How to Mass Change LPAR CPU Pools on POWER Systems
brian_s 270002K5X3 Visits (4837)
I recently received an email from someone who said they needed to change the CPU Pool on hundreds of LPAR's and they asked if I had any suggestions to make the process easier.
There are a couple of ways this could be automated. One option might be to create a script that would generate the commands needed to make the change. But what I would probably do in this instance is just use a spreadsheet and a specially crafted formula to generate the command needed to make the change.
Basically, you create a spreadsheet with 3 columns:
Column A: LPAR Name
Column B: Frame Name
Column C: Desired CPU Pool
Column D: Our special formula to generate the commands
The formula in Column D needs to be something like this for Row 2 of the spreadsheet:
This formula builds the command line by pulling out the LPAR Name, Frame Name, and CPU Pool names out of columns A, B, C in Row 2 (Row 1 being a header).
You then go down to the bottom right of the formula cell, until your mouse turns in to a cross, then click and drag the formula down in to all of the cells below it in column D. Now you have your formula setup in Column D all the way down the spreadsheet, and you just need to fill in columns A, B, and C with your LPAR, Frame, and CPU Pool details. Then simply copy/paste the generated commands in to your HMC to make the changes.
The commands generated by the formulas look like the lines below. Basically it is the command to DLPAR change the CPU pool, followed by a command to force overwrite the current profile with the running configuration so that the CPU pool change gets updated in the profile as well: