This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
Registration for the "Meet the Storage Experts" event in Second Life will close this week fornext week's September 20 event. All IBMers, clients and IBM Business Partners are welcome to attend. We will focus this time on DS3000 and N series disk systems, tape systems,and IBM storage networking gear.
If you miss this one, we plan to have another one in November!
August 31 is my good friend Jim Cosentino's retirement day as a full-time employee at IBM. After over 30 years at IBM, in various marketing, sales and consulting roles, he is going to be thinking about happy things instead of working. His last seven years has been at theIBM Poughkeepsie Customer Executive Briefing Center as the lead System Storage presenter.
The past few years, I've traveled with him around the world on various business trips, teaching our IBM sales force and IBM Business Partners about our System Storage offerings, and presenting to clients. He is a class act, always positive, laughing, seeing the bright side of things.
While "spend more time with his family" has become a business cliche, I know Jim will actually enjoy his retirement years, spend more time with his family, take on other pursuits and hobbies, and perhaps do some more traveling.
Jim, if you are reading this, I have one suggestion. I know you have lots of friends within IBM, and count myself as one of them, but may I suggest your first goal is to makeat least three newfriends, to help you in your transition to retirement.
Congratulations Jim! Enjoy your well-deserved retirement!
In his blog Rough Type, Nick Carr asks Where is my CloudBook?and points to John Markoff's 2-part series in the New York Times on computing in the clouds.(Read it here: Part 1, Part 2)
At first, I thought he meant computing while in an airplane, but instead, he is talking about computing on a laptop or other hand-held device that does not have an internal disk drive, no installedoperating system, no internal data storage. Instead, the idea is that you boot from a CD, accessyour data, and even some of your programs, over the internet. John used an Ubuntu Linux LiveCD in his example.
This week, I am in Sao Paulo, Brazil, and was "in the clouds" for over 10 hours flying from Dallas to here.The one time I am guaranteed "off-line" from the internet is on the plane, and I spend enough time on planesthat I am able to get work done despite being "disconnected".
The same reasons people want to get out of having a disk drive on their laptop, are the reasons data centersare getting out of internal disk on their servers.
disks crash, and typically are not protected in any RAID configuration on most laptops
operating systems get infected with viruses and malware
storage on one server is generally inaccessible to every other server
Booting from CD is especially clever. No more worrying about fixing your Windows registry, viruses,corrupted operating system files, or the cruft that accumulates on your C: drive that slowsyou down. The CD is the sameevery time, so it is like running your system with a freshly installed operating system every day.
The need for central repositories of data harkens back to the years of the IBM mainframe. Of course, whatmade sense back then continues to make sense now. The old 3270 terminals stored no data, and instead merelyprovided keyboard input and display text screen output to the vast amount of data stored on the central system.Today, the inputs are different, using your finger or mouse instead to point to what you want, sliding itacross to make things happen, and the output may now include photos, audio and video, but the concept isstill the same.
I carry my Ubuntu Linux LiveCD with me on every business trip. Combined with externally rewriteable media,such as a USB key, you can get work done even when you are in an airplane, and upload it whenyou are back on the net.
The IBM Storage and Storage Networking Symposium concludes today. As typical for manysuch conferences, it ended at noon, so that people can catch airline flights.
TS1120 Tape Encryption - Customer Experiences
Jonathan Barney had implemented many deployments of tape encryption, and shared hisexperiences at two customer locations.
The first company had decided to implement their EKM servers on dedicated 64-bitWindows servers. They had three sites, one in Chicago, Alphareta, and New York City,each with two EKM servers. Each library had a single TS3500 tape library, and pointedto four EKM servers, two local, and two remote.
The clever trick was managing the keystore. They decided that EKM-1 was their trustedsource, made all changes to that, and then copied it to the other five EKM servers.His team deployed one site at a time, which turned out to be ok, but he would notrecommend it. Better to design your complete solution, and make sure that all librariescan access all EKM servers.
This company decided to have a single key-label/key-pair for all three locations, but change it every 6 months. You have to keep the old keys for as long as you have tapesencrypted with those keys, perhaps 10-20 years.The customer found the IBM encryption implementation "elegant" and it can be easily replicated to a fourth site if needed.
The second company had both z/OS and Sun Solaris. Initially they planned to have botha hardware-based keystore on System z, and software-based keystore on Sun, but they realized that System z version was so much more secure and reliable, that it made nosense to have anything on the Sun Solaris platform.
On System z, they had two EKM images, and used VIPA to ensure load balancing fromthe library. Tapes written from z/OS used DFSMS Data Class to determine which tapesare encrypted and which aren't. All Tapes written from Sun Solaris were encryptied, written to a separate logical library partition of the TS3500, which in turn contactedthe System z for the EKM management to provide the keys to use for the encryption.
The "gotcha" for this case was that when they tested Disaster Recovery, they had torecover the two EKM servers first, before any other restores could take place, and thistook way too long. Instead, they developed a scaled-down 10-volume "rescue recovery" z/OS image that would contain the RACF database and all EKM related software to actas the keystore during a disaster recovery. Anytime they make updates, they only haveto dump 10 volumes to tape. Restore time is down to only 2 hours.
He gave this advice to deploy tape encryption:
Some third party z/OS security products, like Computer Associates Top Secret orACF2, require some PTFs to work with the EKM. The latest IBM RACF is good to go.
Getting IP support from IOS to OMVS requires IPL.
At one customer, an OMVS monitor software program killed the EKM because it wasn'tin their list of "acceptable Java programs". They updated the list and EKM ran fine.
DO not update EKM properties file while EKM is running. EKM keeps a lot of stuffin memory, and when it is recycled, copies this back to the EKM properties file, reversing any changes you may have done. It is best to shut down EKM, update theproperties file, then start up EKM back up again. This is why you should always haveat least two EKM servers for redundancy.
TSM for Linux on System z
Randy Larson from our Tivoli group presented this session.There is a lot of interest in deploying IBM Tivoli Storage Manager backup and archivesoftware on Linux for System z. Many customers are already invested in a mainframeinfrastructure, may have TSM for z/OS or z/VM, and want the newer features and functions that are available for TSM on Linux.
TSM has special support for Lotus Domino, Oracle, DB2 and WebSphere Application Servers.TSM clients can send backup data to a TSM server internally via Hipersockets, a virtualLAN feature on the System z platform that uses shared memory to emulate TCP/IP stack.
One of the big questions is whether to run Linux as guests under z/VM, or natively onLPAR. The general deployment is to carve an LPAR and run Linux natively untilyour server and storage administration staff have taken z/VM training classes. Oncetrained, they can easily move native LPAR images to z/VM guests. Unlike VMware that takesa hefty 40% overhead on x86 platforms to manage guests, z/VM only takes 5-10% overhead.
For the TSM database and disk storage pools, Randy recommends FC/SCSI disk, with ext3 file system, combined with LVM2 into logical volumes. ECKD disk and reiserfsworks too. Avoid use of z/VM minidisks. Under LVM2, consider 32KB stripes for the TSM database, and 256KB stripes for the disk storage pools. For multipathing, usefailover rather than multibus method. Read IC45459 before you activate "directio".
The TSM for Linux on z is very much like the TSM on AIX or Windows, and not like theTSM for z/OS. For tape, TSM for Linux on z does not support ESCON/FICON attached tape,you need to use FC/SCSI attached tape and tape libraries. TSM owns the library anddrives it uses, so give it a logical library partition separate from z/OS. ForSun/StorageTek customers, TSM works with or without the Gersham Enterprise Distrbu-Tape(EDT) software. Use the IBM-provided drivers for IBM tape. For non-IBM tape, TSM providessome drivers that you can use instead.
That wraps up my week. This was a great conference! If you missed it, look for the one in Montpelier, France this October. Check out the list of IBM Technical Conferencesto find others that might interest you.
The IBM Storage and Storage Networking Symposium continues ...
DS8300 Benchmark for Global Mirror
Phil Allison of Fidelity National Information Services presented his success switching from competition over to IBM DS8300 disk systems for use with Global Mirror. They had usedPerformance Associates famous PAIO driver to help to the benchmarktesting. They ran the benchmars at 2x and 3x their current workloads to see how well the DS8000 performed,measuring IOPS, MB/sec, and millisecond response time (msec). They were very impressed with their results,staying below their target 0.8 msec for most of their runs.
For the Global Mirror, the did a performance "bake-off" between Ciena CN2000 versus Cisco 9216i. These areimplemented differently. Ciena uses a Layer-2 approach, encapsulating the Fibre Channel packets directlyto transport as SDH/SONET or Gigabit Ethernet (GigE), which required dedicated circuits between JacksonvilleFlorida and Little Rock, Arkansas. By contrast, Cisco uses a Layer-3 approach, encapsulating Fibre Channelpackets within an IP packet, which can leverage existing datacenter-to-datacenter backbone.
To add stress to the benchmarks, they used a "Network Impairment" emulator. These artificially inject errors,lose packets, and other signal loss conditions. Running both Cisco and Ciena under these tests help them decide which to purchase, but also enforced that idea that they made the right choice choosing IBM for theirremote distance mirroring solution.
Comparison of Bare Machine Recovery Techniques
"Bare machine recovery" is the phrase used to restore a machine that has no operating system installed (or thewrong operating system). Dave Canan from IBM Advanced Technical Support did a great job reviewing the variousproducts and techniques available, and the pros and cons of each approach. The ones he covered were:
Tivoli Storage Manager - install fresh Windows Operating System, TSM client, and then follow certain steps
Automated System Recovery(ASR) - a new feature of Windows XP and Windows 2003 works with TSM client
Symantec Ghost - formerly callled PowerQuest Drive Image, there are now two versions: Ghost Home Edition and Ghost Corporate Solution Suite
Cristie Bare Machine Recovery(CBMR) - This is an IBM partner that provides both Linux and Windows PE versions. Cristie includes a license for Windows PE, so no need to use the alternative Bart PE method.
SAN Volume Controller - Customer Experience
Bill Giles of Catholic Medical Center, a hospital in New Hampshire, presented his experienceswith IBM System Storage SAN Volume Controller. They have a mix of IBM System x, System p, andSystem i servers, as well as machines from HP, Sun, and Dell. For applications, they havePicture Archiving and Communicatiion System (PACS) for cardiology and radiology, HL7 Interface engine, Clinical Information System, TSM for backup, and Microsoft Exchange fore-mail.
They deployed SVC on AIX, Solaris, Windows 2000 and 2003. They were very delightedwith the results:
Centralized Storage Provisioning
Consolidating disparate storage into a universal platform
Enables non-disruptive data migration
Increased utilization of existing disk resources
Improved disaster recovery with FlashCopy and Metro Mirror
Birds of a Feather (BOF) sessions
We had two BOFs, one for storage attached to System z operating systems, and another for storage attached to Linux, UNIX and Windows systems. This distinctionmade sense when mainframes could only attach to CKD disks and ESCON/FICON tape,and distributed systems could only do FCP/SCSI, but these days, there are all kindsof convergence going on.
Linux on System z can now attach via FCP to LTO tape and SAN Volume Controller, allowing now a wide range of storage options for that platform. z/OS, z/VM, z/VSEand Linux on System z can all access IBM System Storage N series via NFS.
The format was traditional Q&A panel, we had experts at the front of the room,handling the questions and discussion topics brought up by the audience. I'll spareyou the individual questions and answers.
The blog team is working on re-directs for those who don't see this in time. Depending on which RSS feed reader you use, you may need to unsubscribe/re-subscribe to re-activate. You can updatethe URL for the feed to one of these:
Continuing this week in Las Vegas, we had a great set of sessions today.
Fibre Channel Overview
I like the manner in whichJim Robinson presented this "basics" session on how Fibre Channel works, why it is spelled "Fibre" not "Fiber", and how all the different layers work in the protocol.
IBM Virtualization Engine TS7700 series
Jim Fisher from the IBM Tucson lab presented the TS7700 series, which replaces our Virtual Tape Server (VTS). Hehad performance numbers to show that it was faster in various measurements against the B20 model of the VTS. Itis supported on the z/OS, z/VM, z/VSE, TPF and z/TPF operating systems.
IBM E-mail Archiving and Storage solution
Ron Henkhaus provided an overview of IBM's E-mail Archive and Storage appliance. The solution combines IBM BladeCenter server blade, DS4200 serieswith SATA disk, and pre-installed software: IBM Content Manager, IBM Records Manager, IBM CommonStore for Lotus Domino and Microsoft Exchange, and IBM System Storage Archive Manager. Services are included to get it connected toyour e-mail environment.
Lee La Frese from our Tucson performance lab presented various performance featuresof the IBM System Storage DS8000 series, and how they compare to competition.
First, some interesting statistics.
Back in 2002, the average high-end EnterpriseStorage Server (ESS) model F20 was configured only for 4 Terabytes (TB). In 2004,the average ESS was up to 12 TB. Today, the average DS8100 is 17.4 TB and the averageDS8300 is 41.5 TB.
51 percent of DS8000 series are configured for FCP only (Linux, UNIX, Windows, i5/OS),35 percent FICON only (System z mainframe), and 14% have both mixed.
Average I/O density has stabilized to about 0.6 IOPS per GB. This means that for everyTB of business data, you can expect most applications to issue 600 Input/Output requestsper second.
While IBM SAN Volume Controller has the fastest SPC-1 and SPC-2 benchmarks, the DS8000also has good results. Looking at just the monolithic "scale-up" systems, DS8000 hasthe fastest SPC-1, and second place for SPC-2.
Compared against the EMC DMX-3, the IBM DS8000 series has superior performance.For example, comparing 2Gbps port performance on each, DMX-3 is able to do 20 IOPS perport, compared to DS8000 with 38 IOPS per port.Compared against HDS USP, the response time for 60,000 IOPS for HDS averaged 10.5 milliseconds (msec), compared to IBM DS8000 less than 6.5 msec.
There are some unique features of the DS8000 to optimize performance. Two areAdaptive Multi-stream Prefetching (AMP) which helps improve processing of databasequeries, and HyperPAV which helps on mainframe workloads.
For FATA disks, performance of sequential reads and writes is only 20 percent less than15K RPM FC disks, but a whopping 50 percent less for random access. Consider using FATAfor audio/video streaming, surveillance data, seismic recordings, and medical imaging.
Comparing 146GB 10K versus 300GB 15K from a capacity perspective was interesting.37TB of 300GB 15K had 20 percent better response time, but 25 percent less maximum throughput,than 37TB of 146GB drives. Depending on your workload, this can help decided which youchoose.
Lee also covered RAID rebuild performance. When an individual HDD fails that is part of a RAIDgroup, the DS8000 performs a rebuild onto a spare drive. A RAID-5 rebuild is processedat 52 MB/sec, compared to RAID-10 at 56 MB/sec. Rebuild processing is low priority,so any other workload will take higher priority to avoid impacting application performance.Compared to EMC, the IBM DS8000 can rebuild RAID-5 73GB 15K RPM drive in only 24 minutes, but it takes 37 minutes to do this on a DMX-3. That is 13 minutes of additional exposure where a second drive failure might cause you to lose all your data in that RAID group!
N series ILM and Business Continuity
James Goodwin from our Advanced Technical Support team presented IBM System Storage N series featuresthat relate to ILM and Business Continuity. He covered features like SnapShot, SnapLock,SnapVault and LockVault.
Last week, a writer for a magazine contacted us at IBM to confirm a quote that writing a Terabyte (TB) on disk saves 50,000 trees. I explained that this was cited from UC Berkeley's famousHow Much Information? 2003 study.
To be fair, the USA Today article explains that AT&T also offers "summary billing" as well as "on-line billing", but apparently neither of these are the default choice. I can understand that phone companies send out bills on paper because not everyone who has a phone has internet access, but in the case of its iPhone customers, internet access is in the palm of your hands! Since all iPhone customers have internet access, and AT&T knows which customers are using an iPhone, it would make sense for either on-line billing or summary billing to be the default choice, and let only those that hate trees explicitly request the full billing option.
Sending a box of 300 pages of printed paper is expensive, both for the sender and the recipient. This informationcould have been shipped less expensively on computer media, a single floppy diskette or CDrom for example. Forthose who prefer getting this level of detail, a searchable digitized version might be more useful to the consumer.
Which brings me to the concept of Information Lifecycle Management (ILM). You can read my recent posts on ILM byclicking the Lifecycle tab on the right panel, or my now infamous post from last year about ILM for my iPod.
His recollection of the history and evolution of ILM fairly matches mine:
The phrase "Information Lifecycle Management" was originally coined by StorageTek in early 1990s as a way to sell its tape systems into mainframe environments. Automated tape libraries eliminated most if not all of the concerns that disk-only vendors tout as the problem with manual tape. I began my IBM career in a product now called DFSMShsm which specifically moved data from disk to tape when it no longer needed the service level of disk. IBM had been delivering ILM offerings since the 1970s, so while StorageTek can't claim inventing the concept, we give them credit for giving it a catchy phrase.
EMC then started using the phrase four years ago in its marketing to sell its disk systems, including slower less-expensive SATA disk. The ILM concept helped EMC provide context for the many acquisitions of smaller companies that filled gaps in the EMC portfolio. Question: Why did EMC acquire company X? Answer: To be more like IBM and broaden its ILM solution portfolio.
Information Lifecycle Management is comprised of the policies, processes,practices, and tools used to align the business value of information with the mostappropriate and cost effective IT infrastructure from the time information isconceived through its final disposition. Information is aligned with businessrequirements through management policies and service levels associated withapplications, metadata, and data.
Whitepapers and other materials you might read from IBM, EMC, Sun/StorageTek, HP and others will all pretty much tell you what ILM is, consistent with this SNIA definition, why it is good for most companies, and how it is not just about buying disk and tape hardware. Software, services, and some discipline are needed to complete the implementation.
While the SNIA definition provides a vendor-independent platform to start the conversation, it can be intimidatingto some, and is difficult to memorize word for word.When I am briefing clients, especially high-level executives, they often ask for ILM to be explained in simpler terms. My simplified version is:
Information starts its life captured or entered as an "asset" ...
This asset can sometimes provide competitive advantage, or is just something needed for daily operations. Digital assets vary in business value in much the same way that other physical assets for a company might. Some assets might be declared a "necessary evil" like laptops, but are tracked to the n'th degree to ensure they are not lost, stolen or taken out of the building. Other assetsare declared "strategically important" but are readily discarded, or at least allowed to walk out the door each evening.
... then transitions into becoming just an "expense" ...
After 30-60 days, many of the pieces of information are kept around for a variety of reasons. However, if it isn'tneeded for daily operations, you might save some money moving it to less expensive storage media, throughless expensive SAN or LAN network gear, via less expensive host application servers. If you don't need instantaccess, then perhaps the 30 seconds or so to fetch it from much-less-expensive tape in an automated tape librarycould be a reasonable business trade-off.
... and ends up as a "liability".
Keeping data around too long can be a problem. In some cases, incriminating, and in other cases, just having toomuch data clogs up your datacenter arteries. If not handled properly within privacy guidelines, data potentially exposes sensitive personal or financial information of your employees and clients. Most regulations require certain data to be kept, in a manner protected against unexpected loss, unethical tampering, and unauthorized access, for a specific amount of time, after which it can be destroyed, deleted or shredded.
So ILM is not just a good idea to save a company money, it can keep them out of the court room, as well as help save the environment and not kill so many trees. Now that 100 percent of iPhone customers have internet access, and a goodnumber of non-iPhone customers have internet access at home, work, school or public library, it makes sense for companies to ask people to "opt-in" to getting their statements on paper, rather than forcing them to "opt-out".
Despite this, or perhaps because of this, over 30 percent of IBM's Linux server revenue is onnon-x86 platforms, avoiding the XenSource vs. VMware decision altogether. Both System z (traditional mainframe servers) and System p (traditional UNIX servers) are able to run many Linux images in a fully virtualized manner, without VMware or XenSource.
Philip Rosedale, chief executive of Linden Labs, which produced the Second Life virtual reality environment, said Second Life and Facebook are popular because they give people a new environment to interact in that they are comfortable with.
Of course I have blogged for months now on my involvement in Second Life, and how IBM is investing in this platform for business purposes. Recently, IBM made news for publishing its Code of Conduct,and set of guidelines on how you run your avatar in virtual worlds, including Second Life. IBM recognizesthe business potential of virtual worlds, and has formed the "3D Internet" group exploring the possibilities.Over 5000 IBM employees now use Second Life on a regular basis.
I was surprised to learn that there were over 23,000 IBMers already on Facebook. I used to be on LinkedIn,but found FaceBook to have more IBMers and have made the switch. Recently, we were told that these 23,000 IBMers spend 19 minutes, on average, per day visiting Facebook pages. Nobody askedme how much time I spend every day on FaceBook, but with over 350,000 employees in the company,I am sure some have ways to track the lives of others.
Both of these count as adding more "FUN" into the workplace, which everyone should strive for. It is also good to know that the skills you developusing Second Life or FaceBook can carry over to your next job role or your next employer.The number-one question I get from new colleagues when I mention either these exciting new ways to communicate and collaborate is: "But how is this related to business?"
Second Life is obvious, a new innovative way to hold meetings with colleagues, Business Partners and clients isgoing to have business value. Meetings in Second Life help you focus on what is being discussed, versus a plaintelephone call where your eyes may wander to other things in your view. Of course nothing beatsthe effectiveness of face-to-face meetings, but Second Life offers a more energy-efficient alternative than traveling to other cities or countries.
I would like to welcome IBMer Barry Whyte to the blogosphere!
From his bio:
Barry Whyte is a 'Master Inventor' working in the Systems & Technology Group based in IBM Hursley, UK. Barry primarly works on the IBM SAN Volume Controller virtualization appliance. Barry graduated from The University of Glasgow in 1996 with a B.Sc (Hons) in Computing Science. In his 10 years at IBM he has worked on the successful Serial Storage Architecture (SSA) range of products and the follow-on Fibre Channel products used in the IBM DS8000 series. Barry joined the SVC development team soon after its inception and has held many positions before taking on his current role as SVC performance architect. Outside of work, Barry enjoys playing golf and all things to do with Rotary Engines.
To avoid confusion in future posts, I will refer to Barry Whyte as BarryW, and fellow EMC blogger Barry Burke (aka the Storage Anarchist) as BarryB.
I'm in Chicago this week, but it is actually HOTTER here than in my home town of Tucson, Arizona.
The question is if this is unique or specific to these particular models, or if this affects all kinds of blade servers because of their very nature and architecture. Stephen indicates that they also have HP C class enclosures, but since they are still in test mode, cannot comment on them.
I have no experience with any of HP's blade servers, but I have worked closely with our IBM BladeCenter team to help make sure that our storage, and our SAN equipment, work well together with the BladeCenter, and more importantly, that problems can be diagnosed effectively.
When I asked why people feel they need to know the inner workings of storage, the overwhelming response was to help diagnose problems. This could include problems inplacing related data on a potentially single point of failure, problems with performance, and problems communicating with 1-800-IBM-SERV.
So, if you have encountered problems diagnosing SAN problems with BladeCenter, or find that setting up an IBM SAN with blade servers in general, I would be interested in hearing what IBM can do to make the situation better.[Read More]
Continuing my business trip through Asia, I have left Chengdu, China, and am now in Kuala Lumpur, Malaysia.
On Sunday, a colleague and I went to the famous Petronas Twin Towers, which a few years ago were officially the tallestbuildings in the world. If you get there early enough in the day, and wait in line for a few hours, you can get a ticket permitting you to go up to the "Skybridge" on the 41st floor that connects the two buildings. The views are stunning, and I am glad to have done this.(If you are afraid of heights, get cured by facing your fears with skydiving)
You would think that a question as simple as "Which is the tallest building in the world?" could easily be answered, given that buildings remain fixed in one place and do not drastically shrink or get taller over time or weather conditions, and the unit of height, the "meter", is an officially accepted standard in all countries, defined as the distance traveled by light in absolute vacuum in 1/299,792,458 of a second.
The controversy stems around two key areas of dispute:
What constitutes a building?
A building is a structure intended for continuous human occupancy, as opposed to the dozens ofradio and television broadcasting towers which measure over 600 meters in height. The Petronas Twin Towers is occupied by a variety of business tenants and would qualify as a building. Radio and Television towers are not intended for occupation, and should not be considered.
Where do you start measuring, and where do you stop?
Since 1969, the height was generally based on a building's height from the sidewalk level of the main entrance to the architectural top of the building. The "architectural top" included towers, spires (but not antennas), masts or flagpoles. Should the measurements be only to the top to the highest inhabitable floor?
What if the building has many more floors below ground level? What if the building exists in a body of water, should sidewalk level equate to water level, and at low tide or high tide? (Laugh now, but this might happen sooner than you think!)
To bring some sanity to these comparisons, the Council on Tall Buildings and Urban Habitat has tried to standardize the terms and definitions to makecomparisons between buildings fair. Why does all this matter whose building is tallest? It matters in twoways:
People and companies are willing to pay more to be a tenant in tall towers, affording a luxurious bird's-eyeview to impress friends, partners and clients, and so the rankings can influence purchase or leasing prices of floorspace in these buildings.
Architects and engineers involved in building these structures want to list these on their resume.These buildings are an impressive feat of engineering, and the teams involved collaborate in a global mannerto accomplish them. If an architecture or engineeering company can build the world's tallest building, you can trust themto build one for you. The rankings can help drive revenues in generating demand for services and offerings.
What does any of this have to do with storage? Two weeks ago, IBM and the Storage Performance Councilanswered the question "Which is the fastest disk system?" with apress release. Customers thatcare about performance of their most mission critical applications are often willing to pay a premium to run theirapplications on the fastest disk system, and the IBM System Storage SAN Volume Controller, built through aglobal collaboration of architects and engineers across several countries, is (in my opinion at least) an impressive feat of storage engineering.
Wrapping up my week's discussion on Business Continuity, I've had lots of interest in myopinion stated earlier this week that it is good to separate programs from data, and thatthis simplifies the recovery process, and that the Windows operating system can fit in a partition as small asthe 15.8GB solid state drive we just announced for BladeCenter. It worked for me, and I will use this post to show you how to get it done.
Disclaimer: This is based entirely on what I know and have experienced with my IBM Thinkpad T60 running Windows XP, and is meant as a guide. If you are running with different hardware or different operating system software, some steps may vary.
(Warning: Windows Vista apparently handles data, Dual Boot, andPartitions differently. These steps may not work for Vista)
For this project, I have a DVD/CD burner in my Ultra-Bay, a stack of black CDs and DVDs, and a USB-attached 320GB external disk drive.
I like to backup the master boot record to one file, and then the rest of the C: drive to a series of 690MB compressed chunks. These can be directed to the USB-attached drive, and then later burned onto CDrom, or pack 6 files per DVD.Most USB-attached drives are formatted to FAT32 file system, which doesn't support any chunks greater than 2GB, so splitting these up into 690MB is well below that limit.
You can learn more about these commands here and here.
Step 1 - Defrag your C: drive
From Windows, right-click on your Recycle Bin and select "Empty Recycle Bin".
Click Start->Programs->Accessories->System Tools->Disk Defragmenter. Select C: drive and push the Analyze button. You will see a bunch of red, blue and white vertical bars. If there are any greenbars, we need to fix that. The following worked for me:
Right-click "My Computer" and select Properties. Select Advanced, then press "Settings" buttonunder Performance. Select Advanced tab and press the "Change" button under Virtual Memory.Select "No Paging File" and press the "Set" button. Virtual memory lets you have many programs open, moving memory back and forth between your RAM and hard disk.
Click Start->Control Panel->Performance and Maintenance->Power Options. On the Hibernate tab,make sure the "Enable Hibernation" box is un-checked. I don't use Hibernate, as it seems likeit takes just as long to come back from Hibernation as it does to just boot Windows normally.
Reboot your system to Windows.
If all went well, Windows will have deleted both pagefile.sys and hiberfil.sys, the twomost common unmovable files, and free up 2GB of space. You can run just fine without either of these features, but if you want them back, we will put them back on Step 6 below.
Go back to Disk Defragmenter, verify there are no green bars, andproceed by pressing the "Defragment" button. If there are still some green bars,you can proceed cautiously (you can always restore from your backup right?), or seek professional help.
Step 2 - Resize your C: drive
When the defrag is done, we are ready to re-size your file system. This can be done with commercial software like Partition Magic.If you don't have this, you can use open source software. Burn yourself the Gparted LiveCD.This is another Linux LiveCD, and is similar to Partition Magic.
Either way, re-size the C: drive smaller. In theory, you can shrink it down to 15GB if this is a fresh install of Windows, and there is no data on it. If you have lots of data, and the drive wasnearly full, only resize the C: drive smaller by 2GB. That is how much we freed upfrom the unmovable files, so that should be safe.
You could do steps 2 and 3 while you are here, but I don't recommend it. Just re-size C:press the "Apply" button, reboot into Windows, and verify everything starts correctly before going to the next step.
Step 3 - Create Extended Paritition and Logical D: drive
You can only have FOUR partitions, either Primary for programs, or Extended for data. However, theExtended partition can act as a container of one or more logical partitions.
Get back into Partition Magic or Gparted program, and in the unused space freed up from re-sizing inthe last step, create a new extended/logical partition. For now, just have one logical inside theextended, but I have co-workers who have two logical partitions, D: for data, and E: for their e-mailfrom Lotus Notes. You can always add more logical partitions later.
I selected "NTFS" type for the D: drive. In years past, people chose the older FAT32 type, but this has some limitations, but allowed read/write capability from DOS, OS/2, and Linux.Windows XP can only format up to 32GB partitions of FAT32, and each file cannot be bigger than 2GB.I have files bigger than that. Linux can now read/write NTFS file systems directly, using the new NTFS-3Gdriver, so that is no longer an issue.
Step 4 - Format drive D: as NTFS
Just because you have told your partitioning program that D: was NTFS type, you stillhave to put a file system on it.
Click Start->Control Panel->Performance and Maintenance->Computer Management. Under Storage, select Disk Management. Right-click your D: drive and choose format.Make sure the "Perform Quick Format" box is un-checked, so that it peforms slowly.
Step 5 - Move data from C: to D: drive
Create two directories, "D:\documents" and "D:\notes\data", either through explorer, or in a commandline window with "MKDIR documents notes\data" command.
Move files from c:\notes\data to d:\notes\data, and any folder in your "My Documents" over to d:\documents.
(If you have more data than the size of the D: drive, copy over what you can, run another defrag, resize your C: drive even smaller with Partition Magic or Gparted, Reboot, verify Windows is still working,resize your D: bigger, and repeat the process until you have all of your data moved over.)
To inform Lotus Notes that all of your data is now on the D: drive, use NOTEPAD to edit notes.ini and change the Directory line to "Directory=D:\notes\data". If you have a special signature file, leave it in C:\notes directory.
Once all of your data is moved over to D:\documents, right-click on "My Documents" and select Properties. Change the target to "D:\documents" and press "Move" button. Now, whenever you select "My Documents", youwill be on your D: drive instead.
Step 6 - Take A Fresh Backup
If you use IBM Tivoli Storage Manager, now would be a good time to re-evaluate your "dsm.opt" file that listswhat drives and sub-directories to backup. Take a backup, and verify your data is being backed up correctly.
With the USB-attached, backup both C: and D: drives. I leave my USB drive back in Tucson. For a backup copywhile traveling, go to IBM Rescue and Recovery and take a C:-only backup to DVD. Make sure D: drive box is un-checked. Now, if I ever need to reinstall Windows, because of file system corruption or virus, I can do this from my one bootable CD plus 2 DVDs, which I can easily carry with me in my laptop bag, leaving all my data on the D: drive in tact.
In the worst case, if I had to re-format the whole drive or get a replacement disk, I can restore C: and thenrestore the few individual data files I need from IBM Tivoli Storage Manager, or small USB key/thumbdrive,delaying a full recovery until I return to Tucson.
Lastly, if you want, reactivate "Virtual Memory" and "Hibernation" features that we disabled in Step 1.
As with Business Continuity in the data center, planning in this manner can help you get back "up and running"quickly in the event of a disaster.
Continuing this week's theme on Business Continuity, I will use this post to discuss this week'sIBM solid state disk announcement.This new offering provides a new way to separate programs from data, to help minimizedowntime and outages normally associated with disk drive failures.
Until now, the method most people used to minimize the amount of data on internalstorage was to use disk-less servers with Boot-Over-SAN, however, not all operating systems, and not all disk systems, supported this.
Windows, however, is not supported, because of the small 4GB size and USB protocol limitations. For Windows, you would add a SAS drive, you boot from this hard drive, and use the 4GB Flash drive for data only.
So what's new this time? Here's a quick recap of July 17 announcement. For the IBM BladeCenter HS21 XM blade servers, new models of internal "disk" storage:
Single drive model
A single 15.8GB solid-state disk drive, based on SATA protocol. In addition to theLinux operating systems mentioned above, the capacity and SATA protocols allowsyou to boot 32-bit and 64-bit versions of Windows 2003 Server R2, with plans in placeto other platforms in the future, such as VMware. I am able to run my laptop Windows with only 15GB of C: drive, separating my data to a separate D: partition, so this appears to be a reasonable size.
Dual drive model
The dual drive fits in the space of a single 2.5-inch HDD drive bay.You can combine these in either RAID 0 or RAID 1 mode.
RAID 0 gives you a total of 31.6GB, but is riskier. If you lose either drive,you lose all your data. Michael Horowitz of Cnet covers the risks of RAID zerohere andhere.However, if you are just storing your operating system and application, easily re-loadable from CD or DVD in the case of loss, then perhaps that is a reasonable risk/benefit trade-off.
RAID 1 keeps the capacity at 15.8GB, but provides added protection. If you loseeither drive, the server keeps running on the surviving drive, allowing you to schedule repair actions when convenient and appropriate. This would be the configuration I would recommend for most applications.
Until recently, solid state storage was available at a price premium only. Flash prices have dropped 50% annually while capacities have doubled. This trend is expected to continue through 2009.
According to recent studies from Google and Carnegie Mellon, hard drives fail more oftenthan expected. By one account, conventional hard disk drives internal to the server account for as much as 20-50% of component replacements.IBM analysis indicates that the replacement rate of a solid state drive on a typical blade server configuration is only about 1% per year, vs. 3% or more mentionedin the these studies for traditional disk drives.
Flash drives use non-volatile memory instead of moving parts, so less likely to break down during high external environmental stress conditions, like vibration and shock, or extreme temperature ranges (-0C° to +70°C) that would make traditional hard disks prone to failure.This is especially important for our telecommunications clients, who are always looking for solutions that are NEBS Level 3 compliant.
As with any SATA drive, performance depends on workload.Solid state drives perform best as OS boot devices, taking only a few secondslonger to boot an OS than from a traditional 73GB SAS drive. Flash drives also excel in applications featuring random read workloads, such as web servers. For random and sequential write workloads, use SAS drives instead for higher levels of performance.
Part of IBM's Project Big Green, these flash drives are very energy efficient. Thanks to sophisticated power management software, the power requirement of the solid state drive can be 95 percent better than that of a traditional 73GB hard disk drive. These 15.8GB drives use only 2W per drive versus as much as 10W per 2.5” hard drive and 16W per 3.5” hard drive. The resulting power savings can be up to 1,512 watts per server rack, with 50% heat reduction.
So, even though this is not part of the System Storage product line, I am very excitedfor IBM. To find out if this will work in your environment, go to the IBM Server Provenwebsite that lists compatability with hardware, applications and middleware, or review the latest Configuration and Options Guide (COG).
Continuing this week's theme on Business Continuity, I thought I would explore more on the identification of scenarios to help drive appropriate planning. As I mentioned in my last post, this should be done first.
A recent post in Anecdote talks about the long list of cognitive biases which affect business decision making. This list is a good explanation of why so many people have a difficult time identifying appropriate recovery scenarios as the basis for Business Continuity planning. Their "cognitive biases" get in the way.
Again, using my IBM Thinkpad T60 laptop as an example, here are a variety of different scenarios:
Corrupted File System
Some file systems are more fragile than others. If your NTFS file system gets corrupted, you might be able to run
CHKDSK C: /F
but this just puts damaged blocks into dummy files, it doesn't really repair your files back to their pre-damage level.All kinds of things can damage the file system, including viruses, software defects, and user error.
I keep my programs and data in separate file systems. C: has my Windows operating system and applications, and D: holds my pure data. If one file system is corrupted, the other one might be in tact, mitigating the risk.
Hard Disk Crash
Hopefully, you will have temporary read/write errors to provide warning prior to a complete failure. In theory, if I kept a spare hard disk in my laptop bag, I could swap out the bad drive with the good drive. I don't have that. The three times that I have had a disk failure all occurred while I was in Tucson.
Instead, I keep the few files I need for my trip on a separate USB key, and carry bootable Live CD, which allows you to boot entirely from CDrom drive, either to run applications, or perform rescue operations.
The latest one that I am trying out is Ubuntu Linux, which has OpenOffice 2.2 that can read/write PowerPoint, Word, and Excel spreadsheets; Firefox web browser; Gimp graphics software; and a variety of other applications, all in a 700MB CDrom image. I even have been able to get Wireless (Wi-Fi) working with it, and the process to create your own customized Live CD with the your own application packages is fairly straightforward. Combined with a writeable USB key, you can actually get work done this way. Special thanks to IBM blogger Bob Sutor for pointing me to this.
(If you have a DVD-RAM drive, there are bigger Live CDs from SUSE and RedHat Fedora that provide even more applications)
Laptop Shell Failure
This might catch some people by surprise. I have had the keyboard, LCD screen, or some essential port/plug fail on my laptop. The disk drive and CDrom drive work fine, but unless you have another "laptop" to stick them into, they don't help you recover. This can also happen if the motherboard fails, or the battery is unable to hold a charge.
IBM provides a 24-hour turn around fix. Basically, IBM sends me a laptop shell, no drive, no CDrom, with instructions to move the disk drive and CDrom drive from your broken shell, to the new shell, then send the bad shell back in the same shipping box.
Here, again, I am thankful that I keep my key files on an USB key. Often I travel with other IBMers, and can borrow their laptop to make presentations, check my e-mail, or other work, until I can get my replacement shell. In you are travelling outside the US, you might be able to move your disk drive into a colleague's laptop, access the data, copy it to your USB key or burn a copy on CD or DVD.
In a data center, many outages are really "failures to access data", but the data is safe. For example, power outages, network outages, and so on, can prevent people from using their IT systems, but the data is safe when these are re-established.
At times, I have been temporarily separated from my laptop. Three examples:
A higher level executive had technical difficulties with his laptop, and usurped mine instead.
A colleague forgot his power supply for his laptop, and borrowed my laptop instead. (I wish there were a standard for laptop power plug connectors)
Customs agents confiscate your laptop, give you a receipt, and eventually you get it back.
In all cases, I was glad that no "recovery" was required, and that the few files I needed were on my USB key. A few times, I was able to get by on the machines available at the nearest Internet Cafe, in the meantime.
With some imagination, you can recognize that this scenario is similar to the previous one for laptop shell failure.Here is a good example that you can identify different scenarios, and then later discover they have similar properties in terms of recovery, and can be treated as one.
Laptops are stolen every day. Luckily, I've only had this happen twice to me in my career at IBM, and I managed to get a replacement soon enough. The key lesson here is to keep your USB key and recovery media in separate luggage.I know it is more convenient to keep all computer-related stuff in one place, but a thief is going to take your whole laptop bag, to make sure that all cables and power supplies are included, and is not going to leave anything behind. That would just slow them down.
In each case, some brainstorming, or personal experience, can help identify scenarios, identify what makes them unique from a recovery perspective, and plan accordingly. If you looking to create or upgrade your Business Continuity plan, give IBM a call, we can help!
This week and next I am touring Asia, meeting with IBM Business Partners and sales repsabout our July 10 announcements.
Clark Hodge might want to figure out where I am, given the nuclearreactor shutdowns from an earthquake in Japan. His theory is that you can follow my whereabouts just by following the news of major power outages throughout the world.
So I thought this would be a good week to cover the topic of Business Continuity, which includes disaster recovery planning. When making Business Continuity plans, I find it best to work backwards. Think of the scenarios that wouldrequire such recovery actions to take place, then figure out what you need to have at hand to perform the recovery, and then work out the tasks and processes to make sure those things are created and available when and where needed.
I will use my IBM Thinkpad T60 as an example of how this works. Last week, I was among several speakers making presentations to an audience in Denver, and this involved carrying my laptop from the back of the room, up to the front of the room, several times. When I got my new T60 laptop a year ago, it specifically stated NOT to carry the laptop while the disk drive was spinning, to avoid vibrations and gyroscopic effects. It suggested always putting the laptop in standby, hibernate or shutdown mode, prior to transportation, but I haven't gotten yet in the habit of doing this. After enough trips back and forth, I had somehow corrupted my C: drive. It wasn't a complete corruption, I could still use Microsoft PowerPoint to show my slides, but other things failed, sometimes the fatal BSOD and other times less drastically. Perhaps the biggest annoyance was that I lost a few critical DLL files needed for my VPN software to connect to IBM networks, so I was unable to download or access e-mail or files inside IBM's firewall.
Fortunately, I had planned for this scenario, and was able to recover my laptop myself, which is important when you are on the road and your help desk is thousands of miles away. (In theory, I am now thousands of miles closer to our help desk folks in India and China, but perhaps further away from those in Brazil.) Not being able to respond to e-mail for two days was one thing, but no access for two weeks would have been a disaster! The good news: My system was up and running before leaving for the trip I am on now to Asia.
Following my three-step process, here's how this looks:
Step 1: Identify the scenario
In this case, my scenario is that the file system the runs my operating system is corrupted, but my drive does not have hardware problems. Running PC-Doctor confirmed the hardware was operating correctly. This can happen in a variety of ways, from errant application software upgrades, malicious viruses, or in my case, picking up your laptop and carrying it across the room while the disk drive is spinning.
Step 2: Figure out what you need at hand
All I needed to do was repair or reload my file sytem. "Easier said than done!" you are probably thinking. Many people use IBM Tivoli Storage Manager (TSM) to back up their application settings and data. Corporate include/exclude lists avoid backing up the same Windows files from everyone's machines. This is great for those who sit at the same desk, in the same building, and would be given a new machine with Windows pre-installed as the start of their recovery process. If on the other hand you are traveling, and can't access your VPN to reach your TSM server, you have to do something else. This is often called "Bare Metal Restore" or "Bare Machine Recovery", BMR for short in both cases.
I carry with me on business trips bootable rescue compact discs, DVDs of full system backup of my Windows operating system, and my most critical files needed for each specific trip on a separate USB key. So, while I am on the road, I can re-install Windows, recover my applications, and copy over just the files I need to continue on my trip, and then I can do a more thorough recovery back in the office upon return.
Step 3: Determine the tasks and processes
In addition to backing up with IBM TSM, I also use IBM Thinkvantage Rescue and Recovery to make local backups. IBM Rescue and Recovery is provided with IBM Thinkpad systems, and allows me to backup my entire system to an external 320GB USB drive that I can leave behind in Tucson, as well as create bootable recovery CD and DVDs that I can carry with me while traveling.
The problem most people have with a full system backup is that their data changes so frequently, they would have to take backups too often, or recover "very old" data. Most Windows systems are pre-formatted as one huge C: drive that mixes programs and data together. However, I follow best practice, separating programs from data. My C: drive contains the Windows operating system, along with key applications, and the essential settings needed to make them run. My D: drive contains all my data. This has the advantage that I only have to backup my C: drive, and this fits nicely on two DVDs. Since I don't change my operating system or programs that often, and monthly or quarterly backup is frequent enough.
In my situation in Denver, only my C: drive was corrupted, so all of my data on D: drive was safe and unaffected.
When it comes to Business Continuity, it is important to prioritize what will allow you to continue doing business, and what resources you need to make that happen. The above concepts apply from laptops to mainframes. If you need help creating or updating your Business Continuity plan, give IBM a call.
Seth Godin has an interesting post titled Times a Million.He recounts how many people determine the fuel savings of higher-mileage cars to be only $300-$900 per year,and that this is not enough to motivate the purchase of a more-efficient vehicle, such as a hybrid orelectric car. Of course, if everyone drove more efficient vehicles, the benefits "times a million" wouldbenefit everyone and the world's ecology.
When I discuss storage-related concepts, many executives mistakenly relate them to the one area of information technologythey know best: their laptop. Let's take a look at some examples:
Information Lifecycle Management
Information Lifecycle Management (ILM) includes classifying data by business value, and then using this to determineplacement, movement or deletion. If you think about the amount of time and effort to review the files on yourindividual laptop, and to manually select and move or delete data, versus the benefits for the individual laptopowner, you would dismiss the concept. Most administrative tasks are done manually on laptops, because automatedsoftware is either unavailable or too expensive to justify for a single owner.
In medium and large size enterprises, automated software to help classify, move and delete data makes a lot of sense.Executives who decide that ILM is not for their data center, based on their experiences with their laptop, are losingout on the "times a million" effect.
Laptops have various controls to minimize the use of battery, and these controls are equally available when pluggedin. Many users don't bother turning off the features and functions they don't need when plugged in, because theyfeel the cost savings would only amount to pennies per day.
Times a million, energy savings do add up, and options to reduce the amount used per server, per TB of data stored, not only save millions of dollars per year, but can also postpone the need to build a new data center, or upgrade the electrical systems in your existing data center.
Backup and Disaster Recovery planning
I am not surprised how many laptops do not have adequate backup and disaster recovery plans. When executives thinkin terms of the time and effort to backup their data, often crudely copying key files to CDrom or USB key, and worryingabout the management of those copies, which copies are the latest, and when those copies can be destroyed, theymight reject deploying appropriate backup policies for others.
Times a million, the collected data stored on laptops could easily be half of your companies emails and intellectual property. Products like IBM Tivoli Storage Manager can manage a large number of clients with a few administrators,keeping track of how many copies to keep, and how long to keep them.
So, next time you are looking at technology or solutions for your data center, don't suffer from "Laptop Mentality". Focus instead on the data center as a whole.
A client complained that their tape drives were not compressing data as well as it used to. Investigating further reminded me of a scene from the 1970's television show "All in the family", summarized well inAmerican Scientist:
... in one episode of All in the Family, Archie Bunker's son-in-law, Mike, watches Archie put on his shoes and socks. Mike goes into a conniption when Archie puts the sock and shoe completely on one foot first, tying a bow to complete the action, while the other foot remains bare. To Mike, if I remember correctly, the right way to put on shoes and socks is first to put a sock on each foot and only then put the shoes on over them, and only in the same order as the socks. In an ironic development in his character, the politically liberal Mike shows himself to be intolerant of differences in how people do common little things, unaccepting of the fact that there is more than one way to skin a cat or put on one's shoes.
Both agreed that socks go first, then shoes, but the actual deployment was different.
In the case of this customer, a recent change was the use of "encryption" before the data reached the tape drive. In regards to compression and encryption, you should always compress first, then encrypt. Compression algorithms rely on frequency of data, for example the letter "E" appears more often in the English language than the letter "Z". However, once you encrypt data, those data patterns are randomized, and any attempt to compress the data afterwards is wasted effort.
With IBM tape encryption on either the TS1120 or LTO4 tape drives, we compress, then encrypt, the data when it arrives to the tape drive, so that the compression has some chance of getting up to 3:1 reduction. This compress-then-encrypt process can be done at the host as well, either from the application software or feature of the operating system.
So, just as the case between Archie Bunker and his son-in-law, there are many ways to deploy compression and encryption, just make sure you do them in the right order to get the most benefit.
Last week, I opined that Monday's IDC announcement "IBM #1 in combined disk and tape storage hardwaresales for 2006" was in part because of a resurgence of interest in tape, with four specific examples. There was a lot of reaction and reflection fromboth sides.
On the one side...
EMC blogger Mark Twomey at Storagezilla admits that perhapsTape Isn't Dead after all,is perhaps the best place to put long-term archive data, but not for backup? EMC's "creative marketing types" put out this Fun With Tape video that I found amusing. (It asks for a first name,last name, and e-mail address, which are then embedded into the resulting video itself, and perhaps forwarded to your nearest EMC sales rep, so answer according to your wishes for privacy).
The "mummy wrapped in tape media" seems to be a common theme, and shows up again in LiveVault'svideo with John Cleese, which makes the same argument asthe EMC video above, namely: switch your backups from tape to disk because we are a disk-only vendor.
... and on the other side
JWT over at DrunkenData asks Which is greener, disk or tape?Tape is, of course, by a long shot, and an essential part of IBM's Big Green initiative, a project to invest$1US Billion dollars per year for data centers to be more efficient for power and cooling.
Sun/StorageTek blogger Randy Chalfant questions the Death of Tape, and argues thatdisk-only solutions suffer from atrophy.The results he posts from a survey of 200 customers are similar to those we've seen with customers using IBM TotalStorage Productivity Center, our software to help evaluate data usage, and identify misuse, in your data center.
To my readers in the USA, United Kingdom, Ireland, South Africa, China and Japan, and a few other countries, Happy Father's Day!