This blog posting has been replaced by the more detailed article: Full Agile Delivery Lifecycles.
Thank you for your patience.
ScottAmbler 120000HESD Etiquetas:  agileadopt scrum disciplined-agile-deliver... discipline dad lifecycle 25 Comentarios 60.389 vistas
This blog posting has been replaced by the more detailed article: Full Agile Delivery Lifecycles.
Thank you for your patience.
ScottAmbler 120000HESD Etiquetas:  agileadopt disciplined-agile-deliver... agile manifesto agility-at-scale 19 Comentarios 54.922 vistas
This article has been replaced by an official "Disciplined Agile Manifesto".
The text of the original article remains below.
I've recently been working with Mark Lines of UPMentors and we've had some interesting discussions around evolving the Agile Manifesto which I thought I would share here to obtain feedback. Note that this is not any sort of official position of IBM, nothing in my blog is by the way (unless explicitly stated so), nor is it some sort of devious plot to take over the agile world (although if we did have some sort of devious plot, we'd make the exact same claim). What we hope to accomplish is to put some ideas out there in the hopes of getting an interesting conversation going.
Updates Since this Was First Published:
There seems to be a lot of misunderstanding around the topic of "Agile RUP", so I thought I'd put in my $0.02 on the subject. I suspect that some of the misunderstanding stems from lack of knowledge about RUP, either because the person either hasn't looked at RUP and is simply parroting the misinformation they heard from other people or because they've seen or been involved with questionable implmentations of RUP in the past. For the first problem I suggest reading "Agility and Discipline Made Easy" by Per Kroll and Bruce MacIsaac because it gives a pretty good overview of applying RUP in an Agile manner.
The second problem is a bit more challenging to overcome because of the very nature of RUP. RUP isn't a software process, it's actually a software process framework from which you instantiate software processes. Big difference. You select, and tailor where appropriate, the process elements appropriate to your situation. Unfortunately many organizations appear to have struggled with this concept. A common anti-pattern which are organizations that look at the RUP and say "there's a lot of really good stuff here" (absolutely true) and then conclude "we need to do it all" (yikes). That's the equivalent of going to a buffet and trying to eat all of the food in it, very clearly a bad dietary strategy. Just like you need to pick and choose only the food that you should eat, hopefully being mature enough to choose food that is good for you, you need to pick the appropriate process elements which are good for you. This requires significant experience and process knowledge to do effectively because software development is a complex endeavor and the best approach for one situation may be completely different for another situation. A second anti-pattern is when organizations assign their existing process engineers, who are often used to document-heavy serial processes, and ask them to tailor the RUP. It isn't surprising that they often produce a document-heavy and serial version of the RUP (at that point I would argue that it's no longer RUP).
The point is that these problems are self-inflicted, that these organizations could just as easily have chosen to instantiate the RUP in a light and effective manner, and better yet in a truly agile manner. In practice the RUP can be as agile as you want it to be, but you need to choose to work this way.
Some important observations:1. RUP socialized many of the concepts that Agile was built on. Although the concept of iterative development was around long before RUP, for many organizations RUP made the concept palatable through its mature approach (particularly when compared to some of the RAD/Spiral strategies at the time). In many organizations RUP also socialized testing throughout the entire lifecycle, delivery of working software each iteration, and collaborating closely with stakeholders throughout the project (to name but a few). These ideas seem straightfoward today, and they've been taken to even greater extremes in some cases , but back in the mid-90s this was pretty heady stuff for the vast majority of practitioners within the IT community. 2. RUP has adopted many of the "new" agile techniques. RUP is a process framework containing a wealth of IT practices, including both agile and traditional practices (and a lot in between). RUP continues to evolve, capturing industry best practices from many sources. So naturally RUP has adopted many agile concepts such as test-driven development (TDD), continuous integration, embracing change, and others. Check it out and see for yourself.3. RUP is as agile, or non-agile, as you want to make it. I've said it before and I'll say it again -- the RUP is a process framework from which you instantiate processes. You've got complete control over how agile the RUP is.4. RUP contains many of critical techniques for scaling agile. In a previous blog posting I overviewed the issues around scaling, not only is team size an issue but so is geographical distribution, regulatory compliance, application complexity, legacy systems/policies, governance, and organizational distribution.
I'm sure some people are reading this and thinking to themselves "of course this is what Scott is going to say, that's his job." Well, think what you want, but I was writing about how to take an agile approach several years before joining IBM. In fact, I believe that I'm the first to do so, writing about it in print in my Software Development column back in 2001 and more importantly in my book Agile Modeling: Effective Practices for XP and UP in 2002. And, if you go poking around the web a bit, you'll see a lot other have written about this too, including Craig Larman, Ivar Jacobson, Bob Martin, Gary Evans, Doug Rosenberg and many more.
I'd like to leave you with a sound bite: "The RUP done right is Agile. The RUP done wrong is just plain wrong."[Read More]
In November 2011 Paul Gorans, the Accelerated Solution Delivery (ASD) practice lead in IBM GBS, and I ran an agile adoption survey. The survey explored a range of issue, including the factors that appear to be associated with the success and failure of agile project teams. Paul wrote up his thoughts in his Agile State of the Art Survey article on ibm.com and I did the same for Dr Dobb's Journal in Agile Success Factors. This blog posting summarizes the results of the survey.
Factors which appear to accelerate agile adoption include:
Factors which appear to decelerate agile adoption include:
ScottAmbler 120000HESD Etiquetas:  estimating agile agileadopt management agileexec 1 Comentario 23.300 vistas
For several years now I've written various articles and newsletters on the topics of estimating and funding strategies for software development projects, and in particular for agile software development projects. Whenever I talk to people about agile software development, or coach them in how to succeed at it, some of the very first questions that I'll be asked, particularly by anyone in a management role, is how to fund agile software development projects. Apparently a lot of people think that you can only apply agile strategies on small, straightforward projects where it makes sense to do a time and materials (T&M) approach. In fact you can apply agile strategies in a much greater range of situations, as the various surveys that myself and others are showing time and again. My goal with this blog posting is to summarize the various strategies for, and issues surrounding, the funding of agile software development projects.Modificado el por ScottAmbler
There are three basic strategies for funding projects, although several variations clearly exist. These strategies are:
The point is that there are several strategies for funding agile software development projects, just like there are several strategies for funding traditional software development projects. My experience is that fixed-price funding strategies are incredibly poor practice which increases the risk of your software development projects dramatically. I recognize how hard it can be to change this desire on the part of our business stakeholders, but have also had success changing their minds. If you choose to perservere, which is a difficult decision to make, you can help your organization's decision makers to adopt more effective strategies. Like you they want to improve the effectiveness of your IT efforts.
Further reading: (In recommended order)
ScottAmbler 120000HESD Etiquetas:  disciplined-agile-deliver... agileadopt agility-at-scale agile solution 22.231 vistas
An imporant step in scaling your agile strategy is to adopt a Disciplined Agile Delivery (DAD) approach instead of one which is just focused on agile construction. One aspect of adopting a DAD approach it to mature your focus from just producing software to instead providing a solution which meets the needs of its stakeholders within the appropriate economic, cultural, and technical constraints. The fundamental observation is that as IT professionals we do far more than just develop software. Yes, this is clearly important, but in addressing the needs of our stakeholders we will often:
Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "soft skills" such as user interface design and process design to name just two.
The shift to a solution-oriented focus from a software-oriented focus requires your agile teams to address some of the software-oriented prejudices which crept into the Agile Manifesto. The people who wrote the manifesto (which I fully endorse) were for the most part software developers, consultants, and in many cases both. It is little wonder that this group would allow a bias towards software development creep into the language of their manifesto.
ScottAmbler 120000HESD Etiquetas:  agile discipline disciplined-agile-deliver... agileadopt 20.527 vistas
There is a fair bit of rhetoric surrounding agile methods, some of which we subscribe to and some of which we don’t. We’d like to briefly examine the rhetoric which we’ve found to be the most misleading for people trying to be effective at adopting agile techniques. The following list is in the format X but Y, where X is the rhetoric and Y is the strategy promoted by the Disciplined Agile Delivery (DAD) process framework. This includes:
Recently Gina Poole blogged about IBM saved $300 million by going agile. That's not too bad when you think about it.
A few days later someone asked a series of questions that I thought would make an interesting blog posting, so here goes:
How much of IBM's projects (in percentage) are agile at the moment?
I don’t have exact numbers, but I believe that 90%+ of our teams in SWG are applying agile techniques in practical ways that make sense for their projects. The primary goal is to be effective – in frequent releases, higher quality, and happy customers – not just agile. By the way, there is roughly 30,000 developers in SWG.
Can all of IBM's projects work with an agile methodology?
It’s certainly possible, but it may not always make sense. Products that are in maintenance mode with few bugs or feature requirements may not benefit as much from agile practices -- those teams will likely continue to do whatever it is that they have been doing. Having said that, it's still highly desirable to apply agile techniques on maintenance projects.
Also, agile methods can be harder to use on some projects than others, for example, around hardware development. As a general rule, I believe that the majority of software projects can benefit from agile techniques. The primary determinant of whether a team can adopt agile techniques is culture and skill – not team size, the domain, or the degree of geographic distribution. That notion surprises many people who think that large agile teams or geographically distributed agile teams can’t succeed in adopting agile practices.
Are agile projects sub-parts of large waterfall projects?
In some cases, that may happen. I’m sure it’s also true in reverse. We see many customers who are migrating from waterfall projects to a more agile way of doing things, and they often start this migration with smaller sub-projects. At IBM, we have tens of thousands of developers worldwide on hundreds of teams, so we have examples of pretty much any combination of agile, iterative, and traditional practices that you can imagine. There’s definitely not one size that fits all, which is a key aspect of the Disciplined Agile Delivery (DAD) process framework.
What do you think the impact of these numbers will be on the PM community?
The IBM PM community is embracing agile. And the reality is that a majority of development organizations around the world are moving to agile now as well (as much as 80% in some of the recent studies I’ve seen). I look forward to the increased adoption of agile methods by the PM community in general. The fact that PMI now offers an Agile Certified Practitioner training program certainly underscores the fact that agile practices are being adopted widely in the mainstream which is a great thing to see.
ScottAmbler 120000HESD Etiquetas:  agile agileadopt disciplined-agile-deliver... 18.770 vistas
There is a distinct rhythm, or cadence, at different levels of the agile process. We call this the agile 3C rhythm, for coordinate, collaborate, and conclude (which is sometimes called stabilize). The agile 3C rhythm occurs at three levels in Disciplined Agile Delivery (DAD):
The agile 3C rhythm is similar conceptually to Deming’s Plan, Do, Check, Act (PDCA) cycle:
ScottAmbler 120000HESD Etiquetas:  modeling agility-at-scale agileadopt requirements 8 Comentarios 18.012 vistas
Contrary to popular belief, agile development teams do in fact model and yes, they even do some up front requirements and architecture modeling. Two of the best practices of Agile Modeling are Requirements Envisioning and Architecture Envisioning where you spend a bit of time at the beginning of the project doing enough initial modeling to get you going in the right direction. The strategy is to take advantage of modeling, which is to communicate and think things through without taking on the risks associated with detailed specifications written early in the lifecycle. In this blog posting I will focus on requirements envisioning, in a future posting I'll cover architecture envisioning.
The goal of initial requirements envisioning is to identify the scope of your effort. You need to do just enough modeling early in the project to come to stakeholder concurrence and answer questions such as what you're going to build, roughly how long it's going to take (give a range), and roughly how much it's likely to cost (once again, give a range). If you can get the right people together in the room, which can sometimes be a logistics challenge but not one that you couldn't choose to overcome, there are very few systems (I suspect less than 5%) that you couldn't initially scope out in a few days or a week. I also suspect that most of the remaining systems could be scoped out with less than 2 weeks of modeling, and if not then I'd take that as an indication that you're taking on too large of a project. I'm not saying that you'll be able to create big detailed specifications during this period, and quite frankly given the problems associated with "Big Requirements Up Front (BRUF)" you really don't want to, but I am saying that you could gain a pretty good understanding of what you need to do. The details, which you'll eventually need, can be elicited throughout the lifecycle when you actually need the information. A common saying in the agile community is that requirements analysis is so important for us that we do it every single day, not just during an initial phase. I'll discuss just in time (JIT) approaches to requirements modeling in a future posting.
To envision the requirements for a business application, you might want to consider creating the following models:
For small teams simple tools such as whiteboards and paper are usually sufficient for requirements envisioning. But what happens at scale? What if you're working on a large agile team, say of 50 people, 200 people (IBM has delivered software into the marketplace with agile teams of this size), or even 500 people (IBM currently has teams of this size applying agile techniques)? What if your team is distributed? Even if you have people working on different floors of the same building, let alone working from home or working in different cities or countries, then you're distributed (see my postings about distributed agile development). Suddenly whiteboards and paper-based tools (index cards, sticky notes, ...) aren't sufficient. You're still likely to use these sorts of tools in modeling sessions with stakeholders, but because of one or more scaling factors you need to capture your requirements models electronically.
In January Theresa Kratschmer and I gave a webcast entitled Agile Requirements: Collaborative, Contextual, and Correct which overviewed agile approaches to requirements elicitation and management, including requirements envisioning. We also showed how Rational Requirements Composer (RRC) can be used to electronically capture critical requirements information, enabling you to address the needs of large and/or distributed agile teams, while still remaining lightweight and flexible. I suspect that you'll find the webcast to be very illuminating and RRC something that you want to take a look at (the link leads to a trial version). Of course RRC can be used in other situations as well, but that's not what I'm focused on right now.
Teams which find themselves in regulatory environments will likely need to do more than just use RRC, as might very large teams. Regulatory compliance often requires more complex requirements documentation, which in turn requires more sophisticated tools such as DOORS or Requisite Pro, and I would consider using those tools in the types of situations that warrant it. One of the things that people often struggle to understand about agile approaches is that you need to tailor your strategy to reflect the situation at handle. One process size does not fit all, so you will end up using different tools and creating different artifacts to different extents in different situations. Repeatable results, not repeatable processes, is the rule of the day.