Modificado el por ScottWill
In one of my blog postings just over a year ago I suggested that mature teams may not need to use Story Points. However, at the end of that post, I wrote:
[If] your team is fairly new to writing and sizing User Stories, or if your team doesn’t yet have an established velocity, I would recommend sticking with Story Points for now because the process of assigning Story Points (during a Planning Poker exercise, for example) is *very* helpful in aligning a team’s thinking, as well as building team synergy, as the team goes through the process of having the discussions that naturally arise when sizing stories.
(You can read the full post here: link)
What I’d like to do with this post is cover a few issues on how to make sure you’re getting the most out of using Planning Poker.
First, keep in mind that Planning Poker is meant to be a very simple and quick process to be used by a team for assigning Story Points to a given story. It’s not meant to provide absolute precision regarding the assignment of Story Points, and the assignment of Story Points itself is meant to be relative to the sizings given to other User Stories on your team’s backlog.
Next, because Planning Poker is an estimation technique please don’t assume that everyone on the team must be 100% in agreement with the number of Story Points being assigned to a given Story. Let me explain: typically, when a team uses Planning Poker to assign Points to a User Story, there will be a smattering of “votes.” As an example, let’s say that, after the very first vote for a given Story, there are a couple of 3's, a 5, a couple of 8’s, and a 13. The scrum master should ask why folks who voted 3 thought the size was relatively small, and then ask the person who voted 13 why he thought the size was relatively big (i.e., over 4 times the estimated size of those who voted 3). After a brief discussion, the scrum master should ask for the team to vote again. Let’s say this time there’s one 3, several 5’s, and a couple of 8’s. A good scrum master should say something like, “OK team, let’s go with a 5 for this story and move on to the next story on the backlog.” What the scrum master is looking for is “harmonic convergence.” Notice how, in the second vote, there were fewer 3’s and the 13 went away. The bulk of the votes were gravitating towards a 5, and so you can see the team is getting closer (“converging”) on a given number. Good enough! Don’t waste time by voting again, and again, and again, and again (ad infinitum and ad nauseum) until the team members all vote the same – it’s not worth it. Estimation is not meant to be precise, and spending more and more time trying to be precise with estimates is a waste of time.
And here’s the main point that I’d like to make – let’s say you’re one of the team members who voted an 8 for this story even though the number finally assigned was a 5 – should you be upset? Should you start an argument? Should you want to keep voting until everyone agrees with you and assigns the Story an 8? No, no, and no. Even though you may really think the story should have been sized at an 8, you can see the team was converging on a 5, so just let it go and press on. Planning poker is not a contact sport.
Finally, once teams get the hang of Planning Poker, most of them vote no more than twice on any given story, and they usually don’t spend more than just a couple of minutes per story. Here’s the high-level process:
Step 1. If you've not assigned Story Points to any User Stories on your backlog then, as a team, quickly pick out what you all think is the smallest story on the backlog and automatically assign it a 1. All other Stories on the backlog will be sized relative to this Story.
Step 2. Grab the next User Story from the backlog.
Step 3. Have a brief discussion about the Story regarding the anticipated effort relative to the first story (the story itself should be familiar to the team since, if the writing of the Stories was done correctly, the team participated together in the writing of the given Story).
Step 4. Vote.
Step 5. If there appears to be a fairly strong consensus on a given number, go with that number, and then go back to Step 2….
Step 6. Otherwise, if there’s a fair amount of disparity in the votes cast, then have another brief discussion focusing on asking those who voted with the lowest number, and those who voted with the highest number, to give some insights into their respective thinking.
Step 7. Vote again – you’ll likely see some harmonic convergence on a specific number after the second vote, and then just go with that number. Now go back to Step 2 (lather, rinse, repeat)….
In sum, Planning Poker is a great technique to use to quickly assign Story Points to your User Stories. Just be sure that the team doesn’t over-engineer its use.
As always, please feel free to ask questions and share your experiences. Leslie and I look forward to hearing from you!
Modificado el por ScottWill
A lot has been written about how many of the agile practices contribute to helping teams and organizations become more efficient. And this is no surprise since agile is built on top of many of the Lean principles that helped manufacturing become much more efficient.
In addition to the tremendous impact adopting agile practices can have on efficiency, another benefit (and one that doesn’t get quite as much “press”) is the reduction of risk that accompanies agile.
First I’d like to address how risk is significantly reduced by adopting the agile practice of “small batches.” When teams move to coding/testing/deploying small batches of functionality on a regular basis, they typically find defects much earlier than they would have had they still been using large batches. Many of you will likely recall the old waterfall days when tens of thousands of lines of code were written before the first test against the code was ever executed. Back then, when testing began, typically large numbers of defects were found in a short period of time and it would take a very long time to get the list of defects fixed. With the adoption of small batches, defects are often found within minutes of the code being checked in and the impact of any defect that is found, as well as the impact of the time required to fix the defect, is minimal since the code is fresh in everyone’s mind, and more code hasn’t been written that gets in the way of actually fixing the defect. The risk reduction is significant on just this point alone.
Another risk-reduction benefit of adopting small batches is the ability to get faster feedback from customers due to the fact that the new functionality is made available much faster than it would be if lots of different functions were packaged together into a big batch and released/deployed only once in a while. If a team puts out a small improvement, or a new feature, and gets feedback from customers that it doesn’t meet their needs, then the team has gained some valuable insights very quickly and their current investment is small. With large batches, if customers don’t like something, the team won’t know about it for quite some time because of the length of time from when the feature was built to when it was released/deployed along with all the other features in the big batch. Big batches are very risky due to the delay in getting feedback, as well as the increased costs of making changes (just think of all the additional testing that would have to take place if a change needed to be made and the batch contained ten features vs. just one feature).
The last risk-reduction benefit of adopting small batches concerns the pressure to add features. If only large batches of features are released infrequently, then typically product management wants to cram as many new features as possible into the current plan because, if the additional desired features don’t make it into the current plan, then it could be a very long time until the next plan is completed and the additional desired features are finally made available. Adopting small batches allows for continual re-ranking of the backlog of requested features based on customer feedback, new technologies, and market conditions, thus significantly reducing the pressure to cram tons and tons of stuff into a “big batch plan.”
Another agile practice that results in a significant reduction in risk is the adoption of “whole teams.” By “whole teams” I’m referring to teams that are comprised of cross-discipline and cross-functional responsibilities. While this is certainly nothing new in agile, understanding how adopting a whole team approach can reduce risk is something that doesn’t get discussed much. For example, when team members used to go off into their own little silos for months on end, and rarely interact with other team members, it was very difficult for anyone on the team to have any insight into what was being done by anyone else. And if one of the team members suddenly had to be away for a period of time (e.g., due to an illness or a family emergency), it was almost impossible for anyone else on the team to immediately pick up that person’s work.
With whole teams, not only is there regular communication and sharing of knowledge, but if a situation comes up where someone does have to be away for a lengthy period of time, the impact of the absence will be far less than it would be otherwise because others on the team will have a much better understanding of the work that person was doing and will be able to pick up the work with much less difficulty – thus reducing risk.
In conclusion, I would urge teams to include a focus on risk reduction as part of their regular reflections – it’s part of agile’s focus on continuous improvement.
Please feel free to comment on other areas that you’ve seen where adopting any of the agile practices has led to a significant reduction in risk. Thank you!
Modificado el por ScottWill
I have been a strong advocate over the years of using Story Points to track team velocity. In spite of many of the self-inflicted problems teams face when using Story Points (e.g., trying to initially assign some measure of time to a Story Point, or trying to normalize Story Points across teams, or confusing Story Points and task-hours, etc.), when used correctly, Story Points (and the velocity calculations they enable) make project tracking and projection incredibly easy and relatively accurate as well. (As a side note, check out the following article by Jeff Sutherland: link.)
What I’d like to cover in this posting is that using Story Points is not the only way to track a team’s velocity. For teams that have been writing User Stories for a while, and who have gotten good at breaking their work down into small enough chunks such that one or more stories can be completed (“Done!”) in an iteration, I would like to recommend that they forego the effort of sizing User Stories with Story Points. They’ve already shown that they know how to start with an Epic, and break an Epic down into User Stories that can be completed in an iteration. Thus, they’ve demonstrated that they have a relative amount of uniformity in the way that they come up with their backlog of User Stories – their stories are all in the same range regarding the amount of time and effort required to complete each one of them.
With that in mind, such teams could simply measure velocity based on completed User Stories – the principle is the same as Story Points, but mature teams can fore-go the effort required to size each User Story with Story Points (e.g., through Planning Poker).
Let me give a couple of examples – the first one using Story Points. Team A has 50 Story Point’s worth of User Stories on its backlog, and they’ve demonstrated over the course of time that they can generally complete about 10 Story Point’s worth of stories in an iteration (velocity = 10). In order to determine how long it will take to complete the remaining stories, it’s easy to divide 50 by 10 and come up with an estimate of around 5 iterations. If a customer is asking how long before the team can get to a feature that the customer is interested in, and the User Story associated with that feature appears about 30 points down the rank-ordered backlog of stories, then the team can tell the customer that it will be about 3 iterations (30 divided by 10).
The second example is that Team B has 10 stories on its backlog and they’ve demonstrated that they typically complete about 2 User Stories every iteration (velocity = 2). To determine how long it will take to complete the remaining stories, divide 10 by 2 and come up with an estimate of 5 iterations. If a customer is asking how long before the team can get to a feature that the customer is interested in, and the User Story associated with that feature appears about 6 stories down the rank-ordered backlog of stories, then the team can tell the customer that it will be about 3 iterations (6 divided by 2).
If you’re part of a fairly experienced team, and if your team already has an established velocity, consider trying this approach in lieu of assigning Story Points – it can help save some time by not going through the sizing exercises. However, if your team is fairly new to writing and sizing User Stories, or if your team doesn’t yet have an established velocity, I would recommend sticking with Story Points for now because the process of assigning Story Points (during a Planning Poker exercise, for example) is *very* helpful in aligning a team’s thinking, as well as building team synergy, as the team goes through the process of having the discussions that naturally arise when sizing stories.
As always, please feel free to comment, provide suggestions and recommendations, or even tell us about your experiences using Story Points and/or other ways of tracking velocity. Thanks!
Modificado el por ScottWill
Leslie and I will be hosting a webcast entitled, How Do Agile Teams Keep From "Waterfalling Backward?" as part of the Global Rational User Community (GRUC) webcast series.
"Waterfalling backward" describes the situation where a team that has started down the Agile path reverts to waterfall ways of thinking when difficult situations arise. We'll cover some examples of what "waterfalling backward" looks like as well as several easy-to-adopt techniques that help teams re-align with Agile if they've started "waterfalling backward."
Note that three attendees will win a copy of our book, Being Agile!
Register here: https://attendee.gotowebinar.com/register/113940558500710914
We are looking forward to the session and hope you can join us!
Modificado el por ScottWill
One of the things that has been extremely popular in software organizations for a long time is to count the number of defects that have been found via testing. I propose that teams no longer do this for two reasons.
First, one of the lines of thinking behind counting defects is that it is somehow a measure of quality. If we were running an assembly line in a manufacturing plant, and the assembly line didn’t change from one week to the next, but the number of defects increased, we would know there was a quality problem somewhere – something on the assembly line was likely broken. Despite some similarities, software development is not an assembly line – unlike an assembly line, every line of code that is written and tested has never been written or tested before, so expecting defect counts to be an indicator of quality doesn’t correlate. If a team found 25 defects last week, and 50 this week, what does that tell us? Is the code quality really getting worse, or did the team just do a lot more testing? If so, did the tests executed reflect real-world usage, or were the tests all edge-cases? Did the team deploy the code into a new environment that had never been used before? I’m sure you can come up with many more scenarios… Anyway, the possible reasons for the higher number of defects this week are almost boundless, and the time spent trying to determine why the variation occurred would be better used to: work more with customers to better understand their usage patterns and particular needs; create more needed functionality; improve their processes further; cross-train team members; adopt a new tool; etc., etc., etc. All of which leads to my second point…
Agile software development has its foundations in Lean Thinking, and one of the Lean principles is to eliminate waste. Does counting defects, and spending time trying to figure out what causes variations in the numbers of defects from one time period to the next, contribute directly to the success of the project? If not, then the time spent doing so should be viewed as a waste – time that could be better spent doing more important work.
In conclusion I’d like to leave you with two thoughts regarding defects: first, when defects are found, they should be fixed immediately – period. Don’t allow a backlog of defects to accrue. If it does make sense to do some root-cause analysis to determine why a particular defect occurred, then that’s fine – do so when it makes sense to do so, but it likely does NOT make sense to do so for the vast majority of the defects found. And the second point is that a mature, Agile team should be able to have “difficult” conversations when needed: “Hey Scott, I’ve noticed that I’m finding a lot of defects in your code this week – is there anything that’s distracting you, or anything I can help you with?” Instead of taking umbrage at such comments, I should be thankful that my team is willing to raise the issue and have the discussion.
So, the next time you’re asked to track the number of defects found, ask “Why…?” The answer will likely shed light on ways to eliminate waste and help overcome the “That’s the way we’ve always done it!” mentality, as well as foster a relentless, continuous improvement mindset.
As always, thoughts, comments, and questions are most welcome! Thank you!
I recently read a fascinating article in a farm journal that made me think about software engineering. You are likely thinking that there’s not much that farming and software engineering have in common and, for the most part, you’re right. However, in this particular instance, the story relates directly to typical practices in the software industry today.
The article told the story of a group of research scientists who had spent years working with bell peppers. The scientists embarked on a program to cultivate peppers that were more disease resistant, could flourish under sub-optimal conditions such as poor soil, limited water, & lack of full sun, and that would also produce greater numbers of peppers than the original.
After quite a bit of time, effort, and funding they managed to achieve some moderate success. Then someone suggested that they take some of their latest crop of peppers to a local restaurant and get some input from one of the chefs. While the article didn’t go into specifics about the chef’s reaction, it was clear that the reaction was akin to throwing the pepper in the garbage and suggesting that the scientists could have spent their time better elsewhere. The one thing that mattered most to the chef – the taste of the pepper itself – had not even been considered as one of the criteria to be taken into account by the research scientists. The scientists got caught up in their own little world of science and totally forgot that peppers were food and not specimens.
This immediately reminded me of the software industry and how so many teams have forgotten why they’re creating software. It’s not to simply write code, or execute test cases, or try out some new tool, or deploy a capability to a website – the software should ultimately meet customers’ needs. And the best way to do that is to work directly with customers as the capabilities are being created to ensure what’s being developed meets their needs.
Fortunately, the move to Agile and DevOps is making it much easier to work with customers due to the practices of continuous development and continuous deployment, as well as an intense focus on customer engagement and the monitoring of customer usage of the offerings.
The moral of the story…? Don’t forget the customer! J
Modificado el por ScottWill
Just like the drip, drip, drip of a leaky faucet, we lose productive time by being regularly distracted. Some distractions can't be eliminated, but many can... I recently wrote an article for InformIT that was adapted from one of the chapters in the book that Leslie and I co-authored entitled Being Agile. The article discusses a pervasive form of regular distractions that many people have taken for granted nowadays. I thought I'd pass along a link here:
I hope you enjoy the article and that it provides some food for thought... As always, comments and questions are welcome. Thanks!
Modificado el por LeslieEkas
Short feedback loops are one of the key benefits to the success of agile because they enable teams to learn fast and adjust. This technique is leveraged in numerous practices used by agile teams including the daily standup, sprint demos, code checkin, build and validation cycles, pair programming, and continuous delivery. One of the key benefits that convinced me to try agile was its claim to deliver greater value with higher quality. After I had experimented with agile for a while, I started to understand just how critical short feedback loops are to achieve these goals.
Short feedback loops enable you to learn fast so that you can adjust while the costs are low. It has been well understood in software development that the cost to fix a defect increases and in many cases increases dramatically the longer you wait to fix it. Some of the reasons are that more code may have been added making the defect more complex to fix, the new code requires additional testing and fixing, and by the time you get to the fix, you may have lost familiarity with the code in question. To combat this issue, it is critical to find defects soon after the code is checked in. One short feedback loop used to combat this is to automatically test the code through a series of progressive test gates. Additionally if the code is checked in frequently (another short feedback loop) developers get quick feedback on quality.
Another manifestation of short feedback loops is the daily standup which enables teams to identify critical blockers and get help to get them fixed before the next meeting. Someone has a problem, someone jumps into help fix it. Shorten the time to fix a problem; reduce the cost.
To ensure that agile teams are meeting the needs of their customers, they demo their new work at the end of each sprint to get timely feedback. This version of a short feedback loop is fairly well known to agile teams but it may be surprising how few teams actually do these with their end users. These demos give the product users ongoing updates on how the new code is progressing and the opportunity to provide feedback. This kind of feedback is like bug fixing, the sooner it is applied the more cost effective it is. Going a step further, releasing functionality frequently enables users to get traction and provide feedback before the functionality is complete. Customers have to be willing to experiment and respond but the win for them is that they do get an active voice in getting the value they require.
As teams continue their agile adoption, it is useful to remember why we adopt various techniques to make sure that we get the value promised. To deliver higher value with better quality we use short feedback loops so that we learn fast and adjust.
Modificado el por ScottWill
You might recall that I ended the last blog post with the following:
One thing at a time, one thing at a time, one thing at a time…
Why are we so convinced that this is the best way to work? Hopefully my previous post made it clear that the flexibility teams have to respond to changing circumstances by working on one thing at a time is an excellent benefit. There are additional, significant benefits to working on one thing at a time – two of which I explore in this post.
How do you know that what you’re creating will do well in the marketplace, meet customers’ needs, and generally provide high customer satisfaction? In the old, waterfall days we used to have “beta programs” where customers would be granted access to some pre-release version of the software that they could use in-house and then provide feedback. The biggest problems with beta programs revolve around the lateness of the feedback received from customers. Typically, if customers didn’t like something, or wanted something different, it was too late to make any major changes – the team was too busy fixing the backlog of defects, and the committed ship-date was often very close when the beta program started. Customers were often told, “We’ll get to that in the next release.”
However, by doing one thing at a time, your team has a much greater opportunity to understand, with a fairly high degree of certainty, that what you’re creating will meet customers’ needs. And the reason this is so is that you can involve your customers in your project throughout the entire lifecycle. When the team completes a small feature, or completes even a small part of a larger feature, that feature can be demo’d to customers. It’s common for agile teams to be demo-ing some completed functionality to customers at the end of their very first iteration. And customers love it! It gives the customers the ability to “put their fingerprints” on the product – they get to see what’s being built, provide immediate feedback, and then see the development organization respond quickly to that feedback. In other words, customers are able to provide real-time, on-going feedback so that when the product finally does ship, customers will be very comfortable in knowing that the product provides what is actually needed.
One other benefit is that customers can actually request that the product be made available earlier than planned. Say, for example, a team plans on three major features for its next release. By working on one feature at a time, it’s quite possible that customers could ask that the product be released as soon as the first two features are complete – or even just the first one! If the feature is needed, and customers can see how they can immediately make use of it, and the team has actually completed the feature, then releasing just the very first feature (instead of waiting until all three planned features are complete) may make the most business sense. But the ability to even have such a business discussion is only possible if one feature at a time is being worked on. If all three features are started in parallel, then the team has created inflexibility since nothing can ship until all three features are completed (yes, dark launches address this problem, but the additional overhead of ensuring what’s “dark” doesn’t interfere with what’s been completed must be considered).
So, to sum up, how do you know? You know because your customers are providing you real-time, on-going feedback throughout the project to help ensure that what you deliver is what they need. It’s a win-win situation for everyone!
Modificado el por ScottWill
Years ago, waterfall projects would typically shun requests for new features or capabilities being added to a project that was underway. After all, project success was typically measured by conformance to “the plan” – and a new request was not part of the plan. These waterfall teams would complete the opening sentence something like this, “When we get a new feature request, we put it on our list of features for consideration in the next release.” Thus, an opportunity to respond to changing conditions, changing customer needs and expectations, or changing competitive situations in a timely manner was lost.
Other waterfall projects have tried to add the new feature in along with the work that was originally committed in “the plan,” but that would often spell disaster since teams were typically already working feverishly just to meet the original commitments. In order to add something else to an already booked plan, there were very few options – mainly overtime and/or cutting corners – neither of which is a good thing. Oh, sure, there was always a planned “buffer” added into “the plan” to account for such contingencies, but when have you ever seen it work out the way it was intended? The skeptic in me would guess rarely, if ever… These teams would complete the opening sentence something like this, “When we get a new feature request, we add it to the plan and start mandating extensive overtime.” Pretty soon, employees are burnt out, frustrated at not having a life, and begin to actively seek employment opportunities elsewhere.
Mature agile teams complete the sentence something like this: “When we get a new feature request, we see it as an opportunity to get ahead of the competition as well as make our customers happy and successful.” Typically new requests surface because of changes in the competitive landscape, changing customer needs and expectations, new market opportunities, or even some combination of these and other factors. And when these new requests arrive at the door of an agile team, there’s no drama at all, no worries about overtime, no cutting corners, no consternation about not meeting “the plan,” etc. Agile teams have great flexibility to handle new requests because they are always working on just one thing at a time – not numerous features in parallel. Waterfall teams typically worked on lots of features in parallel since all the features were committed up-front and since teams typically had to show progress on all the committed features from the very beginning of the project. Thus, if a new request arrived, there was no flexibility to drop a less important feature from the plan since everything was already underway.
Agile teams, however, work on one thing at a time. And the way they do this is by having the features rank-ordered from the most important to the least important. If a new request arrives, the team finishes working on the feature currently in progress – it then has complete freedom to begin working on the brand new request. If a particular ship-date has to be met, then the team drops the least important feature from the list and replaces it with the new request. This way, the team is always working on the most important feature and has incredible flexibility to handle changing circumstances. After all, conformance to “the plan” is not the right measure of success – meeting customer needs and adapting to changing market conditions is a much better measure of success.
To summarize, working on one thing at a time (always the highest-ranked, most important item) and getting it done before starting on something new is the most efficient and effective way to work. It also allows for the greatest flexibility – especially in markets where changes can occur lightning fast.
One thing at a time, one thing at a time, one thing at a time...
Modificado el por ScottWill
In my previous post I mentioned how to use end-of-iteration reflection meetings to determine what a team should focus on for improvement in the next iteration. In this post I want to briefly cover two different ways that a team can tackle those improvement actions.
In the first – and simplest – case, let’s say a team needs to fix a problem with their automation framework that is causing some instability. So far, the team has just addressed the immediate symptoms in order to get the automation back up and running, but there’s a sense within the team that the problem runs deeper and needs some focused effort. In this case, the team needs to set aside some dedicated time during the next iteration in order to solve this problem at its root so that it doesn’t keep coming back time and time again, and continually costing the team. Some teams I’ve worked with have simply written a user story and put it on their backlog of user stories to ensure that the dedicated time actually occurs. In this case, the story goes to the very top of the backlog – the team addresses it at the outset of the next iteration (since it’s now #1), fixes their automation problem, and only then starts working on the next story on their backlog. Whether you choose to write a user story or not is up to you – the KEY is that you set aside time to handle smaller issues.
The second case involves larger problems – problems that will take time to solve and that can be quite complex. A simple example of this may be that the automation framework that the team has been using for years may no longer be supported, and now the team has to move to a brand new automation framework. This undertaking isn’t going to be able to be handled in a day or two – even with the whole team focused on helping. Since there’s always pressure to get new features and functionality out the door as quickly as possible, the team most likely isn’t going to be able to hit the “pause button” for four weeks while they switch over to the new framework. What we suggest here is a bit of a compromise: create a small team of automation folks and dedicate them 100% of the time to moving the current automation to the new automation framework. The remaining team members continue to focus on new feature work. The important thing with this suggestion is that you’re getting your new automation framework implemented while still getting new feature work completed (albeit at a somewhat slower pace) – but you’re doing so without having engineers multitask across different sets of responsibilities. This approach honors the lean principle of working on one thing at a time.
Just to recap – if your tackling a small improvement action, dedicate time. If it’s a larger improvement action, dedicate a team.
As always, please feel free to respond with any additional advice, insights, experiences, and/or questions that you may have. Thanks!
“If you’re not better this month than you were last month, don’t tell me you’re Agile!”
I forget exactly where I heard that quote but it was from someone well known in the industry that came up during a webcast I was listening to several years ago. It caught my attention and helped me start to focus more on why Continuous Improvement is considered a foundational principle of agile. My research led me back to the Agile Manifesto, specifically to the principles of the Agile Manifesto where one of the principles reads:
“At regular intervals, the team reflects on how to become more effective, then tunes and adjusts its behavior accordingly.” [emphasis added]
No doubt you’ve heard of, and hopefully engaged in, regular reflections (sometimes called “retrospectives”). If you haven’t done so, or have tried them and not gotten much value, then I’d like to provide a few ways to help make them valuable and to help you and your organization adopt a Continuous Improvement mindset. Conversely, even if you do regularly hold reflections and find them useful, the hope is that the following is something else you can add to your “bag of tricks” and make them even more valuable and compelling.
First, we recommend that reflections occur at the end of every iteration. These meetings are team meetings and shouldn’t take more than an hour (a half-hour seems to be fairly typical in our circles).
Next, the meetings are not meant to be “gripe sessions.” Yes, sometimes a little bit of griping can be cathartic, but the goal of a reflection meeting is more than just walking away happy that you had the chance to vent your spleen… The goal is to figure out a way to improve between now and the next reflection meeting.
The meeting facilitator should just go around the table and ask everyone to list the pain points that they’re facing. The facilitator keeps a list of all the pain points brought up and, after the last person has spoken, shows a list of all the pain points raised – ranked from those with the highest number of mentions down to those with the least. The item at the top of the list is what the team focuses on since that is the one that is having the biggest negative impact on the team.
Now that the biggest pain point for the team has been identified, the team brainstorms on some specific actions to take to improve in that one area and includes those actions as part of the iteration plan for the next iteration.
At the end of the next iteration, during the reflection meeting, the team determines whether that pain point has been resolved. If not, the team brainstorms on some additional actions to take in the next iteration. The key here is to NOT start trying to solve another pain point until the first one has been solved to everyone’s satisfaction. Once the biggest pain point has been solved, only then should the team move to the next biggest pain point on the list. Lather, rinse, repeat every iteration – and soon Continuous Improvement will be the norm…
I’ll have some additional suggestions in the next post. In the meantime, please comment on your experiences with reflections, as well as on any helpful practices you’ve discovered. Thanks!
Modificado el por ScottWill
Just a quick plug for the upcoming IBM Rational Innovate Software Engineering Conference next week in Orlando at the Disney Swan & Dolphin Resort. I'll be leading the Agile Track Kickoff Session on Monday, 2 June, at 11am, and following that up with a book signing from 12noon to 1pm at the book table. It promises to be a great conference again this year! Please stop by and say "Hi!" if you'll be attending!
Main conference website: http://www-01.ibm.com/software/rational/innovate/
Agile Track Kickoff Session: https://www-950.ibm.com/events/global/innovate/agenda/preview.html?sessionid=DAG-2459
Podcast (12 minutes) covering the Agile Track: http://public.dhe.ibm.com/software/info/television/swtv/Rational_Software/podcasts/rttu/gist_moore_innovate_scaleagile_enterprise-2014-0520.mp3
Thanks -- and hope to see you there!!
Modificado el por ScottWill
No doubt you’ve already heard about DevOps. What you may not be aware of is how DevOps builds on Agile principles and practices. For example, Software-as-a-Service (SaaS) projects have adopted DevOps in order to have the ability to frequently update their websites with additional features and capabilities. Some SaaS offerings are updating their production websites multiple times a day – which is a far cry from the once-a-year-release cycle that was rather typical for products built using waterfall.
You might be thinking to yourself, “Multiple times a day…? How does that happen…?” I’ll touch briefly on three essentials of Agile that contribute to this capability. The first is breaking work down into small batches and completing one small batch of work prior to moving to another. You’ll no doubt recognize this as a Lean principle derived from queuing theory. Simply stated, Lean has shown that small batches of work transitioning through a system are far more efficient than an occasional big batch of work. For our purposes, this means that having small amounts of code written, tested, and automated, where any defects have been fixed, and where any necessary user-documentation has been written, is far more efficient and productive than just having a large batch of code written that hasn’t been tested or documented.
The second point is Agile’s emphasis on “working software as the primary measure of progress” (see the 7th Principle of The Agile Manifesto). This ties in directly with the previous point – as small amounts of code are written, the goal is to get that code to production-level status as quickly as possible (“working software” that is “Done!”) so that the new code can be provided to customers with high confidence that it will work as desired, have the right level of quality, and help customers address a particular need.
The last point regards the tremendous emphasis in Agile on automation. With DevOps, the need for automation increases significantly because of the desire to deploy new features and capabilities on such a short timetable. Not only are builds and testing automated, but test environments are automatically provisioned, code that passes the automated test suite is automatically deployed into production and, if a problem occurs anywhere along the way, the process is stopped, the code is automatically rolled back, and appropriate personnel are automatically notified of the problem. The ultimate goal is to make a small code change, “push a button,” and have the new feature or capability automatically rolled out without any further human intervention.
No doubt you can tie additional Agile principles and practices to the DevOps initiative, but I thought I’d touch on just these few to show how DevOps is nothing more than a logical next step after Agile – they are not two, independent approaches to building software. As always, please feel free to share your thoughts! We look forward to hearing from you!
Modificado el por ScottWill
When a project is big enough to have two or more teams working on the same project, we recommend that each team have its own backlog of User Stories and each team size its own stories with Story Points. Of course, this inevitably raises the idea of having each team conform to some “story point standard” so that project progress and team progress can be tracked "uniformly." Doing this more or less means that teams have to normalize story points across all the teams so that, for example, a 5-point story for one team is the same as a 5-point story for every other team on the project; an 8-point story is the same for every team, etc., etc., etc.
All I have to say to this idea is: “Ugggghhh… What a collosal waste of time!" I’ve seen teams try to do this and the effort put into trying to ensure uniformity of sizings across multiple teams is enormous.
I’m happy to report that there’s an easier way that still allows for overall project progress to be easily seen as well as individual team progress. In essence, instead of normalizing based on story points we suggest “normalizing” based on the calendar. Let me explain: let’s assume, for example, there are two teams on a project, each having its own backlog that has been sized with story points. Team A has 2000 story points on its backlog and Team B has 500. In this case you would have three burndown charts to track progress: one that’s combined (showing 2500 total points), a second one for just Team A (showing 2000 total points), and a third one for just Team B (showing just 500 points). In order to determine relative progress for Team A and Team B, you base it on the number of points completed vs. the number of iterations... Thus, if you're half-way through the project (e.g., 5 of 10 planned iterations are complete), you would expect Team A to be ~1000 points complete (50% of its total) and Team B to be ~250 points complete (50% of its total).
Where things get to be a little more complicated is when you have numerous teams working on a project (for some enterprise application projects we’ve worked with, we’ve seen over 40 teams working on the same project). With two teams, it’s fairly easy to bounce back and forth between Team A’s release burndown chart and Team B’s release burndown chart. When you have more than that, you can create a very simple chart (using any spreadsheet tool) that shows “percent calendar complete” and “percent story points complete” for each team. Following are two examples that we’ve used (they show the same data, just in different formats):
You’ll notice in the first chart that the schedule is 60% complete (the black bars) and then each team’s relative progress is shown. In the second chart, a stacked bar is used to show overall te am progress. In this made-up example, Team 1 is slightly ahead, Team 5 is slightly behind, and the other teams are perhaps struggling...
I’m sure you can think of other, different ways of showing the data, so do whatever’s most helpful. The key is that this approach is so much easier and simpler than trying to normalize the sizing of story points across multiple teams.