Performance issue specifically while calculating the Regular Hours. Symptom In the Work Order Tracking application, after entering both Start and End Time fields it can take a few seconds to the system to calculate the Regular Hours. Resolving the problem Procedure: 1. Go to Application Designer. 2. Bring up the Work Order Tracking application. 3. Go to the Actuals tab > Labor sub-tab. 4. Repeat the steps below for both Start and End Time fields: 4.1. Right-click on field > Properties. ... [More]
You may have already asked yourself whether there is a list of available mxevents somewhere in Maximo, that you can use in some of the Application Designer controls properties to fire events. There is not a specific list already done or available, however, it is relatively simple to get a list of the mxevents available. To view all of the events defined in the system, you must export the system .xml files by selecting a main tab from the Application Designer and choosing Select Action > Export... [More]
Hello, My name is Edgar Mengelberg and I have been working with the Maximo and TPAE product suite in various Support roles for over 15 years. Scheduler (aka Graphical Scheduling or GS) is a great tool that was embedded into core Maximo from version 7502 (prior to this , it was an add-on) Graphical Assignment (=GA) is also an option in core Maximo Asset Management (MAM) or TPAE that can be used for similar work management and scheduling. The relationship between GS (Graphical Scheduling) and GA (Graphical Assignment) is that GS is... [More]
I recently had a client ask me if it was possible to increase the size of a multipart textbox in Maximo without making a global change to the field sizes using the field-size-config.xml. He wanted to change the length of the Itemnum field in the multipart textbox that contains the Itemnum and Description because in some cases the complete item number was not visible. Unfortunately there is no way to modify the length of a single field that works for a multipart textbox. However you can use two separate text boxes... [More]
When adding a new document via Attached Documents in Maximo the "Advanced Options" section by default shows as expanded as shown in the image below. Some Maximo administrator's prefer the Advanced Options to not display to avoid confusion for their users and so that the defaults for these options are used. You can get this section to start collapsed by modifying the Library xml and adding collapsed="true" to the beginning of the appropriate section. Please see the section of the Library.xml below that needs to... [More]
In Maximo, when you try to open the Workflow Designer app, you may see this beautiful and inspiring error message : Workflow Canvas failed to load! Please check browser security settings and get the Java Plugin No Java 2 SDK This should be the first thing you need to investigate when you have Java issues with Maximo : 1- What is the browser version that you are using for this test? 2- Can you try different browsers and let me know the results? (Firefox, Internet Explorer, Chrome) 3- Does the error happen if you clear... [More]
BMXAA3456E error is displayed while trying to run reorder manually or via crontask. Diagnosing the problem: Run the following query, replacing the XXXX by the Storeroom in question: SELECT * FROM REORDERMUTEX WHERE LOCATION='XXXX'; Resolving the problem: If that query returns any row, then delete the row by running: DELETE FROM REORDERMUTEX WHERE LOCATION='XXXX'; The REORDERMUTEX table is a locking mechanism to make sure no two users are running a MR, Direct Issue or Storeroom Reorder at the same time.... [More]
Java Security warning can continue even after applying Maximo Interim Fix containing newly signed applets as indicated in http://www-01.ibm.com/support/docview.wss?uid=swg21972870 . Solution: 1) Delete the WebSphere temporary file caches (temp and tranlog) following the procedure described in http://www-01.ibm.com/support/docview.wss?uid=swg21660821 2) Delete the web browser cache (internet temporary files and cookies) from every computer that accesses Maximo.
In the past the question has come up often regarding the best way to configure the error queue exception destination for the inbound continuous queue (CQINBD) and the inbound continuous error queue (CQINBDERR) used by the Maximo Integration Framework. There are many ways these exception destinations can be configured, and it really depends on how the Ingration Framework system is being used and what the preferred behavior would be. In most previous documents, my instructions stated specifying the name of the error queue CQINBDERR in the... [More]
It was recently brought to my attention by a customer who installed an Interim Fix for Maximo 18.104.22.168 that the Maximo Asset Management version number had been updated from Maximo 22.214.171.124 to 126.96.36.199. This was a cause for alarm which in term had them contact IBM to confirm the version of the application and look in to why it was showing incorrectly. After reviewing the system information which looked similar to the following, but not the same. (I don't have an environment with this versioning issue). Version Tivoli's... [More]
Hi, I just got 188.8.131.52 downloaded. It's really nice to find a comprehensive read me file that comes with the new fix pack. The read me contains info about the new work centers (with links that take me to some YouTube demo recording, steps for Watson integration, knowledge center for the work center users), new functionality by applications, installation steps with notes to use UI configuration tool to enable 184.108.40.206 work centers and a list of fixes by applications. I've attached the read me file here for... [More]
When you want to add a constraint between work orders the constraint icon from the toolbar is selected. The cross is visible in the Gantt view. Typically this is where work orders have constraints associated. However the constraint cannot be added between the parent-child work orders. Why would this be the case? The data retrieved by Scheduler needs to include all the components it requires. The parents also need to be displayed. Otherwise, it is not able to work with them as the underlying data is not... [More]
Eventually the Long Description field can be grayed out in all applications while using Maximo in Internet Explorer. Turn on the Compatibility View in Internet Explorer following the steps below: 1. Open Internet Explorer. 2. Go to Tools > Compatibility View Settings. 3. From Compatibility View Settings dialog: 3.1. Enter the Maximo URL in the Add This Website field. 3.2. Click on Add. 3.3. Click on Close.
Maximo SysAdm Times Welcome to the Sysadm Times !!!!!! LABTRANS.STARTDATE is non-persistent in Maximo 7.6 LABTRANS.STARTDATE field is not persistent in 220.127.116.11. Also the java class associated to this field is different, it's changed to psdi.app.labor.virtual.FldLabTransStartDateNP however in 7.5 it was psdi.app.labor.FldLabTransStartDate. In 7.6.x Go to Database Configuration --> LABTRANS -->STARTDATE is non-persistent and the java class associated to this field is psdi.app.labor.virtual.FldLabTransStartDateNP ... [More]
Transferring 100 Items on a 1/3 Conversion Should Not Mean That You Receive 99 Back When there is a conversion factor between two storerooms and the conversion is 1/3 units the consequence can be that after sending 100 items and return them, only 99 are returned with one lost. Understandably this happens because it is using a 1/3 conversion. This can be resolved by modifying the attribute Conversion value to have 4 decimal points instead of the out of the... [More]