you to automate the delivery of customizations to environments you deploy with WebSphere CloudBurst. More specifically, I usually explain how you can include these script packages in your patterns to ensure that your custom scripts execute as part of every pattern deployment. The truth is, that is not the whole story. In fact, it's only 1/3 of the story.
In WebSphere CloudBurst, when you define a script package you also define its execution mode. The execution mode can be one of three values, and it indicates the invocation time for the script. The default value is at virtual system creation, and that tells WebSphere CloudBurst to automatically invoke the script as part of the deployment process. This seems to be the most commonly used execution mode, and in the original version of WebSphere CloudBurst it was the only available mode (which probably attributes to why I only usually tell 1/3 of the story here). As you may expect, there is a wide range of usage scenarios for this class of script packages including installing applications, activating monitoring agents, registering cells with an externally managed DNS server, and much more.
If you are like me (and many humans), you enjoy and actually expect symmetry. In that regard, it probably comes as no surprise that there is a script package execution mode called at virtual system deletion. As the name indicates, this class of script packages executes as an automatic part of the virtual system deletion process. When a user tells WebSphere CloudBurst to remove a virtual system, before it shuts down the machines in the system, it will run each script package marked to execute at virtual system deletion. Typical use cases for these scripts include removing information about the cell from externally managed DNS servers, freeing up connections with external systems, and other external 'clean up' activities.
So this leaves the final execution mode for script packages, the when I initiate it mode to be precise. This class of script packages executes when explicitly triggered by a user. In the virtual machine detail section for a deployed virtual system, you can see a list of user-initiated script packages for a given machine. There is a start button by each of the user-initiated script packages that allows you to invoke the script when, and as many times as you need to. While these script packages have many different use cases, the most common use case is to deploy application updates. Users build these application update scripts, attach them to a pattern, and invoke them whenever they want to deliver an updated application into their already deployed environment.
WebSphere CloudBurst script packages are one of the main vehicles for delivering your customizations to your cloud environments. The three execution modes mentioned above allow you to determine when the right time to deliver those customizations is.