Well, it's Tuesday again, but this time, today we had our third big storage launch of 2009! A lot got announced today as part of IBM's big "Dynamic Infrastructure" marketing campaign. I will just focus on the
disk-related announcements today:
- IBM System Storage DS8700
IBM adds a new model to its DS8000 series with the
[IBM System Storage DS8700]. Earlier this month, fellow blogger and arch-nemesis Barry Burke from EMC posted [R.I.P DS8300] on this mistaken assumption that the new DS8700 meant that DS8300 was going away, or that anyone who bought a DS8300 recently would be out of luck. Obviously, I could not respond until today's announcement, as the last thing I want to do is lose my job disclosing confidential information. BarryB is wrong on both counts:
- IBM will continue to sell the DS8100 and DS8300, in addition to the new DS8700.
- Clients can upgrade their existing DS8100 or DS8300 systems to DS8700.
BarryB's latest post [What's In a Name - DS8700] is fair game, given all the fun and ridicule everyone had at his expense over EMC's "V-Max" name.
So the DS8700 is new hardware with only 4 percent new software. On the hardware side, it uses faster POWER6 processors instead of POWER5+, has faster PCI-e buses instead of the RIO-G loops, and faster four-port device adapters (DAs) for added bandwidth between cache and drives. The DS8700 can be ordered as a single-frame dual 2-way that supports up to 128 drives and 128GB of cache, or as a dual 4-way, consisting of one primary frame, and up to four expansion frames, with up to 384GB of cache and 1024 drives.
Not mentioned explicitly in the announcements were the things the DS8700 does not support:
- ESCON attachment - Now that FICON is well-established for the mainframe market, there is no need to support the slower, bulkier ESCON options. This greatly reduced testing effort. The 2-way DS8700 can support up to 16 four-port FICON/FCP host adapters, and the 4-way can support up to 32 host adapters, for a maximum of 128 ports. The FICON/FCP host adapter ports can auto-negotiate between 4Gbps, 2Gbps and 1Gbps as needed.
- LPAR mode - When IBM and HDS introduced LPAR mode back in 2004, it sounded like a great idea the engineers came up with. Most other major vendors followed our lead to offer similar "partitioning". However, it turned out to be what we call in the storage biz a "selling apple" not a "buying apple". In other words, something the salesman can offer as a differentiating feature, but that few clients actually use. It turned out that supporting both LPAR and non-LPAR modes merely doubled the testing effort, so IBM got rid of it for the DS8700.
Update: I have been reminded that both IBM and HDS delivered LPAR mode within a month of each other back in 2004, so it was wrong for me to imply that HDS followed IBM's lead when obviously development happened in both companies for the most part concurrently prior to that. EMC was late to the "partition" party, but who's keeping track?
Initial performance tests show up to 50 percent improvement for random workloads, and up to 150 percent improvement for sequential workloads, and up to 60 percent improvement in background data movement for FlashCopy functions. The results varied slightly between Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes, and I hope to see some SPC-1 and SPC-2 benchmark numbers published soon.
The DS8700 is compatible for Metro Mirror, Global Mirror, and Metro/Global Mirror with the rest of the DS8000 series, as well as the ESS model 750, ESS model 800 and DS6000 series.
- New 600GB FC and FDE drives
IBM now offers [600GB drives] for the DS4700 and DS5020 disk systems, as well as the EXP520 and EXP810 expansion drawers. In each case, we are able to pack up to 16 drives into a 3U enclosure.
Personally, I think the DS5020 should have been given a DS4xxx designation, as it resembles the DS4700
more than the other models of the DS5000 series. Back in 2006-2007, I was the marketing strategist for IBM System Storage product line, and part of my job involved all of the meetings to name or rename products. Mostly I gave reasons why products should NOT be renamed, and why it was important to name the products correctly at the beginning.
- IBM System Storage SAN Volume Controller hardware and software
Fellow IBM master inventory Barry Whyte has been covering the latest on the [SVC 2145-CF8 hardware]. IBM put out a press release last week on this, and today is the formal announcement with prices and details. Barry's latest post
[SVC CF8 hardware and SSD in depth] covers just part of the entire
The other part of the announcement was the [SVC 5.1 software] which can be loaded
on earlier SVC models 8F2, 8F4, and 8G4 to gain better performance and functionality.
To avoid confusion on what is hardware machine type/model (2145-CF8 or 2145-8A4) and what is software program (5639-VC5 or 5639-VW2), IBM has introduced two new [Solution Offering Identifiers]:
- 5465-028 Standard SAN Volume Controller
- 5465-029 Entry Edition SAN Volume Controller
The latter is designed for smaller deployments, supports only a single SVC node-pair managing up to
150 disk drives, available in Raven Black or Flamingo Pink.
- EXN3000 and EXP5060 Expansion Drawers
IBM offers the [EXN3000 for the IBM N series]. These expansion drawers can pack 24 drives in a 4U enclosure. The drives can either be all-SAS, or all-SATA, supporting 300GB, 450GB, 500GB and 1TB size capacity drives.
The [EXP5060 for the IBM DS5000 series] is a high-density expansion drawer that can pack up to 60 drives into a 4U enclosure. A DS5100 or DS5300
can handle up to eight of these expansion drawers, for a total of 480 drives.
- IBM System Storage Productivity Center v1.4
The latest [System Storage Productivity Center (SSPC) v1.4] can manage all of your DS3000, DS4000, DS5000, DS6000, DS8000 series disk, and SAN Volume Controller. You can get the SSPC built in two modes:
- Pre-installed with Tivoli Storage Productivity Center Basic Edition. Basic Edition can be upgraded with license keys to support Data, Disk and Standard Edition to extend support and functionality to report and manage XIV, N series, and non-IBM disk systems.
- Pre-installed with Tivoli Key Lifecycle Manager (TKLM). This can be used to manage the Full Disk Encryption (FDE) encryption-capable disk drives in the DS8000 and DS5000, as well as LTO and TS1100 series tape drives.
- IBM Tivoli Storage FlashCopy Manager v2.1
The [IBM Tivoli Storage FlashCopy Manager V2.1] replaces two products in one. IBM used
to offer IBM Tivoli Storage Manager for Copy Services (TSM for CS) that protected Windows application data, and IBM Tivoli Storage Manager for Advanced Copy Services (TSM for ACS) that protected AIX application data.
The new product has some excellent advantages. FlashCopy Manager offers application-aware backup of LUNs containing SAP, Oracle, DB2, SQL server and Microsoft Exchange data. It can support IBM DS8000, SVC and XIV point-in-time copy functions, as well as the Volume Shadow Copy Services (VSS) interfaces of the IBM DS5000, DS4000 and DS3000 series disk systems. It is priced by the amount of TB you copy, not on the speed or number of CPU processors inside the server.
Don't let the name fool you. IBM FlashCopy Manager does not require that you use Tivoli Storage Manager (TSM) as your backup product. You can run IBM FlashCopy Manager on its own, and it will manage your FlashCopy target versions on disk, and these can be backed up to tape or another disk using any backup product. However, if you are lucky enough to also be using TSM, then there is optional integration that allows TSM to manage the target copies, move them to tape, inventory them in its DB2 database, and provide complete reporting.
Yup, that's a lot to announce in one day. And this was just the disk-related portion of the launch!
technorati tags: ds8000, disk, ds8700, exn3, svc, cf8, 2145-c58, DS5000, DS4000, DS3000, DS5020, DS4700, DS5100, DS5300, SSPC, TKLM, FlashCopy+Manager, Tivoli, Storage+Manager, TSM, DB2, Oracle, SAP, SQL, Microsoft+Exchange, VSS, Windows, AIX, N+series, XIV
The technology industry is full of trade-offs. Take for example solar cells that convert sunlight to electricity. Every hour, more energy hits the Earth in the form of sunlight than the entire planet consumes in an entire year. The general trade-off is between energy conversion efficiency versus abundance of materials:
- Get 9-11 percent efficiency using rare materials like indium (In), gallium (Ga) or cadmium (Cd).
- Get only 6.7 percent efficiency using abundant materials like copper (Cu), tin (Sn), zinc (Zn), sulfur (S), and selenium (Se)
IBM has eliminated this trade-off with a record-setting breakthrough last week, demonstrating 9.6 percent efficiency [thin film solar cells using earth-abundant materials].
A second trade-off is exemplified by EMC's recent GeoProtect announcement. This appears similar to the geographic dispersal method introduced by a company called [CleverSafe]. The trade-off is between the amount of space to store one or more copies of data and the protection of data in the event of disaster. Here's an excerpt from fellow blogger Chuck Hollis (EMC) titled ["Cloud Storage Evolves"]:
"Imagine a average-sized Atmos network of 9 nodes, all in different time zones around the world. And imagine that we were using, say, a 6+3 protection scheme.
The implication is clear: any 3 nodes could be completely lost: failed, destroyed, seized by the government, etc.
-- and the information could be completely recovered from the surviving nodes."
For organizations worried about their information falling into the wrong hands (whether criminal or government sponsored!), any subset of the nodes would yield nothing of value -- not only would the information be presumably encrypted, but only a few slices of a far bigger picture would be lost.
Seized by the government? falling into the wrong hands? Is EMC positioning ATMOS as "Storage for Terrorists"? I can certainly appreciate the value of being able to protect 6PB of data with only 9PB of storage capacity, instead of keeping two copies of 6PB each, the trade-off means that you will be accessing the majority of your data across your intranet, which could impact performance. But, if you are in an illicit or illegal business that could have a third of your facilities "seized by the government", then perhaps you shouldn't house your data centers there in the first place. Having two copies of 6PB each, in two "friendly nations", might make more sense.
(In reality, companies often keep way more than just two copies of data. It is not unheard of for companies to keep three to five copies scattered across two or three locations. Facebook keeps SIX copies of photographs you upload to their website.)
ChuckH argues that the governments that seize the three nodes won't have a complete copy of the data. However, merely having pieces of data is enough for governments to capture terrorists. Even if the striping is done at the smallest 512-byte block level, those 512 bytes of data might contain names, phone numbers, email addresses, credit cards or social security numbers. Hackers and computer forensics professionals take advantage of this.
You might ask yourself, "Why not just encrypt the data instead?" That brings me to the third trade-off, protection versus application performance. Over the past 30 years, companies had a choice, they could encrypt and decrypt the data as needed, using server CPU cycles, but this would slow down application processing. Every time you wanted to read or update a database record, more cycles would be consumed. This forced companies to be very selective on what data they encrypted, which columns or fields within a database, which email attachments, and other documents or spreadsheets.
An initial attempt to address this was to introduce an outboard appliance between the server and the storage device. For example, the server would write to the appliance with data in the clear, the appliance would encrypt the data, and pass it along to the tape drive. When retrieving data, the appliance would read the encrypted data from tape, decrypt it, and pass the data in the clear back to the server. However, this had the unintended consequences of using 2x to 3x more tape cartridges. Why? Because the encrypted data does not compress well, so tape drives with built-in compression capabilities would not be able to shrink down the data onto fewer tapes.
(I covered the importance of compressing data before encryption in my previous blog post
[Sock Sock Shoe Shoe].)
Like the trade-off between energy efficiency and abundant materials, IBM eliminated the trade-off by offering compression and encryption on the tape drive itself. This is standard 256-bit AES encryption implemented on a chip, able to process the data as it arrives at near line speed. So now, instead of having to choose between protecting your data or running your applications with acceptable performance, you can now do both, encrypt all of your data without having to be selective. This approach has been extended over to disk drives, so that disk systems like the IBM System Storage DS8000 and DS5000 can support full-disk-encryption [FDE] drives.
Certainly, something to think about!
technorati tags: , sunlight, solar cells, electricity, indium, gallium, cadmium, copper, tin, zinc, sulfur, selenium, thin+film, efficiency, EMC, Chuck Hollis, GeoProtect, Cleversafe, governement, seizure, Facebook, terrorists, encryption, forensics, hackers, protection, performance, disk, tape
Tonight PBS plans to air Season 38, Episode 6 of NOVA, titled [Smartest Machine On Earth]. Here is an excerpt from the station listing:
"What's so special about human intelligence and will scientists ever build a computer that rivals the flexibility and power of a human brain? In "Artificial Intelligence," NOVA takes viewers inside an IBM lab where a crack team has been working for nearly three years to perfect a machine that can answer any question. The scientists hope their machine will be able to beat expert contestants in one of the USA's most challenging TV quiz shows -- Jeopardy, which has entertained viewers for over four decades. "Artificial Intelligence" presents the exclusive inside story of how the IBM team developed the world's smartest computer from scratch. Now they're racing to finish it for a special Jeopardy airdate in February 2011. They've built an exact replica of the studio at its research lab near New York and invited past champions to compete against the machine, a big black box code -- named Watson after IBM's founder, Thomas J. Watson. But will Watson be able to beat out its human competition?"
Craig Rhinehart offers
[10 Things You Need to Know About the Technology Behind Watson].
An artist has come up with this clever
Dr. Jon Lenchner from IBM Research has a series of posts on
[How Watson "sees", "hears", and "speaks"] and [Selected Nuances].
Like most supercomputers, Watson runs the Linux operating system. The system runs 2,880 cores (90 IBM Power 750 servers, four sockets each, eight cores per socket) to achieve 80 [TeraFlops]. TeraFlops is the unit of measure for supercomputers, representing a trillion floating point operations. By comparison, Hans Morvec, principal research scientist at the Robotics Institute of Carnegie Mellon University (CMU) estimates that the [human brain is about 100 TeraFlops]. So, in the three seconds that Watson gets to calculate its response, it would have processed 240 trillion operations.
Several readers of my blog have asked for details on the storage aspects of Watson. Basically, it is a modified version of IBM Scale-Out NAS [SONAS] that IBM offers commercially, but running Linux on POWER instead of Linux-x86. System p expansion drawers of SAS 15K RPM 450GB drives, 12 drives each, are dual-connected to two storage nodes, for a total of 21.6TB of raw disk capacity. The storage nodes use IBM's General Parallel File System (GPFS) to provide clustered NFS access to the rest of the system. Each Power 750 has minimal internal storage mostly to hold the Linux operating system and programs.
When Watson is booted up, the 15TB of total RAM are loaded up, and thereafter the DeepQA processing is all done from memory. According to IBM Research, "The actual size of the data (analyzed and indexed text, knowledge bases, etc.) used for candidate answer generation and evidence evaluation is under 1TB." For performance reasons, various subsets of the data are replicated in RAM on different functional groups of cluster nodes. The entire system is self-contained, Watson is NOT going to the internet searching for answers.
On ZDnet, Steven J. Vaughan-Nichols welcomes our new [Linux Penguin Jeopardy overlords]. I have to say I share his enthusiasm!
technorati tags: IBM, Nova, Watson, #ibmwatson, Jeopardy, POWER7, p750, supercomputer, TeraFlops, disk, SONAS, GPFS, SAS, Craig Rhinehart, Jon Lenchner, Hans Morvec, Carnegie Mellon University, CMU
Last week, I presented IBM's strategic initiative, the IBM Information Infrastructure, which is part of IBM's New Enterprise Data Center vision. This week, I will try to get around to talking about some of theproducts that support those solutions.
There has been a lot of attention on XIV in the past few weeks, so I will start with that. Steve Duplessie, anIT industry analyst from Enterprise Strategy Group (ESG) had a post [Adaptec buys Aristos, Tom Cruise, XIV, and Logical Assumptions] with some interesting observations and some sage advice.Val Bercovici on his NetApp Exposed blog, has a post [Has Storage Swift-Blogging Finally Jumped the Shark?] which blasts EMC for their negativity.
(For those not in the USA, swift-blogging is a reference tofalse accusations and negative remarks made during the U.S. 2004 presidential election by the[Swift Boat Veterans], and ["jumping the shark"] is a reference to [a TV show that ran out of interesting and relevant topics].For movie sequels, the comparable phrase is ["nuke the fridge"] in reference to the most recent Indiana Jones' movie.)
I was going to set the record straight on a variety of misunderstandings, rumors or speculations, but I think most have been taken care of already. IBM blogger BarryW covered the fact that SVC now supports XIV storage systems, in his post[SVC and XIV],and addressed some of the FUD already. Here was my list:
- Now that IBM has an IBM-branded model of XIV, IBM will discontinue (insert another product here)
I had seen speculation that XIV meant the demise of the N series, the DS8000 or IBM's partnership with LSI.However, the launch reminded people that IBM announced a new release of DS8000 features, new models of N series N6000,and the new DS5000 disk, so that squashes those rumors.
- IBM XIV is a (insert tier level here) product
While there seems to be no industry-standard or agreement for what a tier-1, tier-2 or tier-3 disk system is, there seemed to be a lot of argument over what pigeon-hole category to put IBM XIV in. No question many people want tier-1 performance and functionality at tier-2 prices, and perhaps IBM XIV is a good step at giving them this. In some circles, tier-1 means support for System z mainframes. The XIV does not have traditional z/OS CKD volume support, but Linux on System z partitions or guests can attach to XIV via SAN Volume Controller (SVC), or through NFS protocol as part of the Scale-Out File Services (SoFS) implementation.
Whenever any radicalgame-changing technology comes along, competitors with last century's products and architectures want to frame the discussion that it is just yet another storage system. IBM plans to update its Disk Magic and otherplanning/modeling tools to help people determine which workloads would be a good fit with XIV.
- IBM XIV lacks (insert missing feature here) in the current release
I am glad to see that the accusations that XIV had unprotected, unmirrored cache were retracted. XIV mirrors all writes in the cache of two separate modules, with ECC protection. XIV allows concurrent code loadfor bug fixes to the software. XIV offers many of the features that people enjoy in other disksystems, such as thin provisioning, writeable snapshots, remote disk mirroring, and so on.IBM XIV can be part of a bigger solution, either through SVC, SoFS or GMAS that provide thebusiness value customers are looking for.
- IBM XIV uses (insert block mirroring here) and is not as efficient for capacity utilization
It is interesting that this came from a competitor that still recommends RAID-1 or RAID-10 for itsCLARiiON and DMX products.On the IBM XIV, each 1MB chunk is written on two different disks in different modules. When disks wereexpensive, how much usable space for a given set of HDD was worthy of argument. Today, we sell you abig black box, with 79TB usable, for (insert dollar figure here). For those who feel 79TB istoo big to swallow all at once, IBM offers "capacity on demand" pricing, where you can pay initially for as littleas 22TB, but get all the performance, usability, functionality and advanced availability of the full box.
- IBM XIV consumes (insert number of Watts here) of energy
For every disk system, a portion of the energy is consumed by the number of hard disk drives (HDD) andthe remainder to UPS, power conversion, processors and cache memory consumption. Again, the XIV is a bigblack box, and you can compare the 8.4 KW of this high-performance, low-cost storage one-frame system with thewattage consumed by competitive two-frame (sometimes called two-bay) systems, if you are willing to take some trade-offs. To getcomparable performance and hot-spot avoidance, competitors may need to over-provision or use faster, energy-consuming FC drives, and offer additional software to monitor and re-balance workloads across RAID ranks.To get comparable availability, competitors may need to drop from RAID-5 down to either RAID-1 or RAID-6.To get comparable usability, competitors may need more storage infrastructure management software to hide theinherent complexity of their multi-RAID design.
Of course, if energy consumption is a major concern for you, XIV can be part of IBM's many blended disk-and-tapesolutions. When it comes to being green, you can't get any greener storage than tape! Blended disk-and-tapesolutions help get the best of both worlds.
Well, I am glad I could help set the record straight. Let me know what other products people you would like me to focus on next.
technorati tags: IBM, XIV, disk, storage, system, Steve Duplessie, ESG, Val Bercovici, NetApp, BarryW, SVC, DS8000, N6000, DS5000, mainframe, z/OS, CKD, SoFS, NFS, ECC, HDD, RAID, UPS, availability, reliability, performance, usability, blended disk-and-tape, green
It's official! My "blook" Inside System Storage - Volume I
is now available.
|This blog-based book, or “blook”, comprises the first twelve months of posts from this Inside System Storage blog,165 posts in all, from September 1, 2006 to August 31, 2007. Foreword by Jennifer Jones. 404 pages.|
- IT storage and storage networking concepts
- IBM strategy, hardware, software and services
- Disk systems, Tape systems, and storage networking
- Storage and infrastructure management software
- Second Life, Facebook, and other Web 2.0 platforms
- IBM’s many alliances, partners and competitors
- How IT storage impacts society and industry
You can choose between hardcover (with dust jacket) or paperback versions:
This is not the first time I've been published. I have authored articles for storage industry magazines, written large sections of IBM publications and manuals, submitted presentations and whitepapers to conference proceedings, and even had a short story published with illustrations by the famous cartoon writer[Ted Rall].
But I can say this is my first blook, and as far as I can tell, the first blook from IBM's many bloggers on DeveloperWorks, and the first blook about the IT storage industry.I got the idea when I saw [Lulu Publishing] run a "blook" contest. The Lulu Blooker Prize is the world's first literary prize devoted to "blooks"--books based on blogs or other websites, including webcomics. The [Lulu Blooker Blog] lists past year winners. Lulu is one of the new innovative "print-on-demand" publishers. Rather than printing hundredsor thousands of books in advance, as other publishers require, Lulu doesn't print them until you order them.
I considered cute titles like A Year of Living Dangerously, orAn Engineer in Marketing La-La land, or Around the World in 165 Posts, but settled on a title that matched closely the name of the blog.
In addition to my blog posts, I provide additional insights and behind-the-scenes commentary. If you go to the Luluwebsite above, you can preview an entire chapter in its entirety before purchase. I have added a hefty 56-page Glossary of Acronyms and Terms (GOAT) with over 900 storage-related terms defined, which also doubles as an index back to the post (or posts) that use or further explain each term.
So who might be interested in this blook?
- Business Partners and Sales Reps looking to give a nice gift to their best clients and colleagues
- Managers looking to reward early-tenure employees and retain the best talent
- IT specialists and technicians wanting a marketing perspective of the storage industry
- Mentors interested in providing motivation and encouragement to their proteges
- Educators looking to provide books for their classroom or library collection
- Authors looking to write a blook themselves, to see how to format and structure a finished product
- Marketing personnel that want to better understand Web 2.0, Second Life and social networking
- Analysts and journalists looking to understand how storage impacts the IT industry, and society overall
- College graduates and others interested in a career as a storage administrator
And yes, according to Lulu, if you order soon, you can have it by December 25.
technorati tags: IBM, blook, Volume I, Jennifer Jones, system, storage, strategy, hardware, software, services, disk, tape, networking, SAN, secondlife, Web2.0, facebook, Lulu, publishing, Blooker Prize, articles, magazines, proceedings, Ted Rall, insights, glossary, early-tenure, mentors, library, classroom, administrator, print, publish, on demand
IBM once again delivers storage innovation!
(Note: The following paragraphs have been updated to clarify the performance tests involved.)
This time, IBM breaks the 1 million IOPS barrier, achieved by running a test workload consisting of a 70/30 mix of random 4K requests. That is 70 percent reads, 30 percent writes, with 4KB blocks. The throughput achieved was 3.5x times that obtained by running the identical workload on the fastest IBM storage system today (IBM System Storage SAN Volume Controller 4.3),
and an estimated EIGHT* times the performance of EMC DMX. With an average response time under 1 millisecond, this solution would be ideal for online transaction processing (OLTP) such as financial recordings or airline reservations.
(*)Note: EMC has not yet published ANY benchmarks of their EMC DMX box with SSD enterprise flash drives (EFD). However, I believe that the performance bottleneck is in their controller and not the back-end SSD or FC HDD media, so I have givenEMC the benefit of the doubt and estimated that their latest EMC DMX4 is as fast as an[IBMDS8300 Turbo] with Fibre Channel drives. If or when EMC publishes benchmarks, the marketplace can make more accurate comparisons. Your mileage may vary.
IBM used 4 TB of Solid State Disk (SSD) behind its IBM SAN Volume Controller (SVC) technology to achieve this amazing result. Not only does this represent a significantly smaller footprint, but it uses only 55 percent of the power and cooling.
The SSD drives are made by [Fusion IO] and are different than those used by EMC made by STEC.
The SVC addresses the one key problem clients face today with competitive disk systems that support SSD enterprise flash drives: choosing what data to park on those expensive drives? How do you decide which LUNs, which databases, or which files should be permanently resident on SSD? With SVC's industry-leading storage virtualization capability, you are not forced to decide. You can move data into SSD and back out again non-disruptively, as needed to meet performance requirements. This could be handy for quarter-end or year-end processing, for example.
For more on this, see the [IBM Press Release] or thearticles in [Network World] by Jon Brodkin, and [Cnet News] by Brooke Crothers.
Our clients have often told us at IBM that performance is one of their top purchase criteria. IBM once again has shown that it listens to the marketplace!
technorati tags: IBM, SVC, million, IOPS, EMC, DMX, Network World, Cnet, Jon Brodkin, Brooke Crothers, benchmark, leading, performance, SSD, EFD, FC, HDD, disk, systems, media
As a consultant, I am often asked to help design the architecture for the information infrastructure. A usefulanalogy to gather requirements and preferences is the difference between area rugs
and wall-to-wall carpeting
. Arearugs are not secured to the floor and cover only a portion of the floor area. Carpets are generally tacked or cemented to the floor, often with an underlay of cushion padding, stretched across the entire floor surface, out to all four walls of each room.
Each has its pros and cons, and often is a matter of preference. Some people like area rugs because they can choosea different style for each room, match the decor and color scheme of furniture, and use these to define each livingspace. Ever since paleolithic man put animal skins on the floor of their cave, people recognize that cold, hard andugly floors could be covered up with something soft and more attractive.Others prefer wall-to-wall carpeting because they want to walk around the house barefoot, have their young children crawl on their hands and knees, and give the entire house a unified look and feel. This is often an inexpensive option when compared against the cost of individual rugs.
The same is true for an information infrastructure. For some, they prefer the "area rug" approach: this style ofstorage for their email, this other type of storage for their databases, and perhaps a third for their unstructuredfile systems. When customers ask what storage would I recommend for their SAP application, or their Microsoft Exchangeemail environment, or their Business Intelligence (BI) software, I recognize they are taking this "area rug" approach.
Like area rugs, having different storage can focus on specific attributes of the workload characteristics. It alsoinsulates against company-wide changes, the dreaded "rip-and-replace" of replacing all of your storage with somethingfrom a different vendor. With "area rug" storage, you can support a dual-vendor or multi-vendor strategy, and upgrade or replace each on its own schedule.
Thanks to open standards and industry-standard benchmarks, changing out one storage solution for another is assimple as rolling up an area rug, and putting another one in its place that is similar in size dimensions.
|Others may prefer "wall-to-wall carpeting" approach: one disk system type, one tape library type,one network type, that provides unified management and minimizes the needs for unique skills. Generally, the choice of NAS, SAN or iSCSI infrastrucutre is done company-wide, and might strongly influence the set of products that will support that decision. For example, those with a mix of mainframe and distributed servers looking for SAN-attached storage may look at an [IBM System Storage DS8000] and [TS3500 tape library] that can provide support for FICON and FCP.|
Those looking at NAS or iSCSI might consider the IBM System Storage N series products, "unified storage" supporting iSCSI, FCP and NAS protocols. If you want the "wall-to-wall" to stretch across all the sites in your globally integrated enterprise, IBM's scalable NAS product, Scale-Out File Services[SoFS], provides a global name spacein combination with a clustered file system that provides incredible scalability and performance based on field-proven technology used by the majority of the [Top 100 supercomputer] deployments.
IBM can help you design an information infrastructure that fits either approach.
technorati tags: IBM, DS8000, TS3500, NAS, SAN, iSCSI, FCP, FICON, mainframe, distributed, SoFS, supercomputer
I am still wiping the coffee off my computer screen, inadvertently sprayed when I took a sip while reading HDS' uber-blogger Hu Yoshida's post on storage virtualization andvendor lock-in
. This blog appears to be the text version of theirfunny video
While most of the post is accurate and well-stated, two opinions particular caught my eye. I'll be nice and call them opinions, since these are blogs, and always subject to interpretation. I'll put quotes around them so that people will correctly relate these to Hu, and not me.
"Storage virtualization can only be done in a storage controller. Currently Hitachi is the only vendor to provide this."
-- Hu Yoshida
Hu, I enjoy all of your blog entries, but you should know better. HDS is fairly new-comer to the storage virtualization arena, so since IBM has been doing this for decades, I will bring you and the rest of the readers up to speed. I am not starting a blog-fight, just want to provide some additional information for clients to consider when making choices in the marketplace.
First, let's clarify the terminology. I will use 'storage' in the broad sense, including anything that can hold 1's and 0's, including memory, spinning disk media, and plastic tape media. These all have different mechanisms and access methods, based on their physical geometry and characteristics. The concept of 'virtualization' is any technology that makes one set of resources look like another set of resources with more preferable characteristics, and this applies to storage as well as servers and networks. Finally, 'storage controller' is any device with the intelligence to talk to a server and handle its read and write requests.
Second, let's take a look at all the different flavors of storage virtualization that IBM has developed over the past 30 years.
IBM introduces the S/370 with the OS/VS1 operating system. "VS" here refers to virtual storage, and in this case internal server memory was swapped out to physical disk. Using a table mapping, disk was made to look like an extension of main memory.
IBM introduces the IBM 3850 Mass Storage System (MSS). Until this time, programs that ran on mainframes had to be acutely aware of the device types being written, as each device type had different block, track and cylinder sizes, so a program written for one device type would have to be modified to work with a different device type. The MSS was able to take four 3350 disks, and a lot of tapes, and make them look like older 3330 disks, since most programs were still written for the 3330 format. The MSS was a way to deliver new 3350 disk to a 3330-oriented ecosystem, and greatly reduce the cost by handling tape on the back end. The table mapping was one virtual 3330 disk (100 MB) to two physical tapes (50 MB each). Back then, all of the mainframe disk systems had separate controllers. The 3850 used a 3831 controller that talked to the servers.
IBM invents Redundant Array of Independent Disk (RAID) technology. The table mapping is one or more virtual "Logical Units" (or "LUNs") to two or more physical disks. Data is striped, mirrored and paritied across the physical drives, making the LUNs look and feel like disks, but with faster performance and higher reliability than the physical drives they were mapped to. RAID could be implemented in the server as software, on top or embedded into the operating system, in the host bus adapter, or on the controller itself. The vendor that provided the RAID software or HBA did not have to be the same as the vendor that provided the disk, so in a sense, this avoided "vendor lock-in".Today, RAID is almost always done in the external storage controller.
IBM introduces the Personal Computer. One of the features of DOS is the ability to make a "RAM drive". This is technology that runs in the operating system to make internal memory look and feel like an external drive letter. Applications that already knew how to read and write to drive letters could work unmodified with these new RAM drives. This had the advantage that the files would be erased when the system was turned off, so it was perfect for temporary files. Of course, other operating systems today have this feature, UNIX has a /tmp directory in memory, and z/OS uses VIO storage pools.
This is important, as memory would be made to look like disk externally, as "cache", in the 1990s.
IBM AIX v3 introduces Logical Volume Manager (LVM). LVM maps the LUNs from external RAID controllers into virtual disks inside the UNIX server. The mapping can combine the capacity of multiple physical LUNs into a large internal volume. This was all done by software within the server, completely independent of the storage vendor, so again no lock-in.
IBM introduces the Virtual Tape Server (VTS). This was a disk array that emulated a tape library. A mapping of virtual tapes to physical tapes was done to allow full utilization of larger and larger tape cartridges. While many people today mistakenly equate "storage virtualization" with "disk virtualization", in reality it can be implemented on other forms of storage. The disk array was referred to as the "Tape Volume Cache". By using disk, the VTS could mount an empty "scratch" tape instantaneously, since no physical tape had to be mounted for this purpose.
Contradicting its "tape is dead" mantra, EMC later developed its CLARiiON disk library that emulates a virtual tape library (VTL).
IBM introduces the SAN Volume Controller. It involves mapping virtual disks to manage disks that could be from different frames from different vendors. Like other controllers, the SVC has multiple processors and cache memory, with the intelligence to talk to servers, and is similar in functionality to the controller components you might find inside monolithic "controller+disk" configurations like the IBM DS8300, EMC Symmetrix, or HDS TagmaStore USP. SVC can map the virtual disk to physical disk one-for-one in "image mode", as HDS does, or can also map virtual disks across physical managed disks, using a similar mapping table, to provide advantages like performance improvement through striping. You can take any virtual disk out of the SVC system simply by migrating it back to "image mode" and disconnecting the LUN from management. Again, no vendor lock-in.
The HDS USP and NSC can run as regular disk systems without virtualization, or the virtualization can be enabled to allow external disks from other vendors. HDS usually counts all USP and NSC sold, but never mention what percentage these have external disks attached in virtualization mode. Either they don't track this, or too embarrassed to publish the number. (My guess: single digit percentage).
Few people remember that IBM also introduced virtualization in both controller+disk and SAN switch form factors. The controller+disk version was called "SAN Integration Server", but people didn't like the "vendor lock-in" having to buy the internal disk from IBM. They preferred having it all external disk, with plenty of vendor choices. This is perhaps why Hitachi now offers a disk-less version of the NSC 55, in an attempt to be more like IBM's SVC.
IBM also had introduced the IBM SVC for Cisco 9000 blade. Our clients didn't want to upgrade their SAN switch networking gear just to get the benefits of disk virtualization. Perhaps this is the same reason EMC has done so poorly with its "Invista" offering.
So, bottom line, storage virtualization can, and has, been delivered in the operating system software, in the server's host bus adapter, inside SAN switches, and in storage controllers. It can be delivered anywhere in the path between application and physical media. Today, the two major vendors that provide disk virtualization "in the storage controller" are IBM and HDS, and the three major vendors that provide tape virtualization "in the storage controller" are IBM, Sun/STK, and EMC. All of these involve a mapping of logical to physical resources. Hitachi uses a one-for-one mapping, whereas IBM additionally offers more sophisticated mappings as well.
technorati tags: IBM, disk, tape, storage, virtualization, Hu Yoshia, HDS, Hitachi, TagmaStore, USP, NSC, disk-less, SAN Volume Controller, LVM, AIX, RAID, SAN, blade, Sun, STK, Cisco, EMC, Invista,
In my post yesterday [Spreading out the Re-Replication process
], fellow blogger BarryB [aka The Storage Anarchist
]raises some interesting points and questions in the comments section about the new IBM XIV Nextra architecture.I answer these below not just for the benefit of my friends at EMC, but also for my own colleagues within IBM,IBM Business Partners, Analysts and clients that might have similar questions.
- If RAID 5/6 makes sense on every other platform, why not so on the Web 2.0 platform?
Your attempt to justify the expense of Mirrored vs. RAID 5 makes no sense to me. Buying two drives for every one drive's worth of usable capacity is expensive, even with SATA drives. Isn't that why you offer RAID 5 and RAID 6 on the storage arrays that you sell with SATA drives?Let's take a look at various disk configurations, for example 3TB on 750GB SATA drives:
And if RAID 5/6 makes sense on every other platform, why not so on the (extremely cost-sensitive) Web 2.0 platform? Is faster rebuild really worth the cost of 40+% more spindles? Or is the overhead of RAID 6 really too much for those low-cost commodity servers to handle.
- JBOD: 4 drives
- JBOD here is industry slang for "Just a Bunch of Disks" and was invented as the term for "non-RAID".Each drive would be accessible independently, at native single-drive speed, with no data protection. Puttingfour drives in a single cabinet like this provides simplicity and convenience only over four separate drivesin their own enclosures.
- RAID-10: 8 drives
- RAID-10 is a combination of RAID-1 (mirroring) and RAID-0 (striping). In a 4x2 configuration, data is striped across disks 1-4,then these are mirrored across to disks 5-8. You get performance improvement and protection against a singledrive failure.
- RAID-5: 5 drives
- This would be a 4+P configuration, where there would be four drives' worth of data scattered across fivedrives. This gives you almost the same performance improvement as RAID-10, similar protection againstsingle drive failure, but with fewer drives per usable TB capacity.
- RAID-6: 6 drives
- This would be a 4+2P configuration, where the first P represents linear parity, and the second represents a diagonal parity. Similar in performance improvement as RAID-5, but protects against single and double drive failures, and still better than RAID-10 in terms of drives per TB usable capacity.
For all the RAID configurations, rebuild would require a spare drive, but often spares are shared among multiple RAID ranks, not dedicated to a single rank. To this end, you often have to have several spares per I/O loop, and a different set of spares for each kind of speed and capacity. If you had a mix of 15K/73GB, 10K/146GB, and 7200/500GB drives, then you would have three sets of spares to match.
In contrast, IBM XIV's innovative RAID-X approach doesn't requireany spare drives, just spare capacity on existing drives being used to hold data. The objects can be mirroredbetween any two types of drives, so no need to match one with another.
All of these RAID levels represent some trade-off between cost, protection and performance, and IBM offers each of theseon various disk systems platforms. Calculating parity is more complicated than just mirrored copies, but this can be done with specialized chips in cache memory to minimize performance impact.IBM generally recommends RAID-5 for high-performance FC disk, and RAID-6 for slower, large capacity SATA disk.
However, the questionassumes that the drive cost is a large portion of the overall "disk system" cost. It isn't. For example,Jon Toigo discusses the cost of EMC's new AX4 disk system in his post [National Storage Rip-Off Day]:
- EMC is releasing its low end Clariion AX4 SAS/SATA array with 3TB capacity for $8600. It ships with four 750GB SATA drives (which you and I could buy at list for $239 per unit). So, if the disk drives cost $956 (presumably far less for EMC), that means buyers of the EMC wares are paying about $7700 for a tin case, a controller/backplane, and a 4Gbps iSCSI or FC connector. Hmm.
- Dell is offering EMC’s AX4-5 with same configuration for $13,000 adding a 24/7 warranty.
(Note: I checked these numbers. $8599 is the list price that EMC has on its own website. External 750GB drivesavailable at my local Circuit City ranged from $189 to $329 list price. I could not find anything on Dell'sown website, but found [The Register] to confirm the $13,000 with 24x7 warranty figure.)
Disk capacity is a shrinking portion of the total cost of ownership (TCO). In addition to capacity, you are paying forcache, microcode and electronics of the system itself, along with software and services that are included in the mix,and your own storage administrators to deal with configuration and management. For more on this, see [XIV storage - Low Total Cost of Ownership].
- EMC Centera has been doing this exact type of blob striping and protection since 2002
As I've noted before, there's nothing "magic" about it - Centera has been employing the same type of object-level replication for years. Only EMC's engineers have figured out how to do RAID protection instead of mirroring to keep the hardware costs low while not sacrificing availability.
I agree that IBM XIV was not the first to do an object-level architecture, but it was one of the first to apply object-level technologies to the particular "use case" and "intended workload" of Web 2.0 applications.
RAID-5 based EMC Centera was designed insteadto hold fixed-content data that needed to be protected for a specific period of time, such as to meet government regulatory compliance requirements. This is data that you most likelywill never look at again unless you are hit with a lawsuit or investigation. For this reason, it is important to get it on the cheapest storage configuration as possible. Before EMC Centera, customers stored this data on WORM tape and optical media, so EMC came up with a disk-only alternative offering.IBM System Storage DR550 offers disk-level access for themost recent archives, with the ability to migrate to much less expensive tape for the long term retention. The end result is that storing on a blended disk-plus-tape solution can help reduce the cost by a factor of 5x to 7x, making RAID level discussion meaningless in this environment. For moreon this, see my post [OptimizingData Retention and Archiving].
While both the Centera and DR550 are based on SATA, neither are designed for Web 2.0 platforms.When EMC comes out with their own "me, too" version, they will probably make a similar argument.
- IBM XIV Nextra is not a DS8000 replacement
Nextra is anything but Enterprise-class storage, much less a DS8000 replacement. How silly of all those folks to suggest such a thing.
I did searches on the Web and could not find anybody, other than EMC employees, who suggested that IBM XIV Nextra architecture represented a replacement for IBM System Storage DS8000. The IBM XIV press release does not mentionor imply this, and certainly nobody I know at IBM has suggested this.
The DS8000 is designed for a different "use case" andset of "intended workloads" than what the IBM XIV was designed for. The DS8000 is the most popular disk systemfor our IBM System z mainframe platform, for activities like Online Transaction Processing (OLTP) and large databases, supporting ESCON and FICON attachment to high-speed 15K RPM FC drives. Web 2.0 customers that might chooseIBM XIV Nextra for their digital content might run their financial operations or metadata search indexes on DS8000.Different storage for different purposes.
As for the opinion that this is not "enterprise class", there are a variety of definitions that refer to this phrase.Some analysts look at "price band" of units that cost over $300,000 US dollars. Other analysts define this as beingattachable to mainframe servers via ESCON or FICON. Others use the term to refer to five-nines reliability, havingless than 5 minutes downtime per year. In this regard, based on the past two years experience at 40 customer locations,I would argue that it meets this last definition, with non-disruptive upgrades, microcode updates and hot-swappable components.
By comparison, when EMC introduced its object-level Centera architecture, nobody suggested it was the replacement for their Symmetrix or CLARiiON devices. Was it supposed to be?
- Given drive growth rates have slowed, improving utilization is mandatory to keep up with 60-70 percent CAGR
Look around you, Tony- all of your competitors are implementing thin provisioning specifically to drive physical utilization upwards towards 60-80%, and that's on top of RAID 5/RAID 6 storage and not RAID 1. Given that disk drive growth rates and $/GB cost savings have slowed significantly, improving utilization is mandatory just to keep up with the 60-70% CAGR of information growth.
Disk drive capacities have slowed for FC disk because much of the attention and investment has been re-directed to ATA technology. Dollar-per-GB price reduction is slowing for disks in general, as researchers are hitting physicallimitations to the amount of bits they can pack per square inch of disk media, and is now around 25 percent per year.The 60-70 percent Compound Annual Growth Rate (CAGR) is real, and can be even growing faster for Web 2.0providers. While hardware costs drop, the big ticket items to watch will be software, services and storage administrator labor costs.
To this end, IBM XIV Nextra offers thin provisioning and differential space-efficient snapshots. It is designed for 60-90 percent utilization, and can be expanded to larger capacities non-disruptively in a very scalable manner.
Well, I hope that helps clear some things up.
technorati tags: IBM, XIV, Nextra, EMC, BarryB, RAID-0, RAID-1, RAID-5, RAID-6, RAID-10, RAID-X, AX4, Dell, AX4-5, FC, SAS, SATA, iSCSI, TCO, blob, object-level, disk, storage, system, Centera, ESCON, FICON, Symmetrix, CLARiiON, ATA, CAGR, Web2.0
Every year, I teach hundreds of sellers how to sell IBM storage products. I have been doing this since the late 1990s, and it is one task that has carried forward from one job to another as I transitioned through various roles from development, to marketing, to consulting.
This week, I am in the city of Taipei [Taipei] to teach Top Gun sales class, part of IBM's [Sales Training] curriculum. This is only my second time here on the island of Taiwan.
As you can see from this photo, Taipei is a large city with just row after row of buildings. The metropolitan area has about seven million people, and I saw lots of construction for more on my ride in from the airport.
The student body consists of IBM Business Partners and field sales reps eager to learn how to become better sellers. Typically, some of the students might have just been hired on, just finished IBM Sales School, a few might have transferred from selling other product lines, while others are established storage sellers looking for a refresher on the latest solutions and technologies.
I am part of the teach team comprised of seven instructors from different countries. Here is what the week entails for me:
- Monday - I will present "Selling Scale-Out NAS Solutions" that covers the IBM SONAS appliance and gateway configurations, and be part of a panel discussion on Disk with several other experts.
- Tuesday - I have two topics, "Selling Disk Virtualization Solutions" and "Selling Unified Storage Solutions", which cover the IBM SAN Volume Controller (SVC), Storwize V7000 and Storwize V7000 Unified products.
- Wednesday - I will explain how to position and sell IBM products against the competition.
- Thursday - I will present "Selling Infrastructure Management Solutions" and "Selling Unified Recovery Management Solutions", which focus on the IBM Tivoli Storage portfolio, including Tivoli Storage Productivity Center, Tivoli Storage Manager (TSM), and Tivoli Storage FlashCopy Manager (FCM). The day ends with the dreaded "Final Exam".
- Friday - The students will present their "Team Value Workshop" presentations, and the class concludes with a formal graduation ceremony for the subset of students who pass. A few outstanding students will be honored with "Top Gun" status.
These are the solution areas I present most often as a consultant at the IBM Executive Briefing Center in Tucson, so I can provide real-life stories of different client situations to help illustrate my examples.
To learn more about a Top Gun class in your area, see the [Top Gun class schedule].
The weather here in Taipei calls for rain every day! I was able to take this photo on Sunday morning while it was still nice and clear, but later in the afternoon, we had quite the downpour. I am glad I brought my raincoat!
technorati tags: IBM, Sales Training, Top Gun, Taipei, Taiwan, NAS, SONAS, disk, virtualization, unified+storage, SAN Volume Controller, SVC, Storwize V7000, Storwize V7000 Unified, Infrastructure Management, Tivoli Storage, Productivity Center, TPC, Unified Recovery Management, TSM, FlashCopy, FCM