Lately, I have run into multiple situations where an IBM Workload Deployer user has been trying to decide exactly how they want to create their customized images for the cloud. Essentially, they have been trying to decide whether to use the native extend and capture capabilities of IBM Workload Deployer, or to pursue the use of the Image Construction and Composition Tool (also included with the appliance). The conversations have been interesting and challenging, but more importantly, they have been a reminder that constructing enterprise-ready environments for the cloud does not happen by magic. It takes thought, deliberate planning, sustainable design, and the tools to carry everything out.
The tools part we have covered. I have every confidence, bolstered by user experience after user experience, that IBM Workload Deployer and associated tools (like the Image Construction and Composition Tool) equip you to build highly customized, cloud-based application environments. In this post, I want to focus in on the thought process that goes into how you decide to build your customized environment. Specifically, I would like to talk about important points to consider as you try to understand whether to use the native extend and capture capabilities of IBM Workload Deployer or the Image Construction and Composition Tool.
To be clear from the outset, I am not trying to provide a decision flowchart in this post. For all intents and purposes, that would be next to impossible. Instead, I want to pose to you some important questions that you should ask of yourself, along with the reasons why I believe those queries to be important. Keeping in mind that this is not an all-inclusive list, here it goes:
Question: Are the customizations that you want to make congruent with an IBM-supplied image?
Reason: One of the first decisions you should make is whether or not you can start with an IBM-supplied image as the base for your customization. You need to know what middleware elements (type and version) make up your environment and what operating system should host that environment (version and distribution). You can match that information against the list of content that IBM supplies. If there is a match, you should start by looking at extend and capture to customize that image to meet your needs. If there is no direct match, you may be looking at the Image Construction and Composition Tool.
Question: Does your custom content supplement middleware content supplied in an IBM image?
Reason: If you simply need to add additional components that supplement software already in an IBM image, I believe it is best to first examine the use of extend and capture. Whether these components are IBM software or not is irrelevant as the extend and capture functionality does not care.
Question: How configurable do you want to make the custom content in your image?
Reason: If you are adding content into the image, you need to think about just how configurable you need it to be. When you use extend and capture, you add the content to an existing image in a manner that pretty well ends up being opaque to IBM Workload Deployer. To configure that content, you need to have script packages and make sure they are part of every pattern you create based on the image. Alternatively, if you use the Image Construction and Composition Tool, you can embed configuration behavior in the image's activation engine, and you can expose deploy-time parameters without needing to include script packages in every single pattern. As an example, if you need to add a monitoring agent into your environment, you would likely do this via extend and capture and end up with a pretty simple script package to configure that agent during deployment. If however, you need to create an image with a custom database, you would likely favor the Image Construction and Composition Tool as you could embed common deploy-time configuration parameters directly in the image. For a database, there are likely to be many more deploy-time configuration parameters that you want to expose as compared to a more simple monitoring agent.
Question: Is your main focus on making operating system changes?
Reason:If your primary focus is on making operating system changes AND the answer to the first question is that your target content aligns well with IBM-supplied images, then extend and capture is where you want to start. Of course, you need to make sure that you can make all necessary changes to the OS with extend and capture, but I will say that this capability is not very restrictive at all.
Admittedly, this is a short list, but I believe it is a good starting point for how you decide upon one approach versus the other. Also, I would be remiss not to point out that these tools are absolutely not mutually exclusive. Many users I work with use a combination of the two approaches. In fact, there are some use cases that call for both tools. Start by creating a completely custom image in the Image Construction and Composition Tool, and then subject that image to the extend and capture process in IBM Workload Deployer to customize it for a particular purpose, team, project, etc. I hope you find this helpful, and I welcome your feedback or thoughts!
Maybe you remember, but not long ago I wrote a post about scenarios when WebSphere CloudBurst and Rational Automation Framework for WebSphere (RAFW) combine to form quite the pair. You can read that post for details, but the basic scenarios were configuring and capturing, importing existing environments into WebSphere CloudBurst, and migrating from virtual to physical installations. Well, after talking with customers and colleagues lately, you can add another scenario to the list: version-to-version WebSphere Application Server migrations.
I want to be clear here about one thing before I go further. I am in no way advocating against the use of the migration tooling that ships with WebSphere Application Server. It is an excellent tool that can make migrations simple and fast. I am merely pointing out that when it comes to version-to-version migrations you have options, and you should survey them all before making a decision.
With that understanding, let's take a look at WebSphere CloudBurst and RAFW in the context of a version-to-version migration. This integrated approach to migration is ideal if you are amenable to moving up to a newer version of WebSphere Application Server in a cloud-based environment. Using both products makes migrations fast and easy, and you can be very confident that the configuration of the migrated environment is faithful to the original. The figure below shows the basic flow of the migration and breaks it down into a set of discrete steps.
Now, for a quick break down of each step:
Extract config & apps from old environment: The first step involves pointing RAFW at your existing configuration, the one you want to migrate from, and using an out-of-the-box action to import all of the configuration into a RAFW environment. You can also import your application binaries in this step.
Store config & apps from old environment: In step two, you will store the extracted configuration and application binaries in a source control repository or some backup location separate from your RAFW server. This is an optional, but recommended step.
Analyze and update apps: Before migrating your applications to the newer version of WebSphere Application Server, you can use the completely free Application Migration Toolkit to analyze the source code of your applications. This toolkit will recommend any required updates to ensure your application continues to behave as expected when moving to the new version. Again, this is an optional step, but the toolkit is free and very handy. So, why not?
Deploy new version of the environment: Step four starts by building a new WebSphere CloudBurst pattern. This new pattern matches the topology of the environment you are migrating from, and you build it from an image containing the version of WebSphere Application Server to which you want to migrate. Once built, you deploy it to your private cloud and you have a running environment in minutes.
Apply stored config and deploy updated apps: Now that you have your new environment up and running, use RAFW to apply the configuration you extracted from your old environment. RAFW inherently understands any configuration translation that needs to occur to apply the old configuration to your new environment, and it can also deploy your updated applications for you.
That's the basic overview for version-to-version migrations when you are moving to a cloud-based environment. In time, I will be posting more information about this process to shed a little more light about what is going on under the covers. In the meantime, you know how to reach me if you have questions!
One of the most powerful features of WebSphere CloudBurst is the ability to take one of the WebSphere Application Server Hypervisor Edition virtual images that are shipped with the appliance and extend it to a produce a custom virtual image. This allows users to begin creating customized environments from the bottom up, starting with the operating system. To put it in better context, let's take a look at a couple of scenarios where this feature comes in quite handy.
First off, a very common need for our customers is the ability to continually monitor their application environments. For instance, you may install Tivoli monitoring agents on all of your machines hosting WebSphere Application Server processes and configure those agents to report back to a management server. This is a great case for image extension in WebSphere CloudBurst.
In this scenario, you would start by extending an existing WebSphere Application Server Hypervisor Edition image. WebSphere CloudBurst creates a running virtual machine based off of the selected image, and you log into that virtual machine and install the Tivoli monitoring agents. Once the installation is done, you capture the virtual image back into the WebSphere CloudBurst catalog and use the new image to build a custom pattern. The last step is to include a script package on this custom pattern that, upon deployment, will configure the installed monitoring agents to report back to your desired management server.
Another use case is likely to be of interest to you if you are using WebSphere Virtual Enterprise (or something similar), and you could benefit from the same ease of provisioning for those environments that WebSphere CloudBurst brings to WebSphere Application Server environments. You can use the same customization combination above (image extension and custom scripts) to enable WebSphere CloudBurst to essentially dispense WebSphere Virtual Enterprise cells.
Again, this scenario starts off by extending a WebSphere Application Server Hypervisor Edition virtual image. Once the virtual machine for the extension is created by WebSphere CloudBurst, you log in and install the WebSphere Virtual Enterprise product. After the installation is done, you capture the image and store it in the catalog. Next, you build a custom pattern based off of this image and include script packages that, upon deployment, augment the various parts in the pattern from WebSphere Application Server profiles to WebSphere Virtual Enterprise profiles. (You may wonder why you wouldn't just create the WebSphere Virtual Enterprise profiles during the image extension process. This is because during image extension, you cannot make changes to the virtual disk that contains the WebSphere Application Server profiles. Any changes made to the profiles will be wiped out during the capture process.)
There are countless more scenarios for creating custom virtual images in WebSphere CloudBurst. To name a few, you may want to install JDBC drivers that are common to almost all of your application environments, install required anti-virus software, or just make operating system configuration changes. All of these things can be accomplished through the image extension and capture process. Look for an article coming out soon that will discuss and explain, in much greater detail than I provided here, the process of installing and configuring Tivoli monitoring agents in environments dispensed by WebSphere CloudBurst. In the meantime, if you have any questions or comments, drop us a line here or check out our forum.
In my opinion, declarative deployment models are key to the entire notion of Platform as a Service (PaaS). That is, users should concern themselves with what they want, but not necessarily how to get it. The PaaS system should be able to interpret imperatives from the user and automatically convert that to a running system. In this respect, I think the new virtual application pattern, and more specifically policies, in IBM Workload Deployer takes a giant leap toward a more declarative deployment model.
In IBM Workload Deployer, policies allow you to 'decorate' your virtual application pattern with functional and non-functional requirements. In other words, they provide a vehicle for you to tell the system what qualities of service you expect for your application environment. To put a little context around this discussion, let's examine the policies available in the virtual application pattern for web applications. Specifically, let's look at the four policy types you can attach to Enterprise Application, Web Application, and OSGI Application components in this pattern:
Scaling policy: When it comes to cloud, the first thing many folks think about is autonomic elasticity. Applications should scale up and down based on criteria defined by the user. Well, that is exactly what the scaling policy lets you do. You simply attach this policy to your application component, and then specify properties that define when to scale. First, you choose a scaling trigger from a list that includes application response time, CPU usage, JDBC connection wait time, and JDBC connection pool usage. After choosing your trigger, you decide the minimum and maximum number of application instances for your deployment, and then you choose the minimum number of seconds to wait for an add or remove action. At this point, you can deploy your application and IBM Workload Deployer will monitor the environment, automatically triggering scaling actions as needed.
JVM policy: I would be willing to bet that nearly all of you tune the JVM environment into which you deploy your applications. The JVM policy allows you to take two common tuning actions, setting the JVM heap sizes and passing in JVM arguments, as well as attach a debugger to the Java process (especially useful in development and test phases). You can also use the policy to enable verbose garbage collection (invaluable to understanding heap usage patterns for your application) and select the bit level (from 32 or 64) for your application. Again, all you have to do is attach the policy and specify the properties. IBM Workload Deployer will take care of the required configuration updates.
Routing policy: The routing policy provides a simple way to specify virtual hostnames and allowable protocols (HTTP or HTTPS) for your application. Attach the policy, provide the virtual hostname you want to use, select the desired protocols, and that's it! Remember, once you set the virtual hostname you will need to update your name server to map the hostname to the appropriate IP address.
Log policy: During the development and test phase, it is likely that you will want to enable certain trace strings in the application runtime. The log policy allows you to provide trace strings for your application, and it makes sure that the appropriate configuration updates occur in the deployed environment.
While this is not an exhaustive explanation of each of the policies above, I hope it gives you a basic idea of what they are and how to use them. To me, declarative deployment models are going to be a crucial part of making PaaS successful, so I am really excited about the notion of policies in IBM Workload Deployer. What do you think?
Cloud Computing is essentially a Systems Management innovation. I understand that, to some, that means simply managing hardware and capacity or computing power. However, it also involves deployment of enterprise level software. While some software is a kind of out-of-the-box asset that can be installed generically as if it were a hard asset, infrastructure software like WebSphere requires considerable skill and knowledge.
Tier1 cloud computing implementations must be able to expand the enterprise into provided capacity quickly and autonomically. If the scale-out requires tremendous effort and specialized skills then the cost savings that cloud offers is severely mitigated.
CloudBurst provides a mechanism to quickly deploy WebSphere environments to private clouds and allows the administrator to simply manage the assets on which WebSphere will run. The expertise of setting up and configuring WebSphere is, in effect, canned. This allows for much more rapid deployments and reduces the need for more expensive admins.
While many companies are still putting forward more technologically sophisticated offerings that still require even more technologically sophisticated staff, WebSphere has produced a product with a value which is more easily realized, understood and which can be seen on the balance sheet.
I'm out at the RSA conference in San Francisco this week, and I'm expecting a lot of good conversations about WebSphere CloudBurst and security. This topic always comes up when I'm out and talking to customers, and I approach it from a few different angles.
First of all, WebSphere CloudBurst enables the creation of on-premise clouds (clouds in your data center). This means that you retain control over the resources that make up and support your cloud, and you have the ability to very tightly secure said resources. Notice that I say "you have the ability". I'm careful to point out that on-premise clouds do not inherently make your environment secure. If you don't already have a robust security strategy in place within your enterprise, then simply moving to a cloud model will not solve much. That being said, if you do have a comprehensive security strategy in place, one built around customized processes and access rights, then on-premise clouds are likely to make much more sense for you.
Moving beyond the opportunity for customized security controls provided by on-premise clouds, WebSphere CloudBurst delivers additional, unique security features. It starts on the outside with the tamper-resistant physical casing. If a malicious user attempts to remove the casing to get to the inner contents, the appliance is put into a dormant state, and it must be sent to IBM to be reset. "So what!" you say. If the user removes the casing and gets to the contents, couldn't they simply read the contents off the flash memory or hard disks directly, or insert them into another WebSphere CloudBurst Appliance and read them from there? Nope. All of the contents stored on the appliance's flash memory and hard disks are encrypted with a private key that cannot be changed and is unique to each and every appliance.
If you are at all familiar with WebSphere CloudBurst, you know that the appliance dispenses and monitors virtual systems running on a collection of hypervisors. Obviously then, the appliance must remotely communicate with the hypervisors. In order to secure this communication, all information between WebSphere CloudBurst and the hypervisors (and vice versa) is encrypted. This encryption is achieved by using an SSL certificate that is exchanged when a hypervisor is defined in WebSphere CloudBurst. This certificate must be accepted by a user, thus preventing rogue hypervisors from being defined in WebSphere CloudBurst.
Finally, WebSphere CloudBurst provides for the definition of users and user groups with varying permissions and resource access rights in the appliance. You don't have to turn over the keys to your cloud kingdom when you add a user to the appliance. You have the capability to define varying permissions (from simply deploying patterns, to creating them, all the way up to administering the cloud and appliance), and you have the ability to control access to resources (patterns, virtual images, script packages, cloud groups, etc.) at a fine-grained level. These two capabilities combine to allow you to control not only what actions a user can take, but also on which resources they can take those actions.
WebSphere CloudBurst was designed with focus on delivering a secure cloud experience, and I think it hit the mark. I'm sure I didn't address all your WebSphere CloudBurst and security related questions. If you have something specific in mind, leave a comment on the blog or reach out to me on Twitter. I'll do my best to address your question.
In the course of my job, I am lucky to be able to work with both enterprise users and business partners who are adopting and using the WebSphere CloudBurst Appliance. When it comes to the business partner camp, one of my absolute favorites is the Haddon Hill Group. The Haddon Hill Group is an IBM Premier Business Partner, and they have been an early adopter and vocal advocate of the WebSphere CloudBurst Appliance. They have extensive knowledge of the use of the appliance in enterprise accounts, and quite frankly, they are doing some really cool things with WebSphere CloudBurst.
Given the above, I was glad to see summarized results from their various implementations made available recently on the IBM site. The summary is fairly concise, so I encourage you to take a look at the results Haddon Hill Group is getting with WebSphere CloudBurst.
I am not going to rehash the contents of the results here, but there are a couple of things I want to call out. First off, Haddon Hill Group says that WebSphere CloudBurst can provide companies with a '100 times faster time to market' delivery experience. In a practical sense, this means reducing the amount of time to deliver WebSphere environments from 40-60 days on average to just hours. That is an eye-opening data point!
The other thing I want call out here is a quote from Phil Schaadt, President and CTO, Haddon Hill Group. I have had the pleasure of working with Phil and team, and I have heard him echo these same sentiments many times:
"The important thing about the IBM WebSphere CloudBurst Appliance is that it will dispense a WebSphere Application Server image onto your WebSphere Application Server environment or private cloud along with other products within the WebSphere stack, and that application server will be ready in a few minutes. You can do it in a clustered environment, and you can even roll out IBM WebSphere Process Server and get it right in a fully clustered environment with a database connection, in about 90 minutes. You can also easily manage all the configurations of IBM WebSphere Process Server that you need. All the steps that took up so much time and effort on the part of IT staff have been removed. The savings for companies with large WebSphere implementations can be in the millions."
It is always great to see clients putting our technology to use to produce tangible business value. Again, I encourage you to take a look at these reports. As always, I am eager to hear what you think, so leave me a comment or reach out to me on Twitter @damrhein.
I hardly ever have a conversation about WebSphere CloudBurst, or generally cloud computing for application middleware, without the topic of databases coming up. Databases are such an important piece of nearly every application middleware environment, so users want to be sure that whatever they do for their application servers, they can also do for the databases on which their applications rely. That is why the capability to deploy DB2 from WebSphere CloudBurst has been around for as nearly as long as the capability to deploy WebSphere Application Server.
Even though DB2 deployment capability has been around for a while, there are still some common misconceptions regarding the offering. First, I have talked to a fair number of users who are under the impression that we only offer a trial version of DB2 for deployment via WebSphere CloudBurst. While that was true for the first few months of the offering, that is no longer the case. For several months now, a fully supported, 64 bit, production-ready DB2 image has been ready for use in WebSphere CloudBurst. If you were waiting for a DB2 image that you could go live with, wait no longer!
The other misconception, or rather, point of confusion, arises from the fact that the DB2 image for WebSphere CloudBurst is not, by name, a Hypervisor Edition image. I can assure you that is in name only. The DB2 image looks like and behaves like any other IBM Hypervisor Edition image once you load it into the appliance. You can use it to build and deploy patterns in the same way you use other images in WebSphere CloudBurst. You may just have trouble finding it if you search for 'DB2 Hypervisor Edition' as opposed to 'DB2 Server for WebSphere CloudBurst Appliance.'
Instead of going into further detail, I want to refer you to a blog entry from a fellow IBMer, Leon Katsnelson. Leon is a program director for DB2 and is responsible for the team that develops and delivers the DB2 image for WebSphere CloudBurst. In his most recent post, he provides a nice overview of the image and gives good information for those looking to use DB2 and WebSphere CloudBurst (there is also a bit on cloud computing at the beginning that I think is spot on). Check out Leon's post, and let us know what you think!
When we talk about clouds, we tend to think of the usual enterprise with servers centralized in data centers or in server rooms. At least, I do. But why does
it have to be so? Any IT shop will have many more computers than what is in the server farm. With hardware technology accelerating, as always, even desktop machines are capable of multiprocessor computing and doubling as servers.
Cloud offers the ability to do more than web commerce. The concept of cloud can have broad implications for all kinds of parallel processing needs. Right now, there are a number of organizations from SETI to large medical research firms that use volunteers on the internet to help compute through massive computational workloads. The ability to do that on a wider scale is limited by the need to deliver more sophisticated or even proprietary software on the member systems.
What if workstations could be conscribed to be part of a cloud? When the workstation owner is not using it, the entire machine could be repurposed for another need. Then during work hours, the owner's image could be restored. Private owners could even lease their processing time and make some extra money or earn credit of some kind.
Right now I am surrounded by several multicore processor based systems. Any one of them could power a web presence for a small business. All of them could power the website for a medium business. If I maintained a small cloud using the computers of my neighbors, I could possibly lease powerful computing cycles to render the next animated movie or to compute fractal geometry calculations for climate models. If I operated between 9PM and 6AM I could deliver more than a day's worth of computing gain. What would that be worth?
One of my favorite things to do is create content that you, our users, can directly use to adopt and implement our products. Luckily for me, my job allows me to spend a considerable time doing just that for our WebSphere CloudBurst Appliance. In the course of this kind of work, I use multiple different mediums to hand over what I hope is helpful content to you. This includes blogs, articles, demos, and the WebSphere CloudBurst Samples Gallery.
While I like creating content for all of these forums, if I had to pick a favorite, I'm going to go with the samples gallery every time. The reason for this is simple. Users can download and directly use the content in the samples gallery. The samples gallery plays host to script packages, CLI scripts, and other tools that are ready to use with WebSphere CloudBurst (of course, one can also extend these or simply use them as reference). Further, the samples in the gallery are mostly direct responses to suggestions or requests I get from users regarding this type of content, thus increasing its usefulness and relevance.
A good example of the kinds of assets in the gallery is the latest script package I put out there. Recently, I was talking to a user and asked, 'What do you do every single time you establish a WebSphere Application Server environment?' He outlined a few different tasks, one of those being the creation of virtual hosts in the server's configuration. The creation of virtual hosts piqued my interest because many users do that, and the configuration logic itself is fairly consistent regardless of the administrator doing the task. Therefore, I set about creating a sample script package that you can use to create virtual host configuration in WebSphere Application Server.
The script package does two things. It creates virtual host entries, and it configures host aliases for these entries. The script allows the user to supply the data for the entries and aliases they want to create via a properties file. The properties file is pretty basic and allows for the configuration of multiple host aliases for each virtual host entry. Here is an example properties file:
The script package parses the data from a properties file like the one above, and it creates the appropriate WebSphere Application Server configuration. If you are using WebSphere CloudBurst and this kind of configuration task is common for your deployments, you may want to download this free sample. I also want to point out that there are quite a few more samples that are completely free for you to download in the gallery. Check them out and let me know what you would like to see in the samples gallery!
If you are going to install and use WebSphere CloudBurst in your own environment, it is very likely that you would want at least two appliances. Perhaps you want to have a standby appliance in case of a failure on the main appliance, or maybe you have different teams that are looking to utilize the appliance in different data centers. In any case, once you install multiple appliances there's another requirement that will pop up pretty quickly. Naturally you are going to want to share custom artifacts among the various WebSphere CloudBurst boxes.
When I say custom artifacts, namely I mean virtual images, patterns, and script packages. Script packages have been easy enough to share since WebSphere CloudBurst 1.0 because you can simply download the ZIP file from one appliance and upload it to another. However, there are some enhancements in WebSphere CloudBurst 1.1 that make it easy to share both patterns and images among your different appliances.
As far as patterns go, there is a new script included in the samples directory of the WebSphere CloudBurst command line interface package called patternToPython.py. This script will transform a pattern you specify into a python script. The resulting python script can then be run against a different WebSphere CloudBurst (using the CLI), and the result is the pattern is created on the target appliance. You need to be sure that the artifacts that pattern references (script packages and virtual images) exist on the target appliance and have the exact same name as they do on the appliance from which the pattern was taken. There are no other caveats, and this new sample script makes it really simple to move patterns between appliances.
For virtual images, a new feature was added that allows you to export a virtual image from the WebSphere CloudBurst console. Simply select a virtual image, specify a remote machine (any machine with SCP enabled), and click a button to export the image as an OVA file. This OVA file can then be added to another WebSphere CloudBurst catalog using the normal process for adding virtual images. You can see this feature in action here.
Stay tuned for more information about some of the handy new features in WebSphere CloudBurst 1.1. We also should have a comprehensive look at the new release coming soon in a developerWorks article.
In a previous post, entitled Layers of Elasticity, I talked about the new dynamic virtual machine operations in WebSphere CloudBurst. Specifically, I showed you how to use the WebSphere CloudBurst web console to add more virtual machines (nodes) to an existing virtual system. Well, you can do this with the WebSphere CloudBurst command line interface as well.
First, let's assume I start off with a basic WAS ND environment represented by the pattern below:
When I deploy this pattern in WebSphere CloudBurst, I end up with two virtual machines: one for the deployment manager with an embedded IHS instance, one for my custom node federated into the cell. After deployment, suppose I want to use the CLI to interact with this virtual system. Assuming the name of my virtual system is Cluster, I can view my custom node virtual machine with the following CLI code:
The call to the clone function above takes care of creating a new profile and federating the new node into the cell. In addition, WebSphere CloudBurst automatically invokes any script packages from the source virtual machine marked to run at virtual system creation. All because of this single line of code!
The WebSphere CloudBurst CLI is a powerful interface that enables you to automate the function of the appliance. Check it out, become familiar with it, and make WebSphere CloudBurst processes a seamless part of your overall data center management approach.
Virtual Application Patterns are one of the major new features in IBM Workload Deployer v3. You've heard this concept discussed on this blog before and it is really a revolutionary way to manage your applications in a private cloud environment. With Virtual Application Patterns you provide declarative information about your application including functional and non-functional requirements of that application. You get to focus on the application rather than the middleware configuration and IBM Workload Deployer takes care of all the details necessary to launch your application with the criteria you specify. This application-centric approach radically simplifies the deployment of applications in a private cloud. And it is not just the deployment that is simplified; it is also the monitoring, metering, logging, security, caching, etc ... that is consolidated and simplified as well. Everything is custom tailored for the particular application type to provide a significant level of integration and optimization for elastic, efficient, multi-tenant, automated management and execution of that application workload.
In IBM Workload Deployer v3 there are two different types of virtual application patterns provided out of the box; a pattern for web applications and a pattern for database applications. It's no accident that these are also the two most heavily utilized types of applications in most enterprises. Of course more patterns will be appearing in the future and you have the opportunity to create your own custom patterns ... but these first two patterns can cover a substantial number of current application workloads.
So why am I introducing all of this again? Well, I want to make you aware of a new article that was just published which covers virtual application patterns in a very consumable way with enough detail and screen shots to get you started down this path. It is appropriately named: Easy virtual app automation using Workload Deployer . It really does a great job of covering not only the web application pattern - but it also introduces the database pattern (DBaaS) and shared services. If you are about to embark on virtual applications this is a great place to start.
About two weeks ago, I had the opportunity to work with the WebSphere sMash, DB2, and Rational teams on a pretty exciting project. It started during a meeting with the sMash team in which they decided to build a sample application to demonstrate at the Web 2.0 Expo in San Francisco last week. Given the lead team the first thought was to simply show off the application at various IBM expo booths. However, we quickly decided the best way to show off the coolness of sMash was to put it in the hands of users. This led us down a path that would include Rational EGL capabilities, the WebSphere sMash Amazon Machine Image (AMI), and the DB2 AMI.
In a little over a week, we delivered a meaningful Web 2.0 application and put it in the hands of conference attendees. Using WebSphere sMash, we produced services that allowed users to view and search for booths at the conference. Each booth at the conference started with a list of keyword tags, and users could add more tags to let other users know what to expect at the booth. We also delivered a Buzz feature that displayed an aggregated feed from both Twitter and Flickr containing entries about the Web 2.0 Expo.
The Rational team, which was already working on an EGL application that would run on attendee handhelds, leveraged the services from our new sMash application, being hosted on the Amazon EC2 infrastructure, to add to their capabilities. Our decision to host the sMash application on EC2 was driven by two factors. The first was that we had virtually no time to go through the in-house server acquisition process. Second, given sMash’s capabilities to export and import applications, we were easily able to transfer our local application copy to the AMI instance with no code change. Once the application was imported into the running AMI instance, we changed a single configuration file to reference our newly running DB2 AMI instance which stored the booth data for the expo.
I just thought I’d share this example to highlight a couple of cool technologies, Rational EGL and WebSphere sMash, and to illustrate a scenario in which the IBM Amazon Machine Images deliver value. If you have any questions or want to see some of the application code, send us an email. Here's a couple of screen shots of the application:
Dustin and I have been seeingweb sites pop up all over the place with the word 'Cloud' in the name.Everything from web based remote PC services to elastic Web Mail.
I remember in 2000when Business to Business Integration (B2Bi) was the big market buzzword. Every company in the industry was claiming to be "The B2Bicompany". B2Bi was and is not an easy task. Everyone uses and storesdata differently; sometimes even within the same company. So whathappened? Most companies could not deliver products that made the jobeasier in a more generic way and it fell to services based companies.The expense soared and the results were generally poor. XML was justgaining prominence and few "B2Bi companies" ever even heard of EDI (Electronic Data Interchange. It was how businesses shared data before the internet became so capable). Thenet result ended up being that to succeed these providers had to scaleback their claims and muddy the definition of B2Bi. Now you hardly everhear it. The need still exists and the market is robust but the buzzword faded from the lexicon.
Cloud Computing is a powerful concept and the term can encompass many different implementations that achieve Dynamic Infrastructure, On Demand Capacity and Virtualized Enterprises. However, tagging glorified remote desktops and pay-for-GB mail boxes as cloud computing will do nothing but obscure the definition, allow charlatans to deliver poor or incomplete solutions and make it more difficult to convey the value of products and services that support true clouds.
Real cloud providers should be diligent in detailing their services and the value they provide. If the smoke is cleared, the view of the clouds will remain breathtaking.
When I first started to become aware of the cloud computing movement, I remember being intrigued but not all that aware of its possible consequences to me. After all, I was a developer not a systems administrator, so other than professional curiosity why was cloud computing all that important to me? Maybe you are a developer that can see right through my early, naive perception of cloud computing, but maybe you are a developer that, like me in the early going, doesn't quite see why cloud computing should matter to you. In the case of the latter, I've come to realize that there are several reasons why cloud computing matters to the developer. Let me try to sum up a few of those reasons for you here.
Reason #1: Developer services can be delivered via the cloudThere are many different types of services that can be realized from a cloud (public, private, or hybrid) that could have a large impact on the way developers work. As I mention in a previous post, IBM announced a Tools as a Service initiative in which IDEs are made available within a public cloud. IDEs in the cloud give developers a single development environment that can be accessed from any machine at any time. Better yet, we don't have to worry with installing and maintaining the environment. In addition to IDEs in the cloud, with the increased focus on virtualization and virtualization management that cloud is bringing, the ability to rapidly procure and instantiate runtime environments should become standard practice. This means that new ideas and new product code can be rapidly prototyped and tested. No longer should a proof of concept be delayed because it couldn't be proven in a runtime environment.
Reason #2: Cloud computing means a world of new products and offeringsAs a developer, it is a continuous battle to keep up with constantly emerging technologies, but it is imperative that we do so in order to ensure we take full advantage of available solutions. Cloud computing providers introduce a whole new world of service offerings for consumption by application developers. Cloud providers are offering new storage solutions, new database implementations, new content distribution mechanisms, new application integration capabilities, etc. As developers who may potentially be writing applications that run in the cloud, these new offerings directly affect the code we write. We need to educate ourselves about these new services, and we should understand when these solutions can be best leveraged to deliver our end product.
Reason #3: SOA becomes more importantOkay, so maybe this is not aimed squarely at the developer, but I know many times a developer wears the hat of architect as well... even if they don't know it! In a cloud computing world, the applications and services we deploy to the cloud should align and fit into our SOA. This is critical if we are to fully exploit the benefits of ubiquity offered by the cloud. Cloud computing inherently provides the ability to access services from any machine with a network connection, automatically giving the kind of service ubiquity sought by many companies. By developing these services in a SOA-compliant manner, we extend the reach by making it more readily consumable by other application components. We move beyond pure end-user applications and services, and in doing so new or increased revenue streams may be realized for the service.
These are just a few of the ways I see cloud computing currently affecting the developer's role. There are a myriad of reasons that developers should be cognizant of cloud computing, and I expect the list of reasons to boom as cloud computing continues to advance. I'd also like to hear what you think about cloud computing and the developer, so post a comment below if you would like to join the discussion.
When we talk about WebSphere CloudBurst, its applicability to development and test environments usually jumps out at the audience. Using the appliance, you can provision fully configured WebSphere cells (your applications included) as a set of virtual machines in a matter of minutes. Further, a patterns-based approach means you can be sure that you are going to get consistent results every time.
The ability to very quickly and consistently stamp out customized WebSphere environments is a huge benefit for test and development purposes because these are typically dynamic. Users frequently stand up and tear down these environments to support the application development process.
This is fine, but sometimes these benefits and particular use case for the appliance lead customers to wonder how it is applicable to production environments. After all, you do not frequently setup and tear down production environments. It is much more common that you deploy your production environment and leave it be so long as you are getting the desired behavior. So, how does WebSphere CloudBurst help with your production environments?
To answer this, we have to avoid looking at the appliance's applicability to production environments in a vacuum. What do I mean? Well, as you are well aware, an application environment goes through many stages in order to get to production. For example, in your organization a given application environment may go through development, test, staging, and pre-production before you finally promote it to production.
One of the challenges as you move your application environment from one stage to the next is maintaining configuration consistency. In other words, you somehow have to ensure that the environment you tested and verified is the same one that you eventually deploy into production. This is where WebSphere CloudBurst patterns can prove invaluable.
You can build WebSphere CloudBurst patterns that represent your various application environments (from the topology to the configuration), and effectively parameterize those patterns so that they can be used across each stage of your application lifecycle. For instance, as you move an application environment from development to test, the location of backend data sources may change. Simply make this location a parameter configurable during pattern deployment, and you can reuse the pattern for both development and test. If you extend this parameterization methodology to include the variable bits of configuration for each stage in the application's lifecycle, you can reuse the pattern from development all the way to production. The result is that you can be certain the environment you test and verify is the exact same one that you put in production.
For me, the beauty of WebSphere CloudBurst is really the patterns-based approach. This approach not only makes configuring and deploying WebSphere environments faster and simpler than ever, but it also makes the standing up of such environments easily repeatable. This can mean tremendous benefits for the deployment of your applications throughout their lifecycle.
For this post, I'm turning the tables. Usually, I try to write about things that I think are helpful, or I try to answer some pretty commonly asked questions. I hope that at least a few of these posts have been helpful, but today I am not going to take a shot at what may (or may not) be useful. Nope. Today, I want to ask you: What do you want to know?
To be clear, I'm asking this question in two scopes:
What do you want to know about WebSphere CloudBurst and our IBM Hypervisor Edition images?
What do you want to know about emerging software technologies and trends?
For the first question, you may think I'm engaging in a bit of lazy web behavior. To be fair, that may be partially true, but I really want to make sure that these blogs either continue to stay relevant for you or that they begin to become more relevant for you. I'm open for any kinds of questions, queries, feedback, etc., so please fire away.
The second question is in reference to something new we are just starting in conjunction with SMEs from the IBM labs. We are going to be posting interviews with experts from the IBM labs about the things our users (you) want to know. This could be emerging trends, common development pain points, new product offerings, or anything else that comes to your mind. Again, anything goes, so send me your thoughts, questions, ideas, feedback, etc.
So, I'm leaving you with some homework: give me some answers for these two questions. You can help to steer the direction of this blog as well as the direction of our interview sessions with IBM experts. Leave me a comment here, reach out to me on Twitter (@damrhein), or send me an email.