AIXpert Blog is about the AIX operating system from IBM running on POWER based machines called Power Systems and software related to it like IBM Systems Director, PowerVM for virtualisation and PowerSC for security plus performance monitoring and nmon
This Blog is brought to you by Clive Benjamin (Principal Engineer) who worked out how to do it.
If your HMC has a quality high resolution local screen or KVM screen then the Restricted Shell terminal window font size is far too small to read and the font used very narrow lines - in our humble opinion . This blog shows you how to fix this and "no", the obvious window Font Size option does not work.
1) Below: On the HMC start the Restricted Shell window
2) Below: With the cursor on the terminal window used... [More]
IBM Systems Director and PowerVC make use of a private API to use Shared Storage Pool (SSP) clones of LU (like a LUN allocated from the pool). But there is no command to let you do that. LU Clones are quick and good for duplicating a master copy for small virtual machines to boot the same OS level and it means greatly reduced disk use as blocks are shared until written too.
As there is not VIOS command to clone there is no command to let you see what is cloned and what is not.
I tripped over this when trying to clean up my SSP... [More]
If you go looking then you can find IBM websites covering AIX that tell you about AIX 7 Express Edition being limited to LPARs (virtual machines) with a maximum of 4 CPUs and a maximum 32 GB or memory. The idea being a reduces price for small machines hosting small virtual machines.
You can also find the Announcement of the removal of these two restrictions for certain POWER7 models like Power 710, 720 and 730.
UPDATED: 30 JANUARY 2015
The IBM Official Technote can be found here http://www-01.ibm.com/support/docview.wss?uid=nas8N1020533
It clarifies the mean of the ASMI settings i.e. it is the number of adapter slots AND the specific slots AND a further bug only some settings work until the next firmware release.
Even with the newer firmware my recommendation stands:
Completely Switch OFF the I/O Adapter Enhanced Capacity feature as you install the machine as it needs a power off
- Unless you are running Linux on... [More]
Most of the Power Systems range of servers since POWER7 allow for the HMC organised online hot replacement of:
and the online hot adding, removing or replacement of:
Internal hard disks
From POWER8 onwards we are not going to have the online add or remove CEC nor adding or removing Processors modules nor Memory cards. Of course online changes using Capacity Upgrade on Demand is still very much an option. On the POWER8, I/O Drawers we... [More]
People share nmon captured data files with me all the time because they would like me to review the data and make suggestions about the hot spot and tuning.
I guess they trust me :-)
Some user get a little paranoid about the data (mostly due to having to follow many procedures to get the nmon file through firewalls so it can be emailed to me) and ask questions about if it contains information they don't want to accidentally share. Thankfully the nmon data files is just a text file that you can edit with "vi" so there... [More]
I need to make it clear that these pictures are from an Early Ship Program machine which might vary a little from the final Generally Available (GA) models from November 2014. For example, missing labels or stickers plus colours of handles and parts etc. The engineering will be much the same.
Our machine is part of the Early Ship Program and we get to run hardware tests before machines are shipped to customers from GA. These test include things we would never expect customer to do -... [More]
We have the new HMC 8.1 code stream to manage the POWER8 machines. It also manages the POWER6 and POWER7 machines but not POWER5.
I find the HMC Virtual Storage Management panel very useful and saves me time for assigning Shared Storage Pool (SSP) space to virtual machines (VM's) and automatically doing this for Dual VIO Servers without having to log-on to the VIOS servers at all. It is also good for assigning virtual DVDs to VMs to boot and install the various operating systems, AIX, RHEL, SLES, Fedora, Debian, etc.
This blog also applies to Power Servers running Linux on Power native on the machine.
While you can perform a text based Linux install on the dumb console terminal emulator (see previous AIXpert Blog about the serial cable that you need and the software) as a challenge to survive the Tab navigation, space selection, sometimes the cursor works and occasional Function Key show stopper (SUSE SLES 11) - I would recommend a VNC install.
First, you can get back to your desk to run VNC viewer client to complete the install and not... [More]
I regularly get asked to run a demonstration for IBM Systems Director but that is a time consuming business for both me and the audience. Especially, when you can find out every thing that I know from the comfort of you own office or even home office plus Stop, Replay and Pause via YouTube videos. So here is a reminder and hopefully a page I can point to when I next gets asked.
ISD63 Workshop 1 Techie Intro... [More]
The latest Versioned Workload Partition (VWPAR) Version 1.1.2 is available but largely secret!
With this update I get on my AIX 7 virtual machine, in which I have installed both AIX5.2 and AIX 5.3 support:
# lslpp -L | grep -i vwpar
vwpar.52.rte 18.104.22.168 C F AIX 5.2 Versioned WPAR Runtime
vwpar.images.52 22.214.171.124 C F Versioned WPAR 5.2 Support
vwpar.images.53 126.96.36.199 C F Versioned WPAR 5.3 Support
vwpar.images.base 188.8.131.52 C F ... [More]
Most AIX system administrators use: smitty tcpip to add a hostname, IP address, network mask, gateway and DNS server setting to get the virtual machines (LPAR) and AIX on a network. And as a side benefit so we don't need to use the ghastly VTERM console any more as ssh or the dreaded unsecure telnet (just don't do it) can now be used - as the root user:
# smitty tcpip
Minimum Configuration & Startup
Use DHCP for TCPIP Configuration & Startup
I had better point out that any performance tool of AXI command in a POWER Virtual Machine (LPAR) can only see its use of the Physical CPU, the size of its own CPU pool and (if Monitoring is switched on at the HMC), it has a number of the CPU use by "Other LPARs" use of its own CPU Pool. nmon gets these numbers by default and the nmon analyser graphs this data in the LPAR tab - this assumes its a Shared CPU LPAR. If it is a dedicated CPU LPAR then it can't get any of this Pool data and there is no LPAR tab in the nmon... [More]
The answer is "it depends" and there is no Rule Of Thumb - IMHO.
The 2 times ROT is very old school and for small servers where peaks could really run out of RAM fast and hurt.
The worst I saw was 6 times but that was OS guys and RDBMS guys and app guys all said 2 times ... each!! and then the System Admin guy just added them up not realising it was the same 2 times! Basically, bonkers and they used 2% in the end.
With machines with large memory, say starting at 64 GB, the memory demand... [More]