Modified by ScottAmbler
This article has been replaced by an official "Disciplined Agile Manifesto".
The text of the original article remains below.
I've recently been working with Mark Lines of UPMentors and we've had some interesting discussions around evolving the Agile Manifesto which I thought I would share here to obtain feedback. Note that this is not any sort of official position of IBM, nothing in my blog is by the way (unless explicitly stated so), nor is it some sort of devious plot to take over the agile world (although if we did have some sort of devious plot, we'd make the exact same claim). What we hope to accomplish is to put some ideas out there in the hopes of getting an interesting conversation going.
Over the past decade we’ve applied the ideas captured in the Agile Manifesto and have learned from our experiences doing so. What we’ve learned has motivated us to suggest changes to the manifesto to reflect the enterprise situations which we have applied agile and lean strategies in. We believe that the changes we’re suggesting are straightforward:
Where the original manifesto focused on software development, a term which too many people have understood to mean only software development, we suggest that it should focus on solution delivery.
Where the original focused on customers, a word that for too many people appears to imply only the end users, we suggest that it focus on the full range of stakeholders instead.
Where the original manifesto focused on development teams, we suggest that the overall IT ecosystem and its improvement be taken into consideration.
Where the original manifesto focused on the understanding of, and observations about, software development at the time there has been some very interesting work done within the lean community since then (and to be fair there was very interesting work done within that community long before the Agile Manifesto was written). We believe that the Agile Manifesto can benefit from lean principles.
Our suggested rewording of the Agile Manifesto follows, with our suggested changes in italics.
Updating the Values of the Agile Manifesto
We are uncovering better ways of developing software by doing it and helping others do it. Through this work we have come to value:
Individuals and interactions over processes and tools
Working solutions over comprehensive documentation
Stakeholder collaboration over contract negotiation
Responding to change over following a plan
That is, while there is value in the items on the right, we value the items on the left more.
Updating the Principles behind the Agile Manifesto
Our highest priority is to satisfy the customer through early and continuous delivery of valuable solutions.
Welcome changing requirements, even late in the solution delivery lifecycle. Agile processes harness change for the stakeholder’s competitive advantage.
Deliver working solutions frequently, from a couple of weeks to a couple of months, with a preference to the shorter timescale.
Stakeholders and developers must work together daily throughout the project.
Build projects around motivated individuals. Give them the environment and support they need, and trust them to get the job done.
The most efficient and effective method of conveying information to and within a delivery team is face-to-face conversation.
Quantified business value is the primary measure of progress.
Agile processes promote sustainable development. The sponsors, developers, and users should be able to maintain a constant pace indefinitely.
Continuous attention to technical excellence and good design enhances agility.
Simplicity--the art of maximizing the amount of work not done--is essential.
The best architectures, requirements, and designs emerge from self-organizing teams.
At regular intervals, the team reflects on how to become more effective, then tunes and adjusts its behavior accordingly.
Leverage and evolve the assets within your organizational ecosystem, and collaborate with the people responsible for those assets to do so.
Visualize workflow to help achieve a smooth flow of delivery while keeping work in progress to a minimum.
The organizational ecosystem must evolve to reflect and enhance the efforts of agile teams, yet be sufficiently flexible to still support non-agile or hybrid teams.
We’re agile – things evolve, including manifestos. Looking forward to your feedback (add a comment).
Updates Since this Was First Published:
The explicit phases of the Unified Process -- Inception, Elaboration, Construction, and Transition -- and their milestones are important strategies for scaling agile software development to meet the real-world needs of modern organizations. Yes, I realize that this is heresy for hard-core agilists who can expound upon the evils of serial development, yet these very same people also take a phased approach to development although are loathe to admit it. The issue is that the UP phases are like seasons of a project: although you'll do the same types of activities all throughout a project, the extent to which you do them and the way in which you do them change depending on your goals. For example, at the beginning of a development project if you want to be effective you need to do basic things like identify the scope of the project, identify a viable architecture strategy, start putting together your team, and obtain support for the project. Towards the end of a project your focus is on the activities surrounding the deployment of your system into production, including end-of-lifecycle testing efforts, training, cleaning up of documentation, piloting the system with a subset of users, and so on. In between you focus on building the system, including analysis, design, testing, and coding of it. Your project clearly progresses through different phases, or call them seasons if the term phase doesn't suit you, whether your team is agile or not.
The UP defines four phases, each of which address a different kind of risk:1. Inception. This phase focuses on addressing business risk by having you drive to scope concurrence amongst your stakeholders. Most projects have a wide range of stakeholdres, and if they don't agree to the scope of the project and recognize that others have conflicting or higher priority needs you project risks getting mired in political infighting. In the Eclipse Way this is called the "Warm Up" iteration and in other agile processes "Iteration 0".2. Elaboration. The goal of this phase is to address technical risk by proving the architecture through code. You do this by building and end-to-end skeleton of your system which implements the highest-risk requirements. Some people will say that this approach isn't agile, that your stakeholders should by the only ones to prioritize requirements. Yes, I agree with that, but I also recognize that there are a wide range of stakeholders, including operations people and enterprise architects who are interested in the technical viability of your approach. I've also noticed that the high-risk requirements are often the high-business-value ones anyway, so you usually need to do very little reorganization of your requirements stack.3. Construction. This phase focuses on implementation risk, addressing it through the creation of working software each iteration. This phase is where you put the flesh onto the skeleton.4. Transition. The goal of this phase is to address deployment risk. There is usually a lot more to deploying software than simply copying a few files onto a server, as I indicated above. Deployment is often a complex and difficult task, one which you often need good guidance to succeed at.
Each phase ends with a milestone review, which could be as simple as a short meeting, where you meet with prime stakeholders who will make a "go/no-go" decision regarding your project. They should consider whether the project still makes sense, perhaps the situation has changed, and that you're addressing the project risks appropriately. This is important for "agile in the small" but also for "agile in the large" because at scale your risks are often much greater. Your prime stakeholders should also verify that you have in fact met the criteria for exiting the phase. For example, if you don't have an end-to-end working skeleton of your system then you're not ready to enter the Construction phase. Holding these sorts of milestone reviews improves your IT governance efforts by giving senior management valuable visibility at the level that they actually need: when you have dozens or hundreds of projects underway, you can't attend all of the daily stand up meetings of each team, nor do you even want to read summary status reports.
These milestone reviews enable you to lower project risk. Last Autumn I ran a survey via Dr. Dobb's Journal (www.ddj.com) which explore how people actually define success for IT projects and how successful we really were. We found that when people define success in their own terms that Agile has a 71% success rate compared with 63% for traditional approaches. Although it's nice to that Agile appears to be lower risk than traditional approaches, a 71% success rate still implies a 29% failure rate. The point is that it behooves us to actively monitor development projects to determine if they're on track, and if not either help them to get back on track or cancel them as soon as we possibly can. Hence the importance of occasional milestone reviews where you make go/no-go decisions. If you're interested in the details behind the project, they can be found at http://www.ambysoft.com/surveys/success2007.html .
Done right, phases are critical to your project success, particularly at scale. Yes, the traditional community seems to have gone overboard with phase-based approaches, but that doesn't mean that we need to make the same mistakes. Let's keep the benefit without the cost of needless bureaucracy.[Read More
I recently wrote an "e-book" for Internet Evolution overviewing agile software development at scale. The goal of the Agility at Scale: Become as Agile as You Can Be
ebook is to get people thinking outside of the box a bit when it comes to agile development strategies and see that they really are ready for primetime.
For some reason, it seems as if everyone's grandfather at one point in time recommended to use the right tools for the job. That's practical wisdom from my point of view, one that is certainly an issue for agile development.
One of the primary messages, I hope, of the Agile Scaling Model (ASM)
is that context counts. Although the focus of the ASM is on describing a contextual framework for tailoring your process to meet the needs of the situation that you find yourself in, it's also applicable to your tooling selection. For example, the tool choices of a co-located team will be much different than that of a geographically distributed team. A co-located team will likely use a whiteboard
or paper for their agile modeling
efforts, whereas distributed team members may need to capture their diagrams using a more sophisticated tool such as Rational Requirements Composer (RRC)
so that their work can be shared electronically. Having said that, RRC would be overkill for a co-located team (unless they had regulatory compliance issues). Different teams, different situations, therefore different tooling choices.
One of the concerns that I run into from customers is that some of our legacy products don't support agile very well. Once again, it's a matter of context because many of our legacy products reflect the realities faced by more traditional teams. The challenge occurs when you try to take a legacy product which is well suited for traditional development, such as Rational ClearCase
, and try to apply it on agile projects. Although ClearCase makes sense in certain scaling situations, particularly very large teams that are geographically distributed, you'd be better advised to use something like Rational Team Concert (RTC)
for configuration management on most agile teams (note that RTC does far more than just SCM).
So, if you're taking an agile approach you should consider Rational tools such as RTC, RRC, Rational BuildForge
, Rational AppScan
, and others which support agile
development. Granted, some you would only use at scale -- for example Buildforge is a good option in really complex environments, but if you don't face that complexity then you'll likely find that RTC's build engine is sufficient. Similarly, if you're taking a traditional approach to development then you'll likely consider products such as ClearCase, Appscan, RTC, and Rational Software Architect (RSA)
instead. Different situations, different tooling choices.
What's even more confusing is that some products support a range of process paradigms. For example, RTC supports agile, lean, iterative, and traditional approaches to development. The same can be said of Appscan and several other products. Notice how I listed RTC and Appscan for both agile and traditional development above.
So, if anyone tells you that Rational tools don't support agile development don't believe them. Ask them which tools that they're talking about, and ask them if they're aware of the Rational products that do support agile development. Context counts.
When you are first adopting agile techniques in your organization a common strategy is to run one or more pilot projects. When organizing these projects you typically do as much as you can to make them successful, such as finding:
- Projects where the stakeholders are willing to actively work with you.
- IT people who are flexible, willing to try new things, and willing to collaborate with one another.
- IT people who are generalizing specialists, or at least willing to become so.
- Finding a project which is of medium complexity (therefore it's "real" in the sense that it's significant to your organization) but not one where it can make or break your organization (therefore it's safe to experiment with).
In North America we refer to this as "cherry picking" because you're picking the cherry/best situation that you can find.
- Being agile may not have been the primary determinant of success. You set up an environment where you have a good relationship with your stakeholders, where you have good people who want to work together, and the project is challenging but not impossible. Oh, and by the way you adopted a few agile techniques as well. Sounds to me that situation you could have adopted a few not-so-agile techniques instead and still succeed. Although my various project success surveys, see my IT surveys page for details, have shown time and again that agile project teams are more successful than traditional project teams I haven't been able to tease out (yet) whether this success is attributable to agile or just attributable to improved project initiation efforts.
- When adopting agile/lean widely across your organization, you can't cherry pick any more. For the past few years I've been working with IT organizations that are in the process of adopting agile/lean strategies across their entire organization, not just across a few pilot projects. What these organizations are finding is that they need to find ways to adopt agile where the business isn't as willing to work with IT, where some of the people aren't so flexible or collaborative, where some of the people are narrowly specialized and not as willing to expand their skills, or where the project exhibits scaling factors which motivates you to tailor your agile approach. It's harder to succeed with agile in these situations because they're not as "cherry" as what you've experienced previously. Luckily, if you've been successful previously then you now have some agile experienced people, you have successes to reference, and you've likely overcome some problems even in the cherry situations which you have learned from. So, your cherry successes will hopefully improve your ability to succeed even in "non cherry" situations.
- You need to work smarter, not harder. If the source of your success was actually from improved project initiation practices and not from agile, then recognize that and act accordingly. Realistically part of your success was from that and part was from agile, and the organizations that adopt a measured improvement approach potentially have the data to determine which practices lead to success and which didn't. Without the metrics you're effectively flying blind when it comes to deciding how to improve. There is clearly a mandate for smarter work practices within IT, within your organization as a whole for that matter.
If you want to gain more insight into some of the issues that you'll face when adopting agile across your organization, I suspect that you'll find my recent paper Scaling Agile: An Executive Guide
to be interesting. I've got a more detailed paper in the works, so stay tuned to this blog.
Recently I spent some time in the UK with Julian Holmes of Unified Process Mentors
. In one of our conversations we deplored what we were seeing in the agile community around certification, in particular what the Scrum community was doing, and he coined the term “integrity debt” to describe the impact it was having on us as IT professionals. Integrity debt is similar to technical debt
which refers to the concept that poor quality (either in your code, your user interface, or your data) is a debt that must eventually be paid off through rework. Integrity debt refers to the concept that questionable or unprofessional behavior builds up a debt which must eventually be paid off through the rebuilding of trust with the people that we interact with.
The agile community has been actively increasing their integrity debt through the continuing popularity of Scrum Certification, in particular the program around becoming a Certified Scrum Master (CSM). To become a CSM you currently need to attend, and hopefully pay attention during, a two-day Scrum Master Certification workshop taught by a Certified Scrum Trainer (CST). That’s it. Granted, some CSTs will hold one or more quizzes which you need to pass, an optional practice which isn’t done consistently, to ensure that you pay attention in the workshop.
Scrum Masters, as you know, take the leadership position on a Scrum team. The idea that someone can master team leadership skills after two entire days of training is absurd. Don’t get me wrong, I’m a firm supporter of people increasing their skillset and have no doubt that many of the CSTs deliver really valuable training. However, there is no possible way that you can master a topic, unless it
is truly trivial, in only two days of training. From what I can tell the only thing that is being certified here is that your check didn’t bounce.
The CSM scheme increases the integrity debt of the IT industry by undermining the value of certification. When someone claims that they’re certified there’s an assumption that they had to do something meaningful to earn that certification. Attending a two-day course, and perhaps taking a few quizzes where you parrot back what you’ve heard, clearly isn’t very meaningful. The problem with the term Certified Scrum Master is two-fold: not only does the term Certified imply that the holder of the certification did something to earn it, the term Master implies that they have significant knowledge and expertise gained over years of work.
It is very clear that people are falling for the Scrum certification scheme.
A quick search of the web will find job ads requiring that candidates be CSMs, undoubtedly because they don’t realize that there’s no substance behind the certification. Whenever I run into an organization that requires people to be CSMs I walk them through the onerous process of earning the designation and suggest that they
investigate the situation themselves. Invariably, once they recognize the level of deception, the customer drops the requirement that people be CSMs.
Another quick search of the web will find people bragging about being a CSM, presumably being motivated by the employment opportunities within the organizations gullible enough to accept Scrum certification at face value. My experience is that the people claiming to be CSMs are for the most part decent, intelligent people who 99.99% of the time have far more impressive credentials to brag about than taking a two-day course. Yet, for some reason they choose to park their integrity at the door when it comes to Scrum certification. I suspect that this happens in part because they see so many other people doing it, in part because they’re a bit desperate to obtain or retain employment in these tough economic times, and in part because the IT industry doesn’t have a widely accepted code of ethical conduct. These people not only embarrass themselves when they indicate on their business cards or in their email signatures that they’re Certified Scrum Masters they also increase the integrity debt of the agile community as a whole.
Yet another search of the web will find people bragging about being Certified Scrum Trainers (CSTs), the people whom have been blessed by the Scrum Alliance to deliver Scrum master certification courses. Once again, my experience is that these are intelligent, skilled people, albeit ones who have also parked their integrity at the door in the pursuit of a quick buck. Surely these people could make a decent living via more ethical means? I know that many of them have done so in the past, so I would presume that they could do so in the future. The actions of the CSTs increase our integrity debt even further.
The group of people who have most embarrassed themselves, in my opinion, are those whom we consider thought leaders within the agile community. Leaving aside the handful who are directly involved with the Scrum certification industry, the real problem lies with those who have turned a blind eye to all of this. The Scrum certification scheme was allowed to fester within our community because few of our thought leaders had the courage to stand up and publicly state what they were talking about in private. This of course is all the more galling when you consider how much rhetoric there is around the importance of courage on software development projects. As Edmund Burke once observed, all that is necessary for evil to triumph is for good men to do nothing.
There are several things that we can do today to start paying off some of our integrity debt:
- Be discerning, not deceptive. If you’re going to list credentials on your email signature or business card then only choose to list the ones that actually mean something.
- Educate human resources people. Make them aware of what “Certified Scrum Master” really means and let them think for themselves. I highly suspect that if HR people realized what was going on the demand for CSMs would plummet, and in turn people wouldn’t be tempted by Scrum certification.
- Act professional, don’t just claim to be certified. Instead of signing up for every easy certification that comes your way why not simply do a good job and let the people you work with be your claim to fame? The good news is that for the past few years the agile community has tried to pay down some of the IT industry’s integrity debt that we have with our stakeholders by providing better return on investment (ROI), delivering systems which are more effective at addressing the needs of your stakeholders, by working in a more timely manner, and by producing greater quality work. All of these claims are borne out by the 2008 Software Development Project Success Rate Survey by the way.
- Recognize that adding a test doesn’t address the underlying problems. For the past year there’s been a move afoot to have people pass a test as part of earning their CSM (apparently it’s been a challenge to create a non-trivial test to validate your understanding of a topic that you can master by taking a two-day training course). This is something that should have been done from the very beginning, along with some sort of peer review, not years later when the damage has been done. Adding a test at this late date isn’t going to remove the stink that’s built up over the years, but sadly it will fool a few people into believing that they’ve covered it up.
- Recognize that there is a demand for certification. The agile community needs to put together a decent certification program, something that the Scrum Alliance has clearly failed at doing. My article Coming Soon: Agile Certification provides some thoughts as to what we need to do. The good news is that people such as Ron Jeffries and Chet Hendrickson, and others, are putting together a developer certification program. The really good news is that these are the right people to do this. The really bad news is that they’re doing it under the aegis of the Scrum Alliance, so whatever they accomplish will unfortunately be tainted by the fallout of the CSM debacle.
If we're going to scale agile software development strategies to meet the range of challenges faced by modern organizations, we need to be trustworthy. Is claiming to be a certified master after taking a two-day course an act which engenders trust? I don't think so. As individuals we can choose to do better. As a community we need to.Suggested Reading
- Agile Certification -- A humorous look at certification.
- IT Surveys -- A great resource for statistics about what IT people are actually doing in practice.
I was recently in Bangalore speaking at the Rational Software Conference, which was really well done this year, and visiting customers. In addition to discussing how to scale agile software development approaches, particularly when the team is distributed geographically and organizationally, I was also asked about what I thought about a software factory approach to development. My instinctual reaction was negative, software factories can result in lower overall productivity as the result of over specialization of staff (I prefer generalizing specialists
), too many hand-offs between these specialists (I find close collaboration to be far more effective), and too much bureaucratic overhead to coordinate these activities. I initially chalked it up to these people still believing that software development was mostly a science, or perhaps an engineering domain, whereas my experiences had made me come to believe that software development is really more art than it is a science. Yet, the consistent belief in this strategy by very smart and experienced people started me thinking about my position.
Just let me begin by saying that this blog posting isn't meant to be yet another round in the age old, and relatively inane, "art vs. science" debate within the software development community. That debate is a symptom of versusitis
, a dread disease which particularly plagues the IT industry and which can any of us at any time. There is no known cure, although the combination of experience, open-mindedness, and critical thought are the best inoculation against versusitis that we have so far. In that vein, let me explore the issues as I see them and I will let you think for yourself.
On the one hand software development has aspects of being an art for several reasons. First, the problem definition is never precise, nor accurate, and even when we have detailed specifications the requirements invariably evolve
anyway. The lack of defined, firm requirements requires us to be flexible and to adjust to the situation that we find ourselves in. Second, teams typically find themselves in unique situations, necessitating a unique process and tool environment to reflect this (assuming that you want to be effective, otherwise there's nothing stopping you from having a "repeatable process" and consistent tool environment). Third, software is built by people for people, requiring that the development team have the ability to build a system with a user interface which meets the unique needs of their end users. One has only to look at the myriad UI designs out there to see that surely there is a bit of art going on. Fourth, if software development wasn't at least partially art then why hasn't anyone succeeded at building tools which take requirements as inputs and produce a viable solution that we can easily deploy? It's been over four decades now, so there's been sufficient time and resources available to build such tooling. Fifth, regardless of how much of a scientific/business facade we put over it, our success rate at producing up front detailed cost estimates and schedules speak for itself (see Funding Agile Projects
for links to articles).
On the other hand software development has aspects of being a science for several reasons. First, some aspects of software development have in fact been automated to a significant extent. Second, there is some mathematical basis to certain aspects of software development (although in the case of data-oriented activities the importance of relational theory
often gets blown way out of proportion and I have yet to see a situation where formal methods proved to be of practical value).
What does this have to do with Agility@Scale. As you know, one of the agile scaling factors
is Organizational Complexity, and cultural issues are the hardest to overcome. Whether your organization believes that software development is mostly an art or mostly a science is a cultural issue which will be a major driver in you choice of methods and practices. Organizations which believe that software development is more of a science will prefer strategies such as software factories, model-driven architecture (MDA),
and master data management (MDM)
. And there is ample evidence to support the claims that some organizations are succeeding at these strategies. Although you may not agree with these strategies, you need to respect the fact that many organizations are making them work in their environments. Similarly, organizations which believe that software development is more of an art will find that agile and lean strategies are a better fit, and once again there is ample evidence that organizations are succeeding with these approaches (there's also evidence that agile projects are more successful
than traditional projects, on average). Once again, you may not agree with these strategies but you need to respect the fact that other people are making them work in practice.
Trying to apply agile approaches within an organization that believes software development is mostly a science will find it difficult at best, and will likely need to embark on a multi-year program to shift their culture (likely an expensive endeavor which won't be worth the investment). Similarly, trying to apply a software factory strategy in an organization that believes that software development is mostly an art will also run aground. The bottom line is that one size does not fit all, that one strategy is
not right for all situations and that you need to understand the trade-offs of various strategies, methodologies, techniques, and practices and apply them appropriately given the situation that you face. In other words, it depends! If you are embarking on a software process initiative, and you don't have the broad experience required to effective choose between strategies (very few organizations do, although many believe otherwise), then you should consider Measured Capability Improvement Framework (MCIF)
to help increase your chance of success.
In the early days of agile, the applications where agile development was applied were smaller in scope and relatively straightforward. Today, the picture has changed significantly and organizations want to apply agile development to a broader set of projects. Agile hence needs to adapt to deal with the many business, organization, and technical complexities today’s software development organizations are facing. This is what Agility@Scale is all about – explicitly addressing the complexities which disciplined agile delivery teams face in the real world.These agile scaling factors which we've found to be important are:
- Team size. Mainstream agile processes work very well for smaller teams of ten to fifteen people, but what if the team is much larger? What if it’s fifty people? One hundred people? One thousand people? Paper-based, face-to-face strategies start to fall apart as the team size grows.
- Geographical distribution. What happens when the team is distributed, perhaps on floors within the same building, different locations within the same city, or even in different countries? Suddenly effective collaboration becomes more challenging and disconnects are more likely to occur.
- Compliance requirement. What if regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable? These issues bring requirements of their own that may be imposed from outside your organization in addition to the customer-driven product requirements.
- Enterprise discipline. Most organizations want to leverage common infrastructure platforms to lower cost, reduce time to market, and to improve consistency. To accomplish this they need effective enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management disciplines. These disciplines must work in concert with, and better yet enhance, your disciplined agile delivery processes.
- Organizational complexity. Your existing organization structure and culture may reflect traditional values, increasing the complexity of adopting and scaling agile strategies within your organization. To make matters worse different subgroups within your organization may have different visions as to how they should work. Individually the strategies can be quite effective, but as a whole they simply don’t work together effectively.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. This lack of organizational cohesion can greatly increase the risk to your project.
- Technical complexity. Some applications are more complex than others. It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch, but not so easy if you’re working with existing legacy systems and legacy data sources which are less than perfect. It’s straightforward to build a system using a single platform, not so easy if you’re building a system running on several platforms or built using several disparate technologies. Sometimes the nature of the problem that your team is trying to address is very complex in its own right.
Each factor has a range of complexities, and each team will have a different combination and therefore will need a process, team structure, and tooling environment tailored to meet their unique situation. Further reading:
Modified by ScottAmbler
A fair question to ask is why should your organization consider adopting the Disciplined Agile Delivery (DAD) process framework. I believe that there are several clear benefits to doing so:
DAD shows how agile techniques fit together. DAD is a hybrid that adopts strategies from a variety of sources, including Scrum, Extreme Programming (XP), Agile Modeling, Kanban, Outside In Development (OID) and many more. More importantly DAD's process-goal driven approach shows how this all fits together, providing advice for when (and when not) to use each technique and the advantages and disadvantages of doing so. In doing so DAD enables you to streamline your efforts to tailor agile to reflect the context of the situation you find yourself in. Furthermore, it provides this advice in the context of a full agile delivery lifecycle, explicitly showing how to initiate a project, construct a solution, and then deploy into production. Instead of starting with a small agile method such as Scrum and doing all the work to figure out how to tailor ideas from other methods to actually make it work, why not start with a framework that's already done all that work for you?
DAD isn't prescriptive. DAD is far less prescriptive than other agile methods. For example, where Scrum prescribes a single strategy for managing changing requirements, a strategy called a Product Backlog, DAD suggests several strategies and provides advice for choosing the right one. Where other agile methods define a single lifecycle, DAD instead describes several lifecycles (an agile Scrum-based one, a lean lifecycle, and a continuous delivery lifecycle to name just three) and once again describes how to choose the right one for your situation. Your agile team is in a unique situation, and as a result needs a flexible process framework that provides coherent, easy-to-follow tailoring advice. Isn't it better to adopt strategies that reflect the context that you actually face?
DAD explicitly addresses architecture. Even after a decade of agile software development it still seems that the topic of how agile teams address architecture is a mystery for many people. As a result DAD builds agile architecture strategies right in, starting with initial architecture envisioning, to proving the architecture with working code, to evolutionary design strategies during construction.
DAD explicitly addresses DevOps. DevOps is the art of combining development and operations approaches in such a way as to streamline your overall efforts. DAD "bakes in" DevOps through explicit support for common DevOps practices as well as its robust stakeholder definition which explicitly includes operations and support people.
DAD explicitly addresses governance. Although governance is often considered a dirty word within some agile circles, the reality is that software development teams can and should be governed. Sadly, many agile teams have traditional governance strategies inflicted upon them, strategies which invariably increase schedule, cost and risk on the project. But is doesn't have to be this way. It is possible, and very desirable to adopt agile goverance strategies, strategies which are built right into the DAD framework.
DAD explicitly addresses many other important development activities. Architecture, DevOps, and governance are just the tip of the iceberg. DAD also shows how critical activities such as analysis, design, testing, quality, technical writing, and many more are addressed in an agile and streamlined manner throughout the delivery lifecycle. As described earlier, this is done in a non-prescriptive and tailorable manner, thereby removing a lot of the mystery regarding how this agile stuff all fits together into a coherent whole.
DAD is solution focused, not software focused. Although the rhetoric around "potentially shippable software" resonates well with developers it observably and empirically misses the mark. DAD promotes the more robust idea of "potentially consumable solutions". Yes, shipping is nice but shipping something that people actually want to use/buy, something that is consumable, is much nicer. Yes, software is part of the equation but that software runs on hardware, we often also need to develop supporting documentation, we often evolve the business process, and even evolve the organization structure around the usage of the system. In other words, we're really producing solutions, not just software. Isn't it better to adopt rhetoric that actually reflects what we're doing in practice?
DAD promotes enterprise awareness over team awareness. One of the great benefits of an agile approach to software development is its focus on the team. This can also be a bit of a problem, because a team-focused strategy can result in suboptimal decisions for your overall organization. DAD promotes the idea that disciplined agilists should be enterprise aware, working towards common business and technical goals while leveraging and enhancing the existing infrastructure whenever possible.
DAD provides a foundation from which to scale. The starting point for scaling agile is to understand how agile strategies fit together from project initiation to delivery into production. If you don't know how to succeed with agile in a straightforward situation then it will prove very difficult to do so in an agility @ scale situation. DAD not only provides this tailorable foundation from which to scale agile it also takes a robust view of what it means to scale agile (hint: large or distributed teams are only a start).
DAD provides a basis for enterprise agile. As organizations move towards a true "enterprise agile" approach they often find that they need to adopt either DAD as a foundation or invest a fair bit of effort inventing something similar. They are also starting to adopt strategies from the SAFe framework, or reinventing such, as well as ideas from sources such as Enterprise Unified Process (EUP) (sadly, poorly named in hindsight), ITIL, and even CoBIT. More on this in a future blog posting.
In short, DAD provides a lot of proven advice culled from years of experience applying agile software techniques in enterprise-class environments. Instead of figuring all of this stuff out on your own, why not jump ahead and leverage the hard-won lessons learned from other organizations that have already dealt with the challenges that you're struggling with today?
The primary shortcoming of the DAD framework is it makes it very clear that software development, oops I mean solution delivery, is quite complex in practice. As IT practitioners we inherently know this, but it seems that we need to be reminded of this fact every so often. DAD doesn't provide a simplistic, feel-good strategy that you can learn in a few hours of training. Instead it defines a coherent, tailorable strategy that reflects the realities of enterprise IT.
There is a wealth of information at DAD posted at the Disciplined Agile Delivery (DAD) web site and great discussions occuring on the DAD LinkedIn discussion forum. For those of you interested in agile certification, the Disciplined Agile Consortium site will prove valuable too, in particular the list of upcoming DAD workshops provided by several IBM partners. And of course the book Disciplined Agile Delivery: A Practitioner's Guide to Agile Software Delivery in the Enterprise (IBM Press, 2012) written by Mark Lines and myself is a very good read.
Modified by ScottAmbler
In 2009 I wrote a white paper entitled The Agile Scaling Model (ASM): Adapting Agile Methods for Complex Environments for IBM Rational. Apparently it's been taken down, which I think is unfortunate as it contains some interesting ideas that your organization may be able to benefit from.
The original white paper addresses several key issues:
It provides and explains a definition for disciplined agile delivery. A more up to date discussion of DAD can be found on the Disciplined Agile Delivery site.
It describes criteria to determine is a team is agile. I've explored this issue via several surveys over the years since then. See the January 2013 How Agile Are You? results.
It describes the ASM, which distinguishes between core agile development techniques, disciplined agile delivery strategies, and agility at scale. The ASM was superceded in early 2013 by the Software Development Context Framework (SDCF). Perhaps this is why the ASM paper was taken down??
It overviews the eight scaling factors which a delivery team may face, scaling factors which motivate changes in the process that you will follow and the tools that you will adopt. The SDCF provides my recent thoughts regarding scaling factors. I have also run various IT Surveys over the years exploring how well organizations fare at scaling agile.
It describes the implications of the ASM. My blog posting Scaling Agile: Start with a Disciplined Foundation covers this very well.
It argues that you should strive to be as agile as you need to be, and that will be driven by the situation that you face.
The popular Agile literature can often seam naive when it comes to how Agilists work with project stakeholders:- Extreme Programming (XP) has a practice called On-Site Customer where one or more people work closely with your team to provide information and to make decisions in a timely manner.- Scrum has the role of Product Owner who is the one single person that the development team goes to for decisions about requirements. - Agile Modeling (AM) has the practice of Active Stakeholder Participation which extends On-Site Customer to get the stakeholder(s) actively involved with the modeling effort through the use of inclusive tools and techniques.
These are great strategies for small, co-located teams doing straightforward development, but they quickly fall apart at scale. This occurs for several reasons:1. Stakeholders are a diverse group. Your stakeholders include end users, business management, project funders, enterprise architects, operations staff, support staff, other system development teams, and many others. Different people have different, and often contradictory, requirements and they certainly have different priorities. It's questionable whether a single person, or a handful of persons, can adequately represent this diverse group.2. One person becomes a bottleneck. Even with a small co-located team this is a problem, let alone one that is geographically distributed or one that is very large. There's no way that a single person can be available 24/7 in a responsive manner to support distributed teams.3. It's a difficult role. The Product Owner/Customer (POC) is responsible for representing the business to the development team. They're making important decisions on a regular basis, decisions which they'll be held accountable for.4. One person becomes a serious project risk. Not only is it questionable whether a single person can fairly represent all stakeholders, even if they could what happens if you lose that person? They effectively become a single point of failure for your team.
To scale this role, consider the following strategies:1. Recognize the true scope of the POC role. Not only are they stakeholder proxies they also are a development team representative to the stakeholder community as a whole. As stakeholder proxies they'll make decisions and prioritize the work, they'll run requirements elicitation sessions, they'll negotiate priorities, and they'll put the development team in contact with stakeholders who have expertise in specific aspects of the domain. As team representatives they'll often demo the current version of the system to other stakeholders, communicate the status of the project to people, and respond to various requests for information from the stakeholders.2. Have multiple people in it. A single POC works well for small, co-located teams developing simple software. At scale you'll soon discover that you need multiple people in this role so that they don't become a bottleneck. For distributed teams it's common to see each subteam have one or more POCs who are managed by a primary/chief POC. The primary POC typically works on the coordinating team with the chief architect (I'll talk about this role in a future blog posting) and the program manager (also a topic for a future blog posting).3. Train them in business analysis skills. The person(s) in the POC role need good business analysis skills. If fact, it's common for people who were formerly BAs for traditional teams to step into the POC role, particularly with BAs who originally come from the business side of your organization. This strategy has its advantages and disadvantages. As a BA they've likely got solid business knowledge but their instincts may motivate them to take a documentation-driven approach to providing information to the development team instead of a collaboration-based approach. Be careful.4. Consider the full system development lifecycle. There's far more to the POC role than supporting the development team during Construction iterations. During "Iteration 0", the Inception phase for an Agile RUP project or the warm-up phase for an Eclipse Way project, the POC(s) will often lead the initial requirements envisioning efforts. The product backlog, or better yet your work item list, needs to come from somewhere after all. During the release iteration(s), the Transition phase for RUP or the End-Game phase for Eclipse Way, the POC(s) will focus on communicating the upcoming release to the stakeholder community, will be actively involved with any final user acceptance testing (UAT), and may even be involved with training end users.
In my January 2008 column in Dr Dobb's Journal, posted at http://www.ddj.com/architect/204801134 , I provide detailed advice about how to scale the way that you work with stakeholders on Agile projects by applying the practices of Agile Model Driven Development (AMDD). There's no magic solution, you just need to choose to organize yourself effectively. The good news is that you can easily work with stakeholders at scale.[Read More
It's customary to start a blog by describing the vision for it. Although this vision will undoubtedly evolve over time, it's always good to put a stake in the ground to get things started. Agile software development is clearly taking off and in my opinion is becoming the dominant development paradigm. Furthermore it appears that Agile approaches enjoy a higher success rate, providing better value for your IT investment, than do traditional approaches. Although organizations are succeeding at simpler projects with agile, many are struggling when applying Agile in more complex situations. They're finding that the "Agile rhetoric" doesn't always live up to its promises once you move into these complex situations. My goal with this blog is to share strategies for applying Agile techniques at scale.
When applying Agile strategies at scale you are likely to run into one or more of the following complexity factors:1. Geographical distribution. Is your team, including stakeholders, in different locations? Even being in different cubicles within the same building can erect barriers to communication, let alone being in different cities or even on different continents.2. Regulatory compliance. Regulations, including the Sarbanes-Oxley act, BASEL-II, and FDA statutes, to name a few, can increase the documentation and process burden on your projects. Complying to these regulations while still remaining as agile as possible can be a challenge.3. Entrenched policies, people, and processes. Most agile teams need to work within the scope of a larger organization, and that larger organization isn't always perfectly agile. Hopefully that will change in time, but we still need to get the job done right now. Your existing culture and organization can really hinder your ability to scale agile approaches, then a few "simple" changes can really help your efforts.4. Legacy systems. Although the politically correct term would be "proven assets" the reality is that it can be very difficult to leverage existing code and data sources due to quality problems. The code may not be well written, documented, or even have tests in place, yet that doesn't mean that your agile team should rewrite everything from scratch. Some legacy data sources are questionable at best, or the owners of those data sources difficult to work with, yet that doesn't given an agile team license to create yet another database.5. Organizational distribution. When your teams are made up of people working for different divisions, or if you have people from different companies (such as contractors, partners, or consultants), then your management complexity rises.6. Degree of governance. If you have one or more IT projects then you have an IT governance process in place. How formal it is, how explicit it is, and how effective it is will be up to you. IBM has been doing a lot of work in this topic over the past few years, and just recently Per Kroll and I have done some work around Lean Governance strategies. 7. Team size. Large teams will be organized differently than small teams, and they'll work differently too.8. System complexity. The more complex the system the greater the need for a viable architectural strategy. An interesting feature of the Rational Unified Process (RUP) is that it's Elaboration phase's primary goal is to prove the architecture via the creation of an end-to-end, working skeleton of the system. This risk-reduction technique is clearly a concept which Extreme Programming (XP) and Scrum teams can clearly benefit from.
It is definitely possible to scale Agile software development to meet the real-world complexities faced by modern organizations. Based on my experiences, I believe that over the next few years we'll discover that Agile scales better than traditional approaches. Many people have already discovered this, but as an industry I believe that there isn't yet sufficient evidence to state this as more than opinion. My goal with this blog is to provide advice for scaling Agile so as to increase your chances of success.
So, it looks like I have my work cut out for me. My strategy will be to address common questions which I get when working with customers and with internal IBM development teams. I have the privilege to work with a variety of software development teams worldwide, helping them to become more agile. They're all struggling with the same basic issues although don't recognize it because they're too focused on their own situation. So hopefully I'll be able to spread the word about what's actually working in practice.
I hope that you stay tuned.
- Scott[Read More
- Does the team regularly produce value for their stakeholders?
- Does the team validate its own work to the best of its ability?
- Are stakeholders actively involved?
- Is the team self organizing?
- Does the team strive to improve their process?
Some interesting results include:
94% of teams which are claiming to be agile are providing value to stakeholders on a regular basis.
87% of teams which are claiming to be agile are validating their own work.
95% of teams which are claiming to be agile are working closely with stakeholders.
56% of teams which are claiming to be agile are self organizing.
88% of teams which are claiming to be agile are improving the process that they follow throughout the lifecycle.
Teams which are claiming to be agile often aren't. 53% of "agile teams" meet the five criteria, although 72% meet all but the self-organization criteria.
Teams which are moving towards agile but aren't there yet are reasonably close. 39% of those teams meet all five criteria and 63% meet all but self-organization.
I believe that there are several important implications:
- Whenever someone claims to be on an agile team you may want to explore that claim a bit deeper.
The low level of self organization may be an indicator of cultural challenges with organizations in that their project managers aren't giving up sufficient control. The Agility at Scale survey
in November 2009 found that 59% of respondents who indicated that their organization hadn't adopted agile techniques yet that a rigid culture was hampering their efforts. The IT Governance and Project Management
survey in July 2009 discovered that "questionable behaviors", many of which were ethically questionable (I'm being polite), were far too common within IT project management.
Although "agile teams" may not be as agile as they claim, they're still doing better than traditional V-model teams, as revealed (again) by the 2010 IT Project Success
If there was some sort of consensus within the agile community as to the criteria for determining whether a team is agile, I highly suspect that the agileness ratings would increase over time. What gets measured often improves.
However, how agile you are isn't anywhere near as important as getting better at what you're doing. So perhaps I'm barking up the wrong tree on this issue. ;-)
One of the scaling factors
called out in the Agile Scaling Model (ASM)
is “regulatory compliance”. This name is a bit of a misnomer because this scaling factor really addresses two issues: complying to regulations imposed upon you from external sources and choosing to adhere to internal regulations willingly adopted by your organization. It is relatively common for agile teams to find themselves in such situations. For example, in the 2009 Agile Practices Survey
one third of respondents said that they were applying agile on projects where one or more industry regulations applied.
First let’s consider external regulatory compliance. In these situations you may face the need to undergo an audit by an external regulatory body with consequences for non-compliance ranging from anywhere to a warning to a fine or even to legal action. Sometimes even a warning may be a grave thing. A few years ago I was working with a pharmaceutical company which had discovered that a warning from the FDA for non-compliance with their CFR 21 Part 11 regulation, when reported in major newspapers, resulted on average in a half-billion dollar loss to their market capitalization as the result of a dip in their stock price. There are financial regulations such as Sarbanes-Oxley and Basel II, informational regulations such as HIPAA which focuses on health information privacy, technical regulations such as ISO 27002 for security practices, and even life-critical regulations such as some of the FDA regulations.
External regulations are typically managed by a government organization or industry watchdog will range in complexity and can have a myriad of effects on project teams. For example, you may need to be able to prove that you had a documented process and that you followed it appropriately; you may need to produce extra artifacts, or more detailed artifacts, than you normally would; you may need to add extra features to your solution, such as tracking financial information, that you wouldn’t have normally implemented; you may need to produce specific reports to be submitted to the regulatory body; or you may even need to submit your team to audits, sometimes scheduled and sometimes not, to ensure regulatory compliance. Interestingly, even though many of those requirements go against the agile grain, the 2009 Agility at Scale Survey
found that organizations were successfully applying agile techniques while still conforming to external regulations. So yes, it is possible to scale your agile strategy to address regulatory compliance.
Second, let’s consider compliance to internally adopted, or sometimes even developed, “regulations” which you will be potentially evaluated/appraised against. Perfect examples of these are process improvement frameworks such as CMMI and ISO 900x. Similar to external regulations, the 2009 Agility at Scale Survey
found that some agile teams are succeeding in situations where they have chosen to adopt such frameworks. It’s important to note that frameworks such as CMMI aren’t primarily about ensuring the compliance of development teams to a standard process, regardless of what CMMI detractors may claim, but instead about process improvement. Process improvement at the IT department (or beyond) is an enterprise discipline issue from the point of view of ASM, implying that frameworks such as CMMI affect more than one scaling factor.
When you find yourself in a regulatory situation, whether those regulations are imposed or willingly adopted, the best advice that I can give is to read the regulations and develop a strategy to conform to them in the most agile manner possible. If you let bureaucrats interpret the regulations you’ll likely end up with a bureaucratic strategy, but if you instead choose to take a pragmatic approach you will very likely end up with a very practical strategy. Part of that strategy is to treat the regulatory representative(s) within your organization as important stakeholders whom you interact with regularly throughout the project.
Recently I visited a customer who had adopted Scrum. They were a few sprints, what Scrum calls iterations, into the project and were running into some difficulties. Although I was primarily brought in to educate senior management on disciplined agile software development, I was also asked to sit in on the team’s daily stand-up meeting so that I could hopefully provide some suggestions as to how to address the problems they were running into.
Their work area was fairly typical. They had some whiteboards which they were using for project planning and tracking, with sticky notes to indicate what work had been taken on by each team member. The current status of the task (not yet started, in progress, and completed) was indicated by putting each sticky note in a corresponding column for the status and corresponding column for the team member. This allowed everyone on the team to easily share their status and to see the status of everyone else. On the sides were sketches of the architecture as well as some business oriented models. In addition to Scrum the team had adopted several practices from Agile Modeling, in this case they had done some initial requirements envisioning
and architecture envisioning
, as well as practices from Extreme Programming (XP) for construction. In short, they had followed a fairly common strategy of combining practices from various agile methods.
This would have worked perfectly fine if they had tailored the practices to reflect the situation that they were in, but instead they adopted them "straight out of the book". First, the team was distributed, with most of the team in the location that I was visiting but some people located in two other distant cities. Therein was the source of most of their problems. The people at the other two locations weren’t getting much value out of the daily stand-up meetings, even though they would dial in, because they couldn’t see the project status information. Although people at this location were trying their best to represent these distant people in the daily stand-ups it wasn’t working well – their status information wasn’t being kept up to date and for some people it was a bit of mystery as to what they were actually working on at all.
This team also had 30 people in it, which isn’t a big deal although it can stretch the limits of the simple modeling and planning tools (in this case paper and whiteboards) that they were using. Because the team was larger they were investing a fair bit of time creating burn down charts at both the iteration/sprint and project levels. One of the unfortunate implications of using manual tools for project management is that any associated metric/status reporting in turn becomes manual as well. Considering how the agile community is so concerned with working efficiently, I find it comical that we have a tendency to overlook our own potentially unnecessary bureaucracy such as this.
The problem was that the team was applying strategies, in this case using sticky notes and whiteboards to capture the detailed iteration plan, applying similar strategies to capture key models, and were verbally relaying of status information between sub-teams. There are perfectly fine strategies for smaller co-located teams, but not so good for large or distributed teams. The solution was to recognize that they were in an Agility@Scale situation and needed to tailor their approach to reflect this fact. In this case they needed to forgo some of the manual tools and instead use electronic tooling such as Rational Team Concert (RTC) to share information across disparate locations, in particular the work assignment and corresponding status information. RTC also creates common agile reports such as burn-down charts based on the activities of the developers, providing accurate (nearly) real-time information while removing the burden of status reporting. The RTC project dashboard does more than just this, to see an actual example of one visit www.jazz.net
to see the dashboard for the RTC development team itself. You can also see their actual work item list too, a more advanced version of Scrum’s product and sprint backlogs.[Read More
I've been getting a lot of questions lately about applying the acceleration metric
in practice. So, here's some answers to frequently asked questions:
1. How do I monetize acceleration?
This is fairly straightforward to do. For example, assume your acceleration is 0.007 (0.7%), there are five people on the team, your annual burdened cost per person is $150,000, and you have two week iterations. All these numbers are made up, but you know how to calculate acceleration now and IT management had darn well better know the average burdened cost (salary plus overhead) of their staff. So, per iteration the average burdened cost per person must be $150,000/26 = $5,770. Productivity improvement per iteration for this team must be $5,770 * 5 * .007 = $202. If the acceleration stayed constant at 0.7% the overall productivity improvement for the year would be (1.007)^26 (assuming the team works all 52 weeks of the year) which would be 1.198 or 19.8%. This would be a savings of $148,500 (pretty much the equivalent of one new person). Of course a 20% productivity increase over an entire year is a really aggressive improvement, regardless of some of the claims made by the agile snake oil salesman out there, although at 10-15% increase is a reasonable expectation. What I'd really want to do is calculate the acceleration for the year by comparing the velocity from the beginning of the year to the end of the year (in Western cultures I'd want to avoid comparing iterations near to the holidays). So, if the team velocity the first week of February 2008 was 20 points, now the same team's velocity the first week of February 2009 was 23 points, that's an acceleration of (23-20)/20 = 15% over a one year period, for a savings of $112,500.
2. Is acceleration really unitless?
For the sake of comparison it is. The "units" are % change in points per iteration, or % change in points per time period depending on the way that you want to look at it. Because it's a percentage I can easily monetize it, as you see above, and use it as a basis of comparison.
3. How do I convince teams to share their data?
This can be difficult. Because acceleration is easy to calculate for agile teams, and because it's easy to use to compare teams (my team has .7% acceleration whereas other teams down the hall from mine have accelerations of .3% and -.2% of teams), people are concerned that this metric will be used against them. OK, to be fair, my team might be OK with this. ;-) Seriously though, this is a valid fear that will only be addressed by an effective governance program
based on enablement, collaboration, and trust instead of the traditional command-and-control approach. Management's track record regarding how they've used measurements in the past, and how they've governed in general, have a great effect on people's willingness to trust them with new metrics such as acceleration. The implication is that you need to build up trust, something that could take years if it's possible at all.
4. Why does this work for agile teams?
Agile teams are self organizing, and an implication of that is that they will be held accountable for their estimates. Because of this accountability, and because velocity is a vital input into their planning and estimation efforts, agile teams are motivated to calculate their velocity accurately and to track it over time. Because they're eager to get their velocity right, and because acceleration is based on velocity, there's an exceptionally good chance that it's accurate.
5. What about function points or similar productivity measures?
Function points can be calculated for projects being developed via an agile approach, or other approaches for that matter, but it's a very expensive endeavor compared to calculating acceleration (which is essentially free) and likely will be seen as a bureaucratic overhead by the development team. My rule of thumb is that if you're not being explicitly paid to count function points (for example the US DoD will often pay contracting companies to create estimates based on function point counts) then I wouldn't bother with them.
6. What about calculating acceleration for iterative project teams?
Iterative project teams, perhaps following Rational Unified Process (RUP)
, can choose to calculate and track their velocity and thereby their acceleration. The key is to allow the team to be self organizing and accountable for their estimates, which in turn motivates them to get their velocity right just like agile teams (RUP can be as agile as you want to make it, don't let anyone tell you differently).
7. What about calculating acceleration for traditional project teams?
In theory this should work, in practice it is incredibly unlikely. Traditional teams don't work in iterations where working software is produced on a regular basis, they're typically not self organizing, and therefore there really isn't any motivate to calculate velocity (even if they do, there is little motivation to get it right). Without knowing the velocity you can't calculate acceleration. If you can't trust the velocity estimate, and I certainly wouldn't trust a traditional team's velocity estimate, then you can't trust your acceleration calculation. So, my fall back position to calculate productivity improvement would be to do something like function point counting (which is expensive and difficult to compare between teams due to different fudge factors used by different FP counters) and then looking at change in FPs delivered over time.
8. How can I apply this across a department?
It is fairly straightforward to roll up the acceleration of project teams into an overall acceleration measure for a portfolio of teams simply by taking a weighted average based on team size. However, this is only applicable to teams that are in a position to report an accurate acceleration (the agile and iterative teams) and of course are willing to do so.
9. What does a negative acceleration tell me?
If the acceleration is negative then productivity on the team is going down, likely an indicator of quality and/or team work problems. However, you don't want to manage by the numbers so you should talk to the team to see what's actually going on.
10. What does a zero acceleration tell me?
This is an indication that the team's productivity is not increasing, and that perhaps they should consider doing retrospectives at the end of each iteration and then acting on the results from those retrospectives. Better yet they can "dial up" their process improvement efforts by adopting something along the lines of IBM Rational Self Check
Modified by ScottAmbler
Over the past few months I've had several people ask me whether it makes sense to offshore agile testing, and more importantly when it makes sense to do so. So I thought I would share my thoughts on the subject:
Focus on whole team testing. The basic strategy is that agile teams should strive to do as much, if not all, of the testing themselves. We call this whole team testing. For organizations new to agile this can be daunting because they may be organized in such a way that programmers write code and then hand it over to testers for validation and verification. The implication is that organizations will need to invest in their staff so that the programmers become more well rounded and pick up testing skills (we refer this as moving from being a specialist to a generalizing specialist).
Offshore entire development teams. A common strategy for organizing geographically distributed agile teams is to have whole teams at each location. For example, if your larger team is spread across three locations - Toronto, London, and Bangalore - then each team is responsible for implementing end to end functionality. With a component-based approach the Toronto team should be fully responsible for one or more subsystems, the London team responsible for one or more subsystems, and the Bangalore team responsible for one or more subsystems. With a feature-team approach the Toronto team would implement all of the functionality, end-to-end, for a feature regardless of which subsystems that functionality affects. Agile teams typically aren't organized by job function (e.g. analysis is done in London, design and coding in Toronto, testing in Bangalore) due to the overhead of handoffs between sites, the increased risk of miscommunication due to less effective ways of communicating information, and the increased complexity of managing the work.
Adopt independent testing at scale. You may choose, or be forced to have, an independent test team that focuses on some of the more complex forms of testing. The general idea is that this team works in parallel to other subteams and tests their working builds on a regular basis. Having said that, the vast majority of the testing effort should still be done in a whole team fashion. If your team is experiencing agile scaling factors such as domain complexity or technical complexity then you may find that it makes economic sense to have an independent test team focus on forms of testing that are difficult for the subteams to address, in particular pre-production system integration testing. If your team is in a regulatory domain where independent testing is required, then you're better off to "shift left" this effort with an independent test team to reduce both cost and risk.
Offshore independent testing carefully. I would offshore independent testing only to organizations that I have a very good, long-term relationship with that have proven that they can work in a disciplined agile manner. I would also want to ensure that they have actual experience with agile independent testing AND are staffing the team with people that have that experience. A clear sign that they don't understand what is required is if the independent testing team is asking for a detailed requirements specification, an indication that they're planning on doing confirmatory testing which is better suited for whole team testing. Furthermore, I would only do this if I don't have adequate staff to do so myself AND do not have time to build up my own independent test team.
I suspect that you're going to find yourself in serious trouble if:
You do not have successful experiences with agile delivery in simpler (e.g. non-offshoring) situations first. Walk before you try to run.
You think you can save money by having agile programming done in one location and agile testing in another (the coordination costs are going to be much larger than you think)
You're offshoring testing because you're new to agile (in this situation you don't have the experience to organize let alone govern the offshored activities)
You work with a service provider where you don't have a proven track record with them when it comes to agile development (a proven track record with traditional approaches is a good start but still very risky)
In short, it can make sense to offshore agile testing in a very narrow range of situations. Be very careful.
Modified by ScottAmbler
On April 25, 2013 I gave a webcast for the Global Rational User Community entitled Disciplined Agile Delivery: Going beyond Scrum . During the webcast a large number of questions were asked but unfortunately I couldn’t get to all of them. So I’ve taken the opportunity to write up the answers in this blog posting.
Fequently asked questions. Many of the questions are addressed in the DAD FAQ.
DAD elevator pitch - I will be starting work in a couple of weeks for a company that has just started its Agile journey this year by implementing Scrum. What would Scott put in an elevator chat as to why they should be moving towards DAD. The Disciplined Agile Delivery (DAD) decision process framework is a people-first, learning-oriented hybrid agile approach to IT solution delivery. It has a risk-value delivery lifecycle, is goal-driven, is enterprise aware, and is scalable. There are clearly some interesting aspects to the DAD framework. DAD is a hybrid approach which extends Scrum with proven strategies from Agile Modeling (AM), Extreme Programming (XP), Unified Process (UP), Kanban, Lean Software Development, Outside In Development (OID) and several other methods. DAD is a non-proprietary, freely available framework. DAD extends the construction-focused lifecycle of Scrum to address the full, end-to-end delivery lifecycle from project initiation all the way to delivering the solution to its end users. It also supports lean and continuous delivery versions of the lifecycle: unlike other agile methods, DAD doesn’t prescribe a single lifecycle because it recognizes that one process size does not fit all. DAD includes advice about the technical practices such as those from Extreme Programming (XP) as well as the modeling, documentation, and governance strategies missing from both Scrum and XP. But, instead of the prescriptive approach seen in other agile methods, including Scrum, the DAD framework takes a goals-driven approach. In doing so DAD provides contextual advice regarding viable alternatives and their trade-offs, enabling you to tailor DAD to effectively address the situation in which you find yourself. By describing what works, what doesn’t work, and more importantly why, DAD helps you to increase your chance of adopting strategies that will work for you. The article Introduction to Disciplined Agile Delivery provides a more detailed description.
The book: Could you please repeat the name of the book that Scott is talking about? The book is Disciplined Agile Delivery: A Practitioner’s Guide to Agile Software Delivery in the Enterprise published by IBM Press, June 2012. The Disciplined Agile Delivery (DAD) website and the Disciplined Agile Consortium website are also good DAD resources.
The Surveys: Where is the data published about geographic distribution and effectiveness? All of my survey data, the original questions as asked, and my analysis can be downloaded free of charge from my IT Surveys page. If you ever see a request from me to fill out a survey, please take a few minutes and do so. I think you'll agree that my surveys page is in fact a very useful resource, so please contribute when you can.
Project success criteria: Where would a goal of defining success criteria fall? In the DAD book we describe how the success criteria for the project should be initially identified during Inception. Success criteria, like other things, could evolve throughout the project. You might find the IT Process Success Surveys to be of interest as several of them explored what success criteria projects actually have. Interestingly, its rarely “on time, on budget, to specification”.
Transitioning to DAD: How would you typically phase a DAD implementation, let's say in a project pilot where they haven't been exposed yet to Agile? Same question, any variance if the development team has already started Scrum? This is a fairly complex question to answer. The short story is that you need to invest some time to understand what your strengths and weaknesses are so that you can identify what you need to focus on. You will then likely need to pilot strategies/techniques which are new to your organization before rolling them out widely. You may also need to invest in training and coaching/mentoring depending on your needs. My company, Scott Ambler + Associates, offers these sorts of services and more for organizations interesting in adopting disciplined agile strategies.
Skills: I am aware that ideally developer should also be able to test but in reality theses are usually separate roles. Is it in line with your beliefs\suggestions? Many organizations that are new to agile still have roles that reflect their existing strategy. Non-agile approaches often have people in specific roles such as programmer, tester, designer, and so on. In DAD we promote a different set of agile roles that reflect agile thinking. The implication is that you’re going to have to help individuals transition over to the new way of thinking, something we cover in Chapter 4 of the DAD book. You might also find Mark Lines' blog, No role in DAD for an Analyst? to provide some insights into issues surrounding the transition from traditional to agile roles.
Teaming: What happens with the Product Owner and the Architecture Owner don’t Agree? See my blog What Happens When People Don’t Agree
Skillsets: Different people of the team have different skills, experience, and time horizons. We can't all be generalists, can we? There are several agile roles in DAD, each of which have different rights, responsibilities, and skillsets. So we’re not promoting the idea that everyone have the same skillset. However, we do promote the philosophy that people should strive to be T-skilled generalizing specialists so as to improve their productivity.
Teaming: What are your thoughts on team cohesion? Teams will gel over time. Being co-located helps. Having people who are dedicated 100% to the team helps. Building a team of people who want to be there helps. Self organization helps.
Tool support: Is there an RMC plug-in for DAD + Is there any software behind DAD... or some software that supports it... such as Jazz (RTC) for Agile/Scrum? Yes, IBM Rational does in fact have an RMC plug in for DAD. There is also a template for Microsoft TFS from RDA Corp, Software Development Expert’s Practices Advisor supports DAD comprehensively, and I’m currently working with MethodPark to do so too. Stay tuned to the Disciplined Agile Delivery website for information about tool support.
Governance: Regarding enterprise governance and enterprise IT, how do you start taking a culture that imposes common-process, common-tools, central (often outsourced) IT services, and heavyweight stage/gate across all organizations, and get that evolving toward a (still enterprise aware) lean/agile approach? This is a hard one. I’m often called into organizations to help with this very issue. The challenge is that you need to have a deep understanding of IT governance techniques as well as how to govern agile teams. Governance is something we discussed in detail in the DAD book as well as on the DAD site, see Adopting Agile Governance Requires Discipline.
Executable specifications: TDD was mentioned, can you comment on Behavior Driven Development (BDD) and any impact on this lifecycle? BDD is a slight nuance to acceptance test-driven development (ATDD). BDD/ATDD and TDD are both potential practices that you might choose to follow on a DAD team. I’ve written a fair bit about agile testing and quality strategies and about TDD in detail.
Architecture: When does the first version of architecture gets established and what would require to establish it? You typically start thinking about architecture early in a DAD project during Inception following a practice called architecture envisioning. I’ve also written a fair bit about agile architecture techniques and the potential misconceptions about agile architecture that you may find interesting.
Travel plans: Will you be coming to South Africa at some point? The good news is that Mark Lines, my co-author, will be in South Africa the week of May 20 in Joburg and the following week in Capetown. Contact us for details. I hope to be visiting SA later this year but exact dates haven’t been set yet. So, please stay tuned on Twitter at @scottwambler for further announcements.
Other travel plans: If you'd like me to speak at a local event, including corporate conferences or training events, please contact me.
Rolf Nelson recently recorded a short (5 min) podcast about IBM Rational
(RTC). RTC is a complete agile collaborative development
environment providing agile planning, source code management, work item
management, build management, and project health, along with integrated
reporting and process support. I've worked with RTC for a couple of years now and have been truly impressed with it. What should be of interest to many people is the Express-C version which is a free, fully-featured, 10-license version of RTC which can be easily downloaded from www.jazz.net
Modified by ScottAmbler
For several years now I've written various articles and newsletters on the topics of estimating and funding strategies for software development projects, and in particular for agile software development projects. Whenever I talk to people about agile software development, or coach them in how to succeed at it, some of the very first questions that I'll be asked, particularly by anyone in a management role, is how to fund agile software development projects. Apparently a lot of people think that you can only apply agile strategies on small, straightforward projects where it makes sense to do a time and materials (T&M) approach. In fact you can apply agile strategies in a much greater range of situations, as the various surveys
that myself and others are showing time and again. My goal with this blog posting is to summarize the various strategies for, and issues surrounding, the funding of agile software development projects.
There are three basic strategies for funding projects, although several variations
clearly exist. These strategies are:
- "Fixed price". At the beginning of the project develop, and then commit to, an initial estimate based on your up-front requirements and architecture modeling efforts. Hopefully this estimate is given as a range, studies have shown that up-front estimating techniques such as COCOMO II or function points are accurate within +/- 30% most of the time although my July 2009 State of the IT Union survey found that on average organizations are shooting for +/- 11% (their actuals come in at +/- 19% on average, but only after doing things such as dropping scope, changing the estimate, or changing the schedule). Fixed-price funding strategies are very risky in practice because they promote poor behavior on the part of development teams to overcome the risks foisted upon them as the result of this poor business decision. It is possible to do agile on a fixed budget but I really wouldn't recommend it (nor would I recommend it for traditional projects). If you're forced to take a fixed-price approach, and many teams are because the business hopes to reduce their financial risk via this approach not realizing that it actually increases their risk, then adopt strategies that reduce the risk.
- Stage gate. Estimate and then fund the project for given periods of time. For example, fund the project for a 3-month period then evaluate it's viability, providing funding for another period of time only to the extent that it makes sense. Note that stages don't have to be based on specific time periods, they could instead be based on goals such as to intiate the project, prove the architecture with working code, or to build a portion of the system. Disciplined agile methods such as Open Unified Process have built in stage-gate decision points which enable this sort of strategy. When the estimation technique is pragmatic, the best approaches are to have either the team itself provide an estimate for the next stage or to have an expert provide a good gut feel estimate (or better yet have the expert work with the team to develop the estimate). Complex approaches such as COCOMO II or SLIM are often little more than a process facade covering up the fact that software estimating is more of an art or a science, and prove to be costly and time consuming in practice.
- Time and materials (T&M). With this approach you pay as you go, requiring your management team to actually govern the project effectively. Many organizations believe a T&M strategy to be very risky, which it is when your IT governance strategy isn't very effective. An interesting variation, particularly in a situation where a service provider is doing the development, is an approach where a low rate is paid for their time which covers their basic costs, the cost of materials is paid out directly, and delivery bonuses are paid for working software. This spreads the risk between the customer/stakeholder and the service provider. The service provider has their costs covered but won't make a profit unless they consistently deliver quality software.
The point is that there are several strategies for funding agile software development projects, just like there are several strategies for funding traditional software development projects. My experience is that fixed-price funding strategies are incredibly poor practice which increases the risk of your software development projects dramatically. I recognize how hard it can be to change this desire on the part of our business stakeholders, but have also had success changing their minds. If you choose to perservere, which is a difficult decision to make, you can help your organization's decision makers to adopt more effective strategies. Like you they want to improve the effectiveness of your IT efforts.Further reading: (In recommended order)
- Something's Gotta Give: Argues for a flexibly approach to funding, schedule, and/or scope.
- Agile on a Fixed Budget: Describes in detail how to take a fixed-price approach on agile projects.
- The Dire Consequences of Fixed-Price IT Projects: Describes in detail the questionable behavior exhibited by IT teams when forced to take a fixed-price approach.
- Is Fixed-Price Software Development Unethical?: Questions the entire concept of fixed-price IT projects, overviewing some of the overwhelming evidence against this really poor practice.
- Reducing the Risk of Fixed-Price Projects: Describes viable strategies for addressing some of the problems resulting from the decision of fixed-price projects.
- Strategies for Funding Software Development Projects: Describes several variations on the strategies described above.
- Lies, Great Lies, and Software Development Project Plans: Summarizes some results from the July 2009 State of the IT Union survey which explored issues related to project funding (among many).
I'm happy to announce Rational's Agility at Scale poster which is currently available free of charge from the Rational poster order page
Although I'm obviously biased as I was involved with its creation, the poster includes some really good information about how to scale agile software development practices effectively. It summarizes the scaling factors, such as large teams, distribution, regulatory compliance, application complexity, and so on that you should be concerned with. It also presents a full agile software development lifecycle that goes beyond the construction focused lifecycles of common "agile in the small" processes. It also summarizes the practices of lean development governance, giving you some insight into how to govern your IT environment more effectively.
I think it's a pretty good poster that's worth checking out. It's free, so it's hard to argue with the price. Most importantly, it would look pretty good hanging on your office wall.
Modified by ScottAmbler
I was recently involved in an online discussion about how to calculate the benefits realized by software development teams. As with most online discussions it quickly devolved into camps and the conversation didn’t progress much after that. In this case there was what I would characterize as a traditional project camp and a much smaller agile/lean product camp. Although each camp had interesting points, the important thing for me in the conversation was the wide cultural and experience gap between the people involved in the conversation.
The following diagram summarizes the main viewpoints and the differences between them. The traditional project camp promoted a strategy where the potential return on investment (ROI) for a project would be calculated, a decision would be made to finance the project based (partly) on that ROI, the project would run, the solution delivered into production, and then at some point in the future the actual ROI would be calculated. Everyone was a bit vague on how the actual ROI would be calculated, but they agreed that it could be done although would be driven by the context of the situation. Of course several people pointed out that it rarely works that way. Even if the potential ROI was initially calculated it would likely be based on wishful thinking and it would be incredibly unlikely that the actual ROI would be calculated once the solution was in production. This is because few organizations are actually interested in investing the time to do so and some would even be afraid to do so. Hence the planned and actual versions of the traditional strategy in the diagram.
The agile/lean camp had a very different vision. Instead of investing in upfront ROI calculation, which would have required a fair bit of upfront requirements modelling and architectural modelling to get the information, the idea was that we should instead focus on a single feature or small change. If this change made sense to the stakeholders then it would be implemented, typically on the order of days or weeks instead of months, and put quickly into production. If your application is properly instrumented, which is becoming more and more common given the growing adoption of DevOps strategies, you can easily determine whether the addition of the new feature/change adds real value.
Cultural differences get in your way
The traditional project camp certainly believed in their process. In theory it sounded good, and I’m sure you could make it work, but in practice it was very fragile. The long feedback cycle, potentially months if not years, pretty much doomed the traditional approach to measuring benefits of software development to failure. The initial ROI guesstimate was often a work of fiction and rarely would it be compared to actuals. The cultural belief in bureaucracy motivated the traditional project camp to ignore the obvious challenges with their chosen approach.
The agile/lean camp also believed in their strategy. In theory it works very well, and more and more organizations are clearly pulling this off in practice, but it does require great discipline and investment in your environment. In particular, you need investment in modern development practices such as continuous integration (CI), continuous deployment (CD), and instrumented solutions (all important aspects of a disciplined agile DevOps strategy). These are very good things to do anyway, it just so happens that they have an interesting side effect of making it easy (and inexpensive) to measure the actual benefits of changes to your software-based solutions. The cultural belief in short feedback cycles, in taking a series of smaller steps instead of one large one, and in their ability to automate some potentially complex processes motivated the agile/lean camp to see the traditional camp as hopeless and part of the problem.
Several people in the traditional project camp struggled to understand the agile/lean approach, which is certainly understandable given how different that vision is compared with traditional software development environments. Sadly a few of the traditionalists chose to malign the agile/lean strategy instead of respectfully considering it. They missed an excellent opportunity to learn and potentially improve their game. Similarly the agilists started to tune out, dropping out of the conversation and forgoing the opportunity to help others see their point of view. In short, each camp suffered from cultural challenges that prevented them from coherently discussing how to measure the benefits of software development efforts.
How Should You Measure the Effectiveness of Software Development?
Your measurement strategy should meet the following criteria:
Measurements should be actioned. Both the traditional and agile/lean strategies described above meet this criteria in theory. However, because few organizations appear willing to calculate ROI after deployment as the traditional approach recommends, in practice the traditional strategy rarely meets this criteria. It is important to note that I used the word actioned, not actionable. Key difference.
There must be positive value. The total cost of taking a measure must be less than the total value of the improvement in decision making you gain. I think that the traditional strategy falls down dramatically here, which is likely why most organizations don’t actually follow it in practice. The agile/lean strategy can also fall down WRT this criterion but is much less likely to because the feedback cycle between creating the feature and measuring it is so short (and thus it is easier to identify the change in results to the actual change itself).
The measures must reflect the situation you face. There are many things you can measure that can give you insight into the ROI of your software development efforts. Changes in sales levels, how often given screen or function is invoked, savings incurred from a new way of working, improved timeliness of information (and thereby potentially better decision making), customer retention, customer return rate, and many others. What questions are important to you right now? What measures can help provide insight into those questions? It depends on the situation that you face, there are no hard and fast rules. For a better understanding of complexity factors faced by teams, see The Software Development Context Framework.
The measures should be difficult to game. Once again, traditional falls down here. ROI estimates are notoriously flakey because they require people to make guesses about costs, revenues, time frames, and other issues. The measurements coming out of your instrumented applications are very difficult to game because they’re being generated as the result of doing your day-to-day business.
The strategy must be compatible with your organization. Once again, this is a “it depends” type of situation. Can you imagine trying to convince an agile team to adopt the traditional strategy, or vice versa? Yes, you can choose to improve over time.
Not surprisingly, I put a lot more faith in the agile/lean approach to measuring value. Having said that, I do respect the traditional strategy as there are some situations where it may in fact work. Just not as many as traditional protagonists may believe.
A recurring discussion that I have with experienced agile developers is what it means to take a disciplined agile approach. The conversation usually starts off by some saying "but it already requires discipline to do agile", something that I fully agree with, followed by "therefore 'disciplined agile' is merely a marketing term", something which I don't agree with. The challenge with the "standard" agile discipline is that it is often focused on construction activities within a single project team, clearly important but also clearly not the full picture. There's more to an agile project than construction, and there's more to most IT departments than a single development project. In short, there are many opportunities for IT professionals to up their discipline, and thereby up their effectiveness, opportunities which we make explicit in the Disciplined Agile Delivery (DAD) framework.
Let's explore the many aspects to taking a disciplined agile approach:
You adopt "standard" agile discipline
. Aspects of agile which require discipline
include adopting practices such as test-driven development (TDD), active stakeholder participation, working collaboratively, shortening the feedback cycle
, and many more. These strategies are a great start to becoming disciplined IT professionals.
You take a goal-driven approach
. When we first started working on the DAD framework I didn't want to create yet another prescriptive framework, particularly given Rational's track record with the Rational Unified Process (RUP) framework. Rational has been pilloried for years for the prescriptive nature of RUP, which is unfortunate because there are a lot of great ideas in RUP that agile teams can benefit from, some of which we adopted in DAD and many of which are being actively reinvented with the agile community even as you read this. Furthermore, there are many prescriptive elements of the Scrum method that can get teams in trouble. For example, Scrum prescribes that you hold a daily stand up meeting, often called a Scrum meeting, where everyone should answer three questions. That's a great approach for teams new to agile, but it proves problematic in many situations due to it's prescriptive nature. Do you really need to do this once a day? I've been on teams where we held coordination meetings twice a day and others only once a week. Do you really need to stand up? I've been on geographically distrubited agile teams where many of us were sitting down during coordination calls. Do you really need to answer three questions, two of which are clearly focused on status regardless of claims otherwise? I've been on lean teams where we met around our Kanban board and focused on potential blockers. The answers to these questions depends on the context of the situation you find yourself in. The challenge, at least from the point of view of a process framework, is how do you avoid falling into the trap of being overly prescriptive. The strategy we adopted in DAD is to take a goal-driven approach. The observation is that regardless of the situation you find yourself in there are common goals your team will need to fulfill. For example, at the beginning of a project common goals include developing an initial plan, initially exploring the scope, initially identifying a technical strategy, and securing initial funding (amongst others). Throughout construction you should coordinate your activities, improve the quality of your ecosystem, and produce a potentially consumable solution on a regular basis (more on this below). So, instead of prescribing a daily stand up meeting the DAD framework instead indicates you should coordinate your activities, and gives several options for doing so (one of which is a Scrum meeting). More importantly DAD describes the advantages and disadvantages of your options so that you can make the choice that's best suited for the situation your team finds itself in (see this blog posting
for a detailed example of the types of tables included in the DAD book to help you through such process tailoring decisions). In short, our experience is that it requires discipline to take a goal driven approach
to agile delivery over the prescriptive strategies in other agile processes.
You take a context-driven approach
. There are many tailoring factors, which I describe in the Software Development Context Framework (SDCF)
, which you need to consider when making process, tooling, and team structure decisions. For example, a large team will adopt a different collection of practices and tools than a small team. A geographically distributed team will adopt a different strategy than a team that is co-located. You get the idea. Other tailoring factors include compliance, team culture, organization culture, technical complexity, domain complexity, and project type. It requires discipline to recognize the context of the situation you find yourself in and then act accordingly.
You deliver potentially consumable solutions
. One of the observations that we made early in the development of the DAD framework was that disciplined agile teams produce potentially consumable solutions, not just potentially shippable software. Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. For example, not only are we writing software but we may also be updating the hardware on which it runs, writing supporting documentation, evolving the business processes around the usage of the system, and even evolving the organizational structure of the people working with the system. In other words, disciplined agilists focus on solutions over software
. Furthermore, "potentially shippable" isn't sufficient: not only should it be shippable but it should also be usable and should be something people want to use. In other words it should be consumable (a concept DAD adopted from IBM's Outside In Development
). Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "
such as user interface design and process design to name just two.
The incremental delivery of potentially consumable solutions on an incremental basis requires discipline
to do successfully. DAD teams focus on repeatable results not repeatable processes
You are enterprise aware
. Whether you like it or not, as you adopt agile you will constrained by the organizational ecosystem, and you will need to act accordingly. It takes discipline to work with enterprise professionals such as enterprise architects, data admistrators, portfolio managers, or IT governance people who may not be completely agile yet, and have the patience to help them. It takes discipline to work with your operations and support staff in a DevOps
manner throughout the lifecycle, particularly when they may not be motivated to do so. It requires discipline to accept and potentially enhance existing corporate development conventions (programming guidelines, data guidelines, UI guidelines, ...). It requires discipline to accept that your organization has an existing technology roadmap that you should be leveraging, building out, and in some cases improving as you go. In short, enterprise awareness requires a level of discipline
not typically seen on many agile teams.
You adopt a full delivery lifecycle
. Empirically it is very easy to observe that at the beginning of an agile project there are some activities that you need to perform to initiate the project. Similarly at the end of the project there are activities that you need to perform to release the solution into production or the marketplace. The DAD process framework addresses the effort required for the full delivery effort, including project initiation, construction, and deployment. Our experience is that it requires discipline on the part of IT professionals to include explicit phases
for Inception/Initation, Construction, and Transition/Deployment and more importantly to focus the appropriate amount of effort on each. One danger of explicit phases is that you run the risk of taking what's known as a Water-Scrum-Fall
approach, a term coined by Dave West the person who wrote the forward for the DAD book, where you take an overly heavy/traditional approach to inception and transition in combination with a lighter agile approach to construction. Water-Scrum-Fall occurs because many organizations haven't made a full transition to agile, often because they think it's only applicable to construction. Our experience is that you can be very agile in your approach to inception and transition, experience we've built into the DAD framework. Having said that it clearly requires discipline to keep inception activities short
and similarly it requires discipline to reduce the "transition phase" to an activity
You adopt a wider range of roles
. An interesting side effect of adopting a full delivery lifecycle is that you also need to adopt a more robust set of roles. For example, the Scrum method suggests three roles - Scrum Master, Product Owner, and Team Member - a reflection of the Scrum lifecycle's construction focus. DAD suggests three primary roles - Team Lead, Product Owner, Team Member, Architecture Owner
, and Stakeholder - as well as five secondary roles which may appear at scale.
You embrace agile governance
. Governance establishes chains of responsibility, authority and communication in support of the overall enterprise’s goals and strategy. It also establishes measurements, policies, standards and control mechanisms to enable people to carry out their roles and responsibilities effectively. You do this by balancing risk versus return on investment (ROI), setting in place effective processes and practices, defining the direction and goals for the department, and defining the roles that people play with and within the department. It requires discipline to adopt an agile approach to governance
, and that's something built right into the DAD framework.
The basic idea behind DevOps
is that your development strategy and operations strategy should reflect one another, that you should strive to optimize the whole IT process. This implies that development teams should work closely with your operations staff to deliver new releases smoothly into production and that your operations staff should work closely with development teams to streamline critical production issues.
DevOps has its source in agile software development, and it is an explicit aspect of the Disciplined Agile Delivery (DAD)
process framework. As a result there is a collection of agile development strategies which enable effective DevOps throughout the agile delivery lifecycle. These strategies include:
- Initial requirements envisioning. Disciplined agile teams invest time at the beginning of the project to identify the high-level scope in a light-weight, collaborative manner. This includes common operations requirements such as the need to backup and restore data sources, to instrument the solution so that it can be monitored in real time by operations staff, or to architect the solution in a modular manner to enable easier deployment.
- Initial architecture envisioning. Disciplined agile teams will also identify a viable architectural strategy which reflects the requirements of their stakeholders and your organization’s overall architectural strategy (hence the need to work closely with your enterprise architects and operations staff). One goal is to ensure that the team is building (or buying) a solution which will work well with the existing operational infrastructure and to begin negotiating any infrastructural changes (such as deploying new technologies) early in the project. Another goal is to ensure that operations-oriented requirements are addressed by the architecture from the very start.
- Initial release planning. As part of release planning the disciplined agile team works closely with their operations group to identify potential release windows to aim for, any release blackout periods to avoid, and the need for operations-oriented milestone reviews later in the lifecycle (if appropriate).
- Active stakeholder participation. Disciplined agile teams work closely with their stakeholders, including both operations and support staff, all the way through the lifecycle to ensure that their evolving needs are understood.
- Continuous integration (CI). This is a common technical agile practice where the solution is built/compiled, regression tested, and maybe even run through code analysis tools. CI promotes greater quality which in turn enables easier releases into production.
- Parallel independent testing. For enterprise-class development or at scale, particularly when the domain or technology is very complex or in regulatory environments, disciplined agile team will find they need to support their whole team testing efforts with an independent test team running in parallel to the development team. These testing issues often include validation of non-functional requirements – such as security, performance, and availability concerns – and around production system integration. All of these issues are of clear importance for operations departments.
- Continuous deployment. With this practice you automate the promotion of your working solution between environments. By automating as much of the deployment effort as possible, and by running it often, the development team increases the chance of a successful deployment and thereby reduces the risk to the operations environment. Note that deployment into production is generally not automatic, as this is an important decision to be made by your operations/release manager(s).
- Continuous documentation. With this practice supporting documentation, including operations and support documentation, is evolved throughout the lifecycle in concert with the development of new functionality.
- Production release planning. This is the subset of your release planning efforts which focuses on the activities required to deploy into production.
- Production readiness reviews. There should be at least one review, performed by the person(s) responsible for your operations environment, before the solution is deployed into production. The more critical the system, the more product readiness reviews may be required.
- End-of-lifecycle testing. Minimally you will need to run your full automated regression test suite against your baselined code once construction ends. There may also be manual acceptance reviews or testing to be performed, and any appropriate fixing and retesting required to ensure that the solution is truly ready for production.
There’s more to it though than simply adopting some good practices. Your process must also embrace several supporting philosophies. The Disciplined Agile Delivery (DAD)
process framework not only adopts the practices listed above, and more, but it also promotes several philosophies which enable DevOps:
- Delivery teams should be enterprise aware, that they should work with people such as operations staff and enterprise architects to understand and work towards a common operational infrastructure for your organization.
- Operations and support people should be recognized as key stakeholders of the solution being worked on.
- The delivery team should focus on solutions over software. Software is clearly important, but we will often provide new or upgraded hardware, supporting documentation (including operations and support procedures), change the business/operational processes that stakeholders follow, and even help change the organizational structure in which our stakeholders work.
- Your process should include an explicit governance strategy. Effective governance strategies motivate and enable development teams to leverage and enhance the existing infrastructure, follow existing organizational conventions, and work closely with enterprise teams – all of which help to streamline operations and support of the delivered solutions.
For more detail about this topic, I think that you will find the article I wrote for the December 2011 issue of Cutter IT Journal entitled “Disciplined Agile Delivery and Collaborative DevOps
” to be of value.
In November 2011 Paul Gorans, the Accelerated Solution Delivery (ASD) practice lead in IBM GBS, and I ran an agile adoption survey
. The survey explored a range of issue, including the factors that appear to be associated with the success and failure of agile project teams. Paul wrote up his thoughts in his Agile State of the Art Survey
article on ibm.com and I did the same for Dr Dobb's Journal in Agile Success Factors
. This blog posting summarizes the results of the survey.
Factors which appear to accelerate agile adoption include:
- People are assigned to a single team
- Development teams have easy access to business expertise
- Development teams are organized for agile delivery (not traditional)
- Your organization has an agile support group/community of excellence
- Your organization is explicitly addressing barriers to agility
- There is executive sponsorship for agile
- Agile teams are measured on value creation
- Your organization's IT governance strategy includes an agile path
Factors which appear to decelerate agile adoption include:
- Agile teams are measured using traditional metrics