Would You Like More WLM Information In DB2 Accounting Trace - And How Would You Use It?
MartinPacker 11000094DH Comments (3) Visits (6774)
I was lucky enough to be in Silicon Valley Lab for DB2 BootCamp last week. There I ran into a DB2 developer I've worked very successfully with in the past - John Tobler.
(He's the guy I look to for questions and issues with DB2 SMF data.)
We had a good discussion about something I'd personally like to see in DB2 Accounting Trace - more WLM information - and this post is as a result of this conversation.
Two salient pieces of information:
Putting these two together you come to the conclusion it might technically be possible to get more WLM information into Accounting Trace. That, of course, doesn't mean it's going to happen. I have to stress that before going any further. But it's worthwhile thinking about what's needed and how useful that would be to customers.
What Should Be Added?
Uncontroversially, I think, QWACWLME should be filled in with Service Class for all work types. I say "uncontroversially" because - if it can be done cheaply - it's just using space that's already in the record. I don't know if it can be done cheaply, though.
More controversially because, taken together, they represent 18 additional bytes in each 101 record are:
I think I could live without Workload but it seems a shame to exclude it.
As Willie points out Performance Index (PI) is also in the DISPLAY THREAD command but I think we can get that from RMF Workload Activity Report (SMF 72) and that's probably a better place to get it from.
But the key question is "how useful and important would this extra information be to you?"
Let me outline three areas of use I can immediately see...
Understanding Not Accounted For Time
This time bucket is what you get when you subtract all the time buckets we know about from the headline response time. The two most important causes for this are CPU Queuing and Paging Delay.
If we calculate this time for a record and we know the (behaviour of) the WLM Service Class it's in we can understand this time better. A bugbear of doing DB2 performance is just this: understanding whether work is subject to queuing or not. (For Paging Delay as a cause of Not Accounted For Time we could do much the same thing.)
Understanding The WLM Aspects Of DB2 Work
It would be useful to be able to break down the work coming into a DB2 subsystem by Service Class, Goal and Importance, wouldn't it? In particular it would be nice to see the hierarchy of goals and importances, and to be able to relate the works' WLM attributes to those of address spaces such as DIST and DBM1. (In the former case discovering that the TCB's in the DIST address space were subject to pre-emption by the DDF work would be a blow.)
Correlating Service Class And Report Class For DDF Work
For non-enclave work I use the Report Class and Service Class in Type 30 to establish how these relate to each other (and what kind of work has which RC and which SC). I can't do it for DDF work because there's no usable Type 30 (i.e. with this kind of information in). If the 101 record had these both in you could extend the method.
(In case you wonder what I'm talking about see What's In A Name?.)
This still doesn't help us in the non-DDF enclave cases, of course.
Over To You
What do you think? I've listed three categories of value that immediately spring to mind (and that's with the disbenefit of jetlag so maybe not that articulately expressed). But I'd really like to know if this would be of value to you - and to modify the proposal if you think you'd like something slightly different.
There's no guarantee this will get done - and it's a bit of an attempt at a "Social Requirements Gathering" process. But it's worth debating in public, I think.