IBM Data Replication's CDC News
DavidT 120000JC6D Tags:  db2 data_replication netezza oracle infosphere 2 Comments 15,567 Views
If you're looking for an excellent way to replicate changed data from a wide range of databases into a Netezza appliance, you can do so through InfoSphere Data Replication. The latest release provides an Apply program that is both native to Netezza and optimized for Netezza targets. This Apply is built from Data Replication's CDC technology and is also compatible with the CDC technology found in InfoSphere Change Data Capture and InfoSphere Classic Change Data Capture for z/OS. This means you can replicate data to Netezza from source databases ranging from Oracle, DB2, and others on UNIX or Windows to DB2* and IMS on the mainframe. Ordering information can be found in the Data Replication announcement letter on ibm.com.
* Data Replication's CDC Apply program cannot be used to feed changed data to the IBM DB2 Analytics Accelerator (IDAA).
This post is the answer to one of the FAQs found in
DavidT 120000JC6D Tags:  compatibility ims replication data_replication cdc 5 Comments 10,213 Views
In 2011, IBM released three new data replication products:
One question that comes up is whether the two IMS replication products are compatible with either the new Data Replication product or the existing InfoSphere CDC products. The answer is yes - the IMS products are compatible with both new and existing products that contain the CDC technology. IMore specifically, they can provide IMS changed data to any data replication solution that you can build with IBM's CDC technology. For example, you can create unidirectional (one-way) subscriptions that feed IMS changed data to any database that can be targeted by CDC:
Two notes about this picture:
You could also feed IMS changed data into other business software such as ETL, IBM's DataStage, and ESBs:
In other words, the new IMS data replication products extend the reach of IBM's CDC technology by adding IMS as a source for log-based capture of changed data. If you have technical questions, see the Classic CDC section of the Information Center.
This post is the answer to one of the FAQs found in Licensing Tips for IBM Data Replication.
In April 2013, IBM announced Version 10.5 of DB2 for Linux, UNIX, and Windows. The same letter announced that DB2 AESE and DB2 AWSE would provide limited use of IBM InfoSphere Data Replication's (IIDR's) Change Data Capture (CDC) technology at no additional cost. However, the "limited use" statement sometimes leaves people with a question or two. The goal of this post is to answer those questions.
First, what CDC function are you entitled to use in the DB2 Advanced Editions? The license is the always final word, but, in simple terms, you can only use the bundled CDC to build disaster recovery solutions where a primary DB2 instance* has up-to-two backup instances. For example, the following replication topology is allowed by the DB2 Advanced Edition licenses:
Furthermore, the disaster recovery use case limits your entitled use of CDC function in the following ways:
The question is - when do you need to buy CDC now? If you want to do anything more than what's described in this post, you'll need to buy IIDR for your DB2 Advanced Editions. The two most common replication configurations that require this are ones where you do either of the following:
If you need to understand more about these examples, we'll have pictures and add a few more examples in a future post that talks about when you need to buy CDC.
Of course, the last question is - can I still build DB2 DR, HA, and Active-Active solutions using the Q Replication built into the DB2 Advanced Editions? Yes, absolutely. The addition of CDC to DB2 does not change this.
* Multiple DB2 instances can be created from a single DB2 install. Each instance can use the bundled CDC to replicate up to the entitled number of backup instances.
For those of you who don't subscribe to the IBM Redbook newsletter, you may have missed last week's announcement of a new Redbook titled Implementing IBM InfoSphere Change Data Capture for DB2 z/OS V6.5. It is a exellent extension of the brief CDC z/OS sections found in last year's Redbook titled Co-locating Transactional and Data Warehouse Workloads on System z. This new Redbook provides information about installing, configuring, running, and tuning CDC for DB2 z/OS. Read it if you need it and don't forget to rate it (no one will cry if you give it 5 stars :)
Now that IBM has packaged its major data replication technologies into a single product, InfoSphere Data Replication, a lot of people are asking what they can take advantage of that they couldn't with the older products (InfoSphere CDC and InfoSphere Replication Server). Other than the obvious point of having access to multiple technologies, you can now use IBM's table compare utility, asntdiff, with CDC. asntdiff is a general-purpose utility that compares the data from two queries. IBM provides it through several product - Replication Server, the IBM Data Server Client, and all editions of DB2 and InfoSphere Warehouse.*
Long-time CDC users may ask what's happening to CDC's differential refresh and why they would want to use asntdiff instead of differential refresh. First understand that differential refresh is alive and well and it's not going anywhere :) asntdiff is just an option available to you.
To understand when you might want to use asntdiff, understand the basics of how it works.
So, the first reason to consider asntdiff is times when differential refresh's restrictions could be overcome by writing queries to get the result sets you need. For example, asntdiff may be an alternative if one of the following differential refresh restrictions applies to your replication configuration:
Next, asntdiff is independent of data replication and can be started from a command line. Among other things, this means:
One major point to be aware of with asntdiff is how it works with heterogeneous data. For example, when you want to compare data being replicated from Oracle to DB2. asntdiff was originally written for DB2 databases. As a result, it requires IBM data federation technology to query databases such as Oracle. The good news is that InfoSphere Data Replication provides data federation for use with data replication configurations.
If you're not familiar with asntdiff and want to give it a try, see the ChannelDB2.com blog post titled Compare the Rows of Two Tables. If you have questions, feel free to post them in the CDC message board here on developerWorks.
* Yes, technically, you could already use asntdiff with CDC on UNIX or Window since it comes in so many IBM products on UNIX and Windows. However, if you wanted to use it on z/OS, you could only get it through Replication Server. It's now in InfoSphere Data Replication as well.
DavidT 120000JC6D Tags:  cdc change_data_capture replication data_replication infosphere 4,987 Views
Over the next month or so, we'll be updating the look of the CDC Forum and adding content. For example, you may have noticed we added a data replication icon and a wiki widget. More is in store. If you have requests, feel free to post a comment to this blog post. No guarantees, but we'll do what we can :)
Blog Post by : Davendra Paltoo, Offering Manager, Data Replication
Follow him on Twitter : https://twitter.com/Davendr18397388
One thing that is common across organizations today is that each one wants to be customer-centric and in order to be so, they need to be insights-driven. Insights-driven firms are growing at an average of more than 30% annually and are on track to earn $1.8 trillion by 2021 predicts Forrester.
These Insights-driven organizations are built on data. In order to have 360-degree view of a customer, organizations need data which is spread across disparate databases and data warehouses. Some data may reside on premise in a IBM DB2 database, or Teradata database or in the cloud in a Microsoft Azure SQL based on business needs.
Irrespective of where your data resides, you need a data replication solution for real time replication requirements in support of your data integration and analytics projects.
To help meet the needs of organizations who make use of Teradata and MS Azure SQL databases, IBM Data Replication Change Data Capture technology now supports targeting Teradata in the latest 11.4 product line. Previously, the CDC apply for Teradata was only available in earlier supported versions.
In addition, CDC is now validated to support targeting Azure SQL databases, which closely resemble Microsoft SQL Server databases, via use of the CDC for Microsoft SQL Server data replication target/apply.
CDC Replication supports Azure SQL Database as a remote target only. The CDC Replication target can either be installed on premises or in an Azure VM. For optimum performance, the CDC Replication target should be installed on a VM in the same region as the Azure SQL Database.
For more information, on our Azure SQL database targeting capability please see our knowledge centre:
For more information on our Teradata apply in 11.4 visit our knowledge centre: