On the news today, they mentioned it was "Happy Pi Day". Today is the 14th day of the 3rd month, and "pi" is about 3.14159, the ratio of the circumference of a circle to its diameter. So, in Tucson it is celebrated on 3/14, at 1:59pm MST.
The ratio has a lot to do with storage.
The value of "pi" has been calculated to over a billion significant digits. Here is a cuteapplet to use if you ever need the value to any level of accuracy.
Yesterday, most of the USA moved its clocks forward an hour. Arizona and Hawaii don't bother, as there is plenty of daylight in both states. While it may seem that Arizonans are not "affected" by Daylight Saving Time (DST), we are, because we have to deal with the time zone offsets with those we talk to in other states. (Note: it is SAVING not SAVINGS, many people mistakenly say "Daylight Savings Time", which is incorrect).
Year round, Arizona is on Mountain Standard Time (MST), which is GMT-7. Figuring out what time Arizona can be remembered by a simple mnemonic:
Those in Second Life may have noticed that "Second Life time" (SL time) shifted from PST to PDT. That is because their servers reside in San Francisco, California.
The blogosphere has quieted down a bit over the two papers on MTBF estimates for Disk Drive Modules (DDM).One article on SearchStorage.com by Arun Taneja asksIs RAID passé? Disk capacity is growing at a faster rate than DDM reliability. During the hours to rebuild a DDM, companies are at risk of additional failures that could require recovery from a copy, or result in data loss, depending on how well your Business Continuity (BC) plan is written and followed.
I'll discuss two comments in particular.
Both are fair comments. Disk arrays do run microcode to assist or perform the RAID function, detect failures and start the rebuild process, and so clever designs to support spare disks, process the rebuild quickly, and so on, can differentiate one vendor's offering from another.
On the issue of what does IBM provide to help its clients make the right decisions for their environments, Jon William Toigo at DrunkenData points his readers to IBM's Business Continuity Self-Assessment tool. In normal data center conditions, DDMs will fail, and a Business Continuity plan shouldbe written and developed to handle this fact. Using 2-site and 3-site mirroring, complemented with versions of tape backups, can help address some of these concerns and mitigate some of the risks involved with using disk systems.
For those who want a more technical answer, IBM has just published a series of IBM Redbooks.
Back in 1986, when I first started with IBM, my first job was working on a software product called Data Facility Hierarchical Storage Manager (DFHSM). This did "Information Lifecycle Management" (ILM) by moving data sets from one storage tier to another. (The phrase "Information Lifecycle Management" was coined by StorageTek in 1991, and later resurrected by EMC a few years ago. As is often typical, things that appear new to the distributed systems crowd, are often well-established concepts in the mainframe arena).
To help explain DFHSM and its sister product Data Facility Data Set Services (DFDSS), an enterprising sales rep in Los Angeles named C.D. Larsen made a video called "Re-arranging the sock drawer". He explained that sometimes you want the socks you wear the most on the top drawer, and socks that you only wear now and again in lower drawers. DFHSM can re-arrange your sock drawer based on policy-based automation, determining which ones you wear most often, and moving the others down the "hierarchy" accordingly.
To explain DFDSS, he pulled out an entire drawer of socks, and move it to another level. DFDSS was able to do volume-level backups and dumps to tape very quickly, since it did not process individual data sets, but rather the entire volume image as a whole. These two products are now DFSMShsm and DFSMSdss components of the DFSMS element of the z/OS operating system.
Mainframes use an interesting naming convention for its data sets. 44 characters, divided up into qualifiers that are 1-8 characters long, separated by periods. For exam On Linux, UNIX and Windows, most people are more familiar with hierarchical file systems, so the same file might be stored as Same concept. You set up a taxonomy of they way you want to organize your data, so that related data can be grouped together and easier to manage. Whereas we used to tell customers that "Qualifiers are your friend", we now tell people "sub-directories are your friend". This is true when organizing the files on your laptop, in your Lotus Notes, and in Second Life. Since starting Second Life last November, I have picked up all kinds of free things along the way, and now have thousands of objects in my "inventory". Basically, its like keeping things in your pocket, when you want it, you just take it out of your pocket, and *poof* it appears magically on the ground. I was having a hard time finding things in my inventory, so I decided to re-arrange with sub-folders. This is done in-world, and I found it best to do this away from other avatars asking "what are you doing?" which can get quite annoying. Find a remote island or the rooftop of some building when doing "house cleaning". I've arranged my main folders as follows. These all appear on a single screen, and makes it easy to find exactly what I am looking for. In Second Life, you can make complete "outfits" which include your body shape, skin, eyes, hair, and clothes. However, saving away many outfits means duplicating a lot of items. Therefore, I separated them out. I keep body shape, skin, eyes and hair in the folder "Body Parts" and all of the clothing items under "Clothing". Under clothing, I separated everything out into the major categories: I could have a separate folder for "socks", but I keep those in the "shoes" folder.
On Linux, UNIX and Windows, most people are more familiar with hierarchical file systems, so the same file might be stored as Same concept. You set up a taxonomy of they way you want to organize your data, so that related data can be grouped together and easier to manage. Whereas we used to tell customers that "Qualifiers are your friend", we now tell people "sub-directories are your friend". This is true when organizing the files on your laptop, in your Lotus Notes, and in Second Life. Since starting Second Life last November, I have picked up all kinds of free things along the way, and now have thousands of objects in my "inventory". Basically, its like keeping things in your pocket, when you want it, you just take it out of your pocket, and *poof* it appears magically on the ground. I was having a hard time finding things in my inventory, so I decided to re-arrange with sub-folders. This is done in-world, and I found it best to do this away from other avatars asking "what are you doing?" which can get quite annoying. Find a remote island or the rooftop of some building when doing "house cleaning". I've arranged my main folders as follows. These all appear on a single screen, and makes it easy to find exactly what I am looking for. In Second Life, you can make complete "outfits" which include your body shape, skin, eyes, hair, and clothes. However, saving away many outfits means duplicating a lot of items. Therefore, I separated them out. I keep body shape, skin, eyes and hair in the folder "Body Parts" and all of the clothing items under "Clothing". Under clothing, I separated everything out into the major categories: I could have a separate folder for "socks", but I keep those in the "shoes" folder.
Same concept. You set up a taxonomy of they way you want to organize your data, so that related data can be grouped together and easier to manage. Whereas we used to tell customers that "Qualifiers are your friend", we now tell people "sub-directories are your friend". This is true when organizing the files on your laptop, in your Lotus Notes, and in Second Life.
Since starting Second Life last November, I have picked up all kinds of free things along the way, and now have thousands of objects in my "inventory". Basically, its like keeping things in your pocket, when you want it, you just take it out of your pocket, and *poof* it appears magically on the ground. I was having a hard time finding things in my inventory, so I decided to re-arrange with sub-folders. This is done in-world, and I found it best to do this away from other avatars asking "what are you doing?" which can get quite annoying. Find a remote island or the rooftop of some building when doing "house cleaning".
I've arranged my main folders as follows. These all appear on a single screen, and makes it easy to find exactly what I am looking for.
In Second Life, you can make complete "outfits" which include your body shape, skin, eyes, hair, and clothes. However, saving away many outfits means duplicating a lot of items. Therefore, I separated them out. I keep body shape, skin, eyes and hair in the folder "Body Parts" and all of the clothing items under "Clothing". Under clothing, I separated everything out into the major categories:
I could have a separate folder for "socks", but I keep those in the "shoes" folder.
Well, I'm back from Mexico.
The flight back was uneventful, except for the leg from Houston to Tucson. The lady in the window seat had "overallocated storage" and required a "distance extension" on her safety belt. To accomodate her, her husband and I flipped up the "logical partitions" between the seats, and "compressed" to take up less space to accomodate. Luckily, it was only for two hours.
On the flight to Houston, I was asked what kind of drink I wanted, in Spanish, as the crew were all from Mexico. Here's a quick Spanish lesson:
Before IBM got into an OEM agreement with Network Appliance, I used to indicate that EMC and NetApp were the "Coke and Pepsi" of the NAS marketplace. IBM had a presence, but it was in the single digits, whereas these two major players had roughly equal marketshare, just as Coke and Pepsi dominate equally the US marketplace. That analogy doesn't work in other countries, as in some cases the country might be more heavily in favor of one or the other.
On my flight over from Houston to Tucson, however, I was asked what kind of "pop" I wanted. I always say "soda" to refer generically to soft drinks, but realize that others say "pop" instead. Not only can Americans be able to detect what part of the country people are from by accent, but also by the words they use.
Now I see a blog that explores in great detail the issue of Pop vs Soda vs Coke.
So, it looks like I'll need to "retire" my Coke vs. Pepsi analogy, not because their marketshare has changed, but because IBM's parntering with NetApp greatly skews the advantage over EMC.
Today, I went looking for reading-glasses. Unfamiliar with my surroundings, I asked several people where I might be able to find and purchase these, and was sent in various directions. My first stop was a bookstore. It would make sense that since many people need reading glasses to read the books, that they would sell them there, but no. The staff didn't know where I could go, but pointed me in the direction of a mall. At the mall, I found a pharmacy. Many pharmacies sell reading glasses, so I stopped in, but no, not this one. The pharmacists suggested the super-store nearby. I walked in to the super-store, and asked the first employee where they keep their reading glasses, and they said the other corner. The other corner was the electronics department. It made sense that they sold CDs and DVDs in the same section as the equipment that plays them, but reading glasses? Skeptical, I went to the pharmacy department, and the young and beautiful lady (everyone is young, thin and beautiful here) had me follow her, and she led me back to the electronics department, whereupon she pointed to a rack of sunglasses. I indicated that I need reading glasses, not sunglasses. She pulled one out, and it was indeed reading glasses, 1.25, just what I was looking for. Others were tinted, so you can read the newspaper out in the sunlight. The pair I chose cost only $97 in the local currency.
After reading the last sentence, you might be thinking I am describing my "avatar" in Second Life, but no, I am talking about my search for reading glasses on the streets of Mexico. I am here this week in meetings with IBM Business Partners and sales reps to discuss IBM's latest System Storage products and offerings.
We used to tell people they should "clothe" servers with storage. IBM offers both, so yes it makes sense to offer both as part of a complete solution. However, when you look through a dictionary definition "to clothe" you learn it is to dress, wrap or cover with clothing, an implication that it is external, and perhaps temporary, easily changed, like switching from sunglasses to reading glasses. In Second Life, objects can be "worn", simply by attaching or detaching them to your "avatar". Sometimes clothing serves a purpose, like reading glasses, provides protection, like raincoats, and other times, more decorative, like"icing on the cake" or "gold plating".
This concept was fine 50 years ago, when we were in a server-centric world, and dumb storage devices were attached to very intelligent servers. Back then, we used the derogatory term "subsystems" to emphasize that storage was just part of the server, not a system of its own.
Today, we live in an information-centric world. The information outlives the media, and the media outlives the servers that access it. It is not unreasonable to attach dozens or hundreds of servers to a single storage system, or collection of storage systems. Over 20 percent of IBM System Storage DS8000 series, for example, are attached to Windows rack-optimized or blade servers. Imagine a refrigerator surrounded by dozens or hundreds of pizza boxes. Storage is no longer a subsystem, but a system on its own right, dressed, wrapped or covered by servers that deliver the right information, to the right people, at the right time.
So perhaps we should reverse it, telling people they should "clothe" their storage with servers!
I didn't really have a theme this week, still recovering from jet-lag from my travels through Japan, Australia, China.
Gary Diskman has an amusing blog entry about a Funny disaster recovery job posting. It is not clear if he is being completely tongue-in-cheek, or a bit cynical. However, it rings true that you get what you measure, and some managers look for easy metrics, even if there are unintended consequences.
Western medicine works this way. Rather than paying your doctor to keep you healthy, you pay him per visit, to get refills on prescriptions, check-ups on medical conditions, surgeries and so on. While Eastern medicine is focused on keeping people healthy, Western medicine profits more from resolving "situations".
I have seen similar situations on the "health" of the data center. In one case, the admins were measured on how quickly they bring back up their web-servers after a crash. They had this process down to a science, because they were measured on how quickly they resolved the situation. I suggested switching from Windows to Linux, a much more reliable operating system for web-serving, and showed examples of web-servers running Linux that have been up for 1000 days or more. Management changed the metrics to "average up-time in days" and magically the re-boots all but disappeared, thanks to Linux, but also thanks in part to shifting the incentive structure. Perhaps some of those earlier situations were "artificially created"?
Back in the 1980s, I was working on a small software project that was about 5000 lines of code. In those days, testers were measured by the number of "successful" testcases that ran without incident. Testcases that uncovered an error were labeled as "failures" to be re-run after the developers fixed the code. When I declared my code ready for test, the test team ran 110 testcases, all successfully, and they were all rewarded for meeting their schedule. I, on the other hand, did not accept these results, met with them and told them I would give them $100 each if they could find a bug in my code in the next week. Nobody writes 5000 lines of code without some error along the way, not even me. (As one author put it, more people have left earth's gravity to orbit the planet than have written perfect code that did not require subsequent review or testing. It's so true. Good software is difficult to write.)
The test team accepted the challenge, and found 6 problems, more than I expected, but at least I felt more confident of the code quality after fixing these. As I suspected, the unintended consequence of counting "successful" testcases was that testers would write the most simple, basic, leas So, my advice is to determine metrics that have the intended consequences you want, while avoiding any negative unintented consequences that might undermine your eventual success. People will quickly figure out how to maximize the results, and if you can align their goals to company goals, then everybody benefits. Well, I'll be blogging from Mexico next week (yes, it is a business trip!). Enjoy the weekend.
So, my advice is to determine metrics that have the intended consequences you want, while avoiding any negative unintented consequences that might undermine your eventual success. People will quickly figure out how to maximize the results, and if you can align their goals to company goals, then everybody benefits.
Well, I'll be blogging from Mexico next week (yes, it is a business trip!). Enjoy the weekend.
In case you haven't noticed, IBM System Storage makes most of their announcements on Tuesdays. IBM announced a lot today, so here is a quick run-down.
IBM continues its market leadership with these new set of features and offerings!
I am back from China, and now glad to be back in the old USA. Last week, someone asked me what would it take to add a specific feature to the IBM System Storage DS8300. The what-would-it-take question is well-known among development circles informally as a "sizing" effort, or more formally as "Development Expense" estimate.
For software engineering projects, the process was simply that an architect would estimate the number of "Lines of Code" (LOC) typically represented in thousands of lines of code (KLOC). This single number would convert to another single number, "person-months", which would then translate to another single number "dollars". Once you had KLOC, the rest followed directly from a formula, average or rule-of-thumb.
More amazing is that this single number could then determine a variety of other numbers, the number of total months for the schedule, the number of developers, testers, publication writers and quality assurance team members needed, and so on. Again, these were developed using a formula, developed and based on past experience of similar projects.
Earlier in my career, I was the lead architect for DFSMS for the z/OS operating system, and later for IBM TotalStorage Productivity Center, performing these sizing efforts. A famous IBM architect, Frederick P. Brooks, wrote a now-classic book that was requiredreading when I started at IBM, which just was re-released as Mythical Man-Month: Essays in Software Engineering, 20th Anniversary Edition. In addition to sound advice, he alsooffered a formula or two that helps with these estimating tasks.
Hardware design introduces a different set of challenges. When I was getting my Masters Degree in Electrical Engineering, it took myself and four other grad students a full semester just to design a six-layer, 900 transistor silicon chip, which could only perform a single function, multiply two numbers together.At IBM, another book that I was given to read was Soul of a New Machine, documenting six hardware engineers, and six software engineers, working long hours on a tight schedule to produce a new computer for Data General.
So why do I bring this up now? IBM architects William Goddard and John Lynott are being inducted posthumously this year into the prestigious National Inventors Hall of Fame for their disk system innovation.
Under the leadership of Reynold Johnson, the team developed an air-bearing head to “float” above the disk without crashing into the disk. Imagine a fighter airplane flying full speed across the country-side at 50 feet off the ground. If you every heard the term "my disk crashed", it was originally referring to the read/write head touching the disk surface, causing terrible damage.
A uniformly flat disk surface was created by spinning the coating onto the rapidly rotating disk, leaving many wearing lab coats covered with disk liquid at waist level. Developing disk-to-disk and track-to-track access mechanisms proved more challenging, and nearly halted the project. The team, however, was adamant that this problem could be solved, and customers were increasingly asking for random access technology. The result was the "350 Disk Storage Unit" designed for the "305 RAMAC computer", which I have talked about a lot last year as part of our "50 years of disk systems innovation" celebration.
Neither Goddard nor Lynott had computing experience prior to joining IBM. Goddard was a former science teacher who briefly worked in aerospace. Lynott had been a mechanic in the Navy and later a mechanical engineer. They didn't have a nice formula based on past experience, they didn't have the benefit of Fred Brooks' advice, or the rules-of-thumb or averages now used to estimate the size of projects. They had to break new ground.
Now that's innovation!
technorati tags: IBM, DS8300, disk, KLOC, sizing, estimate, DFSMS, z/OS, TotalStorage Productivity Center, Frederick Brooks, William Goddard, John Lynott, Mythical Man-Month, Reynold Johnson, RAMAC, 305, 350,[Read More]
It's official! IBM System Storage TS1120 tape drive takes home the gold award, the product of the year, announced by Storage magazine.
I spent 18 hours traveling from Australia to China yesterday, and we were partially delayed due to weather, but felt that it was necessary to discuss the innovative use of encryption on this drive.
While most consider the TS1120 an "Enterprise-class" tape technology for the mainframe, it is also attachable to the smallest distributed systems running Windows, Linux, or various flavors of UNIX. Rather than limit users with an Encryption Key Manager that only ran on z/OS, IBM instead chose to implement it in Java, that can be run on anything from z/OS to Linux, Unix and Windows platforms, giving clients choice and flexibility in their deployment.
The design is quite clever and elegant. In the encryption world, there are two ways to encrypt.
So, let's say that Green, Inc. wants to send a tape to Blue, Co. Blue has already provided its public "encryption" key to Green, so Green does the following:
If the super-secret private key is ever compromised, all you have to do is mount the tape, unlock the red key with the old private key, and re-lock the red key with a new public key. Since the red key doesn't change, the rest of the data can be left in tact. The whole process takes less than 5 minutes, compared to Sun Microsystems method, which could take 1-2 hours per cartridge, having to decrypt and re-encrypt the entire data stream.Read More]
Well, I have left Japan, and while everyone else is enjoying the Super Bowl, I am now in Australia, at another conference.Today I had the pleasure to hear filmmakers talk about their successes, and how IBM helps the movie industry.
I will wrap up this week's theme on travel, conferences and Japan discussingGroundhog day, celebratedtoday (Feb. 2) in the US.
I thought of this because there was a 2003 movie called"Lost in Translation", the title of yesterday's post. This movie is about an American actor, played by Bill Murray, coming to Tokyoto film a whisky commercial. I first saw it with my sister and father, and we musthave been the only three who have actually been to Japan, as we were laughing hysterically,while the rest of the audience was utterly confused. If you have never been to Japan, see the movie before you go, then see it again after you get back home.
Ten years earlier, Bill Murray also played the lead role in another movie called"Groundhog day".In the movie, Bill Murray's character is TV newsman "Phil Connors" who travels to a small townwhere they bring out a small groundhog. If the groundhog can see his shadow, it predictsat least six more weeks of winter. If it does not, winter will end sooner. The nextday, Phil wakes up to realize that he is re-living the same day, over and over, like a modern-day Sisyphus or Promethius. Howhe handles himself in this situation, is what makes the movie so memorable.
When I explain what I do for IBM, to people I meet at home and abroad, I get asked the same set of questions.
Continuing my week's theme on travel, conferences, and Japan, I will discuss translation and interpretation.
By now, you realize that I speak some Japanese, but not enough to give a full presentation. In addition to English, I can present Spanish and Brazilian Portuguese, but am not yet comfortable doing a full hour talk in Japanese, especially when technical terminology is required.
This brings us to the differences between translation and interpretation. The former is more literal, but the latter is needed to get the spirit or essence of what is being communicated. Sometimes, the differences in languages and culture need to be taken into account to get the right meaning across.
Continuing my week's theme on travel, conferences, and Japan, I provide three more"survival words" in Japanese language. These might seem like an odd trio, but they comein very handy.
This week I am in Japan, so my week's theme will center around travel, speaking at conferences, and Japan itself. I first travelled to Japan in the late 1980s, to visit a college friend who was working for Ford Motor Company, on assignment in Japan as liasion to Mazda Corp.
Back then, the only Japanese phrase I knew was "Wakarimashta" which means "I know" or "I understand". If you only know one phrase in a foreign language, this possibly could be the worst to know.
My second trip, I was better prepared. I learned three "survival phrases":
sumimasen - "I'm sorry/excuse me"
These are great phrases to know individually, but even more powerful strung all together, to emphasize that you will begin speaking English, but at least with good reason (and perhaps a bit of irony.)
I've been to Japan many times since, and have picked up more of the language. When travelling to Japan, or anywhere for that matter, it is important to "pack light". I'll be gone for two weeks, but all I bring is a laptop bag and one carry-on piece of luggage.
I went on a trip to Prague (Czech Republic) with a female co-worker who brought FOUR pieces of luggage. One was just for shoes. Another piece was just for hair styling gel, make-up, face creams and finger nail polish. Today, the rules are different, and the TSA allows only a single quart-size plastic bag containing little jars of 3 ounces or less of liquids or gels. I didn't have any "quart-size" bags, so I used a smaller sandwich-size bag.
What does all this have to do with storage? I've helped many clients move data centers, and this involves moving their servers, their networks, and their storage. Servers and Networks are easy to move, but storage presents some challenges. In many cases, the entire company is shut down, the storage is moved, and then the company is operational again. Needless to say, it is best to do this over a weekend.
I tell clients to "pack light" and figure out what data they really need in the move. What do you really need to operate your business? Bring just that, the rest can arrive later.
This same concept applies for Business Continuity and Disaster Recovery planning. What do you really need after a disaster occurs? Can you run your business for a few weeks on that data, until the rest of the data is restored? If you can't run your entire business on that data, can you run your most important parts of your business?
If you run a bank, perhaps keeping your ATM cash machines running is more important than making out new loans. In Japan, if a bank has any outages that impact their ATM machines, they put out a full page advertisement in the local papers to apologize for the inconvenience.
Business Continuity is one of the nine "Infrastructure Solutions" that IBM can help clients with. If you are interested in learning more on how IBM can help you with your Business Continuity, click here.
Stephen Colbert, of The Colbert Report, explains the name changes in recent mergers of the Telecommunications industry. A discussion on "changing names" and how that impacts storage seems like a good way to wrap up the week's theme on naming conventions.
Name changes are sometimes painful, but often times done for a purpose, such as to promote a family. In the US, when a man and woman marries, the woman often changes her family name to match her husband, and the kids all adopt the father's family name. I say "often" because there are times where the woman keeps her name, or adds to it in a hyphenated way. ABC News reported that a Man Fights to Take Wife's Name in Marriage. KipEsquire, a lawyer, writes about it in his blogA stitch in haste.
IT industry changes the names of products that people knew as something else. Other times, they re-use an existing name, when really it is or should be different from the original. Last year, I took on the job of helping transition from our brand "TotalStorage" to the "System Storage" product line under the new "IBM Systems" brand. I help decide what stays the same name or what changes, when it should change, and how to announce that change.
On the disk side, IBM renamed Fibre Array Storage Technology, or FAStT, which was pronounced exactly like "fast", to DS4000 series. This was a big improvement, as people couldn't seem to spell it properly, with variations like "FastT". Nor could people pronounce it properly, saying "fast-tee" instead. The advantage of "DS" is that it is both easy to spell, and easy to pronounce. The DS4000 series continues to be "fast", providing excellent performance for its midrange price category.
IBM's Enterprise Storage Server (ESS) line went from model E10, to F20, to 750 and 800. When IBM came out with its replacement, the IBM TotalStorage DS8000, some people asked why it wasn't named the ESS 900, for example. The DS8000 is quite different internally, new hardware design and implementation, but is highly compatible with the ESS line, and shares much of the same functionality from microcode. Last year, it was replaced by the IBM System Storage DS8000 Turbo. Again, newer hardware, so it was easy to justify the new name change from "TotalStorage" to "System Storage".
Renaming a product risks losing its certifications and awards. For example, IBM spent a lot of time and money getting the OS/390 operating system certified as a "UNIX" platform. When it was renamed to z/OS, IBM had to do it all over again. Learning from this experience, IBM decided not to rename the SAN Volume Controllerto a new designation like "DS5750", as it enjoys the "number one" spot on both the SPC-1 and SPC-2 performance benchmarks, and is recognized as the leader in the disk storage virtualization marketplace. Renaming this product would mean losing that collateral.
IBM's "other disk systems" the N series posed another set of challenges. The current DS line already has entry-level (DS3000), midrange (DS4000) and enterprise-class (DS6000 and DS8000) products. The OEM agreement that IBM has with Network Appliance (NetApp) resulted in a new set of entry-level, midrange, and enterprise-class products. But these didn't fit nicely into the DS3000-to-DS8000 continuum. Instead, IBM decided to go with N series, using N3000 for entry-level, N5000 for midrange, and N7000 for enterprise-class. These are different than the numbers used by NetApp for their comparable, but not identical, offerings.
On the tape side, IBM decided to name the tape drives TS1000 and TS2000 range, tape libraries and automation with a TS3000 range, and tape virtualization to the TS7000 range. A lot of tape products already had 3000 numbering that had to change to fit this new scheme. This is why IBM's popular 3592 tape drive was renamed to the TS1120. The replacement to the 3494 Virtual Tape Server was named TS7700 Virtualization Engine.
Obviously, you can't change the names of products that are currently in the field, but what about existing software with minor updates? IBM decided to leave "TotalStorage Produtivity Center" under the "TotalStorage" brand until it has a significant version upgrade. Many people say "TPC" as a convenient acronym when referring to this product, but TPC is a registered trademark of the Professional Golfers Association (PGA) to refer to its "Tournament Players Club".
How can anyone confuse "managing storage" with "playing golf"? One activity is full of frustration that takes years or decades to master, involving the need to understand a variety of equipment and techniques to use each properly to accomplish your goals; and the other is an enjoyable activity, immediately productive in front of a single pane of glass managing all of your DAS, SAN and NAS storage, from reporting on your files and databases to managing storage networks and tape libraries.
Enjoy the weekend!
technorati tags: Stephen Colbert, Colbert Report, Telecommunications industry, KipEsquire, IBM, FAStT, DS4000, DS3000, DS8000, OS/390, UNIX, z/OS, SAN Volume Controller, N series, TS1120, TS7700, TotalStorage Productivity Center, TPC, PGA, Golf[Read More]
Shakespeare wrote "What's in a name? That which we call a rose by any other word would smell as sweet." This week my theme will be on names, naming convention, and how we access information on storage.
Take for example these two sentences:
The Bears beat New Orleans.
Though they appear very different, football fans who might have watched either or both of the two conference title games yesterday would quickly recognize that they refer to the same two teams and the same end-result.
I'll be traveling to Asia next week. While most people call me "Tony", my legal given name is "Anthony" which is what appears on my passport and other legal documents. Most English-speaking countries handle this fine, but it can be confusing in Japan or China, where "A. Pearson" doesn't match "T. Pearson".
In the US, our given and family names are referred to as our "first name" and our "last name", relating to their positional sequence. In Asia, family names come first, followed by their given names last. To help avoid confusion, we have started adopting the practice of putting the family name in ALL CAPITAL LETTERS, so I would "Tony PEARSON" while my colleague may be "WONG Francis".
In Japanese, "Mr. JONES" would be "Jones-san". However, Pearson-san is such a toungue-twister, that most just say "Tony-san" which is fine with me. I have been called "Mr. Tony" in a variety of countries, perfectly acceptable.
You can call me anything you like, just don't call me late for dinner.
Today, in the US, is Martin Luther King day. There is a good post about this by Seth Godin.Dr. King had a vision for the future, and is most remembered by his speech that began: "I have a dream..."
IBM also has a vision for the future, and like Martin Luther King's speech, is startingto enable change. Last February 2006, IBM launched "Information on Demand", a visionthat involves bringing together our hardware, software, and services.
The impact has not gone unnoticed. Barron's featured IBM in an article titled "The New IBM".
I suspect bloggers helped get the word out. Here's a graph fromYahoo! Financeshowing the IBM stock price over the pastsix months. This blog started in September, when stock was in the low 80's, and now it is in thehigh 90's. I can't take all the credit, of course, as there are now over 3000 IBMers blogging, either inside thecompany, or externally to the rest of the world.
And the future continues to look bright.Greg over at IBMeye feels thatIBM stock poised for anotherstrong year.
If the analysts are right, 2007 is going to be a good year!
Continuing on my theme of storage area networking, today I thought I would coverstorage networking at home.
Before the PC, corporate end-users had dumb terminals (displays) connected to mainframes (servers) thatwere then connected to external disk and tape (storage devices). This was all done with direct cable connections,then later through networks. The PC solved this by putting the display, server and storage into one unit, makingit more accessible to smaller businesses and individuals.
Many years ago, Microsoft started out with the vision "A PC on every desktop".The primary reason we even have networks is while everyone might have had their own PC, not everyone had their own printer. (Printers used to be part of IBM's storage division, which we explained as "storage on PAPER"!)Maybe if Microsoft's vision was "A PC and printer on every desktop", history might have turned up different.
Let's take a look at Apple's latest offerings shown at MacWorld 2007 in San Francisco, as well as how rivals battle for connected world at the Consumer Electronics Show (CES) 2007 in Las Vegas.Blogger Wax Banks argues that these announcements mean"the era of the personal computer is coming to an end".
Disclaimer: IBM has close business relationships with both Apple and Microsoft and others,providing the chips inside some of their products. I discuss them here not only becauseI am trying to get you to buy their products, and let IBM benefit indirectly from their success, but because they are newsworthy, and relevant to the topic at hand.
I already access photos and audio with my Tivo, from both my Mac AND my PC,so not much new here for me. Getting my home network connected was one of mytech highlights of 2006 and organizing my audio content was done withILM for my iPod.
Bypassing the PC, by being able to have your television, handheld or phone access data directly will greatlyincrease the demand for storage from businesses that provide information and content, and for storage networking technology in the home. It will be interesting how this all plays out in 2007.Read More]
Continuing this week's theme on Storage Area Networks, today I thought I would talkabout the various terms we use for our equipment.
One area of confusion are the adjectives "entry-level", "midrange" and "ent If you are asking yourself "which size is right for my company?" or "is my company big enoughfor a director?" you are asking the wrong questions! Instead, determine a SAN configurationthat meets your workload, and then decide the components for that design. McData coined a phrase called "core/edge" design that is considered today as "Best Practice" throughout the industry.A good write-up can be found here at SearchStorage.com. Basically, you put your big beefy "core" directors in the center of the room, and then surround it with midrange switches, that then these connect to "edge" switches, that then connect to the servers and storage near them. As you grow, this design can easilyscale to grow with you. So, if you need help implementing a SAN for the first time, or upgrading the one you have,call IBM, we can help!
If you are asking yourself "which size is right for my company?" or "is my company big enoughfor a director?" you are asking the wrong questions! Instead, determine a SAN configurationthat meets your workload, and then decide the components for that design.
McData coined a phrase called "core/edge" design that is considered today as "Best Practice" throughout the industry.A good write-up can be found here at SearchStorage.com. Basically, you put your big beefy "core" directors in the center of the room, and then surround it with midrange switches, that then these connect to "edge" switches, that then connect to the servers and storage near them. As you grow, this design can easilyscale to grow with you.
So, if you need help implementing a SAN for the first time, or upgrading the one you have,call IBM, we can help!Read More]
Last week, Paul Weinberg of eChannelLine.com asks Is this the year of the SAN (again)?So, I thought this week I would cover my thoughts and opinions on storage networking. We oftenfocus on servers or storage devices, and forget that the network in between is an entire worldon itself.
I believe Mr. Weinberg is basing this on the idea that in 2007, over 50 percent of disk will beattached over SAN, edging out the alternative: Direct Attached Storage (DAS). But perhaps 50 percentis the wrong number to focus on. In 2007, The United Nations estimates thatcities will surpass rural areas, with just over 50 percent of theworld's population. Does that make this the "Year of the City"? Of course not.
Instead, I prefer to use the methodology that Malcolm Gladwell uses in his book, The Tipping Point.(I have read this book and highly recommend it!)Gladwell indicates that the tipping point happens at the start of the epidemic, not when it is half over.Isn't it better to celebrate the sweet 16 debutante ball when young ladies have completed their years of training and preparation, and are ready to be introduced to the rest of the world, rather than after they are thirty-something, married with children.
Let's explore some of the history. Stuart Kendric has a nice 7-page summary on theHistory & Plumbing of SANs.
IBM announced the first SAN technology calledEnterprise Systems Connection (ESCON) way back in September 1990. This allowed multiplemainframe servers to connect to multiple storage systems over equipment called "ESCON Directors" that directedtraffic from point A to point B. Before this, mainframes sent "ChannelCommand Words" or CCWs, across parallel "bus and tag" copper cables. ESCON was serial overfiber optic wiring. SANs solved two problems: first, it reduced the "rat's nest" of cables between many serversand many storage systems, and second, it extended the distance between server and storage device.
For distributed systems running UNIX or Windows, the CCW-equivalent over parallel cables was called Small ComputerSystem Interface (SCSI). The SCSI command had over 1000 command words, so for its Advanced Technology (AT) personal computers (PC AT), IBM introduced a subset of SCSI commands called ATA (Advanced Technology Attachment). ATA drives supportedfewer commands, ran at slower speeds, and were manufactured with a less rigorous process. Today ATA drives are about 55 percent the cost per MB as comparable SCSI drives.
Anyone who has ever opened their PC and found flat ribbon cable with eight or sixteen wires in parallel, can understand that the same issues applied externally. Parallel technologies arelimited to distance and speed, as all the bits have to arrive at the end of the wire at approximately thesame time. Direct attach schemes with every server attaches directly to every storage device were also problematic.Imagine 100 servers connected to 100 storage devices, that would be 10,000 wires!
So, a new technology standard was developed, called Fibre Channel, ratified in 1994.The spelling of "Fibre" was intentionally made different than "Fiber" on purpose. "Fibre" is a protocol thatcan travel over copper or glass wires. "Fiber" represents the glass wiring itself.
Fibre Channel is amazingly versatile. For today's Linux, UNIX and Windows servers, it can carry SCSI commands, and the combination of SCSI over FC is called Fibre Channel Protocol (FCP). For the mainframe servers, it can carry CCW commands. Running CCW over Fibre Channel is called FICON. This convergence allows mainframes and distributed systems to share a common Fibre Channel network, using the same set of switches and directors.
We saw the use of SANs explode in the marketplace over the past 10 years, and then cool down with a series of mergers and acquisitions. Last year, Brocade announced it was acquiring rival McData, so we will be down to two major players, Cisco and Brocade.
So, IMHO, I think we are well past the "Year of the SAN".
Continuing this week's theme of New Year's Resolutions for the data center, today we'll talk about one that people don't always think about on a personal level, that is to hone your tools and skills.
A long time ago, I used to be a regular speaker at the SHARE user group conference. One of the most attended sessions was Sam Golob presenting the latest CBT Tape set of tools. Over time, this large collection of "mainframe shareware" was handed out on 3480 tape cartridges, then on CDs, and finally made downloadable off the web.Sam's main point, which I remember to this day, was that everyone who has a job should figure out what tools they use, keep those tools functioning properly, and learn to use them well.
Later, I took some cooking classes at a culinary school. Among other things, we learned:
This last point hits close to home, as many people like me have too many tools that they do not use often enough to know how to use them well. Do I really need my strawberry corer, garlic press, or a tray designed for the storage and delivery of deviled eggs?
The same could be said about software tools. What tools do you use in your job? Do you feel you know how to take full advantage of their power and capabilities?If you develop software, do you know all the features for your debugging tools? If you develop advertising or marketing materials, do you know all the features of your photo or video editing software? If you manage storage in a data center, do you know all the tools for managing your storage area network (SAN), disk systems, tape libraries, and reporting tools to identify all of your files and databases across your entire IT environment?I would not be surprised if you could replace a whole mess of tools with just one, such as the IBM TotalStorage Productivity Center.Read More]
Wrapping up this week's theme of New Year's Resolutions for the data center, the New York Times argues we should go easy on the resolutions, so I'll conclude with reducing stress. Lighten up! Relax, and try not to take your job so seriously.
(I know you're probably thinking, "That's easy for you to say, Mr. paid
technorati tags: New Years, resolutions, reducing stress, laughter, Tucson Laughter Club, Laughter Yoga, Sun, StorageTek, Kodak, Work/Life Balance, sleep, blogfights, assertive, music, LifeHacker, Live365, Pink Noise[Read More]
Happy New Year!
This year I resolve to be more consistent in my blogging, and my goal is to give you one to five entries per week, every week, based on the advice from Glenn Wolsey, Jennette Banks, and others.On some weeks, I will have a running theme, so rather than super-long entries to cover everything I can think of on a topic, make the entries short and readable. This week is a good time to review last year's "New Year's Resolutions" and to make new ones for 2007. I will discuss actions that companies can adopt for their data centers.
A common resolution is to lose weight, as in this Dilbert comic. Last year, I resolved to lose weight in 2006, and am delighted with myself that I lost eight pounds. When people ask for the secret of my success, I whisper in their ear "Eat less, exercise more." In general, people (and companies) know what to do, but just don't do it, which Pfeffer and Sutton document in their book The Knowing-Doing Gap. In my case, it involved lifestyle change: I exercised at a gym three times per week in Tucson, with a personal trainer, and revamped my diet.
Not everyone subscribes to the "eat less exercise more" philosophy. For example, Ric Watson argues in his blog that you can eat fewer calories, but eat more in actual volume, by choosing the right foods. This brings up the issues of "metrics" that most data centers are familiar with. Last year, I read the book "You: On a Diet" which explains that it is better to focus on "waist reduction" as measured in inches around your mid-section at the belly button, than "weight reduction" as measured in pounds. This year, I resolve to get down to 35 inches by the end of 2007.
The problem with measuring "weight" is that you are weighing bones, muscle and fat. A person can gain ten pounds of muscle, lose ten pounds of fat, and the scale would indicate no progress. The same problem occurs in data centers. How many TB of data do you have? Storage admins can easily tell you, but can they tell how much of this is bone (data needed for operating infrastructure), muscle (data used in daily operations that generates revenue) or fat (obsolete or orphaned data)?
We at IBM often state that "Information Lifecycle Management (ILM)" is more lifestyle change than a "fad diet". Figuring out what data you should capture in the first place, where to place it, when to move it, and when to get rid of it, is more important that just buying different tiers of storage hardware. So, for those looking to make new data center resolutions, I suggest the following actions:
Continuing this week's theme of recap for 2006, I thought it would be good to look back at the various videos made available on the internet.
In his blog, Paul Gillin agrees with Time Magazine's Person of the Year choice of "all of us", those of us who use the World Wide Web to do business or have fun, and to those who contribute to the internet by creating content, such as people who blog or create websites.
So, in continuing my theme this week to recap the best and worst of last year, I list my personal "tech highlights" of 2006.
I am sure there are other triumphs I had throughout the year, but these are the first the come to mind.
'Those who cannot remember the past are condemned to repeat it.'
This last week of 2006 seems like a good time to recap the past year, and review the upcoming new year.That said, a good start is PC World's Top 21 Tech Screwups of 2006.
I got an interesting email from a new blogger asking me for advice on how frequently to post entries.I am probably not the right person to ask, as I blog whenever a thought comes to mind that I think otherswould enjoy reading, and sometimes that means several times a day, and other times only a few per month.I actually have a day job, busy doing other things, and blogging is just now part of my general set of activities.My focus is quality not quantity.
With that in mind, I was delightfully surprised that this blog was ranked among theTop 10 Storage Blogs by Network World, which explains my recent spike in traffic.
I shared the news with my 72-year-old father, and he exclaimed "There are actually 10 or more blogsto cover the IT storage industry?" He couldn't understand why the world would read more than two or three. I personally track thirty-five of them, and I suspect there are hundredsothers out there. Of these, some blog quite regularly, while others do not, so I am in good company. Deni Connor, the author who selected these top 10, gave a nice general complement tothe entire list of blogs:
The blogs written by storage company executives can be surprisingly vendor-agnostic, though the analysts and consultants still tend to pull fewer punches.
And this was my goal as well, to enlighten and entertain, in a fair and balanced manner, that adds value to the blogosphere, rather than just repeat the IBM press releases of each day. If you are just looking for "announcements" there is an RSS feed for IBM System Storage you cansubscribe to.
Not surprisingly, two of the blog entries that Deni mentions are the ones I get the most comments on:
Last week, David Pogue (New York Times) wrote a blog entry on The Dilemma Over Future Storage Formats.
Of course, he is focused on the home user, and not the bigger mess found in the corporate world, where Federal Rules like the one past last week that begin to mandate that all U.S. companies archive every e-mail and instant message (IM) generated by their employees.
However, the article does bring up issues that effect the corporate world as well. Its not the "format" as much as the medium/player interface. A friend of mine just bought a vintage 8-track-tape player, but has only one 8-track tape to try it out with. He is now looking on eBay for other 8-track tapes.
The idea of keeping old drives around to read back data is not new. A company called eMag Solutions has all kinds of older tape drives to help companiesretrieve data on their older 3420 and 3480 tape cartridges.
The problem is not just accessing the data on the media, but rendering the "ones" and "zeros" into meaningful information. For example, suppose I saved a copy of my Quicken Tax file every year, and copied them onto a singleDVD for long term storage. The problem is that to access 2002 tax data, I have to run that version of the Quicken 2002 program, and hopefully that version will run on my current computer equipment and operating system.
A client I visited earlier this year had to retrieve 4-year-old Oracle data for litigation reasons. However, to make sense of the data, they had to build a server with a down-level version of AIX and down-level version of Oracle to match the level supported by their homegrown application.
One solution might be to find a new format that is appl Luckily, for the corporate world, IBM has a lot of experience in this area, is the leader in Content Management, offers the world's fastest archive/compliance storage, the DR550, clocked at three times faster than the EMC Centera, WORM tape on LTO Generation 3 and 3592 tape cartridges, and software designed to render older formats into readable form. For the home user, IBM's recent "Innovation Jam" identified this as one of the top 10 ideas, the idea of "Digital Me", storing not just old tax documents, but photos, music, home videos, and so on. My aunt Nancy passed away, leaving me a box of old VHS tapes, which I will watch this month as I sort through all my paper receipts getting ready to file for 2006 taxes.
Luckily, for the corporate world, IBM has a lot of experience in this area, is the leader in Content Management, offers the world's fastest archive/compliance storage, the DR550, clocked at three times faster than the EMC Centera, WORM tape on LTO Generation 3 and 3592 tape cartridges, and software designed to render older formats into readable form.
For the home user, IBM's recent "Innovation Jam" identified this as one of the top 10 ideas, the idea of "Digital Me", storing not just old tax documents, but photos, music, home videos, and so on. My aunt Nancy passed away, leaving me a box of old VHS tapes, which I will watch this month as I sort through all my paper receipts getting ready to file for 2006 taxes.Read More]