nimadm - multibos error!?
cggibbo 270000TMUJ Comments (9) Visits (22005)
I’ve been working with a customer recently on an issue with nimadm. They were attempting to migrate a system from AIX 5.3 to 7.1 using nimadm. The NIM client AIX level was 5.3 TL12 SP4 and the NIM master was running AIX 7.1 TL1 SP1.
lpar1 : / # oslevel -s
root@nim1 : / # oslevel -s
They were running the following nimadm command:
# nimadm -j nimadmvg -c lpar1 -s spotaix710101 -l lpp_sourceaix710101 -d hdisk1 -Y
The nimadm operation would always fail at phase 11:
We also found the init_multibos
error in the /var
Tue Nov 22 14:48:12 EETDT 2011
alt_disk_copy: 0505-218 ATTENTION: init_multibos() returned an unexpected result.
Given that the error appeared to be related to init_multibos, we assumed the failure was due to some multibos checks being performed by alt_disk_copy on the client. The client system did not have an existing multibos standby instance. So, we tried two things: First we created a standby instance on the client (multibos –s –X) and re-tried the nimadm operation. This failed. Next we removed the standby instance (multibos –R) and re-tried the nimadm operation. This worked and the client then migrated to AIX 7.1 successfully. We re-tried the same operations (i.e. create standby instance, remove standby instance & nimadm) several times and each worked as expected.
So it appeared that the unofficial work around to this problem would be to create and then remove a standby multibos instance prior to the nimadm migrate. However, the customer has over 200 LPARs that they need to migrate to AIX 7.1. If possible they would really rather avoid this extra step in the AIX 7.1 migration plan. We’ve made contact with IBM support and are hoping they can assist us in identifying the root cause of the issue and provide us with an official solution to the problem.
And just yesterday we hit the same problem when migrating from AIX 6.1 to 7.1 using nimadm. I’ll update my blog with any progress we make with this problem. In the meantime, our unofficial work around will get us “out of hot water”!
UPDATE (14/12/2011): The simple fix is to remove the /bos_inst directory before attempting the AIX migration. i.e.
# rm –r /bos_inst
In my nimadm article I wrote:
Confirm the legacy LV names are now in use that is, not bos_.
Remove the old multibos instance.
Unfortunately, it appears that ‘multibos –R’ may not clean up the /bos_inst directory. If this directory exists the nimadm operation will most likely fail.