Starting in WebSphere CloudBurst 2.0, there are different levels of elasticity that you can achieve in your WebSphere deployments. As I mentioned in a previous post, the Intelligent Management Pack allows you to define dynamic clusters. This means cluster membership and the number of instances of a given application adjusts on the fly to meet SLAs for your application. This enables a more dynamic environment as opposed to static cluster definitions, but there is a layer of elasticity below this that bears exploring.
Dynamic clusters work with WebSphere nodes that already exists. Users define the nodes available for use by a dynamic cluster, and the runtime uses SLAs and current system state to determine the actual nodes used and application instances started. So, what if you need more nodes than what you currently have in a given WebSphere environment? A dynamic cluster will not create a new node, so you have to define extra nodes. Starting in WebSphere CloudBurst 2.0, this is as easy as pushing a button.
Dynamic virtual machine operations allow you to add and remove nodes on the fly for a given virtual system. For instance, take the pattern in the picture below:
If you were to deploy this pattern, you would end up with a WebSphere Application Server cell with a node makeup similar to the below:
Now that the environment is out there (in mere minutes I should mention), suppose you want to add more nodes? Before WebSphere CloudBurst 2.0, you could have done it, but it would involve creating another pattern with a custom node part and deploying it. This results in two different virtual systems and complicates the maintenance stream. Now, in WebSphere CloudBurst 2.0, you can simply click a button to add a node to the existing virtual system.
From the virtual systems view, if you expand the virtual machines, by each virtual machine you will see an Actions column with a View link. If you want to add a node to the environment shown above, you simply click the View link, and then click the clone icon highlighted in green below:
WebSphere CloudBurst prompts you for the number of nodes to add. You make the selection and then click OK. The appliance creates the new node and federates it into the cell for you. For instance, if you chose to add a single node, at the end of the clone not only would you have another virtual machine in your virtual system, but also another node automatically federated into your WebSphere Application Server cell:
On the flip side, you can remove a node by clicking the delete icon in the same dialog as the clone icon above. This removes the node from the WebSphere Application Server cell and deletes the virtual machine.
The ability to easily add and remove virtual machines from your WebSphere CloudBurst virtual systems enables a very valuable level of elasticity. Now you can very easily add and remove nodes on the fly based on the current demands of your system. As always, let me know if you have any questions or comments.
When writing a new tool for the WebSphere CloudBurst samples gallery last week, I got the chance to use an API in the CLI that was new to me. Specifically, I got a chance to use the WebSphere CloudBurst CLI in order to retrieve an audit log from the appliance for a specified date period. In case this is new and interesting to you, I thought I would share what I found.
First off, let's take a look at the API I am talking about. It's pretty simple: cloudburst.audit.get(file, start, end). Here, start is the start date for the audit entries and (naturally) end is the end date for those entries. The file parameter simply denotes the location or file object you want to use to store the audit archive retrieved via the get method.
This is a simple enough API. The only wrinkle comes in dealing with calculating the start and end dates. According to the WebSphere CloudBurst Information Center, both the start and end times are 'specified as the number of seconds since midnight, January 1, 1970 UTC. Floating point values can be specified to indicate fractional seconds.' For my use case, I wanted to let a user or calling program pass the start and end times as arguments to the CLI script that retrieves the audit archive. Check out the relevant portion of my script below:
As you can see, the script takes in the start and end time in the MM/dd/yy HH:mm format (i.e. 05/20/10 15:30). It parses the value to produce a date, gets the long value of the date (which is in milliseconds according to the java.util.Date API), and divides that value by 1000. This is to account for the fact that the cloudburst.audit.get method expects you to express the start and end times in seconds. The script passes the converted dates along with the output file location to the get method. The result is a ZIP file that contains an appliance audit, license audit, and PVU audit file for the specified date range.
One of my favorite things about the WebSphere CloudBurst CLI is that it is Jython-based. This means I can leverage Java APIs from my CLI scripts, and that is huge for me because of my existing knowledge of the Java language. You certainly can substitute Python APIs for my use of Java APIs to handle the start and end date calculation. I hope this is helpful, and good luck with the WebSphere CloudBurst CLI!
Since the IMPACT conference, there has been quite a bit of buzz around the new features, capabilities, and enhancements coming in WebSphere CloudBurst 2.0. In addition to the updates for the appliance, there are some updates to the IBM Hypervisor Edition virtual images as well. In particular, there is one new offering that I want to make sure is getting more than a mere 15 minutes of fame.
What is this new offering that deserves some time in the spotlight? Well, it is the Intelligent Management Pack for the WebSphere Application Server Hypervisor Edition. Still not sure what this is? Simply put, it is an optional add-on to the WebSphere Application Server Hypervisor Edition that enables WebSphere Virtual Enterprise capabilities in the environments dispensed by WebSphere CloudBurst.
If you are not familiar with WebSphere Virtual Enterprise, this still may not mean much yet. Essentially, the use of the Intelligent Management Pack means you create environments that contain capabilities to dynamically manage your application runtime environment. This includes, but is not limited to, the following capabilities:
Dynamic clustering: Create WebSphere Application Server clusters whose membership changes autonomically in order to meet the needs of your applications. You create service level agreements to define the needs for your applications.
Application health monitoring: Monitor the health of your applications by assigning health policies. These policies designate the condition to monitor for (i.e. memory leaks), and they dictate what action to take in case the condition occurs (i.e. restart the server).
Application editioning: Manage multiple versions of your applications and roll out new versions of your applications without incurring downtime. This is essential if you consistently deliver updates to your applications deployed in production environments.
On-Demand routing: Build WebSphere CloudBurst patterns that include On-Demand Router parts. On-Demand Routers are a key component of WebSphere Virtual Enterprise environments and act as an enabler of some of the functionality discussed above.
If you are a user of WebSphere Virtual Enterprise, or otherwise knowledgeable with the product, the Intelligent Management Pack should be pretty familiar to you. When you deploy a pattern built from WebSphere Application Server Hypervisor Edition with the Intelligent Management Pack, you end up with a WebSphere Virtual Enterprise cell. When you log into the administration console, you will see the WebSphere Virtual Enterprise console. You can use any of the features in the normal WebSphere Virtual Enterprise product in the environment created by WebSphere CloudBurst.
Be on the lookout for more information concerning the Intelligent Management Pack. I know there is an article in the works, and we will also be working on some short demos for our YouTube channel. In the meantime, please reach out to me here or on Twitter (@damrhein) with any questions or comments.
If you frequently find yourself setting up and tearing down application environments that run on offerings from the WebSphere portfolio (like WebSphere Application Server or WebSphere Process Server), I have little doubt that you see the benefit of WebSphere CloudBurst. The appliance allows you to setup these environments with unprecedented speed and extreme simplicity. In fact, WebSphere CloudBurst makes it so simple and fast to setup these environments, it would be surprising if you did not spin up more WebSphere application environments with WebSphere CloudBurst than you did before your adoption of the appliance. Soon, you will find yourself faced with another challenge: that of managing and governing an increasingly growing ecosystem of your application environments.
From the beginning, WebSphere CloudBurst focused on the complete lifecycle for WebSphere application environments in an on-premise cloud. Therefore, in addition to easily creating and deploying these environments, the appliance delivers many features that help you manage and govern the dispensed virtual systems. This includes capabilities such as usage monitoring, fix and upgrade application, and virtual system state management. In the recently announced WebSphere CloudBurst 2.0, management capabilities go a step further, and now you can manage software license usage for your on-premise cloud.
What does it mean to be able to manage your software licenses? Well, in the new version of the appliance (firmware released planned for June 18th), as you dispense environments, WebSphere CloudBurst will keep track of the PVUs you are consuming for the particular IBM software you are instantiating. In doing this, it accounts for the physical machine architecture on which the supporting hypervisor sits, and it takes into account the IBM subcapacity/virtualization licensing policy. This means you can get an accurate view of your PVU usage at any point, and the appliance can produce a highwater mark report for any product over a date period you specify. This is license counting made easy!
In addition to simply tracking your PVU usage, you can optionally configure enforcement behavior. Enforcement behavior tells the appliance what to do when you exceed your PVU threshold for a particular product. You have three basic options: Ignore, Warn, Enforce. In Ignore mode, nothing happens when you exceed your PVU entitlement for a given product. Deployments that use those products continue to deploy as usual. In Warn mode, deployments for products for which you have exceeded your PVU entitlement continue as usual, but appliance administrators receive an email warning them of the situation. Lastly, in Enforce mode deployments that will put you over your PVU threshold for a given product simply fail. This prevents you or deployers using your appliance from overstepping your entitlement.
The software license management features in WebSphere CloudBurst 2.0 really add to the overall management capabilities of the appliance. I want to be sure to reiterate that the configuration of enforcement behavior, specifically the Warn and Enforce modes, is optional. It is not required from IBM. The software license management capabilities delivered in WebSphere CloudBurst 2.0 are purely meant to enhance your capability to manage and govern environments in your on-premise cloud. If you are interested in seeing this in action, check out this short video.
During the week of IMPACT this year, we announced the launch of the WebSphere CloudBurst Samples Gallery. You can go to this gallery to find and download sample script packages, CLI scripts, and other tools that we hope help you in your endeavors with the appliance. The samples are free to use and offered in an "as-is" fashion.
While I certainly will not write about each and every sample we post out there, I did want to bring your awareness to a new one I just put up today. The new sample is neither a CLI script nor a script package, though you will find it in the script packages section of the gallery. Instead, the new sample is a tool that you can run to produce WebSphere CloudBurst script packages.
Specifically, the tool runs against a target WebSphere cell to produce a WebSphere CloudBurst script package that encapsulates that cell's configuration. The tool works by running the backupConfig command against the target cell. It packages the ZIP file that results from running the command into a special WebSphere CloudBurst script package that you can include in patterns which match the source cell in node quantity and type.
The script package produced by the tool packages logic to run the restoreConfig command using the backed up configuration from the source cell. This will apply the source configuration to a new WebSphere Application Server cell created as the result of deploying a pattern. In addition, the script package contains logic to handle the possibility of changing cell, node, and host names in the target environment.
The tool’s purpose is to help you accelerate the process of importing your existing WebSphere Application Server environments into the appliance as patterns (which is a problem I believe many of you would like to solve). It certainly does not handle everything you need to do to import environments. In fact, it has the same limitations as the backupConfig/restoreConfig utilities in WebSphere Application Server. However, I do believe that it makes it a little easier to start moving your existing environments into the appliance as new WebSphere CloudBurst patterns.
Check out this video to see a quick overview of the tool, and then go download it for free from the samples gallery. The ZIP file that you download has a readme file that gives specific detail about how to use this sample tool. As always, please let me know if you have any questions or feedback.
It's been a busy few weeks full of customer visits ranging from the east coast to the west coast. Other than an extremely off kilter body clock, the trips have been great. It is so exciting to see the high level of interest in the newest release of WebSphere CloudBurst, version 2.0.
On the topic of WebSphere CloudBurst 2.0, I want to make sure our IBM Business Partners (and my IBM colleagues) are aware of a couple of upcoming Tech Talks. These Tech Talks are given by the IBM labs and provide an early look into some of our newest offerings. On the Tech Talk docket this month are WebSphere CloudBurst 2.0 and the new WebSphere DataPower XC10 Appliance. Business partners can sign up for the WebSphere CloudBurst talk here, and the WebSphere DataPower XC10 Appliance here (IBMers get in touch with me for the links).
I feel pretty certain that if you are reading this, you probably are pretty familiar with WebSphere CloudBurst, but maybe not as much so with WebSphere DataPower XC10. This is a new offering from IBM that provides in-memory data caching capabilities (similar to those of WebSphere eXtreme Scale) in the form factor of an appliance. Data grids and caches are really a hot wave in application design and development, and chances are if you are developing applications for distributed systems today, you could benefit from the use of in-memory data caching. Check out the Tech Talk for more information.
While these Tech Talks are restricted for IBM Business Partners and IBMers, I'm always available if you have any questions about WebSphere CloudBurst, WebSphere DataPower XC10, or any of our WebSphere offerings. I'll do my best to answer your questions or put you in touch with the right IBMers in the lab. Feel free to reach out and get in touch at any time.