I've been getting a lot of questions lately about applying the acceleration metric
in practice. So, here's some answers to frequently asked questions:
1. How do I monetize acceleration?
This is fairly straightforward to do. For example, assume your acceleration is 0.007 (0.7%), there are five people on the team, your annual burdened cost per person is $150,000, and you have two week iterations. All these numbers are made up, but you know how to calculate acceleration now and IT management had darn well better know the average burdened cost (salary plus overhead) of their staff. So, per iteration the average burdened cost per person must be $150,000/26 = $5,770. Productivity improvement per iteration for this team must be $5,770 * 5 * .007 = $202. If the acceleration stayed constant at 0.7% the overall productivity improvement for the year would be (1.007)^26 (assuming the team works all 52 weeks of the year) which would be 1.198 or 19.8%. This would be a savings of $148,500 (pretty much the equivalent of one new person). Of course a 20% productivity increase over an entire year is a really aggressive improvement, regardless of some of the claims made by the agile snake oil salesman out there, although at 10-15% increase is a reasonable expectation. What I'd really want to do is calculate the acceleration for the year by comparing the velocity from the beginning of the year to the end of the year (in Western cultures I'd want to avoid comparing iterations near to the holidays). So, if the team velocity the first week of February 2008 was 20 points, now the same team's velocity the first week of February 2009 was 23 points, that's an acceleration of (23-20)/20 = 15% over a one year period, for a savings of $112,500.
2. Is acceleration really unitless?
For the sake of comparison it is. The "units" are % change in points per iteration, or % change in points per time period depending on the way that you want to look at it. Because it's a percentage I can easily monetize it, as you see above, and use it as a basis of comparison.
3. How do I convince teams to share their data?
This can be difficult. Because acceleration is easy to calculate for agile teams, and because it's easy to use to compare teams (my team has .7% acceleration whereas other teams down the hall from mine have accelerations of .3% and -.2% of teams), people are concerned that this metric will be used against them. OK, to be fair, my team might be OK with this. ;-) Seriously though, this is a valid fear that will only be addressed by an effective governance program
based on enablement, collaboration, and trust instead of the traditional command-and-control approach. Management's track record regarding how they've used measurements in the past, and how they've governed in general, have a great effect on people's willingness to trust them with new metrics such as acceleration. The implication is that you need to build up trust, something that could take years if it's possible at all.
4. Why does this work for agile teams?
Agile teams are self organizing, and an implication of that is that they will be held accountable for their estimates. Because of this accountability, and because velocity is a vital input into their planning and estimation efforts, agile teams are motivated to calculate their velocity accurately and to track it over time. Because they're eager to get their velocity right, and because acceleration is based on velocity, there's an exceptionally good chance that it's accurate.
5. What about function points or similar productivity measures?
Function points can be calculated for projects being developed via an agile approach, or other approaches for that matter, but it's a very expensive endeavor compared to calculating acceleration (which is essentially free) and likely will be seen as a bureaucratic overhead by the development team. My rule of thumb is that if you're not being explicitly paid to count function points (for example the US DoD will often pay contracting companies to create estimates based on function point counts) then I wouldn't bother with them.
6. What about calculating acceleration for iterative project teams?
Iterative project teams, perhaps following Rational Unified Process (RUP)
, can choose to calculate and track their velocity and thereby their acceleration. The key is to allow the team to be self organizing and accountable for their estimates, which in turn motivates them to get their velocity right just like agile teams (RUP can be as agile as you want to make it, don't let anyone tell you differently).
7. What about calculating acceleration for traditional project teams?
In theory this should work, in practice it is incredibly unlikely. Traditional teams don't work in iterations where working software is produced on a regular basis, they're typically not self organizing, and therefore there really isn't any motivate to calculate velocity (even if they do, there is little motivation to get it right). Without knowing the velocity you can't calculate acceleration. If you can't trust the velocity estimate, and I certainly wouldn't trust a traditional team's velocity estimate, then you can't trust your acceleration calculation. So, my fall back position to calculate productivity improvement would be to do something like function point counting (which is expensive and difficult to compare between teams due to different fudge factors used by different FP counters) and then looking at change in FPs delivered over time.
8. How can I apply this across a department?
It is fairly straightforward to roll up the acceleration of project teams into an overall acceleration measure for a portfolio of teams simply by taking a weighted average based on team size. However, this is only applicable to teams that are in a position to report an accurate acceleration (the agile and iterative teams) and of course are willing to do so.
9. What does a negative acceleration tell me?
If the acceleration is negative then productivity on the team is going down, likely an indicator of quality and/or team work problems. However, you don't want to manage by the numbers so you should talk to the team to see what's actually going on.
10. What does a zero acceleration tell me?
This is an indication that the team's productivity is not increasing, and that perhaps they should consider doing retrospectives at the end of each iteration and then acting on the results from those retrospectives. Better yet they can "dial up" their process improvement efforts by adopting something along the lines of IBM Rational Self Check
On Twitter one of the people that I follow recently tweeted in jest "I am waste". He had been tweeting about the problem that people will often pay consultants for their advice yet will not follow that advice once it's been provided (yet will often still keep paying for more advice). Perhaps in this situation his efforts were a waste, or perhaps the real issue was that the customer had a long learning process and hadn't yet come to the point where they were willing to act on the advice, we may never know. But I have to think that there are other situations where this person isn't a waste, regardless of his claims.
This got me thinking that something is a waste in one context yet in another context may be quite valuable. Or, as the old saying goes, one man's trash is another man's treasure.
For example, consider the following simple value stream:
[Activity A: 10 min] [Wait time: 20 min] [Activity B: 10 min]
Without considering the context, the wait time of 20 min represents 50% waste in the overall process that we should try to eliminate.
What if that wait time provides people with a much needed rest? With time to contemplate? With time to destress? Eliminating that wait time, or even reducing it, could result a degradation of performance. In this case, one person's waste (the wait time) is another person's treasure (rest time). The implication is that we need to work closely with the people intimately involved in a process if we're to help them to improve it.
My new white paper, Disciplined Agile Delivery: An Introduction
, is now available free of charge from IBM.com. The paper overviews the Disciplined Agile Delivery (DAD) process framework, a hybrid comprised of strategies from Scrum, XP, Agile Modeling, and other agile methods which is people first, learning oriented, and enterprise aware. DAD is the basis from which you can scale agile.
- Context counts - The Agile Scaling Model
- People first - People, and the way they interact with each other, are the primary determinant of success for a solution delivery project.
- Learning-oriented - The DAD process framework promotes the ideas that team members should collaborate closely and learn from each other, that the team should invest effort to learn from their experiences and evolve their approach, and that individuals should do so as well.
- Hybrid - DAD adopts and tailors strategies from Scrum, XP, Agile Modeling, UP, Kanban, and many others. It addresses many of the issues Mark Kennaley discusses in SDLC 3.0.
- IT solution focused - DAD teams produce potentially consumable solutions every construction iteration. This extends Scrum's "potentially shippable" strategy to explicitly address usability/consumability plus the fact that we're really delivering full solutions not just software.
- Goal-driven delivery life cycle - The DAD lifecycle is focused on delivery, not just construction. Furthermore it is goals-driven, the DAD process framework suggests various strategies to fulfill those goals but does not prescribe specific practices.
- Risk and value driven - The DAD lifecycle is risk and value driven. It extends Scrum's value-driven lifecycle which produces potentially shippable software each sprint/iteration so that it explicitly includes light-weight milesstones such as ensuring stakeholder consensus as to the scope of the project early in the lifecycle, proving the architecture with working code early in the lifecycle, ensuring sufficient functionality exists before transition, and ensuring production readiness before actual release of the solution.
- Enterprise aware - The DAD process framework promotes the ideas that DAD teams should work closely with their enterprise architecture groups to ensure they leverage and evolve the existing infrastructure, adopt and follow corporate guidelines, and work to the overall organizational vision. DAD teams are self organizing with appropriate governance.
The basic idea behind DevOps
is that your development strategy and operations strategy should reflect one another, that you should strive to optimize the whole IT process. This implies that development teams should work closely with your operations staff to deliver new releases smoothly into production and that your operations staff should work closely with development teams to streamline critical production issues.
DevOps has its source in agile software development, and it is an explicit aspect of the Disciplined Agile Delivery (DAD)
process framework. As a result there is a collection of agile development strategies which enable effective DevOps throughout the agile delivery lifecycle. These strategies include:
- Initial requirements envisioning. Disciplined agile teams invest time at the beginning of the project to identify the high-level scope in a light-weight, collaborative manner. This includes common operations requirements such as the need to backup and restore data sources, to instrument the solution so that it can be monitored in real time by operations staff, or to architect the solution in a modular manner to enable easier deployment.
- Initial architecture envisioning. Disciplined agile teams will also identify a viable architectural strategy which reflects the requirements of their stakeholders and your organization’s overall architectural strategy (hence the need to work closely with your enterprise architects and operations staff). One goal is to ensure that the team is building (or buying) a solution which will work well with the existing operational infrastructure and to begin negotiating any infrastructural changes (such as deploying new technologies) early in the project. Another goal is to ensure that operations-oriented requirements are addressed by the architecture from the very start.
- Initial release planning. As part of release planning the disciplined agile team works closely with their operations group to identify potential release windows to aim for, any release blackout periods to avoid, and the need for operations-oriented milestone reviews later in the lifecycle (if appropriate).
- Active stakeholder participation. Disciplined agile teams work closely with their stakeholders, including both operations and support staff, all the way through the lifecycle to ensure that their evolving needs are understood.
- Continuous integration (CI). This is a common technical agile practice where the solution is built/compiled, regression tested, and maybe even run through code analysis tools. CI promotes greater quality which in turn enables easier releases into production.
- Parallel independent testing. For enterprise-class development or at scale, particularly when the domain or technology is very complex or in regulatory environments, disciplined agile team will find they need to support their whole team testing efforts with an independent test team running in parallel to the development team. These testing issues often include validation of non-functional requirements – such as security, performance, and availability concerns – and around production system integration. All of these issues are of clear importance for operations departments.
- Continuous deployment. With this practice you automate the promotion of your working solution between environments. By automating as much of the deployment effort as possible, and by running it often, the development team increases the chance of a successful deployment and thereby reduces the risk to the operations environment. Note that deployment into production is generally not automatic, as this is an important decision to be made by your operations/release manager(s).
- Continuous documentation. With this practice supporting documentation, including operations and support documentation, is evolved throughout the lifecycle in concert with the development of new functionality.
- Production release planning. This is the subset of your release planning efforts which focuses on the activities required to deploy into production.
- Production readiness reviews. There should be at least one review, performed by the person(s) responsible for your operations environment, before the solution is deployed into production. The more critical the system, the more product readiness reviews may be required.
- End-of-lifecycle testing. Minimally you will need to run your full automated regression test suite against your baselined code once construction ends. There may also be manual acceptance reviews or testing to be performed, and any appropriate fixing and retesting required to ensure that the solution is truly ready for production.
There’s more to it though than simply adopting some good practices. Your process must also embrace several supporting philosophies. The Disciplined Agile Delivery (DAD)
process framework not only adopts the practices listed above, and more, but it also promotes several philosophies which enable DevOps:
- Delivery teams should be enterprise aware, that they should work with people such as operations staff and enterprise architects to understand and work towards a common operational infrastructure for your organization.
- Operations and support people should be recognized as key stakeholders of the solution being worked on.
- The delivery team should focus on solutions over software. Software is clearly important, but we will often provide new or upgraded hardware, supporting documentation (including operations and support procedures), change the business/operational processes that stakeholders follow, and even help change the organizational structure in which our stakeholders work.
- Your process should include an explicit governance strategy. Effective governance strategies motivate and enable development teams to leverage and enhance the existing infrastructure, follow existing organizational conventions, and work closely with enterprise teams – all of which help to streamline operations and support of the delivered solutions.
For more detail about this topic, I think that you will find the article I wrote for the December 2011 issue of Cutter IT Journal entitled “Disciplined Agile Delivery and Collaborative DevOps
” to be of value.
Modified by ScottAmbler
This blog posting has been replaced by the more detailed article: Full Agile Delivery Lifecycles.
Thank you for your patience.
At IBM Rational we define disciplined agile delivery as:
Disciplined agile delivery is an evolutionary (iterative and incremental) approach which regularly produces high quality solutions in a cost effective and timely manner via a risk and value driven life cycle. It is performed in a highly collaborative, disciplined, and self-organizing manner within an appropriate governance framework, with active stakeholder participation to ensure that the team understands and addresses the changing needs of its stakeholders to maximize business value provided. Disciplined agile delivery teams provide repeatable results by adopting just the right amount of ceremony for the situation which they face.
Let’s explore the key points in this definition:
- Full delivery life cycle. Disciplined agile delivery processes have life cycles which are serial in the large and iterative in the small. Minimally they have a release rhythm which recognizes the need for start up/inception activities, construction activities, and deployment/transition activities. Better yet, they include explicit phases as well. It is very important to note that these are not the traditional waterfall phases – requirements, analysis, design, and so on – but instead different “seasons” of a project. The point is that we need to look beyond agile software development and consider the full complexities of solution delivery. Adopting a full delivery life cycle, not just a construction life cycle, is arguably the “zeroth” agile scaling factor.
- Evolutionary. Agile strategies are both iterative and incremental in nature. Iterative means that you are working in a non-serial manner, on any given day you may do some requirements analysis, some testing, some programming, some design, some more testing, and so on. Incremental means that you add new functionality and working code to the most recent build, until such time as the stakeholder determines there is enough value to release the product.
- Regularly produces high quality solutions. Agilists are said to be quality focused. They prefer to test often and early, and the more disciplined ones even take a test-first approach where they will write a single test and the just enough production code to fulfill that test (then they iterate). Many agile developers have adopted the practice of refactoring, which is a technique where you make simple changes to your code or schema which improves its quality without changing its semantics. Adoption of these sorts of quality techniques seems to work – it appears that agile teams are more likely to deliver high quality systems than traditional teams (according to the DDJ 2008 Project Success survey). Within IBM we take it one step further and focus on consumability, which encompasses quality and other features such as ease of deployment and system performance. Furthermore, although some agile methods promote the concept of producing “potentially shippable software” on a regular basis, disciplined agile delivery teams produce solutions: a portion of which may be software, a portion of which may be hardware, and a portion of which will be the manner in which the system is used.
- Cost effective and timely manner. Agile teams prefer to implement functionality in priority order [http://www.agilemodeling.com/essays/prioritizedRequirements.htm], with the priority being defined by their stakeholders (or a representative thereof). Working in priority order enables agile teams to maximize the return on investment (ROI) because they are working on the high-value functionality as defined by their stakeholders, thereby increasing cost effectiveness. Agile teams also prefer to produce potentially shippable solutions each iteration (an iteration is a time-box, typically 2-4 weeks in length), enabling their stakeholders to determine when they wish to have a release delivered to them and thereby improving timeliness. Short iterations reduce the feedback cycle, improving the chance that agile teams will discover problems early (they “fail fast”) and thereby enable them to address the problems when they’re still reasonably inexpensive to do so. The DDJ 2008 Project Success survey found that agile teams are in fact more likely to deliver good ROI than traditional teams and more likely to deliver in a timely manner.
- Value driven life cycle. One result of building a potentially shippable solution every iteration is that agile teams produce concrete value in a consistent and visible manner throughout the life cycle.
- Risk and value driven life cycle. Core agile processes are very clear about the need to produce visible value in the form of working software on a regular basis throughout the life cycle. Disciplined agile delivery processes take it one step further and actively mitigate risk early in the life cycle – during project start up you should come to stakeholder concurrence regarding the project’s scope, thereby reducing significant business risk, and prove the architecture by building a working skeleton of your system, thereby significantly reducing technical risk. They also help with transition to agile, allowing traditional funding models to use these milestones before moving to the finer grained iteration based funding that agile allows.
- Highly collaborative. People build systems, and the primary determinant of success on a development project is the individuals and the way that they work together. Agile teams strive to work closely together and effectively as possible. This is a characteristic that applies to both engineers on the team, as well as their leadership.
- Disciplined. Agile software development requires greater discipline on the part of practitioners that what is typically required by traditional approaches.
- Self organizing. This means that the people who do the work also plan and estimate the work.
- Self-organization within an appropriate governance framework. Self-organization leads to more realistic plans and estimates which are more acceptable to the people implementing them. At the same time these self-organizing teams must work within an appropriate governance framework which reflects the needs of their overall organizational environment. An “appropriate governance framework” explicitly enables disciplined agile delivery teams to effectively leverage a common infrastructure, to follow organizational conventions, and to work towards organizational goals. The point is that project teams, regardless of the delivery paradigm they are following, need to work within the governance framework of their organization. More importantly, effective governance programs should make it desirable to do so. Our experience is that traditional, command-and-control approaches to governance where senior management explicitly tells teams what to do and how to do it don’t work very well with agile delivery teams. We’ve also found that lean development governance, an approach which is based on collaboration and enablement, is far more effective in practice. Good governance increases the chance that agile delivery teams will build systems which fit into your overall organizational environment, instead of yet another stand-alone system which increases your overall maintenance burden and data quality problems.
- Active stakeholder participation. Agile teams work closely with their stakeholders, who include end users, managers of end users, the people paying for the project, enterprise architects, support staff, operations stuff, and many more. Within IBM we distinguish between four categories of stakeholder: principles/sponsors, partners (business partners and others), end users, and insiders These stakeholders, or their representatives (product owners in Scrum, or on-site customers in Extreme Programming, or a resident stakeholder in scaling situations), are expected to provide information and make decisions in a timely manner.
- Changing needs of stakeholders. As a project progresses your stakeholders will gain a better understanding of what they want, particularly if you’re showing them working software on a regular basis, and will change their “requirements” as a result. Changes in the business environment, or changes in organization priority, will also motivate changes to the requirements. There is a clear need for agile requirements change management [http://www.agilemodeling.com/essays/changeManagement.htm] on modern IT projects.
- Repeatable results. Stakeholders are rarely interested in how you delivered a solution but instead in what you delivered. In particular, they are often interested in having a solution which meets their actual needs, in spending their money wisely, in a high-quality solution, and in something which is delivered in a timely manner. In other words, they’re interested in repeatable results, not repeatable processes.
- Right amount of ceremony for the situation. Agile approaches minimize ceremony in favor of delivering concrete value in the form of working software, but that doesn’t mean they do away with ceremony completely. Agile teams will still hold reviews, when it makes sense to do so. DDJ’s 2008 Modeling and Documentation Survey found that agile teams will still produce deliverable documentation, such as operations manuals and user manuals, and furthermore are just as likely to do so as traditional teams. The DDJ September 2009 State of the IT Union survey found that the quality of the documentation delivered by agile teams was just as good as that delivered by traditional teams, although iterative teams (e.g. RUP teams) did better than both agile and traditional.
When adopting agile software development
techniques across a large number of teams within your organization it is important to provide a definition for what agile software development is, in addition to criteria
for what it means to be agile. Many people will point to the four values of the Agile Manifesto
and claim that's a good definition. Well... it might be a good definition for the visionaries and early adopters among us, but for people on the right-hand side of the technology adoption chasm (the early majority, late majority and the laggards) this isn't enough. Don't get me wrong, I'm a firm believer in the agile values but I like to cast them as philosophies instead of as a definition.
At IBM Software Group, the definition of disciplined agile software delivery which we have been sharing with our customers is:Disciplined agile software delivery is an evolutionary (iterative and incremental) approach to delivery which regularly produces high quality software in a cost effective and timely manner. It is performed in a highly collaborative and self-organizing manner, with active stakeholder participation to ensure that the team understand and addresses the changing needs of its stakeholders. Disciplined agile delivery teams provide repeatable results by adopting just the right amount of ceremony for the situation which they face.
I think that this is a pretty good definition, although I have no doubt that we'll evolve it over time.
I also suspect that the agile community will never settle on a common definition for what agile is and more than likely are smart enough not to even try. ;-)Further reading:
Although it might not be obvious, and important success factor in adopting agile techniques
is to be able to determine whether a team is agile or not. The challenge that many organizations face is that many teams will claim to be agile, yet management, who often has little or no experience with agile approaches, cannot tell which claims are true and which are over zealous (I'm being polite). The following are the criteria that I suggest you look for in a disciplined agile team:1. Produce working software on a regular basis
. This is one of the 12 principles behind the Agile Manifesto
, and in my experience is a critical differentiator between the teams that are agile and those that are merely claiming it. Ideally the team should produce potentially shippable software each iteration. That doesn't mean that they'll deploy the system into production, or the marketplace, each iteration but they could if required to do so. Typically the team will deploy into a pre-production testing environment or a demo enviroment at the end of each iteration (or more often for that matter).2. Do continuous regression testing, and better yet take a Test-Driven Development (TDD) approach
. Agile developers test their work to the best of their ability, minimally doing developer regression testing via a continuous integration (CI) strategy
and better yet do developer-level TDD
. This approach enables development teams to find defects early, thereby reducing the average cost of addressing the defects, it also helps them to deliver higher quality code and to move forward safely when adding or changing functionality.3. Work closely with their stakeholders, ideally on a daily basis
. A common practice of agile teams is to have an on-site customer or product owner who prioritizes requirements and provides information on a timely manner to the team. Disciplined agile teams take it one step further and follow the practice active stakeholder participation
where the stakeholders get actively involved with modeling and sometimes even development.4. Are self-organizing within a governance framework
. Agile teams are self-organizing, which means that the people doing the work determines how the work will be done, they're not told by a manager who may not even be directly involved with the work how it will be done. In other words the team does its own planning, including scheduling and estimation. Disciplined agile teams are self governing within an effective governance framework
.5. Regularly reflect on how they work together and then act to improve on their findings
. Most agile teams hold a short meeting at the end of each iteration to reflect upon how well things are working and how they could potentially improve the way that they are working together. Sometimes this is done in a more formalized manner in the form of a retrospective
, but often it's done informally. The team then acts on one or more of their suggested improvements the next iteration. Disciplined agile teams take this one step further and measure their software process improvement (SPI) progress over time: the act of taking these measures, perhaps via a product such as Rational Self Check
, helps to keep the team on track in their SPI efforts.
I have yet to discover an ad-hoc development team which met all five criteria, and most of them rarely meet two or three.Further reading:
For some reason, it seems as if everyone's grandfather at one point in time recommended to use the right tools for the job. That's practical wisdom from my point of view, one that is certainly an issue for agile development.
One of the primary messages, I hope, of the Agile Scaling Model (ASM)
is that context counts. Although the focus of the ASM is on describing a contextual framework for tailoring your process to meet the needs of the situation that you find yourself in, it's also applicable to your tooling selection. For example, the tool choices of a co-located team will be much different than that of a geographically distributed team. A co-located team will likely use a whiteboard
or paper for their agile modeling
efforts, whereas distributed team members may need to capture their diagrams using a more sophisticated tool such as Rational Requirements Composer (RRC)
so that their work can be shared electronically. Having said that, RRC would be overkill for a co-located team (unless they had regulatory compliance issues). Different teams, different situations, therefore different tooling choices.
One of the concerns that I run into from customers is that some of our legacy products don't support agile very well. Once again, it's a matter of context because many of our legacy products reflect the realities faced by more traditional teams. The challenge occurs when you try to take a legacy product which is well suited for traditional development, such as Rational ClearCase
, and try to apply it on agile projects. Although ClearCase makes sense in certain scaling situations, particularly very large teams that are geographically distributed, you'd be better advised to use something like Rational Team Concert (RTC)
for configuration management on most agile teams (note that RTC does far more than just SCM).
So, if you're taking an agile approach you should consider Rational tools such as RTC, RRC, Rational BuildForge
, Rational AppScan
, and others which support agile
development. Granted, some you would only use at scale -- for example Buildforge is a good option in really complex environments, but if you don't face that complexity then you'll likely find that RTC's build engine is sufficient. Similarly, if you're taking a traditional approach to development then you'll likely consider products such as ClearCase, Appscan, RTC, and Rational Software Architect (RSA)
instead. Different situations, different tooling choices.
What's even more confusing is that some products support a range of process paradigms. For example, RTC supports agile, lean, iterative, and traditional approaches to development. The same can be said of Appscan and several other products. Notice how I listed RTC and Appscan for both agile and traditional development above.
So, if anyone tells you that Rational tools don't support agile development don't believe them. Ask them which tools that they're talking about, and ask them if they're aware of the Rational products that do support agile development. Context counts.
I recently recorded an audio podcast
about Collaborative Development and Operations (DevOps) and how it relates to Disciplined Agile Delivery (DAD)
. The podcast is 17 minutes long and covers a range of topics including:
- What are the challenges typically faced by Disciplined Agile Development teams as they begin to transition their working solutions into production?
- How best could this gap between Development and Operations be closed so that they worked collaboratively rather than in silos?
- If this DevOps gap was decreased or even closed, what would the measurable value be to Agile projects and their business stakeholders?
On a related note, IBM's Collaborative Development and Operations
landing page has some great resources if you're interested in how to implement.
Timo Tenhunen has recently published his master's thesis, Challenges in Scaling Agile Software Development
, and has been kind enough to make it available online. I suspect you'll find it to be an interesting read.
Again and again I've seen IT organizations suffering from what I call the "Bureaucracy is Discipline" antipattern. For example, filling out forms and reviewing documents are both bureaucratic activities, neither of which require significant skill nor discipline to accomplish. However, agile practices such as developing potentially shippable software every iteration is easy to say but requires great discipline to accomplish. Respecting the decisions of your stakeholders, particularly those pertaining to requirements prioritization, is easy to talk about but proves to require great discipline in practice (particularly when you don't agree with a decision). It's easy to talk about taking a test-driven approach to development
, but in practice it requires significant skill and discipline to actually do.
A "process smell" which indicates that your organization is suffering from this antipattern is a focus on following repeatable processes instead of focusing on repeatable results. An example of repeatable processes is following the same route to work every day regardless of driving conditions. An example of repeatable results is getting to work on time every day, but being willing to change your route as required, bicycling into work instead of driving, taking public transit, and so on. Nobody really cares how you get to work each day (the process), what they really care about is that you got to work on time (the result). Sadly, we've been told for decades now that repeatable processes are critical to our success in IT, yet when you step back and think about that's really a reflection of a bureaucratic approach. On the other hand, a focus on repeatable results is a reflection of a more disciplined approach. Interestingly, the DDJ 2008 Process Framework survey
found that given the choice that people would much rather have repeatable results over repeatable processes
when it comes to IT.
Mistaking bureaucracy for discipline, or rigour if you prefer that term, is a reflection of the cultural damage that has occurred over the years in IT organizations as the result of traditional philosophies and techniques. Unfortunately, this mistaken belief is a significant inhibitor to software process improvement (SPI) efforts, in particular agile adoption efforts
, which must be addressed if you're to be successful. Overcoming this challenge will require a significant cultural shift in some organizations, and many people (particularly the bureaucrats) will find this uncomfortable.Further reading:
I'd like to leave you with this parting thought: Bureaucracy is bureaucracy and discipline is discipline, please don't confuse the two
The Disciplined Agile Consortium
recently launched a certification programme for practitioners of Disciplined Agile Delivery (DAD)
. There are three practitioner certifications
- Disciplined Agile Yellow Belt. This beginner certification indicates to colleagues and employers that you are eager to learn Disciplined Agile Delivery (DAD) strategies that enable you to increase your skills and abilities as a software professional.
- Disciplined Agile Green Belt. This intermediate certification indicates that you are experienced at DAD and are on your way to becoming a generalizing specialist. You have the potential to be a “junior coach” under the guidance of a senior coach (someone who is likely a Disciplined Agile Black Belt).
- Disciplined Agile Black Belt. This expert certification indicates that you are a trusted expert with significant proficiency at DAD. You can coach other people in disciplined agile strategies and advise organizations in the adoption and tailoring of the DAD framework.
Differentiate yourself in the marketplace. Certification in Disciplined Agile Delivery (DAD) means something to clients and employers because it needs to be earned. Certification in DAD tells the marketplace you understand how to deliver an agile solution from end-to-end with experience in enterprise-class development.
As an aside, the Disciplined Agile Consortium is proud to have IBM Rational's Richard Knaster and Carson Holmes the president of the Global Rational User Group (GRUG) on our board of advisors.
Modified by ScottAmbler
On April 25, 2013 I gave a webcast for the Global Rational User Community entitled Disciplined Agile Delivery: Going beyond Scrum . During the webcast a large number of questions were asked but unfortunately I couldn’t get to all of them. So I’ve taken the opportunity to write up the answers in this blog posting.
Fequently asked questions. Many of the questions are addressed in the DAD FAQ.
DAD elevator pitch - I will be starting work in a couple of weeks for a company that has just started its Agile journey this year by implementing Scrum. What would Scott put in an elevator chat as to why they should be moving towards DAD. The Disciplined Agile Delivery (DAD) decision process framework is a people-first, learning-oriented hybrid agile approach to IT solution delivery. It has a risk-value delivery lifecycle, is goal-driven, is enterprise aware, and is scalable. There are clearly some interesting aspects to the DAD framework. DAD is a hybrid approach which extends Scrum with proven strategies from Agile Modeling (AM), Extreme Programming (XP), Unified Process (UP), Kanban, Lean Software Development, Outside In Development (OID) and several other methods. DAD is a non-proprietary, freely available framework. DAD extends the construction-focused lifecycle of Scrum to address the full, end-to-end delivery lifecycle from project initiation all the way to delivering the solution to its end users. It also supports lean and continuous delivery versions of the lifecycle: unlike other agile methods, DAD doesn’t prescribe a single lifecycle because it recognizes that one process size does not fit all. DAD includes advice about the technical practices such as those from Extreme Programming (XP) as well as the modeling, documentation, and governance strategies missing from both Scrum and XP. But, instead of the prescriptive approach seen in other agile methods, including Scrum, the DAD framework takes a goals-driven approach. In doing so DAD provides contextual advice regarding viable alternatives and their trade-offs, enabling you to tailor DAD to effectively address the situation in which you find yourself. By describing what works, what doesn’t work, and more importantly why, DAD helps you to increase your chance of adopting strategies that will work for you. The article Introduction to Disciplined Agile Delivery provides a more detailed description.
The book: Could you please repeat the name of the book that Scott is talking about? The book is Disciplined Agile Delivery: A Practitioner’s Guide to Agile Software Delivery in the Enterprise published by IBM Press, June 2012. The Disciplined Agile Delivery (DAD) website and the Disciplined Agile Consortium website are also good DAD resources.
The Surveys: Where is the data published about geographic distribution and effectiveness? All of my survey data, the original questions as asked, and my analysis can be downloaded free of charge from my IT Surveys page. If you ever see a request from me to fill out a survey, please take a few minutes and do so. I think you'll agree that my surveys page is in fact a very useful resource, so please contribute when you can.
Project success criteria: Where would a goal of defining success criteria fall? In the DAD book we describe how the success criteria for the project should be initially identified during Inception. Success criteria, like other things, could evolve throughout the project. You might find the IT Process Success Surveys to be of interest as several of them explored what success criteria projects actually have. Interestingly, its rarely “on time, on budget, to specification”.
Transitioning to DAD: How would you typically phase a DAD implementation, let's say in a project pilot where they haven't been exposed yet to Agile? Same question, any variance if the development team has already started Scrum? This is a fairly complex question to answer. The short story is that you need to invest some time to understand what your strengths and weaknesses are so that you can identify what you need to focus on. You will then likely need to pilot strategies/techniques which are new to your organization before rolling them out widely. You may also need to invest in training and coaching/mentoring depending on your needs. My company, Scott Ambler + Associates, offers these sorts of services and more for organizations interesting in adopting disciplined agile strategies.
Skills: I am aware that ideally developer should also be able to test but in reality theses are usually separate roles. Is it in line with your beliefs\suggestions? Many organizations that are new to agile still have roles that reflect their existing strategy. Non-agile approaches often have people in specific roles such as programmer, tester, designer, and so on. In DAD we promote a different set of agile roles that reflect agile thinking. The implication is that you’re going to have to help individuals transition over to the new way of thinking, something we cover in Chapter 4 of the DAD book. You might also find Mark Lines' blog, No role in DAD for an Analyst? to provide some insights into issues surrounding the transition from traditional to agile roles.
Teaming: What happens with the Product Owner and the Architecture Owner don’t Agree? See my blog What Happens When People Don’t Agree
Skillsets: Different people of the team have different skills, experience, and time horizons. We can't all be generalists, can we? There are several agile roles in DAD, each of which have different rights, responsibilities, and skillsets. So we’re not promoting the idea that everyone have the same skillset. However, we do promote the philosophy that people should strive to be T-skilled generalizing specialists so as to improve their productivity.
Teaming: What are your thoughts on team cohesion? Teams will gel over time. Being co-located helps. Having people who are dedicated 100% to the team helps. Building a team of people who want to be there helps. Self organization helps.
Tool support: Is there an RMC plug-in for DAD + Is there any software behind DAD... or some software that supports it... such as Jazz (RTC) for Agile/Scrum? Yes, IBM Rational does in fact have an RMC plug in for DAD. There is also a template for Microsoft TFS from RDA Corp, Software Development Expert’s Practices Advisor supports DAD comprehensively, and I’m currently working with MethodPark to do so too. Stay tuned to the Disciplined Agile Delivery website for information about tool support.
Governance: Regarding enterprise governance and enterprise IT, how do you start taking a culture that imposes common-process, common-tools, central (often outsourced) IT services, and heavyweight stage/gate across all organizations, and get that evolving toward a (still enterprise aware) lean/agile approach? This is a hard one. I’m often called into organizations to help with this very issue. The challenge is that you need to have a deep understanding of IT governance techniques as well as how to govern agile teams. Governance is something we discussed in detail in the DAD book as well as on the DAD site, see Adopting Agile Governance Requires Discipline.
Executable specifications: TDD was mentioned, can you comment on Behavior Driven Development (BDD) and any impact on this lifecycle? BDD is a slight nuance to acceptance test-driven development (ATDD). BDD/ATDD and TDD are both potential practices that you might choose to follow on a DAD team. I’ve written a fair bit about agile testing and quality strategies and about TDD in detail.
Architecture: When does the first version of architecture gets established and what would require to establish it? You typically start thinking about architecture early in a DAD project during Inception following a practice called architecture envisioning. I’ve also written a fair bit about agile architecture techniques and the potential misconceptions about agile architecture that you may find interesting.
Travel plans: Will you be coming to South Africa at some point? The good news is that Mark Lines, my co-author, will be in South Africa the week of May 20 in Joburg and the following week in Capetown. Contact us for details. I hope to be visiting SA later this year but exact dates haven’t been set yet. So, please stay tuned on Twitter at @scottwambler for further announcements.
Other travel plans: If you'd like me to speak at a local event, including corporate conferences or training events, please contact me.
I recently did the voice over for our Rational.Everyware Agility@Scale whiteboard video
, which is a bit less than 4 minutes in length. As I narrate a whiteboard sketch evolves, sometimes using sticky-notes and index cards, to help explain what I'm talking about.
In the video, I describe:
- The history of agile
- Some of the challenges surrounding traditional development
- Some of the basics of agile, such as increased collaboration with stakeholders and on delivery of consumable solutions
- The benefits of agile, including increased quality, time to value, stakeholder satisfaction, and ROI
- Domains where agile is being applied successfully
- What IBM agility@scale is all about
- How some of the scaling factors change the way that you'll work and approach tooling
- Rational Team Concert (RTC), what it is and why you'd be interested in it
- Benefits that customers are seeing with RTC
- How you can download a fully-functional version of RTC for a team of up to 10, with no time limit, free of charge
So, it's basically a cool marketing video for a bunch of free stuff.
I recently wrote an "e-book" for Internet Evolution overviewing agile software development at scale. The goal of the Agility at Scale: Become as Agile as You Can Be
ebook is to get people thinking outside of the box a bit when it comes to agile development strategies and see that they really are ready for primetime.
I'm happy to announce Rational's Agility at Scale poster which is currently available free of charge from the Rational poster order page
Although I'm obviously biased as I was involved with its creation, the poster includes some really good information about how to scale agile software development practices effectively. It summarizes the scaling factors, such as large teams, distribution, regulatory compliance, application complexity, and so on that you should be concerned with. It also presents a full agile software development lifecycle that goes beyond the construction focused lifecycles of common "agile in the small" processes. It also summarizes the practices of lean development governance, giving you some insight into how to govern your IT environment more effectively.
I think it's a pretty good poster that's worth checking out. It's free, so it's hard to argue with the price. Most importantly, it would look pretty good hanging on your office wall.
And now, a brief message from our sponsor. ;-)
Just wanted to let you know that Agility@Scale will be a major theme at this year's IBM Rational Software Conference
being held in Orlando May 31 through to June 4. I'll be giving two presentations, Agility at Scale: Mitigating the Percieved Risks of Agile Adoption
and Distributed Agile Software Development: Best Practices
, facilitating a panel entitled Experience Reports from the Agile Trenches: What's Really Working, What's Not Working, and Why
, and running a half-day workshop entitled Become as Agile as You Need to Be: Scaling Agile Software Development to Meet Your Real-World Situation
. As usual, it will be a busy conference for me. ;-)
There are of course other sessions and workshops specific to agile topics. Some highlights include:
Of course there's a lot more going on at the conference when it comes to scaling agile software development than just these sessions, but I thought I'd give you a feel for what's going on. Hope to see you at the conference. There's a "March Madness" sale going on right now at the registration page
where if you purchase one pass you get the second for half price.Further reading:
The popular Agile literature can often seam naive when it comes to how Agilists work with project stakeholders:- Extreme Programming (XP) has a practice called On-Site Customer where one or more people work closely with your team to provide information and to make decisions in a timely manner.- Scrum has the role of Product Owner who is the one single person that the development team goes to for decisions about requirements. - Agile Modeling (AM) has the practice of Active Stakeholder Participation which extends On-Site Customer to get the stakeholder(s) actively involved with the modeling effort through the use of inclusive tools and techniques.
These are great strategies for small, co-located teams doing straightforward development, but they quickly fall apart at scale. This occurs for several reasons:1. Stakeholders are a diverse group. Your stakeholders include end users, business management, project funders, enterprise architects, operations staff, support staff, other system development teams, and many others. Different people have different, and often contradictory, requirements and they certainly have different priorities. It's questionable whether a single person, or a handful of persons, can adequately represent this diverse group.2. One person becomes a bottleneck. Even with a small co-located team this is a problem, let alone one that is geographically distributed or one that is very large. There's no way that a single person can be available 24/7 in a responsive manner to support distributed teams.3. It's a difficult role. The Product Owner/Customer (POC) is responsible for representing the business to the development team. They're making important decisions on a regular basis, decisions which they'll be held accountable for.4. One person becomes a serious project risk. Not only is it questionable whether a single person can fairly represent all stakeholders, even if they could what happens if you lose that person? They effectively become a single point of failure for your team.
To scale this role, consider the following strategies:1. Recognize the true scope of the POC role. Not only are they stakeholder proxies they also are a development team representative to the stakeholder community as a whole. As stakeholder proxies they'll make decisions and prioritize the work, they'll run requirements elicitation sessions, they'll negotiate priorities, and they'll put the development team in contact with stakeholders who have expertise in specific aspects of the domain. As team representatives they'll often demo the current version of the system to other stakeholders, communicate the status of the project to people, and respond to various requests for information from the stakeholders.2. Have multiple people in it. A single POC works well for small, co-located teams developing simple software. At scale you'll soon discover that you need multiple people in this role so that they don't become a bottleneck. For distributed teams it's common to see each subteam have one or more POCs who are managed by a primary/chief POC. The primary POC typically works on the coordinating team with the chief architect (I'll talk about this role in a future blog posting) and the program manager (also a topic for a future blog posting).3. Train them in business analysis skills. The person(s) in the POC role need good business analysis skills. If fact, it's common for people who were formerly BAs for traditional teams to step into the POC role, particularly with BAs who originally come from the business side of your organization. This strategy has its advantages and disadvantages. As a BA they've likely got solid business knowledge but their instincts may motivate them to take a documentation-driven approach to providing information to the development team instead of a collaboration-based approach. Be careful.4. Consider the full system development lifecycle. There's far more to the POC role than supporting the development team during Construction iterations. During "Iteration 0", the Inception phase for an Agile RUP project or the warm-up phase for an Eclipse Way project, the POC(s) will often lead the initial requirements envisioning efforts. The product backlog, or better yet your work item list, needs to come from somewhere after all. During the release iteration(s), the Transition phase for RUP or the End-Game phase for Eclipse Way, the POC(s) will focus on communicating the upcoming release to the stakeholder community, will be actively involved with any final user acceptance testing (UAT), and may even be involved with training end users.
In my January 2008 column in Dr Dobb's Journal, posted at http://www.ddj.com/architect/204801134 , I provide detailed advice about how to scale the way that you work with stakeholders on Agile projects by applying the practices of Agile Model Driven Development (AMDD). There's no magic solution, you just need to choose to organize yourself effectively. The good news is that you can easily work with stakeholders at scale.[Read More
It's customary to start a blog by describing the vision for it. Although this vision will undoubtedly evolve over time, it's always good to put a stake in the ground to get things started. Agile software development is clearly taking off and in my opinion is becoming the dominant development paradigm. Furthermore it appears that Agile approaches enjoy a higher success rate, providing better value for your IT investment, than do traditional approaches. Although organizations are succeeding at simpler projects with agile, many are struggling when applying Agile in more complex situations. They're finding that the "Agile rhetoric" doesn't always live up to its promises once you move into these complex situations. My goal with this blog is to share strategies for applying Agile techniques at scale.
When applying Agile strategies at scale you are likely to run into one or more of the following complexity factors:1. Geographical distribution. Is your team, including stakeholders, in different locations? Even being in different cubicles within the same building can erect barriers to communication, let alone being in different cities or even on different continents.2. Regulatory compliance. Regulations, including the Sarbanes-Oxley act, BASEL-II, and FDA statutes, to name a few, can increase the documentation and process burden on your projects. Complying to these regulations while still remaining as agile as possible can be a challenge.3. Entrenched policies, people, and processes. Most agile teams need to work within the scope of a larger organization, and that larger organization isn't always perfectly agile. Hopefully that will change in time, but we still need to get the job done right now. Your existing culture and organization can really hinder your ability to scale agile approaches, then a few "simple" changes can really help your efforts.4. Legacy systems. Although the politically correct term would be "proven assets" the reality is that it can be very difficult to leverage existing code and data sources due to quality problems. The code may not be well written, documented, or even have tests in place, yet that doesn't mean that your agile team should rewrite everything from scratch. Some legacy data sources are questionable at best, or the owners of those data sources difficult to work with, yet that doesn't given an agile team license to create yet another database.5. Organizational distribution. When your teams are made up of people working for different divisions, or if you have people from different companies (such as contractors, partners, or consultants), then your management complexity rises.6. Degree of governance. If you have one or more IT projects then you have an IT governance process in place. How formal it is, how explicit it is, and how effective it is will be up to you. IBM has been doing a lot of work in this topic over the past few years, and just recently Per Kroll and I have done some work around Lean Governance strategies. 7. Team size. Large teams will be organized differently than small teams, and they'll work differently too.8. System complexity. The more complex the system the greater the need for a viable architectural strategy. An interesting feature of the Rational Unified Process (RUP) is that it's Elaboration phase's primary goal is to prove the architecture via the creation of an end-to-end, working skeleton of the system. This risk-reduction technique is clearly a concept which Extreme Programming (XP) and Scrum teams can clearly benefit from.
It is definitely possible to scale Agile software development to meet the real-world complexities faced by modern organizations. Based on my experiences, I believe that over the next few years we'll discover that Agile scales better than traditional approaches. Many people have already discovered this, but as an industry I believe that there isn't yet sufficient evidence to state this as more than opinion. My goal with this blog is to provide advice for scaling Agile so as to increase your chances of success.
So, it looks like I have my work cut out for me. My strategy will be to address common questions which I get when working with customers and with internal IBM development teams. I have the privilege to work with a variety of software development teams worldwide, helping them to become more agile. They're all struggling with the same basic issues although don't recognize it because they're too focused on their own situation. So hopefully I'll be able to spread the word about what's actually working in practice.
I hope that you stay tuned.
- Scott[Read More
In the early days of agile, the applications where agile development was applied were smaller in scope and relatively straightforward. Today, the picture has changed significantly and organizations want to apply agile development to a broader set of projects. Agile hence needs to adapt to deal with the many business, organization, and technical complexities today’s software development organizations are facing. This is what Agility@Scale is all about – explicitly addressing the complexities which disciplined agile delivery teams face in the real world.These agile scaling factors which we've found to be important are:
- Team size. Mainstream agile processes work very well for smaller teams of ten to fifteen people, but what if the team is much larger? What if it’s fifty people? One hundred people? One thousand people? Paper-based, face-to-face strategies start to fall apart as the team size grows.
- Geographical distribution. What happens when the team is distributed, perhaps on floors within the same building, different locations within the same city, or even in different countries? Suddenly effective collaboration becomes more challenging and disconnects are more likely to occur.
- Compliance requirement. What if regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable? These issues bring requirements of their own that may be imposed from outside your organization in addition to the customer-driven product requirements.
- Enterprise discipline. Most organizations want to leverage common infrastructure platforms to lower cost, reduce time to market, and to improve consistency. To accomplish this they need effective enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management disciplines. These disciplines must work in concert with, and better yet enhance, your disciplined agile delivery processes.
- Organizational complexity. Your existing organization structure and culture may reflect traditional values, increasing the complexity of adopting and scaling agile strategies within your organization. To make matters worse different subgroups within your organization may have different visions as to how they should work. Individually the strategies can be quite effective, but as a whole they simply don’t work together effectively.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. This lack of organizational cohesion can greatly increase the risk to your project.
- Technical complexity. Some applications are more complex than others. It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch, but not so easy if you’re working with existing legacy systems and legacy data sources which are less than perfect. It’s straightforward to build a system using a single platform, not so easy if you’re building a system running on several platforms or built using several disparate technologies. Sometimes the nature of the problem that your team is trying to address is very complex in its own right.
Each factor has a range of complexities, and each team will have a different combination and therefore will need a process, team structure, and tooling environment tailored to meet their unique situation. Further reading:
activities are evolutionary (iterative and incremental) and highly collaborative in nature. Initially requirements are explored at a high level via requirements envisioning
at the beginning of the project and the details are explored on a just-in-time (JIT) basis via iteration modeling
and model storming
activities. The way that you perform these agile practices, and the extent to which you do so, depends on the situation in which a project team finds itself. The Agile Scaling Model (ASM)
is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size. To see how this works, let's apply the concepts of the ASM to see how we would scale our agile approach to requirements.
First, let's consider how a small, co-located team would work. The first two categories of the ASM are core agile development and disciplined agile delivery
, the focus of both are small co-located teams in a fairly straightforward situation. In these situations simple techniques such as user stories
written on index cards and sketches on whiteboards
work very well, so the best advice that I can give is to stick with them. Some teams will take a test-driven development
(TDD) approach where they capture their requirements and design in the form of executable specifications
, although this sort of strategy isn't as common as it should be (yet!), likely because of the greater skill and discipline that it requires. Traditionalists often balk at this approach, believing that they need to document the requirements in some manner. But, for a small co-located team working in a collaborative manner, requirements documentation proves to be little more than busy work, often doing nothing more than justifying the existence of a business analyst who hasn't made the jump to agile yet. Don't get me wrong, there are good reasons to write some requirements documentation, and we'll see this in a minute, but you should always question any request for written specifications and try to find more effective ways to address the actual goal(s) motivating the request. Never forget that written documentation
is the least effective communication
option available to you.
Although inclusive tools
such as whiteboards and paper work well for requirements, for development activities you will need electronic tools. You will either put together an environment from point-specific tools or adopt something more sophisticated such as IBM Rational Team Concert (RTC)
which is already fully integrated and instrumented. RTC is a commercial tool, but luckily you can download a 10-license environment free of charge, which is just perfect for a small team. Larger teams, of course, will need to purchase licenses. One of the things that a disciplined agile delivery approach adds to core agile development is it addresses the full delivery life cycle, which is important because it explicitly includes pre-construction activities such as requirements envisioning. The first step in scaling agile techniques is to adopt a full delivery life cycle which covers the full range of activities required to initiate a project, produce the solution, and then release to solution to your end users.
More interesting is the third category of the ASM, Agility@Scale, and how its eight agile scaling factors
affect the way that you tailor your process and tooling strategy. Let's explore how each one could potentially affect your agile requirements strategy:
- Geographical distribution. The majority of agile teams are distributed in some manner -- some people are working in cubicles or private offices, on different floors, in different buildings, or even in different countries -- and when this happens your communication and coordination risks goes up. To counter this risk you will need to perform a bit more requirements envisioning up front to help ensure that everyone is working to the same vision, although this doesn't imply that you need to write detailed requirements speculations which would dramatically increase the risk to your project. Remember, agilists do just barely enough modeling and are prepared to iteratively elicit the details when they need to do so. The more distributed the team is the more likely they will need to adopt software-based requirements modeling tools such as IBM Rational Requirements Composer (RRC) which supports streamlined, agile requirements elicitation throughout the delivery life cycle. Index cards and whiteboards are great, but they're difficult to see if you're outside the room where they're posted. I've written a fair bit about distributed agile development in this blog.
- Team size. Some organizations, including IBM, are successfully applying agile techniques with teams of hundreds of people. A team of one hundred people will naturally work much differently than a team of ten people, or of one thousand people. Large teams are organized into collections of smaller teams, and the requirements for the overall project must be divvied up somehow between those teams. The implications are that as the team size grows you will need to invest a bit more time in initial requirements envisioning, and in initial architecture envisioning for that matter; you will need to use more sophisticated tools; and may need to use more sophisticated modeling techniques such as use cases and functional user interface prototypes. See large agile teams for more advice.
- Compliance requirement. When regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable you are likely going to be required to capture requirements specifications in some manner and to enact traceability between those requirements. However, I highly recommend that you read the actual regulations yourself and don't let bureaucrats interpret them for you (doesn't it always seem that their interpretation always results in an onerous, documentation heavy solution?) because I have yet to run into a regulation which required you to work in an ineffective manner. Managing your requirements as work items in RTC can often more than meet your regulatory requirements for documentation and traceability, although you may want to consider a tool such as IBM Rational RequisitePro for complex regulatory situations.
- Domain complexity. The manner in which you elicit requirements for a data entry application or an informational web site will likely be much simpler than for a bio-chemical process monitoring or air traffic control system. More complex domains will require greater emphasis on exploration and experimentation, including but not limited to prototyping, modeling, and simulation. Although user stories may be effective as a primary requirements artifact in simple domains, in more complex domains you are likely to find that you need to drive your requirements effort with more sophisticated modeling techniques.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. In these cases, particularly where the work is strictly organized between the various organizations (perhaps for security concerns), you may need a more sophisticated approach to managing the requirements. RTC enables you to organize the requirements between teams, and then to automatically track progress in real time via the RTC project dashboard.
- Technical complexity. The technical complexity of a solution can vary widely, from a single platform silo application to a multi-platform application working with legacy systems and data to a full-blown systems engineering effort. Complex technical domains, just like complex business domains, require more complex strategies for requirements elicitation and management. The requirements for your legacy systems are likely to have been captured using tools and techniques appropriate for that platform, for example the requirements for your COBOL application may have been captured using data flow diagrams and data models, whereas the requirements for your Java legacy application where captured using UML diagrams. The subteam working on the COBOL system might be using IBM Rational Application Developer (RAD) and RTC for Z whereas the Java subteam may use Eclipse with RTC. Because systems engineering projects can stretch on for years, particularly when the hardware is being developed in parallel to the software, sophisticated tooling such as IBM Rational DOORS is often used in these situations. For more information about systems engineering, see the IBM Rational Harmony process.
- Organizational complexity. Your approach to requirements elicitation and management will be affected by a host of organizational complexities, including your corporate culture. When the culture is flexible and collaborative you can be very agile in your approach to requirements, but as it becomes more rigid you become more constrained in what is considered acceptable and thus take on greater project risk. For example, many organizations still struggle with their approach to funding projects, often demanding that the project team provides an "accurate" estimate up front to which they will be held to. This in turn motivates risky behavior on the part of the development, including a "big requirements up front (BRUF)" approach where a detailed requirements speculation is developed early in the project. This is just one example of how questionable corporate culture can impact the way in which an agile team works.
- Enterprise discipline. Some organizations have enterprise-level disciplines, such as enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management in place. These disciplines can easily be agile and from what I can tell the more successful efforts appear to lean more towards the agile end of the spectrum rather than the traditional end. Having an enterprise business modeling effort underway will affect your project-level requirements strategy -- you'll be able to leverage existing models, have access to people who understand the domain at an enterprise level, and will likely need to map your project efforts back to your enterprise models. The enterprise modelers will likely be using tools such as IBM Rational System Architect or IBM Websphere Business Modeler.
It is important to note that the way that you tailor the agile practices that you follow, and the tools that you use, will reflect the situation that you find yourself in. In other words, you need to right size your process and the Agile Scaling Model (ASM) provides the context to help you do so. As you saw above, in simpler situations you will use the simpler tools and techniques which are commonly promoted within the core agile development community. But, when things become a bit more complex and one or more of the scaling factors applies you need to modify your approach -- just don't forget that you should strive to be as agile as you can be given the situation that you find yourself in.
There is a fair bit of rhetoric surrounding agile methods, some of which we subscribe to and some of which we don’t. We’d like to briefly examine the rhetoric which we’ve found to be the most misleading for people trying to be effective at adopting agile techniques. The following list is in the format X but Y, where X is the rhetoric and Y is the strategy promoted by the Disciplined Agile Delivery (DAD) process framework. This includes:
- Requirements evolve throughout the lifecycle BUT the scope should still be agreed to at the beginning of the project. There has to be an initial vision for a project, a vision which your stakeholders should help define and then agree to, and to come to that vision you will need to perform some initial requirements envisioning. A list of high level features is part of this initial vision. Yes, the details are very likely to evolve over time but the fundamental goals of your project and scope of your effort needs to be defined early in your project. In a very small minority of situations you may not be able to get the right people together, either physically or virtually, to define the initial vision – this should be seen as a significant project risk.
- Simple designs are best BUT the architecture should be thought out early in the lifecycle. Too many developers interpret the advice to focus on simple designs to mean that they should build everything from scratch. Yet more often than not the simplest design is to take advantage of what is already there, and the best way to do that is to work closely with people who understand your existing technical infrastructure. Investing in a little bit of architectural envisioning early in the lifecycle enables your team to identify existing enterprise assets that you can leverage, to identify your architectural options, and to select what appears to be the best option available to you. The details will still emerge over time, and some decisions will be deferred until a later date when it’s more appropriate to make them, but the bottom line is that disciplined agilists think before they act.
- Teams should be self organizing BUT they are still constrained (and enhanced) by your organizational ecosystem. Intellectual workers, including IT professionals, are most effective when they have a say in what work they do and how they do it. IT professionals can improve their productivity by following common conventions, leveraging and building out a common “dev-ops” infrastructure, building towards a common vision, and by working to common business and technical visions. In short, disciplined agile professionals are "enterprise aware".
- Delivery teams don’t need prescriptive process definitions BUT they do need some high-level guidance to help organize their work. Individual IT professionals are typically highly-skilled and highly-educated people often with years of experience, and teams of such people clearly have a wide range of knowledge. As a result of this knowledge it is incredibly rare for such people to read detailed procedures for how to do their work. However, they often still require some high-level advice to help them to organize their work effectively. Teams can often benefit from techniques and patterns used by other teams and this knowledge sharing should be encouraged.
- IT professionals know what to do BUT they’re still not process experts. A decade ago the strategy was to provide detailed process advice to teams, but recently the pendulum has swung the other way to provide little or no defined process at all. Over the last few years there’s been a trend within the agile community to advise teams to define their own process so that it’s tailored to their own unique situation. While this clearly strokes people’s egos, it’s relatively poor advice for several reasons. First, although every team is in a unique situation there is significant commonality so having at least a high-level process framework from which to start makes sense. Second, although these teams have a wide range of knowledge it might not be complete, nor consistent, nor is it clear what the trade-offs are of combining all the really good techniques that people know about. There is significant benefit in having a flexible process framework such as DAD which shows how everything fits together.
- IT professionals should validate their own work to the best of their ability BUT they likely aren’t testing experts so therefore need help picking up the appropriate skills. The mantra in the agile community is to test often and test early, and better yet to test first. As a result agile teams have adopted a “whole team” approach where the development team does its own testing. This works when there are people on the team with sufficient testing skills and more importantly can transfer those skills to others. Minimally you will need to embed testers into your delivery teams, but you should also consider explicit training and mentoring of everyone on the team in testing and quality skills. You may find my agile testing and quality strategies article to be an interesting read.
- Disciplined agile teams work in an iterative manner BUT still follow a lifecycle which is serial over time. On any given day people on a DAD project team may be performing analysis, testing, design, programming, deployment, or a myriad of other activities and iterating back and forth between them. But, the DAD lifecycle includes three distinct phases which are performed in order. So, DAD is both iterative in the small but serial in the large.
Yesterday I was involved with a workshop around agile development at scale. At one point in the conversation we started talking about the relationship between cost and quality. Some of the people in the workshop were relatively new to agile and still believed the traditional theory that to build in high quality it costs more, sometimes substantially more. This does appear to be true on traditional waterfall projects, but some people were making the mistake that this was an "natural law of IT" which also must apply to agile project teams. I naturally jumped on that idea and described how agile developers have found that writing high quality code leads to lower development costs and shorter time to value, in direct contradiction to traditional theory. A few people struggled with the idea for a bit, and one was pretty adamant that in some cases the need for very high quality does in fact lead to greater cost and time. He talked about his experiences on large-scale Rational Unified Process(RUP)
projects and in particular how some URPS (usability, reliability, performance, and supportability) requirements can increase your cost. At this point Per Kroll, co-author of Agility and Discipline Made Easy: Practices from OpenUP and RUP
, jumped into the conversation and pointed out although higher quality does lead to lower cost in most cases, using Toyota's lean approach to manufacturing as an example, that the agile community didn't completely have the relationship between quality and cost completely correct. My spidey sense told me that a learning opportunity was coming my way.
Per and I had an offline discussion about this to explore what he'd been observing in practice. In most situation it appears to be the case that higher quality does in fact lead to lower costs and shorter time for delivery, something that Per and I had observed numerous times. This happens because high quality code is much easier to understand and evolve than low quality code -- the agile community has found that it is very inexpensive to write high quality code by following practices such as continuous integration
, developer regression testing [or better yet test-driven development(TDD)
], static code analysis
, following common development conventions, and agile modeling strategies
. When you "bake in" quality from the start through applying these techniques, instead of apply traditional techniques such as reviews
and end-of-lifecycle testing (which is still valid for agile projects, but should not be your primary approach to testing) which have long feedback cycles
and therefore prove costly in practice. But, as we've learned time and again, when you find yourself in more complex situations of Agility@Scale sometimes the mainstream agile strategies fall down. For example, in situations where the regulatory compliance scaling factor is applicable, particularly regulations around protecting human life (i.e. the FDA's CFR 21 Part 11), you find that some of the URPS requirements require a greater investment in quality which can increase overall development cost and time. This is particularly true when you need to start meeting 4-nines requirements (i.e. the system needs to be available 99.99% of the time) let alone 5-nines requirements or more. The cost of thorough testing and inspection can rise substantially in these sorts of situations.
In conclusion, it does seem to be true in the majority of situations, which is what the level 1 rhetoric focuses on, that higher quality leads to lower development costs. But at scale this doesn't always seem to hold true.
PS -- Sorry for the corny title, but a couple of days ago at the Rational Software Conference I had the pleasure of interviewing Jamie Hyneman and Adam Savage from the Discovery Channel's Mythbuster's show as part of the conference keynote. They're great guys, BTW, who have had a really positive impact on motivating children to be interested in science (apparently kids like to see stuff get blown up, go figure).[Read More
One of the scaling factors
of the Agile Scaling Model (ASM)
is technical complexity.
The fundamental observation is that the underlying technology of solutions varies and as a result your approach to developing a solution will also need to vary.
It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch on a known technology platform, but not so easy when there are several technologies, the technologies are not well known, or legacy assets are involved.
There are several potential technical complexities which a Disciplined Agile Delivery (DAD) team may face:
- New technology platforms. Your team may choose to work with a technology platform which is either new to the team or sometimes even new to the industry. In the past few years new technology platforms include the Android operating system, Apple’s iPad platform, and various cloud computing (http://www.ibm.com/ibm/cloud/) platforms. Working with these platforms may require you to adopt new development tools and techniques, not to mention the need to train and mentor your staff in their usage. Furthermore, your team may need to allocate time for architectural spikes to explore how to use the new technology and to prove the overall architecture with working code early in the project lifecycle (this is a DAD milestone).
- Multiple technology platforms. IT solutions often run on multiple platforms. For example, a system’s user interface (UI) could run in a browser, access business logic implemented using J2EE on Websphere which in turn invokes web services implemented in COBOL running on a Z-series mainframe, and stores data in an Oracle database, a DB2 database, and in several XML files. Implementing new business functionality, or updating existing functionality, could require changes made on several of these platforms in parallel. The implication is that you’ll need to adopt tools and strategies which enable your team to develop, test, and deploy functionality on all of these platforms. Testing and debugging in particular will become more difficult as the number of technology platforms increases, potentially requiring you to adopt the practice of parallel independent testing. The Agility at Scale survey found that 34% of respondents indicated that their agile teams were working with multiple technology platforms.
- Legacy data. IT solutions should leverage existing, legacy data wherever possible to reduce the number of data sources and thereby increase data quality within your organization. Also, using existing data sources can potentially speed up development, assuming your team has a good relationship with the owners of the legacy data sources (sadly, this often isn’t the case as the Data Management Survey found). Working with legacy data sources may require improved database regression testing, practices, database refactoring practices, and agile approaches to data administration. The Agility at Scale survey found that 42% of respondents indicated that their agile teams were working with legacy data sources (personally, I’m shocked that this figure is so low, and fear that many agile teams are contributing to data quality problems within their organization as a result).
- Legacy systems. There are several potential challenges with legacy systems. First, the code quality may not be the best either because it was never really that good to begin with or because it’s degraded over the years as multiple people worked with it. You know you’ve got a quality problem if you’re either afraid to update the code or if when you do so you have to spend a lot of time debugging and then fixing problems revealed when doing the update. If the legacy system is a true asset for your organization you will want to pay off some of this technical debt by refactoring the code to make it of higher quality. Second, you may not have a full regression test suite in place, making it difficult to find problems when you do update the code let alone when you refactor it. Third, your development tools for your legacy code may be a bit behind the times. For example, I often run across mainframe COBOL developers still working with basic code editors instead of modern IDEs such as Rational Developer for System Z. Some of the strategies to deal effectively with legacy systems are to adopt a modern development toolset if you haven’t already done so (better yet, if possible adopt a common IDE across platforms and thereby reduce overall licensing and support costs) and to adopt agile practices such as static code analysis, dynamic software analysis, and continuous integration (CI). The Agile Project Initiation Survey found that 57% of respondents were integrating their new code with legacy systems and 51% were evolving legacy systems.
- Commercial off-the-shelf (COTS) solutions. COTS solutions, also called package applications, can add in a few complexities for agile teams. The packages rarely come with regression test suites, they often have rules about what you can modify and what you shouldn’t (rules that are ignored at your peril), and they’re often architected with the assumption that they’re the center of the architectural universe (which is a valid assumption if they’re the only major system within your organization). As I describe in my article Agile Package Implementations it is possible to take an agile approach to COTS implementations, although it may require a significant paradigm shift for the people involved. The Agility at Scale survey found that 15% of respondents indicated that their agile teams were working with COTS solutions.
- System/embedded solutions. For the sake of simplicity, if your team is developing a solution with both hardware and software aspects to it then you’re a systems project. Embedded systems are a specialization where the system has a few dedicated functions often with real-time constraints. Bottom line is that systems/embedded projects are typically more challenging than software-only projects – it gets really interesting when laws of physics starts to kick in, such as when you’re building satellites or space probes. I highly suggest Bruce Douglass’s book Real-Time Agility if you are interested in taking an agile approach to systems/embedded solution delivery.
The technical complexity faced by a project team is contextual – Working with four technology platforms is straightforward for someone used to dealing with seven, but difficult for someone used to dealing with just one. Recommended Reading: