IBM Brocade Switch for BladeCenter decoder
anthonyv 2000004B9K Visits (9600)
IBM have offered Brocade switch modules for their BladeCenters for many years. One common question I get asked regards which of these Switch Modules are supported with the IBM Storwize V7000 or IBM XIV.
Your first port of call is the System Storage Interoperation center or SSIC. However that will only list the switch modules by the IBM Feature Part Number (for example 26K5601), which may confuse you. So to help you determine which switch module you possess, here is a history of Brocade SAN switch modules for IBM BladeCenter:
2 Gbps Brocade Switch Modules for IBM BladeCenter
There were two switches but they are actually the same switch with different software features. The Enterprise version had extra licenses like Trunking and Extended Fabrics. These products were withdrawn from marketing on May 26, 2006.
4 Gbps Brocade Switch Modules for IBM BladeCenter
IBM offered two models which were physically identical. You could upgrade from the 10 port to the 20 port with a software activation key. These products were withdrawn from marketing on December 31, 2010.
There are actually three models available but I have collapsed them down to two. The 20 port switch is offered as both Enterprise and non-Enterprise. The 42C1828 switch module is the Enterprise version that has more licensed software features such as Trunking, Fabric Watch and Extended Fabrics (and is indicated with an *).
At the moment the SSIC does not list every switch module. However support is available for many configurations via the IBM SCOR
If your wondering what an IBM FRU number is: a FRU or Field Replacement Unit is the part number used in the IBM spare parts system to replace your part under warranty or maintenance agreement.
If you want the information above in a spreadsheet format, you can find it here.