In the early days of agile, the applications where agile development was applied were smaller in scope and relatively straightforward. Today, the picture has changed significantly and organizations want to apply agile development to a broader set of projects. Agile hence needs to adapt to deal with the many business, organization, and technical complexities today’s software development organizations are facing. This is what Agility@Scale is all about – explicitly addressing the complexities which disciplined agile delivery teams face in the real world.These agile scaling factors which we've found to be important are:
- Team size. Mainstream agile processes work very well for smaller teams of ten to fifteen people, but what if the team is much larger? What if it’s fifty people? One hundred people? One thousand people? Paper-based, face-to-face strategies start to fall apart as the team size grows.
- Geographical distribution. What happens when the team is distributed, perhaps on floors within the same building, different locations within the same city, or even in different countries? Suddenly effective collaboration becomes more challenging and disconnects are more likely to occur.
- Compliance requirement. What if regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable? These issues bring requirements of their own that may be imposed from outside your organization in addition to the customer-driven product requirements.
- Enterprise discipline. Most organizations want to leverage common infrastructure platforms to lower cost, reduce time to market, and to improve consistency. To accomplish this they need effective enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management disciplines. These disciplines must work in concert with, and better yet enhance, your disciplined agile delivery processes.
- Organizational complexity. Your existing organization structure and culture may reflect traditional values, increasing the complexity of adopting and scaling agile strategies within your organization. To make matters worse different subgroups within your organization may have different visions as to how they should work. Individually the strategies can be quite effective, but as a whole they simply don’t work together effectively.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. This lack of organizational cohesion can greatly increase the risk to your project.
- Technical complexity. Some applications are more complex than others. It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch, but not so easy if you’re working with existing legacy systems and legacy data sources which are less than perfect. It’s straightforward to build a system using a single platform, not so easy if you’re building a system running on several platforms or built using several disparate technologies. Sometimes the nature of the problem that your team is trying to address is very complex in its own right.
Each factor has a range of complexities, and each team will have a different combination and therefore will need a process, team structure, and tooling environment tailored to meet their unique situation. Further reading:
The Agile Scaling Model (ASM) is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size.
The ASM distinguishes between three scaling
- Core agile development. Core agile methods, such as Scrum and Agile Modeling, are self governing, have a value-driven system development lifecycle (SDLC), and address a portion of the development lifecycle. These methods, and their practices, such as daily stand up meetings and requirements envisioning, are optimized for small, co-located teams developing fairly straightforward systems.
- Disciplined agile delivery. Disciplined agile delivery processes, which include Dynamic System Development Method (DSDM) and Open Unified Process (OpenUP), go further by covering the full software development lifecycle from project inception to transitioning the system into your production environment (or into the marketplace as the case may be). Disciplined agile delivery processes are self organizing within an appropriate governance framework and take both a risk and value driven approach to the lifecycle. Like the core agile development category, this category is also focused on small, co-located teams delivering fairly straightforward systems. To address the full delivery lifecycle you need to combine practices from several core methods, or adopt a method which has already done so.
- Agility at Scale. This category focuses on disciplined agile delivery where one or more scaling factors are applicable. The eight scaling factors are team size, geographical distribution, regulatory compliance, organizational complexity, technical complexity, organizational distribution, domain complexity, and enterprise discipline. All of these scaling factors are ranges, and not all of them will likely be applicable to any given project, so you need to be flexible when scaling agile approaches to meet the needs of your unique situation. To address these scaling factors you will need to tailor your disciplined agile delivery practices and in some situations adopt a handful of new practices to address the additional risks that you face at scale.
The first step in scaling agile approaches is to move from partial methods to a full-fledged, disciplined agile delivery process. Mainstream agile development processes and practices, of which there are many, have certainly garnered a lot of attention in recent years. They’ve motivated the IT community to pause and consider new ways of working, and many organizations have adopted and been successful with them. However, these mainstream strategies (such as Extreme Programming (XP) or Scrum, which the ASM refers to as core agile development strategies) are never sufficient on their own; as a result organizations must combine and tailor them to address the full delivery life cycle. When doing so the smarter organizations also bring a bit more discipline to the table, even more so than what is required by core agile processes themselves, to address governance and risk.
The second step to scaling agile is to recognize your degree of complexity. A lot of the mainstream agile advice is oriented towards small, co-located teams developing relatively straightforward systems. But once your team grows, or becomes distributed, or you find yourself working on a system that isn’t so straightforward, you find that the mainstream agile advice doesn’t work quite so well – at least not without sometimes significant modification. Each of the scaling factors introduces their own risks, and when addressed effectively can actually reduce project risk, and for your project team to succeed you will want to identify the scaling factors applicable to the situation that you face and act accordingly. Unfortunately, this is a lot easier said (OK, in this case blogged about) than done.
IBM Rational advocates disciplined agile delivery as the minimum that your organization should consider if it wants to succeed with agile techniques. You may not be there yet, still in the learning stages. But our experience is that you will quickly discover how one or more of the scaling factors is applicable, and as a result need to change the way you work.
Modified by ScottAmbler
In 2009 I wrote a white paper entitled The Agile Scaling Model (ASM): Adapting Agile Methods for Complex Environments for IBM Rational. Apparently it's been taken down, which I think is unfortunate as it contains some interesting ideas that your organization may be able to benefit from.
The original white paper addresses several key issues:
It provides and explains a definition for disciplined agile delivery. A more up to date discussion of DAD can be found on the Disciplined Agile Delivery site.
It describes criteria to determine is a team is agile. I've explored this issue via several surveys over the years since then. See the January 2013 How Agile Are You? results.
It describes the ASM, which distinguishes between core agile development techniques, disciplined agile delivery strategies, and agility at scale. The ASM was superceded in early 2013 by the Software Development Context Framework (SDCF). Perhaps this is why the ASM paper was taken down??
It overviews the eight scaling factors which a delivery team may face, scaling factors which motivate changes in the process that you will follow and the tools that you will adopt. The SDCF provides my recent thoughts regarding scaling factors. I have also run various IT Surveys over the years exploring how well organizations fare at scaling agile.
It describes the implications of the ASM. My blog posting Scaling Agile: Start with a Disciplined Foundation covers this very well.
It argues that you should strive to be as agile as you need to be, and that will be driven by the situation that you face.
activities are evolutionary (iterative and incremental) and highly collaborative in nature. Initially requirements are explored at a high level via requirements envisioning
at the beginning of the project and the details are explored on a just-in-time (JIT) basis via iteration modeling
and model storming
activities. The way that you perform these agile practices, and the extent to which you do so, depends on the situation in which a project team finds itself. The Agile Scaling Model (ASM)
is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size. To see how this works, let's apply the concepts of the ASM to see how we would scale our agile approach to requirements.
First, let's consider how a small, co-located team would work. The first two categories of the ASM are core agile development and disciplined agile delivery
, the focus of both are small co-located teams in a fairly straightforward situation. In these situations simple techniques such as user stories
written on index cards and sketches on whiteboards
work very well, so the best advice that I can give is to stick with them. Some teams will take a test-driven development
(TDD) approach where they capture their requirements and design in the form of executable specifications
, although this sort of strategy isn't as common as it should be (yet!), likely because of the greater skill and discipline that it requires. Traditionalists often balk at this approach, believing that they need to document the requirements in some manner. But, for a small co-located team working in a collaborative manner, requirements documentation proves to be little more than busy work, often doing nothing more than justifying the existence of a business analyst who hasn't made the jump to agile yet. Don't get me wrong, there are good reasons to write some requirements documentation, and we'll see this in a minute, but you should always question any request for written specifications and try to find more effective ways to address the actual goal(s) motivating the request. Never forget that written documentation
is the least effective communication
option available to you.
Although inclusive tools
such as whiteboards and paper work well for requirements, for development activities you will need electronic tools. You will either put together an environment from point-specific tools or adopt something more sophisticated such as IBM Rational Team Concert (RTC)
which is already fully integrated and instrumented. RTC is a commercial tool, but luckily you can download a 10-license environment free of charge, which is just perfect for a small team. Larger teams, of course, will need to purchase licenses. One of the things that a disciplined agile delivery approach adds to core agile development is it addresses the full delivery life cycle, which is important because it explicitly includes pre-construction activities such as requirements envisioning. The first step in scaling agile techniques is to adopt a full delivery life cycle which covers the full range of activities required to initiate a project, produce the solution, and then release to solution to your end users.
More interesting is the third category of the ASM, Agility@Scale, and how its eight agile scaling factors
affect the way that you tailor your process and tooling strategy. Let's explore how each one could potentially affect your agile requirements strategy:
- Geographical distribution. The majority of agile teams are distributed in some manner -- some people are working in cubicles or private offices, on different floors, in different buildings, or even in different countries -- and when this happens your communication and coordination risks goes up. To counter this risk you will need to perform a bit more requirements envisioning up front to help ensure that everyone is working to the same vision, although this doesn't imply that you need to write detailed requirements speculations which would dramatically increase the risk to your project. Remember, agilists do just barely enough modeling and are prepared to iteratively elicit the details when they need to do so. The more distributed the team is the more likely they will need to adopt software-based requirements modeling tools such as IBM Rational Requirements Composer (RRC) which supports streamlined, agile requirements elicitation throughout the delivery life cycle. Index cards and whiteboards are great, but they're difficult to see if you're outside the room where they're posted. I've written a fair bit about distributed agile development in this blog.
- Team size. Some organizations, including IBM, are successfully applying agile techniques with teams of hundreds of people. A team of one hundred people will naturally work much differently than a team of ten people, or of one thousand people. Large teams are organized into collections of smaller teams, and the requirements for the overall project must be divvied up somehow between those teams. The implications are that as the team size grows you will need to invest a bit more time in initial requirements envisioning, and in initial architecture envisioning for that matter; you will need to use more sophisticated tools; and may need to use more sophisticated modeling techniques such as use cases and functional user interface prototypes. See large agile teams for more advice.
- Compliance requirement. When regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable you are likely going to be required to capture requirements specifications in some manner and to enact traceability between those requirements. However, I highly recommend that you read the actual regulations yourself and don't let bureaucrats interpret them for you (doesn't it always seem that their interpretation always results in an onerous, documentation heavy solution?) because I have yet to run into a regulation which required you to work in an ineffective manner. Managing your requirements as work items in RTC can often more than meet your regulatory requirements for documentation and traceability, although you may want to consider a tool such as IBM Rational RequisitePro for complex regulatory situations.
- Domain complexity. The manner in which you elicit requirements for a data entry application or an informational web site will likely be much simpler than for a bio-chemical process monitoring or air traffic control system. More complex domains will require greater emphasis on exploration and experimentation, including but not limited to prototyping, modeling, and simulation. Although user stories may be effective as a primary requirements artifact in simple domains, in more complex domains you are likely to find that you need to drive your requirements effort with more sophisticated modeling techniques.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. In these cases, particularly where the work is strictly organized between the various organizations (perhaps for security concerns), you may need a more sophisticated approach to managing the requirements. RTC enables you to organize the requirements between teams, and then to automatically track progress in real time via the RTC project dashboard.
- Technical complexity. The technical complexity of a solution can vary widely, from a single platform silo application to a multi-platform application working with legacy systems and data to a full-blown systems engineering effort. Complex technical domains, just like complex business domains, require more complex strategies for requirements elicitation and management. The requirements for your legacy systems are likely to have been captured using tools and techniques appropriate for that platform, for example the requirements for your COBOL application may have been captured using data flow diagrams and data models, whereas the requirements for your Java legacy application where captured using UML diagrams. The subteam working on the COBOL system might be using IBM Rational Application Developer (RAD) and RTC for Z whereas the Java subteam may use Eclipse with RTC. Because systems engineering projects can stretch on for years, particularly when the hardware is being developed in parallel to the software, sophisticated tooling such as IBM Rational DOORS is often used in these situations. For more information about systems engineering, see the IBM Rational Harmony process.
- Organizational complexity. Your approach to requirements elicitation and management will be affected by a host of organizational complexities, including your corporate culture. When the culture is flexible and collaborative you can be very agile in your approach to requirements, but as it becomes more rigid you become more constrained in what is considered acceptable and thus take on greater project risk. For example, many organizations still struggle with their approach to funding projects, often demanding that the project team provides an "accurate" estimate up front to which they will be held to. This in turn motivates risky behavior on the part of the development, including a "big requirements up front (BRUF)" approach where a detailed requirements speculation is developed early in the project. This is just one example of how questionable corporate culture can impact the way in which an agile team works.
- Enterprise discipline. Some organizations have enterprise-level disciplines, such as enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management in place. These disciplines can easily be agile and from what I can tell the more successful efforts appear to lean more towards the agile end of the spectrum rather than the traditional end. Having an enterprise business modeling effort underway will affect your project-level requirements strategy -- you'll be able to leverage existing models, have access to people who understand the domain at an enterprise level, and will likely need to map your project efforts back to your enterprise models. The enterprise modelers will likely be using tools such as IBM Rational System Architect or IBM Websphere Business Modeler.
It is important to note that the way that you tailor the agile practices that you follow, and the tools that you use, will reflect the situation that you find yourself in. In other words, you need to right size your process and the Agile Scaling Model (ASM) provides the context to help you do so. As you saw above, in simpler situations you will use the simpler tools and techniques which are commonly promoted within the core agile development community. But, when things become a bit more complex and one or more of the scaling factors applies you need to modify your approach -- just don't forget that you should strive to be as agile as you can be given the situation that you find yourself in.
My new paper Scaling Agile: An Executive Guide
is now available. As the title suggests the paper overviews how to scale agile strategies to meet your organization's unique needs. The executive summary:
Agile software development is a highly collaborative, quality-focused approach to software and systems delivery, which emphasizes potentially shippable working solutions produced at regular intervals for review and course correction. Built upon the shoulders of iterative development techniques, and standing in stark contrast to traditional serial or sequential software engineering methods, agile software delivery techniques hold such promise that IBM has begun to adopt agile processes throughout its Software Group, an organization with over 25,000 developers. But how can practices originally designed for small teams (10-12) be “scaled up” for significantly larger operations? The answer is what IBM calls “agility@scale.”
There are two primary aspects of scaling agile techniques that you need to consider. First is scaling agile techniques at the project level to address the unique challenges individual project teams face. This is the focus of the Agile Scaling Model (ASM).
Second is scaling your agile strategy across your entire IT department, as appropriate. It is fairly straightforward to apply agile on a handful of projects, but it can be very difficult to evolve your organizational culture and structure to fully adopt the agile way of working.
The Agile Scaling Model (ASM) defines a roadmap for effective adoption and tailoring of agile strategies to meet the unique challenges faced by a software and systems delivery team. Teams must first adopt a disciplined delivery lifecycle
that scales mainstream agile construction techniques to address the full delivery process, from project initiation to deployment into production. Then teams must determine which agile scaling factors
– team size, geographical distribution, regulatory compliance, domain complexity, organizational distribution, technical complexity, organizational complexity, or enterprise discipline, if any — are applicable to a project team and then tailor their adopted strategies accordingly to address their specific range of complexities.
When scaling agile strategies across your entire IT organization you must effectively address five strategic categories — the Five Ps of IT
: People, principles, practices, process, and products (i.e., technology and tooling). Depending on your organizational environment the level of focus on each area will vary. What we are finding within many organizations, including IBM, is that the primary gating factor for scaling agile across your entire organization is your organization’s ability to absorb change.
People who are new to agile are often confused about how agile teams address architecture, but luckily we're seeing more discussion around agile architecture
now in the community so this problem is slowly being addressed from what I can tell. But, what I'm not seeing enough discussion about, at least not yet, is how is enterprise architecture addressed in the overall agile ecosystem. So I thought I'd share some thoughts on the subject, based on both my experiences over the years (see the recommended resources at the bottom of this posting) as well as on an enterprise architecture survey
which I ran in January/February 2010.
My belief is that effective enterprise architecture, particularly in an agile environment, is:
- Business driven. Minimally your EA effort should be driven by your business, not by your IT department. Better yet it should be business owned, although this can be a challenge in many organizations because business executives usually aren't well versed in EA and view it as an IT function. Yes, IT is clearly an important part of EA but it's not the entirety of EA nor is it the most critical part. In many organizations the IT department initiates EA programs, typically because the business doesn't know to do so, but they should quickly find a way to educate the business in the need to own your organization's EA efforts.
- Evolutionary. Your enterprise architecture should evolve over time, being developed iteratively and introduced incrementally over time. An evolutionary approach enables you act on the concrete feedback that you receive when you try to actually implement it, thereby enabling you to steer its development successfully.
- Collaborative. The EA survey clearly pointed to "people issues" being critical determinants of success, and of failure, of EA programs. My experience is that the best enterprise architects, just like the best application architects, work closely with the intended audience of their work, both on the business side of things as well as on the IT side. They will "roll up their sleeves" and become active members of development teams, often in the role of Architecture Owner on agile teams or Architect on more traditional teams. Their mission is to ensure that the development teams that they work with leverage the EA, to mentor developers in architecture skills, and to identify what works and what doesn't in practice so that they can evolve the EA accordingly. Enterprise architects, architects in general, who don't participate actively on development teams (holding architecture reviews isn't active participation) run the risk of being thought of as "ivory tower" and thus easy to ignore.
- Focused on producing valuable artifacts. The most valuable artifacts are useful to the intended audience, are light weight, and ideally are executable. Many EA programs run aground when the enterprise architects focus on artifacts that they've always wanted but that development teams really aren't very excited about -- yes, it might be interesting to have a comprehensive comparison of cloud technologies versus mainframe technologies, but a collection of reusable services would be fare more interesting to them. A detailed enterprise data model indicating suggested data attributes would be intellectually interesting to develop, but a list of legacy data sources with a high-level description of their contents would be immediately valuable to many development teams. A detailed model depicting desired web services would be useful, but an actual collection of working services that I can reuse now would be even better.
- An explicit part of development. In Disciplined Agile Delivery (DAD) architectural activities are an explicit part of the overall delivery process. Part of the architectural advice is that delivery teams should work closely with their organization's enterprise architects so that they can leverage the common infrastructure, and sometimes to help build it out, effectively. Disciplined agile teams realize that they can benefit greatly by doing so.
The Agile Scaling Model (ASM)
calls out addressing enterprise disciplines, such as enterprise architecture, as one of eight scaling factors which may apply to a given project. The interesting thing about this scaling factor is that it's the only one where things get potentially easier for development teams when we move from the simple approach, having a project focus, to the more complex approach, where we have an enterprise focus. By having a common infrastructure to build to, common guidelines to follow, and valuable artifacts to reuse project teams can benefit greatly. So, I guess my advice is to seriously consider adding enterprise disciplines to your agile strategy.Recommended Resources:
One of the scaling factors
called out in the Agile Scaling Model (ASM)
is “regulatory compliance”. This name is a bit of a misnomer because this scaling factor really addresses two issues: complying to regulations imposed upon you from external sources and choosing to adhere to internal regulations willingly adopted by your organization. It is relatively common for agile teams to find themselves in such situations. For example, in the 2009 Agile Practices Survey
one third of respondents said that they were applying agile on projects where one or more industry regulations applied.
First let’s consider external regulatory compliance. In these situations you may face the need to undergo an audit by an external regulatory body with consequences for non-compliance ranging from anywhere to a warning to a fine or even to legal action. Sometimes even a warning may be a grave thing. A few years ago I was working with a pharmaceutical company which had discovered that a warning from the FDA for non-compliance with their CFR 21 Part 11 regulation, when reported in major newspapers, resulted on average in a half-billion dollar loss to their market capitalization as the result of a dip in their stock price. There are financial regulations such as Sarbanes-Oxley and Basel II, informational regulations such as HIPAA which focuses on health information privacy, technical regulations such as ISO 27002 for security practices, and even life-critical regulations such as some of the FDA regulations.
External regulations are typically managed by a government organization or industry watchdog will range in complexity and can have a myriad of effects on project teams. For example, you may need to be able to prove that you had a documented process and that you followed it appropriately; you may need to produce extra artifacts, or more detailed artifacts, than you normally would; you may need to add extra features to your solution, such as tracking financial information, that you wouldn’t have normally implemented; you may need to produce specific reports to be submitted to the regulatory body; or you may even need to submit your team to audits, sometimes scheduled and sometimes not, to ensure regulatory compliance. Interestingly, even though many of those requirements go against the agile grain, the 2009 Agility at Scale Survey
found that organizations were successfully applying agile techniques while still conforming to external regulations. So yes, it is possible to scale your agile strategy to address regulatory compliance.
Second, let’s consider compliance to internally adopted, or sometimes even developed, “regulations” which you will be potentially evaluated/appraised against. Perfect examples of these are process improvement frameworks such as CMMI and ISO 900x. Similar to external regulations, the 2009 Agility at Scale Survey
found that some agile teams are succeeding in situations where they have chosen to adopt such frameworks. It’s important to note that frameworks such as CMMI aren’t primarily about ensuring the compliance of development teams to a standard process, regardless of what CMMI detractors may claim, but instead about process improvement. Process improvement at the IT department (or beyond) is an enterprise discipline issue from the point of view of ASM, implying that frameworks such as CMMI affect more than one scaling factor.
When you find yourself in a regulatory situation, whether those regulations are imposed or willingly adopted, the best advice that I can give is to read the regulations and develop a strategy to conform to them in the most agile manner possible. If you let bureaucrats interpret the regulations you’ll likely end up with a bureaucratic strategy, but if you instead choose to take a pragmatic approach you will very likely end up with a very practical strategy. Part of that strategy is to treat the regulatory representative(s) within your organization as important stakeholders whom you interact with regularly throughout the project.
One of the scaling factors
called out in the Agile
Scaling Model (ASM)
is “geographic distribution". As with the other scaling factors the level of geographic distribution is a range, with co-located teams at one extreme and far-located at the other. When your team is co-located the developers and the primary stakeholders are all situated in the same work room. If you have some team members in cubicles or in separate offices then you're slightly distributed, if you're working on different floors in the same building you're a bit more distributed, if you're working in different buildings within the same geographic area (perhaps your team is spread across different office buildings in the same city or some people work from home some days) then your team is more distributed, if people are working in different cities in the same country you're more distributed, and finally if people are working in different cities around the globe you're even more distributed (I call this far located).
As your team becomes more distributed your project risk increases for several reasons:
- Communication challenges. The most effective means of communication between two people is face-to-face around a shared sketching space such as a whiteboard, and that requires you to be in the same room together. As you become more distributed you begin to rely on less effective communication strategies.
- Temporal challenges. When people are in different time zones it becomes harder to find common working times, increasing the communication challenges. One potential benefit, however, is the opportunity to do "follow-the-sun" development where a team does some work during their workday, hands off the work to another team in a significantly different time zone, who picks up the work and continues with it. This strategy of course requires a high degree of sophistication and discipline on the part of everyone involved, but offers the potential to reduce overall calendar time.
- Cultural challenges. As the team becomes more distributed the cultural challenges between sites typically increases. Different cultures have different work ethics, treat intellectual property differently, have different ideas about commitment, have different holidays, different approaches to things, and so on.
As you would imagine, because the project risk increases the more distributed your team is, the lower the average success rates of agile projects decrease as they become more distributed. The 2008 IT Project Success Survey
found that co-located agile teams has an average success rate of 79%, that near located teams (members were in same geographic area) had a success rate of 73%, and that far-located agile teams had a success rate of 55%. The success rate decreases similarly for project teams following other paradigms.
The practices that you adopt, and the way that you tailor the agile practices which you follow, will vary based on the level of geographic distribution of your team. For example, a co-located team will likely do initial architecture envisioning
on a whiteboard and keep it at a fairly high-level. A far-located team will hopefully choose to fly in key team members at the beginning of the project, at least the architecture owners
on the various sub-teams, to do the architecture envisioning together. They will likely go into greater detail because they will want to identify, to the best of their ability, the interfaces of the various subsystems or components which they'll be building. They'll also likely use a modeling tool such as Rational Rhapsody
to capture this information (note that it is very possible to use CASE tools in an agile manner, and that some agile teams in fact do so as the 2008 Modeling and Documentation Survey
Geographically distributed agile teams, at least the effective ones, will also use tools which reflect the realities of agile geographically distributed development (GDD). The Jazz platform
tools, particularly Rational Team Concert (RTC)
, are developed with agile GDD in mind. In fact, the RTC team itself is an agile GDD and they use RTC to develop RTC. Although index cards are a great way for co-located agile teams to capture high-level requirements such as user stories, you need an electronic strategy for a GDD team. RTC also supports communication between team members, distributed debugging, and many other features which distributed teams will find useful.
Interestingly, the Agility at Scale 2009 survey
found that it was quite common for agile teams to be geographically distributed in some manner:
- 45% of respondents indicated that some of their agile teams were co-located
- 60% of respondents indicated that some of their agile teams had team members spread out through the same building
- 30% of respondents indicated that some of their agile teams were working from home
- 21% of respondents indicated that some of their agile teams had people working in different offices in the same city
- 47% of respondents indicated that some of their agile teams had team members that were far located
The bottom line is that some organizations, including IBM, have been very successful applying agile techniques on geographically distributed teams. In fact, agile GDD is far more common than mainstream agile discussion seem to let on. Recommended Resources:
I'm happy to announce that A Practical Guide to Distributed Scrum
by Elizabeth Woodward, Steffan Surdek, and Matthew Ganis is now in print. I've been talking this book up in presentations and with customers the past few months and promised that I would let everyone know once it was available. I was one of several people who wrote forewords for the book, Ken Schwaber, Roman Pichler, and Matthew Wang also did so, and I've modified my foreword below to help you to understand a bit better what the book is about.
If you’re thinking about buying this book, you’re probably trying to answer one or more of the following questions: “What will I learn?”, “Should I spend my hard earned money on this book?”, “Will it be worth my valuable time to read it?”, and “Is this a book that I’ll refer to again and again?” To help you answer these questions, I thought I’d list a few user stories which I believe this book clearly fulfills:
As a reader I want:
- a book that is well-written and understandable
real-world examples that I can relate to
- quotes from actual people doing this in the field
- to understand the challenges that I’ll face with distributed agile development
As someone new to agile I want to:
- learn the fundamentals of Scrum
- understand the fundamentals of agile delivery
- learn about what actually works in practice
- discover how extend Scrum into an agile delivery process
As an experienced agile practitioner I want to learn:
- how to scale agile approaches for distributed teams
- how to overcome the challenges faced by distributed teams
- how to tailor existing agile practices to reflect the realities of distribution
- bout “new” agile practices which we might need to adopt
- techniques so that distributed team members can communicate effectively
- how to extend Scrum with proven techniques from Extreme Programming, Agile Modeling, and other agile methods
- how to address architectural issues on a distributed agile team
- how agile teams address documentation
- how agile teams can interact effectively with non-agile teams
As a Scrum Master I want to learn how to:
- lead a distributed agile team
- facilitate a distributed “Scrum of Scrums”
- facilitate the successful initiation of a distributed agile project
- facilitate communication and collaboration between distributed team members
As a Product Owner I want to learn:
- how to manage a product backlog on a distributed team
- about different categories of stakeholders whom I will need to represent
- about techniques to understand and capture the goals of those stakeholders
- how to manage requirements with other product owners on other sub-teams
- what to do during an end-of-sprint review
- how I can streamline things for the delivery team that I’m working with
As an agile skeptic I want to:
- see examples of how agile works in practice
- hear about the challenges faced by agile teams
- hear about where agile strategies don’t work well and what to do about it
I work with organizations around the world helping them to scale agile strategies to meet their real-world needs. Although this book is focused on providing strategies for dealing with geographical distribution, it also covers many of the issues that you’ll run into with large teams, complex problem domains and complex technical domains. An important aspect of scaling agile techniques is to first recognize that’s there’s more to scalability than dealing with large teams, something which this book clearly demonstrates.
At the risk of sounding a bit corny, I’ve eagerly awaited the publication of this book for some time. I’ve known two of the authors, Elizabeth and Matt, for several years and have had the pleasure of working with them and learning from them as a result. Along with hundreds of other IBMers I watched this book get written and provided input where I could. The reason why I’m so excited about it is that I’ve wanted something that I could refer the customers to that I work with and honestly say, “yes, we know that this works because this is what we do in practice”.
IBM is doing some very interesting work when it comes to scaling agile. We haven’t published enough externally, in my opinion, due to a preference for actively sharing our experiences internally. This book collects many of our experiences into a coherent whole and more importantly shares them outside the IBM process ecosystem. Bottom line is that I think that you’ll get a lot out of this book.
One of the scaling factors
of the Agile Scaling Model (ASM)
is technical complexity.
The fundamental observation is that the underlying technology of solutions varies and as a result your approach to developing a solution will also need to vary.
It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch on a known technology platform, but not so easy when there are several technologies, the technologies are not well known, or legacy assets are involved.
There are several potential technical complexities which a Disciplined Agile Delivery (DAD) team may face:
- New technology platforms. Your team may choose to work with a technology platform which is either new to the team or sometimes even new to the industry. In the past few years new technology platforms include the Android operating system, Apple’s iPad platform, and various cloud computing (http://www.ibm.com/ibm/cloud/) platforms. Working with these platforms may require you to adopt new development tools and techniques, not to mention the need to train and mentor your staff in their usage. Furthermore, your team may need to allocate time for architectural spikes to explore how to use the new technology and to prove the overall architecture with working code early in the project lifecycle (this is a DAD milestone).
- Multiple technology platforms. IT solutions often run on multiple platforms. For example, a system’s user interface (UI) could run in a browser, access business logic implemented using J2EE on Websphere which in turn invokes web services implemented in COBOL running on a Z-series mainframe, and stores data in an Oracle database, a DB2 database, and in several XML files. Implementing new business functionality, or updating existing functionality, could require changes made on several of these platforms in parallel. The implication is that you’ll need to adopt tools and strategies which enable your team to develop, test, and deploy functionality on all of these platforms. Testing and debugging in particular will become more difficult as the number of technology platforms increases, potentially requiring you to adopt the practice of parallel independent testing. The Agility at Scale survey found that 34% of respondents indicated that their agile teams were working with multiple technology platforms.
- Legacy data. IT solutions should leverage existing, legacy data wherever possible to reduce the number of data sources and thereby increase data quality within your organization. Also, using existing data sources can potentially speed up development, assuming your team has a good relationship with the owners of the legacy data sources (sadly, this often isn’t the case as the Data Management Survey found). Working with legacy data sources may require improved database regression testing, practices, database refactoring practices, and agile approaches to data administration. The Agility at Scale survey found that 42% of respondents indicated that their agile teams were working with legacy data sources (personally, I’m shocked that this figure is so low, and fear that many agile teams are contributing to data quality problems within their organization as a result).
- Legacy systems. There are several potential challenges with legacy systems. First, the code quality may not be the best either because it was never really that good to begin with or because it’s degraded over the years as multiple people worked with it. You know you’ve got a quality problem if you’re either afraid to update the code or if when you do so you have to spend a lot of time debugging and then fixing problems revealed when doing the update. If the legacy system is a true asset for your organization you will want to pay off some of this technical debt by refactoring the code to make it of higher quality. Second, you may not have a full regression test suite in place, making it difficult to find problems when you do update the code let alone when you refactor it. Third, your development tools for your legacy code may be a bit behind the times. For example, I often run across mainframe COBOL developers still working with basic code editors instead of modern IDEs such as Rational Developer for System Z. Some of the strategies to deal effectively with legacy systems are to adopt a modern development toolset if you haven’t already done so (better yet, if possible adopt a common IDE across platforms and thereby reduce overall licensing and support costs) and to adopt agile practices such as static code analysis, dynamic software analysis, and continuous integration (CI). The Agile Project Initiation Survey found that 57% of respondents were integrating their new code with legacy systems and 51% were evolving legacy systems.
- Commercial off-the-shelf (COTS) solutions. COTS solutions, also called package applications, can add in a few complexities for agile teams. The packages rarely come with regression test suites, they often have rules about what you can modify and what you shouldn’t (rules that are ignored at your peril), and they’re often architected with the assumption that they’re the center of the architectural universe (which is a valid assumption if they’re the only major system within your organization). As I describe in my article Agile Package Implementations it is possible to take an agile approach to COTS implementations, although it may require a significant paradigm shift for the people involved. The Agility at Scale survey found that 15% of respondents indicated that their agile teams were working with COTS solutions.
- System/embedded solutions. For the sake of simplicity, if your team is developing a solution with both hardware and software aspects to it then you’re a systems project. Embedded systems are a specialization where the system has a few dedicated functions often with real-time constraints. Bottom line is that systems/embedded projects are typically more challenging than software-only projects – it gets really interesting when laws of physics starts to kick in, such as when you’re building satellites or space probes. I highly suggest Bruce Douglass’s book Real-Time Agility if you are interested in taking an agile approach to systems/embedded solution delivery.
The technical complexity faced by a project team is contextual – Working with four technology platforms is straightforward for someone used to dealing with seven, but difficult for someone used to dealing with just one. Recommended Reading:
In previous blog postings I've defined Discipline Agile Delivery (DAD)
but I haven't shared the lifecycle (although I have done so in a couple of white papers, most recently Scaling Agile: An Executive Guide
) in this blog. Until now.
The DAD method combines strategies and practices from several software methods, including Scrum
, Extreme Programming (XP)
, Agile Modeling
, Agile Data
, and the Open Unified Process (OpenUP)
. One aspect of this "process idea reuse" is that the DAD extends the Scrum lifecycle to be a full-fledged delivery lifecycle. Figure 1 overviews the Scrum lifecycle, which addresses the construction aspects of agile delivery quite well. It depicts the product backlog which is a basic prioritized requirements stack
; the concept of delivering incrementally in consistent time boxes (what Scrum calls sprints and other methods such as DAD call iterations); holding a daily coordination meeting; and demoing your work at the end of the sprint/iteration/timebox to get feedback from key stakeholders. These are all great ideas, which is why the DAD method adopts and enhances them.Figure 1: The Scrum lifecycle. The focus is on the construction part of the lifecycle (click on the diagram for details).
Several years ago I wrote about the Agile lifecycle
and the need to extend it beyond construction, and this thinking is reflected in the DAD lifecycle of Figure 2. The DAD lifecycle extends the Scrum lifecycle in several important ways:
- It includes explicit phases. Sacrilege! Rhetoric aside, there are in fact serial aspects to agile software development. Project teams go through an initiation effort - called "warm up" in Eclipse Way, Inception in Unified Process, Sprint 0 in Scrum, and Iteration 0 in other methods - at the beginning of a project. Eventually the team will go through a release phase - called the "end game" in Eclipse Way
- It includes project initiation. During the Inception phase you perform basic project initiation activities such as requirements envisioning, architecture envisioning, initial release planning, getting funding for the project, and starting to build the team (among other tasks). In the summer of 2009 I ran the 2009 Agile Project Initiation survey which revealed that the average agile team spent 4 week on initiation activities such as this, that 89% did some sort of up-front requirements work, and that 85% did some sort of up-front architecture work.
- It includes release activities. The DAD lifecycle also includes a Transition phase where you release your solution into production or the marketplace. These activities typically include final testing and hardening of your solution, training end users, pilot/beta testing, finalizing documentation, running the solution in parallel with the system(s) being replaced, and so on.
- It explicitly indicates production activities. Many agile delivery teams are responsible for supporting the existing version(s) of their system which are currently running in production. Because there are existing versions, the team will be getting enhancement requests and defect reports from their operations and support people. Many of these requests can simply be treated as new requirements to be prioritized and put on the work item stack. Some need to be addressed right away, particularly "severity 1" defects, which requires the delivery team to "stop the line", address the problem, release a patch or hot fix, then reintegrate the changes into the version they're currently working on. My experience is that it's critical to include a production phase in your delivery lifecycle to make it explicit to the team that they need to take operations and support concerns into account.
- It explicitly enhances the product backlog. The product backlog has evolved into a work item list (or work item stack if you prefer). Disciplined agile teams put more than just requirements on the stack, as you read above it is common to treat defect reports as you do requirements.
- It explicitly includes critical milestone points. An important aspect of the DAD method is that not only does it support self organization such as Scrum but it does so within an appropriate governance framework. Disciplined agile teams recognize that they exist within a larger organization, that they should follow common development guidelines, that they should strive to leverage and build out the shared enterprise infrastructure, that they must report common metrics to senior management (hopefully automatically via the use of instrumented tooling such as we see on the Jazz platform).
One of the advantages of the DAD method over Scrum is that it doesn't require you to figure these common things out for yourself. Figure 2. The Disciplined Agile Delivery (DAD) lifecycle (basic). The focus is on the delivery portion of the system lifecycle, from starting a project to releasing the solution into production (click on the diagram for details).
Figure 3 depicts the advanced form of the DAD lifecycle. This form of the lifecycle occurs on experienced teams that have originally adopted the basic, Scrum-based lifecycle of Figure 2 and evolved it over time to be leaner. One of the implications of continuous improvement and continuous learning, key recommendations of the DAD process framework, is that your lifecycle will evolve. Primary changes that you see between Figure 2 and Figure 3 are the adoption of a work item pool
instead of a work item stack
and the abandonment of iterations (the critical observation is that practices such as detailed planning, demos, retrospectives and so on do not need to be on the same cadence, hence iterations disappear).
Figure 3. The Disciplined Agile Delivery (DAD) lifecycle (advanced). Over time you will improve your strategy towards a leaner approach (click on the diagram for details).
Figure 4. An older version of the basic DAD lifecycle using Scrum terminology. Use whatever terminology you're comfortable with, there is no "standard" (click on the diagram for details).
One of the differences that you may have noticed between the Scrum lifecycle of Figure 1 and the DAD lifecycle of Figure 2 is different terminology is used. For example, iteration is used instead of sprint. Work item list is used instead of product backlog. Although I believe that the terminology used in Figure 2 is more accurate, it really doesn't matter because it's easy to use Scrum terminology with DAD if you like. You can see this clearly in Figure 4. What is important is that you choose the terminology which you are most comfortable with, and be prepared to translate back and forth between terms as there are no standards and there never will be. As an aside, you might find Translating Scrum Terminology
to be of interest.
DAD is still a process framework that you'll need to tailor to meet your unique needs. More on this in future blog postings.
One of the scaling factors
called out in the Agile Scaling Model (ASM)
is domain complexity. The general idea is that agile teams will find themselves in different situations where some teams are developing fairly straightforward solutions, such as an informational website, whereas others are addressing very complex domains, such as building an air-traffic control system (ATCS). Clearly the team building an ATCS will work in a more sophisticated manner than the one building an informational website. I don't know whether agile techniques have been applied in the development of an ATCS, although I have to think that agile's greater focus on quality and working collaboratively with stakeholders would be very attractive to ATCS delivery teams, I do know that agile is being applied in other complex environments: The 2009 Agility at Scale Survey
found that 18% of respondents indicated that their organizations had success at what they perceived to be very complex problem domains,.
Increased domain complexity may affect your strategy in the following ways:
- Reaching initial stakeholder consensus becomes difficult. One of the risk reduction techniques called out in Disciplined Agile Delivery (DAD) is to come to (sufficient) stakeholder consensus at the beginning of the project during the Inception phase (called Sprint 0 in Scrum or Iteration 0 in other agile methods). Stakeholder consensus, or perhaps "near concensus" or "reasonable agreement" are better terms, can be difficult to come to the more complex the problem domain is because the stakeholders may not fully understand the implications of what they're making decisions about and because there is likely a greater range of stakeholders with differing goals and opinions. The implication is that your project initiation efforts may stretch out, increasing the chance that you'll fall back on the old habits of big requirements up front (BRUF) and incur the costs and risks associated with doing so.
- Increased prototyping during inception. It is very common for disciplined agile teams to do some light-weight requirements envisioning during inception to identify the scope of what they're doing and to help come to stakeholder consensus. The greater the complexity of the domain, and particularly the less your team understands about the domain, the more likely it is that you'll benefit from doing some user interface (UI) prototyping to explore the requirements. UI prototyping is an important requirements exploration technique regardless of paradigm, and it is something that you should consider doing during both initial requirements envisioning as well as throughout the lifecycle to explore detailed issues on a just in time (JIT) manner.
- Holding "all-hands reviews". One strategy for getting feedback from a wide range of people is to hold an "all hands review" where you invite a large group of people who aren't working on a regular basis with your team to review your work to date. This should be done occasionally throughout the project to validate that the input that you're getting from your stakeholder represenatives/product owners truly reflects the needs of the stakeholders which they represent. The 2010 How Agile Are You? Survey found that 42% of "agile teams" reported running such reviews.
- Increased requirements exploration. Simple modeling techniques work for simple domains. Complex domains call for more complex strategies for exploring requirements. The implication is that you may want to move to usage scenarios or use cases from the simpler format of user stories to capture critical nuances more effectively. A common misunderstanding about agile is that you have to take a "user story driven approach" to development. This is an effective strategy in many situations, but it isn't a requirement for being agile.
- The use of simulation. You may want to take your prototyping efforts one step further and simulate the solution. This can be done via concrete, functional prototypes, via simulation software, via play acting, or other strategies.
- Addition of agile business analysts to the team. Analysis is so important to agile teams we do it every day. In situations where the domain is complex, or at least portions of the domain is complex, it can make sense to have someone who specializes in exploring the domain so as to increase the chance that your team gets it right. This is what an agile business analyst can do. There are a few caveats. First, even though the domain is complex you should still keep your agile analysis efforts as light, collaborative, and evolutionary as possible. Second, this isn't a reason to organize your team as a collection of specialists and thereby increase overall risk to your project. The agile analyst may be brought on because their specialized skills are required, but the majority of the people on the team should still strive to be generalizing specialists. This is also true of the agile analyst because their may not be eight hours a day of valuable business analysis work on the team, and you don't want the BA filling in their time with needless busy work.
The important thing is to recognize that the strategies which work well when you're dealing with a simple domain will not work well for a complex domain. Conversely, techniques oriented towards exploring complex domains will often be overkill for simple domains. Process and tooling flexiblity is key to your success.
IBM Rational recently published an update to my Agility@Scale e-book
, which can be downloaded free of charge. The e-book is a 21 page, 2.3 meg PDF (sorry about the size, guess the graphics did it) . It overviews the Agile Scaling Model (ASM)
, Disciplined Agile Delivery (DAD), the scaling factors of Agility@Scale, and ends with some advice for becoming as agile as you can be. In short it's a light-weight coverage of some of the things I've been writing about in this blog the past couple of years. Could be a good thing to share with the decision makers in your organization if they're considering adoption agile strategies.