I recently wrote a detailed article about Large Agile Teams that was a detailed walkthrough of how to structure agile teams of various sizes. I suspect that this is the most comprehensive online discussion of this topic. The article addressed the following topics:
Organizing Agile Teams. The article starts with a summary of the results of some industry research that I've done regarding the size of agile teams, showing that agile techniques are in fact being successfully applied on a variety of team sizes. It then goes into detail describing the organization structure of agile teams at various sizes. The article starts with a discussion of small agile teams, covering the common rhetoric of how to organize such a team and then making observations about what actually happens in practice. It then walks through two approaches to organizing medium sized teams of 15 to 50 people - a structure for a single team and a structure for a team of teams. Finally, it walks through how to organize a large agile program of 50+ people, focusing a fair bit on the need for a leadership team to coordinate the overall activities within the program. This advice is similar to what is seen in the SAFe framework although proves to be a bit more flexible and pragmatic in practice.
Supporting Large Agile Teams. The leadership structure to support a large agile team is reasonably straightforward once you understand the issues that such a team faces. In this section the article overviews the need for three important sub teams within your overall leadership team: The Product Delivery Team, The Product Management Team, and The Architecture Team. It also describes the need for an optional Independent Testing/Integration Team, something misleadingly labeled an integration team in SAFe, that reflects some of the known agile testing and quality practices that I've been writing about for several years.
Organizing subteams. The article includes a detailed discussion for how to organize the work addressed by agile sub teams within a large agile program. These strategies include feature teams, component teams, and internal open source teams. As you would expect with the Disciplined Agile Delivery (DAD) framework, the article clearly summarizes the advantages and disadvantages of each approach on provides guidance for when (not) to apply each one. I suspect you'll find this portion of the article to be one of the most coherent discussions of the Feature vs. Component team debate.
Tailoring agile practices. The article provides a detailed overview of how the various DAD process goals are tailored to address the issues faced by large teams. This advice includes: Do a bit more up-front requirements exploration; Do a bit more up-front architectural modelling; Do a bit more initial planning; Adopt more sophisticated coordination activities; Adopt more sophisticated testing strategies; and Integrate regularly. My hope is that you find this part of the article very illuminating regarding how the DAD framework provides flexible and lightweight advice for tailoring your approach to address the context of the situation that you face.
Other Resources. The article ends with a collection of links to other resources on this topic.
I welcome any feedback that you may have about Large Agile Teams.
Modificado por ScottAmbler
The following diagram summarizes a safe and proven strategy for scaling agile delivery strategies at the team level. There are three features of this strategy:
Basic agile and lean methods. At the base are methods such as Scrum, Extreme Programming (XP), Agile Modeling, Kanban, Agile Data, and many others. These methods are the source of practices, principles, and strategies that are the bricks from which a team will build its process.
Disciplined Agile Delivery (DAD). Building on mainstream methods is the DAD process decision framework, providing an end-to-end approach for agile software delivery. DAD provides the process mortar required to combine the process bricks, effectively doing the “heavy lifting” to describe how all of these great agile strategies fit together.
Agility at scale. Teams operating at scale apply DAD in a context driven manner to address the scaling factors that they face. These teams may be large, they may be geographically distributed in some way, they may face compliance constraints, they may be addressing a complex domain or technical environment, or they may be organizationally distributed in some manner. And usually combinations thereof. Without the solid foundation provided by DAD, agility at scale is incredibly difficult to achieve.
To scale agile successfully you must be able to tailor your approach to reflect the context that you face. To do this you must understand what your process and organizational structure options are and what tradeoffs each of those options has. Unless you’re a process expert, this can be challenging. This is where DAD’s process goal strategy comes in. Instead of prescribing a single way to do things, as we see in methods such as Scrum and SAFe, DAD instead captures your options in terms of process goals and guides you through making the decisions that best address the situation that you find yourself in. An example of a process goal diagram, in this case for the Inception phase goal Explore Initial Scope, is shown below.
The critical thing is that with a goal-driven approach it becomes much easier to understand how to scale agile. Depending on the context of the situation that a team finds itself in you will address each goal differently. The strategy for a small, co-located team facing a fairly straightforward situation in a non-regulatory environment works well for that team, the same strategy prescribed to a team in a different situation would put that team at risk of failure. Instead of prescribing a single way of working that is optimized for a specific situation we need to instead allow, and better yet enable, teams to adopt strategies that reflect the context of the situation that they face.
We’ve found that four of the twenty-two process goals seem to take about 80% of the tailoring impact. These goals are:
Explore Initial Scope. This is sometimes referred to as initially populating the backlog in the Scrum community, but there is far more to it than just doing that. This is an important goal for several reasons. First, your team needs to have at least a high level understanding of what they’re trying to achieve, they just don’t start coding. Second, in the vast majority of organizations IT delivery teams are asked fundamental questions such as what are you trying to achieve, how long will it take, and how much will it cost. Having an understanding of the scope of your effort is important input into answering those sorts of questions.
Identify Initial Technical Strategy. This is sometimes referred to as initial architecture envisioning or simply initial architecture modeling. You want to address this process goal for several reasons . First, the team should think through, at least at a high level, their architecture so as to identify a viable strategy for moving forward into Construction. A little bit of up-front thinking can increase your effectiveness as a team by getting you going in a good direction early in the lifecycle. It can also help to avoid injection of unnecessary technical debt as a result. Second, the team should strive to identify the existing organizational assets, such as web services, frameworks, or legacy data sources that they can potentially leverage while producing the new solution desired by their stakeholders. By doing this you increase the chance of reuse, thereby avoiding adding technical debt into your organizational ecosystem, and more importantly you reduce the time and cost of delivering a new solution as the result of reuse. You will do this by working with your organization’s enterprise architects, if you have any. This is an aspect of DAD’s philosophy of working in an enterprise aware manner.
Move Closer to a Deployable Release. This Construction phase process goal is important for three reasons. First, it encompasses the packaging aspects of solution development (other important development aspects are addressed by its sister goal Produce a Potentially Consumable Solution). This includes artifact/asset management options such as version control and configuration management as well as your team’s deployment strategy. Second, it provides deployment planning options, from not planning at all (yikes!) to planning late in the lifecycle to the more DevOps-friendly strategies of continuous planning and active stakeholder participation. Third, this goal covers critical validation and verification (V&V) strategies, many of which push testing and quality assurance “left in the lifecycle” so that they’re performed earlier and thereby reducing the average cost of fixing any defects.
Coordinate Activities. Although it is nice to believe that all of the coordination required by an agile team can be handled with a 15 minute stand up meeting every day the truth is far from that. This process goal addresses strategies for coordinating the work within a team, coordinating with other development teams (if needed), coordinating with IT groups such as your Enterprise Architects or data management group, and coordinating between subteams a programme or portfolio.
For a more detailed discussion of how these four process goals are the key to scaling your agile software delivery process, please refer to the whitepaper Scaling Agile Software Development: Disciplined Agile Delivery at Scale.
Modificado por ScottAmbler
I was recently involved in an online discussion about how to calculate the benefits realized by software development teams. As with most online discussions it quickly devolved into camps and the conversation didn’t progress much after that. In this case there was what I would characterize as a traditional project camp and a much smaller agile/lean product camp. Although each camp had interesting points, the important thing for me in the conversation was the wide cultural and experience gap between the people involved in the conversation.
The following diagram summarizes the main viewpoints and the differences between them. The traditional project camp promoted a strategy where the potential return on investment (ROI) for a project would be calculated, a decision would be made to finance the project based (partly) on that ROI, the project would run, the solution delivered into production, and then at some point in the future the actual ROI would be calculated. Everyone was a bit vague on how the actual ROI would be calculated, but they agreed that it could be done although would be driven by the context of the situation. Of course several people pointed out that it rarely works that way. Even if the potential ROI was initially calculated it would likely be based on wishful thinking and it would be incredibly unlikely that the actual ROI would be calculated once the solution was in production. This is because few organizations are actually interested in investing the time to do so and some would even be afraid to do so. Hence the planned and actual versions of the traditional strategy in the diagram.
The agile/lean camp had a very different vision. Instead of investing in upfront ROI calculation, which would have required a fair bit of upfront requirements modelling and architectural modelling to get the information, the idea was that we should instead focus on a single feature or small change. If this change made sense to the stakeholders then it would be implemented, typically on the order of days or weeks instead of months, and put quickly into production. If your application is properly instrumented, which is becoming more and more common given the growing adoption of DevOps strategies, you can easily determine whether the addition of the new feature/change adds real value.
Cultural differences get in your way
The traditional project camp certainly believed in their process. In theory it sounded good, and I’m sure you could make it work, but in practice it was very fragile. The long feedback cycle, potentially months if not years, pretty much doomed the traditional approach to measuring benefits of software development to failure. The initial ROI guesstimate was often a work of fiction and rarely would it be compared to actuals. The cultural belief in bureaucracy motivated the traditional project camp to ignore the obvious challenges with their chosen approach.
The agile/lean camp also believed in their strategy. In theory it works very well, and more and more organizations are clearly pulling this off in practice, but it does require great discipline and investment in your environment. In particular, you need investment in modern development practices such as continuous integration (CI), continuous deployment (CD), and instrumented solutions (all important aspects of a disciplined agile DevOps strategy). These are very good things to do anyway, it just so happens that they have an interesting side effect of making it easy (and inexpensive) to measure the actual benefits of changes to your software-based solutions. The cultural belief in short feedback cycles, in taking a series of smaller steps instead of one large one, and in their ability to automate some potentially complex processes motivated the agile/lean camp to see the traditional camp as hopeless and part of the problem.
Several people in the traditional project camp struggled to understand the agile/lean approach, which is certainly understandable given how different that vision is compared with traditional software development environments. Sadly a few of the traditionalists chose to malign the agile/lean strategy instead of respectfully considering it. They missed an excellent opportunity to learn and potentially improve their game. Similarly the agilists started to tune out, dropping out of the conversation and forgoing the opportunity to help others see their point of view. In short, each camp suffered from cultural challenges that prevented them from coherently discussing how to measure the benefits of software development efforts.
How Should You Measure the Effectiveness of Software Development?
Your measurement strategy should meet the following criteria:
Measurements should be actioned. Both the traditional and agile/lean strategies described above meet this criteria in theory. However, because few organizations appear willing to calculate ROI after deployment as the traditional approach recommends, in practice the traditional strategy rarely meets this criteria. It is important to note that I used the word actioned, not actionable. Key difference.
There must be positive value. The total cost of taking a measure must be less than the total value of the improvement in decision making you gain. I think that the traditional strategy falls down dramatically here, which is likely why most organizations don’t actually follow it in practice. The agile/lean strategy can also fall down WRT this criterion but is much less likely to because the feedback cycle between creating the feature and measuring it is so short (and thus it is easier to identify the change in results to the actual change itself).
The measures must reflect the situation you face. There are many things you can measure that can give you insight into the ROI of your software development efforts. Changes in sales levels, how often given screen or function is invoked, savings incurred from a new way of working, improved timeliness of information (and thereby potentially better decision making), customer retention, customer return rate, and many others. What questions are important to you right now? What measures can help provide insight into those questions? It depends on the situation that you face, there are no hard and fast rules. For a better understanding of complexity factors faced by teams, see The Software Development Context Framework.
The measures should be difficult to game. Once again, traditional falls down here. ROI estimates are notoriously flakey because they require people to make guesses about costs, revenues, time frames, and other issues. The measurements coming out of your instrumented applications are very difficult to game because they’re being generated as the result of doing your day-to-day business.
The strategy must be compatible with your organization. Once again, this is a “it depends” type of situation. Can you imagine trying to convince an agile team to adopt the traditional strategy, or vice versa? Yes, you can choose to improve over time.
Not surprisingly, I put a lot more faith in the agile/lean approach to measuring value. Having said that, I do respect the traditional strategy as there are some situations where it may in fact work. Just not as many as traditional protagonists may believe.
On Twitter one of the people that I follow recently tweeted in jest "I am waste". He had been tweeting about the problem that people will often pay consultants for their advice yet will not follow that advice once it's been provided (yet will often still keep paying for more advice). Perhaps in this situation his efforts were a waste, or perhaps the real issue was that the customer had a long learning process and hadn't yet come to the point where they were willing to act on the advice, we may never know. But I have to think that there are other situations where this person isn't a waste, regardless of his claims.
This got me thinking that something is a waste in one context yet in another context may be quite valuable. Or, as the old saying goes, one man's trash is another man's treasure.
For example, consider the following simple value stream:
[Activity A: 10 min] [Wait time: 20 min] [Activity B: 10 min]
Without considering the context, the wait time of 20 min represents 50% waste in the overall process that we should try to eliminate.
What if that wait time provides people with a much needed rest? With time to contemplate? With time to destress? Eliminating that wait time, or even reducing it, could result a degradation of performance. In this case, one person's waste (the wait time) is another person's treasure (rest time). The implication is that we need to work closely with the people intimately involved in a process if we're to help them to improve it.
Modificado por ScottAmbler
Recently I have been asked by several customer organizations to help them to understand how to account for the expense of agile software development. In particular, incremental delivery of solutions into production or the marketplace seem to be causing confusion with the financial people within these organizations. The details of accounting rules vary between countries, but the fundamentals are common. In order to get properly account for the costs incurred by software development teams you need to keep track of the amount of work performed and the type of work performed to develop a given solution. Time tracking doesn't have to be complex: at one customer developers spend less than five minutes a week capturing such information.
Why is Time Tracking Potentially Valuable?
There are several financial issues to be aware of:
Capitalization. For public companies capital expenses (CapEx) can potentially boost book value through the increase in assets (in this case a software-based solution) and increase in net income (due to lower operating expenses that year). On the other hand, operational expenses (OpEx) are accounted for in the year that they occur and thereby reduce net income which in turn reduces your organization's taxes for that year.
Matching. One of the goals of good accounting is to accurately reflect the net income of the enterprise and to prevent income manipulation or "smoothing". As such a key tenet is the principle of matching revenues with the appropriate expenses. For software this means that we expense the cost of the software over the lifetime of the asset against the income at that time. An implication of this is that capitalizing software development, when appropriate, before the software goes into production clearly violates the matching principle since there is no benefit of the asset until such time.
Tax Credits. In some countries you can even get tax credits for forms of software development that are research and development (R&D) in nature.
The point is that the way that a software developer's work is accounted for can have a non-trivial impact upon your organization's financial position.
What Do Agilists Think of Time Tracking?
So, I thought I'd run a simple test. Last week on LinkedIn's Agile and Lean Software Development group I ran a poll to see what people thought about time tracking. The poll provided five options (a limitation of LinkedIn Polls) to choose from:
Yes, this is a valuable activity (33% of responses)
Yes, this is a waste of time (39% of responses)
No, but we're thinking about doing so (2% of responses)
No, we've never considered this (18% of responses)
I don't understand what you're asking (5% of responses, one of which was mine so that I could test the poll)
The poll results reveal that we have a long way to go. Of the people inputting their time more of them believed it was a waste of time than understood it to be a valuable activity. When you stop and think about it, the investment of five minutes a week to track your time could potentially save or even earn your organization many hundreds of dollars. Looking at it from a dollar per minute point of view, it could be the highest value activity that a developer performs in a given week.
The discussion that ensued regarding the poll was truly interesting. Although there were several positive postings, and several neutral ones, many more were negative when it came to time tracking. Some comments that stood out for me included:
It's a colossal waste of time unless you're billing a customer by the hour.
We record time spent on new development work (as distinct from other tasks such as bug fixing in legacy code and so on) as this is capitalised as an asset and depreciated.
I think the *most* pointless example was where the managers told us what we should be putting in.
One day we will move past the "just do it" mentality and have some meaningful conversations and the reasons for what we do.
In my experience time tracking is a massive waste... of time. It's a poor substitute for management.
Why do you need to know more than the info available through Sprint Backlog, Sprint burndown and the daily standup?
Some of my teams (I am SM for three teams) are skeptical about this. They do not think that keeping track of task hours this way will be any more useful than the daily standup reports. And they do not believe that Management can resist the temptation to use task hours as a measure.
I think that there are several interesting implications from this discussion:
Agilists need to become more enterprise aware. It's clear to be really effective that agile delivery teams need a better understanding of the bigger picture, including mundane things such as tax implications of what they're doing. In Disciplined Agile Delivery (DAD) this is something that we refer to as being enterprise aware. There's far more to enterprise awareness than understanding pertinent accounting principles, for interest disciplined agile teams work towards a common technology roadmap and common business roadmap, but appreciating why time tracking is a potentially valuable activity would be a good start.
Management needs to communicate better. It's also clear that management needs to communicate more effectively regarding why they're asking people to track their time. To be fair, management themselves might not be aware of the tax implications themselves so may not be making effective use of the time data they're asking for.
Management needs to govern more effectively. Several people were clearly concerned about how management was going to use the time data (by definition they are measures) which could be a symptom of both poor communication as well as poor governance (unfortunately many developers have experiences where measures have been used against them, a failure of governance, and no longer trust their management teams to do the right thing as a result).
Time tracking should be streamlined. It was obvious from the conversation that several people worked in organizations where the time tracking effort had gotten completely out of hand. Spending 5 minutes a week is ok, and to be quite blunt should be more than sufficient, but spending fifteen minutes or more a day doing so is far too much. Over the years I've helped organizations design measurement programs and I've seen a lot of well-intention efforts become incredibly onerous and expensive for the people they were inflicted upon. I suspect it's time for a reality check in some of these organizations people were alluding to. A good heuristic is that for any measurement you should be able to indicate the real cost of collecting it, the use(s) that the information is being put to, and the value resulting from those uses. If you can't quickly and coherently do that then you need to take a hard look at why you continue to collect that metric. The lament "we might need it one day" is a symptom that you're wasting time and money.
Agile rhetoric is getting in the way. Some of the team-focused agile practices, such as burndown charts (or better yet ranged burndown charts) and stand up meetings may be preventing people from becoming enterprise aware because they believe that all of their management needs are being met by them.
You may be missing out on the benefits of time tracking. Many organizations are potentially leaving money on the table by not being aware of the implications of how to expense software development.
Disciplined agilists are enterprise aware. This is important for two reasons: First, you want to optimize your organizational whole instead of sub-optimize on project-related efforts; second, you can completely miss opportunities to add real value for your organization. In the anecdote I provided it was clear that many agile developers believe that an activity such as time tracking is a waste when that clearly doesn't have to be the case. Worse yet, although someone brought up the issues around capitalizing software development expenses early in the conversation a group of very smart and very experienced people still missed this easy opportunity to see how they could add value to their organization.
Granted, time tracking on an agile project team is nowhere near as sexy as topics such as continuous integration (CI), TDD, the definition of done, continous architecture, or many more. But you know what? Although it's a mind-numbingly mundane issue it is still an important one. 'Nuff said (I hope).
The Disciplined Agile Consortium
recently launched a certification programme for practitioners of Disciplined Agile Delivery (DAD)
. There are three practitioner certifications
- Disciplined Agile Yellow Belt. This beginner certification indicates to colleagues and employers that you are eager to learn Disciplined Agile Delivery (DAD) strategies that enable you to increase your skills and abilities as a software professional.
- Disciplined Agile Green Belt. This intermediate certification indicates that you are experienced at DAD and are on your way to becoming a generalizing specialist. You have the potential to be a “junior coach” under the guidance of a senior coach (someone who is likely a Disciplined Agile Black Belt).
- Disciplined Agile Black Belt. This expert certification indicates that you are a trusted expert with significant proficiency at DAD. You can coach other people in disciplined agile strategies and advise organizations in the adoption and tailoring of the DAD framework.
Differentiate yourself in the marketplace. Certification in Disciplined Agile Delivery (DAD) means something to clients and employers because it needs to be earned. Certification in DAD tells the marketplace you understand how to deliver an agile solution from end-to-end with experience in enterprise-class development.
As an aside, the Disciplined Agile Consortium is proud to have IBM Rational's Richard Knaster and Carson Holmes the president of the Global Rational User Group (GRUG) on our board of advisors.
A recurring discussion that I have with experienced agile developers is what it means to take a disciplined agile approach. The conversation usually starts off by some saying "but it already requires discipline to do agile", something that I fully agree with, followed by "therefore 'disciplined agile' is merely a marketing term", something which I don't agree with. The challenge with the "standard" agile discipline is that it is often focused on construction activities within a single project team, clearly important but also clearly not the full picture. There's more to an agile project than construction, and there's more to most IT departments than a single development project. In short, there are many opportunities for IT professionals to up their discipline, and thereby up their effectiveness, opportunities which we make explicit in the Disciplined Agile Delivery (DAD) framework.
Let's explore the many aspects to taking a disciplined agile approach:
You adopt "standard" agile discipline
. Aspects of agile which require discipline
include adopting practices such as test-driven development (TDD), active stakeholder participation, working collaboratively, shortening the feedback cycle
, and many more. These strategies are a great start to becoming disciplined IT professionals.
You take a goal-driven approach
. When we first started working on the DAD framework I didn't want to create yet another prescriptive framework, particularly given Rational's track record with the Rational Unified Process (RUP) framework. Rational has been pilloried for years for the prescriptive nature of RUP, which is unfortunate because there are a lot of great ideas in RUP that agile teams can benefit from, some of which we adopted in DAD and many of which are being actively reinvented with the agile community even as you read this. Furthermore, there are many prescriptive elements of the Scrum method that can get teams in trouble. For example, Scrum prescribes that you hold a daily stand up meeting, often called a Scrum meeting, where everyone should answer three questions. That's a great approach for teams new to agile, but it proves problematic in many situations due to it's prescriptive nature. Do you really need to do this once a day? I've been on teams where we held coordination meetings twice a day and others only once a week. Do you really need to stand up? I've been on geographically distrubited agile teams where many of us were sitting down during coordination calls. Do you really need to answer three questions, two of which are clearly focused on status regardless of claims otherwise? I've been on lean teams where we met around our Kanban board and focused on potential blockers. The answers to these questions depends on the context of the situation you find yourself in. The challenge, at least from the point of view of a process framework, is how do you avoid falling into the trap of being overly prescriptive. The strategy we adopted in DAD is to take a goal-driven approach. The observation is that regardless of the situation you find yourself in there are common goals your team will need to fulfill. For example, at the beginning of a project common goals include developing an initial plan, initially exploring the scope, initially identifying a technical strategy, and securing initial funding (amongst others). Throughout construction you should coordinate your activities, improve the quality of your ecosystem, and produce a potentially consumable solution on a regular basis (more on this below). So, instead of prescribing a daily stand up meeting the DAD framework instead indicates you should coordinate your activities, and gives several options for doing so (one of which is a Scrum meeting). More importantly DAD describes the advantages and disadvantages of your options so that you can make the choice that's best suited for the situation your team finds itself in (see this blog posting
for a detailed example of the types of tables included in the DAD book to help you through such process tailoring decisions). In short, our experience is that it requires discipline to take a goal driven approach
to agile delivery over the prescriptive strategies in other agile processes.
You take a context-driven approach
. There are many tailoring factors, which I describe in the Software Development Context Framework (SDCF)
, which you need to consider when making process, tooling, and team structure decisions. For example, a large team will adopt a different collection of practices and tools than a small team. A geographically distributed team will adopt a different strategy than a team that is co-located. You get the idea. Other tailoring factors include compliance, team culture, organization culture, technical complexity, domain complexity, and project type. It requires discipline to recognize the context of the situation you find yourself in and then act accordingly.
You deliver potentially consumable solutions
. One of the observations that we made early in the development of the DAD framework was that disciplined agile teams produce potentially consumable solutions, not just potentially shippable software. Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. For example, not only are we writing software but we may also be updating the hardware on which it runs, writing supporting documentation, evolving the business processes around the usage of the system, and even evolving the organizational structure of the people working with the system. In other words, disciplined agilists focus on solutions over software
. Furthermore, "potentially shippable" isn't sufficient: not only should it be shippable but it should also be usable and should be something people want to use. In other words it should be consumable (a concept DAD adopted from IBM's Outside In Development
). Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "
such as user interface design and process design to name just two.
The incremental delivery of potentially consumable solutions on an incremental basis requires discipline
to do successfully. DAD teams focus on repeatable results not repeatable processes
You are enterprise aware
. Whether you like it or not, as you adopt agile you will constrained by the organizational ecosystem, and you will need to act accordingly. It takes discipline to work with enterprise professionals such as enterprise architects, data admistrators, portfolio managers, or IT governance people who may not be completely agile yet, and have the patience to help them. It takes discipline to work with your operations and support staff in a DevOps
manner throughout the lifecycle, particularly when they may not be motivated to do so. It requires discipline to accept and potentially enhance existing corporate development conventions (programming guidelines, data guidelines, UI guidelines, ...). It requires discipline to accept that your organization has an existing technology roadmap that you should be leveraging, building out, and in some cases improving as you go. In short, enterprise awareness requires a level of discipline
not typically seen on many agile teams.
You adopt a full delivery lifecycle
. Empirically it is very easy to observe that at the beginning of an agile project there are some activities that you need to perform to initiate the project. Similarly at the end of the project there are activities that you need to perform to release the solution into production or the marketplace. The DAD process framework addresses the effort required for the full delivery effort, including project initiation, construction, and deployment. Our experience is that it requires discipline on the part of IT professionals to include explicit phases
for Inception/Initation, Construction, and Transition/Deployment and more importantly to focus the appropriate amount of effort on each. One danger of explicit phases is that you run the risk of taking what's known as a Water-Scrum-Fall
approach, a term coined by Dave West the person who wrote the forward for the DAD book, where you take an overly heavy/traditional approach to inception and transition in combination with a lighter agile approach to construction. Water-Scrum-Fall occurs because many organizations haven't made a full transition to agile, often because they think it's only applicable to construction. Our experience is that you can be very agile in your approach to inception and transition, experience we've built into the DAD framework. Having said that it clearly requires discipline to keep inception activities short
and similarly it requires discipline to reduce the "transition phase" to an activity
You adopt a wider range of roles
. An interesting side effect of adopting a full delivery lifecycle is that you also need to adopt a more robust set of roles. For example, the Scrum method suggests three roles - Scrum Master, Product Owner, and Team Member - a reflection of the Scrum lifecycle's construction focus. DAD suggests three primary roles - Team Lead, Product Owner, Team Member, Architecture Owner
, and Stakeholder - as well as five secondary roles which may appear at scale.
You embrace agile governance
. Governance establishes chains of responsibility, authority and communication in support of the overall enterprise’s goals and strategy. It also establishes measurements, policies, standards and control mechanisms to enable people to carry out their roles and responsibilities effectively. You do this by balancing risk versus return on investment (ROI), setting in place effective processes and practices, defining the direction and goals for the department, and defining the roles that people play with and within the department. It requires discipline to adopt an agile approach to governance
, and that's something built right into the DAD framework.
It's been awhile since I've posted anything here, but that will soon change. I'm excited about some ideas that I have for upcoming blog postings around disciplined agile architecture and what it means to take a disciplined approach to agile solution delivery. Organizations around the world are finding that Disciplined Agile Delivery
(DAD) provides a solid foundation from which to scale agile, and I'm going to continue sharing my observations and experiences about scaling DAD here in this blog.
As many of you may know I left IBM in June 2012, after a six-year stint as Chief Methodologist for IT within IBM Rational, to form Scott Ambler + Associates
with Mark Lines. Mark is my co-author on the IBM Press book Disciplined Agile Delivery
, a topic I've written about extensively in this blog over the years. Since I left IBM I've remained in contact with several key people within Rational and have started working with them on several fronts. For example Walker Royce, Alan Brown, and myself are co-authoring a paper about scaling agile which we hope will be accepted at a prestigious academic conference in 2013. I'm also working with IBM Rational at the upcoming Agile Development Conference East
in Orlando, November 4-9. Both Mark and I will be presenting on DAD and Rational will have a booth and be throwing a party on Wednesday night which I'm looking forward to. Rational has thrown some pretty good conference parties in the past and I'm guessing that they will do so this time too. Hope to see you there.
In short, stay tuned as there's some exciting stuff coming your way soon.
The basic idea behind DevOps
is that your development strategy and operations strategy should reflect one another, that you should strive to optimize the whole IT process. This implies that development teams should work closely with your operations staff to deliver new releases smoothly into production and that your operations staff should work closely with development teams to streamline critical production issues.
DevOps has its source in agile software development, and it is an explicit aspect of the Disciplined Agile Delivery (DAD)
process framework. As a result there is a collection of agile development strategies which enable effective DevOps throughout the agile delivery lifecycle. These strategies include:
- Initial requirements envisioning. Disciplined agile teams invest time at the beginning of the project to identify the high-level scope in a light-weight, collaborative manner. This includes common operations requirements such as the need to backup and restore data sources, to instrument the solution so that it can be monitored in real time by operations staff, or to architect the solution in a modular manner to enable easier deployment.
- Initial architecture envisioning. Disciplined agile teams will also identify a viable architectural strategy which reflects the requirements of their stakeholders and your organization’s overall architectural strategy (hence the need to work closely with your enterprise architects and operations staff). One goal is to ensure that the team is building (or buying) a solution which will work well with the existing operational infrastructure and to begin negotiating any infrastructural changes (such as deploying new technologies) early in the project. Another goal is to ensure that operations-oriented requirements are addressed by the architecture from the very start.
- Initial release planning. As part of release planning the disciplined agile team works closely with their operations group to identify potential release windows to aim for, any release blackout periods to avoid, and the need for operations-oriented milestone reviews later in the lifecycle (if appropriate).
- Active stakeholder participation. Disciplined agile teams work closely with their stakeholders, including both operations and support staff, all the way through the lifecycle to ensure that their evolving needs are understood.
- Continuous integration (CI). This is a common technical agile practice where the solution is built/compiled, regression tested, and maybe even run through code analysis tools. CI promotes greater quality which in turn enables easier releases into production.
- Parallel independent testing. For enterprise-class development or at scale, particularly when the domain or technology is very complex or in regulatory environments, disciplined agile team will find they need to support their whole team testing efforts with an independent test team running in parallel to the development team. These testing issues often include validation of non-functional requirements – such as security, performance, and availability concerns – and around production system integration. All of these issues are of clear importance for operations departments.
- Continuous deployment. With this practice you automate the promotion of your working solution between environments. By automating as much of the deployment effort as possible, and by running it often, the development team increases the chance of a successful deployment and thereby reduces the risk to the operations environment. Note that deployment into production is generally not automatic, as this is an important decision to be made by your operations/release manager(s).
- Continuous documentation. With this practice supporting documentation, including operations and support documentation, is evolved throughout the lifecycle in concert with the development of new functionality.
- Production release planning. This is the subset of your release planning efforts which focuses on the activities required to deploy into production.
- Production readiness reviews. There should be at least one review, performed by the person(s) responsible for your operations environment, before the solution is deployed into production. The more critical the system, the more product readiness reviews may be required.
- End-of-lifecycle testing. Minimally you will need to run your full automated regression test suite against your baselined code once construction ends. There may also be manual acceptance reviews or testing to be performed, and any appropriate fixing and retesting required to ensure that the solution is truly ready for production.
There’s more to it though than simply adopting some good practices. Your process must also embrace several supporting philosophies. The Disciplined Agile Delivery (DAD)
process framework not only adopts the practices listed above, and more, but it also promotes several philosophies which enable DevOps:
- Delivery teams should be enterprise aware, that they should work with people such as operations staff and enterprise architects to understand and work towards a common operational infrastructure for your organization.
- Operations and support people should be recognized as key stakeholders of the solution being worked on.
- The delivery team should focus on solutions over software. Software is clearly important, but we will often provide new or upgraded hardware, supporting documentation (including operations and support procedures), change the business/operational processes that stakeholders follow, and even help change the organizational structure in which our stakeholders work.
- Your process should include an explicit governance strategy. Effective governance strategies motivate and enable development teams to leverage and enhance the existing infrastructure, follow existing organizational conventions, and work closely with enterprise teams – all of which help to streamline operations and support of the delivered solutions.
For more detail about this topic, I think that you will find the article I wrote for the December 2011 issue of Cutter IT Journal entitled “Disciplined Agile Delivery and Collaborative DevOps
” to be of value.
In November 2011 Paul Gorans, the Accelerated Solution Delivery (ASD) practice lead in IBM GBS, and I ran an agile adoption survey
. The survey explored a range of issue, including the factors that appear to be associated with the success and failure of agile project teams. Paul wrote up his thoughts in his Agile State of the Art Survey
article on ibm.com and I did the same for Dr Dobb's Journal in Agile Success Factors
. This blog posting summarizes the results of the survey.
Factors which appear to accelerate agile adoption include:
- People are assigned to a single team
- Development teams have easy access to business expertise
- Development teams are organized for agile delivery (not traditional)
- Your organization has an agile support group/community of excellence
- Your organization is explicitly addressing barriers to agility
- There is executive sponsorship for agile
- Agile teams are measured on value creation
- Your organization's IT governance strategy includes an agile path
Factors which appear to decelerate agile adoption include:
- Agile teams are measured using traditional metrics
A few days later someone asked a series of questions that I thought would make an interesting blog posting, so here goes:How much of IBM's projects (in percentage) are agile at the moment?
I don’t have exact numbers, but I believe that 90%+ of our teams in SWG are applying agile techniques in practical ways that make sense for their projects. The primary goal is to be effective – in frequent releases, higher quality, and happy customers – not just agile. By the way, there is roughly 30,000 developers in SWG.Can all of IBM's projects work with an agile methodology?
It’s certainly possible, but it may not always make sense. Products that are in maintenance mode with few bugs or feature requirements may not benefit as much from agile practices -- those teams will likely continue to do whatever it is that they have been doing. Having said that, it's still highly desirable to apply agile techniques on maintenance projects.
Also, agile methods can be harder to use on some projects than others, for example, around hardware development. As a general rule, I believe that the majority of software projects can benefit from agile techniques. The primary determinant of whether a team can adopt agile techniques is culture and skill – not team size, the domain, or the degree of geographic distribution. That notion surprises many people who think that large agile teams
or geographically distributed agile teams
can’t succeed in adopting agile practices.Are agile projects sub-parts of large waterfall projects?
In some cases, that may happen. I’m sure it’s also true in reverse. We see many customers who are migrating from waterfall projects to a more agile way of doing things, and they often start this migration with smaller sub-projects. At IBM, we have tens of thousands of developers worldwide on hundreds of teams, so we have examples of pretty much any combination of agile, iterative, and traditional practices that you can imagine. There’s definitely not one size that fits all, which is a key aspect of the Disciplined Agile Delivery (DAD)
process framework.What do you think the impact of these numbers will be on the PM community?
The IBM PM community is embracing agile. And the reality is that a majority of development organizations around the world are moving to agile now as well (as much as 80% in some of the recent studies I’ve seen). I look forward to the increased adoption of agile methods by the PM community in general. The fact that PMI now offers an Agile Certified Practitioner training program certainly underscores the fact that agile practices are being adopted widely in the mainstream which is a great thing to see.
On Nov 16 2011, Kim Werner, Agile Coach from ATSC and Liz Parnell, Solution Design Manager from Blue Cross Blue Shield of North Carolina (BCBSNC), gave a webcast
sharing their experiences regarding how BCBSNC adopted a few Agile techniques, with the help of some good coaching, and adopted some IBM Rational Jazz tools
(Rational Team Concert and Rational Requirements Composer) to reduce time to market and lower development costs. BCBCNC works in the highly-regulated healthcare industry, so faced a few interesting constraints when adopting agile.
During the second week of August the Agile 2011 conference was held in Salt Lake City (SLC). As you likely know the Agile Manifesto was formulated 10 years ago in SLC so it was apropos to hold it there. There was some excitement around the 10 year anniversary of the manifesto, with a panel session with the 17 authors of it. Sadly there seemed to be little excitement around the efforts of the 10th anniversay agile workshop
in February which proposed a potential path forward for the agile community. I found the conference to be an evolutionary improvement over the conferences of the past few years, which is a very good thing because the focus since 2008 has moved beyond the "cool" new programming techniques to include the issues that enterprises face.
Starting at the Agile 2008 conference I've seen an uptick in interest in what I would consider some of the more mature topics in agile development, although I'm unfortunately still seeing significant confusion out there too, in part due to over-exuberence of people new to agile. For example, there's people still asking about basic issues about agile architecture
and agile database
techniques, although I was really happy to see more coherent discussions around scaling agile
. My own presentation about the Agile Scaling Model
was well attended and I suspect I opened a few people's eyes regarding the realities that we face (yes, there's a lot more to it than holding a "scrum of scrums", yeesh). We have a long way to go until people really start to understand scaling issues, but we're clearly on the path to getting there.
The conference show floor was interesting, with a wide range of vendors offering services and products focused on agile and lean. One thing that I noticed was many vendors had large monitors showing off their ability to support lean task boards, which for the most part they all looked the same. At the IBM booth we were showing off some of the Jazz tools
, in particular Rational Team Concert (RTC)
. For a long time now we've been giving away fully functional, with no time limit, licenses of RTC for teams of up to 10 people. Something worth checking out.
The Agile 201x conferences hosted by the Agile Alliance are always a good investment of your time and money, and Agile 2011 was no exception. See you at Agile 2012 in the great state of Texas!
I recently recorded an audio podcast
about Collaborative Development and Operations (DevOps) and how it relates to Disciplined Agile Delivery (DAD)
. The podcast is 17 minutes long and covers a range of topics including:
- What are the challenges typically faced by Disciplined Agile Development teams as they begin to transition their working solutions into production?
- How best could this gap between Development and Operations be closed so that they worked collaboratively rather than in silos?
- If this DevOps gap was decreased or even closed, what would the measurable value be to Agile projects and their business stakeholders?
On a related note, IBM's Collaborative Development and Operations
landing page has some great resources if you're interested in how to implement.
My new white paper, Disciplined Agile Delivery: An Introduction
, is now available free of charge from IBM.com. The paper overviews the Disciplined Agile Delivery (DAD) process framework, a hybrid comprised of strategies from Scrum, XP, Agile Modeling, and other agile methods which is people first, learning oriented, and enterprise aware. DAD is the basis from which you can scale agile.
- Context counts - The Agile Scaling Model
- People first - People, and the way they interact with each other, are the primary determinant of success for a solution delivery project.
- Learning-oriented - The DAD process framework promotes the ideas that team members should collaborate closely and learn from each other, that the team should invest effort to learn from their experiences and evolve their approach, and that individuals should do so as well.
- Hybrid - DAD adopts and tailors strategies from Scrum, XP, Agile Modeling, UP, Kanban, and many others. It addresses many of the issues Mark Kennaley discusses in SDLC 3.0.
- IT solution focused - DAD teams produce potentially consumable solutions every construction iteration. This extends Scrum's "potentially shippable" strategy to explicitly address usability/consumability plus the fact that we're really delivering full solutions not just software.
- Goal-driven delivery life cycle - The DAD lifecycle is focused on delivery, not just construction. Furthermore it is goals-driven, the DAD process framework suggests various strategies to fulfill those goals but does not prescribe specific practices.
- Risk and value driven - The DAD lifecycle is risk and value driven. It extends Scrum's value-driven lifecycle which produces potentially shippable software each sprint/iteration so that it explicitly includes light-weight milesstones such as ensuring stakeholder consensus as to the scope of the project early in the lifecycle, proving the architecture with working code early in the lifecycle, ensuring sufficient functionality exists before transition, and ensuring production readiness before actual release of the solution.
- Enterprise aware - The DAD process framework promotes the ideas that DAD teams should work closely with their enterprise architecture groups to ensure they leverage and evolve the existing infrastructure, adopt and follow corporate guidelines, and work to the overall organizational vision. DAD teams are self organizing with appropriate governance.
I recently did the voice over for our Rational.Everyware Agility@Scale whiteboard video
, which is a bit less than 4 minutes in length. As I narrate a whiteboard sketch evolves, sometimes using sticky-notes and index cards, to help explain what I'm talking about.
In the video, I describe:
- The history of agile
- Some of the challenges surrounding traditional development
- Some of the basics of agile, such as increased collaboration with stakeholders and on delivery of consumable solutions
- The benefits of agile, including increased quality, time to value, stakeholder satisfaction, and ROI
- Domains where agile is being applied successfully
- What IBM agility@scale is all about
- How some of the scaling factors change the way that you'll work and approach tooling
- Rational Team Concert (RTC), what it is and why you'd be interested in it
- Benefits that customers are seeing with RTC
- How you can download a fully-functional version of RTC for a team of up to 10, with no time limit, free of charge
So, it's basically a cool marketing video for a bunch of free stuff.
I'm happy to announce that a revised version of the Lean Development Governance
white paper which I co-wrote with Per Kroll is now available. This version of the paper reflects our learnings over the past few years helping organizations to improve their governance strategies.
There's a more detailed description of the paper here
There is a distinct rhythm, or cadence, at different levels of the agile process. We call this the agile 3C rhythm, for coordinate, collaborate, and conclude (which is sometimes called stabilize). The agile 3C rhythm occurs at three levels in Disciplined Agile Delivery (DAD):
- Day. A typical day begins with a short coordination meeting, called a Scrum meeting in the Scrum method. After the daily coordination meeting the team collaborates throughout most of the day to perform their work. The day concludes with a working build, hopefully you had several working builds throughout the day, which depending on your situation may require a bit of stabilization work to achieve.
- Iteration. DAD construction iterations begin with an iteration planning session (coordinate) where the team identifies a detailed task list of what needs to be done that iteration. Note that iteration modeling is often part of this effort. Throughout the iteration they collaborate to perform the implementation work. They conclude the iteration by producing a potentially consumable solution, a demo of that solution to key stakeholders, and a retrospective to identify potential improvements in the way that they work.
- Release. The DAD lifecycle calls out three explicit phases - Inception, Construction, and Transition – which map directly to coordinate, collaborate, and conclude respectfully.
The agile 3C rhythm is similar conceptually to Deming’s Plan, Do, Check, Act (PDCA) cycle:
- Coordinate maps to plan
- Collaborate maps to do
- Conclude maps to check and act
There is a fair bit of rhetoric surrounding agile methods, some of which we subscribe to and some of which we don’t. We’d like to briefly examine the rhetoric which we’ve found to be the most misleading for people trying to be effective at adopting agile techniques. The following list is in the format X but Y, where X is the rhetoric and Y is the strategy promoted by the Disciplined Agile Delivery (DAD) process framework. This includes:
- Requirements evolve throughout the lifecycle BUT the scope should still be agreed to at the beginning of the project. There has to be an initial vision for a project, a vision which your stakeholders should help define and then agree to, and to come to that vision you will need to perform some initial requirements envisioning. A list of high level features is part of this initial vision. Yes, the details are very likely to evolve over time but the fundamental goals of your project and scope of your effort needs to be defined early in your project. In a very small minority of situations you may not be able to get the right people together, either physically or virtually, to define the initial vision – this should be seen as a significant project risk.
- Simple designs are best BUT the architecture should be thought out early in the lifecycle. Too many developers interpret the advice to focus on simple designs to mean that they should build everything from scratch. Yet more often than not the simplest design is to take advantage of what is already there, and the best way to do that is to work closely with people who understand your existing technical infrastructure. Investing in a little bit of architectural envisioning early in the lifecycle enables your team to identify existing enterprise assets that you can leverage, to identify your architectural options, and to select what appears to be the best option available to you. The details will still emerge over time, and some decisions will be deferred until a later date when it’s more appropriate to make them, but the bottom line is that disciplined agilists think before they act.
- Teams should be self organizing BUT they are still constrained (and enhanced) by your organizational ecosystem. Intellectual workers, including IT professionals, are most effective when they have a say in what work they do and how they do it. IT professionals can improve their productivity by following common conventions, leveraging and building out a common “dev-ops” infrastructure, building towards a common vision, and by working to common business and technical visions. In short, disciplined agile professionals are "enterprise aware".
- Delivery teams don’t need prescriptive process definitions BUT they do need some high-level guidance to help organize their work. Individual IT professionals are typically highly-skilled and highly-educated people often with years of experience, and teams of such people clearly have a wide range of knowledge. As a result of this knowledge it is incredibly rare for such people to read detailed procedures for how to do their work. However, they often still require some high-level advice to help them to organize their work effectively. Teams can often benefit from techniques and patterns used by other teams and this knowledge sharing should be encouraged.
- IT professionals know what to do BUT they’re still not process experts. A decade ago the strategy was to provide detailed process advice to teams, but recently the pendulum has swung the other way to provide little or no defined process at all. Over the last few years there’s been a trend within the agile community to advise teams to define their own process so that it’s tailored to their own unique situation. While this clearly strokes people’s egos, it’s relatively poor advice for several reasons. First, although every team is in a unique situation there is significant commonality so having at least a high-level process framework from which to start makes sense. Second, although these teams have a wide range of knowledge it might not be complete, nor consistent, nor is it clear what the trade-offs are of combining all the really good techniques that people know about. There is significant benefit in having a flexible process framework such as DAD which shows how everything fits together.
- IT professionals should validate their own work to the best of their ability BUT they likely aren’t testing experts so therefore need help picking up the appropriate skills. The mantra in the agile community is to test often and test early, and better yet to test first. As a result agile teams have adopted a “whole team” approach where the development team does its own testing. This works when there are people on the team with sufficient testing skills and more importantly can transfer those skills to others. Minimally you will need to embed testers into your delivery teams, but you should also consider explicit training and mentoring of everyone on the team in testing and quality skills. You may find my agile testing and quality strategies article to be an interesting read.
- Disciplined agile teams work in an iterative manner BUT still follow a lifecycle which is serial over time. On any given day people on a DAD project team may be performing analysis, testing, design, programming, deployment, or a myriad of other activities and iterating back and forth between them. But, the DAD lifecycle includes three distinct phases which are performed in order. So, DAD is both iterative in the small but serial in the large.
Modificado por ScottAmbler
IBM Rational recently published an update to my Agility@Scale e-book, which can be downloaded free of charge. The e-book is a 21 page, 2.3 meg PDF (sorry about the size, guess the graphics did it) . It overviews the Agile Scaling Model (ASM) (which has since been replaced by the Software Development Context Framework (SDCF) ), Disciplined Agile Delivery (DAD), the scaling factors of agility at scale, and ends with some advice for becoming as agile as you can be. In short it's a light-weight coverage of some of the things I've been writing about in this blog the past couple of years. Could be a good thing to share with the decision makers in your organization if they're considering adoption agile strategies.
When it comes to testing on agile projects it is common practice for agile teams to adopt a "whole team testing
" approach where the team itself does its own testing. To accomplish this agile teams will often embed testers in the development team. Programmers will work closely with the testers, often via non-solo development
strategies such as pair programming, to pick up their valuable testing skills. The testers will in turn pick up new skills from the programmers, and in effect both groups will move away from being just specialists (testers or programmers) to being what's called generalizing specialists
. Whole team testing can be very different from traditional approaches where programmers may do some testing, often unit testing of their own code, and then throw it over the wall to testers and quality assurance (QA) professionals for verification and validation.
The types of testing that the parallel independent test team performs may include:
Pre-production system integration testing. Does the solution work within your overall organizational ecosystem? Importantly, if this is one of several teams currently developing new solutions, does this team's solution work with what will be in production (including the work in progress of other teams) when they go to release? In mid-to-large organizations the only economical way to do this sort of testing is via an independent, centralized team.
. Although it's possible to do usability testing on the development team, the reality is that usability testing is a specialized skill that few people have (although could pick up via non-solo development). Furthermore, particularly for solutions with many potential users, you may want to invest in a usability testing
lab. This is a centralized resource, or an outsourced resource these days, which is shared across many teams.
. Security testing is also a specialized skill, albeit one well supported with sophisticated security testing tools such as the Rational Appscan
suite which can be included in your continuous integration (CI) strategy. Many organizations will centralize their security testing efforts.
Exploratory testing. The fundamental goal of exploratory testing is to discover where the solution breaks, as opposed to confirmatory testing which focuses on showing that the solution conforms to the requirements (this is the type of testing the development team typically focuses on). Exploratory testing is also a skill, a good one which everyone should strive to pick up, but exploratory testers are often few in number in many organizations. So, to leverage their skills effectively you may want to have some of them on the independent test team while they mentor others while doing so.
Non-functional testing. Non-functional requirements have a tendency to fall through the cracks on some development teams. Knowing this the independent test team will often "test to the risk" and focus on non-functional issues.
And much more. The above points are just exemplars, not an exact list. Please follow some of the links above for greater detail.
I'd like to leave you with several important thoughts:
The developers still do the majority of the testing. Just because there's an independent test team it doesn't imply that they are the ones doing all the testing. In fact, nothing could be further from the truth. They should be doing the minority of the testing effort, albeit the more difficult forms of it.
An independent test team will support multiple dev teams. For example, a test team of 5-6 people could support several development teams totalling 70 to 80 people. I typically look for a 15:1 or 20:1 ratio of developers to independent testers, hopefully even higher than that.
- You need to consider better tooling. Although the development team will still be using common agile testing tools such as the xUnit and FIT frameworks the independent test team (ITT) will need more sophisticated tooling. First, the ITT will need to be able to report defects back to the team easily. When the development team is using a Jazz-based tool such as Rational Team Concert (RTC) then this can easily be done using either RTC (the web interface may be sufficient) or another Jazz-enabled product such as Rational Quality Manager (RQM). Second, the ITT will likely need more sophisticated testing tools, such as Rational Appscan for static and dynamic security testing and Rational Performance Tester (RPT) for performance testing (just two of several software quality management tools you should consider).
Independent testing is economical. Although I listed several tools in my previous point (hey, I do work for a vendor after all) an "unfortunate" implication of my advice (unfortunate for IBM at least) is that you can reduce the number of licenses that you require and still get this critical testing done by centralizing their use.
It may be a bit more complicated in regulatory environments. In a strict regulatory environment the independent test team may need to repeat, or at least validate, the testing efforts of the development team. In regulatory environments my fundamental advice is always this -- Have practical people, including yourself, read and interpret the regulations. If you leave it to the bureaucrats you'll get a bureaucratic solution.
This is an important scaling technique. Parallel independent testing, when done in an agile manner, is an important technique which you should consider when scaling agile strategies to meet the uniques needs of the situation that you find yourself in.
Modificado por ScottAmbler
One of the scaling factors called out in the Software Development Context Framework (SDCF) is domain complexity. The general idea is that agile teams will find themselves in different situations where some teams are developing fairly straightforward solutions, such as an informational website, whereas others are addressing very complex domains, such as building an air-traffic control system (ATCS). Clearly the team building an ATCS will work in a more sophisticated manner than the one building an informational website. I don't know whether agile techniques have been applied in the development of an ATCS, although I have to think that agile's greater focus on quality and working collaboratively with stakeholders would be very attractive to ATCS delivery teams, I do know that agile is being applied in other complex environments: The 2009 Agility at Scale Survey found that 18% of respondents indicated that their organizations had success at what they perceived to be very complex problem domains,.
Increased domain complexity may affect your strategy in the following ways:
Reaching initial stakeholder consensus becomes difficult. One of the risk reduction techniques called out in Disciplined Agile Delivery (DAD) is to come to (sufficient) stakeholder consensus at the beginning of the project during the Inception phase (called Sprint 0 in Scrum or Iteration 0 in other agile methods). Stakeholder consensus, or perhaps "near concensus" or "reasonable agreement" are better terms, can be difficult to come to the more complex the problem domain is because the stakeholders may not fully understand the implications of what they're making decisions about and because there is likely a greater range of stakeholders with differing goals and opinions. The implication is that your project initiation efforts may stretch out, increasing the chance that you'll fall back on the old habits of big requirements up front (BRUF) and incur the costs and risks associated with doing so.
Increased prototyping during inception. It is very common for disciplined agile teams to do some light-weight requirements envisioning during inception to identify the scope of what they're doing and to help come to stakeholder consensus. The greater the complexity of the domain, and particularly the less your team understands about the domain, the more likely it is that you'll benefit from doing some user interface (UI) prototyping to explore the requirements. UI prototyping is an important requirements exploration technique regardless of paradigm, and it is something that you should consider doing during both initial requirements envisioning as well as throughout the lifecycle to explore detailed issues on a just in time (JIT) manner.
Holding "all-hands reviews". One strategy for getting feedback from a wide range of people is to hold an "all hands review" where you invite a large group of people who aren't working on a regular basis with your team to review your work to date. This should be done occasionally throughout the project to validate that the input that you're getting from your stakeholder represenatives/product owners truly reflects the needs of the stakeholders which they represent. The 2010 How Agile Are You? Survey found that 42% of "agile teams" reported running such reviews.
Increased requirements exploration. Simple modeling techniques work for simple domains. Complex domains call for more complex strategies for exploring requirements. The implication is that you may want to move to usage scenarios or use cases from the simpler format of user stories to capture critical nuances more effectively. A common misunderstanding about agile is that you have to take a "user story driven approach" to development. This is an effective strategy in many situations, but it isn't a requirement for being agile.
The use of simulation. You may want to take your prototyping efforts one step further and simulate the solution. This can be done via concrete, functional prototypes, via simulation software, via play acting, or other strategies.
Addition of agile business analysts to the team. Analysis is so important to agile teams we do it every day. In situations where the domain is complex, or at least portions of the domain is complex, it can make sense to have someone who specializes in exploring the domain so as to increase the chance that your team gets it right. This is what an agile business analyst can do. There are a few caveats. First, even though the domain is complex you should still keep your agile analysis efforts as light, collaborative, and evolutionary as possible. Second, this isn't a reason to organize your team as a collection of specialists and thereby increase overall risk to your project. The agile analyst may be brought on because their specialized skills are required, but the majority of the people on the team should still strive to be generalizing specialists. This is also true of the agile analyst because their may not be eight hours a day of valuable business analysis work on the team, and you don't want the BA filling in their time with needless busy work.
The important thing is to recognize that the strategies which work well when you're dealing with a simple domain will not work well for a complex domain. Conversely, techniques oriented towards exploring complex domains will often be overkill for simple domains. Process and tooling flexiblity is key to your success.
One of the scaling factors
of the Agile Scaling Model (ASM)
is technical complexity.
The fundamental observation is that the underlying technology of solutions varies and as a result your approach to developing a solution will also need to vary.
It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch on a known technology platform, but not so easy when there are several technologies, the technologies are not well known, or legacy assets are involved.
There are several potential technical complexities which a Disciplined Agile Delivery (DAD) team may face:
- New technology platforms. Your team may choose to work with a technology platform which is either new to the team or sometimes even new to the industry. In the past few years new technology platforms include the Android operating system, Apple’s iPad platform, and various cloud computing (http://www.ibm.com/ibm/cloud/) platforms. Working with these platforms may require you to adopt new development tools and techniques, not to mention the need to train and mentor your staff in their usage. Furthermore, your team may need to allocate time for architectural spikes to explore how to use the new technology and to prove the overall architecture with working code early in the project lifecycle (this is a DAD milestone).
- Multiple technology platforms. IT solutions often run on multiple platforms. For example, a system’s user interface (UI) could run in a browser, access business logic implemented using J2EE on Websphere which in turn invokes web services implemented in COBOL running on a Z-series mainframe, and stores data in an Oracle database, a DB2 database, and in several XML files. Implementing new business functionality, or updating existing functionality, could require changes made on several of these platforms in parallel. The implication is that you’ll need to adopt tools and strategies which enable your team to develop, test, and deploy functionality on all of these platforms. Testing and debugging in particular will become more difficult as the number of technology platforms increases, potentially requiring you to adopt the practice of parallel independent testing. The Agility at Scale survey found that 34% of respondents indicated that their agile teams were working with multiple technology platforms.
- Legacy data. IT solutions should leverage existing, legacy data wherever possible to reduce the number of data sources and thereby increase data quality within your organization. Also, using existing data sources can potentially speed up development, assuming your team has a good relationship with the owners of the legacy data sources (sadly, this often isn’t the case as the Data Management Survey found). Working with legacy data sources may require improved database regression testing, practices, database refactoring practices, and agile approaches to data administration. The Agility at Scale survey found that 42% of respondents indicated that their agile teams were working with legacy data sources (personally, I’m shocked that this figure is so low, and fear that many agile teams are contributing to data quality problems within their organization as a result).
- Legacy systems. There are several potential challenges with legacy systems. First, the code quality may not be the best either because it was never really that good to begin with or because it’s degraded over the years as multiple people worked with it. You know you’ve got a quality problem if you’re either afraid to update the code or if when you do so you have to spend a lot of time debugging and then fixing problems revealed when doing the update. If the legacy system is a true asset for your organization you will want to pay off some of this technical debt by refactoring the code to make it of higher quality. Second, you may not have a full regression test suite in place, making it difficult to find problems when you do update the code let alone when you refactor it. Third, your development tools for your legacy code may be a bit behind the times. For example, I often run across mainframe COBOL developers still working with basic code editors instead of modern IDEs such as Rational Developer for System Z. Some of the strategies to deal effectively with legacy systems are to adopt a modern development toolset if you haven’t already done so (better yet, if possible adopt a common IDE across platforms and thereby reduce overall licensing and support costs) and to adopt agile practices such as static code analysis, dynamic software analysis, and continuous integration (CI). The Agile Project Initiation Survey found that 57% of respondents were integrating their new code with legacy systems and 51% were evolving legacy systems.
- Commercial off-the-shelf (COTS) solutions. COTS solutions, also called package applications, can add in a few complexities for agile teams. The packages rarely come with regression test suites, they often have rules about what you can modify and what you shouldn’t (rules that are ignored at your peril), and they’re often architected with the assumption that they’re the center of the architectural universe (which is a valid assumption if they’re the only major system within your organization). As I describe in my article Agile Package Implementations it is possible to take an agile approach to COTS implementations, although it may require a significant paradigm shift for the people involved. The Agility at Scale survey found that 15% of respondents indicated that their agile teams were working with COTS solutions.
- System/embedded solutions. For the sake of simplicity, if your team is developing a solution with both hardware and software aspects to it then you’re a systems project. Embedded systems are a specialization where the system has a few dedicated functions often with real-time constraints. Bottom line is that systems/embedded projects are typically more challenging than software-only projects – it gets really interesting when laws of physics starts to kick in, such as when you’re building satellites or space probes. I highly suggest Bruce Douglass’s book Real-Time Agility if you are interested in taking an agile approach to systems/embedded solution delivery.
The technical complexity faced by a project team is contextual – Working with four technology platforms is straightforward for someone used to dealing with seven, but difficult for someone used to dealing with just one. Recommended Reading:
Modificado por ScottAmbler
I'm happy to announce that A Practical Guide to Distributed Scrum by Elizabeth Woodward, Steffan Surdek, and Matthew Ganis is now in print. I've been talking this book up in presentations and with customers the past few months and promised that I would let everyone know once it was available. I was one of several people who wrote forewords for the book, Ken Schwaber, Roman Pichler, and Matthew Wang also did so, and I've modified my foreword below to help you to understand a bit better what the book is about.
If you’re thinking about buying this book, you’re probably trying to answer one or more of the following questions: “What will I learn?”, “Should I spend my hard earned money on this book?”, “Will it be worth my valuable time to read it?”, and “Is this a book that I’ll refer to again and again?” To help you answer these questions, I thought I’d list a few user stories which I believe this book clearly fulfills:
As a reader I want:
a book that is well-written and understandable real-world examples that I can relate to
quotes from actual people doing this in the field
to understand the challenges that I’ll face with distributed agile development
As someone new to agile I want to:
learn the fundamentals of Scrum
understand the fundamentals of agile delivery
learn about what actually works in practice
discover how extend Scrum into an agile delivery process
As an experienced agile practitioner I want to learn:
how to scale agile approaches for distributed teams
how to overcome the challenges faced by distributed teams
how to tailor existing agile practices to reflect the realities of distribution
bout “new” agile practices which we might need to adopt
techniques so that distributed team members can communicate effectively
how to extend Scrum with proven techniques from Extreme Programming, Agile Modeling, and other agile methods
how to address architectural issues on a distributed agile team
how agile teams address documentation
how agile teams can interact effectively with non-agile teams
As a Scrum Master I want to learn how to:
lead a distributed agile team
facilitate a distributed “Scrum of Scrums”
facilitate the successful initiation of a distributed agile project
facilitate communication and collaboration between distributed team members
As a Product Owner I want to learn:
how to manage a product backlog on a distributed team
about different categories of stakeholders whom I will need to represent
about techniques to understand and capture the goals of those stakeholders
how to manage requirements with other product owners on other sub-teams
what to do during an end-of-sprint review
how I can streamline things for the delivery team that I’m working with
As an agile skeptic I want to:
see examples of how agile works in practice
hear about the challenges faced by agile teams
hear about where agile strategies don’t work well and what to do about it
I work with organizations around the world helping them to scale agile strategies to meet their real-world needs. Although this book is focused on providing strategies for dealing with geographical distribution, it also covers many of the issues that you’ll run into with large teams, complex problem domains and complex technical domains. An important aspect of scaling agile techniques is to first recognize that’s there’s more to scalability than dealing with large teams, something which this book clearly demonstrates.
At the risk of sounding a bit corny, I’ve eagerly awaited the publication of this book for some time. I’ve known two of the authors, Elizabeth and Matt, for several years and have had the pleasure of working with them and learning from them as a result. Along with hundreds of other IBMers I watched this book get written and provided input where I could. The reason why I’m so excited about it is that I’ve wanted something that I could refer the customers to that I work with and honestly say, “yes, we know that this works because this is what we do in practice”.
IBM is doing some very interesting work when it comes to scaling agile. We haven’t published enough externally, in my opinion, due to a preference for actively sharing our experiences internally. This book collects many of our experiences into a coherent whole and more importantly shares them outside the IBM process ecosystem. Bottom line is that I think that you’ll get a lot out of this book.
In Implementing Lean Software Development
, Mary and Tom
Poppendieck show how the seven principles of lean manufacturing can be applied
to optimize the whole IT value stream. These principles are:
- Eliminate waste. Lean thinking advocates regard any activity
that does not directly add value to the finished product as waste. The three
biggest sources of waste in software development are the addition of unrequired
features, project churn and crossing organizational boundaries (particularly
between stakeholders and development teams). To reduce waste it is critical
that development teams be allowed to self organize and operate in a manner that
reflects the work they’re trying to accomplish. Walker Royce argues in “Improving Software Economics” that the primary benefit of modern iterative/agile
techniques is the reduction of scrap and rework late in the lifecycle.
- Build in quality. Your process should not allow defects to
occur in the first place, but when this isn’t possible you should work in such
a way that you do a bit of work, validate it, fix any issues that you find, and
then iterate. Inspecting after the fact,
and queuing up defects to be fixed at some time in the future, isn’t as
effective. Agile practices which build
quality into your process include test driven development (TDD) and non-solo
development practices such as pair programming and modeling with others.
- Create knowledge. Planning is useful, but learning is essential.
You want to promote strategies, such as iterative development, that help teams
discover what stakeholders really want and act on that knowledge. It’s also
important for a team to regularly reflect on what they’re doing and then act to
improve their approach.
- Defer commitment. It’s not necessary to start software
development by defining a complete specification, and in fact that appears to
be a questionable strategy at best. You can support the business effectively
through flexible architectures that are change tolerant and by scheduling
irreversible decisions to the last possible moment. Frequently, deferring
commitment requires the ability to closely couple end-to-end business scenarios
to capabilities developed in multiple applications by multiple projects.
- Deliver quickly. It is possible to deliver high-quality
systems quickly. By limiting the work of a team to its capacity, which is
reflected by the team’s velocity (this is the number of “points” of
functionality which a team delivers each iteration), you can establish a
reliable and repeatable flow of work. An effective organization doesn’t demand
teams do more than they are capable of, but instead asks them to self-organize
and determine what they can accomplish. Constraining these teams to delivering potentially
shippable solutions on a regular basis motivates them to stay focused on
continuously adding value.
- Respect people.
The Poppendiecks also observe that sustainable advantage is gained from
engaged, thinking people. The implication is that you need a lean governance
strategy that focuses on motivating and enabling IT teams—not on controlling
- Optimize the whole. If you want to be effective at a solution you
must look at the bigger picture. You need to understand the high-level business
processes that individual projects support—processes that often cross multiple
systems. You need to manage programs of interrelated systems so you can deliver
a complete product to your stakeholders. Measurements should address how well
you’re delivering business value, because that is the sole reason for your IT
Lean thinking is important for scaling agile in several ways:
- Lean provides an explanation for why many of the agile
practices work. For example, Agile
Modeling’s practices of light weight, initial requirements envisioning followed
by iteration modeling and just-in-time (JIT) model storming work because they
reflect deferment of commitment regarding what needs to be built until it’s
actually needed, and the practices help eliminate waste because you’re only modeling
what needs to be built.
Lean offers insight into strategies for improving your
software process. For example, by
understanding the source of waste in IT you can begin to identify it and then
Lean principles provide a philosophical foundation for
scaling agile approaches.
- It provides techniques for identifying waste. Value stream mapping, a technique common within the lean
community whereby you model a process and then identify how much time is spent
on value-added work versus wait time, helps calculate overall time efficiency
of what you’re doing. Value stream maps are
a straightforward way to illuminate your IT processes, providing insight into
where significant problems exist. I’ve
created value stream maps with several customers around the world where we
analyzed their existing processes which some of their more traditional staff
believed worked well only to discover they had efficiency ratings of
20-30%. You can’t fix problems which you
are blind to.