Modified on by DavidBirmingham
Many years ago we encountered an environment where the client wanted the old system refactored into the new. The "new" here being the Netezza platform and the "old" here being an overwhelmed RDBMS that couldn't hope to keep up with the workload. So the team landed on the ground with all hopes high. The client had purchased the equivalent of a 4-rack striper for production and a 1-rack Striper for development. Oddly, the same thing happened here as happens in many places. The 4-rack was dispatched to the protected production enclave and the 1-rack was dropped into the local data center with the developers salivating to get started. And get started they did.
The first team inherited about half a terabyte of raw data from the old system and started crunching on it. The second team, starting a week later, began testing on the work of the first team. A third team entered the fray, building out test cases and a wide array of number-crunching exercises. While these three teams dogpiled onto and hammered the 1-rack, the 4-rack sat elsewhere, humming with nothing to do.
We know that in any environment we encounter, with any technology we can name, the development machines are underpowered compared to the production environment. And while the production environment has a lot of growing priorities for ongoing projects, we don't have this scenario for our first project, do we? Our first project has a primary, overarching theme: it is a huge bubble of work that we need to muscle-through with as much power as possible. That "as much as possible" in our case, was the 4-rack sitting behind the smoked glass, mocking us.
And this is the irony - for a first project we have a huge "first-bubble" of work before us that will never appear again. the bubble includes all the data movement, management and backfilling of structures that we will execute only once, right? Really? I've been in places where these processes have to be executed dozens if not hundreds of times in a development or integration environment as a means to boil out any latent bugs prior to its maiden - and only - conversion voyage. But is this a maiden-and-only voyage? Hardly - typically the production guys will want to make several dry runs of the stuff too. We can multiply their need for dry runs with ours, because we have no intention of invoking such a large-scale movement of data without extensive testing.
And yet, we're doing it on the smaller machine. No doubt the 1-rack has some stuff - but I've seen cases where it might take us two weeks to wrap up a particularly heavy-lifting piece of logic. If we'd done this on the larger 4-rack, we would ahve finished it in days or less. Double the power, half the time-to-deliver (when the time is deliver is governed by testing)
In practically every case of a data warehouse conversion, the actual 'coding' and development itself is a nit compered to the timeline required for testing. I've noted this in a number of places and forms, in that the testing load for a data warehouse conversion is the largest and most protracted part of the effort. And if testing (as in our case) is largely loading, crunching and presenting the data, we need the strongest possible hardware to get past the first bubble. A data conversion project is a "testing" project more so than a "development" project, and with the volumes we'll ultimately crunch, hardware is king.
But I've had this conversation with more people than I can count. Why can't you deploy the production environment with all its power, for use in getting past the first bubble, then scratch the system and deploy for production? What is the danger here? I know plenty of people, some of them vendor product engineers, who would be happy to validate such a 'scratch' so that the production system arrives with nothing but its originally deployed default environment.
Yet another philosophy is that we would pre-configure the machine for production deployment, but nobody likes developers doing this kind of thing in a vacuum. They would rather see deployment/implementation scripts that "promote" the implementation. I'm a big fan of that, too, for the first and every following deployment. That's why I would prefer we used the production-destined system to get past the first-bubble-blues, then scratch it, and get the original environment standing up straight, and only then treat it as an operational production asset.
Most projects like this have a very short runway in their time-to-market, and we do a disservice to the hard-working folks who are doing their best to stand up this environment, They need all the power they can get, especially when they enter the testing cycle.
And for this, it's an 80/20 rule for every technical work product we will ever produce. Take a look sometime at what it takes to roll out a simple Java Bean, or a C# application, or a web site. Part of the time is spent in raw development, and part of it in testing. If I include the total number of minutes spent by the developer in unit testing, and then by hardcore testers in a UAT or QA environment, and it is clear that the total wall-clock hours spent in producing quality technology breaks into the 80/20 rule - 20 percent of the time is spent in development, and 80 percent in testing.
And if the majority of the time is spent in testing, what are we testing on Enzee space? The machine's ability to load, internally crunch and then publish the data. On a Netezza machine, this last operation is largely a function of the first two. But we have to test all the loading don't we? And when testing the full processing cycle we have to load-and-crunch in the same stream, no? What does it take to do this? Hardware, baby, and lots of it.
I can say that multiple small teams can get a lot of "ongoing" work done on a 1-rack, no doubt a very powerful environment. I can also say that a machine like this, for multiple teams in the first-bubble effort, will gaze longingly at the 4-rack in the hopes they can get to it soon, because so much testing is still before them, and they need the power to close.
What are some options to make this work? Typically the production controllers and operators don't like to see any "development" work in the machines that sit inside the production enclosure. They want tried-and-tested solutions that are production-ready while they're running. At the same time, they have no issues with allowing a pre-production instance into the environment because they know a pre-production instance is often necessary for performance testing. Here's the rub: the entire conversion and migration is one giant performance test! So designating the environment as pre-production isn't subtle, nuanced, disingenuous or sneaky - it accurately defines what we're trying to do. It's a performance-centric conversion of a pre-existing production solution, now de-engineered for the Netezza machine. As I noted, development is usually a nit, where the testing is the centerpiece of the work.
With that, Netezza gives us the power to close, to handily muscle-through this first-bubble without the blues - we only hurt ourselves with "policies" for the environment that are impractical for the first-bubble.
This brings us full-circle yet again to a common problem with environments assimilating a Netezza machine. The scales and protocols put pressure on policies, because those policies are geared for general-purpose environments. There's nothing wrong with the policies, they protect things inside those general-purpose environments. But the same policies that protect things in general-purpose realm actually sacrifice performance in the Netezza realm. Don't toss those policies - adapt them.
Modified on by DavidBirmingham
I hear a lot of feedback on the use of CDC to put data into a PureData for Analytics, Powered By Netezza Technology device. In the other machines (traditional database engines) the data flies into the box, the CDC is on-and-off the machine in seconds. But in my Netezza machine, the CDC seems to grind. I have it running every fifteen minutes, they say, and the prior CDC instance is still running when the next instance kicks off. This is totally unacceptable. Maybe we shouldn't be using CDC for this?
Or maybe they just don't have it configured correctly?
There are two major PDA principles in play here. One is strategic and the other is tactical. Many people can look at the tactical principle and accept it because it is testable, repeatable and measurable. The strategic one however, they will hold their judgment on because it does not fit their paradigm of what a database should do. I'll save the strategic one for last, because its implications are further reaching.
The CDC operation will accumulate records into a cache and then apply these at the designated time interval. This micro-batch scenario fits Netezza databases well. The secondary part of this is that the actual operation will include a delete/insert combination to cover all deletes, updates and inserts. So when the operation is complete, the contents of the Netezza table will be identical to the contents of the source table at that point in time (even though we expect some latency, that's okay).
The critical piece is this: An update operation on a Netezza table is under-the-covers a full-record-delete and full-record-insert. It does not update the record in place. A delete operation is just a subset of this combination. This is why the CDC's delete/insert combination is able to perfectly handle all deletes, updates and inserts. The missing understanding however, is the distribution key.
If we have a body of records that we need to perform a delete operation with against another, larger table, and the larger table is distributed on RANDOM, think about what the delete operation must do in a mechanical sense. It must take every record in the body of incoming records and ship it to every SPU so that the data is visible to all dataslices. It must do this because the data is random and it cannot know where to find a given record to apply the operation - it could literally be anywhere and if the record is not unique, could exist on every dataslice. It's random after all. This causes a delete operation (and by corollary an update operation) to grind as it attempts to locate its targets.
Contrast this to a table that is distributed on a key, and we actually use the key in the delete operation (such as a primary key). The incoming body of records is divided by key, and only that key's worth of data is shipped to the dataslice sharing that key - the operation is lightning-fast. This is why we say - never, ever perform a delete or update on a random table, or on a table that doesn't share the distribution key of the data we intend to affect. Deletes and Updates must be configured to co-locate, or they will grind.
Now back to the CDC operation. Whenever I hear that the CDC operation is grinding, my first question is: Do you have the target Netezza tables distributed on the same primary keys of the source table? The answer is invariably no (we will discover why in a moment). So then I ask them, what would it take to get the tables distributed on the primary key? How much effort would it be? And they invariably answer, well, not much, but it would break our solution.
Why is that?
Because they are reporting from the same tables that the CDC is affecting. And when reporting from these tables, the distribution key has to face the way the reporting users will use the tables, not the way CDC is using the tables. This conversation often closes with a "thank you very much" because now they understand the problem and see it as a shortcoming of Netezza or CDC, but not a shortcoming of how they have implemented the solution.
Which brings us to the strategic principle: There is no such thing as a general purpose database in Netezza.
What are we witnessing here? The CDC is writing to tables that should be configured and optimized for its use. They are not so, because the reporting users want them configured and optimized for their own use. They are using the same database for two purposes because they are steeped in the "normalization" protocol prevalent in general-purpose systems - that the databases should be multi-use or general-purpose.
But is this really true in the traditional databases? If we were using Oracle, DB2, SQLServer - to get better performance out of the data model wouldn't we reconfigure it into a star schema and aggressively index the most active tables? This moves away from the transactional flavor of the original tables to a strongly purpose-built flavor.
Why is it that we think this model is to be ignored when moving to Netezza? Oddly, Netezza is a Data Warehouse Appliance - it was designed to circunscribe and simplify the most prevalent practices of data warehousing - not the least of which - is the principle that there is no such thing as a general-purpose database. In a traditional engine we would never attempt to use transactional tables for reporting - they are too slow for set-based operations and deep-analytics. Yet over here in the Netezza machine, somehow this principle is either set-aside or ignored - or perhaps the solution implementors are unaware of it - and so these seemingly inexplicable grinding mysteries arise and people scratch their heads and wonder what's wrong with the machine.
And again, they never wonder what's wrong with their solution.
If we take a step back, what we will see are reports that leverage the CDC-based tables, but we will see a common theme, which I will cover in a part-2 of this article. The theme is one of "re integration" versus "pre-integration". That is, integration-on-demand rather than data that is pre-configured and pre-formulated into consumption-ready formats. What is a symptom of this? How about a proliferation of views that snap-together five or more tables with a prevalence of left-outer-joins? Or a prevalence of nested views (five, ten, fifteen levels deep) that attempt to reconfigure data on-demand (rather than pre-configure data for an integrate-once-consume-many approach?) Think also about the type of solution that performs real-time fetches from source systems, integrates the data on-the-fly and presents it to the user - this is another type of integration-on-demand that can radically debilitate source systems as they are hit-and-re-hit for the very same set-based extracts dozens or hundreds of times in a day.
I'll take a deep-dive on integration-on-demand in the next installment, but for now think about what our CDC-based solution has enticed us to do: We have now reconfigured the tables with a new distribution key that helps the reports run faster, but because this deviates from the primary-key design of the source tables (which CDC operates against) then the CDC operation will grind. And when it grinds, it will consume precious resources like the inter-SPU network fabric. The grinding isn't just a duration issue - it's inappropriately using resources that would otherwise be available to the reporting users.
What's missing here is a simple step after the CDC completes. Its a really simple step. It will cause the average "purist" data modeler and DBA to retch their lunch when they hear of it. It will cause the admins of "traditional" engines to look askance at the Netezza machine and wonder what they could have been thinking when they purchased it. But the ultimate users of the system, when they see the subsecond response of the reports and way their queries return in lightning fashion compared to the tens-of-minutes, or even hours - of the prior solution, these same DBAs, admins and modelers will want to embrace the mystery.
The mystery here is "scale". When dealing with tables that have tens of billions, or hundreds of billions of records, the standard purist protocols that rigorously and faithfully protect capacity in the traditionl engines - actually sacrifice capacity and performance in the Netezza engine. It's not that we want to set aside those protocols. We just want to adapt them for purposes of scale.
The "next step" we have to take is to formulate data structures that align with how the reporting users intend to query the data, then use the CDC data to fill them. It's not that the CDC product can do this for you. It gets the data to the box. This "next step" in the process is simply forwarding the CDC data to these newly formulated tables. When this happens, the pre-integration and pre-calculation opportunities are upon us, and we can use them to reduce the total workload of the on-demand query by including the pre-integration and pre-calculation into the new target tables. These tables are then consumption-ready, have far fewer joins (and the need for left-outer joins often fall by the way-side). After all, why perform the left-outer operations on-demand if we can perform them once, use Netezza's massively parallel power for it, and then when the users ask a question, the data they want is pre-formulated rather than re-formulated on demand.
This necessarily means we need to regard our databases in terms of "roles". Each role has a purpose - and we deliberately embrace the notion of purpose-built schemas, and deliver our solution from the enslavement of a general-purpose model. The CDC-facing tables with support CDC - we won't report from them. The reporting tables face the user - we won't CDC to them.
Keep in mind that this problem (of CDC to Netezza) can rear its head with other approaches also - such as streaming data with a replicator or ETL tool to simulate the same effect of CDC. Either way, the data arrives in the Netezza machine looking a lot like the source structures and aren't consumption-ready.
I worked with a group some years ago with a CDC-like solution, and they took the "next step" to heart, formulated a set of target tables that were separate from staging and then used an ETL tool to fill them. The protocol was simply this: The ETL tool sources the data and fills the staging tables, then the ETL sources the staging tables and fills the target tables. This provided the necessary separation, so functionally fulfilled the mission. The problem with the solution however, was that for the transformation leg, the ETL tool was yanking the data from the machine into the ETL tool's domain, reformulating it and then pushing it back onto the machine. The data actually met itself coming-and-going over the network. A fully parallelized table was being serialized, crunched and then re-paralellized into the machine. As the data grew, this operation became slower and slower. That's what we would expect right? The bottleneck now is the ETL tool. The proper way to do this, if an ETL tool must be involved, is to leverage it to send SQL statements to the machine, keep the data inside the box. The Netezza architecture can process data internally far faster than any ETL tool could ever hope - so why take it out and incur the additional penalty of network transportation?
The ETL tool aficionados will balk at such a suggestion because it is such a strong deviation from their paradigm. But this is why Netezza is a change-agent. It requires things that traditional engines do not because it solves problems in scales that traditional engines cannot. In fact, performing such transformations inside a traditional engine would be a very bad idea. The ETL tools are all configured and optimized to handle transformation one way - outside the box. This is because it is a general-purpose tool and works well with general-purpose engines. There is a theme here: the phrase "general purpose" has limited viability inside the Netezza machine. If we embrace this reality with a full head of steam, the Netezza technology can provide all of our users with a breathtaking experience and we will have a scalable and extensible back-end solution.
Modified on by DavidBirmingham
How many logical modelers does it take to screw in a lightbulb? None, it's a physical problem.
I watched in dismay as the DBAs, developers and query analyts threw queries at the machine like darts. They would formulate the query one way, tune it, reformulate it. Some forms were slightly faster but they needed orders-of-magnitude more power. Nothing seemed to get it off the ground.
Tufts of hair flew over the cubicle walls as seasoned techologists would first yelp softly when their stab-at-improvement didn't work, then yelp loudly as they pulled-out more hair. Yes, they were pulling-their-hair-out trying to solve the problem the wrong way. Of course, some of us got bald the old-fashioned way: general stress.
I took the original query as they had first written it, added two minor suggestions that were irrelevant to the functional answer to the query, and the operation boosted into the stratosphere.
What they saw however, was how I manipulated the query logic, not how I manipulated the physics. I can ask for a show of hands in any room of technologists and get mixed answers on the question "where is the seat of power?". Some will say software, others hardware, others a mix of the two, while those who still adhere to the musings of Theodoric of York, Medieval Data Scientist, would say that there's a small toad or dwarf living in the heart of the machine.
To make it even more abstract, users sit in a chair in physical reality. They live by physical clocks in that same reality, and "speed of thought" analytics is only enabled when we can leverage physics to the point of creating a time-dilation illusion: where only seconds have passed in the analyst's world while many hours have passed in reality. After all, when an analyst is immersed in the flow of a true speed-of-thought experience, they will hit the submit-key as fast as their fingers can touch the keyboard, synthesize answers, rinse and repeat. And do this for many hours seemingly without blinking. If the machine has a hiccup of some kind, or is slow to return, the illusion-bubble is popped and they re-enter the second-per-second reality that the rest of us live in. Perhaps their hair is a little grayer, their eyes a little more dilated, but they will swear that they have unmasked the Will-O-The-Wisp and are about to announce the Next Big Breakthrough. Anticipation is high.
But for those who don't have this speed-of-thought experience, chained to a stodgy commodity-technology, they will never know the true meaning of "wheels-up" in the analytics sense. They will never achieve this time-dilated immersion experience. The clock on the wall marks true real-time for them, and it is maddening.
Notice the allusions to physics rather than logic. We don't doubt that the analyst has the logic down-cold. But logic will not dilate time. Only physics can do that. Emmett Brown mastered it with a flux capacitor. We don't need to actually jump time, but a little dilation never hurt anybody.
The chief factor in query-turnaround within the Netezza machine is the way in which the logical structures have been physically implemented. We can have the same logical structure, same physical content, with wildly different physical implementations. The "distribute on" and "organize on" govern this factor through co-location at two levels: Co-location of multiple tables on a common dataslice and co-location (on a given dataslice) of commonly-keyed records on as few disk pages as possible (zone maps). The table can contain the same logical and physical content, but its implementation on Netezza physics can be radically different based on these two factors.
Take for example the case of a large-scale fund manager with thousands of instruments in his portfolio. As his business grows, he crosses the one-million mark, then two million. His analytics engine creates two million results for each analytics run, with dozens of analytics-runs every day, adding up quickly to billions of records in constant churn. His tables are distributed on his Instrument_ID, because in his world, everything is Instrument-centric. All of the operations for loading, assimilating and integrating data centers upon the Instrument and nothing else. They are organized on portfolio_date, because the portfolio's activity governs his operations.
His business-side counterpart on the other hand, sells products based on the portfolio. The products can serve to increase the portfolio, but many of the products are analytics-results from the portfolio itself. This is a product-centric view of the data. Everything about it requires the fact-table and supporting tables to be distributed on the Product_id plus being organized on the product-centric transaction_date. This aligns the logical content of the tables to the physics of the machine. It also aligns the contents of the tables with the intended query path of the user-base. One of them will enter-and-navigate via the Instrument, where the other will use the Product.
We can predict the product manager's conversation with the DBAs:
PM: "I need a version of the primary fact table in my reporting database."
DB: "You mean a different version of the fact? Like different columns?"
PM: "No, the same columns, same content."
DB: "Then use the one we have. We're not copying a hundred billion rows just so you can keep your own version."
PM: "Well, it's logically the same but the physical implementation is completely different."
DB: "Oh really? You mean that instead of doing an insert-into-select-from, we'll move the data over by carrier pigeon?"
PM: (staring) "No, the new table has a different distribution and organize, so it's a completely different physical table than the original"
DB: "You're just splitting semantic hairs with me. Data is data."
I watched this conversation from a healthy distance for nearly fourteen months before the DBA acquiesced and installed the necessary table. Prior to this, the PM had been required to manufacture summary tables and an assortment of other supporting tables in lieu of the necessary fact-table. The user experience suffered immensely during this interval, many of them openly questioning whether the Netezza acquisition had been a wise choice. But once the new distribution/organize was installed, user-queries that had been running in 30 minutes now ran in 3 seconds. Queries that had taken five minutes were now sub-second. Where before only five users at a time could be hitting the machine, now twenty or more enjoyed a stellar experience.
How does making a copy of the same data make such a difference? Because it's not really a copy. When we think "copy" we think "photocopy", that is "identical". A DBA will rarely imagine that using a different distribution and organize will create a version of the table that is, in physical terms, radically different from its counterpart. They see the table logically, just a reference in the catalog.
The physics of the Netezza machine is unleashed with logical data structures that are configured to leverage the physical power of the machine. Moreover, the physical implementation must be in synergy (and harmony) with how the users intend to consume them with logical queries. In the above case, the Instrument-centric consumer had a great experience because the tables were physically configured in a manner that logically dovetailed with his query-logic intentions. The Product-centric manager however, had a less-than-stellar experience because that same table had not been physically configured to logically dovetail with his query-logic intentions. The DBA had basically misunderstood that the Netezza high-performance experience rests on the synergy between the logical queries and physical data structures.
In short, each of these managers required a purpose-built form of the data. The DBA thinks in terms of general-purpose and reuse. To him, capacity-planning is about preserving disk storage. He would never imagine that sacrificing disk storage (to build the new table) would translate into an increase in the throughput of the machine. So while the DBA is already thinking in physical terms, he believes that users only think in logical terms. Physics has always been the DBA's problem. Who do those "logical" users think they are, coming to the DBA to offer up a lecture on physics?
In this regard, what if the DBA had built-out the new table but the PM's staff had not included the new distribution key in their query? Or did not leverage the optimized zone-maps as determined by the Organize-On? The result would be the same as before: a logical query that is not leveraging the physics of the machine. At this point, adding the distribution key to the query, or adding filter attributes, is not "tuning" but "debugging". Once those are in place, we don't have to "tune" anything else. Or rather, if the data structures are right, no query tuning is necessary. If the data structures are wrong, no query tuning will matter.
And this is why the aforementioned aficionados were losing their hair. They truly believed that the tried-and-true methods for query-tuning in an Oracle/SQLServer machine would be similar in Netezza. Alas - they are not.
What does all of this mean? When a logical query is submitted to the machine, it cannot manufacture power. It can only leverage or activate the power that was pre-configured for its use. This is why "query-tuning" doesn't work so well with Netezza. I once suggested "query tuning in Netezza is like using a steering wheel to make a car go faster." The actual power is under the hood, not in the user's hands. While the user can leverage it the wrong way, the user cannot, through business-logic queries, make the machine boost by orders-of-magnitude.
Where does the developer/user/analyst need to apply their labor? They already know how they want to navigate the data, so they need to work toward a purpose-built physical implementation, using a logical model to describe and enable it. Notice the reversal of roles: the traditional method is to use a logical model to "physicalize" a database. This is because in a commodity platform (and a load-balancing engine) the physics is all horizontal and shared-everything. We can affect the query turnaround time using logical query statements because we can use hints and such to tell the database how to behave on-demand.
We cannot tell Netezza how to "physically" behave on-demand in the same way. We can use logical query statements to leverage the physics as we have pre-configured it, but if the statement uses the tables outside of their pre-configured physics, the user will not experience the same capacity or turnaround no matter how they reconfigure or re-state the query logic.
All of this makes a case for purpose-built data models leading to purpose-built physical models, and the rejection of general-purpose data models in the Netezza machine. After all, it's a purpose-built machine quite unlike its general purpose, commodity counterparts in the marketplace. In those machines (e.g. Oracle, SQLServer) we have to engineer a purpose-built model (such as a star-schema) to overcome the physical limitations of the general-purpose platform. Why then would we move away from the general-purpose machine into a purpose-built machine, and attempt to embrace a general-purpose data model?
Could it be that the average Netezza user believes that the power of the machine gives it a magical ability to enable a general-purpose model in the way that the general-purpose machines could not? Ever see a third-normal-form model being used for reporting in a general-purpose machine? It's so ugly that they run-don't-walk toward engineering a purpose-built model, photocopying data from the general-purpose contents into the purpose-built form. No, the power of the Netezza machine doesn't give it magical abilities to overcome this problem. A third-normal form model doesn't work better in Netezza than a purpose-built model.
Enter the new solution aficionado who wants their solution to run as fast as the existing solution. They will be told, almost in reflex by the DBA that they have to make their solution work with the existing structures, even though they don't leverage physics in the way the new solution will need it. And this is the time to make a case for another purpose-built model. One that faces the new user-base with tables that are physically optimized to support that user base. Will all tables have to come over? Of course not. Will all of the data of the existing fact table(s) have to come over? Usually not, which is silver lining of the approach.
But think about this: The tables in Netezza are 4x compressed already. If we make another physical copy of the table, itself being 4x compressed, the data is still (on aggregate) 2x compressed across the two tables. That is, the data is doubled at 4x compression, so it only uses the same amount of space as the original table would have if it were only 2x compressed. In this perspective, it's still ahead of the storage -capacity curve. And in having their physics face the user base, we preserve machine capacity as well.
This is perhaps the one most-misunderstood tradeoff of requiring multiple user bases to use the same tables even though their physical form only supports one of the user-bases. And that is simply this: When we kick off queries that don't leverage the physics, we scan more data on the dataslices and we broadcast more data between the CPUs. This effectively drags the queries down and saturates the machine. The query drag might be something only experienced by the one-off user base, but left to itself the machine capacity saturation will affect all users including the ones using the primary distribution. Everyone suffers, and all for the preservation of some disk space. Trust me, if there is a question between happy and productive users versus burning some extra disk space, it's not a hard decision. Preserving disk storage in the heat of unhappy users is a bad tradeoff.
Or to make an absurd analogy, let's say we show up for work on day one, have a great day of onboarding and when we leave, we notice that our car is a little "whiney". Taking it to a shop, he tells us that someone has locked the car in first-gear and he can't fix it. We casually make this complaint the next day (it took us a little longer to get to work).
DBA: Oh sure, all new folks have their car put in first gear. It's a requirement.
US: (stunned) What the?
DBA: Well, if you had been here first, you could keep all the gears, but everyone we've added since then has to be in first gear for everything.
DBA: Yes, first-gear for your car, your development machine, even your career ladder. About the only thing that they don't put in first-gear are your work hours. Those are unlimited.
US: That's outrageous!
DBA: We can't give everyone all the gears they want. It's just not scalable.
The problem with working with tables that aren't physically configured as-we-intend-to-use-them is that using them will cause the machine to work much harder than it has to. Not only will our queries be slower, we can't run as many of them. And while we're running, those folks with high-gear solutions in the same machine will start to look like first-gear stuff too. The inefficiency of our work will steal energy from everyone. We cannot pretend that the machine has unlimited capacity. If our solution eats up a big portion of the capacity then there's less capacity for everyone else. Even if we use workload management, whatever we throttle the poorly-leveraged solution into will only make it worse, because if a first-gear solution needs anything, it most certainly uses more capacity than it would normally require.
Energy-loss is the real cost of a poor physical implementation. All solutions start out with a certain capacity limit (same number of CPUs, memory, disk storage) and it is important that we balance these factors to give the users the best possible experience. Throttling CPUs or disk space, or refusing to give up disk space merely to preserve disk capacity, only forestalls the inevitable. The solution's structures must be aligned with machine physics and the queries must be configured to leverage that physics.
The depiction(above) describes how the modeler's world (a logical world) in no wise intersects with the physical world, yet the physical world is what will drive the user's performance experience. The high-intensity physics of Netezza is not just something we "get for free", it is a resource we need to deliberately leverage and fiercely protect.
In the above, the "Logical data structure" is applied to the machine catalog (using query logic to create it). But once created, it doesn't have any content, so we will use more logic to push data into the physical data structure. The true test of this pairing is when we attempt to apply a logical query (top) and it uses the data structure logic/physics to access the machine physics (bottom). Can we now see why a logical query, all on its own, cannot manufacture or manipulate power? It is the physical data structure working in synergy with the logical query that unleashes Netezza's power. And this is why some discussions with modelers may require deeper communication about the necessity to leverage the deep-metal physics while we honor and protect the machine's power.
Modified on by DavidBirmingham
For the past many months I have been diligently updating and upgrading the original 2008 Netezza Underground to address the many features of TwinFin, Striper and other offerings from IBM. I have recently been notified that it has passed final edit and is available on Amazon.com.
All I can say is "whew!" and many thanks to those who helped put it together. It's been a whirlwind.
Here is the URL
When I started the project I realized that a big part of the original book remains timeless. I didn't leave it "as is" though - practically every page and all the chapters have new material, case studies and such. I peppered the book with some additional graphics since the intrinsic points require a bit more reinforcement than mere words will suffice.
The original chapter on "Distribution Stuff" is now "Performance Stuff" and is twice as long, covering the various aspects of setting up tables, troubleshooting, page-level zone maps and a lot more.
Fortunately, this time around there is a better mechanism to contact me if you have questions or want to report any errata (hey, it could happen!) - you can reach me through this blog, on linked-in or directly through my primary email address at Brightlight Consulting:
Modified on by DavidBirmingham
In a Netezza shop experiencing some performance stress with their machine, we ask the usual questions as to the machine's configuration, its functional mission. Ultimately we pop-the-hood to find that the data structures and the queries are not in harmony. For starters, the structures don't look like Netezza structures, at least, not optimized for Netezza. We receive feedback that they "just" moved the data from their former (favorite technology here) and ran-with-it. They received the usual 10x boost as a door-prize and thought they were done. Lurking in their solution however, were latent inefficiencies that were causing the machine to work 10x to 20x harder to achieve the same outcome. And their queries were likewise 20x inefficient in how they leveraged the data structures.
More unfortunately, the power of the machine was masking this inefficiency. It's like the old adage, when a person first starts day-trading on the stock exchange, the worst thing that can happen to them is that they are successful. Why? It put a false sense of security in their minds that gives them permission to take risks they would never take if they knew the real rules of the game. The 10x-boost for moving the data over is a "for-free" door prize not the go-to configuration.
What are the real rules of the Netezza game? The first rule is that extraordinary power masks sloppy work. Netezza can make an ugly duckling look like a swan without actually being one. It can make an ugly model into a supermodel without the necessary adult beverages to assist the transformation. It can make sloppy queries look like something even Mary Poppins would approve of, practically perfect in every way and all that.
What's lurking under-the-hood is nothing short of a parasitic relationship between the model, the queries and the machine. We received the 10x boost door-prize and think we have succeeded. But we have only succeeded in instantiating the model and its data into the machine. We have not succeeded in leveraging the entire machine. And, uh, we paid for the entire machine. So why aren't we using it?
In our old environment, the index structures worked behind-the-scenes, transparently assisting each join. Our BI environment is set up to leverage those joins so we get good response times. The Netezza machine has no indexes so the BI queries (whether we want to admit it or not) are improperly structured to take advantage of the machine's physics.
"But that's how we've always done it..." or "But we don't do it that way..."
The short version, the former solution and (favorite technology here) is casting a long shadow across the raised floor onto the Netezza machine. People are forklifting "what they know" to the new machine when very little of it applies.
For example, in a star schema, the index structures are the primary performance center. The query will filter the dimensions first, gather indexes from the participating dimensions and then use these to attack the fact table. The engine does all this transparently. The result is a fast turnaround born on index-level performance. These are software-powered constructs in a general-purpose engine. The original concept of the star-schema was borne on the necessity of a model that could overcome the performance weaknesses of its host platform. It is in fact an answer to the lack-of-power of commodity platforms. In short, just by configuring and loading a star schema on a commodity platform, we get boost from using it over a more common 3NF schema.
The Netezza machine doesn't have indexes. So the common understanding of how a star-schema works doesn't apply. At all. Don't get me wrong, the star-schema has a lot of functional elegance and utility. It does not however, inherently provide any form of performance boost for queries using it. It can simplify the consumer experience and certainly ease maintenance, but it is not inherently more performant than any other model. In fact, using such a model by default could hinder performance.
Why is this?
The primary performance boosters in Netezza are the distribution and the zone map. Where the distribution and co-location preserve resources so that more queries can run simultaneously with high throughput, zone maps boost query turnaround time. They work in synergy to increase overall throughput of the machine. How does installing a star-schema inherently optimize such things? It doesn't.
Can we use a star-schema? Sure, and we should also commit to distributing the fact table on the same key as the most-active or largest dimension (they are often one-and-the-same). This will preserve concurrency for the largest majority of queries. A better approach however, is to specifically formulate a useful dimensional model that leverages the same distribution key for all participating tables. Common star-schemas do not do this by default, and if only two tables are distributed on the same key, all other joins to the other tables will be less performant. They will have to "broadcast" the dimensional data to the fact table. Clearly having all tables distributed on the same key will preserve concurrency, but this doesn't give us the monster-boost we're looking for. Distrubution might get us up to 2x past the door-prize performance we get from moving to the machine. Zone maps are notorious for getting us 100x and 1000x boost.
At one site I watched as several analytic operations remanufactured the star-schema data into several other useful structures, each of which was distributed on a common key. At the end of the operation, these quere joined in co-located manner and the final result came back in orders-of-magnitude faster than the same query on the master tables. I asked where they had derived the key, and they explained that it was a composite key that they had reformulated into a single key because their dimensional tables could all be distributed on it and maintain the same logical relationship. Looking over the table structures, they had a "flavor" of a star schema but certainly not a purist star. The question remained, if the existing star schema wasn't useful to them but their reformulated structure was, why weren't they using the reformulated one as the primary model and ditch the old one? The answer was simple, in that the existing star was seen as a general-purpose model and not to be outfitted or tuned for a specific user group. This is one of the commodity/general-purpose lines-of-thought that must be buried before entering the Netezza realm.
This is the primary takeaway from all that: The way we make an underpowered machine work faster is is to contrive a star schema that makes the indexes work hard. We forget that the star schema is a performance contrivance in this regard. If we attempt to move this model to the Netezza machine because "it's what we do" then we may experience performance difficulties rather than a boost. A common theme exists here: people do what they are knowledgeable of, what they are comfortable with, what they find easy-to-explain and do not naturally push-the-envelope for something more useful and performant.
In Netezza, the star schema has functional value but (configured wrong) is a performance liability. We can mitigate this problem by simply reformulating the star to align with the machine's physics, and by adapting our "purist" modeling practices to something more practical and adaptable. After all, many modeling practices are in place specifically because doing otherwise makes a traditional platform behave poorly. If we forklift those practices to Netezza, we participate in casting-the-long-shadown of an underperforming platform onto the Netezza machine.
We have enormous freedom in Netezza to shape the data the way we want to use it and make it consumption-ready both in content and performance. We should not move from a general-purpose platform (using a purpose-built model like a star) into a purpose-built platform with a general-purpose model like a star. The odd part is that the star is an anomaly in a load-balancing, traditional database, but is seen as purpose-built for that platform. Exactly the opposite is true in Netezza. The machine is purpose-built and the star is only another general-purpose model that doesn't work as well as a model that is purpose-built for Netezza physics and for user needs.
The worst thing we can do of course is think-outside-the-box (the Netezza box). We really need to think-inside-the-box and shape the data structures and queries to get what we want. This mitigates the long-shadows. It's just a matter of adapting traditional thinking into something practical for the Netezza machine.
Modified on by DavidBirmingham
About a year ago I engaged to assess a Netezza-centric data processing environment. They had used stored procedures to build-out their business processing inside the machine using SQL-transforms. As you know, I'm a big fan of the SQL-transforms approach, but I'm not a big fan of how they implemented it. Stored procedure for back-end processing are a bad idea on any platform. But even if they had done it without stored procs, the implementation was a "total miss". I mean, it could not have been more "off" if they'd done it outside the machine entirely.
I received word some months ago that while their shop remains a strong Netezza environment, for this particular application they intended to go in a different direction, with a different technology. This was unfortunate since I had told them exactly what the problem was - not the hardware but the way it had been deployed. But they were in denial! Forklifting their application onto the new machine, they attempted to tweak and tune it. They actually received marginally more lift at the outset, but then it rapidly degraded when more data started arriving. Now I'm in dialog with them to discuss "what went wrong".
What went wrong began, quite literally, many years prior.
It's like this: If rust starts to build in a water pipe, we won't know it until the water pressure starts to slowly degrade. Eventually it becomes a drip and then one day it's closed off altogether. We could attempt tracing it to a single cause, but it would only be another straw on the proverbial camel's back. What "really" happened was that we treated the machine in a sloppy manner. Or rather, we saw that it had incredible power but we weren't particularly good stewards of it. Netezza makes a an ugly model look great, a good model look stellar, a marginal model look like a superstar, and can make the sloppiest query look like the most eligible bachelor in town. Power tends to make people starry-eyed.
Time and again we coach people on a migration. They say "Wow, we just went from a five-hour query on that Oracle machine to a five-minute query on the Netezza machine. Sold!" and they move everything over "as-is" from the other machine. Never mind that those old data structures were optimized for a different technology entirely and never mind that the data processes running against them were likewise optimized with the older structures in mind. They were both optimized in context of a machine that could not handle the load to begin with. They just didn't know it yet. Now standing in the Netezza machine's shadow, it's painfully obvious what shortcomings the old machine had. Not the least of which being a load-balancing transactional engine, which is always the wrong technology for anything using a SQL-transform.
The bottom line: what if just a little tuning of that five-minute query could make it a five-second query? What if we received a 10x boost moving data "as is" from the old machine, but if we had engaged a little data-tuning we could have received 100x? In short, how many "x" have we left on the cutting-room floor? Enzees have learned (some the hard way!) that performance in a Netezza machine is found in the hardware. This hardware has to actually arrive in massively parallel form, not marginally parallel form. So we know that that expecting production performance from the Emulator or the TwinFin-3 is a quixotic existence. This ultimately leads to two universal maxims:
We don't tune queries, we configure data structures. The data structures unlock hardware power.
We use queries to activate the data structures. In Netezza, "query-tuning" is a lot like using a steering wheel to make the car go faster. It just doesn't work that way.
This "additional boost" or "leftover power" is an important question, especially for the aforementioned Netezza-centric application. Even if we had kept the entire application in stored procedures, their implementation could not have been more wrong. They had of course, outsourced the whole development project to a firm in a distant country, who had given them a marginal development team at best. This team proceeded to treat the Netezza machine like "any other database" and completely missed the performance optimizations that make one of these machines a source of legend.
What that team did, was pull two hundred million records from a master store and use this body as a working data set even though only twenty columns were being processed at any given point. Dragging over two-hundred columns (90 percent dead weight) through every processing query (many dozens of them), and without regarding distribution to manage co-located reads and co-located writes, turned a twenty-minute operation into a fifty-five hour operation. We showed them with a simple prototype how a given fifteen hour process could be reduced to four minutes. The point is, they were ridiculously inefficient in the use of the machine. Nobody in the leadership of the company would accept that they were as much as 20x inefficient.
A major "miss" is in believing that Netezza is a traditional database. It is not. It is an Asymmetric Massively Parallel Processor (AMPP) with a database "façade" on the front end. Anything resembling a "database" is purely for purposes of interacting with the outside world, "adapting" the MPP layer for common utility. This is why it is firmly positioned as an "appliance". If the internal workins' of the machine were directly exposed, it would cause more trouble than not. Interfacing to the MPP "as a database" is where the resemblance ends. This is the first mistake made by so many new users. They plug-in their favorite tools and such, all of which interface (superficially) just fine. Then they wonder why the machine doesn't do what they wanted. Or that they are experiencing the legendary performance.
When an inefficient model is first deployed, we could imagine that even in taking up 10x more machine resources than necessary, it still runs with extraordinary speed. But let's say we have 100 points of power available to us. The application requires at least five points of power but we are running at 50 points of power (10x inefficient). We still haven't breached any limits. As data grows and as we add functionality, this five points of power rises to 8 points, where we are now using 80 points of power in the machine. Wow, that 100 points of power is getting eaten up fast. We're not all that far away from breaching the max. But data always grows and functionality always rises, and one day we breach the 10th point of power. And at 10x inefficiency, we have finally hit the ceiling of the machine. It spontaneously starts running slow. All the time. Nobody can explain it.
The odd thing, is that the Netezza machine is a purpose-built appliance. Why then did we allow our people to migrate a schema optimized for a general-purpose machine into a purpose-built machine? Moreover, why did we continue to maintain that the so-called purpose-built model in the old machine was really a general-purpose model in disguise? Did we use general-purpose techniques? Why?
Did we load data into one set of structures expecting them to be the one-stop-shop for all consumers? A common-mistake in Netezza-centric implementations is that one data structure can serve many disparate constituents. The larger the data structure, the more we will need to configure the structure for a constituent's utility, and may need redundant data stores to serve disparate needs. Is this reprehensible? Which is better? Just declare another identical table with a different distribution/organize and then load the two tables simultaneously? If we go the summary-table route, the cost is in maintaining the special rules to build them along with the latency penalty for their construction. It seems counter-intuitive to just re-manufacture a table, but the only cost is disk space. On these larger platforms, preserving disk space while the users are at-the-gates with spears and torches, doesn't seem to be a good tradeoff.
The point: Don't waste an opportunity to build exactly the data model you need to support the user base. Don't settle for a contrived, purist, general-purpose model. If the modelers say "we don't do that", this is a sure sign that we're leaving something very special on the cutting-room-floor. It's a purpose-built machine, so create a purpose-built model, and like the Enzees say, "give the machine some love."
When capacity seems to be topping-off, with a few, simply-applied techniques we can easily recover that capacity. It's just very annoying that it's caught up with us and nobody can seem to explain why. It's because they are looking in the wrong place. If we had concerned ourselves with the mechanics of the machine and its primary power-brokers, the distribution and the zone-maps, and avoided the most significant sources of drain, like nested views and back-end stored procedures, we might be closer to resolution. If not, it may be that resolution would require rework or retrofit. In the above 50+ hour operation, the only answer would be to overhaul the working queries end-to-end. We wouldn't need to do much to the functional mechanics, just streamline the way the queries perform them.
What does this streamlining look like? Well, if we already knew that, we wouldn't be having any problems. We would have been streamlining all along and most of our capacity would still be well-preserved. People do it all the time.
Symptoms of a PDA system under stress:
The thing is slowing down and we haven't changed anything. It's slowing down and we're doing what we've always done.
It's the last application/table/load we implemented. Things went south from there. But then we backed out the application and it's still bad. I think we broke something. It must be the hardware.
More users are querying the machine than ever before. I think we've reached a hardware limit.
We could not get the base tables to return fast enough, so we built summary tables, but these are pain to maintain and we don't like the latency in their readiness. We were told that we would never have to use these.
It's sort of funny how deterministic the machine is. "We've been doing the same thing all along" and now it's not working right? Perhaps we weren't doing the right thing all along, regardless of how consistent our "wrongness" was? This is how we know it's not a hardware problem. In fact, if our folks are blaming the hardware first, it's the first sign of denial that the implementation itself is flawed. If our people build contrived structures like summaries, it's a sure sign that the data model is flawed. It's also a sure sign that we're trying to implement a general-purpose schema rather than a purpose-built one. If our people spend a lot of time swarming around query-tuning, it's a sure sign that our data structures aren't ready for consumption. Nested views never have a good ending in Netezza.
At one site, the users had to link together eight or nine different tables to get a very common and repeatable result. If the users must have the deep-knowledge of these tables and their results are repeatable, we need to take their work and manufacture a set of core tables that require less joining and are more consumption-ready. Consolidation, denormalization and shrinking the total tables in the model are actually performance boosters. Why is that? The more tables are involved in the mix, the more we have to deliberately touch the disk through joining. If we have fewer tables and more data on larger tables, zone maps allow us to exclude whole swaths of the tables altogether. We stay off the disks because the zone maps are optimized for it.
It sure "seems" right to put everything into a third-normal-form and make the model "look like the business", but nobody is reporting on the business. They're analyzing, not organizing. We should be the ones organizing the data for analysis, not requiring the analysts to organize the data "on demand" through piling tables together in their queries.
Modified on by DavidBirmingham
"We're charter members," claimed Bjorn, a tech from across-the-pond, "been working with the stuff for ages."
"Same here," asserted Jack, a DBA from Kansas, "You'd be surprised how fast this thing scoots around in first gear."
"Exactly," said Bjorn, "Those who master the roads in first gear are actually better off. You run at a speed that gets you around but not fast enough that you accidentally run into things."
"So it's a safe speed?" asked the interviewer.
"Indeed," said the pair, almost in unison.
"So what happens when you take it for a spin on the highway?"
The two glanced at each other, then to the interviewer, looked down or elsewhere and then one at a time eventually answered.
"Highway driving is problematic," said Jack. "We'd rather stay on the city roads."
"Yes, city roads," Bjorn agreed, "No need for the highway."
The Director of Integration watched the interview on video and made a smacking sound against his teeth, "Pathetic. We bought the car to drive on the highway most of the time. These guys are acting like a couple of children who are scared of the Big Bad Freeway."
"Well, it has too many lanes in it," smirked his assistant, "If they go on the highway, they might actually get somewhere."
"What's that logo on their shirts?" the Director noted, "Zoom in on that -"
"It's FGA," said the assistant.
"Is that a misspelling? I thought the machine used an FPGA?"
"Oh no, that's correct. It's the First Gear Association. But now they call themselves the First Gear Society. It's way past a club. Now it's a philosophy. Or maybe culture is a better word."
"You mean they actually run around justifying why they stay in first gear?"
"It's almost like a discipline sir," grinned the assistant, "They have rules and protocols for their followers. It's cultish if you ask me."
"I didn't ask you."
"So what are some of these so-called protocols?"
"Well for starters, they can't stand deep-metal. It's like garlic to a vampire."
"But deep-metal is - " he sighed, "Never mind, just keep going."
"If they find themselves going too slow, they try to get the machine to go faster in first gear. If they can't they blame the machine. They think that having a powerful machine is good enough. After all, a couple-hundred horsepower under the hood looks good no matter what gear you're in. And to the other chap's point. If you put it into a higher gear, it'll go so fast that it's hard to steer. They aren't very good at steering, so - "
"So it's a fear thing?"
"Not so much. They like rollercoaster rides, judging from some of their project schedules and deliverables anyhow. They like the whole livin-on-the-edge brinksmanship. As long as someone else is driving."
"Ahh, so just afraid to punch the accelerator themselves, eh?"
"They'll punch it, just in first gear. It's almost like any gears higher than that are a fearful thing."
"How do we get them into the deep-metal? It can't be that hard."
"Oh they go into the deep-metal on expeditions and stuff. They like popping the hood and exploring the architecture. But when they get behind the wheel, it's a first-gear-only driving experience."
"So tell me what to look for in a First-Gear-Society member. What can I expect?"
"Here's a short list," the assistant accessed his handheld and pulled an image onto its screen, showing it to the Director.
"Let me see if I understand this -"
Common symptoms are:
"We were doing just fine until a week or so ago, then everything started to slow down. Jobs are running a lot slower, we're missing all of our deadlines. Has the hardware worn out?"
"We just added some functionality to the solution and two days later the whole machine started to drag. We backed out the solution but the machine is still dragging. I think we broke something. There's a problem with the hardware."
"The machine is having a hardware problem. We've been running these applications for years and then one day everything slowed down. We upgraded to a bigger machine and we didn't get any lift, but a few days later things got worse. A lot worse. This is clearly a hardware problem."
"Wow, they think it's the hardware when they haven't even taken it out of first gear. Amazing."
"Here's the punch line - they honestly believe that they can get more power from the machine if they learn to steer it better."
"No kidding. Take a look at these quotes:"
"We reworked the logic in the queries to tighten things down. Every time we change the query, we get a few percentage points difference in performance, but we need a multiplied boost, like 10x or better."
"We put in summary tables to make things go faster but it didn't help. We have query engineers tightening down the queries so that the join logic is efficient."
"All of our query-tuning has failed. We are at a standstill."
"See all that? They really believe that they can make it go faster from the steering wheel. Like the machine they are sitting in is not the source of power."
"How do we convince them to take it out of first gear?"
"Not sure that there is a way, sir. They are so accustomed to believing that the steering wheel is the place to affect performance that they haven't bothered to examine where the power-plant actually resides."
"Under the hood."
"That's right, the power is in the hardware. The steering wheel can only direct the hardware to the right location, but cannot affect power."
"Well, they can certainly steer it poorly."
"Oh sure, like driving it through mud and all that. But that brings up another issue. Some of them like an extreme challenge, so rather than taking it out of first gear, they try to make the machine go faster by making the gears grind."
"Sure, a grinding gear just seems like it's working hard."
"But they don't see that the friction of the grinding is slowing them down?"
"Not in the least. Look here:"
"We built our tables to provide fast back-end data processing, but the distribution we use for back-end processing doesn't work so well for reporting. Every time they issue a query, it's terribly slow. If we copy the larger tables to another distribution, it makes back-end processing slow but the reporting fast. We can't seem to win here. So we're going to keep the distribution for the back-end and then find a way to build something else for the front end. They want us to make two versions of the big tables, each on different distributions. The experts tell us that this is common and the best thing to do, but it sounds crazy to us."
"See that? They don't even listen to the experts. They would rather grind the gears."
"But all they are saving is disk space. I mean, seriously?"
"Old ways die hard. They would rather preserve disk space and incur the wrath of the users."
"Or preserve disk space and then build-out a convoluted set of summary tables that is twice as hard to maintain."
"Yep, the simple, dumb photocopy of data into another distribution is just too simple. They have a need to engineer."
"Engineering in first gear is not really engineering. It's more like polishing the stick-shift."
"Here's another quote:"
"We have a lot of complex views, and those views join to other views. I've seen EXPLAIN plans for this hit fifty to one-hundred snippets deep. Netezza returns this stuff fast all the time. Only now it doesn't anymore.
"Ahh, so their underpinning tables finally reached a tipping point."
"Yeah, this is funny. They add a ten pound weight to the trunk of the car every day and three hundred days later, and 3000 pounds heavier, the car is starting to run slow. Imagine that."
"Running slow because they have it in first gear."
"Well of course, if they were to use a higher gear, all that weight would be practically weightless."
"Funny how the density of deep metal is a lot like anti-gravity."
"Well, the competition sees these things happening and they say, you know, with that particular vehicle, the more weight you add, the slower it gets. It's just the nature of the machine."
"But that's not true on deep-metal."
"Not at all. We know folks who have tons and tons of weight on the machine but it's light as a feather."
"They're using higher gears and the deep metal together."
"Absolutely. Nobody from the First Gear Society is allowed in their shop. They know better."
"Well that's a problem with nested views. The master query attempts to provide the filter attributes but if the nested view doesn't pass them along, the underpinning tables end up table-scanning."
"And as you know, Netezza is the best table-scanner in the business. It can scan tables, really big tables, in no time flat."
"But it's not supposed to be scanning the tables. It's supposed to be using the zone maps and filter attributes so that it doesn't have to scan the tables."
"Well, exactly, but the people in first gear don't know this. They can't really tell that their queries are getting fractionally slower with each passing day. Then one day it reaches a point of no return. Sort of like how rust slowly clogs up a pipe until one day the pipe just closes over. It doesn't happen in a single query or just because we added a new table or two. It's pervasive and pandemic across the entire implementation."
"I bet when they hear that, they go insane."
"Yeah it's because with any other machine, remediating something like this would be very hard and tedious. But with Netezza we can remediate it incrementally and get more lift with each change. It's just not hard to recover the capacity if you know what you're looking for."
"I think the bottom line is that a really powerful machine tends to hide inefficient work."
"Or like one aficionado put it: Netezza can make a really ugly data model look like a super-model, and can make really bad queries look great. They just don't realize that the ugly models and bad queries are sapping machine's strength like a giant parasite."
"Ugh, now there's a visual I can live without."
Modified on by DavidBirmingham
In this case, a tortoise-brained hare is an animal that is capable of going fast but wonders why he can't.
Over the last six months or so I have seen a "trending" situation with those who use the Organize-On. This is some pretty cool functionality so it's important that we get it right. Generally speaking, folks who understand how zone-maps work will have a splendid time with Organize. Others, not so much. The machine is supposed to be fast, so why are all my queries so slow?
All I have to do is add the Organize On keys and I'm good to go. Answer: No, you have to groom first, as this actually applies the Organize to the physical data. Response: Really? when we did this it took forever! Answer: Yes, the first groom may take a bit of time but every groom after that will be painless.
We CTAS a table every night for maintenance and the groom is always running slow. Answer: if you are using Organize On, don't use a CTAS for regular maintenance. With an Organize, the table is physically broken apart and spread across multiple additional extent-pages to provide for easier groom maintenance. A CTAS re-compresses it. So another groom is required to blow it back out again.
We like to use Materialized Views to optimize our tables but now the Organize doesn't let us. How can we get this back? Answer: You don't, because the Organize essentially replaces the Materialized View and does it so much better. Asking this question means you might not understand zone maps as well as you think you do! Just sayin'
We have included the distribution key in the Organize, along with some other join keys. Answer: (Sigh) -Remove them. Join-only keys do not belong in the Organize. The Organize is for filter attributes. Uh, perhaps you don't understand zone maps? Just sayin'
We have some lookup tables where we applied an Organize. But this didn't seem to matter. Answer- No it won't because if the table is not big enough the system won't use zone maps anyhow.
We were told to turn off Page-Level zone maps but this caused a 5x reduction in performance. Answer: Page-levels radically reduce disk I/O which is our number-one enemy. Turn them back on and go home happy.
It is clear that our outlying cast of folks who have never been introduced to zone maps think that the Organize is either a clustered-index or some other kind of indexing scheme. Fair enough, is this because of the deceptive naming? Like the Materialized View? (okay, don't get me started). The Organize keys are not keys in the same sense as indexes and are certainly not used as join keys.
They are filter-attributes. By this we mean that we fully intend to use these columns with constant values, lists or selected-lists as constraints.
Zone Map Primer
Here I will use my favorite example because it is time-tested and describes the capability. If I pay a visit to Wal-Mart and I'm looking for batteries, I might visit the customer kiosk and the lady tells me that the batteries are "on the end-cap, Aisle Three". This is an indexing model because she told me exactly where to look. This does not scale because when we get to billions of rows we spend more time searching the index than retrieving records.
In a Netezza model however, she would say "It's on an end-cap but I'm not sure which one." So I go to Aisle 1, then 2, then 3 and jackpot, I buy the batteries and go home. The most important part of her answer however, was in what she "did not say". She did not say that the batteries were in Men's or Women's clothing, Automotive or Electronics. In constraining the search to a particular location, she also told me "where not to look". This aspect of "where not to look" is critical to understanding zone maps. It is also critical to stratospheric scalability. Clearly if this Wal-Mart were to quintuple in size, my battery-buying-duration experience would not change in the least.
Now for the geeky part:
Each Netezza disk has 120K physical extents. Each extent has 3MB of space, divided across 24 pages(blocks) of 128k each. If we are running prior to OS 7.x, we will be zone-mapping at the extent-level. If we are 7.x or higher, we will use the page-level. Run don't walk to 7.x and page-level zone maps! They will radically reduce I/O on the extent and this is critically important. A set of records found only on a single page can return in 1/24th of the time than if it has to scan the full extent (96 percent faster). In a real-world experiment, the zone maps on a Twinfin-18 were changed from page-level to extent-level and the same battery of queries executed against it. It performed 5x to 10x slower than with the page-level turned on. Do not underestimating the influence of disk I/O on query turnaround. Netezza is a very physical machine.
Here's another internal example: Compression in Netezza is a nominal 4x. I have seen it much higher. Let's say we have an uncompressed record that is 10,000 bytes in size. When we read it, we will read all 10,000 bytes. If the data is compressed however, we will read only 2500 bytes, a 75% reduction in disk I/O. Netezza is the only platform where compression boosts the power in both reading and writing data because it reduces disk I/O tremendously.
Zone maps are a table that Netezza holds in memory for supporting a table. Each table has its own set, describing the contents of the extents/pages allocated to the table on a given dataslice. The contents of the zone maps are built automatically when we load up our table. It will collect the information from the records stored on the given extent/page for all integers, dates and timestamps. It will store the high and low value of each, representing the table's record "ranges" for that extent.
Thus when we execute a query using one of these columns as a filter-attribute, it will go to the zone maps first and cherry-pick only those extents containing the data we want, excluding all others. this means that the data on those other zone maps won't even see the light of day for the query-in-play. If we use an Organize, we can use a wider range of data types and be more deliberate with zone-map management.
Let's say we want to search-on the transaction-date on our fact table. If we have not physically organized the data, the same transaction-date value may appear across many hundreds or thousands of extents, affecting the high/low range of many zone maps. If however, we were to physically co-locate the records with common dates into tighter physical groups, the records will physically appear inside fewer zone maps. These are the extents/pages that the machine will cherry-pick for scanning and will completely scan each one. We want it to scan as few of these as possible.
In times past, we had three primary ways of doing this.
A brute-force sort, which is pretty egregious when the table gets very large.
A software program that separates the key's distinct values and executes a block-select from the original table to the new, selecting only once for each distinct value. This physically co-locates like-keys. (the data does not have to be sorted, only like-keys co-located)
A materialized view, which would manufacture a virtual zone map (which is why it's not allowed with the Organize)
Let's say that our table's data takes up 400 extents on each data slice. If our transaction-date appears in 300 of these (it is poorly organized) then when a query runs like so:
Select count(*) from mytable where transaction_date = '2014-01-01';
All 300 extents will be searched for this information. However if we Organize on this transaction-date and then groom - the data will be physically shuffled around to co-locate the records with the same transaction-date on as few extents as possible. Let's further say that once this happens, the given date appears in only one extent. What we have just done is optimized the table 300x. We have eliminated 299 other locations to look for data. This is important because scanning a 3MB extent is a lot of work. If we are scanning 299 additional extents for each dataslice, we're really doing a lot of extra work for nothing. If we translate this to a page-level problem, we may have 24x300 pages originally containing the keys. If with Organize we reduce this to a single page, we have further reduced our scanning load by another 96 percent of the extent containing the page.
The important factor in the example is the "out-in-the-open" value of "2014-01-01". It is a "filter attribute". It is not being joined to a table with this value, Doing it this way means that the FPGA/CPU will discover which zone maps have a high/low boundary that contains this value and will retrieve a candidate list of them, If there is only one as opposed to 300, we have radically reduced out workload. Netezza will literally exclude those extents from being examined at all. We have told the machine where-not-to-look. If we join this value however, such as using a time dimension, applying the date value to time dimensions and joining the time dimension to our fact table, we will require the system to fetch the record in order to examine it, at which time it will determine whether to keep it or toss it. this sort of thing can initiate a full table scan, nullifying the zone map entirely.
We don't want this to happen. We want the data to stay on disk and never see the light of day if it's not participating in the query.
To show how dramatic this can be, we were at one site hosting over 100 billion rows in the primary fact table. A full scan of this table took 8 minutes (which is not too shabby in itself, just sayin' ). The reporting users knew that if a query ever exceeded a few minutes in duration, it was probably ignoring the zone maps. This is because once-Organized, this table would return the average query in sub-second response. Think about that,100 billion rows in sub-second response.
This is why paying attention to zone maps is such a big deal. Optimizing distribution can get us boost in the single-digits (2x, 3x etc) on a given query. Optimizing zone maps can get us 1000x boost and higher.
The Organize-On accepts one or more keys which will be applied to physically co-locate records of like-valued keys, then it will update the zone maps. Here is a test to see if we understand the application:
Take one of your largest tables. CTAS the table to another database, order by the distribution key, or by the hidden "rowid" column to make sure that the given filter key is not ordered. This could take a bit of time, of course. Then perform a query using one of your date parameters as in the example above, and time the query. Now perform an
Alter Table tabname organize on (date column name here).
Then perform groom. Once completed, execute the same query and get a timing. We can see that a several-minute query can go sub-second very easily.
What's more the additional keys in the Organize are (more or less) independently organized. They will all enjoy a much faster turnaround than not using the Organize. If records arrive on the table out-of-order, no worries. Run the groom again. Subsequent runs of groom will always be shorter in duration than the first one.
Clearly however, if the zone-map is intended to apply filter-attributes to guarantee the exclusion of extents/pages completely, we cannot use a join-key. Or at least, not a join-only key. This also means that the distribution key is out (unless we plan to call-up an individual record based on the distribution key). Also, generally do not mix high cardinality keys with low cardinality keys. Netezza finds its strength somewhere in the middle. We will find that it disfavors the low-cardinality keys when high-cardinality ones are in-the-mix.
A good way to tell which of the filter attributes for a table are "high-traffic" is to turn on query history and then examine the table/view associated with "column access statistics - $vhist_column_access_stats. This will provide the number of times the column participated in a query and with which table(s) the base table interacted with. Perform a descending sort on the NUM_WHERE column and this will reveal all. In this short list we will see filter-attributes that are most useful. Don't use any of the join-only columns or the distribution key. These may adversely affect the multi-key algorithm's output and might not optimize any zone maps for this table.
At one site, we noted several inappropriate keys in the Organize, and simply by removing them and "grooming" again, the table experienced a 100x boost. The inappropriate keys were washing out the effectiveness of the other keys.
Many of us have seen this skyline, with buildings of various heights stabbing toward the sky. Compare this to the distribution graph that is part of the Netezza Administration GUI application. Normally this should be very flat (but a jagged-edge is usually okay). Clearly a Manhattan skyline is forbidden.
Or is it? if we have a table that is very skewed (like a Manhattan skyline) but the data can be easily "horizontally" sliced with zone maps, our round-trip time for a "tall" data-slice is no different than a "short" one. All we need to look out for is process-skew (too many horizontal slices on one dataslice)
Measuring the madness
Okay, David this is all very interesting but how can I know which extents or pages or whatever is being used by the keys? Well, there are a couple of handy hidden columns on each row that can help tell-the-tale. One is the _PAGEID and one is the _EXTENTID.
select count(*) , datasliceid dsid, _pageid pid from fact_customer group by datasliceid, _pageid
will tell us how many distinct pages are being used for each data slice.
select count(*), datasliceid, _pageid from fact_customer where transaction_date = '2013-01-01' group by datasliceid, _pageid order by datasliceid, _pageid;
In the above, the "count" should be reasonably even for each dataslice.
If the total count is radically more than "1", then let's organize on transaction_id and then groom. Now try the metrics again to see if it did not reduce the total pages.
I am sure with these two columns in-hand you can think of a variety of creative ways to use them. The conclusion of it all is to get the records with common key values packed as closely as we can so they take up as few extents / pages as possible.
It's a wrap
So now that the Organize seems a little better, you know, organized, maybe this will provide a bit of guidance on how to set up your own Organize and zone maps.
And don't forget to groom when changing the Organize keys.
We won't need to groom every time we do an operation. I would suggest a groom on both a schedule and a threshold. Pick a threshold ( a lot of folks like five percent). When the total deleted rows gets above five percent of the total non-deleted rows, or the total pages per unique data point gets above an unacceptable threshold, it's time to groom. But grooming on every operation is expensive, has marginal value and actually may throw away records we wanted to keep (in case of emergency rollback).
Modified on by DavidBirmingham
I recently bumped up against a Proof-Of-Concept where "Two MPP Powerhouses went Toe-To-Toe" - and I was fairly excited to see that there might be a contender in the ring, stalking the PureData Analytics/Netezza machine. These POC's are always fun to watch. I am sure not quite as gratuitous as gladiators in the Colosseum, but engaging nonetheless.
In this corner...
The contender, dressed in white, was an MPP, er - clustered servers posing as an MPP. Now let's level-set on what an MPP is, and what it is not.
As we can see with the above high intensity graphics - 6 - 2 Cylinder Fiats versus a 12-Cylinger Jag. Now here's the trick question so don't be shy: Which one really accelerates to close the distance faster? Take your time, I'll be right here.
It's no mystery that orchestrated, optimized and purpose-built hardware beats general-purpose commodity hardware every time it's tried. The contender was a cluster of commodity servers posing as an MPP. When we tried to launch scanning analytic queries on it, we could practically hear the whirrrrr-click of the machines as they quietly, well, went silent. For a very long time. I wondered if they would ever offer up the answer. Unlike the Hitchhiker's Guide where they had to wait a million years to get the answer to the ultimate question, we decided to kick off the same query on the PureData/Netezza machine.
I hit the "enter' button while I was standing at the keyboard, then recalled that I needed to check on something else and lowered myself into the chair, but before I could sit - Netezza had the answer. No, it wasn't "42" but something a bit more actionable.
We left the bulding that day satisfied that the Jaguar had in fact smoked the competition. I probably should mention that even as we left the building, the "other guys" still had not come back with an answer. Sad indeed.
Scalability for scanning/bulk operations is a result of strong architecture. It cannot be cobbled together with general-purpose parts. The cluster of servers posing as an MPP had failed. Cluster Failure. Send it back.
As with all analysis of implementations, please accept the following as a composite commentary (much like the Case Studies in Netezza Transformation). The names have been changed largely to protect the guilty. The innocent have already been punished.
So for those of you who may recognize shadows of your own environments in the discussion below, you now have plenty of time to get them cleaned up before anyone finds out about it! But honestly, don't admit to anyone that you are "doing it this way". Just fix it. What happens in the underground, stays in the underground!
I cannot (today) count how many on-site assessments I have executed or the variety of their outcomes. I have to say that on balance, most technology folks are pretty sharp and have things on track. I can usually advise them on how to make things better. This is of course exactly what they are hoping for. What manager wants to hear that they've done most it of it wrong? Or that their investment in the technology and the people, are a bust? No managers I know take their responsibilities so lightly. Some, however, inherit a mess from their predecessor and are flummoxed as to how to unravel it. They don't want me to "put lipstick on the pig", so to speak, but to provide a roadmap on how to dig out of the ditch (or hole, or rat's nest) and move things forward in a healthy direction.
Working with a 10400 Mustang, pre-TwinFin Era, one of our recently arrived data warehouse aficionados took our leadership aside and said, "What they are describing is a reporting system, like a data mart. But we aren't using any technologies to help them with this. We need to have a talk with them about standing up Microsoft SQLServer so we can put a data mart on it and..."
Stop right there. Yikes. He was so full of passion! It was really, really hard to talk him back from the ledge. So I finally said, "If you mention this plan to the client, even once, we will have to remove you from the project." And his eyes went wide like he'd been hit with a two-by-four across the forehead. "Why?" was his impassioned plea. Time to educate him on what Netezza does, right?
Netezza is a data warehouse appliance. It circumscribes and simplifies the data warehouse disciplines. It also makes some strong assumptions about the potential users of the appliance, not the least of which is what-problems-it-solves-well and what-problems-it-does-not-solve-at-all. (World Peace, Global Warming, Time Travel, Cloning of IT Staff Members, and getting the Dallas Cowboys to the Superbowl, to name a few).
Example: What if you were going about doing some-regular-task manually-and-tediously, and someone then showed you a device that would automate it? You might count your blessings and move forward with a skip in your step. But when you share the device's features with someone unfamiliar with the manual, tedious nature of an existence without it, they scratch their heads and say "I don't get it."
I am reminded of a joke where a lumberjack is in the market for a new saw. A powered-chain-saw salesman asks him how many trees he cuts down in a day with his manual saws, and the man says "30". Ahh, says the salesman, with one of these you could cut 100 or more in a single day. The lumberjack doesn't believe him, so the salesman tells him, Look, take this one for a test drive. Use it all day tomorrow and if it doesn't at least double your output, bring it back, no harm done, no questions asked. The lumberjack agrees but returns two days later, clearly disgruntled about the chain-saw's performance. "I was only able to cut down 10 trees with this lousy thing." To which the salesman balked, and wondered if it might not be defective. So he beckoned the lumberjack to follow him outside to their testing area, where he threw a log across two sawhorses and pulled the starter cord on the chain saw. When it roared to life, the lumberjack took a step back and shouted over the sound of the motor - "WHAT'S THAT NOISE?"
Clearly a little product-orientation was in order, no?
A CTO once lamented to me, "Well, we did the best we could with what we had." - Well sure. Don't we all? I don't know of anyone who borrows or rents help to do it poorly. Nor do they take their best people to deliberately make something sub-standard. The problem is, without a baseline knowledge of what the machine can do, how it is typically deployed, and what to embrace or avoid about it, then it's really no different than the lumberjack's problem. He did the best with what he had, didn't he?
What were the outcomes? Poor perception of the product by the user. An objective lack of productivity. General grousing about something that is not well-understood. Where have we seen this before? Give a call to practically any help desk of any product, especially a technology product, and they will bend your ear with "howling" examples of users who mis-applied the product - and some would say - were just plain stupid about it.
Underwriters Laboratory (UL) has a standard policy of quickly adjudicating claims against them no matter how frivolous. Seems that just having the "UL" on the product makes them a lightning rod for litigation. One man took his name-brand lawn mower, which also sported the UL sticker, picked it up while it was still running, and attempted to use it as a hedge-trimmer. He slipped, the lawnmower fell on him, and he sued the maker of the lawnmower and UL. Three boys found a giant bullfrog and decided to kill it by setting it on fire. They grabbed a gas can from the shed, doused the bullfrog with it and tossed a lighted match on the hapless creature. Someone should have told the lads about the volatility of gasoline fumes, because the flames climbed the can's fume-trail directly into its mouth and detonated the can's contents, seriously wounding and severely burning all three boys. They sued the makers of the gas can and UL, which also had a label on the can. Perhaps someone should send this one in to A Thousand Ways to Die. For bullfrogs.
But this is not a dissertation on A Thousand Ways to Fail with Netezza because frankly, it's really hard to fail with a machine this powerful. This is why I say that when we encounter howlers like the guy with the lawnmower or frog-immolation, we're clearly off the beaten path. Why is it then, that the "beaten path" pops up more often than it should? Or for that matter, pops up at all? Aren't data warehousing folks a little smarter than that?
Of course they are. In fact, I don't recall encountering any experienced data warehousing folks who have had a bad experience - quite the opposite. However, as for the folks who have never built a data warehouse but have a lot of experience in "applications" - well in this zone it can get a little choppy.
The point is, across the fruited plain we have exceptions to every rule. My sincere hope is that your project is not inadvertently caught in the "crosshairs of fate".
Rat's Nest Number One.
Upon arrival on site I knew something was wrong. People were squeezed into their cubes, boxes were stacked against walls in every room. The whole office just felt so crowded. And then they introduce me to "the machine". In this case, their production machine was the lowest-powered machine that Netezza had to offer, just short of a Skimmer. The admin at the desk barks at me for parking in the street and not in the garage underground. It's my first day, and nobody said anything about parking. The difference in cost was exactly $1, and if you're like I am and travel a lot, this kind of difference is not worth discussing. Except for here. It's tongue-lashing time. All of these things added up to some significant red flags, moving in a direction of a road lined with red flags.
Case in point, this is not a company doing things expediently or frugally. They are cheap. They will do things according to the lowest denominator of cost and skill, not because they have balanced priorities. They would rather save a few dollars on training or even a rent-an-architect, and allow the least-of-their-staff to painfully slog through the nuances of data warehousing on an immutable deadline. It's the immutable deadline I can't fathom. Here's why:
In a solution implementation, we have cost, duration and quality. Pick two. Whichever two you pick will shortchange the third. Every time it's tried. Well, these folks were shortchanging all three in the blind naivete that it was valid and workable. Without time or resources, quality is always the first, most expedient of the three to fall on its face. Doing it on-the-cheap? Well, what does this say of their readiness for prime-time? Data warehouses have an ongoing cost-of-ownership. It's not trivial. Those who want to play cheap should find another profession, one that does not cherish quality.
I was told by the client that their current back data processing environment used Netezza stored procedures. Another big red flag. Stored procs invite black-boxed code and we cannot capture data lineage through them. Netezza stored procs are ideal for the front-end. Never for the back-end. They are hand-crafted and rather ugly to maintain (this would be true on any platform).
On this particular platform, they had decided not to use monolithic stored procs (a proc with a lot of serialized operations in it) but use modular ones. So modular in fact, that each inbound data stream had its own dedicated "receivor" stored proc, followed by three more role-based stored procs plus another two - one to validate and one to push the data into the final target table. All 150 incoming record descriptions/filestreams had these 6 stored procedures assigned to them. With one catch - they were the same "role" of stored proc, but all of them were different. That's right, to intake 150 tables we saw 6 stored procs each, for a grand total of 900 stored procedures, and this was for just one of several data sources!
Many of you OO aficionados see something screaming out at you, that this should have been one general-purpose loader with six phases of operation, serving all 150 streams. Adding another source and another 100 streams, no problem, they go through the same loader and phases. Need more phases of operation? No problem, just add them to the loader and everyone benefits. Forever. It's a beautiful thing.
Of course, this means a deliberate instantiation of some reusable infrastructure. Many app-developer folks are not familiar with how to do this. After all, with 150 tables incoming,we could expect those definitions to remain pretty stable. But if the same stored procedures are facing the internal data model(s) (and they must), then we have worse than a cut-and-paste rat's nest, we have a hand-crafted rat's nest. If the data model must change, we may effectively invalidate most if not all of the stored procedures. Can you even imagine having to review - and re-review 900 stored procedures so -- oh never mind.
It therefore did not surprise me to learn that they had "frozen" the data model so that the stored procedures could have higher durability. We know this isn't realistic either, because the business will start to drive more requirements into the solution and the model must change to accommodate it, even if it's just attribution of existing tables. How do we keep these things from impacting the existing code? We have no choice but to freeze the data model. But this isn't really a choice, it's more like a un-necessary evil. Their stored procedure implementation only guarantees one thing: their functional code base will be in flux and unstable for the duration of the solution's lifetime.
I made a valiant attempt to explain the rather problematic issues concerning their implementation. (Problematic here, is a polite and professional term for rat's nest without having to say so). I have to admit however, that "rat's nest" may have done disservice to the rats. They also wanted me to "jot down" a list of "enhancements" that would make their solution better, stronger, faster - all that stuff. I could not think of a profesisional term for "burn it to the ground and start over".
Perhaps I could have told them the bullfrog story.
Rat's Nest Number Two
In keeping on our theme with stored procedures - recall - stored procedures in Netezza were originally concieved for supporting the front end BI tools. Not back-end data processing. In fact, pushing the back-end data processing under higher programmatic control is something new - even to ETL tools. That Netezza supports it very well is a bonus. Actually, Netezza does it better than any of the other databases, because the ease of manufacturing an intermediate table, using it and tossing it, is amazingly simple and easy to manage. Other machines, not so much.
But when I say "ELT" or back-end processing, it's still a SQL statement. We have options, like hand-crafting the SQL in script. Been there, done that. Or hand-crafting a stored procedure. Not really interested in doing that again. And then we have generated-SQL from a template or metadata-driven framework.
ETL tools have pushdown, but it's still pretty weak. At least, too weak for power-users like moi. I have no doubt that they will step up, eventually.
In this example, we have the opposite problem from the first. Just as much of a rat's nest, it is a monolithic stored procedure rather than a gaggle of modular ones. The monolithic stored procedure often runs for an hour or more, executes hundreds of SQL statements along the way, and has a lot of detailed steering logic embedded amongst them. It is a veritable nightmare to code and debug, and even worse to troubleshoot. I hear that some developers have been invited to padded cells afterwards, but I think those are just exaggerations. It can't be that bad, can it?
Given choice between only the two, I would choose the gaggle-of-modular over the monolithic. I mean, if you were implementing it and not me. I always have the choice to say no. I don't work for your company, after all. You may not have a good choice. Your uber-architects and their hired guns have told you it's stored-procedures-or-nothing. So it's time to pick a poison I suppose. I'll take hemlock for $400, Alex.
As these stored-proc programmers stared back at me with hollow eyes, I thought I had entered some macabre Tim Burton flick and all we needed was some spooky music, fog-machines and strange howling in the distance to make it complete. They spoke in muted, muffled tones and their questions seemed to drift. Had they slept in like, the last 48 hours? They all looked sooo tired. This is what a monolithic stored procedured does to your staff. Now watch it drain the lifeblood from your operations staff. It is the virtual/technical equivalent of leeches, and you thought we'd left those behind in the Middle Ages (for technology, that would be the 1990's)
Stored procedures don't have single-step capability. When we add another function to it, we have to test all of the functions at once, because it has to run end-to-end. We can creatively work around this in the beginning, but eventually we have to integrate it. When one test takes over an hour, or two, and the answer is buried in the mountain of carefully crafted NZPL-SQL code, at some point we have to wonder what we signed up for. (that would be, we signed up to do it wrong). Ouch.
Stored procedures cannot be parallelized (unlike their more modular counterparts) and as such is a glaringly missed opportunity. They are doomed to be serialized forever.
Now, our framework (that we consult and use as a problem-solving platform for Netezza - nzDIF) handled 100 percent of all data lineage no matter how many intermediate tables, databases or machines are involved in the overall flows and handoff of work. You won't get this with any other product, nor with anythng a stored procedure has to offer. This would be true of any stored procedure on any platform.
This is because on a transactional platform, procs are meant to handle multiple operations on singleton entities so data lineage simply is not an issue. On a Netezza platform, procs are meant to serve the BI platform, not the back end, so likewise data lineage is not much of an issue. Stored procs for the front end are largely summary/filters for pre-existing datasets. We want the lineage on those datasets, not the on-demand operations that consume them. "Could" we expect data lineage from stored procedures in Netezza? Why? The only reason would be to support back-end processing, and stored procedures are not for back-end processing. It's sort of a Catch-22.
Rule #10 in play here
And let's not forget Rule #10, shall we? Recently emblazoned in glowing letters on the catacomb walls of the Underground, Rule #10 is very simple: Never do bulk data processing in a general-purpose RDBMS engine running on a general-purpose platform.
Now, I just had to get Rule #10 into the forefront because this underscores the primary reason why stored procedures are bad for back end data processing. If we have a rule in place against using SQL for bulk processing on a general-purpose platform/engine, then any experience we may have with bulk processing through stored procedures on such a platform is itself a violation and not a marketable skill in the Enzee Universe. More importantly, it institutionalizes the violation and makes it so much worse. We could "maybe" dig ourselves from a ditch if we're using hand-crafted out-in-the-open SQL (also not recommended) but when ensconced behind the fortress of stored procedures, we have to first storm the fortress before we can loot it. Easier said that done.
All that said, folks who have instantiated stored-procedure-based data processing on general purpose platforms have already been doing it the wrong way, so why bring those practices into the Netezza machine? Just sayin'
Rat's Nest Number Three
Ahh, you thought we were done and coming into the home stretch, eh? Well, we're almost there.
This particular rat's nest only appears in places where people have churned a lot of contractors, consultants and other aficionados and hired guns through the company's various revolving doors. And as the person who inherits it rightly recognizes if as a rat's nest, or a hairball, something comes to mind that rushes through their brains like a river of water "Wow, and I deliberately signed up for this. What could I possibly have been thinking?"
Ahh, not to worry, this syndrome is rare, and shall pass. Breathing deeply will override the spooky breathing cadence of the Dark Lord of Expectations, and shall give you extraordinary confidence on how to resolve this problem.
This condition is entirely severable from the technology itself. Any shop that allows the contractors to establish their own standards without oversight is just signin' up for a world-of-hurt somewhere down the line. Fortunately for us, the Netezza machine is like a monster truck with gumbo-mudder tires. No matter how mired-in-clay it may be, we need only fire the engines and punch the accelerator to regain control and be underway in no time.
The first step, like any 12 step program, is to recognize that a problem exists. Bandaging a hemmorraging wound will not heal it. This will only forestall the inevitability of bleeding out. If we are to be proper stewards, bandaging has its benefits while we treat the larger wounds.
First and foremost, commit to some form of data management logistics. And this is not by purchasing a data backup tool. This is a committment to flow-based, insert-only architecture as the rule, with updates and deletes as the exceptions. After all, if we were using an ETL tool, we wouldn't be able to update or delete a flow of work. We can only integrate and filter the data while it's on its way elsewhere, but that elsewhere will always be an insert-only target - because it's a file set and and not a database. Only when we reach the book-end of the database can we perform updates and deletes, and these are largely to support things like constraints and slowly-changing dimensions. We just need to avoid invoking an insert/delete/update protocol for all tables at all times. Center on a theme and accommodate the exceptions. We must have rules, and this is one of them.
Commit to some form of rules-driven architecture. That is, when we encounter a new condition or potential fork in the logic, consider shaping it with a rule (one that we can switch on/off or modify from afar) rather than hard-wired SQL or hard-coded solutions. Is this easy to do? Of course not. Nothing is easy about data warehousing or large-scale flow mechanics, silly rabbit.
Netezza has simplified the harder, tedious and repeatable parts so that we can actually address the issues we never had time for before. The "next level" was never in view, or even on the radar because we were always immersed in the operational weeds of the implementation. With a Netezza machine, lots of that is behind us, but before us stands the new challenge. It goes something like this:
If I were to give you a 400-slice toaster, your problem is no longer toasting bread, but bread management. Keeping the toaster busy has now become a daunting problem of bread logistics, not machine capacity. The problem domain has shifted into a zone that lots of folks don't have any experience with. Time to step up.
So the CEO is glaring at his white-board, or rather, white-wall ever since he had an entire wall converted to white-board surface - and its border-to-border scribblings, ad-hoc graphics and spider-web of interconnected projects. He wonders when these things will finally fall "under control".
He chats at board meetings, his various coffee-klatches and among his business acquaintances, peers and lieutenants. He has dreams. Big ones. Who doesn't? But we know that a corporate dreamer is no different than the several kids lying in the grass staring at the clouds or stars, their craniums barely touching one another as their bodies are configured in a pinwheel. They dream of what those clouds look like, or what it might feel to fly among the galaxies in a starship. If only they had the power to fly. The power to reach lightspeed.
But in a lot of ways, they already can. Research has shown, in various ways, that the "speed of thought" in the human brain requires countless millions of signals in any given fraction of a second. The permutations of thought-pathways are themselves mind-boggling, and yet all of this takes place rather seamlessly and instantaneously. People think just as quickly at the supermarket as they do in their homes or when driving. Martial artists don't particularly think faster, but have trained their reflexes to second-guess their brain's immediate intentions. What does all this mean?
One could assert that the human brain is already processing data far faster than mere electronics could possibly accomplish, meaning that the human brain actually thinks, on the aggregate, faster and with more directed power than the speed of light itself. Okay, that's pretty heavy, but think about those kids wondering if they could travel at the speed of light or beyond, when the mere act of dreaming has already taken them there?
How to capture this speed-of-thought capacity? When analysts stand up their uber-powered environment, they want to query their data, receive a response, formulate a ripost and fire it back again, as fast as they are able to think. Well, what machine could adequately keep up with the human brain? Not that it's directly bound to the brain or anything, but we know that if an analyst has to wait for ten minutes, or an hour, for a return-on-query, that their thought processes are not willing to keep themselves on hold for that long. The human brain moves on, and has formulated many more questions even before the machine returns the first one. Underpowered technology like this cannot serve analytics in any significant capacity.
Now let's go back in time to NASD (securities regulatory agency for NASDAQ), which in 2006 had a processing day that exceeded 28 hours. That's right, they would start a new processing day before the prior one finished, and they would catch up on the weekends. No matter how the CEO rearranged his thoughts or white-board priorities, it would not change the primary problem: a lack of capacity. They installed a Netezza machine and recharacterized their workload on it, effectively reducing their processing day to less than 2 hours. Simpler processes. More accurate answers - and some answers that had been unavailable before. Capacity in hand, the business forces saw an opportunity arise that would have been impossible without this capacity, and so NASD merged with NYSE's counterpart to form FINRA. This is not to say that Netezza was solely and completely responsible for the merger, but definitely played into the ability (or lack thereof) to make decisions toward this goal. Face it, without capacity, FINRA would never have seen the light of day.
The CEO doesn't really care about the length of a batch window or SLA compliance. He/She cares about capacity. This would true of any CEO on the planet. Whether it's a hospital, retail chain or head of a consulting firm, they want to capture more business and maintain good service with their current base. This requires capacity and "bandwidth" to do so. That CEO might have the best-laid plans on the planet, but without capacity, he's just a dreamer. Just another dreamer.
Is this what they thought of the CEO of NASD, or any other corporate exec who knows what the answer is, the path to sucess, favor and recognition in the marketplace? Knowing what the answer is, and having no power to fulfill it, well, looks a lot like just-another dreamer. What enabled this dream? Why dream at all if there's no capacity to make it happen?
So an architect gets the PureData/Netezza machine in-house, and handily squares-away that first project. Then another, and another. Unbeknownst to folks at her level, the CEO is happy to erase that first project from the white-board, and the next, and so forth. In reasonably short order, the project work has been assimilated by the time the CEO erases the final piece of the puzzle and steps away from the white board, now an empty canvas.
Then something interesting starts to happen. The "drag" on the CEO's mental cycles has abated, the engines are still firing on all cylinders but there's no overhead - all those outstanding projects - to distract them. Thoughts accelerate into the light-speed zone. A hand reaches for the EXPO dry-erase marker, and like the light-saber jumps into the Jedi's hand on-demand, the marker meets his hand in the air and the ideas start to flow.
He starts to dream.
And now we have a very powerful situation - a dreamer who is actively dreaming, with the power to make the dreams come true. Which is more valuable? The visionary with nothing more than gossamer-thin hopes for a brighter tomorrow? Or the dreamer with the capacity to make dreams come true?
Is a Puredata/Netezza machine a dream machine? Is it what dreams are made of? This might sound a bit surreal, but what other machine has the capacity to respond at the speed-of-thought, the ability to assimiliate - with a little assistance - the dreamer's thought processes? And so like Jackie Chan-in-a-box, it is able to reflexively anticipate the competitors next move. Whether that's the corporate adversary, the competitive company, the market forces or the various risks in every new endeavor - we need a machine that can defend us like a blackbelt, can anticipate like a reflex, and can convert mere analytics into a jump to lightspeed, leaving our competitors in the proverbial dust, stardust tho it may be. How's that for thinking big?