ACM Assets Quick Overview
AlexisSilva 2700057EA4 Visits (3536)
Configuration Managed (CM) assets are different from other product assets because they can be composed of other assets or components defined within a hierarchy that have associated CM rules. Thus, CM assets are also called complex assets and they are built based on its corresponding model.
You can have a better understanding of the ACM Model application and its concepts accessing the following URL: http
Since CM assets are complex (such as aircraft and rail vehicles) , the Assets (CM) application and the CM Asset itself have some specialized features. The following considers some of the most important ones:
BDI (Build Data Interpreter) is the centerpiece of Maximo Asset Configuration Manager for compliance capability. It provides a comprehensive status derivation for aircraft, rail vehicles and other conf
An aircraft is expected to have a configuration that it is in compliance with its engineering design definition (see details on the Model) The BDI will check the current aircraft configuration, posi
It can also be run manually in the Assets (CM) application.
• Install/Remove Process
Anytime a sub component needs to be taken to the maintenance shop for a repair or a preventive maintenance (PM), it will need to be removed from its parent component and then installed back after all the services are finished or replaced with another component
To perform these operations in Maximo Asset Configuration Manager:
Go To >> Assets >> Assets (CM) >> Select an asset
• Maintenance Plan / Work generation
The Maintenance Plan or Maintenance Policy for any asset is represented by all the PMs associated with its related CM Item and those of other CM Items in the same Model. These PMs can be made valid or invalid for a particular model configuration / variation – this is a type of CM rule.
You can define the maintenance plan at the CM Item level (associating a Master PM with it), then associate it with a build item that will be part of a Model. When the assets are created, the master PMs will create PMs for the assets.
An example of a maintenance plan was created in item 3 of the ACM Model blog post that you can refer to with the link at the beginning of this post.
• This Preventive Maintenance (PM) is automatically approved ?
When the PM is due, a Work Order to perform the inspection services for this Asset will be created. After all the services for this Work Order are performed and the WO is closed, the PM is automatically reset and a new cycle starts, Maintenance Plan status and history can be seen in the Assets View tab, Maintenance Plan and Maintenance History subtabs for the Assets and each of its sub components.
We hope you liked the blog entry, feel free to comment, share your experiences.