The Agile Scaling Model (ASM) is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size.
The ASM distinguishes between three scaling
- Core agile development. Core agile methods, such as Scrum and Agile Modeling, are self governing, have a value-driven system development lifecycle (SDLC), and address a portion of the development lifecycle. These methods, and their practices, such as daily stand up meetings and requirements envisioning, are optimized for small, co-located teams developing fairly straightforward systems.
- Disciplined agile delivery. Disciplined agile delivery processes, which include Dynamic System Development Method (DSDM) and Open Unified Process (OpenUP), go further by covering the full software development lifecycle from project inception to transitioning the system into your production environment (or into the marketplace as the case may be). Disciplined agile delivery processes are self organizing within an appropriate governance framework and take both a risk and value driven approach to the lifecycle. Like the core agile development category, this category is also focused on small, co-located teams delivering fairly straightforward systems. To address the full delivery lifecycle you need to combine practices from several core methods, or adopt a method which has already done so.
- Agility at Scale. This category focuses on disciplined agile delivery where one or more scaling factors are applicable. The eight scaling factors are team size, geographical distribution, regulatory compliance, organizational complexity, technical complexity, organizational distribution, domain complexity, and enterprise discipline. All of these scaling factors are ranges, and not all of them will likely be applicable to any given project, so you need to be flexible when scaling agile approaches to meet the needs of your unique situation. To address these scaling factors you will need to tailor your disciplined agile delivery practices and in some situations adopt a handful of new practices to address the additional risks that you face at scale.
The first step in scaling agile approaches is to move from partial methods to a full-fledged, disciplined agile delivery process. Mainstream agile development processes and practices, of which there are many, have certainly garnered a lot of attention in recent years. They’ve motivated the IT community to pause and consider new ways of working, and many organizations have adopted and been successful with them. However, these mainstream strategies (such as Extreme Programming (XP) or Scrum, which the ASM refers to as core agile development strategies) are never sufficient on their own; as a result organizations must combine and tailor them to address the full delivery life cycle. When doing so the smarter organizations also bring a bit more discipline to the table, even more so than what is required by core agile processes themselves, to address governance and risk.
The second step to scaling agile is to recognize your degree of complexity. A lot of the mainstream agile advice is oriented towards small, co-located teams developing relatively straightforward systems. But once your team grows, or becomes distributed, or you find yourself working on a system that isn’t so straightforward, you find that the mainstream agile advice doesn’t work quite so well – at least not without sometimes significant modification. Each of the scaling factors introduces their own risks, and when addressed effectively can actually reduce project risk, and for your project team to succeed you will want to identify the scaling factors applicable to the situation that you face and act accordingly. Unfortunately, this is a lot easier said (OK, in this case blogged about) than done.
IBM Rational advocates disciplined agile delivery as the minimum that your organization should consider if it wants to succeed with agile techniques. You may not be there yet, still in the learning stages. But our experience is that you will quickly discover how one or more of the scaling factors is applicable, and as a result need to change the way you work.
People who are new to agile are often confused about how agile teams address architecture, but luckily we're seeing more discussion around agile architecture
now in the community so this problem is slowly being addressed from what I can tell. But, what I'm not seeing enough discussion about, at least not yet, is how is enterprise architecture addressed in the overall agile ecosystem. So I thought I'd share some thoughts on the subject, based on both my experiences over the years (see the recommended resources at the bottom of this posting) as well as on an enterprise architecture survey
which I ran in January/February 2010.
My belief is that effective enterprise architecture, particularly in an agile environment, is:
- Business driven. Minimally your EA effort should be driven by your business, not by your IT department. Better yet it should be business owned, although this can be a challenge in many organizations because business executives usually aren't well versed in EA and view it as an IT function. Yes, IT is clearly an important part of EA but it's not the entirety of EA nor is it the most critical part. In many organizations the IT department initiates EA programs, typically because the business doesn't know to do so, but they should quickly find a way to educate the business in the need to own your organization's EA efforts.
- Evolutionary. Your enterprise architecture should evolve over time, being developed iteratively and introduced incrementally over time. An evolutionary approach enables you act on the concrete feedback that you receive when you try to actually implement it, thereby enabling you to steer its development successfully.
- Collaborative. The EA survey clearly pointed to "people issues" being critical determinants of success, and of failure, of EA programs. My experience is that the best enterprise architects, just like the best application architects, work closely with the intended audience of their work, both on the business side of things as well as on the IT side. They will "roll up their sleeves" and become active members of development teams, often in the role of Architecture Owner on agile teams or Architect on more traditional teams. Their mission is to ensure that the development teams that they work with leverage the EA, to mentor developers in architecture skills, and to identify what works and what doesn't in practice so that they can evolve the EA accordingly. Enterprise architects, architects in general, who don't participate actively on development teams (holding architecture reviews isn't active participation) run the risk of being thought of as "ivory tower" and thus easy to ignore.
- Focused on producing valuable artifacts. The most valuable artifacts are useful to the intended audience, are light weight, and ideally are executable. Many EA programs run aground when the enterprise architects focus on artifacts that they've always wanted but that development teams really aren't very excited about -- yes, it might be interesting to have a comprehensive comparison of cloud technologies versus mainframe technologies, but a collection of reusable services would be fare more interesting to them. A detailed enterprise data model indicating suggested data attributes would be intellectually interesting to develop, but a list of legacy data sources with a high-level description of their contents would be immediately valuable to many development teams. A detailed model depicting desired web services would be useful, but an actual collection of working services that I can reuse now would be even better.
- An explicit part of development. In Disciplined Agile Delivery (DAD) architectural activities are an explicit part of the overall delivery process. Part of the architectural advice is that delivery teams should work closely with their organization's enterprise architects so that they can leverage the common infrastructure, and sometimes to help build it out, effectively. Disciplined agile teams realize that they can benefit greatly by doing so.
The Agile Scaling Model (ASM)
calls out addressing enterprise disciplines, such as enterprise architecture, as one of eight scaling factors which may apply to a given project. The interesting thing about this scaling factor is that it's the only one where things get potentially easier for development teams when we move from the simple approach, having a project focus, to the more complex approach, where we have an enterprise focus. By having a common infrastructure to build to, common guidelines to follow, and valuable artifacts to reuse project teams can benefit greatly. So, I guess my advice is to seriously consider adding enterprise disciplines to your agile strategy.Recommended Resources:
Modified by ScottAmbler
Recently I have been asked by several customer organizations to help them to understand how to account for the expense of agile software development. In particular, incremental delivery of solutions into production or the marketplace seem to be causing confusion with the financial people within these organizations. The details of accounting rules vary between countries, but the fundamentals are common. In order to get properly account for the costs incurred by software development teams you need to keep track of the amount of work performed and the type of work performed to develop a given solution. Time tracking doesn't have to be complex: at one customer developers spend less than five minutes a week capturing such information.
Why is Time Tracking Potentially Valuable?
There are several financial issues to be aware of:
Capitalization. For public companies capital expenses (CapEx) can potentially boost book value through the increase in assets (in this case a software-based solution) and increase in net income (due to lower operating expenses that year). On the other hand, operational expenses (OpEx) are accounted for in the year that they occur and thereby reduce net income which in turn reduces your organization's taxes for that year.
Matching. One of the goals of good accounting is to accurately reflect the net income of the enterprise and to prevent income manipulation or "smoothing". As such a key tenet is the principle of matching revenues with the appropriate expenses. For software this means that we expense the cost of the software over the lifetime of the asset against the income at that time. An implication of this is that capitalizing software development, when appropriate, before the software goes into production clearly violates the matching principle since there is no benefit of the asset until such time.
Tax Credits. In some countries you can even get tax credits for forms of software development that are research and development (R&D) in nature.
The point is that the way that a software developer's work is accounted for can have a non-trivial impact upon your organization's financial position.
What Do Agilists Think of Time Tracking?
So, I thought I'd run a simple test. Last week on LinkedIn's Agile and Lean Software Development group I ran a poll to see what people thought about time tracking. The poll provided five options (a limitation of LinkedIn Polls) to choose from:
Yes, this is a valuable activity (33% of responses)
Yes, this is a waste of time (39% of responses)
No, but we're thinking about doing so (2% of responses)
No, we've never considered this (18% of responses)
I don't understand what you're asking (5% of responses, one of which was mine so that I could test the poll)
The poll results reveal that we have a long way to go. Of the people inputting their time more of them believed it was a waste of time than understood it to be a valuable activity. When you stop and think about it, the investment of five minutes a week to track your time could potentially save or even earn your organization many hundreds of dollars. Looking at it from a dollar per minute point of view, it could be the highest value activity that a developer performs in a given week.
The discussion that ensued regarding the poll was truly interesting. Although there were several positive postings, and several neutral ones, many more were negative when it came to time tracking. Some comments that stood out for me included:
It's a colossal waste of time unless you're billing a customer by the hour.
We record time spent on new development work (as distinct from other tasks such as bug fixing in legacy code and so on) as this is capitalised as an asset and depreciated.
I think the *most* pointless example was where the managers told us what we should be putting in.
One day we will move past the "just do it" mentality and have some meaningful conversations and the reasons for what we do.
In my experience time tracking is a massive waste... of time. It's a poor substitute for management.
Why do you need to know more than the info available through Sprint Backlog, Sprint burndown and the daily standup?
Some of my teams (I am SM for three teams) are skeptical about this. They do not think that keeping track of task hours this way will be any more useful than the daily standup reports. And they do not believe that Management can resist the temptation to use task hours as a measure.
I think that there are several interesting implications from this discussion:
Agilists need to become more enterprise aware. It's clear to be really effective that agile delivery teams need a better understanding of the bigger picture, including mundane things such as tax implications of what they're doing. In Disciplined Agile Delivery (DAD) this is something that we refer to as being enterprise aware. There's far more to enterprise awareness than understanding pertinent accounting principles, for interest disciplined agile teams work towards a common technology roadmap and common business roadmap, but appreciating why time tracking is a potentially valuable activity would be a good start.
Management needs to communicate better. It's also clear that management needs to communicate more effectively regarding why they're asking people to track their time. To be fair, management themselves might not be aware of the tax implications themselves so may not be making effective use of the time data they're asking for.
Management needs to govern more effectively. Several people were clearly concerned about how management was going to use the time data (by definition they are measures) which could be a symptom of both poor communication as well as poor governance (unfortunately many developers have experiences where measures have been used against them, a failure of governance, and no longer trust their management teams to do the right thing as a result).
Time tracking should be streamlined. It was obvious from the conversation that several people worked in organizations where the time tracking effort had gotten completely out of hand. Spending 5 minutes a week is ok, and to be quite blunt should be more than sufficient, but spending fifteen minutes or more a day doing so is far too much. Over the years I've helped organizations design measurement programs and I've seen a lot of well-intention efforts become incredibly onerous and expensive for the people they were inflicted upon. I suspect it's time for a reality check in some of these organizations people were alluding to. A good heuristic is that for any measurement you should be able to indicate the real cost of collecting it, the use(s) that the information is being put to, and the value resulting from those uses. If you can't quickly and coherently do that then you need to take a hard look at why you continue to collect that metric. The lament "we might need it one day" is a symptom that you're wasting time and money.
Agile rhetoric is getting in the way. Some of the team-focused agile practices, such as burndown charts (or better yet ranged burndown charts) and stand up meetings may be preventing people from becoming enterprise aware because they believe that all of their management needs are being met by them.
You may be missing out on the benefits of time tracking. Many organizations are potentially leaving money on the table by not being aware of the implications of how to expense software development.
Disciplined agilists are enterprise aware. This is important for two reasons: First, you want to optimize your organizational whole instead of sub-optimize on project-related efforts; second, you can completely miss opportunities to add real value for your organization. In the anecdote I provided it was clear that many agile developers believe that an activity such as time tracking is a waste when that clearly doesn't have to be the case. Worse yet, although someone brought up the issues around capitalizing software development expenses early in the conversation a group of very smart and very experienced people still missed this easy opportunity to see how they could add value to their organization.
Granted, time tracking on an agile project team is nowhere near as sexy as topics such as continuous integration (CI), TDD, the definition of done, continous architecture, or many more. But you know what? Although it's a mind-numbingly mundane issue it is still an important one. 'Nuff said (I hope).
Recently I spent some time in the UK with Julian Holmes of Unified Process Mentors
. In one of our conversations we deplored what we were seeing in the agile community around certification, in particular what the Scrum community was doing, and he coined the term “integrity debt” to describe the impact it was having on us as IT professionals. Integrity debt is similar to technical debt
which refers to the concept that poor quality (either in your code, your user interface, or your data) is a debt that must eventually be paid off through rework. Integrity debt refers to the concept that questionable or unprofessional behavior builds up a debt which must eventually be paid off through the rebuilding of trust with the people that we interact with.
The agile community has been actively increasing their integrity debt through the continuing popularity of Scrum Certification, in particular the program around becoming a Certified Scrum Master (CSM). To become a CSM you currently need to attend, and hopefully pay attention during, a two-day Scrum Master Certification workshop taught by a Certified Scrum Trainer (CST). That’s it. Granted, some CSTs will hold one or more quizzes which you need to pass, an optional practice which isn’t done consistently, to ensure that you pay attention in the workshop.
Scrum Masters, as you know, take the leadership position on a Scrum team. The idea that someone can master team leadership skills after two entire days of training is absurd. Don’t get me wrong, I’m a firm supporter of people increasing their skillset and have no doubt that many of the CSTs deliver really valuable training. However, there is no possible way that you can master a topic, unless it
is truly trivial, in only two days of training. From what I can tell the only thing that is being certified here is that your check didn’t bounce.
The CSM scheme increases the integrity debt of the IT industry by undermining the value of certification. When someone claims that they’re certified there’s an assumption that they had to do something meaningful to earn that certification. Attending a two-day course, and perhaps taking a few quizzes where you parrot back what you’ve heard, clearly isn’t very meaningful. The problem with the term Certified Scrum Master is two-fold: not only does the term Certified imply that the holder of the certification did something to earn it, the term Master implies that they have significant knowledge and expertise gained over years of work.
It is very clear that people are falling for the Scrum certification scheme.
A quick search of the web will find job ads requiring that candidates be CSMs, undoubtedly because they don’t realize that there’s no substance behind the certification. Whenever I run into an organization that requires people to be CSMs I walk them through the onerous process of earning the designation and suggest that they
investigate the situation themselves. Invariably, once they recognize the level of deception, the customer drops the requirement that people be CSMs.
Another quick search of the web will find people bragging about being a CSM, presumably being motivated by the employment opportunities within the organizations gullible enough to accept Scrum certification at face value. My experience is that the people claiming to be CSMs are for the most part decent, intelligent people who 99.99% of the time have far more impressive credentials to brag about than taking a two-day course. Yet, for some reason they choose to park their integrity at the door when it comes to Scrum certification. I suspect that this happens in part because they see so many other people doing it, in part because they’re a bit desperate to obtain or retain employment in these tough economic times, and in part because the IT industry doesn’t have a widely accepted code of ethical conduct. These people not only embarrass themselves when they indicate on their business cards or in their email signatures that they’re Certified Scrum Masters they also increase the integrity debt of the agile community as a whole.
Yet another search of the web will find people bragging about being Certified Scrum Trainers (CSTs), the people whom have been blessed by the Scrum Alliance to deliver Scrum master certification courses. Once again, my experience is that these are intelligent, skilled people, albeit ones who have also parked their integrity at the door in the pursuit of a quick buck. Surely these people could make a decent living via more ethical means? I know that many of them have done so in the past, so I would presume that they could do so in the future. The actions of the CSTs increase our integrity debt even further.
The group of people who have most embarrassed themselves, in my opinion, are those whom we consider thought leaders within the agile community. Leaving aside the handful who are directly involved with the Scrum certification industry, the real problem lies with those who have turned a blind eye to all of this. The Scrum certification scheme was allowed to fester within our community because few of our thought leaders had the courage to stand up and publicly state what they were talking about in private. This of course is all the more galling when you consider how much rhetoric there is around the importance of courage on software development projects. As Edmund Burke once observed, all that is necessary for evil to triumph is for good men to do nothing.
There are several things that we can do today to start paying off some of our integrity debt:
- Be discerning, not deceptive. If you’re going to list credentials on your email signature or business card then only choose to list the ones that actually mean something.
- Educate human resources people. Make them aware of what “Certified Scrum Master” really means and let them think for themselves. I highly suspect that if HR people realized what was going on the demand for CSMs would plummet, and in turn people wouldn’t be tempted by Scrum certification.
- Act professional, don’t just claim to be certified. Instead of signing up for every easy certification that comes your way why not simply do a good job and let the people you work with be your claim to fame? The good news is that for the past few years the agile community has tried to pay down some of the IT industry’s integrity debt that we have with our stakeholders by providing better return on investment (ROI), delivering systems which are more effective at addressing the needs of your stakeholders, by working in a more timely manner, and by producing greater quality work. All of these claims are borne out by the 2008 Software Development Project Success Rate Survey by the way.
- Recognize that adding a test doesn’t address the underlying problems. For the past year there’s been a move afoot to have people pass a test as part of earning their CSM (apparently it’s been a challenge to create a non-trivial test to validate your understanding of a topic that you can master by taking a two-day training course). This is something that should have been done from the very beginning, along with some sort of peer review, not years later when the damage has been done. Adding a test at this late date isn’t going to remove the stink that’s built up over the years, but sadly it will fool a few people into believing that they’ve covered it up.
- Recognize that there is a demand for certification. The agile community needs to put together a decent certification program, something that the Scrum Alliance has clearly failed at doing. My article Coming Soon: Agile Certification provides some thoughts as to what we need to do. The good news is that people such as Ron Jeffries and Chet Hendrickson, and others, are putting together a developer certification program. The really good news is that these are the right people to do this. The really bad news is that they’re doing it under the aegis of the Scrum Alliance, so whatever they accomplish will unfortunately be tainted by the fallout of the CSM debacle.
If we're going to scale agile software development strategies to meet the range of challenges faced by modern organizations, we need to be trustworthy. Is claiming to be a certified master after taking a two-day course an act which engenders trust? I don't think so. As individuals we can choose to do better. As a community we need to.Suggested Reading
- Agile Certification -- A humorous look at certification.
- IT Surveys -- A great resource for statistics about what IT people are actually doing in practice.
Modified by ScottAmbler
I'm happy to announce that A Practical Guide to Distributed Scrum by Elizabeth Woodward, Steffan Surdek, and Matthew Ganis is now in print. I've been talking this book up in presentations and with customers the past few months and promised that I would let everyone know once it was available. I was one of several people who wrote forewords for the book, Ken Schwaber, Roman Pichler, and Matthew Wang also did so, and I've modified my foreword below to help you to understand a bit better what the book is about.
If you’re thinking about buying this book, you’re probably trying to answer one or more of the following questions: “What will I learn?”, “Should I spend my hard earned money on this book?”, “Will it be worth my valuable time to read it?”, and “Is this a book that I’ll refer to again and again?” To help you answer these questions, I thought I’d list a few user stories which I believe this book clearly fulfills:
As a reader I want:
a book that is well-written and understandable real-world examples that I can relate to
quotes from actual people doing this in the field
to understand the challenges that I’ll face with distributed agile development
As someone new to agile I want to:
learn the fundamentals of Scrum
understand the fundamentals of agile delivery
learn about what actually works in practice
discover how extend Scrum into an agile delivery process
As an experienced agile practitioner I want to learn:
how to scale agile approaches for distributed teams
how to overcome the challenges faced by distributed teams
how to tailor existing agile practices to reflect the realities of distribution
bout “new” agile practices which we might need to adopt
techniques so that distributed team members can communicate effectively
how to extend Scrum with proven techniques from Extreme Programming, Agile Modeling, and other agile methods
how to address architectural issues on a distributed agile team
how agile teams address documentation
how agile teams can interact effectively with non-agile teams
As a Scrum Master I want to learn how to:
lead a distributed agile team
facilitate a distributed “Scrum of Scrums”
facilitate the successful initiation of a distributed agile project
facilitate communication and collaboration between distributed team members
As a Product Owner I want to learn:
how to manage a product backlog on a distributed team
about different categories of stakeholders whom I will need to represent
about techniques to understand and capture the goals of those stakeholders
how to manage requirements with other product owners on other sub-teams
what to do during an end-of-sprint review
how I can streamline things for the delivery team that I’m working with
As an agile skeptic I want to:
see examples of how agile works in practice
hear about the challenges faced by agile teams
hear about where agile strategies don’t work well and what to do about it
I work with organizations around the world helping them to scale agile strategies to meet their real-world needs. Although this book is focused on providing strategies for dealing with geographical distribution, it also covers many of the issues that you’ll run into with large teams, complex problem domains and complex technical domains. An important aspect of scaling agile techniques is to first recognize that’s there’s more to scalability than dealing with large teams, something which this book clearly demonstrates.
At the risk of sounding a bit corny, I’ve eagerly awaited the publication of this book for some time. I’ve known two of the authors, Elizabeth and Matt, for several years and have had the pleasure of working with them and learning from them as a result. Along with hundreds of other IBMers I watched this book get written and provided input where I could. The reason why I’m so excited about it is that I’ve wanted something that I could refer the customers to that I work with and honestly say, “yes, we know that this works because this is what we do in practice”.
IBM is doing some very interesting work when it comes to scaling agile. We haven’t published enough externally, in my opinion, due to a preference for actively sharing our experiences internally. This book collects many of our experiences into a coherent whole and more importantly shares them outside the IBM process ecosystem. Bottom line is that I think that you’ll get a lot out of this book.
Modified by ScottAmbler
One of the scaling factors called out in the Software Development Context Framework (SDCF) is domain complexity. The general idea is that agile teams will find themselves in different situations where some teams are developing fairly straightforward solutions, such as an informational website, whereas others are addressing very complex domains, such as building an air-traffic control system (ATCS). Clearly the team building an ATCS will work in a more sophisticated manner than the one building an informational website. I don't know whether agile techniques have been applied in the development of an ATCS, although I have to think that agile's greater focus on quality and working collaboratively with stakeholders would be very attractive to ATCS delivery teams, I do know that agile is being applied in other complex environments: The 2009 Agility at Scale Survey found that 18% of respondents indicated that their organizations had success at what they perceived to be very complex problem domains,.
Increased domain complexity may affect your strategy in the following ways:
Reaching initial stakeholder consensus becomes difficult. One of the risk reduction techniques called out in Disciplined Agile Delivery (DAD) is to come to (sufficient) stakeholder consensus at the beginning of the project during the Inception phase (called Sprint 0 in Scrum or Iteration 0 in other agile methods). Stakeholder consensus, or perhaps "near concensus" or "reasonable agreement" are better terms, can be difficult to come to the more complex the problem domain is because the stakeholders may not fully understand the implications of what they're making decisions about and because there is likely a greater range of stakeholders with differing goals and opinions. The implication is that your project initiation efforts may stretch out, increasing the chance that you'll fall back on the old habits of big requirements up front (BRUF) and incur the costs and risks associated with doing so.
Increased prototyping during inception. It is very common for disciplined agile teams to do some light-weight requirements envisioning during inception to identify the scope of what they're doing and to help come to stakeholder consensus. The greater the complexity of the domain, and particularly the less your team understands about the domain, the more likely it is that you'll benefit from doing some user interface (UI) prototyping to explore the requirements. UI prototyping is an important requirements exploration technique regardless of paradigm, and it is something that you should consider doing during both initial requirements envisioning as well as throughout the lifecycle to explore detailed issues on a just in time (JIT) manner.
Holding "all-hands reviews". One strategy for getting feedback from a wide range of people is to hold an "all hands review" where you invite a large group of people who aren't working on a regular basis with your team to review your work to date. This should be done occasionally throughout the project to validate that the input that you're getting from your stakeholder represenatives/product owners truly reflects the needs of the stakeholders which they represent. The 2010 How Agile Are You? Survey found that 42% of "agile teams" reported running such reviews.
Increased requirements exploration. Simple modeling techniques work for simple domains. Complex domains call for more complex strategies for exploring requirements. The implication is that you may want to move to usage scenarios or use cases from the simpler format of user stories to capture critical nuances more effectively. A common misunderstanding about agile is that you have to take a "user story driven approach" to development. This is an effective strategy in many situations, but it isn't a requirement for being agile.
The use of simulation. You may want to take your prototyping efforts one step further and simulate the solution. This can be done via concrete, functional prototypes, via simulation software, via play acting, or other strategies.
Addition of agile business analysts to the team. Analysis is so important to agile teams we do it every day. In situations where the domain is complex, or at least portions of the domain is complex, it can make sense to have someone who specializes in exploring the domain so as to increase the chance that your team gets it right. This is what an agile business analyst can do. There are a few caveats. First, even though the domain is complex you should still keep your agile analysis efforts as light, collaborative, and evolutionary as possible. Second, this isn't a reason to organize your team as a collection of specialists and thereby increase overall risk to your project. The agile analyst may be brought on because their specialized skills are required, but the majority of the people on the team should still strive to be generalizing specialists. This is also true of the agile analyst because their may not be eight hours a day of valuable business analysis work on the team, and you don't want the BA filling in their time with needless busy work.
The important thing is to recognize that the strategies which work well when you're dealing with a simple domain will not work well for a complex domain. Conversely, techniques oriented towards exploring complex domains will often be overkill for simple domains. Process and tooling flexiblity is key to your success.
Again and again I've seen IT organizations suffering from what I call the "Bureaucracy is Discipline" antipattern. For example, filling out forms and reviewing documents are both bureaucratic activities, neither of which require significant skill nor discipline to accomplish. However, agile practices such as developing potentially shippable software every iteration is easy to say but requires great discipline to accomplish. Respecting the decisions of your stakeholders, particularly those pertaining to requirements prioritization, is easy to talk about but proves to require great discipline in practice (particularly when you don't agree with a decision). It's easy to talk about taking a test-driven approach to development
, but in practice it requires significant skill and discipline to actually do.
A "process smell" which indicates that your organization is suffering from this antipattern is a focus on following repeatable processes instead of focusing on repeatable results. An example of repeatable processes is following the same route to work every day regardless of driving conditions. An example of repeatable results is getting to work on time every day, but being willing to change your route as required, bicycling into work instead of driving, taking public transit, and so on. Nobody really cares how you get to work each day (the process), what they really care about is that you got to work on time (the result). Sadly, we've been told for decades now that repeatable processes are critical to our success in IT, yet when you step back and think about that's really a reflection of a bureaucratic approach. On the other hand, a focus on repeatable results is a reflection of a more disciplined approach. Interestingly, the DDJ 2008 Process Framework survey
found that given the choice that people would much rather have repeatable results over repeatable processes
when it comes to IT.
Mistaking bureaucracy for discipline, or rigour if you prefer that term, is a reflection of the cultural damage that has occurred over the years in IT organizations as the result of traditional philosophies and techniques. Unfortunately, this mistaken belief is a significant inhibitor to software process improvement (SPI) efforts, in particular agile adoption efforts
, which must be addressed if you're to be successful. Overcoming this challenge will require a significant cultural shift in some organizations, and many people (particularly the bureaucrats) will find this uncomfortable.Further reading:
I'd like to leave you with this parting thought: Bureaucracy is bureaucracy and discipline is discipline, please don't confuse the two
A few days later someone asked a series of questions that I thought would make an interesting blog posting, so here goes:How much of IBM's projects (in percentage) are agile at the moment?
I don’t have exact numbers, but I believe that 90%+ of our teams in SWG are applying agile techniques in practical ways that make sense for their projects. The primary goal is to be effective – in frequent releases, higher quality, and happy customers – not just agile. By the way, there is roughly 30,000 developers in SWG.Can all of IBM's projects work with an agile methodology?
It’s certainly possible, but it may not always make sense. Products that are in maintenance mode with few bugs or feature requirements may not benefit as much from agile practices -- those teams will likely continue to do whatever it is that they have been doing. Having said that, it's still highly desirable to apply agile techniques on maintenance projects.
Also, agile methods can be harder to use on some projects than others, for example, around hardware development. As a general rule, I believe that the majority of software projects can benefit from agile techniques. The primary determinant of whether a team can adopt agile techniques is culture and skill – not team size, the domain, or the degree of geographic distribution. That notion surprises many people who think that large agile teams
or geographically distributed agile teams
can’t succeed in adopting agile practices.Are agile projects sub-parts of large waterfall projects?
In some cases, that may happen. I’m sure it’s also true in reverse. We see many customers who are migrating from waterfall projects to a more agile way of doing things, and they often start this migration with smaller sub-projects. At IBM, we have tens of thousands of developers worldwide on hundreds of teams, so we have examples of pretty much any combination of agile, iterative, and traditional practices that you can imagine. There’s definitely not one size that fits all, which is a key aspect of the Disciplined Agile Delivery (DAD)
process framework.What do you think the impact of these numbers will be on the PM community?
The IBM PM community is embracing agile. And the reality is that a majority of development organizations around the world are moving to agile now as well (as much as 80% in some of the recent studies I’ve seen). I look forward to the increased adoption of agile methods by the PM community in general. The fact that PMI now offers an Agile Certified Practitioner training program certainly underscores the fact that agile practices are being adopted widely in the mainstream which is a great thing to see.
There is a distinct rhythm, or cadence, at different levels of the agile process. We call this the agile 3C rhythm, for coordinate, collaborate, and conclude (which is sometimes called stabilize). The agile 3C rhythm occurs at three levels in Disciplined Agile Delivery (DAD):
- Day. A typical day begins with a short coordination meeting, called a Scrum meeting in the Scrum method. After the daily coordination meeting the team collaborates throughout most of the day to perform their work. The day concludes with a working build, hopefully you had several working builds throughout the day, which depending on your situation may require a bit of stabilization work to achieve.
- Iteration. DAD construction iterations begin with an iteration planning session (coordinate) where the team identifies a detailed task list of what needs to be done that iteration. Note that iteration modeling is often part of this effort. Throughout the iteration they collaborate to perform the implementation work. They conclude the iteration by producing a potentially consumable solution, a demo of that solution to key stakeholders, and a retrospective to identify potential improvements in the way that they work.
- Release. The DAD lifecycle calls out three explicit phases - Inception, Construction, and Transition – which map directly to coordinate, collaborate, and conclude respectfully.
The agile 3C rhythm is similar conceptually to Deming’s Plan, Do, Check, Act (PDCA) cycle:
- Coordinate maps to plan
- Collaborate maps to do
- Conclude maps to check and act
Contrary to popular belief, agile development teams do in fact model and yes, they even do some up front requirements and architecture modeling. Two of the best practices of Agile Modeling are Requirements Envisioning
and Architecture Envisioning
where you spend a bit of time at the beginning of the project doing enough initial modeling to get you going in the right direction. The strategy is to take advantage of modeling, which is to communicate and think things through without taking on the risks associated with detailed specifications written early in the lifecycle
. In this blog posting I will focus on requirements envisioning, in a future posting I'll cover architecture envisioning.
The goal of initial requirements envisioning is to identify the scope of your effort. You need to do just enough modeling early in the project to come to stakeholder concurrence and answer questions such as what you're going to build, roughly how long it's going to take (give a range), and roughly how much it's likely to cost (once again, give a range). If you can get the right people together in the room, which can sometimes be a logistics challenge but not one that you couldn't choose to overcome, there are very few systems (I suspect less than 5%) that you couldn't initially scope out in a few days or a week. I also suspect that most of the remaining systems could be scoped out with less than 2 weeks of modeling, and if not then I'd take that as an indication that you're taking on too large of a project. I'm not saying that you'll be able to create big detailed specifications during this period, and quite frankly given the problems associated with "Big Requirements Up Front (BRUF)
" you really don't want to, but I am saying that you could gain a pretty good understanding of what you need to do. The details, which you'll eventually need, can be elicited throughout the lifecycle when you actually need the information. A common saying in the agile community is that requirements analysis is so important for us that we do it every single day, not just during an initial phase. I'll discuss just in time (JIT) approaches to requirements modeling in a future posting.
To envision the requirements for a business application, you might want to consider creating the following models:
- High-level use cases (or user stories). The most detail that I would capture right now would be point form notes for some of the more complex use cases, but the majority just might have a name. The details are best captured on a just-in-time (JIT) basis during construction.
- User interface flow diagram. This provides an overview of screens and reports and how they're inter-related. You just need the major screens and reports for now.
- User interface sketches. You'll likely want to sketch out a few of the critical screens and reports to give your stakeholders a good gut feeling that you understand what they need. Sketches, not detailed screen specifications, are what's needed at this point in time.
- Domain model. A high-level domain model, perhaps using UML or a data modeling notation, which shows major business entities and the relationships between them, can also be incredibly valuable. Listing responsibilities, both data attributes and behaviors, can be left until later iterations.
- Process diagrams. A high-level process diagram, plus a few diagrams overviewing some of the critical processes, are likely needed to understand the business flow.
- Use-case diagram. Instead of a high-level process diagram you might want to do a high-level use case diagram instead. This is a matter of preference, I likely wouldn't do both.
- Glossary definitions. You might want to start identify key business terms now, although I wouldn't put much effort into settling on exact definitions. I've seen too many teams run aground on "analysis paralysis" because they try to define exact terminology before moving forward. Don't fall into this trap.
For small teams simple tools such as whiteboards and paper are usually sufficient for requirements envisioning. But what happens at scale? What if you're working on a large agile team, say of 50 people, 200 people (IBM has delivered software into the marketplace with agile teams of this size), or even 500 people (IBM currently has teams of this size applying agile techniques)? What if your team is distributed? Even if you have people working on different floors of the same building, let alone working from home or working in different cities or countries, then you're distributed (see my postings about distributed agile development
). Suddenly whiteboards and paper-based tools (index cards, sticky notes, ...) aren't sufficient. You're still likely to use these sorts of tools in modeling sessions with stakeholders, but because of one or more scaling factors you need to capture your requirements models electronically.
In January Theresa Kratschmer and I gave a webcast entitled Agile Requirements: Collaborative, Contextual, and Correct
which overviewed agile approaches to requirements elicitation and management, including requirements envisioning. We also showed how Rational Requirements Composer (RRC)
can be used to electronically capture critical requirements information, enabling you to address the needs of large and/or distributed agile teams, while still remaining lightweight and flexible. I suspect that you'll find the webcast to be very illuminating and RRC something that you want to take a look at (the link leads to a trial version). Of course RRC can be used in other situations as well, but that's not what I'm focused on right now.
Teams which find themselves in regulatory environments will likely need to do more than just use RRC, as might very large teams. Regulatory compliance often requires more complex requirements documentation, which in turn requires more sophisticated tools such as DOORS or Requisite Pro, and I would consider using those tools in the types of situations that warrant it. One of the things that people often struggle to understand about agile approaches is that you need to tailor your strategy to reflect the situation at handle. One process size does not fit all, so you will end up using different tools and creating different artifacts to different extents in different situations. Repeatable results, not repeatable processes
, is the rule of the day. Further reading:
Modified by ScottAmbler
IBM Rational recently published an update to my Agility@Scale e-book, which can be downloaded free of charge. The e-book is a 21 page, 2.3 meg PDF (sorry about the size, guess the graphics did it) . It overviews the Agile Scaling Model (ASM) (which has since been replaced by the Software Development Context Framework (SDCF) ), Disciplined Agile Delivery (DAD), the scaling factors of agility at scale, and ends with some advice for becoming as agile as you can be. In short it's a light-weight coverage of some of the things I've been writing about in this blog the past couple of years. Could be a good thing to share with the decision makers in your organization if they're considering adoption agile strategies.
I was recently in Bangalore speaking at the Rational Software Conference, which was really well done this year, and visiting customers. In addition to discussing how to scale agile software development approaches, particularly when the team is distributed geographically and organizationally, I was also asked about what I thought about a software factory approach to development. My instinctual reaction was negative, software factories can result in lower overall productivity as the result of over specialization of staff (I prefer generalizing specialists
), too many hand-offs between these specialists (I find close collaboration to be far more effective), and too much bureaucratic overhead to coordinate these activities. I initially chalked it up to these people still believing that software development was mostly a science, or perhaps an engineering domain, whereas my experiences had made me come to believe that software development is really more art than it is a science. Yet, the consistent belief in this strategy by very smart and experienced people started me thinking about my position.
Just let me begin by saying that this blog posting isn't meant to be yet another round in the age old, and relatively inane, "art vs. science" debate within the software development community. That debate is a symptom of versusitis
, a dread disease which particularly plagues the IT industry and which can any of us at any time. There is no known cure, although the combination of experience, open-mindedness, and critical thought are the best inoculation against versusitis that we have so far. In that vein, let me explore the issues as I see them and I will let you think for yourself.
On the one hand software development has aspects of being an art for several reasons. First, the problem definition is never precise, nor accurate, and even when we have detailed specifications the requirements invariably evolve
anyway. The lack of defined, firm requirements requires us to be flexible and to adjust to the situation that we find ourselves in. Second, teams typically find themselves in unique situations, necessitating a unique process and tool environment to reflect this (assuming that you want to be effective, otherwise there's nothing stopping you from having a "repeatable process" and consistent tool environment). Third, software is built by people for people, requiring that the development team have the ability to build a system with a user interface which meets the unique needs of their end users. One has only to look at the myriad UI designs out there to see that surely there is a bit of art going on. Fourth, if software development wasn't at least partially art then why hasn't anyone succeeded at building tools which take requirements as inputs and produce a viable solution that we can easily deploy? It's been over four decades now, so there's been sufficient time and resources available to build such tooling. Fifth, regardless of how much of a scientific/business facade we put over it, our success rate at producing up front detailed cost estimates and schedules speak for itself (see Funding Agile Projects
for links to articles).
On the other hand software development has aspects of being a science for several reasons. First, some aspects of software development have in fact been automated to a significant extent. Second, there is some mathematical basis to certain aspects of software development (although in the case of data-oriented activities the importance of relational theory
often gets blown way out of proportion and I have yet to see a situation where formal methods proved to be of practical value).
What does this have to do with Agility@Scale. As you know, one of the agile scaling factors
is Organizational Complexity, and cultural issues are the hardest to overcome. Whether your organization believes that software development is mostly an art or mostly a science is a cultural issue which will be a major driver in you choice of methods and practices. Organizations which believe that software development is more of a science will prefer strategies such as software factories, model-driven architecture (MDA),
and master data management (MDM)
. And there is ample evidence to support the claims that some organizations are succeeding at these strategies. Although you may not agree with these strategies, you need to respect the fact that many organizations are making them work in their environments. Similarly, organizations which believe that software development is more of an art will find that agile and lean strategies are a better fit, and once again there is ample evidence that organizations are succeeding with these approaches (there's also evidence that agile projects are more successful
than traditional projects, on average). Once again, you may not agree with these strategies but you need to respect the fact that other people are making them work in practice.
Trying to apply agile approaches within an organization that believes software development is mostly a science will find it difficult at best, and will likely need to embark on a multi-year program to shift their culture (likely an expensive endeavor which won't be worth the investment). Similarly, trying to apply a software factory strategy in an organization that believes that software development is mostly an art will also run aground. The bottom line is that one size does not fit all, that one strategy is
not right for all situations and that you need to understand the trade-offs of various strategies, methodologies, techniques, and practices and apply them appropriately given the situation that you face. In other words, it depends! If you are embarking on a software process initiative, and you don't have the broad experience required to effective choose between strategies (very few organizations do, although many believe otherwise), then you should consider Measured Capability Improvement Framework (MCIF)
to help increase your chance of success.
I'm happy to announce that a revised version of the Lean Development Governance
white paper which I co-wrote with Per Kroll is now available. This version of the paper reflects our learnings over the past few years helping organizations to improve their governance strategies.
There's a more detailed description of the paper here
I'm happy to announce that IBM Rational's RP252 Advanced Disciplined Agile Delivery (DAD) workshop
is now available. This is a 3-day, hands-on workshop which teaches students the fundamentals of Disciplined Agile Delivery (DAD)
. This workshop is offered both publicly and privately.
Modified by ScottAmbler
A common misunderstanding about agile software development is that it’s only for co-located teams. Things are definitely easier for co-located teams, and as I found with both the Dr. Dobb’s 2007 and 2008 Agile Adoption surveys (www.ambysoft.com/surveys/) co-located agile teams appear to have a higher success rate than distributed teams, Having said that, many organizations are in fact succeeding at distributed agile development.
I’d like to share some strategies that I’m seeing work in practice, and in this blog posting summarizes generic strategies for distributed teams whether or not they’re agile. These strategies are:1. Do some up front planning. Distributed development is higher risk than co-located development, and one way to address that risk is to think things through. That doesn’t mean that you need to create a monolithic, 1000+ task Gantt chart, but it does mean that you should identify your major dependencies and milestone dates. Effective teams do this planning with the distributed developers actively involved (they are part of the team after all), they strive to consider all associated costs, and in particular they don’t overlook the low probability/high impact risks which often prove to be project killers.
2. Organize the team effectively. Once of the practices of Lean Development Governance (https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=swg-ldg) is to organize your team structure around either your architecture or the lines of business (LOB) supported by the programme that you’re working on. Ideally each sub-team should be responsible for one or more subsystems or modules, something that can be difficult if some of your team works alone from home, to reduce the amount of information sharing and collaboration required between disparate teams. In other words, maximize the responsibilities of the “offshore” team(s) as much as possible. A very common mistake is to organize the subteams around job specialties – for example the architects are in Toronto, the developers in Mumbai, and the testers in Singapore – because to support this team structure you have to create a phenomenal amount of documentation to support communication between the teams.
3. Do some up front modeling. The implication of organizing your team around the architecture (or LOB) is that you also need to do a bit of architecture envisioning up front. Your architecture efforts should provide guidance regarding the shared infrastructure as well as critical development conventions such as coding guidelines and data naming conventions. Architecture envisioning is also a good idea for co-located agile teams too. See http://www.agilemodeling.com/essays/initialArchitectureModeling.htm for strategies to get the benefits of architecture modeling without the costs of needless documentation.
4. Recognize that communication is critical. GDD puts many barriers to communication in place, increasing overall project risk. To overcome these risks you will first need to be aware of them and act accordingly, and second, you’ll need to write more documentation than you would likely prefer. The risks associated with long-distance communication include cultural differences, time-zone differences, and the challenges with written documentation (which is the least effective way to communicate information). I make it a habit of asking open-ended questions so that I can determine whether or not the other people understand the topic under conversation. Particularly I will never ask a yes/no style of question because the simple answer of yes can mean a range of things depending on the culture. It may mean “Yes, I heard you”, “Yes, I understand what you’re saying”, or “Yes, I understand and agree with you”. When you’re dealing with people at other locations it’s good practice to ask them to summarize the conversation in writing, in particular to identify key action items and ownership of them, to ensure that everyone agrees with what was discussed. A good approach is to have the team lead on other end to do the summary so that they own it going forward.
5. Put a good technical infrastructure in place. Automate, automate, automate. In a GDD environment you need to work with collaborative multi-site tools such as ClearCase, ClearQuest, and Jazz Rational Team Concert (www.jazz.net) which enable you to share and evolve your work products (i.e. test scripts, code, documents) effectively.
In my next posting I'll describe a collection of agile-specific strategies for distributed software development teams.[Read More
During 2007 Per Kroll and myself invested a significant amount of time development a framework for lean development governance. This effort resulted in a series of three articles that were published in Rational Edge and a recently published white paper. The articles go into the various practices in detail whereas the paper provides an overview aimed at executives. I also recently did a webcast which is now available online. The URLs are at the bottom of this blog posting.
Development governance isn’t a sexy topic, but it critical to the success of any IT department. I like to compare traditional, command-and-control approaches to governance to herding cats – you do a bunch of busy work which seems like a great idea in theory, but in the end the cats will ignore your efforts and stay in the room. Yet getting cats out of a room is easy to accomplish, as long as you know what motivates cats. Simply wave some fish in front of their noses and you’ll find that you can lead them out of the room with no effort at all. Effective governance for lean development isn’t about command and control. Instead, the focus is on enabling the right behaviors and practices through collaborative and supportive techniques. It is far more effective to motivate people to do the right thing than it is to try to force them to do so.
This framework is based on the philosophical foundation provided by the 7 principles proposed in the book “Lean Software Development” by Mary and Tom Poppendieck. The 7 principles are:1. Eliminate Waste. The three biggest sources of waste in software development are the addition of extra features, churn, and crossing organizational boundaries. Crossing organizational boundaries can increase costs by 25% or more because they create buffers which slow down response time and interfere with communication. It is critical that development teams are allowed to organize themselves, and run themselves, in a manner which reflects the work that they’re trying to accomplish. 2. Build Quality In. If you routinely find problems with your verification process then your process must be defective. When it comes to governance, if you regularly find that developers are doing things that you don’t want them to do or are not doing things that they should be then your approach to governance must be at fault. The strategy is not to make governance yet another set of activities that you layer on top of your software process but instead should embed into your process to make it as easy as possible for developers to do the right thing. 3. Create Knowledge. Planning is useful, but learning is essential. 4. Defer Commitment. You do not need to start software development by defining a complete specification, but instead work iteratively. You can support the business effectively through flexible architectures that are change tolerant and by scheduling irreversible decisions to the last possible moment. This also requires the ability to closely couple end-to-end business scenarios to capabilities developed in potentially several different applications by different projects. 5. Deliver Fast. It is possible to deliver high-quality systems fast and in a timely manner. By limiting the work of a team to their capacity, by not trying to force them to do more than they are capable but instead ask them to self-organize and thereby determine what they can accomplish, you can establish a reliable and repeatable flow of work. 6. Respect People. Sustainable advantage is gained from engaged, thinking people. The implication is that you need a human resources strategy which is specific to IT, that you need to focus on enabling teams not on controlling them. 7. Optimize the Whole. If you want to govern your development efforts effectively you must look at the bigger picture, not just individual project teams. You need to understand the high-level business process which the individual systems support, processes which often cross multiple systems. You need to manage programs of interrelated systems so that you can deliver a complete product to your stakeholders. Measurements should address how well you’re delivering business value, because that is the raison d’etre of your IT department.
Based on our experiences, and guided by the 7 principles, Per Kroll and I identified 18 practices of lean development governance. We've organized these practices into 6 categories:1. The Roles & Responsibilities category: - Promote Self-Organizing Teams. The best people for planning work are the ones who are going to do it. - Align Team Structure With Architecture. The organization of your project team should reflect the desired architectural structure of the system you are building to streamline the activities of the team.
2. The Organization category: - Align HR Policies With IT Values. Hiring, retaining, and promoting technical staff requires different strategies compared to non-technical staff. - Align Stakeholder Policies With IT Values. Your stakeholders may not understand the implications of the decisions that they make, for example that requiring an “accurate” estimate at the beginning of a project can dramatically increase project risk instead of decrease it as intended.
3. The Processes category: - Adapt the Process. Because teams vary in size, distribution, purpose, criticality, need for oversight, and member skillset you must tailor the process to meet a team’s exact needs. - Continuous Improvement. You should strive to identify and act on lessons learned throughout the project, not just at the end. - Embedded Compliance. It is better to build compliance into your day-to-day process, instead of having a separate compliance process that often results in unnecessary overhead. - Iterative Development. An iterative approach to software delivery allows progressive development and disclosure of software components, with a reduction of overall failure risk, and provides an ability to make fine-grained adjustment and correction with minimal lost time for rework. - Risk-Based Milestones. You want to mitigate the risks of your project, in particular business and technical risks, early in the lifecycle. You do this by having throughout your project several milestones that teams work toward.
4. The Measures category: - Simple and Relevant Metrics. You should automate metrics collection as much as possible, minimize the number of metrics collected, and know why you’re collecting them. - Continuous Project Monitoring. Automated metrics gathering enables you to monitor projects and thereby identify potential issues so that you can collaborate closely with the project team to resolve problems early.
5. The Mission & Principles category: - Business-Driven Project Pipeline. You should invest in the projects that are well-aligned to the business direction, return definable value, and match well with the priorities of the enterprise. - Pragmatic Governance Body. Effective governance bodies focus on enabling development teams in a cost-effective and timely manner. They typically have a small core staff with a majority of members being representatives from the governed organizations. - Staged Program Delivery. Programs, which are collections of related projects, should be rolled out in increments over time. Instead of holding back a release to wait for a subproject, each individual subprojects must sign up to predetermined release date. If the subproject misses it skips to the next release, minimizing the impact to the customers of the program. - Scenario-Driven Development. By taking a scenario-driven approach, you can understand how people will actually use your system, thereby enabling you to build something that meets their actual needs. The whole cannot be defined without understanding the parts, and the parts cannot be defined in detail without understanding the whole.
6. The Polices & Standards category: - Valued Corporate Assets. Guidance, such as programming guidelines or database design conventions, and reusable assets such as frameworks and components, will be adopted if they are perceived to add value to developers. You want to make it as easy as possible for developers to comply to, and more importantly take advantage of, your corporate IT infrastructure. - Flexible Architectures. Architectures that are service-oriented, component-based, or object-oriented and implement common architectural and design patterns lend themselves to greater levels of consistency, reuse, enhanceability, and adaptability. - Integrated Lifecycle Environment. Automate as much of the “drudge work”, such as metrics gathering and system build, as possible. Your tools and processes should fit together effectively throughout the lifecycle.
The URLs for the 3 articles:Principles and Organizations: http://www.ibm.com/developerworks/rational/library/jun07/kroll/Processes and Measures: http://www.ibm.com/developerworks/rational/library/jul07/kroll_ambler/Roles and Policies: http://www.ibm.com/developerworks/rational/library/aug07/ambler_kroll/
The URL for the white paper:https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=swg-ldg
The URL for the webcast:https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?lang=en_US&source=dw-c-wcsdpr&S_PKG=112907C[Read More
A recurring discussion that I have with experienced agile developers is what it means to take a disciplined agile approach. The conversation usually starts off by some saying "but it already requires discipline to do agile", something that I fully agree with, followed by "therefore 'disciplined agile' is merely a marketing term", something which I don't agree with. The challenge with the "standard" agile discipline is that it is often focused on construction activities within a single project team, clearly important but also clearly not the full picture. There's more to an agile project than construction, and there's more to most IT departments than a single development project. In short, there are many opportunities for IT professionals to up their discipline, and thereby up their effectiveness, opportunities which we make explicit in the Disciplined Agile Delivery (DAD) framework.
Let's explore the many aspects to taking a disciplined agile approach:
You adopt "standard" agile discipline
. Aspects of agile which require discipline
include adopting practices such as test-driven development (TDD), active stakeholder participation, working collaboratively, shortening the feedback cycle
, and many more. These strategies are a great start to becoming disciplined IT professionals.
You take a goal-driven approach
. When we first started working on the DAD framework I didn't want to create yet another prescriptive framework, particularly given Rational's track record with the Rational Unified Process (RUP) framework. Rational has been pilloried for years for the prescriptive nature of RUP, which is unfortunate because there are a lot of great ideas in RUP that agile teams can benefit from, some of which we adopted in DAD and many of which are being actively reinvented with the agile community even as you read this. Furthermore, there are many prescriptive elements of the Scrum method that can get teams in trouble. For example, Scrum prescribes that you hold a daily stand up meeting, often called a Scrum meeting, where everyone should answer three questions. That's a great approach for teams new to agile, but it proves problematic in many situations due to it's prescriptive nature. Do you really need to do this once a day? I've been on teams where we held coordination meetings twice a day and others only once a week. Do you really need to stand up? I've been on geographically distrubited agile teams where many of us were sitting down during coordination calls. Do you really need to answer three questions, two of which are clearly focused on status regardless of claims otherwise? I've been on lean teams where we met around our Kanban board and focused on potential blockers. The answers to these questions depends on the context of the situation you find yourself in. The challenge, at least from the point of view of a process framework, is how do you avoid falling into the trap of being overly prescriptive. The strategy we adopted in DAD is to take a goal-driven approach. The observation is that regardless of the situation you find yourself in there are common goals your team will need to fulfill. For example, at the beginning of a project common goals include developing an initial plan, initially exploring the scope, initially identifying a technical strategy, and securing initial funding (amongst others). Throughout construction you should coordinate your activities, improve the quality of your ecosystem, and produce a potentially consumable solution on a regular basis (more on this below). So, instead of prescribing a daily stand up meeting the DAD framework instead indicates you should coordinate your activities, and gives several options for doing so (one of which is a Scrum meeting). More importantly DAD describes the advantages and disadvantages of your options so that you can make the choice that's best suited for the situation your team finds itself in (see this blog posting
for a detailed example of the types of tables included in the DAD book to help you through such process tailoring decisions). In short, our experience is that it requires discipline to take a goal driven approach
to agile delivery over the prescriptive strategies in other agile processes.
You take a context-driven approach
. There are many tailoring factors, which I describe in the Software Development Context Framework (SDCF)
, which you need to consider when making process, tooling, and team structure decisions. For example, a large team will adopt a different collection of practices and tools than a small team. A geographically distributed team will adopt a different strategy than a team that is co-located. You get the idea. Other tailoring factors include compliance, team culture, organization culture, technical complexity, domain complexity, and project type. It requires discipline to recognize the context of the situation you find yourself in and then act accordingly.
You deliver potentially consumable solutions
. One of the observations that we made early in the development of the DAD framework was that disciplined agile teams produce potentially consumable solutions, not just potentially shippable software. Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. For example, not only are we writing software but we may also be updating the hardware on which it runs, writing supporting documentation, evolving the business processes around the usage of the system, and even evolving the organizational structure of the people working with the system. In other words, disciplined agilists focus on solutions over software
. Furthermore, "potentially shippable" isn't sufficient: not only should it be shippable but it should also be usable and should be something people want to use. In other words it should be consumable (a concept DAD adopted from IBM's Outside In Development
). Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "
such as user interface design and process design to name just two.
The incremental delivery of potentially consumable solutions on an incremental basis requires discipline
to do successfully. DAD teams focus on repeatable results not repeatable processes
You are enterprise aware
. Whether you like it or not, as you adopt agile you will constrained by the organizational ecosystem, and you will need to act accordingly. It takes discipline to work with enterprise professionals such as enterprise architects, data admistrators, portfolio managers, or IT governance people who may not be completely agile yet, and have the patience to help them. It takes discipline to work with your operations and support staff in a DevOps
manner throughout the lifecycle, particularly when they may not be motivated to do so. It requires discipline to accept and potentially enhance existing corporate development conventions (programming guidelines, data guidelines, UI guidelines, ...). It requires discipline to accept that your organization has an existing technology roadmap that you should be leveraging, building out, and in some cases improving as you go. In short, enterprise awareness requires a level of discipline
not typically seen on many agile teams.
You adopt a full delivery lifecycle
. Empirically it is very easy to observe that at the beginning of an agile project there are some activities that you need to perform to initiate the project. Similarly at the end of the project there are activities that you need to perform to release the solution into production or the marketplace. The DAD process framework addresses the effort required for the full delivery effort, including project initiation, construction, and deployment. Our experience is that it requires discipline on the part of IT professionals to include explicit phases
for Inception/Initation, Construction, and Transition/Deployment and more importantly to focus the appropriate amount of effort on each. One danger of explicit phases is that you run the risk of taking what's known as a Water-Scrum-Fall
approach, a term coined by Dave West the person who wrote the forward for the DAD book, where you take an overly heavy/traditional approach to inception and transition in combination with a lighter agile approach to construction. Water-Scrum-Fall occurs because many organizations haven't made a full transition to agile, often because they think it's only applicable to construction. Our experience is that you can be very agile in your approach to inception and transition, experience we've built into the DAD framework. Having said that it clearly requires discipline to keep inception activities short
and similarly it requires discipline to reduce the "transition phase" to an activity
You adopt a wider range of roles
. An interesting side effect of adopting a full delivery lifecycle is that you also need to adopt a more robust set of roles. For example, the Scrum method suggests three roles - Scrum Master, Product Owner, and Team Member - a reflection of the Scrum lifecycle's construction focus. DAD suggests three primary roles - Team Lead, Product Owner, Team Member, Architecture Owner
, and Stakeholder - as well as five secondary roles which may appear at scale.
You embrace agile governance
. Governance establishes chains of responsibility, authority and communication in support of the overall enterprise’s goals and strategy. It also establishes measurements, policies, standards and control mechanisms to enable people to carry out their roles and responsibilities effectively. You do this by balancing risk versus return on investment (ROI), setting in place effective processes and practices, defining the direction and goals for the department, and defining the roles that people play with and within the department. It requires discipline to adopt an agile approach to governance
, and that's something built right into the DAD framework.
activities are evolutionary (iterative and incremental) and highly collaborative in nature. Initially requirements are explored at a high level via requirements envisioning
at the beginning of the project and the details are explored on a just-in-time (JIT) basis via iteration modeling
and model storming
activities. The way that you perform these agile practices, and the extent to which you do so, depends on the situation in which a project team finds itself. The Agile Scaling Model (ASM)
is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size. To see how this works, let's apply the concepts of the ASM to see how we would scale our agile approach to requirements.
First, let's consider how a small, co-located team would work. The first two categories of the ASM are core agile development and disciplined agile delivery
, the focus of both are small co-located teams in a fairly straightforward situation. In these situations simple techniques such as user stories
written on index cards and sketches on whiteboards
work very well, so the best advice that I can give is to stick with them. Some teams will take a test-driven development
(TDD) approach where they capture their requirements and design in the form of executable specifications
, although this sort of strategy isn't as common as it should be (yet!), likely because of the greater skill and discipline that it requires. Traditionalists often balk at this approach, believing that they need to document the requirements in some manner. But, for a small co-located team working in a collaborative manner, requirements documentation proves to be little more than busy work, often doing nothing more than justifying the existence of a business analyst who hasn't made the jump to agile yet. Don't get me wrong, there are good reasons to write some requirements documentation, and we'll see this in a minute, but you should always question any request for written specifications and try to find more effective ways to address the actual goal(s) motivating the request. Never forget that written documentation
is the least effective communication
option available to you.
Although inclusive tools
such as whiteboards and paper work well for requirements, for development activities you will need electronic tools. You will either put together an environment from point-specific tools or adopt something more sophisticated such as IBM Rational Team Concert (RTC)
which is already fully integrated and instrumented. RTC is a commercial tool, but luckily you can download a 10-license environment free of charge, which is just perfect for a small team. Larger teams, of course, will need to purchase licenses. One of the things that a disciplined agile delivery approach adds to core agile development is it addresses the full delivery life cycle, which is important because it explicitly includes pre-construction activities such as requirements envisioning. The first step in scaling agile techniques is to adopt a full delivery life cycle which covers the full range of activities required to initiate a project, produce the solution, and then release to solution to your end users.
More interesting is the third category of the ASM, Agility@Scale, and how its eight agile scaling factors
affect the way that you tailor your process and tooling strategy. Let's explore how each one could potentially affect your agile requirements strategy:
- Geographical distribution. The majority of agile teams are distributed in some manner -- some people are working in cubicles or private offices, on different floors, in different buildings, or even in different countries -- and when this happens your communication and coordination risks goes up. To counter this risk you will need to perform a bit more requirements envisioning up front to help ensure that everyone is working to the same vision, although this doesn't imply that you need to write detailed requirements speculations which would dramatically increase the risk to your project. Remember, agilists do just barely enough modeling and are prepared to iteratively elicit the details when they need to do so. The more distributed the team is the more likely they will need to adopt software-based requirements modeling tools such as IBM Rational Requirements Composer (RRC) which supports streamlined, agile requirements elicitation throughout the delivery life cycle. Index cards and whiteboards are great, but they're difficult to see if you're outside the room where they're posted. I've written a fair bit about distributed agile development in this blog.
- Team size. Some organizations, including IBM, are successfully applying agile techniques with teams of hundreds of people. A team of one hundred people will naturally work much differently than a team of ten people, or of one thousand people. Large teams are organized into collections of smaller teams, and the requirements for the overall project must be divvied up somehow between those teams. The implications are that as the team size grows you will need to invest a bit more time in initial requirements envisioning, and in initial architecture envisioning for that matter; you will need to use more sophisticated tools; and may need to use more sophisticated modeling techniques such as use cases and functional user interface prototypes. See large agile teams for more advice.
- Compliance requirement. When regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable you are likely going to be required to capture requirements specifications in some manner and to enact traceability between those requirements. However, I highly recommend that you read the actual regulations yourself and don't let bureaucrats interpret them for you (doesn't it always seem that their interpretation always results in an onerous, documentation heavy solution?) because I have yet to run into a regulation which required you to work in an ineffective manner. Managing your requirements as work items in RTC can often more than meet your regulatory requirements for documentation and traceability, although you may want to consider a tool such as IBM Rational RequisitePro for complex regulatory situations.
- Domain complexity. The manner in which you elicit requirements for a data entry application or an informational web site will likely be much simpler than for a bio-chemical process monitoring or air traffic control system. More complex domains will require greater emphasis on exploration and experimentation, including but not limited to prototyping, modeling, and simulation. Although user stories may be effective as a primary requirements artifact in simple domains, in more complex domains you are likely to find that you need to drive your requirements effort with more sophisticated modeling techniques.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. In these cases, particularly where the work is strictly organized between the various organizations (perhaps for security concerns), you may need a more sophisticated approach to managing the requirements. RTC enables you to organize the requirements between teams, and then to automatically track progress in real time via the RTC project dashboard.
- Technical complexity. The technical complexity of a solution can vary widely, from a single platform silo application to a multi-platform application working with legacy systems and data to a full-blown systems engineering effort. Complex technical domains, just like complex business domains, require more complex strategies for requirements elicitation and management. The requirements for your legacy systems are likely to have been captured using tools and techniques appropriate for that platform, for example the requirements for your COBOL application may have been captured using data flow diagrams and data models, whereas the requirements for your Java legacy application where captured using UML diagrams. The subteam working on the COBOL system might be using IBM Rational Application Developer (RAD) and RTC for Z whereas the Java subteam may use Eclipse with RTC. Because systems engineering projects can stretch on for years, particularly when the hardware is being developed in parallel to the software, sophisticated tooling such as IBM Rational DOORS is often used in these situations. For more information about systems engineering, see the IBM Rational Harmony process.
- Organizational complexity. Your approach to requirements elicitation and management will be affected by a host of organizational complexities, including your corporate culture. When the culture is flexible and collaborative you can be very agile in your approach to requirements, but as it becomes more rigid you become more constrained in what is considered acceptable and thus take on greater project risk. For example, many organizations still struggle with their approach to funding projects, often demanding that the project team provides an "accurate" estimate up front to which they will be held to. This in turn motivates risky behavior on the part of the development, including a "big requirements up front (BRUF)" approach where a detailed requirements speculation is developed early in the project. This is just one example of how questionable corporate culture can impact the way in which an agile team works.
- Enterprise discipline. Some organizations have enterprise-level disciplines, such as enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management in place. These disciplines can easily be agile and from what I can tell the more successful efforts appear to lean more towards the agile end of the spectrum rather than the traditional end. Having an enterprise business modeling effort underway will affect your project-level requirements strategy -- you'll be able to leverage existing models, have access to people who understand the domain at an enterprise level, and will likely need to map your project efforts back to your enterprise models. The enterprise modelers will likely be using tools such as IBM Rational System Architect or IBM Websphere Business Modeler.
It is important to note that the way that you tailor the agile practices that you follow, and the tools that you use, will reflect the situation that you find yourself in. In other words, you need to right size your process and the Agile Scaling Model (ASM) provides the context to help you do so. As you saw above, in simpler situations you will use the simpler tools and techniques which are commonly promoted within the core agile development community. But, when things become a bit more complex and one or more of the scaling factors applies you need to modify your approach -- just don't forget that you should strive to be as agile as you can be given the situation that you find yourself in.
On Nov 16 2011, Kim Werner, Agile Coach from ATSC and Liz Parnell, Solution Design Manager from Blue Cross Blue Shield of North Carolina (BCBSNC), gave a webcast
sharing their experiences regarding how BCBSNC adopted a few Agile techniques, with the help of some good coaching, and adopted some IBM Rational Jazz tools
(Rational Team Concert and Rational Requirements Composer) to reduce time to market and lower development costs. BCBCNC works in the highly-regulated healthcare industry, so faced a few interesting constraints when adopting agile.
Although it might not be obvious, and important success factor in adopting agile techniques
is to be able to determine whether a team is agile or not. The challenge that many organizations face is that many teams will claim to be agile, yet management, who often has little or no experience with agile approaches, cannot tell which claims are true and which are over zealous (I'm being polite). The following are the criteria that I suggest you look for in a disciplined agile team:1. Produce working software on a regular basis
. This is one of the 12 principles behind the Agile Manifesto
, and in my experience is a critical differentiator between the teams that are agile and those that are merely claiming it. Ideally the team should produce potentially shippable software each iteration. That doesn't mean that they'll deploy the system into production, or the marketplace, each iteration but they could if required to do so. Typically the team will deploy into a pre-production testing environment or a demo enviroment at the end of each iteration (or more often for that matter).2. Do continuous regression testing, and better yet take a Test-Driven Development (TDD) approach
. Agile developers test their work to the best of their ability, minimally doing developer regression testing via a continuous integration (CI) strategy
and better yet do developer-level TDD
. This approach enables development teams to find defects early, thereby reducing the average cost of addressing the defects, it also helps them to deliver higher quality code and to move forward safely when adding or changing functionality.3. Work closely with their stakeholders, ideally on a daily basis
. A common practice of agile teams is to have an on-site customer or product owner who prioritizes requirements and provides information on a timely manner to the team. Disciplined agile teams take it one step further and follow the practice active stakeholder participation
where the stakeholders get actively involved with modeling and sometimes even development.4. Are self-organizing within a governance framework
. Agile teams are self-organizing, which means that the people doing the work determines how the work will be done, they're not told by a manager who may not even be directly involved with the work how it will be done. In other words the team does its own planning, including scheduling and estimation. Disciplined agile teams are self governing within an effective governance framework
.5. Regularly reflect on how they work together and then act to improve on their findings
. Most agile teams hold a short meeting at the end of each iteration to reflect upon how well things are working and how they could potentially improve the way that they are working together. Sometimes this is done in a more formalized manner in the form of a retrospective
, but often it's done informally. The team then acts on one or more of their suggested improvements the next iteration. Disciplined agile teams take this one step further and measure their software process improvement (SPI) progress over time: the act of taking these measures, perhaps via a product such as Rational Self Check
, helps to keep the team on track in their SPI efforts.
I have yet to discover an ad-hoc development team which met all five criteria, and most of them rarely meet two or three.Further reading:
An inhibitor that I run into again and again within organizations that are still in the process of adopting agile development techniques is something that I call the "We're Special" anti-pattern. The people involved believe that their situation is special, that some unique factor in their environment makes it all but impossible to adopt agile techniques, and therefore they need to continue to work in the manner that they've always worked, regardless of the obvious inefficiencies of doing so.
An organization suffers from this agile adoption anti-pattern when they start giving domain-based or technology-based excuses for why they can't become more agile. For example, I've heard bank employees claim that "Agile works fine for building web sites, but we're building financial systems therefore agile won't work for us", telecom employees claim "Agile works fine for building financial systems, but we're building embedded systems therefore agile won't work for us", and government employees claim "Agile works fine for embedded systems, but we're building web sites therefore agile won't work for us." Needless to say I often struggle to not roll my eyes.
The reality is that the business domain that you're working in doesn't dictate your ability to adopt agile strategies. I've seen very successful agile projects in banks, insurance companies, manufacturing companies, retail companies, pharmacueticals (yes, life critical applications), telecoms, and government agencies. I've also met people working in those domains claim that they're special because of the inherent challenges of the domain.
Similarly, technology isn't an issue. I've seen project teams that were successful at applying agile approaches using Java, VB, COBOL, C, Linux, Windows, System Z, on PCs, and so on. Granted, some technology platforms suffer from a plethora of "agile tooling", PL/1 comes to mind and I'm sure that there's a few more niche platforms where this is the case, but with a little online searching it's often possible to find good open source tools out there (or what's stopping you from starting such a project?).
The primary issues around agile adoption are cultural in nature. Can you become more flexible in your thinking? Can you become more disciplined (agile requires greater levels of discipline than traditional approaches)? Can you build a collaborative environment with your business stakeholders? Can you move away from bureaucratic processes to ones which focus on adding real value? Can you invest in your IT staff to give them modern development skills required for test-driven development (TDD), continuous integration, and agile database techniques (to name a few)? Addressing the "people issues", the cultural issues, is the hard part of moving towards agile.
If you're looking for valid excuses for why your organization can't move to agile, here's some valid adoption inhibitors that I see in organizations all the time:
- Our project management office (PMO) has been trained and certified in traditional strategies and struggles to come to grips with agile project management techniques
- We don't have the funding to train, educate, and mentor people in agile techniques
- Middle management is threatened by agile strategies because their role clearly needs to change
- Senior technical staff, in particular our architects, don't accept the need to roll up their sleeves and be actively involved on project teams
- Our IT governance effort is not itself being governed effectively and is all but out of control, focusing on bureaucracy instead of enabling development teams to succeed
- Our data management group insists on working in a serial and documentation heavy manner
- Our QA/testing group insists on detailed requirement specifications
- Our staff is overly specialized, resulting in numerous hand-offs between analysts, developers, architects, testers, and so on
The above list is just the tip of the iceberg. The point is that the real problems that you face are cultural in nature, not domain-based nor technology-based. It is possible to overcome these inhibitors to success, but you need to understand that you're suffering from them, what the implications are, and how to overcome them. This is one of the facets of the Health Assessment portion of our new Measured Capability Improvement Framework (MCIF) service, the goal of which is to help organizations improve their internal IT processes. Although MCIF isn't specifically about becoming more agile, the reality is that there are a lot of great agile practices out there, and some of them are good options for your organization. Assuming of course you get over your misconception that you're special for some reason and instead accept the need that you've got some hard slogging ahead of you to improve your IT game.Further reading:
The explicit phases of the Unified Process -- Inception, Elaboration, Construction, and Transition -- and their milestones are important strategies for scaling agile software development to meet the real-world needs of modern organizations. Yes, I realize that this is heresy for hard-core agilists who can expound upon the evils of serial development, yet these very same people also take a phased approach to development although are loathe to admit it. The issue is that the UP phases are like seasons of a project: although you'll do the same types of activities all throughout a project, the extent to which you do them and the way in which you do them change depending on your goals. For example, at the beginning of a development project if you want to be effective you need to do basic things like identify the scope of the project, identify a viable architecture strategy, start putting together your team, and obtain support for the project. Towards the end of a project your focus is on the activities surrounding the deployment of your system into production, including end-of-lifecycle testing efforts, training, cleaning up of documentation, piloting the system with a subset of users, and so on. In between you focus on building the system, including analysis, design, testing, and coding of it. Your project clearly progresses through different phases, or call them seasons if the term phase doesn't suit you, whether your team is agile or not.
The UP defines four phases, each of which address a different kind of risk:1. Inception. This phase focuses on addressing business risk by having you drive to scope concurrence amongst your stakeholders. Most projects have a wide range of stakeholdres, and if they don't agree to the scope of the project and recognize that others have conflicting or higher priority needs you project risks getting mired in political infighting. In the Eclipse Way this is called the "Warm Up" iteration and in other agile processes "Iteration 0".2. Elaboration. The goal of this phase is to address technical risk by proving the architecture through code. You do this by building and end-to-end skeleton of your system which implements the highest-risk requirements. Some people will say that this approach isn't agile, that your stakeholders should by the only ones to prioritize requirements. Yes, I agree with that, but I also recognize that there are a wide range of stakeholders, including operations people and enterprise architects who are interested in the technical viability of your approach. I've also noticed that the high-risk requirements are often the high-business-value ones anyway, so you usually need to do very little reorganization of your requirements stack.3. Construction. This phase focuses on implementation risk, addressing it through the creation of working software each iteration. This phase is where you put the flesh onto the skeleton.4. Transition. The goal of this phase is to address deployment risk. There is usually a lot more to deploying software than simply copying a few files onto a server, as I indicated above. Deployment is often a complex and difficult task, one which you often need good guidance to succeed at.
Each phase ends with a milestone review, which could be as simple as a short meeting, where you meet with prime stakeholders who will make a "go/no-go" decision regarding your project. They should consider whether the project still makes sense, perhaps the situation has changed, and that you're addressing the project risks appropriately. This is important for "agile in the small" but also for "agile in the large" because at scale your risks are often much greater. Your prime stakeholders should also verify that you have in fact met the criteria for exiting the phase. For example, if you don't have an end-to-end working skeleton of your system then you're not ready to enter the Construction phase. Holding these sorts of milestone reviews improves your IT governance efforts by giving senior management valuable visibility at the level that they actually need: when you have dozens or hundreds of projects underway, you can't attend all of the daily stand up meetings of each team, nor do you even want to read summary status reports.
These milestone reviews enable you to lower project risk. Last Autumn I ran a survey via Dr. Dobb's Journal (www.ddj.com) which explore how people actually define success for IT projects and how successful we really were. We found that when people define success in their own terms that Agile has a 71% success rate compared with 63% for traditional approaches. Although it's nice to that Agile appears to be lower risk than traditional approaches, a 71% success rate still implies a 29% failure rate. The point is that it behooves us to actively monitor development projects to determine if they're on track, and if not either help them to get back on track or cancel them as soon as we possibly can. Hence the importance of occasional milestone reviews where you make go/no-go decisions. If you're interested in the details behind the project, they can be found at http://www.ambysoft.com/surveys/success2007.html .
Done right, phases are critical to your project success, particularly at scale. Yes, the traditional community seems to have gone overboard with phase-based approaches, but that doesn't mean that we need to make the same mistakes. Let's keep the benefit without the cost of needless bureaucracy.[Read More
- Does the team regularly produce value for their stakeholders?
- Does the team validate its own work to the best of its ability?
- Are stakeholders actively involved?
- Is the team self organizing?
- Does the team strive to improve their process?
Some interesting results include:
94% of teams which are claiming to be agile are providing value to stakeholders on a regular basis.
87% of teams which are claiming to be agile are validating their own work.
95% of teams which are claiming to be agile are working closely with stakeholders.
56% of teams which are claiming to be agile are self organizing.
88% of teams which are claiming to be agile are improving the process that they follow throughout the lifecycle.
Teams which are claiming to be agile often aren't. 53% of "agile teams" meet the five criteria, although 72% meet all but the self-organization criteria.
Teams which are moving towards agile but aren't there yet are reasonably close. 39% of those teams meet all five criteria and 63% meet all but self-organization.
I believe that there are several important implications:
- Whenever someone claims to be on an agile team you may want to explore that claim a bit deeper.
The low level of self organization may be an indicator of cultural challenges with organizations in that their project managers aren't giving up sufficient control. The Agility at Scale survey
in November 2009 found that 59% of respondents who indicated that their organization hadn't adopted agile techniques yet that a rigid culture was hampering their efforts. The IT Governance and Project Management
survey in July 2009 discovered that "questionable behaviors", many of which were ethically questionable (I'm being polite), were far too common within IT project management.
Although "agile teams" may not be as agile as they claim, they're still doing better than traditional V-model teams, as revealed (again) by the 2010 IT Project Success
If there was some sort of consensus within the agile community as to the criteria for determining whether a team is agile, I highly suspect that the agileness ratings would increase over time. What gets measured often improves.
However, how agile you are isn't anywhere near as important as getting better at what you're doing. So perhaps I'm barking up the wrong tree on this issue. ;-)
Modified by ScottAmbler
In my previous blog posting, http://www.ibm.com/developerworks/blogs/page/ambler?entry=strategies_for_distributed_agile_teams , I overviewed several strategies for improving your effectiveness at geographically distributed development (GDD). Those strategies were fairly generic and directly applicable to both traditional and agile development teams. In this posting I focus on strategies which are more agile in nature, although they could also be applied to more traditional approaches as well. These strategies are:
1. Get the whole team together at the beginning of the project. Your goals are to build rapport amongst the team, to get to know the people that you’re working with to facilitate communication later on, and to better understand the situation on the ground. The implication is that you will need to fly some people around, increasing your initial expenses, an investment that many organizations balk at. The reality is that you will eventually end up paying for travel anyway, either because you actually flew people around or because your communication costs are higher throughout the project. In short, don’t be penny wise and pound foolish.
2. Organize your team around the system architecture. The most effective way to organize a distributed team is around the architecture of the system that you are building, not around the job functions of the people involved. In other words, if your team is in Toronto, Rome, and Bangalore then each subteam should be responsible for one or more subsystems. It would be a mistake to organize the teams around job function, for example to have the architects and analysts in Toronto, the developers in Rome, and the testers in Bangalore because this structure would require significantly more documentation and other forms of communication to coordinate the teams, increasing both cost and risk. As I mentioned in my previous blog posting you will need to invest in some initial architecture envisioning at the beginning of a project to identify the subsystems and their public interfaces, and that to do that you’ll also need to do some initial requirements envisioning to drive this architecture effort. I suggest that you take an Agile Model Driven Development (AMDD) approach to this to enable you to gain the value from modeling without the costs and risks associated with up-front comprehensive modeling and documentation that get many traditional project teams in trouble.
3. Have “daily stand-up meetings”. A common practice on co-located agile teams is to have daily stand-up meetings where people share the status of what they did yesterday, what they intend to do today, and whether they’re running into any problems. These short meetings enable team coordination. Distributed teams can do this as well, the people in a given geographical location can hold local stand-up meetings and then representatives from each location can hold a shared meeting to coordinate the subteams. Whereas local stand-up meetings are held first thing in the morning, distributed daily stand-up meetings may need to be held at unusual times so as to include people at distant locations.
4. Have Ambassadors. Ambassadors are people who travel between sites, often technically senior people or senior business experts, to share information between the subteams. Getting the team together at the beginning of the project sets the foundation for communication, but without continual investment in maintaining effective collaboration between teams you run the risk of your subteams deviating from the overall strategy. These are typically short engagements, a week or two in length, because of the pressures it puts on the people doing the actual traveling. The implication is that you’ll have several people flying between sites at any given time on a reasonable rotation schedule. Because you’ll have some people flying around, your local team rooms should accommodate visitors by having one or more desks available for them to use when they’re visiting.
5. Have Boundary Spanners. A boundary spanner is someone who is located on site who focuses on enabling communication between subteams as well as within their subteam. On large distributed teams you’ll find that you have three flavors of boundary spanners – team leaders who take on project management responsibilities on the subteam, product owners who are responsible for representing the business within the subteam, and architecture owners responsible for technical direction on the team. These boundary spanners will work closely with their peers, having regular coordination meetings across all subteams as well as impromptu one-on-one meetings to deal with specific issues between individual subteams.
6. Ensure that the global team gets the credit it deserves. In both offshoring and nearshoring environments it’s common to see small teams in North America or Europe driving the efforts of significantly larger teams in another country. Yet, at the end of the project it always seems as if the smaller team, often because they work for the direct customer, gets the lion’s share of the credit – unless of course the project failed, then the subcontracting team often seems to get virtually all of the “credit”. This clearly isn’t fair, and it clearly doesn’t promote effective teamwork between the subteams in the future.
7. Take a lean approach to development governance. As I’ve written in the past, effective governance is based on enablement and collaboration instead of the traditional approaches of management and control. Good governance measures progress through regular delivery of working software, not through status reports or delivery of detailed specifications. Good governance is based on the idea of having a living process which changes to reflect lessons learned as your project progresses. In a previous blog posting at http://www.ibm.com/developerworks/blogs/page/ambler?entry=lean_development_governance I’ve discussed lean development governance in greater detail.
The strategies that I’ve described are clearly nothing more than common sense, something that can be said of all agile strategies. Sadly, as Mark Twain lamented, common sense isn’t very common in practice.[Read More
During the second week of August the Agile 2011 conference was held in Salt Lake City (SLC). As you likely know the Agile Manifesto was formulated 10 years ago in SLC so it was apropos to hold it there. There was some excitement around the 10 year anniversary of the manifesto, with a panel session with the 17 authors of it. Sadly there seemed to be little excitement around the efforts of the 10th anniversay agile workshop
in February which proposed a potential path forward for the agile community. I found the conference to be an evolutionary improvement over the conferences of the past few years, which is a very good thing because the focus since 2008 has moved beyond the "cool" new programming techniques to include the issues that enterprises face.
Starting at the Agile 2008 conference I've seen an uptick in interest in what I would consider some of the more mature topics in agile development, although I'm unfortunately still seeing significant confusion out there too, in part due to over-exuberence of people new to agile. For example, there's people still asking about basic issues about agile architecture
and agile database
techniques, although I was really happy to see more coherent discussions around scaling agile
. My own presentation about the Agile Scaling Model
was well attended and I suspect I opened a few people's eyes regarding the realities that we face (yes, there's a lot more to it than holding a "scrum of scrums", yeesh). We have a long way to go until people really start to understand scaling issues, but we're clearly on the path to getting there.
The conference show floor was interesting, with a wide range of vendors offering services and products focused on agile and lean. One thing that I noticed was many vendors had large monitors showing off their ability to support lean task boards, which for the most part they all looked the same. At the IBM booth we were showing off some of the Jazz tools
, in particular Rational Team Concert (RTC)
. For a long time now we've been giving away fully functional, with no time limit, licenses of RTC for teams of up to 10 people. Something worth checking out.
The Agile 201x conferences hosted by the Agile Alliance are always a good investment of your time and money, and Agile 2011 was no exception. See you at Agile 2012 in the great state of Texas!