This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections Platform is now in read-only mode and content is only available for viewing. No new wiki pages, posts, or messages may be added. Please see our FAQ for more information. The developerWorks Connections platform will officially shut down on March 31, 2020 and content will no longer be available. More details available on our FAQ. (Read in Japanese.)
Next Monday, September 1, 2008, marks my two year "blogoversary" for this blog!
I won't be blogging on Monday, of course, because that is [Labor Day] holiday here in the United States.
(From a Canadian colleague: US is not the only country who celebrates Labor Day on the first weekend in September. Canada also celebrates Labour Day on the first weekend in September. It's the only holiday(other than Christmas/New Years) where we are in sync with US. Our Thanksgiving Days are different as is your July 4 vs our July 1. But for Labour Day we are one with the Borg...)
(From an Australian colleague: each province of Australia has its own day to celebrate Labor Day, see [Australia Public Holidays])
The rest of the world celebrates Labor Day on May 1, but the USA celebrates this on the first Monday of September, which this year lands on September 1.Originally, the day is intended to be a "day off for working citizens", IBM is kind enough to let managers and marketingpersonnel have the day off also. (Not that anyone is going to notice no press releases next Monday, right?)
I started this blog on September 1, 2006 as part of IBM's big["50 Years of Disk Systems Innovation"] campaign. IBM introduced the first commercial disk system on September 13, 1956 and so the 50th anniversary was in 2006. Last year, IBM celebrated the 55th anniversary of tape systems.
Several readers have asked me why I haven't talked about recent current events, such as the Olympic Games in Beijing, or the U.S. National Conventions for the race for U.S. President. I have to remind them of one of the key precepts of IBMblogging guidelines:
8. Respect your audience. Don’t use ethnic slurs, personal insults, obscenity, or engage in any conduct that would not be acceptable in IBM’s workplace. You should also show proper consideration for others’ privacy and for topics that may be considered objectionable or inflammatory - such as politics and religion.
I made subtle references to my senator from Arizona, John McCain, in my post [ILM for my iPod], and to Barack Obama in my post [Searching for matching information]. I don't think anyone would mind that I send a "Happy Birthday!" wish to both of them.Senator McCain turns 72 years old today, and Senator Obama turned 47 years old earlier this month.
And lastly, Tucson itself [celebrates this entire month] its 233rd birthday. That's right,Tucson, the 32nd largest city of the USA, and headquarters for IBM System Storage, is older than the USA itself.While the Tucson area has been continuously inhabited by humans for over 3500 years, it officially became Tucsonon August 20, 1775.
Fellow blogger Justin Thorp has opined that [blogging is like jogging]. Somedays, you are just too busy to do it, and other days, you make time for it, because you know it is important.For the record, it is not my job to blog for IBM, that ended last September 2007. I continue to blog anyways because I have benefited from it, both personally and professionally.I want to thank all of you readers out there for making this blog a great success! Being named one of the top 10 blogs of the IT storage industry by Network World, two back-to-back Brand Impact awards from Liquid Agency, and recently earning a "31" Technorati ranking, has really helped keep me going.
So, I look forward to next month, and beginning my third year on this blog. I am sure there will be lots of surprises and announcements you can all look forward to in the next coming weeks and months that I will have plenty to write about.
It's Tuesday, which means IBM makes its announcements. We had several for the IBM System Storage product line. Here's a quick recap.
The IBM System Storage DS3000 now offers DC power models.New DC powered models of the DS3200, DS3400, and EXP3000 are well suited for Telco industry environments, as theseare NEBS and ETSI compliant and are powered by an industry standard 48 volt DC power source.
Also, the IBM System Storage N series now supports750GB SATA drives available for the EXN1000 drawer.
IBM Virtualization Engine TS7740now supports 3-cluster grids. Unlike 3-way replication on disk mirroring, such as IBM Metro/Global Mirror for the DS8000 that enforces a primary, secondary and tertiary copy, the grid implementation of TS7740 tape virtualization allows for any-to-any mirroring. Existing standalone TS7740 clusters can be converted to grid-enabled. A "Copy Export" feature allows virtual tapes to be exported onto physical tape. And in keeping with our theme of "enabling business flexibility", performance throughput can now be purchased in 100 MB/sec increments, up to 600 MB/sec, to match your workload bandwidth requirements.
The IBM System Storage TS1120drives installed in the IBM System Storage™ TS3400 Tape Library can now be attached to System z platforms using the IBM System Storage™ TS1120 Tape Controller. Before this, the TS3400 could only be attached to UNIX, Windows and Linux systems.
The IBM System StorageTS2230 Express is offered as an external stand-alone or rack-mountable unit. This model incorporates the new LTO IBM Ultrium 3 Serial Attached SCSI (SAS) Half-High Tape Drive, and a 3 Gbps single port SAS interface for a connection to a wide spectrum of distributed system servers that support Microsoft Windows and Linux systems.
IBM has added theCisco MDS 9124 for IBM System Storageentry-level fabric switch as an Express offering and part of the IBM Express Advantage Program. Express offerings are specifically created for mid-market companies and are well suited for workgroup storage applications like e-mail serving, collaborative databases and web serving. They bring enterprise-class performance, scalability and features to small and medium-sized companies and are easy to use, highly scalable, and cost-effective.This will make it easier for IBM Business Partners to provide fabric switch connectivity for:
Storage consolidation solutions with IBM System Storage™ DS4000 Express disk arrays, especially the DS4700 Express.
Backup / restore solutions with IBM System Storage™ TS3000 Tape Libraries, such as the TS3200.
Archive and Retention
Ordering large configurations of the IBM System Storage Grid Access Manager just got a lot easier.New features enable configurations greater than 500 TB to be submitted as a single order. No change in the actualproduct, just an improvement in the ordering process.
For System p and System i servers, the IBM 3996 Optical library now supports Gen 2 60GB optical cartridges. These can be read/write or WORM cartridges.
I'm off to Denver, Colorado this week. I hope it is cooler there than it is down here in Tucson, Arizona.
The proof-of-concept that IBM Haifa research center developed back in 1998 became what we now call the iSCSI protocol.The book iSCSI: The Universal Storage Connection introduces the history as follows:
In the fall of 1999 IBM and Cisco met to discuss the possibility of combining their SCSI-over-TCP/IP efforts. After Cisco saw IBM's demonstration of SCSI over TCP/IP, the two companies agreed to develop a proposal that would be taken to the IETF for standardization.
There are three ways to introduce iSCSI into your data center:
Through a gateway, like the IBM System Storage N series gateway, that allows iSCSI-based servers connect to FC-based storage devices
Through a SAN switch or director, a FC-based server can access iSCSI-based storage, an iSCSI-based server accessing FC-based storage, or even iSCSI-based servers attaching to iSCSI-based storage.
Directly through the storage controller.
IBM has been delivering the first method with its successful IBM System Storage N series gateway products, buttoday we have announced additional support for the second and third methods.Here's a quick recap.
New SAN director blades
Supporting the second method, IBM TotalStorage SAN256B Director is enhanced to deliver iSCSI functionality with a new M48 iSCSI Blade, which includes 16 ports (8 Fibre Channel ports; and 8 Ethernet ports for iSCSI connectivity). We also announced a new Fibre Channel M48 Blade which provides 10 Gbps Fibre Channel Inter Switch Link (ISL) connectivity between SAN256B Directors.
With support for Boot-over-iSCSI, diskless rack-optimized and blade servers can boot Windows or Linux over Ethernet,eliminating the management hassles with internal disk.
All of this is part of IBM's overall push into the Small and Medium size Business marketplace, making it easier to shop for and buy from IBM and its many IBM Business Partners, easier to deploy and install storage, and easier tomanage the storage once you have it.
Well it's Tuesday, which means its time to look at recent announcements.While I was on vacation last week, IBM made a lot of storage announcements October 23.Josh Krischer gives his summary on WikiBon [October 2007 Review].Austin Modine of the The Register went so far as to say that [IBM goes crazy with storage system updates].
IBM System Storage DS8000 series
This is "Release 3" software/microcode upgrades on our existing "Turbo" hardware.
IBM FlashCopy SE -- Here "SE" stands for Space Efficient. Rather than allocating a full 100% of the space for the FlashCopy destination, you can set aside just a fraction, and this will hold all the changed blocks, similar to whatIBM already offers on the DS4000 series.
Dynamic Volume Expansion -- In the past, if you needed more space for a LUN, you had to carve out a newer one elsewhere, and then copy the data over from the old to the new, leaving the old LUN around to be re-used or leftstranded. With this enhancement, you can just upgrade the LUN in place, making it bigger as needed, similar to whatIBM already offers on the DS4000 series and SAN Volume Controller. This applies to CKD volumes for the System zmainframe users out there as well.
Storage Pool Striping -- striping volumes across RAID ranks to eliminate or reduce hot-spots, and provide betterload balancing. Many used SAN Volume Controller in front of the DS8000 to do this, but now you can do it natively inthe DS8000 itself.
z/OS Global Mirror Multiple Reader -- for System z customers, "z/OS Global Mirror" is the new name for XRC. Thisenhancement improves the throughput of sending updates to the remote disaster recovery location.
DS Storage Manager enhancements, the element manager software has been enhanced, and is pre-installed on the new IBM System Storage Productivity Center, which I will talk about below.
Intermix of DS8000 machine types -- this is especially useful to allow new frames to have co-terminating warrantieswith the base units. In other words, as you expand your system, you can ensure that the entire chunk of iron runs outof warranty all at the same time, to simplify your decision making process to upgrade or contract for extended service.
One of the biggest complaints about IBM TotalStorage Productivity Center is that it is software that needs to beinstalled on its own server, and that this installation process can take a day or two. Why wait? Now you can havea hardware console that has the DS8000 Storage Manager software, SVC Admin Console software, and IBM TotalStorageProductivity Center "Basic Edition" pre-installed. Here are the key features.
Pre-installed and tested console
DS8000 R3 GUI integration
Cohabitation of SVC 4.2.1 GUI and CIMOM
Automated device discovery
Asset and capacity reporting, including tape library support
Our "Release 9" applies across the board, from N3000 to N5000 to N7000 series models, includingnew host bus adapters, and the new Data OnTAP 7.2.4 release level.
The Virtual File Manager (VFM) was announced as one of our latest [Storage Virtualization Solutions]. VFMprovides a global namespace that aggregates the file systems from Linux, UNIX, and Windows file servers, as well asN series storage, into a consolidated environment.
IBM's virtual tape library (VTL) for the distributed systems platform, has been enhanced to provide:
Up to 12TB of disk cache, using 750GB SATA disk.
F05 Tape Frames installed as TS7520 base units through a 32 port fibre channel switch
Support for LTO generation 4 tape drives, both as virtual tape drives and as physical tape drives within IBM automated tape libraries attached to the TS7520. This allows you to use Encryption capabilities of LTO4.
DS3000 series now supports SATA disk, and can be attached to AIX and Linux on System p servers. This appliesto the DS3200, DS3300 and DS3400 models.See the [DS3000 Announcement Letter] for more details.
Well, its Tuesday, and that means more IBM announcements!!!
Let's do a quick recap of what was announced for storage:
We now support 1000GB SATA-II drives in the DS4000 series. This is available for the DS4200 model 7V, DS4700, DS4800 as well as the expansion drawers EXP420 and EX810. When I asked our marketing team why we weren't going to say "1TB" like everyone else, they thought 1000GB sounds bigger. I guess I should not have asked that on April Fool's day. For more details, see the IBM press releases for the [DS4200/EXP420and DS4700/DS4800/EXP810].
IBM announced new machine code Release 1.4a for the The IBM Virtualization Engine™ TS7700 virtual tape library for our System z mainframe customers.Various features come with this new level of machine code. See the IBM [Press Release] for more details.
Load balancing across the grid
Host control over the copy of logical volumes on a cluster by cluster basis
Option to gracefully remove an individual cluster from an existing grid
Initial-state reset for TS7700 database for cluster cleanup
Option to upgrade single-cache to dual-cache configuration
Also announced were updates to the 7214 model 1U2. Technically this is not in the IBM System Storage product line,but instead is designed specifically for our System p server line. This is a "media drawer" that allows you to havetape on one side, and optical on the other, in a single enclosure. IBM announced that you can now have DAT160 80GBdrives that is read-write compatible with DAT72 and DDS4 drives, and half-high LTO-4 drives that can read LTO-2 media, and is read-write compatible with LTO-3 media.Read the IBM [Press Release] for details.
Finally, if you are in the United States, Canada or the Carribean, there is a special discount promotionfor tape libraries purchased before June 20, 2008. This includes IBM TS3100, TS3200, TS3310 and TS3500 libraries.See the [Promotion Details] for eligibility.
IBM has added capability to the IBM TotalStorage Productivity Center for Replication. A quick review of the differentoptions for this component.
base Replication (uni-directional from primary to disaster site)
Two-site replication (bi-directional, including failover and failback)
Three-site replication (site awareness for all the copy sessions between all three sites in all situations)
Productivity Center for Replication supported all these levels for DS8000, DS6000 and ESS 800 disk models, butfor SVC it only supported FlashCopy and Metro Mirror for the uni-directional base. IBM announced version 3.4 today that has added support for SVC for Global Mirror (asynchronous disk mirroring) and bi-directional failover/failback. This supports lets you have "practice volumes" that allow IT managers to perform "disaster recovery exercises" without disrupting production workloads.
Also, for the DS8000, there is support for the new Space Efficient FlashCopy and DynamicVolume Expansion features. Here is the IBM
The Productivity Center for Replication server can run on either a Windows/Linux-x86 server or a z/OS mainframe server.The Productivity Center for Replication on System z offers all the same new support for SVC and DS8000, as well asincorporated Basic HyperSwap capability that I mentioned in my post last February[DS8000 Enhancements for the IBM System z10 EC].
Here are the IBM press releases for the TotalStorage Productivity Center for Replication on[Windows/Linux-x86and System z] servers.
I'm at a Business Partner conference today, discussing these announcements and other topics, so need to go back to those festivities.