Comments (5) Visits (16442)
Perhaps I wrapped up my exploration of disk system performance one day too early. (While it is Friday here in Malaysia, it is still only Thursday back home)
Barry Burke, EMC blogger (aka The Storage Anarchist) writes:
Aren't you mixing metrics here?
This is a fair question, Barry, so I will try to address it here.
It was not a typo, I did mean MPG (miles per gallon) and not MPH (miles per hour). It is always challenging to find an analogy that everyone can relate to explain concepts in Information Technology that might be harder to grasp. I chose MPG because it was closely related to IOPS and MB/s in four ways:
It seemed that if I was going to explain why standardized benchmarks were relevant, I should find an analogy that has similar features to compare to. I thought about MPH, since it is based on time units like IOPS and MB/s, butdecided against it based on an earlier comment you made, Barry, about NASCAR:
Let's imagine that a Dodge Charger wins the overwhelming majority of NASCAR races. Would that prove that a stock Charger is the best car for driving to work, or for a cross-country trip?
Your comparison, Barry, to car-racing brings up three reasons why I felt MPH is a bad metric to use for an analogy:
You also mention, Barry, the term "efficiency" but mileage is about "fuel economy".Wikipedia is quick to point out that the fuel efficiency of petroleum engines has improved markedly in recent decades, this does not necessarily translate into fuel economy of cars. The same can be said about the performance of internal bandwidth ofthe backplane between controllers and faster HDD does not necessarily translate to external performance of the disk system as a whole. You correctly point this out in your blog about the DMX-4:
Complementing the 4Gb FC and FICON front-end support added to the DMX-3 at the end of 2006, the new 4Gb back-end allows the DMX-4 to support the latest in 4Gb FC disk drives.
This also explains why the IBM DS8000, with its clever "Adaptive Replacement Cache" algorithm, has such highSPC-1 benchmarks despite the fact that it still uses 2Gbps drives inside. Given that it doesn't matter between2Gbps and 4Gbps on the back-end, why would it matter which vendor came first, second or third, and why call it a "distant 3rd" for IBM? How soon would IBM need to announce similar back-end support for it to be a "close 3rd" in your mind?
I'll wrap up with you're excellent comment that Watts per GB is a typical "green" metric. I strongly support the whole"green initiative" and I used "Watts per GB" last month to explain about how tape is less energy-consumptive than paper.I see on your blog you have used it yourself here:
The DMX-3 requires less Watts/GB in an apples-to-apples comparison of capacity and ports against both the USP and the DS8000, using the same exact disk drives
It is not clear if "requires less" means "slightly less" or "substantially less" in this context, and have no facts from my own folks within IBM to confirm or deny it. Given that tape is orders of magnitude less energy-consumptive than anything EMC manufacturers today, the point is probably moot.
I find it refreshing, nonetheless, to have agreed-upon "energy consumption" metrics to make such apples-to-apples comparisons between products from different storage vendors. This is exactly what customers want to do with performance as well, without necessarily having to run their own benchmarks or work with specific storage vendors. Of course, Watts/GB consumption varies by workload, so to make such comparisons truly apples-to-apples, you would need to run the same workload against both systems. Why not use the SPC-1 or SPC-2 benchmarks to measure the Watts/GB consumption? That way, EMC can publish the DMX performance numbers at the same time as the energy consumption numbers, and then HDS can follow suit for its USP-V.
I'm on my way back to the USA soon, but wanted to post this now so I can relax on the plane.
technorati tags: IBM, EMC, Storage Anarchist, MPG, MPH, IOPS, NASCAR, Malaysia, Watts, GB, green, back-end, DMX-3, DMX-4, HDS, USP, USP-V, SPC, SPC-1, SPC-2, standardized, benchmarks, workload, DS8000, disk, storage, tape[Read More]
Stephen Colbert, of The Colbert Report, explains the name changes in recent mergers of the Telecommunications industry. A discussion on "changing names" and how that impacts storage seems like a good way to wrap up the week's theme on naming conventions.
Name changes are sometimes painful, but often times done for a purpose, such as to promote a family. In the US, when a man and woman marries, the woman often changes her family name to match her husband, and the kids all adopt the father's family name. I say "often" because there are times where the woman keeps her name, or adds to it in a hyphenated way. ABC News reported that a Man Fights to Take Wife's Name in Marriage. KipEsquire, a lawyer, writes about it in his blogA stitch in haste.
IT industry changes the names of products that people knew as something else. Other times, they re-use an existing name, when really it is or should be different from the original. Last year, I took on the job of helping transition from our brand "TotalStorage" to the "System Storage" product line under the new "IBM Systems" brand. I help decide what stays the same name or what changes, when it should change, and how to announce that change.
On the disk side, IBM renamed Fibre Array Storage Technology, or FAStT, which was pronounced exactly like "fast", to DS4000 series. This was a big improvement, as people couldn't seem to spell it properly, with variations like "FastT". Nor could people pronounce it properly, saying "fast-tee" instead. The advantage of "DS" is that it is both easy to spell, and easy to pronounce. The DS4000 series continues to be "fast", providing excellent performance for its midrange price category.
IBM's Enterprise Storage Server (ESS) line went from model E10, to F20, to 750 and 800. When IBM came out with its replacement, the IBM TotalStorage DS8000, some people asked why it wasn't named the ESS 900, for example. The DS8000 is quite different internally, new hardware design and implementation, but is highly compatible with the ESS line, and shares much of the same functionality from microcode. Last year, it was replaced by the IBM System Storage DS8000 Turbo. Again, newer hardware, so it was easy to justify the new name change from "TotalStorage" to "System Storage".
Renaming a product risks losing its certifications and awards. For example, IBM spent a lot of time and money getting the OS/390 operating system certified as a "UNIX" platform. When it was renamed to z/OS, IBM had to do it all over again. Learning from this experience, IBM decided not to rename the SAN Volume Controllerto a new designation like "DS5750", as it enjoys the "number one" spot on both the SPC-1 and SPC-2 performance benchmarks, and is recognized as the leader in the disk storage virtualization marketplace. Renaming this product would mean losing that collateral.
IBM's "other disk systems" the N series posed another set of challenges. The current DS line already has entry-level (DS3000), midrange (DS4000) and enterprise-class (DS6000 and DS8000) products. The OEM agreement that IBM has with Network Appliance (NetApp) resulted in a new set of entry-level, midrange, and enterprise-class products. But these didn't fit nicely into the DS3000-to-DS8000 continuum. Instead, IBM decided to go with N series, using N3000 for entry-level, N5000 for midrange, and N7000 for enterprise-class. These are different than the numbers used by NetApp for their comparable, but not identical, offerings.
On the tape side, IBM decided to name the tape drives TS1000 and TS2000 range, tape libraries and automation with a TS3000 range, and tape virtualization to the TS7000 range. A lot of tape products already had 3000 numbering that had to change to fit this new scheme. This is why IBM's popular 3592 tape drive was renamed to the TS1120. The replacement to the 3494 Virtual Tape Server was named TS7700 Virtualization Engine.
Obviously, you can't change the names of products that are currently in the field, but what about existing software with minor updates? IBM decided to leave "TotalStorage Produtivity Center" under the "TotalStorage" brand until it has a significant version upgrade. Many people say "TPC" as a convenient acronym when referring to this product, but TPC is a registered trademark of the Professional Golfers Association (PGA) to refer to its "Tournament Players Club".
How can anyone confuse "managing storage" with "playing golf"? One activity is full of frustration that takes years or decades to master, involving the need to understand a variety of equipment and techniques to use each properly to accomplish your goals; and the other is an enjoyable activity, immediately productive in front of a single pane of glass managing all of your DAS, SAN and NAS storage, from reporting on your files and databases to managing storage networks and tape libraries.
Enjoy the weekend!
technorati tags: Stephen Colbert, Colbert Report, Telecommunications industry, KipEsquire, IBM, FAStT, DS4000, DS3000, DS8000, OS/390, UNIX, z/OS, SAN Volume Controller, N series, TS1120, TS7700, TotalStorage Productivity Center, TPC, PGA, Golf[Read More]
This week and next I am touring Asia, meeting with IBM Business Partners and sales repsabout our July 10 announcements.
Clark Hodge might want to figure out where I am, given the nuclearreactor shutdowns from an earthquake in Japan. His theory is that you can follow my whereabouts just by following the news of major power outages throughout the world.
So I thought this would be a good week to cover the topic of Business Continuity, which includes disaster recovery planning. When making Business Continuity plans, I find it best to work backwards. Think of the scenarios that wouldrequire such recovery actions to take place, then figure out what you need to have at hand to perform the recovery, and then work out the tasks and processes to make sure those things are created and available when and where needed.
I will use my IBM Thinkpad T60 as an example of how this works. Last week, I was among several speakers making presentations to an audience in Denver, and this involved carrying my laptop from the back of the room, up to the front of the room, several times. When I got my new T60 laptop a year ago, it specifically stated NOT to carry the laptop while the disk drive was spinning, to avoid vibrations and gyroscopic effects. It suggested always putting the laptop in standby, hibernate or shutdown mode, prior to transportation, but I haven't gotten yet in the habit of doing this. After enough trips back and forth, I had somehow corrupted my C: drive. It wasn't a complete corruption, I could still use Microsoft PowerPoint to show my slides, but other things failed, sometimes the fatal BSOD and other times less drastically. Perhaps the biggest annoyance was that I lost a few critical DLL files needed for my VPN software to connect to IBM networks, so I was unable to download or access e-mail or files inside IBM's firewall.
Fortunately, I had planned for this scenario, and was able to recover my laptop myself, which is important when you are on the road and your help desk is thousands of miles away. (In theory, I am now thousands of miles closer to our help desk folks in India and China, but perhaps further away from those in Brazil.) Not being able to respond to e-mail for two days was one thing, but no access for two weeks would have been a disaster! The good news: My system was up and running before leaving for the trip I am on now to Asia.
Following my three-step process, here's how this looks:
technorati tags: IBM, July, announcements, earthquake, Japan, nuclear reactor, power, outage, business, continuity, disaster, recovery, plan, plans, planning, IBM, Thinkpad, T60, laptop, Windows, Denver, BSOD, VPN, India, China, Brazil, help desk, Asia, Tivoli, Storage, Manager, TSM, BMR, external, USB, bootable, CD, DVD, separating, programs, data, Clark Hodge[Read More]
Comments (5) Visits (10785)
Continuing my quest to "set the record straight" about [IBM XIV Storage System] and IBM's other products, I find myself amused at some of the FUD out there. Some are almost as absurd as the following analogy:
The conclusion we are led to believe is that hiring Mr. Jones, a human being, is as risky as puttinga banana peel down on the sidewalk. Some bloggers argue that they are merely making a series of factual observations,and letting their readers form their own conclusions. For example, the IBM XIV storage system has ECC-protected mirrored cache writes. Some false claims about this were [properly retracted]using
While it is possible to compare bananas and humans on a variety of metrics--weight, height, and dare I say it,caloric value--it misses the finer differences of what makes them different. Humans might share 98 percent withchimpanzees, but having an opposable thumb allows humans to do things that
Full Disclosure: I am neither vegetarian nor cannibal, and harbor no ill will toward bananas nor chimpanzees.No bananas or chimpanzees were harmed in the writing of this blog post. Any similarity between the fictitiousMr. Jones in the above analogy and actual persons, living or dead, is purely coincidental.
So let's take a look at some of IBM XIV Storage System's "opposable thumbs".
Fellow blogger from EMC Mark Twomey on his StorageZilla blog, posted about [Steinhardt's Rule of Customer Beliefs] with his own Twomey Corollary. Here is an excerpt:
In priority order, customers believe:
In the case of IBM XIV Storage System, it is not clear whether
That said, feel free to comment below on which of these you think the last two points of Steinhardt's rule istrying to capture. Certainly, I can't argue with the top two: a customer's own experience and the experiencesof other customers, which I mentioned previously in my post[Deceptively Delicious].
technorati tags: IBM, XIV, storage, system, banana, ECC, protected, mirrored, cache, writes, RAID, SnapShot, consistent performance, thin provisioning, Mark Twomey, StorageZilla, Steinhardt, NaviSite, customer reference[Read More]
My father's favorite question is "What's the worst that could happen?" He is retired now, but workedat the famous [Kitt Peak National Observatory] designing some of the largesttelescopes. Designing telescopes followed well-established mechanical engineering best practices, but each design was unique,so there was always a chance that the end result would not deliver the expected results. What's the worst that can happen? For telescopes, a few billion dollars are wasted and a few years are added to the schedule. Scrap it and start over. Nothing unrecoverable for the US government with unlimited resources and patience.
Over the weekend, we discussed the lawsuit to stop CERN from potentially destroying the planet. Dennis Overbye writes about this in his New York Times article titled["Asking a Judge to Save the World, and Maybe a Whole Lot More"]. Here's an excerpt:
... the rest of the grimness on the front page today will matter a bit, though, if two men pursuing a lawsuit in federal court in Hawaii turn out to be right. They think a giant particle accelerator that will begin smashing protons together outside Geneva this summer might produce a black hole or something else that will spell the end of the Earth — and maybe the universe.
What's the worst that can happen? Scientists now agree that it is sometimes difficult to predict, and someeffects may be unrecoverable.
Unfortunately, this is not the only example of people attempting things they may not understand well enough. Theweb comic below has someone complaining they are out of disk space, and the sales rep suggests solving this with a few commands which will result in deleting all her files. Hopefully, most people reading will recognize this is meant as humor, and not actually attempt the code fragments to "see what they do".
Sadly, I often encounter clients who have a "keep forever" approach to their production data. When they are seriously out of space, they feel forced to either buy more disk storage, or start "the big Purge": deleting rows from their database tables, emails older than 90 days, or some other drastic measures. With a focus on keeping down IT budgets, I fear that thesedrastic measures are growing more common. What's the worst that could happen? You might need that data for defending yourself against a lawsuit, or need it to continue to provide service to a loyal client, or just continue normal business operations.I have visited companies where a junior administrator chose the "big Purge" option, without a full understanding ofwhat they were doing, resulting in business disruption until the data could be recovered or re-entered.
IBM offers a better way. Data that may not be needed on disk forever could be moved to lower-cost tape, using up less energy and less floorspace in your data center. Solutions can automatically delete the data systematically based on chronological or event-based retention policies, with the option to keep some data longer in response to a "legal hold" request.
That's certainly better than to risk shrinking your business into a "dense dead lump"!Read More]