Modified by ScottAmbler
One of the scaling factors called out in the Software Development Context Framework is “geographic distribution". As with the other scaling factors the level of geographic distribution is a range, with co-located teams at one extreme and far-located at the other. When your team is co-located the developers and the primary stakeholders are all situated in the same work room. If you have some team members in cubicles or in separate offices then you're slightly distributed, if you're working on different floors in the same building you're a bit more distributed, if you're working in different buildings within the same geographic area (perhaps your team is spread across different office buildings in the same city or some people work from home some days) then your team is more distributed, if people are working in different cities in the same country you're more distributed, and finally if people are working in different cities around the globe you're even more distributed (I call this far located).
As your team becomes more distributed your project risk increases for several reasons:
Communication challenges. The most effective means of communication between two people is face-to-face around a shared sketching space such as a whiteboard, and that requires you to be in the same room together. As you become more distributed you begin to rely on less effective communication strategies.
Temporal challenges. When people are in different time zones it becomes harder to find common working times, increasing the communication challenges. One potential benefit, however, is the opportunity to do "follow-the-sun" development where a team does some work during their workday, hands off the work to another team in a significantly different time zone, who picks up the work and continues with it. This strategy of course requires a high degree of sophistication and discipline on the part of everyone involved, but offers the potential to reduce overall calendar time.
Cultural challenges. As the team becomes more distributed the cultural challenges between sites typically increases. Different cultures have different work ethics, treat intellectual property differently, have different ideas about commitment, have different holidays, different approaches to things, and so on.
As you would imagine, because the project risk increases the more distributed your team is, the lower the average success rates of agile projects decrease as they become more distributed. The 2008 IT Project Success Survey found that co-located agile teams has an average success rate of 79%, that near located teams (members were in same geographic area) had a success rate of 73%, and that far-located agile teams had a success rate of 55%. The success rate decreases similarly for project teams following other paradigms.
The practices that you adopt, and the way that you tailor the agile practices which you follow, will vary based on the level of geographic distribution of your team. For example, a co-located team will likely do initial architecture envisioning on a whiteboard and keep it at a fairly high-level. A far-located team will hopefully choose to fly in key team members at the beginning of the project, at least the architecture owners on the various sub-teams, to do the architecture envisioning together. They will likely go into greater detail because they will want to identify, to the best of their ability, the interfaces of the various subsystems or components which they'll be building.
Interestingly, the Agility at Scale 2009 survey found that it was quite common for agile teams to be geographically distributed in some manner:
45% of respondents indicated that some of their agile teams were co-located
60% of respondents indicated that some of their agile teams had team members spread out through the same building
30% of respondents indicated that some of their agile teams were working from home
21% of respondents indicated that some of their agile teams had people working in different offices in the same city
47% of respondents indicated that some of their agile teams had team members that were far located
The bottom line is that some organizations, including IBM, have been very successful applying agile techniques on geographically distributed teams. In fact, agile GDD is far more common than mainstream agile discussion seem to let on.
A common misunderstanding about agile software development approaches are that they're only applicable to small, co-located teams. Yes, it's much easier to be successful with small teams, and with co-located teams, and as a result agilists being smart people prefer to work this way. After all, why take on extra risk when you don't need to do so? But, sometimes reality gets in the way and you find yourself in a situation where you need a large team, or you need to distribute your team (see previous blog postings for strategies for distributed agile development), and you would still like to be as agile as possible. The good news is that it's still possible to be agile with a large team, although you will need to go beyond some of the popular "agile in the small" strategies to succeed.
Here are some disciplined agile strategies to succeed at large-team agile:
- Question the need for a large team. Many times an organization will believe that they need a large team because their process is overly complex, because they're still organized for waterfall development, or simply because that's what they're used to. I've seen teams of 80 people doing the work of 20 as the result of over-specialization of job roles and all the bureaucracy required to organize and validate their work.
- Do some initial envisioning. In order to succeed the team must work together towards the same goals. This is true for small teams but doubly true for larger ones -- without a common vision chaos will quickly ensue. You must gain this common vision on two fronts: you need a common business vision and a common technical vision. To gain the common business vision you must do some initial, high-level requirements envisioning and to gain the common technical vision some common architecture envisioning. This isn't to say that you need to take on the risk of detailed, up-front specifications but you must at least have a high-level understanding of the scope and technical solution in order to move forward effectively. So, expect to spend the first few weeks of your project doing this initial modeling.
- Divide and conquer. You never have a team of 200 people, instead you have a collection of subteams that add up to 200 people. This is called having a team of teams.
- Align team structure with architecture. The most effective way to organize the subteams is to have each one implement one or more components, and thereby to build your overall system as a "system of systems". This reduces the coordination required because the majority of the communication will be within the subteams themselves. You'll still need to coordinate the subteams, that will never go away, but you can reduce the overhead (and the risk) by being smart about the way that you organize the people. A common mistake is to organize around job function (e.g. having architects in Toronto, developers in Raleigh, testers in Bangalore, and so on). This increases communication overhead and risk because these people need to work together closely to get something built.
- Project management coordination. Each subteam will have a team lead/coach, and these people will need to coordinate their work. There is often an overall project manager who leads this group. To coordinate the work within their subteam the team lead/coach will often have a daily meeting, in the Scrum method this is called a scrum meeting, where people share their current status and identify any problems they may be running into. To scale this effectively the team lead/coach attends a daily team coordination meeting, a scrum of scrums, where the same sort of information is shared at the overall team level.
- Product owner coordination. Similarly, each subteam has a product ownder, also referred to as an "on-site customer", who is responsible for making decisions about the requirements and for providing information to the team in a timely manner. Sometimes a single product owner will work with several subteams. The product owners will get together at the beginning of the project to do some requirements envisioning to identify the initial scope and to start portioning the requirements between the subteams. Because the requirements between the subsystems are interrelated and should be reasonably consistent, the product owners will need to meet on a regular basis to share information, to negotiate priorities, and to resolve requirements-related disputes.
- Architecture coordination. Each subteam will have an architecture owner, often a senior technical person and sometimes also in the role of the team lead/coach. These architecture owners will get together at the beginning of the project to do some initial architecture envisioning, based on the requirements envisioning efforts of the product owners. They will identify the major subsystems, and their interfaces, enabling the effective organization of the team into smaller subteams corresponding to the architecture. They will also get together regularly to evolve the architecture and to resolve any major technical issues.
- System integration team. For complex systems, which is often what large teams work on, an effective system integration effort is critical to your success. Although this may be easy at first, as the overall system evolves the need for a subteam focused solely on this quickly becomes apparent. This not only supports the development efforts of the subteams, it also supports independent investigative testing.
- Independent testing team. An independent testing team is common on mid-to-large size agile projects to enhance the testing efforts of the development subteams. This testing team will work in parallel to the developers, they get a new build on a regular basis (minimally each iteration, although more often is desirable), which they test in more advanced ways than what is typical with Test-Driven Development (TDD). For example, they often validate non-functional, quality of service (QoS) type requirements as well as technical constraints, things that often aren't captured well via user stories. They'll also do investigative testing to try to break the system by using it in ways not thought of by the product owners.
- Some specialties reappear. On larger teams it can make sense to have some people be a bit more specialized than what we normally see on small agile teams. For example, it's common to see people in the role of agile DBA, tech writer, build master, or user experience (UE) professional. More complex systems often require people in these roles, although it still behooves these poeple to not be pure specialists but instead to be generalizing specialists with a wider range of skills. Also, recognize that the reintroduction of specialists can be a slippery slope back to the bureaucracy of traditional software development.
In November 2011 Paul Gorans, the Accelerated Solution Delivery (ASD) practice lead in IBM GBS, and I ran an agile adoption survey
. The survey explored a range of issue, including the factors that appear to be associated with the success and failure of agile project teams. Paul wrote up his thoughts in his Agile State of the Art Survey
article on ibm.com and I did the same for Dr Dobb's Journal in Agile Success Factors
. This blog posting summarizes the results of the survey.
Factors which appear to accelerate agile adoption include:
- People are assigned to a single team
- Development teams have easy access to business expertise
- Development teams are organized for agile delivery (not traditional)
- Your organization has an agile support group/community of excellence
- Your organization is explicitly addressing barriers to agility
- There is executive sponsorship for agile
- Agile teams are measured on value creation
- Your organization's IT governance strategy includes an agile path
Factors which appear to decelerate agile adoption include:
- Agile teams are measured using traditional metrics
I have a young daughter and she's at the age where she wants to dress herself. The problem is that if we pick a single outfit and try to get her to wear it she refuses (I've lost count of the times I've heard "I don't want that"). At the other extreme if we let her pick her own outfit from the closet she'll be there for hours trying everything on. As experienced parents advise what we need to do is present her with two or three choices and ask her to pick what she wants.
So how does this relate to software development? Once again, let's look at extremes. First, consider Scrum's approach of prescribing a single way of doing things. For example, Scrum prescribes that you hold a daily meeting, called a Scrum, where everyone stands up and answers the same 3 questions. Scrum also prescribes a single change management strategy where you have a stack of requirements prioritized by business value. Scrum prescribes three roles - ScrumMaster, Product Owner, and Team Member - as well as other things. Don't get me wrong, these strategies are all great in certain circumstances but not for all. Prescribing one way of doing things is an extreme, so perhaps we shouldn't be surprised when people refuse to do it that way or struggle to make it work given the situation that they face.
At the other extreme consider RUP's approach where it presents repository of techniques from which to select the ones appropriate for you. The problem is that now we have an overwhelming way of doing things from which to choose, all of them good options in certain situations. So why are we surprised when teams struggle to identify a coherent tailoring of RUP?
Now let's consider the middle ground. The Disciplined Agile Delivery (DAD) process decision framework takes a goals-driven approach. So, instead of saying "hold a daily stand up meeting and answer these three questions" it says to regularly coordinate within the team and there are several ways of doing so (hold a Scrum meeting, hold a Kanban-style meeting, and so on). Yes, DAD does provide a large number of techniques to choose from (as does the agile community in general) but it also provides a straightforward way to choose between them. DAD does this by describing the advantages and disadvantages of each technique and suggests when, and when not, to use each approach. When people are presented with viable options, and the trade-offs associated with each, it's much more likely that they'll choose an approach that is better suited for their situation.
Scrum's single prescribed strategy works well only when that strategy is appropriate for the situation at hand. Similarly, telling my daughter exactly what to wear works well only when she's in the mood to wear that outfit. RUP's cafeteria approach to software process works well when you have the expertise, and time, to choose what's best for you. Similarly, asking my daughter to pick out her outfit from all the choices in her closet only works well when I've got a lot of time to wait for her. In both situations a better strategy is to present options, describe the trade offs, and then let people pick what's right for them given the context of the situation that they face. This is exactly what the DAD framework promotes.
I believe the goals-based approach of Disciplined Agile Delivery (DAD) represents an important step forward in the software process realm. It's time to recognize the extremes for what they are and move to a more viable middle ground.
Modified by ScottAmbler
For several years now I've written various articles and newsletters on the topics of estimating and funding strategies for software development projects, and in particular for agile software development projects. Whenever I talk to people about agile software development, or coach them in how to succeed at it, some of the very first questions that I'll be asked, particularly by anyone in a management role, is how to fund agile software development projects. Apparently a lot of people think that you can only apply agile strategies on small, straightforward projects where it makes sense to do a time and materials (T&M) approach. In fact you can apply agile strategies in a much greater range of situations, as the various surveys
that myself and others are showing time and again. My goal with this blog posting is to summarize the various strategies for, and issues surrounding, the funding of agile software development projects.
There are three basic strategies for funding projects, although several variations
clearly exist. These strategies are:
- "Fixed price". At the beginning of the project develop, and then commit to, an initial estimate based on your up-front requirements and architecture modeling efforts. Hopefully this estimate is given as a range, studies have shown that up-front estimating techniques such as COCOMO II or function points are accurate within +/- 30% most of the time although my July 2009 State of the IT Union survey found that on average organizations are shooting for +/- 11% (their actuals come in at +/- 19% on average, but only after doing things such as dropping scope, changing the estimate, or changing the schedule). Fixed-price funding strategies are very risky in practice because they promote poor behavior on the part of development teams to overcome the risks foisted upon them as the result of this poor business decision. It is possible to do agile on a fixed budget but I really wouldn't recommend it (nor would I recommend it for traditional projects). If you're forced to take a fixed-price approach, and many teams are because the business hopes to reduce their financial risk via this approach not realizing that it actually increases their risk, then adopt strategies that reduce the risk.
- Stage gate. Estimate and then fund the project for given periods of time. For example, fund the project for a 3-month period then evaluate it's viability, providing funding for another period of time only to the extent that it makes sense. Note that stages don't have to be based on specific time periods, they could instead be based on goals such as to intiate the project, prove the architecture with working code, or to build a portion of the system. Disciplined agile methods such as Open Unified Process have built in stage-gate decision points which enable this sort of strategy. When the estimation technique is pragmatic, the best approaches are to have either the team itself provide an estimate for the next stage or to have an expert provide a good gut feel estimate (or better yet have the expert work with the team to develop the estimate). Complex approaches such as COCOMO II or SLIM are often little more than a process facade covering up the fact that software estimating is more of an art or a science, and prove to be costly and time consuming in practice.
- Time and materials (T&M). With this approach you pay as you go, requiring your management team to actually govern the project effectively. Many organizations believe a T&M strategy to be very risky, which it is when your IT governance strategy isn't very effective. An interesting variation, particularly in a situation where a service provider is doing the development, is an approach where a low rate is paid for their time which covers their basic costs, the cost of materials is paid out directly, and delivery bonuses are paid for working software. This spreads the risk between the customer/stakeholder and the service provider. The service provider has their costs covered but won't make a profit unless they consistently deliver quality software.
The point is that there are several strategies for funding agile software development projects, just like there are several strategies for funding traditional software development projects. My experience is that fixed-price funding strategies are incredibly poor practice which increases the risk of your software development projects dramatically. I recognize how hard it can be to change this desire on the part of our business stakeholders, but have also had success changing their minds. If you choose to perservere, which is a difficult decision to make, you can help your organization's decision makers to adopt more effective strategies. Like you they want to improve the effectiveness of your IT efforts.Further reading: (In recommended order)
- Something's Gotta Give: Argues for a flexibly approach to funding, schedule, and/or scope.
- Agile on a Fixed Budget: Describes in detail how to take a fixed-price approach on agile projects.
- The Dire Consequences of Fixed-Price IT Projects: Describes in detail the questionable behavior exhibited by IT teams when forced to take a fixed-price approach.
- Is Fixed-Price Software Development Unethical?: Questions the entire concept of fixed-price IT projects, overviewing some of the overwhelming evidence against this really poor practice.
- Reducing the Risk of Fixed-Price Projects: Describes viable strategies for addressing some of the problems resulting from the decision of fixed-price projects.
- Strategies for Funding Software Development Projects: Describes several variations on the strategies described above.
- Lies, Great Lies, and Software Development Project Plans: Summarizes some results from the July 2009 State of the IT Union survey which explored issues related to project funding (among many).
Modified by ScottAmbler
An imporant step in scaling your agile strategy is to adopt a Disciplined Agile Delivery (DAD)
approach instead of one which is just focused on agile construction. One aspect of adopting a DAD approach it to mature your focus from just producing software to instead providing a solution which meets the needs of its stakeholders within the appropriate economic, cultural, and technical constraints. The fundamental observation is that as IT professionals we do far more than just develop software. Yes, this is clearly important, but in addressing the needs of our stakeholders we will often:
Provide new or upgraded hardware
Change the business/operational processes which stakeholders follow
Change the organizational structure in which our stakeholders work
Update supporting documentation
And yes, develop high-quality software
Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "soft skills" such as user interface design and process design to name just two.
The shift to a solution-oriented focus from a software-oriented focus requires your agile teams to address some of the software-oriented prejudices which crept into the Agile Manifesto
. The people who wrote the manifesto (which I fully endorse) were for the most part software developers, consultants, and in many cases both. It is little wonder that this group would allow a bias towards software development creep into the language of their manifesto.
A recurring discussion that I have with experienced agile developers is what it means to take a disciplined agile approach. The conversation usually starts off by some saying "but it already requires discipline to do agile", something that I fully agree with, followed by "therefore 'disciplined agile' is merely a marketing term", something which I don't agree with. The challenge with the "standard" agile discipline is that it is often focused on construction activities within a single project team, clearly important but also clearly not the full picture. There's more to an agile project than construction, and there's more to most IT departments than a single development project. In short, there are many opportunities for IT professionals to up their discipline, and thereby up their effectiveness, opportunities which we make explicit in the Disciplined Agile Delivery (DAD) framework.
Let's explore the many aspects to taking a disciplined agile approach:
You adopt "standard" agile discipline
. Aspects of agile which require discipline
include adopting practices such as test-driven development (TDD), active stakeholder participation, working collaboratively, shortening the feedback cycle
, and many more. These strategies are a great start to becoming disciplined IT professionals.
You take a goal-driven approach
. When we first started working on the DAD framework I didn't want to create yet another prescriptive framework, particularly given Rational's track record with the Rational Unified Process (RUP) framework. Rational has been pilloried for years for the prescriptive nature of RUP, which is unfortunate because there are a lot of great ideas in RUP that agile teams can benefit from, some of which we adopted in DAD and many of which are being actively reinvented with the agile community even as you read this. Furthermore, there are many prescriptive elements of the Scrum method that can get teams in trouble. For example, Scrum prescribes that you hold a daily stand up meeting, often called a Scrum meeting, where everyone should answer three questions. That's a great approach for teams new to agile, but it proves problematic in many situations due to it's prescriptive nature. Do you really need to do this once a day? I've been on teams where we held coordination meetings twice a day and others only once a week. Do you really need to stand up? I've been on geographically distrubited agile teams where many of us were sitting down during coordination calls. Do you really need to answer three questions, two of which are clearly focused on status regardless of claims otherwise? I've been on lean teams where we met around our Kanban board and focused on potential blockers. The answers to these questions depends on the context of the situation you find yourself in. The challenge, at least from the point of view of a process framework, is how do you avoid falling into the trap of being overly prescriptive. The strategy we adopted in DAD is to take a goal-driven approach. The observation is that regardless of the situation you find yourself in there are common goals your team will need to fulfill. For example, at the beginning of a project common goals include developing an initial plan, initially exploring the scope, initially identifying a technical strategy, and securing initial funding (amongst others). Throughout construction you should coordinate your activities, improve the quality of your ecosystem, and produce a potentially consumable solution on a regular basis (more on this below). So, instead of prescribing a daily stand up meeting the DAD framework instead indicates you should coordinate your activities, and gives several options for doing so (one of which is a Scrum meeting). More importantly DAD describes the advantages and disadvantages of your options so that you can make the choice that's best suited for the situation your team finds itself in (see this blog posting
for a detailed example of the types of tables included in the DAD book to help you through such process tailoring decisions). In short, our experience is that it requires discipline to take a goal driven approach
to agile delivery over the prescriptive strategies in other agile processes.
You take a context-driven approach
. There are many tailoring factors, which I describe in the Software Development Context Framework (SDCF)
, which you need to consider when making process, tooling, and team structure decisions. For example, a large team will adopt a different collection of practices and tools than a small team. A geographically distributed team will adopt a different strategy than a team that is co-located. You get the idea. Other tailoring factors include compliance, team culture, organization culture, technical complexity, domain complexity, and project type. It requires discipline to recognize the context of the situation you find yourself in and then act accordingly.
You deliver potentially consumable solutions
. One of the observations that we made early in the development of the DAD framework was that disciplined agile teams produce potentially consumable solutions, not just potentially shippable software. Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. For example, not only are we writing software but we may also be updating the hardware on which it runs, writing supporting documentation, evolving the business processes around the usage of the system, and even evolving the organizational structure of the people working with the system. In other words, disciplined agilists focus on solutions over software
. Furthermore, "potentially shippable" isn't sufficient: not only should it be shippable but it should also be usable and should be something people want to use. In other words it should be consumable (a concept DAD adopted from IBM's Outside In Development
). Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "
such as user interface design and process design to name just two.
The incremental delivery of potentially consumable solutions on an incremental basis requires discipline
to do successfully. DAD teams focus on repeatable results not repeatable processes
You are enterprise aware
. Whether you like it or not, as you adopt agile you will constrained by the organizational ecosystem, and you will need to act accordingly. It takes discipline to work with enterprise professionals such as enterprise architects, data admistrators, portfolio managers, or IT governance people who may not be completely agile yet, and have the patience to help them. It takes discipline to work with your operations and support staff in a DevOps
manner throughout the lifecycle, particularly when they may not be motivated to do so. It requires discipline to accept and potentially enhance existing corporate development conventions (programming guidelines, data guidelines, UI guidelines, ...). It requires discipline to accept that your organization has an existing technology roadmap that you should be leveraging, building out, and in some cases improving as you go. In short, enterprise awareness requires a level of discipline
not typically seen on many agile teams.
You adopt a full delivery lifecycle
. Empirically it is very easy to observe that at the beginning of an agile project there are some activities that you need to perform to initiate the project. Similarly at the end of the project there are activities that you need to perform to release the solution into production or the marketplace. The DAD process framework addresses the effort required for the full delivery effort, including project initiation, construction, and deployment. Our experience is that it requires discipline on the part of IT professionals to include explicit phases
for Inception/Initation, Construction, and Transition/Deployment and more importantly to focus the appropriate amount of effort on each. One danger of explicit phases is that you run the risk of taking what's known as a Water-Scrum-Fall
approach, a term coined by Dave West the person who wrote the forward for the DAD book, where you take an overly heavy/traditional approach to inception and transition in combination with a lighter agile approach to construction. Water-Scrum-Fall occurs because many organizations haven't made a full transition to agile, often because they think it's only applicable to construction. Our experience is that you can be very agile in your approach to inception and transition, experience we've built into the DAD framework. Having said that it clearly requires discipline to keep inception activities short
and similarly it requires discipline to reduce the "transition phase" to an activity
You adopt a wider range of roles
. An interesting side effect of adopting a full delivery lifecycle is that you also need to adopt a more robust set of roles. For example, the Scrum method suggests three roles - Scrum Master, Product Owner, and Team Member - a reflection of the Scrum lifecycle's construction focus. DAD suggests three primary roles - Team Lead, Product Owner, Team Member, Architecture Owner
, and Stakeholder - as well as five secondary roles which may appear at scale.
You embrace agile governance
. Governance establishes chains of responsibility, authority and communication in support of the overall enterprise’s goals and strategy. It also establishes measurements, policies, standards and control mechanisms to enable people to carry out their roles and responsibilities effectively. You do this by balancing risk versus return on investment (ROI), setting in place effective processes and practices, defining the direction and goals for the department, and defining the roles that people play with and within the department. It requires discipline to adopt an agile approach to governance
, and that's something built right into the DAD framework.
One of the scaling factors
called out in the Agile Scaling Model (ASM)
is “regulatory compliance”. This name is a bit of a misnomer because this scaling factor really addresses two issues: complying to regulations imposed upon you from external sources and choosing to adhere to internal regulations willingly adopted by your organization. It is relatively common for agile teams to find themselves in such situations. For example, in the 2009 Agile Practices Survey
one third of respondents said that they were applying agile on projects where one or more industry regulations applied.
First let’s consider external regulatory compliance. In these situations you may face the need to undergo an audit by an external regulatory body with consequences for non-compliance ranging from anywhere to a warning to a fine or even to legal action. Sometimes even a warning may be a grave thing. A few years ago I was working with a pharmaceutical company which had discovered that a warning from the FDA for non-compliance with their CFR 21 Part 11 regulation, when reported in major newspapers, resulted on average in a half-billion dollar loss to their market capitalization as the result of a dip in their stock price. There are financial regulations such as Sarbanes-Oxley and Basel II, informational regulations such as HIPAA which focuses on health information privacy, technical regulations such as ISO 27002 for security practices, and even life-critical regulations such as some of the FDA regulations.
External regulations are typically managed by a government organization or industry watchdog will range in complexity and can have a myriad of effects on project teams. For example, you may need to be able to prove that you had a documented process and that you followed it appropriately; you may need to produce extra artifacts, or more detailed artifacts, than you normally would; you may need to add extra features to your solution, such as tracking financial information, that you wouldn’t have normally implemented; you may need to produce specific reports to be submitted to the regulatory body; or you may even need to submit your team to audits, sometimes scheduled and sometimes not, to ensure regulatory compliance. Interestingly, even though many of those requirements go against the agile grain, the 2009 Agility at Scale Survey
found that organizations were successfully applying agile techniques while still conforming to external regulations. So yes, it is possible to scale your agile strategy to address regulatory compliance.
Second, let’s consider compliance to internally adopted, or sometimes even developed, “regulations” which you will be potentially evaluated/appraised against. Perfect examples of these are process improvement frameworks such as CMMI and ISO 900x. Similar to external regulations, the 2009 Agility at Scale Survey
found that some agile teams are succeeding in situations where they have chosen to adopt such frameworks. It’s important to note that frameworks such as CMMI aren’t primarily about ensuring the compliance of development teams to a standard process, regardless of what CMMI detractors may claim, but instead about process improvement. Process improvement at the IT department (or beyond) is an enterprise discipline issue from the point of view of ASM, implying that frameworks such as CMMI affect more than one scaling factor.
When you find yourself in a regulatory situation, whether those regulations are imposed or willingly adopted, the best advice that I can give is to read the regulations and develop a strategy to conform to them in the most agile manner possible. If you let bureaucrats interpret the regulations you’ll likely end up with a bureaucratic strategy, but if you instead choose to take a pragmatic approach you will very likely end up with a very practical strategy. Part of that strategy is to treat the regulatory representative(s) within your organization as important stakeholders whom you interact with regularly throughout the project.
I recently recorded an audio podcast
about Collaborative Development and Operations (DevOps) and how it relates to Disciplined Agile Delivery (DAD)
. The podcast is 17 minutes long and covers a range of topics including:
- What are the challenges typically faced by Disciplined Agile Development teams as they begin to transition their working solutions into production?
- How best could this gap between Development and Operations be closed so that they worked collaboratively rather than in silos?
- If this DevOps gap was decreased or even closed, what would the measurable value be to Agile projects and their business stakeholders?
On a related note, IBM's Collaborative Development and Operations
landing page has some great resources if you're interested in how to implement.
Modified by ScottAmbler
In 2009 I wrote a white paper entitled The Agile Scaling Model (ASM): Adapting Agile Methods for Complex Environments for IBM Rational. Apparently it's been taken down, which I think is unfortunate as it contains some interesting ideas that your organization may be able to benefit from.
The original white paper addresses several key issues:
It provides and explains a definition for disciplined agile delivery. A more up to date discussion of DAD can be found on the Disciplined Agile Delivery site.
It describes criteria to determine is a team is agile. I've explored this issue via several surveys over the years since then. See the January 2013 How Agile Are You? results.
It describes the ASM, which distinguishes between core agile development techniques, disciplined agile delivery strategies, and agility at scale. The ASM was superceded in early 2013 by the Software Development Context Framework (SDCF). Perhaps this is why the ASM paper was taken down??
It overviews the eight scaling factors which a delivery team may face, scaling factors which motivate changes in the process that you will follow and the tools that you will adopt. The SDCF provides my recent thoughts regarding scaling factors. I have also run various IT Surveys over the years exploring how well organizations fare at scaling agile.
It describes the implications of the ASM. My blog posting Scaling Agile: Start with a Disciplined Foundation covers this very well.
It argues that you should strive to be as agile as you need to be, and that will be driven by the situation that you face.
The Agile Scaling Model (ASM) is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size.
The ASM distinguishes between three scaling
- Core agile development. Core agile methods, such as Scrum and Agile Modeling, are self governing, have a value-driven system development lifecycle (SDLC), and address a portion of the development lifecycle. These methods, and their practices, such as daily stand up meetings and requirements envisioning, are optimized for small, co-located teams developing fairly straightforward systems.
- Disciplined agile delivery. Disciplined agile delivery processes, which include Dynamic System Development Method (DSDM) and Open Unified Process (OpenUP), go further by covering the full software development lifecycle from project inception to transitioning the system into your production environment (or into the marketplace as the case may be). Disciplined agile delivery processes are self organizing within an appropriate governance framework and take both a risk and value driven approach to the lifecycle. Like the core agile development category, this category is also focused on small, co-located teams delivering fairly straightforward systems. To address the full delivery lifecycle you need to combine practices from several core methods, or adopt a method which has already done so.
- Agility at Scale. This category focuses on disciplined agile delivery where one or more scaling factors are applicable. The eight scaling factors are team size, geographical distribution, regulatory compliance, organizational complexity, technical complexity, organizational distribution, domain complexity, and enterprise discipline. All of these scaling factors are ranges, and not all of them will likely be applicable to any given project, so you need to be flexible when scaling agile approaches to meet the needs of your unique situation. To address these scaling factors you will need to tailor your disciplined agile delivery practices and in some situations adopt a handful of new practices to address the additional risks that you face at scale.
The first step in scaling agile approaches is to move from partial methods to a full-fledged, disciplined agile delivery process. Mainstream agile development processes and practices, of which there are many, have certainly garnered a lot of attention in recent years. They’ve motivated the IT community to pause and consider new ways of working, and many organizations have adopted and been successful with them. However, these mainstream strategies (such as Extreme Programming (XP) or Scrum, which the ASM refers to as core agile development strategies) are never sufficient on their own; as a result organizations must combine and tailor them to address the full delivery life cycle. When doing so the smarter organizations also bring a bit more discipline to the table, even more so than what is required by core agile processes themselves, to address governance and risk.
The second step to scaling agile is to recognize your degree of complexity. A lot of the mainstream agile advice is oriented towards small, co-located teams developing relatively straightforward systems. But once your team grows, or becomes distributed, or you find yourself working on a system that isn’t so straightforward, you find that the mainstream agile advice doesn’t work quite so well – at least not without sometimes significant modification. Each of the scaling factors introduces their own risks, and when addressed effectively can actually reduce project risk, and for your project team to succeed you will want to identify the scaling factors applicable to the situation that you face and act accordingly. Unfortunately, this is a lot easier said (OK, in this case blogged about) than done.
IBM Rational advocates disciplined agile delivery as the minimum that your organization should consider if it wants to succeed with agile techniques. You may not be there yet, still in the learning stages. But our experience is that you will quickly discover how one or more of the scaling factors is applicable, and as a result need to change the way you work.
There is a fair bit of rhetoric surrounding agile methods, some of which we subscribe to and some of which we don’t. We’d like to briefly examine the rhetoric which we’ve found to be the most misleading for people trying to be effective at adopting agile techniques. The following list is in the format X but Y, where X is the rhetoric and Y is the strategy promoted by the Disciplined Agile Delivery (DAD) process framework. This includes:
- Requirements evolve throughout the lifecycle BUT the scope should still be agreed to at the beginning of the project. There has to be an initial vision for a project, a vision which your stakeholders should help define and then agree to, and to come to that vision you will need to perform some initial requirements envisioning. A list of high level features is part of this initial vision. Yes, the details are very likely to evolve over time but the fundamental goals of your project and scope of your effort needs to be defined early in your project. In a very small minority of situations you may not be able to get the right people together, either physically or virtually, to define the initial vision – this should be seen as a significant project risk.
- Simple designs are best BUT the architecture should be thought out early in the lifecycle. Too many developers interpret the advice to focus on simple designs to mean that they should build everything from scratch. Yet more often than not the simplest design is to take advantage of what is already there, and the best way to do that is to work closely with people who understand your existing technical infrastructure. Investing in a little bit of architectural envisioning early in the lifecycle enables your team to identify existing enterprise assets that you can leverage, to identify your architectural options, and to select what appears to be the best option available to you. The details will still emerge over time, and some decisions will be deferred until a later date when it’s more appropriate to make them, but the bottom line is that disciplined agilists think before they act.
- Teams should be self organizing BUT they are still constrained (and enhanced) by your organizational ecosystem. Intellectual workers, including IT professionals, are most effective when they have a say in what work they do and how they do it. IT professionals can improve their productivity by following common conventions, leveraging and building out a common “dev-ops” infrastructure, building towards a common vision, and by working to common business and technical visions. In short, disciplined agile professionals are "enterprise aware".
- Delivery teams don’t need prescriptive process definitions BUT they do need some high-level guidance to help organize their work. Individual IT professionals are typically highly-skilled and highly-educated people often with years of experience, and teams of such people clearly have a wide range of knowledge. As a result of this knowledge it is incredibly rare for such people to read detailed procedures for how to do their work. However, they often still require some high-level advice to help them to organize their work effectively. Teams can often benefit from techniques and patterns used by other teams and this knowledge sharing should be encouraged.
- IT professionals know what to do BUT they’re still not process experts. A decade ago the strategy was to provide detailed process advice to teams, but recently the pendulum has swung the other way to provide little or no defined process at all. Over the last few years there’s been a trend within the agile community to advise teams to define their own process so that it’s tailored to their own unique situation. While this clearly strokes people’s egos, it’s relatively poor advice for several reasons. First, although every team is in a unique situation there is significant commonality so having at least a high-level process framework from which to start makes sense. Second, although these teams have a wide range of knowledge it might not be complete, nor consistent, nor is it clear what the trade-offs are of combining all the really good techniques that people know about. There is significant benefit in having a flexible process framework such as DAD which shows how everything fits together.
- IT professionals should validate their own work to the best of their ability BUT they likely aren’t testing experts so therefore need help picking up the appropriate skills. The mantra in the agile community is to test often and test early, and better yet to test first. As a result agile teams have adopted a “whole team” approach where the development team does its own testing. This works when there are people on the team with sufficient testing skills and more importantly can transfer those skills to others. Minimally you will need to embed testers into your delivery teams, but you should also consider explicit training and mentoring of everyone on the team in testing and quality skills. You may find my agile testing and quality strategies article to be an interesting read.
- Disciplined agile teams work in an iterative manner BUT still follow a lifecycle which is serial over time. On any given day people on a DAD project team may be performing analysis, testing, design, programming, deployment, or a myriad of other activities and iterating back and forth between them. But, the DAD lifecycle includes three distinct phases which are performed in order. So, DAD is both iterative in the small but serial in the large.
Modified by ScottAmbler
I was recently involved in an online discussion about how to calculate the benefits realized by software development teams. As with most online discussions it quickly devolved into camps and the conversation didn’t progress much after that. In this case there was what I would characterize as a traditional project camp and a much smaller agile/lean product camp. Although each camp had interesting points, the important thing for me in the conversation was the wide cultural and experience gap between the people involved in the conversation.
The following diagram summarizes the main viewpoints and the differences between them. The traditional project camp promoted a strategy where the potential return on investment (ROI) for a project would be calculated, a decision would be made to finance the project based (partly) on that ROI, the project would run, the solution delivered into production, and then at some point in the future the actual ROI would be calculated. Everyone was a bit vague on how the actual ROI would be calculated, but they agreed that it could be done although would be driven by the context of the situation. Of course several people pointed out that it rarely works that way. Even if the potential ROI was initially calculated it would likely be based on wishful thinking and it would be incredibly unlikely that the actual ROI would be calculated once the solution was in production. This is because few organizations are actually interested in investing the time to do so and some would even be afraid to do so. Hence the planned and actual versions of the traditional strategy in the diagram.
The agile/lean camp had a very different vision. Instead of investing in upfront ROI calculation, which would have required a fair bit of upfront requirements modelling and architectural modelling to get the information, the idea was that we should instead focus on a single feature or small change. If this change made sense to the stakeholders then it would be implemented, typically on the order of days or weeks instead of months, and put quickly into production. If your application is properly instrumented, which is becoming more and more common given the growing adoption of DevOps strategies, you can easily determine whether the addition of the new feature/change adds real value.
Cultural differences get in your way
The traditional project camp certainly believed in their process. In theory it sounded good, and I’m sure you could make it work, but in practice it was very fragile. The long feedback cycle, potentially months if not years, pretty much doomed the traditional approach to measuring benefits of software development to failure. The initial ROI guesstimate was often a work of fiction and rarely would it be compared to actuals. The cultural belief in bureaucracy motivated the traditional project camp to ignore the obvious challenges with their chosen approach.
The agile/lean camp also believed in their strategy. In theory it works very well, and more and more organizations are clearly pulling this off in practice, but it does require great discipline and investment in your environment. In particular, you need investment in modern development practices such as continuous integration (CI), continuous deployment (CD), and instrumented solutions (all important aspects of a disciplined agile DevOps strategy). These are very good things to do anyway, it just so happens that they have an interesting side effect of making it easy (and inexpensive) to measure the actual benefits of changes to your software-based solutions. The cultural belief in short feedback cycles, in taking a series of smaller steps instead of one large one, and in their ability to automate some potentially complex processes motivated the agile/lean camp to see the traditional camp as hopeless and part of the problem.
Several people in the traditional project camp struggled to understand the agile/lean approach, which is certainly understandable given how different that vision is compared with traditional software development environments. Sadly a few of the traditionalists chose to malign the agile/lean strategy instead of respectfully considering it. They missed an excellent opportunity to learn and potentially improve their game. Similarly the agilists started to tune out, dropping out of the conversation and forgoing the opportunity to help others see their point of view. In short, each camp suffered from cultural challenges that prevented them from coherently discussing how to measure the benefits of software development efforts.
How Should You Measure the Effectiveness of Software Development?
Your measurement strategy should meet the following criteria:
Measurements should be actioned. Both the traditional and agile/lean strategies described above meet this criteria in theory. However, because few organizations appear willing to calculate ROI after deployment as the traditional approach recommends, in practice the traditional strategy rarely meets this criteria. It is important to note that I used the word actioned, not actionable. Key difference.
There must be positive value. The total cost of taking a measure must be less than the total value of the improvement in decision making you gain. I think that the traditional strategy falls down dramatically here, which is likely why most organizations don’t actually follow it in practice. The agile/lean strategy can also fall down WRT this criterion but is much less likely to because the feedback cycle between creating the feature and measuring it is so short (and thus it is easier to identify the change in results to the actual change itself).
The measures must reflect the situation you face. There are many things you can measure that can give you insight into the ROI of your software development efforts. Changes in sales levels, how often given screen or function is invoked, savings incurred from a new way of working, improved timeliness of information (and thereby potentially better decision making), customer retention, customer return rate, and many others. What questions are important to you right now? What measures can help provide insight into those questions? It depends on the situation that you face, there are no hard and fast rules. For a better understanding of complexity factors faced by teams, see The Software Development Context Framework.
The measures should be difficult to game. Once again, traditional falls down here. ROI estimates are notoriously flakey because they require people to make guesses about costs, revenues, time frames, and other issues. The measurements coming out of your instrumented applications are very difficult to game because they’re being generated as the result of doing your day-to-day business.
The strategy must be compatible with your organization. Once again, this is a “it depends” type of situation. Can you imagine trying to convince an agile team to adopt the traditional strategy, or vice versa? Yes, you can choose to improve over time.
Not surprisingly, I put a lot more faith in the agile/lean approach to measuring value. Having said that, I do respect the traditional strategy as there are some situations where it may in fact work. Just not as many as traditional protagonists may believe.
People who are new to agile are often confused about how agile teams address architecture, but luckily we're seeing more discussion around agile architecture
now in the community so this problem is slowly being addressed from what I can tell. But, what I'm not seeing enough discussion about, at least not yet, is how is enterprise architecture addressed in the overall agile ecosystem. So I thought I'd share some thoughts on the subject, based on both my experiences over the years (see the recommended resources at the bottom of this posting) as well as on an enterprise architecture survey
which I ran in January/February 2010.
My belief is that effective enterprise architecture, particularly in an agile environment, is:
- Business driven. Minimally your EA effort should be driven by your business, not by your IT department. Better yet it should be business owned, although this can be a challenge in many organizations because business executives usually aren't well versed in EA and view it as an IT function. Yes, IT is clearly an important part of EA but it's not the entirety of EA nor is it the most critical part. In many organizations the IT department initiates EA programs, typically because the business doesn't know to do so, but they should quickly find a way to educate the business in the need to own your organization's EA efforts.
- Evolutionary. Your enterprise architecture should evolve over time, being developed iteratively and introduced incrementally over time. An evolutionary approach enables you act on the concrete feedback that you receive when you try to actually implement it, thereby enabling you to steer its development successfully.
- Collaborative. The EA survey clearly pointed to "people issues" being critical determinants of success, and of failure, of EA programs. My experience is that the best enterprise architects, just like the best application architects, work closely with the intended audience of their work, both on the business side of things as well as on the IT side. They will "roll up their sleeves" and become active members of development teams, often in the role of Architecture Owner on agile teams or Architect on more traditional teams. Their mission is to ensure that the development teams that they work with leverage the EA, to mentor developers in architecture skills, and to identify what works and what doesn't in practice so that they can evolve the EA accordingly. Enterprise architects, architects in general, who don't participate actively on development teams (holding architecture reviews isn't active participation) run the risk of being thought of as "ivory tower" and thus easy to ignore.
- Focused on producing valuable artifacts. The most valuable artifacts are useful to the intended audience, are light weight, and ideally are executable. Many EA programs run aground when the enterprise architects focus on artifacts that they've always wanted but that development teams really aren't very excited about -- yes, it might be interesting to have a comprehensive comparison of cloud technologies versus mainframe technologies, but a collection of reusable services would be fare more interesting to them. A detailed enterprise data model indicating suggested data attributes would be intellectually interesting to develop, but a list of legacy data sources with a high-level description of their contents would be immediately valuable to many development teams. A detailed model depicting desired web services would be useful, but an actual collection of working services that I can reuse now would be even better.
- An explicit part of development. In Disciplined Agile Delivery (DAD) architectural activities are an explicit part of the overall delivery process. Part of the architectural advice is that delivery teams should work closely with their organization's enterprise architects so that they can leverage the common infrastructure, and sometimes to help build it out, effectively. Disciplined agile teams realize that they can benefit greatly by doing so.
The Agile Scaling Model (ASM)
calls out addressing enterprise disciplines, such as enterprise architecture, as one of eight scaling factors which may apply to a given project. The interesting thing about this scaling factor is that it's the only one where things get potentially easier for development teams when we move from the simple approach, having a project focus, to the more complex approach, where we have an enterprise focus. By having a common infrastructure to build to, common guidelines to follow, and valuable artifacts to reuse project teams can benefit greatly. So, I guess my advice is to seriously consider adding enterprise disciplines to your agile strategy.Recommended Resources:
Modified by ScottAmbler
When I talk to people about scaling agile techniques, or about agile software development in general, I often put describe strategies in terms of various risks. I find that this is an effective way for people to understand the trade-offs that they're making when they choose one strategy over another. The challenge with this approach is that you need to understand these risks that you're taking on, and the risks that you're mitigating, with the techniques that you adopt. Therein lies the rub, because the purveyors of the various process religions ( oops I mean methodologies) rarely seem to coherently the discuss the risks which people take on (and there's always risk) when following their dogma (oops, I mean sage advice).
For example, consider the risks associated with the various strategies for initially specifying requirements or design. At the one extreme we have the traditional strategy of writing initial detailed speculations, more on this term in a minute, and at the other extreme we have the strategy of just banging out code. In between are Agile Modeling (AM) strategies such as requirements envisioning and architecture envisioning (to name a few AM strategies). Traditionalists will often lean towards the former approach, particularly when several agile scaling factors apply, whereas disciplined agile developers will lean towards initial envisioning. There are risks with both approaches.
Let's consider the risks involved with writing detailed speculations (there's that term again):
You're speculating, not specifying. There is clearly some value with doing some up-front requirements or architecture modeling, although the data regarding the value of modeling is fairly slim (there is a lot of dogma about it though), but that value quickly drops off in practice. However, the more you write the greater the chance that you're speculating what people want (when it comes to requirements) or how you're going to build it (when it comes to architecture/design). Traditionalists will often underestimate the risks that they're taking on when they write big requirements up front (BRUF) , or create big models up front (BMUF) in general, but in the case of BRUF the average is that a large percentage of the functionality produced is never used in practice -- this is because the detailed requirements "specifications" contained many speculations as to what people wanted, many of which proved to be poor guesses in practice.
You're effectively committing to decisions earlier than you should. A side effect of writing detailed speculations is that by putting in the work to document, validate, and then update the detailed speculations the decisions contained in the speculations become firmer and firmer. You're more likely to be willing to change the content of a two-page, high-level overview of your system requirements than you are to change the content of a 200-page requirements speculation that has been laboriously reviewed and accepted by your stakeholders. In effect the decision of what should be built gets "carved in stone" early in the process. One of the principles of lean software development is to defer decisions as late as possible, only making them when you need to, thereby maximizing your flexibility. In this case by making requirements decisions early in the process through writing detailed speculations, you reduce your ability to deliver functionality which meets the actual needs of your stakeholders, thereby increasing project risk.
You're increasing communication risk. We've known for decades that of all the means of communication that we have available to us, that sharing documentation with other people is the riskiest and least effective strategy available to us for communicating information (face-to-face communication around a shared sketching environment is the most effective). At scale, particularly when the team is large or the team geographically distributed, you will need to invest a little more time producing specifications then when the team is co-located, to reduce the inherent risks associated with those scaling factors, but that doesn't give you license to write huge tomes. Agile documentation strategies still apply at scale. Also, if you use more sophisticated tooling you'll find it easier to promote collaboration on agile teams at scale.
You're traveling heavy. Extreme Programming (XP) popularized the concept of traveling light. The basic idea is that any artifact that you create must be maintained throughout the rest of the project (why create a document if you have no intention of keeping it up to date). The implication is that the more artifacts you create the slower you work due to the increased maintenance burden.
There are also risks involved with initial envisioning:
You still need to get the details. Just because you're not documenting the details up front doesn't imply that you don't need to understand them at some point. Agile Modeling includes several strategies for exploring details throughout the agile system development life cycle (SDLC), including iteration modeling performed at the beginning of each iteration as part of your overall iteration planning activities, just in time (JIT) model storming throughout the iteration, and test-driven development (TDD) for detailed JIT executable specification.
You need access to stakeholders. One of the fundamental assumptions of agile approaches is that you'll have active stakeholder participation throughout a project. You need to be able to get information from your stakeholders in a timely manner for the previously listed AM techniques to work effectively. My experience is that this is fairly straightforward to achieve if you educate the business as to the importance of doing so and you stand up and fight for it when you need to. Unfortunately many people don't insist on access to stakeholders and put their projects at risk as a result.
You may still need some documented speculations. As noted previously you may in fact need to invest in some specifications, particularly at scale, although it's important to recognize the associated risks in doing so. For example, in regulatory compliance situations you will find that you need to invest more in documented speculations simply to ensure that you fulfill your regulatory obligations (my advice, as always, is to read the regulations and then address them in a practical manner).
The ways that you approach exploring requirements, and formulating architecture/design, are important success criteria regardless of your process religion/methodology. No strategy is risk free, and every strategy makes sense within given criteria. As an IT professional you need to understand the risks involved with the various techniques so that you can make the trade-offs best suited for your situation. One process size does not fit all.
My final advice is to take a look at the Disciplined Agile Delivery (DAD) framework as it provides a robust strategy for addressing the realities of agile software development in enterprise settings.