Next up on our sneak preview of the building block sessions for the Enabling cloud computing with WebSphere campaign is the Dynamic Infrastructure Services block. One portion of that block is a discussion about some of the technical capabilities of WebSphere Virtual Enterprise given by Nitin Gaur. Nitin is a Consulting IT Specialist within WebSphere, and an all-around WebSphere guru. I caught up with him to ask a few questions about his upcoming podcast.
Me: When people think cloud computing, one of the core concepts is 'on demand'. They want just enough resource at just the right time. In that sense, can you tell me a little about the On-Demand Router (ODR) in WebSphere Virtual Enterprise (WVE)? What is it and what core functions does it provide?
Nitin: So, first allow me to take a step back. In my view, cloud computing is a new consumption and delivery model nudged by consumer demand and continual growth in internet services. I classify any Cloud computing platform exhibits the following 6 key characteristics:
Standards based delivery
Usage based equitable chargeback
I thus, deliberately use the term platform in the context of a cloud computing environment that facilitates flexibility, robustness and agility, as a systemic approach in providing a stage to hosting applications without the concern for availability or provisioning of underlying resources. Since hardware and software virtualization do offer significant cost and resource management advantages, it is not rare to see virtualized platforms as core building blocks of any cloud platform. Such virtualization technologies provide an elastic infrastructure service. In this respect, WVE provides application server virtualization, which enables an elastic business-policy-driven application infrastructure.
Now back to the On-Demand Router. The ODR is the autonomic engine that drives the activity enabling the elastic infrastructure discussed above. The ODR operates in a highly dynamic WVE environment, so it is imperative for the ODR to be aware of any changes in the environment such as newly deployed applications, the addition of new application servers, and any planned or unplanned server outages. It achieves this awareness by continuously interacting with WVE's fluid and dynamic feedback mechanism.
Me: Autonomic capabilities seem to be a core part of WebSphere Virtual Enterprise. To that end, can you tell us a little about the autonomic capabilities provided by dynamic clusters in WVE?
Nitin: Dynamic application placement is a defining capability of WVE that directly contributes to WVE's ability to provide a dynamic, virtualized, and goal-oriented environment for workload management and continuous availability. The dynamic application management capability maximizes the efficient use of hardware resources by allocating resources appropriately per application based on fluctuating demands in the enterprise infrastructure. It determines which servers to stop and start in a dynamic server cluster in order to meet current demand for applications, and it does this in the context of a set of administrator-defined policies that uphold the enterprise’s service level agreements (SLAs) for its application infrastructure. The dynamic application placement framework must balance resource availability against health policies, service policies, and the importance levels assigned to applications.
Dynamic server clusters are key to WVE’s ability to dynamically adjust the application environment according to server load, and they provide the basis for a virtualized server runtime environment. The big difference between a dynamic cluster in WVE and a static cluster in WebSphere Application Server is that dynamic clusters grow and shrink as needed to meet current demand by starting and stopping members of the cluster. Although dynamic clusters and static clusters can co-exist in a cell, dynamic application placement can only work with dynamic clusters. To prevent unchecked growth, each dynamic cluster has a mechanism that you use to define a boundary for that cluster’s growth. The boundary is both quantitative (based on criteria that define the minimum and maximum number of application servers that can run in the cluster simultaneously) and locational (based on criteria that confine the growth of the dynamic cluster to a defined set of nodes).
Me: I know you have been around the country, and for that matter globe, helping our users to adopt and implement WebSphere Virtual Enterprise. Tell us about one of your favorite customer stories.
Nitin: So I would cite an example of one of the leaders in the entertainment Industry (and my favorite customer), let's call them Company X (since I cannot cite the name). The core of the company's application infrastructure system is the Sales App Infrastructure (SAI) consisting of more than 10 enterprise applications. To keep up with demand, Company X was required to procure more hardware and software to support the core systems. This strategy resulted in a large infrastructure footprint with low hardware utilization. The increase in hardware footprint became difficult to manage and required additional resources. The large footprint of the company's deployment put them in reaction mode rather than a posture of proactive monitoring. Some application servers rendered themselves unavailable and required the team to restart them every 24 hours. From a cost standpoint, it costs the company the same amount of money to request a virtual platform as it would to purchase a new physical server. This led to significantly under utilized hardware throughout the enterprise. WVE was brought in to Company X to help better manage their WebSphere Application Server footprint. Dynamic clusters, application health policies, and application editioning features helped the company to better utilize hardware, reduce hardware expenditures, increase visibility into their applications, and improve availability of their applications.
In addition to helping with the existing environment, WVE helped Company X to roll out a new project with applications that required continuous availability to worldwide users. The team made use of policy-based workload management to ensure performance and availability levels of these new applications met their business needs. In addition, the company was able to reduce the amount of WebSphere Application Server licenses and physical servers required for this new deployment. In sum, WebSphere Virtual Enterprise saves the company significant time, money, and management effort.
As a final preview of this week's building block sessions in the Enabling cloud computing with WebSphere campaign, I caught up with WebSphere DataPower architect Tim Smith. Tim is delivering a podcast that introduces and explains the new Application Optimization capabilities in the WebSphere DataPower line of products. Here is what Tim had to say:
Me: I speak with quite a few customers about the WebSphere CloudBurst Appliance, and for once I'm happy to be the one asking this question. Why do we deliver WebSphere DataPower in the appliance form factor?
Tim: DataPower has become a dominant player in the DMZ and in the ESB. Much of the reason is that this is a purpose built hardware appliance. There are many things that our customers like about this appliance package. First, it has security as part of its DNA. The basis for securing connections, applies throughout the network whether it is in a DMZ or in an ESB. The physical box provides tamper resistant protection. Another reason is availability -- there are no spinning media, dual power supplies, and a focus on fail over support.
In both the DMZ and the ESB, there has been a proliferation of products. The main reason for the proliferation is that customers want to remove as many decisions from the general purpose server as possible, and let servers do what they do best, process application requests. The devices that have been proliferating make more decisions on the request. They do deep packet processing and routing. They also may transform the request into an entirely different request. So, there are an abundance of "pre-processing" decisions and operations made. With DataPower, many functions are integrated into the single hardware platform, giving you a smaller box count. No need to purchase and maintain several platforms, their OS and software versions, compatibility lists, etc. With a single hardware box that does so many things, we can greatly reduce the total cost of ownership for our users.
The DataPower appliance is a blend of Hardware and firmware that is well provisioned with hardware assists that help compile, parse, and assist in many of the intensive packet processing capabilities. To summarize, you get an extremely flexible and adaptable product that reduces total cost while increasing performance.
Me: A theme that comes up in cloud computing over and over is consolidation. Can you speak to the consolidation offered by WebSphere DataPower appliances with respect to the self-balancing capabilities?
Tim: Yes. My answer to the prior question was a long-winded way of describing DataPower's ability to consolidate many features into a single platform. Self-balancing is an example. As DataPower became more popular, larger installations required multiple DataPower appliances in a tier of platforms. A common architecture was to place a load balancer or IP sprayer in front of the tier to distribute the traffic evenly among the tier of DataPower appliances. An IP sprayer is an example of another platform that needs to be added to the environment. It is another box that must be purchased, managed, and maintained. Self-balancing is a feature that was added to DataPower to eliminate the need for an IP sprayer. The way it works is that one of the DataPower appliances in the tier owns the Virtual IP (VIP) Address. It receives all of the traffic, and then distributes it to each of the other DataPower appliances in the tier. If the DataPower appliance that owns the VIP address goes down, one of the others is elected and it takes over. The result is one less product required to support the same level of functionality.
Me: For much of the past, cloud computing mostly focused on virtualization and management of resources at the raw compute level (servers, storage, networking, etc.). While there is definitely ongoing focus here, we start to see it moving up the stack towards applications, and part of that effort includes more evolved application load distribution. With that in mind, how can WebSphere DataPower help users more effectively distribute requests to their applications?
Tim: If a front end appliance or gateway device can dynamically learn information about its environment, specifically the back end, it will be able to make better decisions on how and where to route the request. This is one of the tasks that the Application Optimization feature addresses. Information from the back end can of course be manually configured, but the real value in cloud computing is dynamically adapting when new server resources are brought on line or are taken off line. In the 3.8.0 release, we implemented something called Intelligent Load Distribution (ILD). Intelligent load distribution focuses on continually learning the topology of a back end, updating DataPower's load balancers with that information, and distributing the load based on the updates. In addition to the topology, ILD learns the weights associated with each server. These weights can continually and automatically change as traffic patterns change. The result is load balancing to the back end that sends the optimal amount of load to each server.
Another traffic distribution aspect incorporated into ILD is session affinity. When a server application needs to receive every request from a given client, session affinity is used to route the requests to the same server. In some sense, session affinity overrides the load balancing algorithm. The session affinity support works with any type of back end server, but with a WebSphere back end, all session affinity information is automatically configured.
Me: Continuing on the theme of application intelligence, what is this new Application Routing option in WebSphere DataPower?
Tim: ILD focused on learning the topology of the network and making better decisions based on an ever changing cloud topology. Application Routing does something similar by learning which applications are running on each server. Once a request is handed to DataPower's load balancer, the request is classified as to the application that it is targeted for. Then the request is load balanced amongst the servers that are running that application. The information to perform application routing is dynamically learned and changes as applications are added or removed.
WebSphere has invested substantially in managing the life cycle of an application. Changing from one edition of an application to the next sounds like an easy task, but it can be very difficult to perform this type of maintenance on a production environment. The DataPower appliance supports life cycle management by working with the WebSphere back end to provide group and atomic edition rollout. The rollout feature allows traffic to be gracefully diverted from servers that are being taken offline and reloaded with the new application edition. This rollout can be done while leaving the other applications on the server unaffected. This support makes edition rollout a very simple task for the system administrator.
I wanted to take a brief moment to remind you that the Enabling cloud computing with WebSphere campaign is well underway. Check out the various presentations and podcasts on solutions such as WebSphere Virtual Enterprise, WebSphere CloudBurst, Cast Iron Systems, WebSphere DataPower Application Optimization, WebSpan Integration as a Service Cloud, WebSphere Application Server Feature Pack for Dynamic Scripting, and more. All you have to do is navigate to the site, and you can download presentations or listen to audio/video replays at your convenience.
In addition to the podcast sessions, I want to point out a couple of upcoming events. The first is a live Q&A webcast that takes place next Thursday (9/23). Myself and other IBMers will be joining the webcast to answer your questions about cloud computing and WebSphere solutions. You can register to attend the session here, and you can submit questions ahead of time here.
A week after the live Q&A webcast (9/30), there will be an online JAM. Think of this as an online chat between IBMers and you, our users. You can ask questions, give us your feedback and suggestions, or just watch the proceedings. Like with the live Q&A webcast, you can submit questions ahead of time by navigating here.
I hope you are getting a chance to take advantage of some, or all of the campaign. Of course, you do not have to wait for the sessions to ask questions or give feedback. You can always leave a comment here or reach out to me on Twitter (@damrhein). Happy Friday!
When you build application environments in WebSphere CloudBurst, there are three main elements that comprise those environments: virtual images, patterns, and script packages. It is likely that at some point you will want to export your environments from a particular WebSphere CloudBurst Appliance. This may be in order to apply version control techniques, share resources among multiple appliances, backup business-critical files, or any number of other reasons. Whatever the reason, WebSphere CloudBurst provides the necessary facilities to support both image and pattern export. WebSphere CloudBurst provides export capability for virtual images that you can access via the web console and CLI. In addition, when you download the CLI from the appliance, you get a sample script called patternToPython.jy that you can use to facilitate pattern export.
The patternToPython.jy sample produces a script that you can use to recreate the targeted pattern on an appliance of your choosing. However, before running the script to recreate the pattern on an appliance, you must ensure that any images and script packages referenced by the pattern exist on the target appliance. Since WebSphere CloudBurst enables you to easily export and import virtual images, all you have to do is account for script packages when attempting to export complete application environments from WebSphere CloudBurst. While the appliance does not directly provide the means to export script packages like it does for images and patterns, the WebSphere CloudBurst Samples Gallery includes a sample that does. You can find this sample in the CLI scripts section of the samples gallery, with the title Export a script package in a portable format.
After downloading the sample CLI script, you simply unzip the archive and use the embedded Jython script from the WebSphere CloudBurst CLI with the following command:
This command will create a ZIP file containing the contents of the script package specified by SCRIPT_PACKAGE_NAME. In addition to simply copying the contents of the specified script package into the new ZIP file, the command will trigger the creation of a cbscript.json file based on the definition of the target script package. This file defines the properties of the script package such as the execution command, command arguments, etc., and the exportScriptPackage.jy script adds it to the newly produced ZIP file.
The result of using this sample is a self-contained ZIP file that you can load into any other WebSphere CloudBurst Appliance. Since the ZIP file includes the cbscript.json file, when you load it into another appliance you do not have to define any of the properties for the script package. This eliminates the potential for definition errors as you move script packages from one appliance to the other and makes it simple to export/import script packages among appliances.
There are a couple of things about the sample worth mentioning. First, if a cbscript.json file exists in the specified script package, the export script will not create a new one. Instead, the sample simply copies the existing one into the new ZIP file. Second, the target script package's contents must be a ZIP file. That is to say, the file associated with the script package in WebSphere CloudBurst must be a ZIP. If you are using anything prior to WebSphere CloudBurst 2.0, this is not an issue since you can only associate ZIP files with script packages. However, WebSphere CloudBurst 2.0 allows you to associate any type of file (ZIP, shell script, python script, etc.) with a script package.
If you are looking to effectively export all of the components of your WebSphere CloudBurst patterns, check out this sample script. I think it will make the process a bit easier for you. As always, comments and feedback are welcome.
The concepts that govern users and user groups in WebSphere CloudBurst are fairly basic, but I get asked about them enough that I believe they warrant a short discussion. First things first, you can define users in WebSphere CloudBurst and optionally define user groups to assemble users into logical collections. For both users and user groups, you can assign roles that define the actions a particular user or group of users can take using the appliance.
All of that is straight forward, but it can get a bit tricky once we start considering the effects of user permissions when managing at the user group level. The basic premise is that when a user belongs to a group or groups, the user's effective permissions are a sum of the permissions to all of the groups to which they belong. While that is easy to say, and maybe even to understand, I feel like an example always helps.
Consider that we have a single user WCAGuy that belongs to the PatternAuthors, ContentCreators, and CloudAdmins groups. The permissions for those groups are as follows:
PatternAuthors: Users in this group have permission to create and deploy patterns
ContentCreators: Users in this group have permission to create catalog content as well as create and deploy patterns
CloudAdmins: Users in this group have permission to administer the cloud, create catalog content, and create and deploy patterns
Naturally then, it follows that the WCAGuy user can administer the cloud, create catalog content, create patterns, and deploy patterns. So then, what happens if we remove the WCAGuy user from the CloudAdmins user group? Well, as you may expect, there is an update to the user's permissions. The WCAUser user can no longer administer the cloud, but they can still create catalog content, create patterns, and deploy patterns (owing to their membership in the other two groups). Similarly, if we next removed the WCAGuy user from the ContentCreators group, then the user would retain only the permission to create and deploy patterns.
Just one more thing, let's talk about what happens when I remove a user from a group and they no longer belong to any groups. Consider that I created the WCAGuy user with the permission to create catalog content as well as create and deploy patterns. Next, I added the user to the CloudAdmins group, meaning the user now has the permission to administer the cloud. I promptly decide that the user has no business with those permissions, so I remove the user from the CloudAdmins group. What happens? The user retains the permission set of the last group to which they belonged. In this case, that means the WCAGuy user retains cloud administration rights. I have to update the user's permission set if I want to take that right away, but in this case, it will not automatically disappear upon removing them from the CloudAdmins group.
I hope this helps clear up any ambiguity you may have had concerning users, user groups, and permission sets in WebSphere CloudBurst.
It seems like it was announcement day across IBM, and specifically in WebSphere. While the announcements were numerous and touched many different topics, I want to focus on a couple of announcements of particular interest to those of you interested in WebSphere CloudBurst and IBM Hypervisor Edition virtual images.
First, for all of our WebSphere Process Server and WebSphere Business Monitor users, there are a couple of important pieces of information in this announcement. This announcement outlines the availability of WebSphere Business Monitor Hypervisor Edition. The new image allows you to dispense WebSphere Business Monitor 7.0 environments using WebSphere CloudBurst to VMware hypervisors. In addition, the announcement outlines the expansion of the existing WebSphere Process Server Hypervisor Edition image to support the z/VM platform and the Red Hat Enterprise Linux (RHEL) operating system for VMware.
Moving beyond our BPM set of solutions, IBM also announced the availability of a WebSphere Message Broker Hypervisor Edition. This virtual image allows you to construct and deploy WebSphere Message Broker and WebSphere MQ environments using WebSphere CloudBurst. The stack includes the RHEL operating system, and it is ready to run on VMware hypervisors.
With that in mind, here's an update to the WebSphere CloudBurst supported product matrix:
* Availability subject to dates documented in referenced announcement letters
As you can see, we are continuing our effort to expand the choice you have when using WebSphere CloudBurst to create and deploy application environments to your cloud. If you are interested in using WebSphere CloudBurst for WebSphere Business Monitor, WebSphere Process Server, or WebSphere Message Broker, check out the above announcements. You will find more technical information as well as planned availability dates.
Just one last scrap of food for thought. Feedback from you, our users, is instrumental as we continue to expand software choice with WebSphere CloudBurst. Please continue to let us know your thoughts and needs!
It's really hard to complain about my work week right now. As I write this blog, I'm sitting in the Congress Center in Düsseldorf, Germany looking out over the Rhine River. As an aside, in Germany it is the Rhein River, and I have a historical connection to this body of water. My surname, Amrhein, translates (loosely) to 'on the Rhein'. It does not take an expert in genealogy to conclude that I have ancestors who at one time or another lived very close to this important German waterway.
Okay, putting the family tree aside for a minute, there is a good reason that I am in Düsseldorf this week. The city, and specifically the Congress Center, is playing host to the IBM European WebSphere Technical Conference. I am here presenting sessions that include a WebSphere CloudBurst overview, a WebSphere CloudBurst hands-on lab, and an up-close look at one of our internal team's use of the appliance. I have done each of these sessions once so far, and attendance was great, audience participation high, and feedback forthcoming. I am hearing and seeing the same thing in other sessions, which is of course, ideal for us presenters.
Now, to focus in on WebSphere CloudBurst for a bit, it seems that I am hearing a recurring question this week from the mostly European audience: "Why is WebSphere CloudBurst delivered as an appliance?" I am sure that I addressed this question in a previous blog post, but I believe it bears revisiting. There are various reasons I could give for the appliance form factor, but I like to distill all of that down into three major reasons: Consumability, Performance, and Security.
From a solution consumability perspective, nothing beats the appliance approach. WebSphere CloudBurst is an integrated hardware and software solution that delivers a specific set of function. You do not have to install software, procure and maintain storage for resources on the appliance (images, patterns, scripts, etc.), and maintain software components over time. You simply drop the appliance in to your data center, perform a one-time initialization, hook it up to the network, and you are ready to start leveraging WebSphere CloudBurst to build out your private cloud. While there is definitely work to setup the cloud infrastructure that WebSphere CloudBurst deploys environments to, we can completely eliminate a significant portion of solution implementation lead time by delivering everything you need in the appliance.
The performance benefits of an appliance approach are a natural result of building an integrated hardware and software stack. Design and development teams provide optimizations in both the hardware and software based on the fact that both the hardware and software have intimate knowledge of each other's design. In other words, this is not a 'least common denominator' tuning approach. Rather, the integrated design leads to enhanced performance for the specific set of functionality provided by WebSphere CloudBurst.
Finally, appliances enable us to deliver a very hardened, secure device. We provide private key encryption of every resource stored on the appliance. That private key is unique to each appliance and cannot be modified. In addition, the physical casing is tamper-resistant. If someone removes the casing, a 'Get Smart' style kill switch puts the appliance in a dormant state. You must send the appliance to IBM so we can reset it before further use, thus providing an additional layer of physical protection on top of the encryption. These security features, plus more, like a shield that prevents anyone from executing code on the appliance, come right out of the box and require no end-user configuration activity. In this way, you can simply focus on leveraging the user security and access controls provided by WebSphere CloudBurst.
If you had any questions on the rationale behind the appliance form factor of WebSphere CloudBurst, I hope this helps. I am off for now... back to the conference and the wonderful city of Düsseldorf.
I write a lot about WebSphere CloudBurst script packages. Typically, I write about what they are, how to create them, and even provide some samples from time to time. I find that most of the time I'm either writing or talking about script packages from the standpoint that they allow you to automate the delivery of customizations to environments you deploy with WebSphere CloudBurst. More specifically, I usually explain how you can include these script packages in your patterns to ensure that your custom scripts execute as part of every pattern deployment. The truth is, that is not the whole story. In fact, it's only 1/3 of the story.
In WebSphere CloudBurst, when you define a script package you also define its execution mode. The execution mode can be one of three values, and it indicates the invocation time for the script. The default value is at virtual system creation, and that tells WebSphere CloudBurst to automatically invoke the script as part of the deployment process. This seems to be the most commonly used execution mode, and in the original version of WebSphere CloudBurst it was the only available mode (which probably attributes to why I only usually tell 1/3 of the story here). As you may expect, there is a wide range of usage scenarios for this class of script packages including installing applications, activating monitoring agents, registering cells with an externally managed DNS server, and much more.
If you are like me (and many humans), you enjoy and actually expect symmetry. In that regard, it probably comes as no surprise that there is a script package execution mode called at virtual system deletion. As the name indicates, this class of script packages executes as an automatic part of the virtual system deletion process. When a user tells WebSphere CloudBurst to remove a virtual system, before it shuts down the machines in the system, it will run each script package marked to execute at virtual system deletion. Typical use cases for these scripts include removing information about the cell from externally managed DNS servers, freeing up connections with external systems, and other external 'clean up' activities.
So this leaves the final execution mode for script packages, the when I initiate it mode to be precise. This class of script packages executes when explicitly triggered by a user. In the virtual machine detail section for a deployed virtual system, you can see a list of user-initiated script packages for a given machine. There is a start button by each of the user-initiated script packages that allows you to invoke the script when, and as many times as you need to. While these script packages have many different use cases, the most common use case is to deploy application updates. Users build these application update scripts, attach them to a pattern, and invoke them whenever they want to deliver an updated application into their already deployed environment.
WebSphere CloudBurst script packages are one of the main vehicles for delivering your customizations to your cloud environments. The three execution modes mentioned above allow you to determine when the right time to deliver those customizations is.
In keeping with the impressive release pace, WebSphere CloudBurst 188.8.131.52 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 184.108.40.206, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 220.127.116.11 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 18.104.22.168, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 22.214.171.124, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
In my last post, I concentrated on the new enhancements to WebSphere CloudBurst 126.96.36.199. One of the major new additions was the introduction of Environment Profiles, and I promised a developerWorks article would be forthcoming. The article is now live along with a demo that showcases the capability of environment profiles.
As I mentioned in my last post, environment profiles center around giving you more customization capability during the pattern deployment process. In WebSphere CloudBurst, the pattern deployment process consists of the five main steps depicted below.
Traditionally, WebSphere CloudBurst controlled the entire deployment process, thus closing it off to the deployer. Environment profiles extend the customization reach of users to be able to effect steps 1-3 in the above diagram. Specifically, environment profiles give you the following control:
Control over the assignment of IP addresses and hostnames to pattern parts: Instead of having WebSphere CloudBurst automatically assign IP addresses, and thus hostnames, to virtual machines during deployment, you can explicitly set both values during the deployment process.
Ability to deploy single patterns to multiple cloud groups: Previously, when deploying a pattern you selected a single cloud group and WebSphere CloudBurst deployed all the parts in the pattern to machines within that cloud group. While this may be okay for many cases, other cases may require you to deploy some parts of the pattern to one group of machines while other parts map to a separate set of machines. Before environment profiles, you could accomplish this with multiple patterns. With environment profiles, you can accomplish it with a single pattern.
Ability to supply virtual machine naming standards: As part of deploying a pattern, WebSphere CloudBurst creates one to many virtual machines with distinct names. Environment profiles allow you to supply a naming standard that WebSphere CloudBurst will use when creating the machines as opposed to default naming schemes previously used.
It is important to note that the use of environment profiles is completely optional, and you can continue to use the traditional deployment process, thereby leaving WebSphere CloudBurst in control. That said, the introduction of environment profiles is a direct response to consistent user feedback we received regarding the need for more control during the deployment process. Based on my user conversations, these profiles address many of said needs in an easy to use, straightforward manner. We are, of course, eager to know what you think. As always, you can let me know right here, through email, or on Twitter (@damrhein).
Virtual image parts play a huge role in WebSphere CloudBurst. When crafting your own customized patterns, you include anywhere from 1 to n parts from as many different virtual images as is necessary. These parts represent the different node types or personalities within a given Hypervisor Edition image, and form the basis of your pattern. When you deploy a pattern, such as the one pictured below, WebSphere CloudBurst creates a distinct virtual machine for each part.
This means that after deploying the above WebSphere Application Server pattern, you will have four virtual machines comprising your virtual system. This gives you a clean separation of concern by providing a unique container for each of your application environment nodes. This can attribute to performance optimization, increased availability, and much more. However, this approach is not suitable to all use cases. In some scenarios, especially when trying to control costs and increase consolidation, you may want to deploy a multi-node WebSphere Application Server environment within a single virtual machine. Based on what I showed you above, you might think our approach in WebSphere CloudBurst makes this impossible, but you would be overlooking an important component of patterns.
That component is of course the second building block of patterns... script packages. As you probably know, script packages allow you to supply just about any customization you want. In the case that you want a single virtual machine to host a number of WebSphere Application Server nodes, maybe even an entire cell, all you need to do is supply a script package that constructs the necessary nodes during deployment. In fact, you don't even have to write the script package. You can use the free sample in our samples gallery. As seen in the pattern below, you include this script package on a sole deployment manager part in a pattern.
The script script package provides parameters that define the node name, number of custom nodes, and number of web server nodes you want in your cell. During the deployment process, the script takes this information and constructs the cell you define. This includes creating the custom and web servers nodes and federating the custom nodes, thus completing the creation of your WebSphere Application Server cell. In this case, the script package provides deployment flexibility that is sometimes a necessity, and it is just another example of the many degrees of flexibility enabled by the script package design.
I should point out that a part in a pattern does not always map to a single node. For instance, in the case of WebSphere Process Server, there is a part that represents a complete, multi-node golden topology encapsulated within a single virtual machine. However, if you find yourself using images that do not contain these multi-node parts, rest easy knowing script packages provide you the flexibility you need.
Usually when I am discussing WebSphere CloudBurst with clients, the subject of tracking usage comes up. While 'tracking usage' is pretty broad and could apply to any number of things, we often come back to two major concepts. First, users want to be able to track compute resource usage in the WebSphere CloudBurst cloud, as this helps in cloud capacity planning. Second, users want to be able to track usage by individual WebSphere CloudBurst users in order to facilitate chargeback. In both cases, WebSphere CloudBurst provides reports that help you.
When it comes to tracking compute resource usage in your WebSphere CloudBurst cloud, the appliance provides a set of pre-defined reports on the Cloud --> Machine Activity page.
As you can see from the snapshot above, WebSphere CloudBurst provides usage reports for both memory and CPU attributed to either individual hypervisors or virtual machines. In addition, the appliance tracks storage usage by device and IP usage in your cloud. For each report type, you can specify a desired date range and let WebSphere CloudBurst produce a graph showing usage over that time. The below picture shows the report for memory usage by hypervisor over a one month period.
Tracking compute resource usage is certainly important, but if your interests are mostly about using WebSphere CloudBurst to facilitate chargeback, you likely want to know about our user reports. You can find these reports on the Cloud --> User Activity page of the appliance. On this page, you will find a table that lists each user and their usage of virtual machines, CPUs, memory, and storage over a period of time that you specify. Further, you can download a comma separated value file that contains this data for further parsing or processing on your part. The image below shows an example of the user activity table.
In addition to the user usage data provided above, many WebSphere CloudBurst users find that they want to track the amount of time users had running virtual systems deployed through WebSphere CloudBurst. While the appliance does not provide a direct report with this information, you can use this free sample to calculate virtual system duration times. This free tool uses data available in the WebSphere CloudBurst audit log (data you can process to produce any custom report you need), and it calculates virtual system duration time as well as virtual system time attributed to each user. You use the WebSphere CloudBurst CLI to invoke this tool, providing it with your start and end dates for the calculation (you can find further invocation instructions inside the ZIP file containing the tool). The image below shows example output for both the virtual system duration and user virtual system time reports.
'Tracking usage' means many different things to different people and use cases. I hope the above information regarding usage tracking in WebSphere CloudBurst gives you a good idea of what you get out of the box, as well as what you can do by using the audit log (in a similar fashion to the free tool mentioned above). If you have any questions, requests, or feedback, please let me know.
Looking for a reminder of the difference a year can make? If so, just take a look at the last year or so for the WebSphere CloudBurst product. Since about this time last year, we have seen the release of versions 1.1, 1.1.1, 2.0, and 188.8.131.52, each one bringing their own set of major enhancements and features. Owing to this aggressive pace, it is sometimes easy to miss out on the latest capabilities of the product. For that reason, I wanted to give a brief rundown of some (definitely not all) of the major additions to WebSphere CloudBurst over the past year.
PowerVM and z/VM support: WebSphere CloudBurst 1.1 introduced support for PowerVM (based on Power5 and Power6 systems), and version 1.1.1 introduced support for z/VM. This means that a single WebSphere CloudBurst Appliance can provision to VMware, PowerVM, and z/VM virtualization platforms.
Power7 support: WebSphere CloudBurst 184.108.40.206 introduced support for Power7 systems, thus allowing users to take advantage of the significant enhancements provided by Power7 via WebSphere CloudBurst deployments.
Expansion of the IBM Hypervisor Edition portfolio: The portfolio of images that you can deploy using WebSphere CloudBurst now includes WebSphere Application Server, WebSphere Process Server, WebSphere Portal Server, WebSphere Business Monitor, WebSphere Message Broker, and DB2. In addition to adding new images, we also expanded the platform and operating system support for existing images. For example, you can take advantage of the Red Hat Enterprise Linux OS for WebSphere Application Server Hypervisor Edition, and you can deploy WebSphere Process Server Hypervisor Edition to z/VM infrastructure.
Addition of the Intelligent Management Pack: The Intelligent Management Pack is an optional feature of the WebSphere Application Server Hypervisor Edition that allows you to take advantage of autonomic, policy-driven runtime management capabilities in your deployed environments. This includes the ability to create proactive health policies for your environments, assign SLAs to your applications, manage the update of applications, and more.
License management capabilities: In WebSphere CloudBurst version 2.0 and later, you can make use of license monitoring and management functionality. This allows you to get both point-in-time and historical views of software PVU usage within your cloud, and it allows you to setup policies concerning the usage of PVUs for WebSphere CloudBurst deployments.
Environment profiles: WebSphere CloudBurst provides quite a bit of out-of-the-box deployment automation in terms of selecting hypervisors, assigning IP addresses, and more. However, sometimes you need more control over exactly how this happens. WebSphere CloudBurst 220.127.116.11 introduced environment profiles that you can use to exercise more control over how deployment happens in WebSphere CloudBurst.
In my view, this is quite an impressive list of features delivered within a year's time. I should also reiterate that this is by no means a complete list, but just a selection of some of the major enhancements during this time. If you have any questions about the above additions, or if you have any questions on other features, please let me know.
One of my favorite things to do is create content that you, our users, can directly use to adopt and implement our products. Luckily for me, my job allows me to spend a considerable time doing just that for our WebSphere CloudBurst Appliance. In the course of this kind of work, I use multiple different mediums to hand over what I hope is helpful content to you. This includes blogs, articles, demos, and the WebSphere CloudBurst Samples Gallery.
While I like creating content for all of these forums, if I had to pick a favorite, I'm going to go with the samples gallery every time. The reason for this is simple. Users can download and directly use the content in the samples gallery. The samples gallery plays host to script packages, CLI scripts, and other tools that are ready to use with WebSphere CloudBurst (of course, one can also extend these or simply use them as reference). Further, the samples in the gallery are mostly direct responses to suggestions or requests I get from users regarding this type of content, thus increasing its usefulness and relevance.
A good example of the kinds of assets in the gallery is the latest script package I put out there. Recently, I was talking to a user and asked, 'What do you do every single time you establish a WebSphere Application Server environment?' He outlined a few different tasks, one of those being the creation of virtual hosts in the server's configuration. The creation of virtual hosts piqued my interest because many users do that, and the configuration logic itself is fairly consistent regardless of the administrator doing the task. Therefore, I set about creating a sample script package that you can use to create virtual host configuration in WebSphere Application Server.
The script package does two things. It creates virtual host entries, and it configures host aliases for these entries. The script allows the user to supply the data for the entries and aliases they want to create via a properties file. The properties file is pretty basic and allows for the configuration of multiple host aliases for each virtual host entry. Here is an example properties file:
The script package parses the data from a properties file like the one above, and it creates the appropriate WebSphere Application Server configuration. If you are using WebSphere CloudBurst and this kind of configuration task is common for your deployments, you may want to download this free sample. I also want to point out that there are quite a few more samples that are completely free for you to download in the gallery. Check them out and let me know what you would like to see in the samples gallery!
When it comes to administration of WebSphere environments, I (and many others) am a big fan of scripting. In my view, any administrative action you carry out with frequency > 1 is ideally suited for a script. The downside to not using scripts (longer configuration times, inconsistent configurations, isolated expertise) is simply too steep in most cases. I also realize that simply saying that you should script is not enough. For some, the learning curve can be a bit daunting. Quite frequently, I talk about our samples gallery or provide posts with embedded scripts in the hopes that I can help flatten out this curve a bit.
While these samples can certainly help to speed up your scripting efforts for certain use cases, they are more or less helpful for solving tactical challenges when scripting. If you and your company are embarking down a strategic path that includes beefing up your administrative scripting capability, I would strongly suggest you look at a resource a few of my colleagues pointed me at recently.
The resource I am talking about is the wsadminlib.py package referenced here. This python script file is a collection of hundreds of methods that carry out common WebSphere Application Server administrative tasks. The authors carefully constructed these methods with clear method and parameter names. The result is a script resource that can become the foundation for your custom-crafted administrative scripts.
I recently downloaded the wsadminlib.py script and began constructing WebSphere CloudBurst script packages to utilize it. To say I am impressed would be an understatement. This file makes so many tasks so incredibly simple. Take for instance the creation of an SIBus. That's just a simple call like the following:
wsadminlib.createSIBus(clusterName, nodeName, serverName, SIBusName, scope, secure)
How about associating a shared library with an application or application module? Another one-line call:
wsadminlib.associateSharedLibrary (libName, appName, warName)
Or what about setting a custom property in the webcontainer? You guessed it. One-line:
wsadminlib.setWebContainerCustomProperty(nodeName, serverName, propName, propValue
This is just an extremely small sample of what the wsadminlib.py includes. As I mentioned earlier, there are hundreds of other methods that carry out various tasks including: installing applications, creating core groups, creating virtual hosts, installing BLAs, creating JMS queues, and much more. If you are looking to beef up your WebSphere Application Server scripting efforts, or if you are just starting, I strongly encourage you to look into and make use of this valuable resource!
I spend most of my time talking with our users about the WebSphere CloudBurst Appliance. While I believe the appliance is somewhat of a hybrid among the Infrastructure as a Service and Platform as a Service layers of the cloud, it is definitely closer to IaaS than PaaS. Users recognize that, and they can identify the capabilities of WebSphere CloudBurst that correlate with IaaS cloud functionality.
That said, I often get questions regarding IBM and work in the PaaS arena. These include questions like, 'Is IBM planning to do anything with PaaS?', 'What is your take on PaaS?', 'What kind of applications do you plan on targeting with your PaaS offering?', and more.
Well, rest assured that IBM is definitely embracing the PaaS movement. Instead of trying to answer these questions in this post though, I want to make you aware of a recent InfoQ interview with IBM WebSphere CTO, Jerry Cuomo. In the interview, Jerry answers the questions above and much more. Jerry talks about IBM's plans for PaaS, what such a platform might look like, and how he sees IBM competing against some of the cloud players in this space.
The interview runs about a half hour, but there is a very nice table of contents that allows you to navigate to specific question/answer segments with Jerry. If you are interested in PaaS, and specifically in IBM's intention in this space, I encourage you to take a look at the interview. Let me know what you think!
Over time, many of our users learn to effectively leverage WebSphere CloudBurst user roles and fine-grained access controls to map activities and responsibilities in the appliance to the appropriate people and teams within their organization. Using these controls, they are able to define actions that a user or group can take, and they can define the set of resources on which they can take those actions. It is efficient, flexible, and an absolute necessity in many enterprise scenarios.
In some cases though, I talk with users that want a little more control, or probably better put, governance over the actions a user can take within a given role. Most often, this need arises when the discussion of pattern authoring comes up. If you want a user in WebSphere CloudBurst to be able to create patterns, you simply give them the Create new patterns permission. Once you give them that permission, the user can create patterns using both virtual image parts and script packages in the catalog. For many of the users I talk with, this approach suits their needs.
However, in some scenarios administrators want a little more insight and control over how the pattern authors build their patterns. Specifically, they want to ensure that patterns contain only approved virtual image parts and script packages. While you can certainly use the fine-grained access controls of the appliance to expose only the 'approved' virtual image parts and script packages, that alone may not be enough. After all, the definition of what is 'approved' may be different when building a pattern for testing purposes versus one built for production purposes. If the same pattern author builds both of those patterns, fine-grained access controls do not help as much. So, what can you do?
Have I ever told you how much I love the WebSphere CloudBurst CLI? It's powerful, easy to use, and a great automation enabler. It is also the perfect tool for our problem above. If you are looking to enforce certain constraints on WebSphere CloudBurst patterns, I strongly recommend using the CLI as a governance tool.
To provide a concrete example of what I mean, let's take a look at a generic pattern checking script I am working on now (I hope to have this in the samples gallery soon). Consider the case that I want to check that all of my test patterns for a specific application environment contain 1 deployment manager and between 1 and 3 custom nodes. In addition, I want to make sure that the parts for these nodes come from an approved virtual image, and I want to verify that the deployment manager contains the correct application installation script package. With the script I am currently writing, you would start by encapsulating this information in a properties file.
PatternAssertion_1=Customer Processing Test Environments
PatternAssertion_1_Requirements=Deployment manager:1:415:Install customer process app;Custom nodes:1-3:415
In the above, the PatternAssertion_1 key provides a name for the pattern verification assertion. The PatternAssertion_1_Requirements key provides the requirements for the pattern. The above requirements indicate that for a pattern to meet the assertion, it must contain 1 deployment manager part from the virtual image with reference number 415. In addition, the deployment manager must contain a script named Install customer process app. A valid pattern must also contain 1 to 3 custom node parts, also based on the virtual image with reference number 415. When done defining my requirements in the properties file, I simply invoke a script and pass in the file. As a result, I get information about which patterns satisfy or do not satisfy the assertions. For example:
The Customer Process Application pattern satisfied the requirements of the Customer Processing Test Environments assertion.
OR The Customer Process Application pattern did not satisfy the requirements of the Customer Processing Test Environments assertion
due to the following reason: The pattern is required to have a minimum of 1 and a maximum of 3 Custom node part(s), but it had 4.
As I said, I hope to have this sample script posted to the samples gallery soon. I am going through some final revisions and enhancements that I hope make it better and more generally applicable. In the meantime, I wanted to point out that pattern governance is indeed doable, and in fact not very hard to achieve with the CLI. I will be sure to post an update when the sample script is ready. In the meantime, let me know if you have any questions or comments.
In the course of my job, I am lucky to be able to work with both enterprise users and business partners who are adopting and using the WebSphere CloudBurst Appliance. When it comes to the business partner camp, one of my absolute favorites is the Haddon Hill Group. The Haddon Hill Group is an IBM Premier Business Partner, and they have been an early adopter and vocal advocate of the WebSphere CloudBurst Appliance. They have extensive knowledge of the use of the appliance in enterprise accounts, and quite frankly, they are doing some really cool things with WebSphere CloudBurst.
Given the above, I was glad to see summarized results from their various implementations made available recently on the IBM site. The summary is fairly concise, so I encourage you to take a look at the results Haddon Hill Group is getting with WebSphere CloudBurst.
I am not going to rehash the contents of the results here, but there are a couple of things I want to call out. First off, Haddon Hill Group says that WebSphere CloudBurst can provide companies with a '100 times faster time to market' delivery experience. In a practical sense, this means reducing the amount of time to deliver WebSphere environments from 40-60 days on average to just hours. That is an eye-opening data point!
The other thing I want call out here is a quote from Phil Schaadt, President and CTO, Haddon Hill Group. I have had the pleasure of working with Phil and team, and I have heard him echo these same sentiments many times:
"The important thing about the IBM WebSphere CloudBurst Appliance is that it will dispense a WebSphere Application Server image onto your WebSphere Application Server environment or private cloud along with other products within the WebSphere stack, and that application server will be ready in a few minutes. You can do it in a clustered environment, and you can even roll out IBM WebSphere Process Server and get it right in a fully clustered environment with a database connection, in about 90 minutes. You can also easily manage all the configurations of IBM WebSphere Process Server that you need. All the steps that took up so much time and effort on the part of IT staff have been removed. The savings for companies with large WebSphere implementations can be in the millions."
It is always great to see clients putting our technology to use to produce tangible business value. Again, I encourage you to take a look at these reports. As always, I am eager to hear what you think, so leave me a comment or reach out to me on Twitter @damrhein.
A couple of weeks ago, I wrote about a sample I was working on that would allow one to apply a layer of governance to their WebSphere CloudBurst patterns. Earlier this morning, I posted the sample to the WebSphere CloudBurst Samples Gallery under the 'Sample CLI Scripts for WebSphere CloudBurst' section. The name of the new sample is 'Check WebSphere CloudBurst patterns', and you can download it here.
As hinted in my earlier post, the new sample is a simple way to check your patterns against assertions you supply in a properties file. It allows you to check that patterns contain the correct parts and scripts, and it allows you to verify that they were built from valid images. The assertion format is pretty basic, but it should be flexible enough to allow you to check patterns against a wide array of requirements. The sample archive includes a readme file that explains exactly how to use the script, and it contains a sample assertions file to give you an idea of the input syntax.
I hope this helps to address some of the requirements of many WebSphere CloudBurst users that told me they were in need of a way to apply governance to their patterns. If you have any questions about the sample, please let me know. Alternatively, if you have another idea or a problem you would like to see addressed by a sample in our gallery, please let me know.
I spent most of my time growing up doing two things, going to school and playing sports. I made many fond memories -- mostly from the latter :) -- and learned more than a few lessons over that time. Of all of those lessons, there was one in particular that stuck out in both the classroom and on the baseball diamond: Sometimes you have to get back to the basics.
In that vein, I think it is time to revisit the basics of WebSphere CloudBurst. In revisiting the basics, I am not talking about the technical basics of the appliance. Rather, I am talking about revisiting exactly why WebSphere CloudBurst exists in the first place. In other words, let's take a look at the problem domains WebSphere CloudBurst addresses, and let's discuss a little bit about how the appliance does so.