As you can imagine, I get a lot of email from around the world. This one, from a loyal reader from overseas, was particularly interesting. Normally, I would direct them to read the fantastic manual [RTFM], but decided instead to go ahead and tackle it here in my blog.
I will tackle this in three steps.
First, let's attach "Server 1" and the FlashSystem 900 to the SAN fabric. IBM Spectrum Virtualize can handle one, two or even four separate fabrics. Let's assume you have a dual-port Host Bus Adapter (HBA) in server 1, and two redundant fabrics. We will connect each server port to each FCP switch. Likewise, we will connect each FCP switch to the FlashSystem 900, carve up "Volume 1", and create SAN "Zone A1" and "Zone A2", which identify "Server 1" as the initiator, and "FlashSystem 900" as the target. This is all basic stuff.
For those who want to follow along, I suggest you review the full implementation guidance in the IBM Redbook [Implementing the IBM Storwize V7000 Gen2]. Here is an excerpt:
"All Storwize V7000 Gen2 nodes in the Storwize V7000 Gen2 clustered system are connected to the same SANs, and they present volumes to the hosts. These volumes are created from storage pools that are composed of mDisks presented by the disk subsystems. The fabric must have three distinct zones:
Second, we connect the Storwize V7000 Gen2 to the FCP switches. You don't need to connect all of the ports, but I recommend that you have each controller node to each FCP switch, requiring four cables. Add more connections for added performance bandwidth.
Carve up "Volume 2" and this will be referred to as a "managed disk", mDisk for short, and create a "storage pool" which were formerly known as a "managed disk group" which is why you often see MDG in the naming conventions and examples. Storage pools can have one or more managed disks, and you can add more dynamically as needed.
The "storage zone" indicates the Storwize V7000 Gen2 as the initiator, and the FlashSystem 900 as target. If you want to increase the performance bandwidth, consider more cables between the FCP switches and the FlashSystem 900. We create "Zone B1" and "Zone B2". I recommend a separate "storage zones" for each additional storage system that you choose to attach to the Storwize V7000 Gen2.
The "cluster zone" that connects all of the Storwize V7000 Gen2 node ports together for node-to-node (intra-cluster) communication. Storwize V7000 Gen2 ports can serve as both initiators and targets dynamically. For example, when you write to one node, the node then copies the cache block over to the second node so there are two copies stored safely on separate nodes. Since we have two fabrics, we create "Zone C1" and "Zone C2".
Third, we connect "Server 2" to FCP switches, same as we did with "Server 1". We create "Volume 3" which is a "virtual disk, or vDisk for short, from the storage pool containing Volume 2. The "host zone"indicates Server 2 as the initiator, and Storwize V7000 Gen2 as the target. We create "Zone D1" and "Zone D2". I recommend putting each additional server in its own set of host zones.
In theory, you could have a server connected to both Volume 1 and Volume 3. For example, a Windows server would have a "C:" drive connected directly to FlashSystem 900 for high-speed performance, and have a "D:" drive on Storwize V7000 Gen2 to contain data. The Storwize V7000 Gen2 introduces 60 to 100 microseconds of added latency, but provides added value such as FlashCopy, Thin Provisioning, and Real-time compression.
Of course, there are unique situations that might require special configurations, depending on the servers, operating systems, host bus adapters, FCP switches, and storage systems involved.
In the 2004 comedy ["A Day Without a Mexican"], the director envisions how disruptive life would be in California if all the Mexicans suddenly disappeared. The point is that sometimes you take things in the background for granted.
I was reminded of this when I saw Mark Underwood's blog post [Mainframe: Still Not Crazy After All These Years]. The article reminds us how critical IBM z Systems mainframes (and related storage like the IBM DS8880 disk systems) are in our lives. Here's an excerpt:
What would a comparable film depicting "A Day without a Mainframe" be like? I would imagine it somewhere between a disaster movie like  and an end-of-the-world zombie horror movie like [28 Days Later]. I would gladly take a million dollars to write the screenplay!
(FCC Disclosure: I work for IBM and am a filmmaker as well. Earlier in my career, I was chief architect of IBM's Data Facility Storage Management Subsystem (DFSMS) which manages around 80 percent of the world's corporate data. This blog post can be considered a "paid celebrity endorsement" for IBM's z13 System mainframes and DS8880 Disk Systems. I have personal experience with both and highly recommend them. I am neither a Mexican nor resident of California, but work regularly with both in my job responsibilities. Like Warren Buffett, I also own stock in both IBM and Berkshire Hathaway companies. I had no involvement in the making of any of the major motion pictures mentioned in this blog post, have no financial interest in their distribution, and have not been provided any compensation for mentioning them in this blog post. They are all great movies worth watching!)
What do you think the movie would be like? Enter your comments below!
Happy New Year!
Well, it's Tuesday again, and you know what that means? IBM Announcements!
This week, the new model 314 is [now available in all countries] that IBM does business in.
(Actually, the [XIV Model 314] was announced on Nov 10, 2015 last year, but announcements made in November and December are often overlooked between distractions like holidays and year-end processing. Today's announcement was to eliminate the "not available in some countries" restriction. The last time I mentioned on this blog that a product was not available in some countries, I had tons of questions of "why". Hopefully, waiting until a product is available in all countries eliminates that concern.)
What does the XIV model 314 offer? IBM doubled the processors, up to 180 cores, and doubled the DRAM cache, up to 1440 GB. Both of these changes were done to improve the Real-time compression capability.
To reduce test effort cycle time, IBM simplified the configuration options:
Through a combination of thin provisioning and compression, you can define up to 2 PB of soft capacity per rack.
The firmware v11.6.1 reduces the minimum volume size for compression from 103GB to 51GB. Firmware perpetually licensed for Spectrum Accelerate can be used with the XIV Model 314.
Happy Holidays everyone!
Every December, the "birthday boys" -- Bill, Kris and I -- celebrate our birthdays. For me, it is the big five-0h. According to a recent Harris poll, it is [America's favorite age!] For some people, [fifty is the new thirty]!
From left to right: Melinda Jensen, Bill Terry, Lee Olguin, Kris Keller, Tony Pearson, and Kristy Knight.
The storage, cloud and analytics team celebrated with cake and party hats. None of us "birthday boys" eat chocolate, so this year we chose a new flavor: Strawberry Cream! It was delicious.
It was a good time to reflect on our success and accomplishments. In 2015, I helped close over $270 million USD in revenues for IBM, meaning that I helped close over a million [per day on the job].
The IT industry went through a lot of changes also. Hewlett-Packard [split into two smaller pieces]. Dell started [EMC's fade to non-existence]. Cisco and IBM joined forces to create VersaStack, a converged system that combines the most popular x86 servers with the industry's best storage. Analysts recognized IBM's leadershp in today's [Cognitive Era].
Looking forward to an exciting 2016!
My friends over at Appcessories sent me an awesome infographic on the Internet of Things. If you happen to receive any gifts this holiday related to any of these categories, mention them in the comments below!
Enjoy your time off with friends and family!