Modified on by ScottAmbler
The following diagram summarizes a safe and proven strategy for scaling agile delivery strategies at the team level. There are three features of this strategy:
- Basic agile and lean methods. At the base are methods such as Scrum, Extreme Programming (XP), Agile Modeling, Kanban, Agile Data, and many others. These methods are the source of practices, principles, and strategies that are the bricks from which a team will build its process.
- Disciplined Agile Delivery (DAD). Building on mainstream methods is the DAD process decision framework, providing an end-to-end approach for agile software delivery. DAD provides the process mortar required to combine the process bricks, effectively doing the “heavy lifting” to describe how all of these great agile strategies fit together.
- Agility at scale. Teams operating at scale apply DAD in a context driven manner to address the scaling factors that they face. These teams may be large, they may be geographically distributed in some way, they may face compliance constraints, they may be addressing a complex domain or technical environment, or they may be organizationally distributed in some manner. And usually combinations thereof. Without the solid foundation provided by DAD, agility at scale is incredibly difficult to achieve.
To scale agile successfully you must be able to tailor your approach to reflect the context that you face. To do this you must understand what your process and organizational structure options are and what tradeoffs each of those options has. Unless you’re a process expert, this can be challenging. This is where DAD’s process goal strategy comes in. Instead of prescribing a single way to do things, as we see in methods such as Scrum and SAFe, DAD instead captures your options in terms of process goals and guides you through making the decisions that best address the situation that you find yourself in. An example of a process goal diagram, in this case for the Inception phase goal Explore Initial Scope, is shown below.
The critical thing is that with a goal-driven approach it becomes much easier to understand how to scale agile. Depending on the context of the situation that a team finds itself in you will address each goal differently. The strategy for a small, co-located team facing a fairly straightforward situation in a non-regulatory environment works well for that team, the same strategy prescribed to a team in a different situation would put that team at risk of failure. Instead of prescribing a single way of working that is optimized for a specific situation we need to instead allow, and better yet enable, teams to adopt strategies that reflect the context of the situation that they face.
We’ve found that four of the twenty-two process goals seem to take about 80% of the tailoring impact. These goals are:
- Explore Initial Scope. This is sometimes referred to as initially populating the backlog in the Scrum community, but there is far more to it than just doing that. This is an important goal for several reasons. First, your team needs to have at least a high level understanding of what they’re trying to achieve, they just don’t start coding. Second, in the vast majority of organizations IT delivery teams are asked fundamental questions such as what are you trying to achieve, how long will it take, and how much will it cost. Having an understanding of the scope of your effort is important input into answering those sorts of questions.
- Identify Initial Technical Strategy. This is sometimes referred to as initial architecture envisioning or simply initial architecture modeling. You want to address this process goal for several reasons . First, the team should think through, at least at a high level, their architecture so as to identify a viable strategy for moving forward into Construction. A little bit of up-front thinking can increase your effectiveness as a team by getting you going in a good direction early in the lifecycle. It can also help to avoid injection of unnecessary technical debt as a result. Second, the team should strive to identify the existing organizational assets, such as web services, frameworks, or legacy data sources that they can potentially leverage while producing the new solution desired by their stakeholders. By doing this you increase the chance of reuse, thereby avoiding adding technical debt into your organizational ecosystem, and more importantly you reduce the time and cost of delivering a new solution as the result of reuse. You will do this by working with your organization’s enterprise architects, if you have any. This is an aspect of DAD’s philosophy of working in an enterprise aware manner.
- Move Closer to a Deployable Release. This Construction phase process goal is important for three reasons. First, it encompasses the packaging aspects of solution development (other important development aspects are addressed by its sister goal Produce a Potentially Consumable Solution). This includes artifact/asset management options such as version control and configuration management as well as your team’s deployment strategy. Second, it provides deployment planning options, from not planning at all (yikes!) to planning late in the lifecycle to the more DevOps-friendly strategies of continuous planning and active stakeholder participation. Third, this goal covers critical validation and verification (V&V) strategies, many of which push testing and quality assurance “left in the lifecycle” so that they’re performed earlier and thereby reducing the average cost of fixing any defects.
- Coordinate Activities. Although it is nice to believe that all of the coordination required by an agile team can be handled with a 15 minute stand up meeting every day the truth is far from that. This process goal addresses strategies for coordinating the work within a team, coordinating with other development teams (if needed), coordinating with IT groups such as your Enterprise Architects or data management group, and coordinating between subteams a programme or portfolio.
For a more detailed discussion of how these four process goals are the key to scaling your agile software delivery process, please refer to the whitepaper Scaling Agile Software Development: Disciplined Agile Delivery at Scale.
Modified on by ScottAmbler
On April 25, 2013 I gave a webcast for the Global Rational User Community entitled Disciplined Agile Delivery: Going beyond Scrum . During the webcast a large number of questions were asked but unfortunately I couldn’t get to all of them. So I’ve taken the opportunity to write up the answers in this blog posting.
Fequently asked questions. Many of the questions are addressed in the DAD FAQ.
DAD elevator pitch - I will be starting work in a couple of weeks for a company that has just started its Agile journey this year by implementing Scrum. What would Scott put in an elevator chat as to why they should be moving towards DAD. The Disciplined Agile Delivery (DAD) decision process framework is a people-first, learning-oriented hybrid agile approach to IT solution delivery. It has a risk-value delivery lifecycle, is goal-driven, is enterprise aware, and is scalable. There are clearly some interesting aspects to the DAD framework. DAD is a hybrid approach which extends Scrum with proven strategies from Agile Modeling (AM), Extreme Programming (XP), Unified Process (UP), Kanban, Lean Software Development, Outside In Development (OID) and several other methods. DAD is a non-proprietary, freely available framework. DAD extends the construction-focused lifecycle of Scrum to address the full, end-to-end delivery lifecycle from project initiation all the way to delivering the solution to its end users. It also supports lean and continuous delivery versions of the lifecycle: unlike other agile methods, DAD doesn’t prescribe a single lifecycle because it recognizes that one process size does not fit all. DAD includes advice about the technical practices such as those from Extreme Programming (XP) as well as the modeling, documentation, and governance strategies missing from both Scrum and XP. But, instead of the prescriptive approach seen in other agile methods, including Scrum, the DAD framework takes a goals-driven approach. In doing so DAD provides contextual advice regarding viable alternatives and their trade-offs, enabling you to tailor DAD to effectively address the situation in which you find yourself. By describing what works, what doesn’t work, and more importantly why, DAD helps you to increase your chance of adopting strategies that will work for you. The article Introduction to Disciplined Agile Delivery provides a more detailed description.
The book: Could you please repeat the name of the book that Scott is talking about? The book is Disciplined Agile Delivery: A Practitioner’s Guide to Agile Software Delivery in the Enterprise published by IBM Press, June 2012. The Disciplined Agile Delivery (DAD) website and the Disciplined Agile Consortium website are also good DAD resources.
The Surveys: Where is the data published about geographic distribution and effectiveness? All of my survey data, the original questions as asked, and my analysis can be downloaded free of charge from my IT Surveys page. If you ever see a request from me to fill out a survey, please take a few minutes and do so. I think you'll agree that my surveys page is in fact a very useful resource, so please contribute when you can.
Project success criteria: Where would a goal of defining success criteria fall? In the DAD book we describe how the success criteria for the project should be initially identified during Inception. Success criteria, like other things, could evolve throughout the project. You might find the IT Process Success Surveys to be of interest as several of them explored what success criteria projects actually have. Interestingly, its rarely “on time, on budget, to specification”.
Transitioning to DAD: How would you typically phase a DAD implementation, let's say in a project pilot where they haven't been exposed yet to Agile? Same question, any variance if the development team has already started Scrum? This is a fairly complex question to answer. The short story is that you need to invest some time to understand what your strengths and weaknesses are so that you can identify what you need to focus on. You will then likely need to pilot strategies/techniques which are new to your organization before rolling them out widely. You may also need to invest in training and coaching/mentoring depending on your needs. My company, Scott Ambler + Associates, offers these sorts of services and more for organizations interesting in adopting disciplined agile strategies.
Skills: I am aware that ideally developer should also be able to test but in reality theses are usually separate roles. Is it in line with your beliefs\suggestions? Many organizations that are new to agile still have roles that reflect their existing strategy. Non-agile approaches often have people in specific roles such as programmer, tester, designer, and so on. In DAD we promote a different set of agile roles that reflect agile thinking. The implication is that you’re going to have to help individuals transition over to the new way of thinking, something we cover in Chapter 4 of the DAD book. You might also find Mark Lines' blog, No role in DAD for an Analyst? to provide some insights into issues surrounding the transition from traditional to agile roles.
Teaming: What happens with the Product Owner and the Architecture Owner don’t Agree? See my blog What Happens When People Don’t Agree
Skillsets: Different people of the team have different skills, experience, and time horizons. We can't all be generalists, can we? There are several agile roles in DAD, each of which have different rights, responsibilities, and skillsets. So we’re not promoting the idea that everyone have the same skillset. However, we do promote the philosophy that people should strive to be T-skilled generalizing specialists so as to improve their productivity.
Teaming: What are your thoughts on team cohesion? Teams will gel over time. Being co-located helps. Having people who are dedicated 100% to the team helps. Building a team of people who want to be there helps. Self organization helps.
Tool support: Is there an RMC plug-in for DAD + Is there any software behind DAD... or some software that supports it... such as Jazz (RTC) for Agile/Scrum? Yes, IBM Rational does in fact have an RMC plug in for DAD. There is also a template for Microsoft TFS from RDA Corp, Software Development Expert’s Practices Advisor supports DAD comprehensively, and I’m currently working with MethodPark to do so too. Stay tuned to the Disciplined Agile Delivery website for information about tool support.
Governance: Regarding enterprise governance and enterprise IT, how do you start taking a culture that imposes common-process, common-tools, central (often outsourced) IT services, and heavyweight stage/gate across all organizations, and get that evolving toward a (still enterprise aware) lean/agile approach? This is a hard one. I’m often called into organizations to help with this very issue. The challenge is that you need to have a deep understanding of IT governance techniques as well as how to govern agile teams. Governance is something we discussed in detail in the DAD book as well as on the DAD site, see Adopting Agile Governance Requires Discipline.
Executable specifications: TDD was mentioned, can you comment on Behavior Driven Development (BDD) and any impact on this lifecycle? BDD is a slight nuance to acceptance test-driven development (ATDD). BDD/ATDD and TDD are both potential practices that you might choose to follow on a DAD team. I’ve written a fair bit about agile testing and quality strategies and about TDD in detail.
Architecture: When does the first version of architecture gets established and what would require to establish it? You typically start thinking about architecture early in a DAD project during Inception following a practice called architecture envisioning. I’ve also written a fair bit about agile architecture techniques and the potential misconceptions about agile architecture that you may find interesting.
Travel plans: Will you be coming to South Africa at some point? The good news is that Mark Lines, my co-author, will be in South Africa the week of May 20 in Joburg and the following week in Capetown. Contact us for details. I hope to be visiting SA later this year but exact dates haven’t been set yet. So, please stay tuned on Twitter at @scottwambler for further announcements.
Other travel plans: If you'd like me to speak at a local event, including corporate conferences or training events, please contact me.
A few days later someone asked a series of questions that I thought would make an interesting blog posting, so here goes:How much of IBM's projects (in percentage) are agile at the moment?
I don’t have exact numbers, but I believe that 90%+ of our teams in SWG are applying agile techniques in practical ways that make sense for their projects. The primary goal is to be effective – in frequent releases, higher quality, and happy customers – not just agile. By the way, there is roughly 30,000 developers in SWG.Can all of IBM's projects work with an agile methodology?
It’s certainly possible, but it may not always make sense. Products that are in maintenance mode with few bugs or feature requirements may not benefit as much from agile practices -- those teams will likely continue to do whatever it is that they have been doing. Having said that, it's still highly desirable to apply agile techniques on maintenance projects.
Also, agile methods can be harder to use on some projects than others, for example, around hardware development. As a general rule, I believe that the majority of software projects can benefit from agile techniques. The primary determinant of whether a team can adopt agile techniques is culture and skill – not team size, the domain, or the degree of geographic distribution. That notion surprises many people who think that large agile teams
or geographically distributed agile teams
can’t succeed in adopting agile practices.Are agile projects sub-parts of large waterfall projects?
In some cases, that may happen. I’m sure it’s also true in reverse. We see many customers who are migrating from waterfall projects to a more agile way of doing things, and they often start this migration with smaller sub-projects. At IBM, we have tens of thousands of developers worldwide on hundreds of teams, so we have examples of pretty much any combination of agile, iterative, and traditional practices that you can imagine. There’s definitely not one size that fits all, which is a key aspect of the Disciplined Agile Delivery (DAD)
process framework.What do you think the impact of these numbers will be on the PM community?
The IBM PM community is embracing agile. And the reality is that a majority of development organizations around the world are moving to agile now as well (as much as 80% in some of the recent studies I’ve seen). I look forward to the increased adoption of agile methods by the PM community in general. The fact that PMI now offers an Agile Certified Practitioner training program certainly underscores the fact that agile practices are being adopted widely in the mainstream which is a great thing to see.
During the second week of August the Agile 2011 conference was held in Salt Lake City (SLC). As you likely know the Agile Manifesto was formulated 10 years ago in SLC so it was apropos to hold it there. There was some excitement around the 10 year anniversary of the manifesto, with a panel session with the 17 authors of it. Sadly there seemed to be little excitement around the efforts of the 10th anniversay agile workshop
in February which proposed a potential path forward for the agile community. I found the conference to be an evolutionary improvement over the conferences of the past few years, which is a very good thing because the focus since 2008 has moved beyond the "cool" new programming techniques to include the issues that enterprises face.
Starting at the Agile 2008 conference I've seen an uptick in interest in what I would consider some of the more mature topics in agile development, although I'm unfortunately still seeing significant confusion out there too, in part due to over-exuberence of people new to agile. For example, there's people still asking about basic issues about agile architecture
and agile database
techniques, although I was really happy to see more coherent discussions around scaling agile
. My own presentation about the Agile Scaling Model
was well attended and I suspect I opened a few people's eyes regarding the realities that we face (yes, there's a lot more to it than holding a "scrum of scrums", yeesh). We have a long way to go until people really start to understand scaling issues, but we're clearly on the path to getting there.
The conference show floor was interesting, with a wide range of vendors offering services and products focused on agile and lean. One thing that I noticed was many vendors had large monitors showing off their ability to support lean task boards, which for the most part they all looked the same. At the IBM booth we were showing off some of the Jazz tools
, in particular Rational Team Concert (RTC)
. For a long time now we've been giving away fully functional, with no time limit, licenses of RTC for teams of up to 10 people. Something worth checking out.
The Agile 201x conferences hosted by the Agile Alliance are always a good investment of your time and money, and Agile 2011 was no exception. See you at Agile 2012 in the great state of Texas!
When it comes to testing on agile projects it is common practice for agile teams to adopt a "whole team testing
" approach where the team itself does its own testing. To accomplish this agile teams will often embed testers in the development team. Programmers will work closely with the testers, often via non-solo development
strategies such as pair programming, to pick up their valuable testing skills. The testers will in turn pick up new skills from the programmers, and in effect both groups will move away from being just specialists (testers or programmers) to being what's called generalizing specialists
. Whole team testing can be very different from traditional approaches where programmers may do some testing, often unit testing of their own code, and then throw it over the wall to testers and quality assurance (QA) professionals for verification and validation.
The types of testing that the parallel independent test team performs may include:
Pre-production system integration testing. Does the solution work within your overall organizational ecosystem? Importantly, if this is one of several teams currently developing new solutions, does this team's solution work with what will be in production (including the work in progress of other teams) when they go to release? In mid-to-large organizations the only economical way to do this sort of testing is via an independent, centralized team.
. Although it's possible to do usability testing on the development team, the reality is that usability testing is a specialized skill that few people have (although could pick up via non-solo development). Furthermore, particularly for solutions with many potential users, you may want to invest in a usability testing
lab. This is a centralized resource, or an outsourced resource these days, which is shared across many teams.
. Security testing is also a specialized skill, albeit one well supported with sophisticated security testing tools such as the Rational Appscan
suite which can be included in your continuous integration (CI) strategy. Many organizations will centralize their security testing efforts.
Exploratory testing. The fundamental goal of exploratory testing is to discover where the solution breaks, as opposed to confirmatory testing which focuses on showing that the solution conforms to the requirements (this is the type of testing the development team typically focuses on). Exploratory testing is also a skill, a good one which everyone should strive to pick up, but exploratory testers are often few in number in many organizations. So, to leverage their skills effectively you may want to have some of them on the independent test team while they mentor others while doing so.
Non-functional testing. Non-functional requirements have a tendency to fall through the cracks on some development teams. Knowing this the independent test team will often "test to the risk" and focus on non-functional issues.
And much more. The above points are just exemplars, not an exact list. Please follow some of the links above for greater detail.
I'd like to leave you with several important thoughts:
The developers still do the majority of the testing. Just because there's an independent test team it doesn't imply that they are the ones doing all the testing. In fact, nothing could be further from the truth. They should be doing the minority of the testing effort, albeit the more difficult forms of it.
An independent test team will support multiple dev teams. For example, a test team of 5-6 people could support several development teams totalling 70 to 80 people. I typically look for a 15:1 or 20:1 ratio of developers to independent testers, hopefully even higher than that.
- You need to consider better tooling. Although the development team will still be using common agile testing tools such as the xUnit and FIT frameworks the independent test team (ITT) will need more sophisticated tooling. First, the ITT will need to be able to report defects back to the team easily. When the development team is using a Jazz-based tool such as Rational Team Concert (RTC) then this can easily be done using either RTC (the web interface may be sufficient) or another Jazz-enabled product such as Rational Quality Manager (RQM). Second, the ITT will likely need more sophisticated testing tools, such as Rational Appscan for static and dynamic security testing and Rational Performance Tester (RPT) for performance testing (just two of several software quality management tools you should consider).
Independent testing is economical. Although I listed several tools in my previous point (hey, I do work for a vendor after all) an "unfortunate" implication of my advice (unfortunate for IBM at least) is that you can reduce the number of licenses that you require and still get this critical testing done by centralizing their use.
It may be a bit more complicated in regulatory environments. In a strict regulatory environment the independent test team may need to repeat, or at least validate, the testing efforts of the development team. In regulatory environments my fundamental advice is always this -- Have practical people, including yourself, read and interpret the regulations. If you leave it to the bureaucrats you'll get a bureaucratic solution.
This is an important scaling technique. Parallel independent testing, when done in an agile manner, is an important technique which you should consider when scaling agile strategies to meet the uniques needs of the situation that you find yourself in.
Modified on by ScottAmbler
This article has been replaced by an official "Disciplined Agile Manifesto".
The text of the original article remains below.
I've recently been working with Mark Lines of UPMentors and we've had some interesting discussions around evolving the Agile Manifesto which I thought I would share here to obtain feedback. Note that this is not any sort of official position of IBM, nothing in my blog is by the way (unless explicitly stated so), nor is it some sort of devious plot to take over the agile world (although if we did have some sort of devious plot, we'd make the exact same claim). What we hope to accomplish is to put some ideas out there in the hopes of getting an interesting conversation going.
Over the past decade we’ve applied the ideas captured in the Agile Manifesto and have learned from our experiences doing so. What we’ve learned has motivated us to suggest changes to the manifesto to reflect the enterprise situations which we have applied agile and lean strategies in. We believe that the changes we’re suggesting are straightforward:
Where the original manifesto focused on software development, a term which too many people have understood to mean only software development, we suggest that it should focus on solution delivery.
Where the original focused on customers, a word that for too many people appears to imply only the end users, we suggest that it focus on the full range of stakeholders instead.
Where the original manifesto focused on development teams, we suggest that the overall IT ecosystem and its improvement be taken into consideration.
Where the original manifesto focused on the understanding of, and observations about, software development at the time there has been some very interesting work done within the lean community since then (and to be fair there was very interesting work done within that community long before the Agile Manifesto was written). We believe that the Agile Manifesto can benefit from lean principles.
Our suggested rewording of the Agile Manifesto follows, with our suggested changes in italics.
Updating the Values of the Agile Manifesto
We are uncovering better ways of developing software by doing it and helping others do it. Through this work we have come to value:
Individuals and interactions over processes and tools
Working solutions over comprehensive documentation
Stakeholder collaboration over contract negotiation
Responding to change over following a plan
That is, while there is value in the items on the right, we value the items on the left more.
Updating the Principles behind the Agile Manifesto
Our highest priority is to satisfy the customer through early and continuous delivery of valuable solutions.
Welcome changing requirements, even late in the solution delivery lifecycle. Agile processes harness change for the stakeholder’s competitive advantage.
Deliver working solutions frequently, from a couple of weeks to a couple of months, with a preference to the shorter timescale.
Stakeholders and developers must work together daily throughout the project.
Build projects around motivated individuals. Give them the environment and support they need, and trust them to get the job done.
The most efficient and effective method of conveying information to and within a delivery team is face-to-face conversation.
Quantified business value is the primary measure of progress.
Agile processes promote sustainable development. The sponsors, developers, and users should be able to maintain a constant pace indefinitely.
Continuous attention to technical excellence and good design enhances agility.
Simplicity--the art of maximizing the amount of work not done--is essential.
The best architectures, requirements, and designs emerge from self-organizing teams.
At regular intervals, the team reflects on how to become more effective, then tunes and adjusts its behavior accordingly.
Leverage and evolve the assets within your organizational ecosystem, and collaborate with the people responsible for those assets to do so.
Visualize workflow to help achieve a smooth flow of delivery while keeping work in progress to a minimum.
The organizational ecosystem must evolve to reflect and enhance the efforts of agile teams, yet be sufficiently flexible to still support non-agile or hybrid teams.
We’re agile – things evolve, including manifestos. Looking forward to your feedback (add a comment).
Updates Since this Was First Published:
One of the scaling factors
of the Agile Scaling Model (ASM)
is technical complexity.
The fundamental observation is that the underlying technology of solutions varies and as a result your approach to developing a solution will also need to vary.
It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch on a known technology platform, but not so easy when there are several technologies, the technologies are not well known, or legacy assets are involved.
There are several potential technical complexities which a Disciplined Agile Delivery (DAD) team may face:
- New technology platforms. Your team may choose to work with a technology platform which is either new to the team or sometimes even new to the industry. In the past few years new technology platforms include the Android operating system, Apple’s iPad platform, and various cloud computing (http://www.ibm.com/ibm/cloud/) platforms. Working with these platforms may require you to adopt new development tools and techniques, not to mention the need to train and mentor your staff in their usage. Furthermore, your team may need to allocate time for architectural spikes to explore how to use the new technology and to prove the overall architecture with working code early in the project lifecycle (this is a DAD milestone).
- Multiple technology platforms. IT solutions often run on multiple platforms. For example, a system’s user interface (UI) could run in a browser, access business logic implemented using J2EE on Websphere which in turn invokes web services implemented in COBOL running on a Z-series mainframe, and stores data in an Oracle database, a DB2 database, and in several XML files. Implementing new business functionality, or updating existing functionality, could require changes made on several of these platforms in parallel. The implication is that you’ll need to adopt tools and strategies which enable your team to develop, test, and deploy functionality on all of these platforms. Testing and debugging in particular will become more difficult as the number of technology platforms increases, potentially requiring you to adopt the practice of parallel independent testing. The Agility at Scale survey found that 34% of respondents indicated that their agile teams were working with multiple technology platforms.
- Legacy data. IT solutions should leverage existing, legacy data wherever possible to reduce the number of data sources and thereby increase data quality within your organization. Also, using existing data sources can potentially speed up development, assuming your team has a good relationship with the owners of the legacy data sources (sadly, this often isn’t the case as the Data Management Survey found). Working with legacy data sources may require improved database regression testing, practices, database refactoring practices, and agile approaches to data administration. The Agility at Scale survey found that 42% of respondents indicated that their agile teams were working with legacy data sources (personally, I’m shocked that this figure is so low, and fear that many agile teams are contributing to data quality problems within their organization as a result).
- Legacy systems. There are several potential challenges with legacy systems. First, the code quality may not be the best either because it was never really that good to begin with or because it’s degraded over the years as multiple people worked with it. You know you’ve got a quality problem if you’re either afraid to update the code or if when you do so you have to spend a lot of time debugging and then fixing problems revealed when doing the update. If the legacy system is a true asset for your organization you will want to pay off some of this technical debt by refactoring the code to make it of higher quality. Second, you may not have a full regression test suite in place, making it difficult to find problems when you do update the code let alone when you refactor it. Third, your development tools for your legacy code may be a bit behind the times. For example, I often run across mainframe COBOL developers still working with basic code editors instead of modern IDEs such as Rational Developer for System Z. Some of the strategies to deal effectively with legacy systems are to adopt a modern development toolset if you haven’t already done so (better yet, if possible adopt a common IDE across platforms and thereby reduce overall licensing and support costs) and to adopt agile practices such as static code analysis, dynamic software analysis, and continuous integration (CI). The Agile Project Initiation Survey found that 57% of respondents were integrating their new code with legacy systems and 51% were evolving legacy systems.
- Commercial off-the-shelf (COTS) solutions. COTS solutions, also called package applications, can add in a few complexities for agile teams. The packages rarely come with regression test suites, they often have rules about what you can modify and what you shouldn’t (rules that are ignored at your peril), and they’re often architected with the assumption that they’re the center of the architectural universe (which is a valid assumption if they’re the only major system within your organization). As I describe in my article Agile Package Implementations it is possible to take an agile approach to COTS implementations, although it may require a significant paradigm shift for the people involved. The Agility at Scale survey found that 15% of respondents indicated that their agile teams were working with COTS solutions.
- System/embedded solutions. For the sake of simplicity, if your team is developing a solution with both hardware and software aspects to it then you’re a systems project. Embedded systems are a specialization where the system has a few dedicated functions often with real-time constraints. Bottom line is that systems/embedded projects are typically more challenging than software-only projects – it gets really interesting when laws of physics starts to kick in, such as when you’re building satellites or space probes. I highly suggest Bruce Douglass’s book Real-Time Agility if you are interested in taking an agile approach to systems/embedded solution delivery.
The technical complexity faced by a project team is contextual – Working with four technology platforms is straightforward for someone used to dealing with seven, but difficult for someone used to dealing with just one. Recommended Reading:
One of the scaling factors
called out in the Agile Scaling Model (ASM)
is “regulatory compliance”. This name is a bit of a misnomer because this scaling factor really addresses two issues: complying to regulations imposed upon you from external sources and choosing to adhere to internal regulations willingly adopted by your organization. It is relatively common for agile teams to find themselves in such situations. For example, in the 2009 Agile Practices Survey
one third of respondents said that they were applying agile on projects where one or more industry regulations applied.
First let’s consider external regulatory compliance. In these situations you may face the need to undergo an audit by an external regulatory body with consequences for non-compliance ranging from anywhere to a warning to a fine or even to legal action. Sometimes even a warning may be a grave thing. A few years ago I was working with a pharmaceutical company which had discovered that a warning from the FDA for non-compliance with their CFR 21 Part 11 regulation, when reported in major newspapers, resulted on average in a half-billion dollar loss to their market capitalization as the result of a dip in their stock price. There are financial regulations such as Sarbanes-Oxley and Basel II, informational regulations such as HIPAA which focuses on health information privacy, technical regulations such as ISO 27002 for security practices, and even life-critical regulations such as some of the FDA regulations.
External regulations are typically managed by a government organization or industry watchdog will range in complexity and can have a myriad of effects on project teams. For example, you may need to be able to prove that you had a documented process and that you followed it appropriately; you may need to produce extra artifacts, or more detailed artifacts, than you normally would; you may need to add extra features to your solution, such as tracking financial information, that you wouldn’t have normally implemented; you may need to produce specific reports to be submitted to the regulatory body; or you may even need to submit your team to audits, sometimes scheduled and sometimes not, to ensure regulatory compliance. Interestingly, even though many of those requirements go against the agile grain, the 2009 Agility at Scale Survey
found that organizations were successfully applying agile techniques while still conforming to external regulations. So yes, it is possible to scale your agile strategy to address regulatory compliance.
Second, let’s consider compliance to internally adopted, or sometimes even developed, “regulations” which you will be potentially evaluated/appraised against. Perfect examples of these are process improvement frameworks such as CMMI and ISO 900x. Similar to external regulations, the 2009 Agility at Scale Survey
found that some agile teams are succeeding in situations where they have chosen to adopt such frameworks. It’s important to note that frameworks such as CMMI aren’t primarily about ensuring the compliance of development teams to a standard process, regardless of what CMMI detractors may claim, but instead about process improvement. Process improvement at the IT department (or beyond) is an enterprise discipline issue from the point of view of ASM, implying that frameworks such as CMMI affect more than one scaling factor.
When you find yourself in a regulatory situation, whether those regulations are imposed or willingly adopted, the best advice that I can give is to read the regulations and develop a strategy to conform to them in the most agile manner possible. If you let bureaucrats interpret the regulations you’ll likely end up with a bureaucratic strategy, but if you instead choose to take a pragmatic approach you will very likely end up with a very practical strategy. Part of that strategy is to treat the regulatory representative(s) within your organization as important stakeholders whom you interact with regularly throughout the project.
Rolf Nelson recently recorded a short (5 min) podcast about IBM Rational
(RTC). RTC is a complete agile collaborative development
environment providing agile planning, source code management, work item
management, build management, and project health, along with integrated
reporting and process support. I've worked with RTC for a couple of years now and have been truly impressed with it. What should be of interest to many people is the Express-C version which is a free, fully-featured, 10-license version of RTC which can be easily downloaded from www.jazz.net
My January 2010 DDJ Agile Update, Tragic Mistakes When Adopting Test Driven Development (TDD)
, is now online. In the article I summarize what I consider to be common, and tragic, mistakes that I'm seeing organizations make when they attempt to adopt TDD.
These mistakes include:
The article also goes into potential benefits of TDD as well as potential challenges that you're face when adopting it.
On Tuesday, Dec 1, 2009 Philippe Kruchten
, Bruce MacIsaac
, and myself participated on two virtual panels about the future of the Unified Process (we did two to support callers from around the globe) for the Global Rational User's Group (GRUG)
. During the panel sessions we discussed a bit of the history of the Unified Process, some of the misconceptions people have with it, some of the common mistakes people made implementing it (instantiating it to be documentation heavy and/or serial) due to those misconceptions, how it can be very agile if you choose to instantiate it that way, the OpenUP
, the AUP
, how UP relates to the IBM Practices
, and other topics.
The links to the recordings are:
Hope you find it interesting. As I've written in the past, the RUP can be as agile as you want to make it. Furthermore, there are a lot of really good ideas in the RUP that the agile community can and should choose to mine, although sadly I see far too many teams doing things the hard way and reinventing the process wheel on their own. I hope they're enjoying themselves, because it clearly isn't a very efficient way for them to go about process improvement.
When you’re inside, safe in the warmth of your home watching snow fall on your driveway outside, all snowflakes look the same. But, when you look at a snowflake up close, particularly when you do so under a microscope, you quickly discover that all snowflakes are in fact unique.
It’s the same with IT projects.
When you look at them from afar, particularly
from a very high level, they all look the same.
However, when you look at them up close, you quickly discover that they too
The agile scaling factors
, which are really just general scaling factors applicable to all types of IT
project regardless of paradigm, help to make this very clear.
For example, when it comes to team size some teams
are small, less than ten people perhaps, some are medium sized, and some are very
large (with hundreds of people).
comes to distribution some teams are co-located in the same room, some teams
have team members in different cubicles in the same building, some have people
working in different buildings, and some even have people working in different
Many agile teams work in
regulatory environments, in fact the July 2009 DDJ State of the IT Union survey reports that one third of agile teams must
comply to industry regulations, although clearly many agile teams do not have
this as a concern. That’s only three
scaling factors. The point is that a
small, co-located team working in a non-regulatory environment will work much
differently than a fifty-person team working in three different locations,
which in turn works differently than a two hundred person team in the same
building working in a regulatory situation.
Different teams, facing different scaling issues will work in different
ways – unique snowflakes from a process point of view.
At Agile 2009 in August Sue McKinney, VP of Development Transformation with IBM Software Group, was interviewed by DZone's Nitin Bharti about IBM's experiences adopting agile techniques. There are over 25,000 developers within IBM Software Group alone. Follow the link to the interview
to view it online (there is also a text transcript posted there. There's some great insights into the realities of scaling agile in large teams, in distributed agile development, and in particular how to transform a large organization's development staff.
Modified on by ScottAmbler
When I talk to people about scaling agile techniques, or about agile software development in general, I often put describe strategies in terms of various risks. I find that this is an effective way for people to understand the trade-offs that they're making when they choose one strategy over another. The challenge with this approach is that you need to understand these risks that you're taking on, and the risks that you're mitigating, with the techniques that you adopt. Therein lies the rub, because the purveyors of the various process religions ( oops I mean methodologies) rarely seem to coherently the discuss the risks which people take on (and there's always risk) when following their dogma (oops, I mean sage advice).
For example, consider the risks associated with the various strategies for initially specifying requirements or design. At the one extreme we have the traditional strategy of writing initial detailed speculations, more on this term in a minute, and at the other extreme we have the strategy of just banging out code. In between are Agile Modeling (AM) strategies such as requirements envisioning and architecture envisioning (to name a few AM strategies). Traditionalists will often lean towards the former approach, particularly when several agile scaling factors apply, whereas disciplined agile developers will lean towards initial envisioning. There are risks with both approaches.
Let's consider the risks involved with writing detailed speculations (there's that term again):
You're speculating, not specifying. There is clearly some value with doing some up-front requirements or architecture modeling, although the data regarding the value of modeling is fairly slim (there is a lot of dogma about it though), but that value quickly drops off in practice. However, the more you write the greater the chance that you're speculating what people want (when it comes to requirements) or how you're going to build it (when it comes to architecture/design). Traditionalists will often underestimate the risks that they're taking on when they write big requirements up front (BRUF) , or create big models up front (BMUF) in general, but in the case of BRUF the average is that a large percentage of the functionality produced is never used in practice -- this is because the detailed requirements "specifications" contained many speculations as to what people wanted, many of which proved to be poor guesses in practice.
You're effectively committing to decisions earlier than you should. A side effect of writing detailed speculations is that by putting in the work to document, validate, and then update the detailed speculations the decisions contained in the speculations become firmer and firmer. You're more likely to be willing to change the content of a two-page, high-level overview of your system requirements than you are to change the content of a 200-page requirements speculation that has been laboriously reviewed and accepted by your stakeholders. In effect the decision of what should be built gets "carved in stone" early in the process. One of the principles of lean software development is to defer decisions as late as possible, only making them when you need to, thereby maximizing your flexibility. In this case by making requirements decisions early in the process through writing detailed speculations, you reduce your ability to deliver functionality which meets the actual needs of your stakeholders, thereby increasing project risk.
You're increasing communication risk. We've known for decades that of all the means of communication that we have available to us, that sharing documentation with other people is the riskiest and least effective strategy available to us for communicating information (face-to-face communication around a shared sketching environment is the most effective). At scale, particularly when the team is large or the team geographically distributed, you will need to invest a little more time producing specifications then when the team is co-located, to reduce the inherent risks associated with those scaling factors, but that doesn't give you license to write huge tomes. Agile documentation strategies still apply at scale. Also, if you use more sophisticated tooling you'll find it easier to promote collaboration on agile teams at scale.
You're traveling heavy. Extreme Programming (XP) popularized the concept of traveling light. The basic idea is that any artifact that you create must be maintained throughout the rest of the project (why create a document if you have no intention of keeping it up to date). The implication is that the more artifacts you create the slower you work due to the increased maintenance burden.
There are also risks involved with initial envisioning:
You still need to get the details. Just because you're not documenting the details up front doesn't imply that you don't need to understand them at some point. Agile Modeling includes several strategies for exploring details throughout the agile system development life cycle (SDLC), including iteration modeling performed at the beginning of each iteration as part of your overall iteration planning activities, just in time (JIT) model storming throughout the iteration, and test-driven development (TDD) for detailed JIT executable specification.
You need access to stakeholders. One of the fundamental assumptions of agile approaches is that you'll have active stakeholder participation throughout a project. You need to be able to get information from your stakeholders in a timely manner for the previously listed AM techniques to work effectively. My experience is that this is fairly straightforward to achieve if you educate the business as to the importance of doing so and you stand up and fight for it when you need to. Unfortunately many people don't insist on access to stakeholders and put their projects at risk as a result.
You may still need some documented speculations. As noted previously you may in fact need to invest in some specifications, particularly at scale, although it's important to recognize the associated risks in doing so. For example, in regulatory compliance situations you will find that you need to invest more in documented speculations simply to ensure that you fulfill your regulatory obligations (my advice, as always, is to read the regulations and then address them in a practical manner).
The ways that you approach exploring requirements, and formulating architecture/design, are important success criteria regardless of your process religion/methodology. No strategy is risk free, and every strategy makes sense within given criteria. As an IT professional you need to understand the risks involved with the various techniques so that you can make the trade-offs best suited for your situation. One process size does not fit all.
My final advice is to take a look at the Disciplined Agile Delivery (DAD) framework as it provides a robust strategy for addressing the realities of agile software development in enterprise settings.
Modified on by ScottAmbler
For several years now I've written various articles and newsletters on the topics of estimating and funding strategies for software development projects, and in particular for agile software development projects. Whenever I talk to people about agile software development, or coach them in how to succeed at it, some of the very first questions that I'll be asked, particularly by anyone in a management role, is how to fund agile software development projects. Apparently a lot of people think that you can only apply agile strategies on small, straightforward projects where it makes sense to do a time and materials (T&M) approach. In fact you can apply agile strategies in a much greater range of situations, as the various surveys
that myself and others are showing time and again. My goal with this blog posting is to summarize the various strategies for, and issues surrounding, the funding of agile software development projects.
There are three basic strategies for funding projects, although several variations
clearly exist. These strategies are:
- "Fixed price". At the beginning of the project develop, and then commit to, an initial estimate based on your up-front requirements and architecture modeling efforts. Hopefully this estimate is given as a range, studies have shown that up-front estimating techniques such as COCOMO II or function points are accurate within +/- 30% most of the time although my July 2009 State of the IT Union survey found that on average organizations are shooting for +/- 11% (their actuals come in at +/- 19% on average, but only after doing things such as dropping scope, changing the estimate, or changing the schedule). Fixed-price funding strategies are very risky in practice because they promote poor behavior on the part of development teams to overcome the risks foisted upon them as the result of this poor business decision. It is possible to do agile on a fixed budget but I really wouldn't recommend it (nor would I recommend it for traditional projects). If you're forced to take a fixed-price approach, and many teams are because the business hopes to reduce their financial risk via this approach not realizing that it actually increases their risk, then adopt strategies that reduce the risk.
- Stage gate. Estimate and then fund the project for given periods of time. For example, fund the project for a 3-month period then evaluate it's viability, providing funding for another period of time only to the extent that it makes sense. Note that stages don't have to be based on specific time periods, they could instead be based on goals such as to intiate the project, prove the architecture with working code, or to build a portion of the system. Disciplined agile methods such as Open Unified Process have built in stage-gate decision points which enable this sort of strategy. When the estimation technique is pragmatic, the best approaches are to have either the team itself provide an estimate for the next stage or to have an expert provide a good gut feel estimate (or better yet have the expert work with the team to develop the estimate). Complex approaches such as COCOMO II or SLIM are often little more than a process facade covering up the fact that software estimating is more of an art or a science, and prove to be costly and time consuming in practice.
- Time and materials (T&M). With this approach you pay as you go, requiring your management team to actually govern the project effectively. Many organizations believe a T&M strategy to be very risky, which it is when your IT governance strategy isn't very effective. An interesting variation, particularly in a situation where a service provider is doing the development, is an approach where a low rate is paid for their time which covers their basic costs, the cost of materials is paid out directly, and delivery bonuses are paid for working software. This spreads the risk between the customer/stakeholder and the service provider. The service provider has their costs covered but won't make a profit unless they consistently deliver quality software.
The point is that there are several strategies for funding agile software development projects, just like there are several strategies for funding traditional software development projects. My experience is that fixed-price funding strategies are incredibly poor practice which increases the risk of your software development projects dramatically. I recognize how hard it can be to change this desire on the part of our business stakeholders, but have also had success changing their minds. If you choose to perservere, which is a difficult decision to make, you can help your organization's decision makers to adopt more effective strategies. Like you they want to improve the effectiveness of your IT efforts.Further reading: (In recommended order)
- Something's Gotta Give: Argues for a flexibly approach to funding, schedule, and/or scope.
- Agile on a Fixed Budget: Describes in detail how to take a fixed-price approach on agile projects.
- The Dire Consequences of Fixed-Price IT Projects: Describes in detail the questionable behavior exhibited by IT teams when forced to take a fixed-price approach.
- Is Fixed-Price Software Development Unethical?: Questions the entire concept of fixed-price IT projects, overviewing some of the overwhelming evidence against this really poor practice.
- Reducing the Risk of Fixed-Price Projects: Describes viable strategies for addressing some of the problems resulting from the decision of fixed-price projects.
- Strategies for Funding Software Development Projects: Describes several variations on the strategies described above.
- Lies, Great Lies, and Software Development Project Plans: Summarizes some results from the July 2009 State of the IT Union survey which explored issues related to project funding (among many).