This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
It's September, and many students are going back to school. A friend had asked me for advice to give his son as he enters high school. Here were my thoughts.
(FTC Disclosure: I work for IBM. I have not received any compensation from any third parties for the products or services mentioned in this post.)
I highly endorse David Allen's book [Getting Things Done]. Trying to remember all of the homework, tasks and assignments that you need to get done can add unnecessary stress.
The trick is to write these things down. Whether this is on paper, or electronically, David's GTD process works.
Students should learn to become "Search Ninjas" in finding information to complete their homework and tasks. To that end, I recommend using a site like "LastPass" to store unique passwords for each online service.
LastPass is short for "the last password you will ever need to remember", as it stores all of your passwords for banking, social media, and other online resources. One strong password gets you in. This is further strengthened by two-factor authorization, such as using "Google Authenticator". In this manner, to log into your LastPass account, you need both your strong password, as well as access to your smartphone for Google Authenticator to provide a six-digit code to validate your identity.
Writing your thoughts down sometimes requires different approaches. A [mind map] is a hierarchical diagram to help capture thoughts non-linearly. I have seen these used to capture thoughts generated during idea brainstorming sessions. I use them to help me create new PowerPoint presentations.
There are many mind mapping tools available. On my smartphone, I use the [SimpleMind] app. On my Linux laptop, I use [View Your Mind]. Try several out, and pick the one that works best for you.
The trick is to identify which general pattern a specific problem falls under, and use the general solution as the basis for solving it. Part of this approach is to identify all of the inherent contradictions and eliminating or addressing them one by one.
Whenever Rafael complains to me he has a problem to solve, like figuring out how to get the oil changed in his car, I ask him how he would solve it in a video game. He would reply that he would determine what "items" he needed, either to trade or gain entry into a realm, and what sequence of steps needed to happen in what order. I would then explain that life is just like that, except instead of jewels and swords, you are using cash or credit cards!
Not surprisingly, IBM technology can be found in certain models of Sony PlayStation, Nintendo Wii, and Microsoft Xbox.
Imagine having homework in three different subjects. A student might spend all night on one topic, and never get around to the other two. The [Pomodoro Technique] is surprisingly simple. It focuses on two problems kids have these days: getting started, and staying focused.
The technique divides up the hours available into 25-minute slots, with 5-minute breaks in between. For example, the student might spend the first 25 minutes on math homework, then take 5-minute break playing video games, then 25 minutes reading History, then 5-minute break checking Facebook, then 25 minutes completing an essay for Spanish class. Each 5-minute break helps to clear the mind for the next task.
I use this method at work. Often, I have a variety of tasks facing me, booking flights for my next trip, updating PowerPoint presentations, and writing my next blog post. Breaking up the day into smaller 25-minute segments helps me stay focused.
In Italian, "pomodoro" means tomato, and the 25 minutes was inspired by a 25-minute kitchen timer shaped like a tomato. You certainly don't need a tomato-shaped timer to use this technique, as there are smartphone apps available to do this for you.
High school is a good time to start developing good habits in project management, time management, problem solving and password security.
Do you have any suggestions? Please feel free to contribute in the comment section below!
Last week, September 11-13, I was in Johannesburg for the IBM Technical University! The event was held at the Hyatt Regency in the Rosebank section of town. This event was focused on IBM Systems, including storage, Power systems, and IBM Z mainframe servers. Here is my recap for the third and final day:
What else can you use that data for? Adventures in Data Reuse
Did you know that IBM invented "Copy Data Management" in 1998? I do, of course, since I was one of the inventors! Originally developed for DFSMS on z/OS, there are now copy data management solutions for a multitude of operating systems, databases and applications.
This session covered IBM Spectrum Protect Snapshot, IBM Spectrum Protect Plus, and IBM Spectrum Copy Data Management.
Copies of production data are not just for data protection and disaster recovery. The copies can be reused for other IT or business purposes:
Testing and DevOps - After a copy of production is made, columns of databases containing sensitive, personally-identifiable information (PII) can be masked, scrambled or obfuscated, to keep them out of the prying eyes of testers and developers. IBM Spectrum Copy Data Management offers data masking features.
Reporting and Analytics - Running reports or analytics against production data can drastically impact performance and cache hit rate on storage devices. Making copies to other systems, and running reports and analytics elsewhere makes a lot of sense.
Hybrid Cloud - Why limit your copies to just your own data center? Copies of data can be sent to off-premises to perform DevOps, Reporting and Analytics in the cloud.
Be Persistent in your Journey to Private Cloud
IBM offers persistent storage for IBM Cloud Private deployments. This includes IBM Spectrum Virtualize family of products, Spectrum Accelerate family of products, VersaStack converged systems, and DS8000 systems.
IBM Spectrum Access blueprints are available to deploy persistent storage for IBM Cloud Private software on VersaStack, POWER and IBM Z servers.
IBM Spectrum Connect provides the necessary interfaces for Kubernetes to claim persistent storage for Docker containers.
Is your data center ready for NVMe, NVMe-OF or FC-NVMe? Initiated in 2011, the NVMe standard is relatively young. I covered its short history, why zero-copy protocols like FCP and RDMA can drastically reduce latency, and all the components needed for a complete end-to-end solution.
Inside All-Flash Arrays, you can use standard 12Gbps SAS to connect to SCSI-based Solid-State Drives (SSD), or you can use the much faster PCiE bus at 32Gbps with NVMe-based drives.
NVMe provides for advanced parallelism, since flash is not mechanical, and does not rely on the position of a read/write head over a platter as spinning disks do. Traditional SSD pretend to be spinning disks, so often process one command at a time, to maintain the charade.
NVMe is designed to work only with flash devices, so it uses a streamlined 15 commands, versus the 34 commands in SCSI to handle other storage media.
But having an NVMe-inside All-Flash Array is not the end of the story. Rather than sending all of those SCSI commands across network, only for some to be disregarded when they arrive, you can send the streamlined NVMe commands instead. NVMe over the networks is available now. NVMe-OF offers support for Ethernet and InfiniBand, and FC-NVMe offers support for FCP.
The last stage is application exploitation from the host server. The industry still needs Operating System drivers, multipathing drivers, and applications that take advantage of NVMe. IBM anticipates this will occur later this year, and into 2019.
IBM Storage Infrastructure Optimization (SIO) assessment
Ishmail Shaik, IBM Lab Services, presented an interactive peek of what an SIO entails.
In 2005, I led a series of "Information Lifecycle Management" (ILM) studies for various clients, combining the methods from "disk studies" and "tape studies" that I had performed since the 1980s.
The ultimate win-win scenario, these ILM studies proved successful, not only saving the clients millions of dollars, but often resulting in follow-on sales of IBM storage hardware, software and services.
Over those 18 months, I trained several IBM Systems Lab Services colleagues in the process. These studies formed the basis of "Storage Infrastructure Optimization" assessments launched officially in 2011.
The SIO assessment process has evolved a lot since I was last involved with it. Here are a few of the changes I noticed from his presentation:
Core Modules - No longer just focused on Lifecycle Management, SIO studies offer four additional modules: Modernize & Transform, Business Resiliency, Manage & Control, and New Workloads.
Data Collection - The biggest challenge back then was collecting data to provide recommendations. I managed with in-person interviews and what little tools were available back then, collected into TCO spreadsheets, VISIO diagrams and PowerPoint slides. Today, we have sophisticated data collection tools, including IBM Spectrum Control, Storage Insights, Arxview, and Butterfly.
Engagement Workshop - SIO now has incorporated "Design Thinking" methodology to help clients prioritize findings into a set of short-term, medium-term and long-term recommendations.
The three-day event ended with a closing session, hosted by Mario Franzone.
Last week, September 11-13, I was in Johannesburg for the IBM Technical University! The event was held at the Hyatt Regency in the Rosebank section of town. This event was focused on IBM Systems, including storage, Power systems, and IBM Z mainframe servers. Here is my recap for the second day:
Nutanix 101: Intro to Hyperconverged Infrastructure and Private Cloud on IBM Power Systems
I attended this based on the abstract for this session:
"Learn in this session why IBM has partnered with Nutanix around hyperconvergence, how this architecture can help drive simplicity, performance and cost efficiency into your IT landscape. You will get both a high level overview on Nutanix, as well as how IBM CS Series is using the Nutanix software to deliver a worldclass application platform, followed by a live demo to show you how Nutanix works."
Sadly, I felt the title and abstract were partially misleading.
Rui Gonclaves from Nutanix gave a nice overview of how Nutanix software can help drive simplicity and cost efficiency to x86 server deployments. It supports VMware, Hyper-V and its own version of Linux KVM called the Acropolis Hypervisor (AHV). Its PRISM software helps to provide one-click management convenience for a cluster of x86 servers.
Nutanix considers its software to be the value of the solution, and treats the servers it runs on as mere commodities. By partnering with IBM, Nutanix adds another concubine to its harem. The only subtle reference to the new CS models was an IBM logo among the logos of Lenovo, HP, DellEMC, and Cisco UCS. Rui failed to cover any details of the CS models, nor their advantages over x86 servers.
(IBM, on the other hand, considers its hardware to be the value of the solution, and treats the applications as commodities. IBM Power servers are able to run open source databases like MongoDB and EnterpriseDB better. For example, a 3-node cluster of IBM CS822 servers (22-core models) was able to run more than twice the transactions per second (tps) per dollar than a comparable cluster of 24-core Dell CX630-10 machines.)
Rui finished his presentation 25 minutes early, so there would have been enough time to cover the CS models, or show a live demo, but that didn't happen either.
Save the World! Save your IT Budget with IBM Cloud Object Storage
All of the presenters at this conference were asked to come up with fun and quirky titles for their sessions. Since clients use IBM Cloud Object Storage (COS) to save large repositories of active archives, the phrase "Save the World!" has a double meaning.
IBM has clients with more than 100 PB deployments of IBM Cloud Object Storage, so the idea that you can "Save the world's amount of data" was not too outrageous.
IBM COS is relatively inexpensive, at a total cost of ownership that is up to 70 percent less expensive than traditional disk-based solutions. A lot of your data is probably static, stable, unstructured content ideal for low-cost storage with IBM COS, so the idea that you can save your IT budget wasn't outlandish either.
Discover advanced features & last announcements with IBM Spectrum Virtualize
When I saw this title, I was afraid it might overlap too much with my session "Dip your TOE in our Pool". Instead, Dominique Salomon from the IBM Client Experience Center in Montpelier France, presented a great overview of the basic and advanced features of Spectrum Virtualize family of products.
He cover automated tiering with IBM Easy Tier, data footprint reduction with Thin Provisioning, Compression and Deduplication, as well as Copy Services like FlashCopy and remote mirroring.
How big is your NAS? Sizing, Management, and Deployment
While I had fun coming up with fun and quirky titles for their sessions, their drawback is that it forces people to read the abstracts to understand what will be covered in each session.
In this session, I covered IBM's three main NAS offerings: Spectrum Scale, Spectrum NAS, and IBM Cloud Object Storage with NAS gateways from Ctera Networks, Avere, Panzura, and Nasuni.
The rest of the session was IBM's new File and Object Storage Design Engine (FOS-DE) studio, an online tool to help decide which of the three NAS solutions is the best fit, and rough sketch configuration that meets a client's specific capacity and performance requirements.
The FOS-DE tool is available at no charge to all IBM employees, IBM Business Partners, and prospective clients.
I wasn't planning to give a live demo, but I ended ten minutes early, and had decent Wi-Fi connection, so I was able to demonstrate the FOS-DE studio with the remainder of my time slot.
Nightmares and Dreams: Manage your entire Storage Infrastructure with IBM Spectrum Control and Storage Insights
What keeps you up at night? That was the question that motivated the title of this session. I organized this topic into three segments:
Visibility - Can you even understand your storage infrastructure? IBM Storage Insights is available at no additional charge for IBM block storage devices, and can greatly enhance your visibility into your capacity growth, performance bottlenecks, and other vital insights.
Control - Reporting is not enough, you need to take action? IBM Spectrum Control Standard Edition, Spectrum Connect, and Copy Services Manager can help configure, provision and perform other actions needed to your storage infrastructure.
Automation - As data centers grow, the actions required often overwhelm existing IT staff. IBM Spectrum Control Advanced Edition adds analytics and automation.
Johannesburg is nine hours ahead of my home town in Tucson, Arizona. Jet lag hit me hard this second day, so I opted out of the evening activities, and got some much needed rest.
Last week, September 11-13, I was in Johannesburg for the IBM Technical University! The event was held at the Hyatt Regency in the Rosebank section of town. This event was focused on IBM Systems, including storage, Power systems, and IBM Z mainframe servers. Here is my recap for the first day:
Opening Keynote Session
The conference was opened by a warm welcome from Ronnie Moodley, IBM Executive for Systems Hardware. He explained that we live in a VUCA world. For those who have not heard this term before, it is a four-letter acronym that conflates four different business challenges: [Volatility, Uncertainty, Complexity, and Ambiguity].
Ronnie also mentioned the shifts in marketing, from the "four P's" to the "four E's":
Clients are no longer evaluating individual products, but also services that come with it, the context on how it is used, the identify of users, and other characteristics that provide a complete experience.
With so many free, open-source alternatives, the question is not comparing the prices of competing products, but what do you exchange for choosing one option for another. Often referred to as the total cost of ownership (TCO) or "opportunity cost" in economic terms.
The Internet and cloud technologies now allow people to buy and use products practically anywhere. Having a bricks-and-mortal location on a busy street corner may no longer be a competitive advantage.
Old marketing methods relied on uni-directional promotion from corporate marketing teams. Today, social media, blogs, and word-of-mouth evangelism are providing greater influences on purchase decision.
The second segment was "The World is our Lab", by Kugendran Naidoo, IBM Research South Africa. Unlike some companies that consolidate all of their research to one location, IBM does research across the globe, with two locations in Africa (Nairobi, Kenya and here in Johannesburg, South Africa).
Dr. Naidoo explained that often research leads us into areas we weren't expecting. For example, an algorithm developed to detect black holes in space failed, but it turned out to be useful for detecting Wi-Fi hot spots.
This begins back in 1974, when Stephen Hawking theorized that under certain circumstances, small black holes might "evaporate" — and simultaneously emit radio signals. These hypothesized black holes were about the mass of Mount Everest, and smaller than an atom. Soon after, the physicist and engineer John O'Sullivan tried to find these signals.
If these small black holes were evaporating, they would emit radio signals as they vanished. But because of their great distance from us, these signals would be hard to identify because they would be tiny by the time they arrived, as well being buried in a background of louder 'noise'. Furthermore, this tiny signal would be 'smeared' (turned from a sharp spike into a rounded shape). So he and his colleagues came up with a wonderful mathematical tool to detect these tiny, smeared signals.
As it turned out, they never did find these small black holes.
In 1992, John O'Sullivan was at Commonwealth Scientific and Industrial Research Organization (CSIRO) in Australia, trying to develop computer networks that communicated without wires.
But there was a big problem. The signals he wanted to detect were tiny, smeared and buried in a background of louder 'noise'. Just like the black hole signals.
By a wonderful coincidence, his black hole mathematics turned out to be the key to Wi-Fi. CSIRO took out patents in Australia in 1992, and in the US in 1996. By 2000, they had some working chips.
Improve your NAS environment in One Day! Introducing IBM Spectrum NAS
IBM has been in the NAS storage business for decades. IBM Spectrum NAS is our most recent software defined storage. This session gave an overview on how Spectrum NAS is designed. This software can be deployed on as few as four nodes in less than an hour, leaving you the rest of the day to migrate your data from other NAS solutions.
IBM Spectrum NAS fills the gap between a single file server and expensive dual-controller models available commercially. A single file server, running perhaps Windows Storage Server or Linux with NFS and Samba, represents a single point of failure (SPOF). Lose the one server, and your department or team loses access to all of those shared files!
At the other extreme, commercial dual-controller NAS devices, such as those from NetApp or DellEMC, are loaded with advanced features and application-specific capabilities. Some people take advantage of these, others don't.
IBM Spectrum NAS is software defined storage that runs on four or more nodes, is highly available, and provides many of the advanced features offered by commercial dual-controller models at roughly half the total cost of ownership.
Dip your TOE in our Pool! iSER and Data Reduction with IBM Spectrum Virtualize
All of the presenters at this conference were asked to come up with fun and quirky titles for their sessions. The title is a bit of wordplay.
When IBM launched its SAN Volume Controller in 2003, I was one of the "Technical Evangelists" that traveled around the world to explain how it works. Today, 15 years later, I am still talking about how great this technology is.
Ethernet network interface cards that have co-processors to offload some of the TCP/IP processing are called TCP-Offload-Engines, or "TOE" cards.
IBM recently announced two new flavors of 25GbE cards, one that supports RDMA over Converged Ethernet (RoCE), and another that supports Internet Wide Area RDMA protocol (iWARP).
To implement data deduplication, the Spectrum Virtualize team refactored the code that handled pools of managed space. The original pools are now referred to as "Legacy Storage Pools", and the new pools are referred to as "Data Reduction Pools".
Fahima Zair, Tony Pearson, and Maria Lancaster
After the sessions, we had a nice evening reception to celebrate the General Availability of the IBM FlashSystem 9100. At events like these, many attendees are local and commute to the event, so I was happy to see many stuck around to have conversations with the experts.
I was able to reconnect with many of my colleagues, including Fahima Zair in charge of our VersaStack relationship with Cisco, and Maria Lancaster from our Storage Marketing team.
Well, it's Tuesday again, and you know what that means? IBM Announcements! This week I am in San Francisco, California speaking to clients. A bit colder than Tucson, Arizona!
(FTC Disclosure: I work for IBM. Special thanks to Mark Larson (IBM SAN team), and both Craig Nelson and Peter Schmelter from Broadcom, for their assistance with this post. I have no personal financial interest in Broadcom. This blog post can be considered a "paid celebrity endorsement" of the IBM products mentioned below.)
Spectrum Control v5.3
Back in 2003, I was the chief architect of Spectrum Control v1, formerly called TotalStorage Productivity Center, and later Tivoli Storage Productivity Center. IBM Spectrum Control is part of the IBM Spectrum Storage Suite.
There are two editions: Standard Edition and Advanced Edition.
(What happened to the other editions? The "Base Edition" is now called IBM Spectrum Connect. The "Spectrum Control Storage Insights" service in the IBM Cloud is now just called IBM Storage Insights and Storage Insights Pro.)
The Standard Edition v5.3 offers the following:
Capacity visualization and management, Performance troubleshooting, Health and performance alerting, Application modeling, and support for VMware data sources
Create, save, and send reports directly in the web UI. The reports can be run now, or scheduled to be run later. When a report is run, it can be sent by email or exported and saved in different file types.
Support IBM FlashSystem 900 AE3 models using compression, and the new IBM FlashSystem 9100
Improved automation of counting the licenses for enclosure-based storage devices
The latest IBM Copy Services Manager (CSM) v6.2 for managing remote mirroring, replacing the previous IBM Tivoli Storage Productivity Center for Replication.
The Advanced Edition v5.3 provides all of the above, as well as the following.
Tiered storage optimization with intelligent analytics
Service catalog with policy-based provisioning
Self-service provisioning with restricted use logins
Analysis of reclaimable space
Showback and Chargeback reports
Application-based snapshot management using IBM Spectrum Protect Snapshot (formerly known as IBM FlashCopy Manager, FCM)
Clients with v5.2.x version of IBM Spectrum Control can upgrade to this new release.
Clients with IBM Spectrum Virtualize-based appliances can bundle Spectrum Control v5.3 with the latest Spectrum Virtualize v8 code. This bundle is referred to as "IBM Virtual Storage Center", or VSC for short. VSC supports SAN Volume Controller, FlashSystem 9100 and V9000, Storwize V7000 and V5000 models.
IBM's announcement of NVMe-capable FlashSystem 9100 has caused many to re-evaluate their SAN infrastructure. All IBM b-type Gen5 and Gen6 switches and directors are NVMe-ready!
(Last year, Broadcom completed its acquisition of Brocade. I am thankful both start with the letter "B", so we won't have to rename our B-type switches to another letter!)
There are two new products in this announcement. The SAN 128B-6 is a Gen6 switch in a 2U container. The other is a 64-port Blade that fits into existing Gen6 Directors, like the 256B-6 or 512B-6 models.
But the 128B-6 doesn't have 128 standard ports ! It actually has 96 standard ports, plus eight "Q-Flex" ports (that can be used to create a total of 128 ports) . Likewise, the 64-port blades have 16 Q-Flex ports (that can be used to create 64 ports).
What is going on? The Q-Flex ports can actually run four channels in different colors of light over the same fiber optic cable, reducing the wiring mess. These Q-Flex can be used for host or device traffic, but are often used as "Inter-Switch Links" or ISL for short.
All of the standard and Q-Flex ports are 32Gbps, but can are capable of autosensing 4, 8, 16, and 32 Gbps port speedsm depending on the SFPs used , for interoperability with existing servers and storage devices. In the case of Q-Flex, all four colors must be run at the same speed, so a Q-Flex represents either 4x32, 4x16, 4x8 or 4x4 Gbps links. You cannot mix different speeds on a single Q-Flex.
In addition, the 64-port blade also supports 10 GbE, 25 GbE, and 40 GbE using the appropriate QSFP transceivers.
I travel a lot. In the first six months of this year, I was on the road 17 of the 26 weeks. This week, I am visiting clients in beautiful Minneapolis, MN.
Several readers have asked me what mobile phone or web apps I find the most useful, and here are my top three. For each, I will explain how I use them, and why they are useful.
(FTC Disclosure: I work for IBM, and have no financial connections to any of the companies mentioned below, and have not been compensated in any way to mention them on this post. IBM has selected Concur as its travel platform, which runs TripIt mentioned below. This blog post can be considered a "paid celebrity endorsement" for each of the three sites below.)
[Rome2Rio] is one I use long before I plan my trip, and works both on my mobile phone as well as web application. Many people use apps like "Google Maps" for driving directions from point A to point B. But Rome2Rio handles airlines, trains and other alternative modes of transportation. It also provides estimated prices for each mode of transportation.
Landing in Gatwick Airport, I used Rome2Rio to figure out the most cost-effective way to get to my hotel on Southampton Row. A taxi would have been $160-200, Ride-share like Uber or Lyft $75-95, and train $17-28. I chose the train and saved a lot of money!
Rome2Rio is a great app, both for advanced planning, as well as dealing with situations in the moment. I have it bookmarked on my browser, and the app installed on my phone.
Long before IBM signed on Concur as its travel expense and trip planning tool, I was using [TripIt]. It automatically enters all of my airfare, hotel and car rental reservations into a single chronological itinerary, but then lets me add everything in between, such as meetings, dinner restaurant plans, and other activities.
While I am planning my travels, TripIt ensures I have all the connections I need. If I land at this airport, do I have a rental car or other transportation to the hotel? This forces me to get in advance all of the times and locations of every client dinner, briefing, or other meeting, so that I can plan how to get from point A, to B, to C, accordingly.
A few days before my trip, I can print out my TripIt itinerary, to PDF format file to send to my family and co-workers.
While traveling, I have the TripIt app to have all the information I need close at hand, including hotel address locations, or confirmation numbers once I arrive to the hotel.
[FlightStats] will show you the status of all flights, on any airline. Just enter the 2-character airline code, like AA for American Airlines, or DL for Delta Airlines, then the flight number. Here are the different ways I find this useful:
When I land at an airport connection, but have not yet left the plane, I can use FlightStats to determine which gate I have arrived at, and which gate I need for my next flight. This will give me a good sense of how much time I have, do I need to hurry, can I stop for a snack, and so on.
FlightStats seems to be more up-to-date than computer screens at the airport. I have learned of flight delays from FlightStats sooner than I have from the computer screens or gate agents.
If my flight is canceled or delayed, FlightStats also can find flights from point A to B using real-time information.
Are there any apps or web sites you recommend? Please comment below!
Mark your calendars! IBM plans to have back-to-back Technical University events in Hollywood, Florida:
October 8-12, will focus on IBM Z mainframe, and a subset of IBM Storage that offer synergy for IBM Z, such as DS8880 storage system, and the TS7760 Virtual Tape Engine.
October 15-19, will focus on IBM Power Systems and the entire IBM Storage portfolio.
When I first learned of this, I was not aware there was a city called Hollywood in Florida. The Hollywood in Florida is situated between Fort Lauderdale and Miami, so you can fly into either of those two airports to get to the conference.
(Did you know? The Hollywood most people know in California is no longer its own city, but rather incorporated as a neighborhood district into Los Angeles back in 1910. There are actually thirty different places called "Hollywood" around the world, two dozen in the United States, with the rest scattered in Ireland, Turkey, Russia, Singapore and the Philippines. Not all of these are formally "cities", but in some cases neighborhoods, districts, unincorporated areas, or other populated places. The Hollywood in Maryland claims to be the first, established in 1867!)
I only plan to attend the second week only, October 15-19. Here are some highlights:
In the past, IBM had keynote sessions for each brand, for example, one focused on IBM Power systems, and another on IBM Storage. However, these were scheduled during the same time slot, forcing some people to make a tough choice.
To solve this, the two keynote sessions will be staggered, so attendees can attend both!
The storage keynote will take on a new format, with a panel of experts. I have been invited as one of the experts to participate! If there is a particular topic you want to hear about on the panel, please enter your comments below.
As with most conferences, there is a "Call for Papers" requesting speakers submit the topics they can present, and then conference coordinators accept, adjust or reject them in building the final agenda.
Here are the topics I submitted:
Build your personal brand! Social Media tips from an experienced blogger
The Pendulum Swings Back - Understanding Converged and Hyperconverged Systems
IBM Hybrid and Multi-Cloud storage solutions
IBM Cloud Object Storage (powered by Cleversafe)
Managing Risks with Data Footprint Reduction
Information Lifecycle Management: Why Archive is different than Backup
The Seven Tiers of Business Continuity and Disaster Recovery
If you attended the IBM Technical Universtiy in Orlando last May, the conference in October will have six months' worth of new announcements and products to cover.
I also plan to be at the IBM Technical University events in Johannesburg, South Africa (September 11-13), and Rome, Italy (October 22-26). If you plan to be at any of these events, let me know! If not, you can follow along with Twitter hashtag: #IBMtechU
Several readers have asked me what is the difference between Hybrid Cloud and Multi-Cloud. The two phrases are used in various contexts, not just by IBM, but also by our competitors, as well as the press and industry analysts.
A hybrid cloud attempts to develop a single platform to run a specific Cloud workload. This single platform combines two or more of the following resources:
on-premise private Cloud
off-premise private Cloud
off-premise public Cloud
A Hybrid Cloud is like the United Nations peacekeeping force. A single force, with a single mission, representing the combined resources of many countries.
A Hybrid Cloud is a deployment model that might offer advantages over just using a Private Cloud, or just using a Public Cloud.
A practical example is Tennis Australia. For three weeks every January, they run the Australian Open, a tennis tournament, with over 4,000 employees, and millions of views to their website each day. For the rest of the year, they have only about 300 employees, and manage quite well to run smaller tournaments for high-school and college students, as well as plan for next year's event.
In this case, a Hybrid Cloud that combines perhaps two racks of an on-premise private Cloud, combined with the incredible power of IBM Cloud, gives them the variability and agility needed to run smoothly without wasting CAPEX on equipment they don't need.
Many "Hybrid Cloud" products focus on being the "glue" that combines two different resources together. This can be at the management layer, the data layer, the application layer, or the infrastructure layer.
In contrast, a Multi-Cloud represents a deployment strategy for different Cloud workloads. One workload might be better served on a Private Cloud, another workload might be better served on a Public Cloud, and a third workload, as we saw above, might benefit from the combined resources of a Hybrid Cloud.
In the past, people felt that all Cloud Service Providers were the same. Just as people buy gasoline from which ever gas station offers the lowest prices, many just chose their Cloud Service Provider based entirely on the costs involved. Loyalty can change the minute new price tables are published.
But today, Cloud Service Providers have made an effort to provide differentiation. For example, your Multi-Cloud might have three Hybrid Clouds. One cloud platform combines your on-premise Private Cloud with IBM Cloud, another combines your on-premise Private Cloud with Amazon Web Services, and a third combines your on-premise Cloud with Microsoft Azure.
In this case, a Multi-Cloud is like the various armed forces. You might deploy the Army for one mission, the Navy for another, and the Air Force or Marines for a third.
Many "Multi-Cloud" products focus on being versatile and multi-purpose. For example, the same FlashSystem 9100 that you deploy in your "Analytics Cloud" platform could also be useful for your "Docker Container Cloud" platform, or your "DevOPS Cloud" platform. IBM's various Multi-Cloud Solutions provide the additional software and services needed to complement the FlashSystem 9100 to pull this off.
Deciding to use a Multi-Cloud strategy is mostly a business decision. Deploying a Hybrid Cloud as one of your Multi-Cloud platforms could be a combination of business and technical decision.
Demonstrate that IBM technologies in areas like Artificial Intelligence (AI), Blockchain, Cloud, and the Internet of Things (IoT) are relevant in solving the world's biggest challenges
Encourage developers to contribute their time and talent to open source projects that benefit the greater good
Generate fresh ideas on how to tackle age-old problems that plague society
Each year will have a different focus. This year, the focus is in preventing, responding to and recovering from natural disasters, especially important with 2017 ranked as one of the worst years on record for catastrophic events, including fires, floods, earthquakes and storms.
Call for Code invites developers to create new applications to help communities and people better prepare for natural disasters. For example, developers may create an app that uses weather data and supply chain information to alert pharmacies to increase supplies of medicine, bottled water and other items based on predicted weather-related disruption. Or it could be an app that predicts when and where the disaster will be most severe, so emergency crews can be dispatched ahead of time in proper numbers to treat those in need.
Can't think of any ideas for an app? Here are some TED videos that might inspire you:
IBM's $30 million USD investment over five years will fund access to developer tools, technologies, free code and training with experts. To raise awareness and interest in Call for Code, IBM is coordinating interactive educational events, hackathons and community support for developers around the world in more than 50 cities, including Amsterdam, Bengaluru, Berlin, Delhi, Dubai, London, New York, San Francisco, Sao Paulo and Tel Aviv.
(My earliest memory of using a contest for fresh ideas was back in 1975, after the city of Tucson purchased the Tucson Rapid Transit Company. Rather than hiring an expensive marketing agency to run focus groups or surveys, the City of Tucson published in the local newspaper a "Name that Bus" contest. The winning entry was [Sun Tran], submitted by 25-year-old college student [Benjamin Rios]. He won the grand prize: $150 portable television!)
The winning Call for Cloud team will receive a financial prize and access to long-term support to help move their idea from prototype to real-world application.
Developers can register today at the [Callforcode.org] website. Projects can be submitted by individuals – or teams of up to five people – between June 18, 2018 and August 31, 2018. If you would like me on your team, as an honorary member, technical adviser or mentor, please let me know!
Thirty semi-finalists will be selected in September. A prominent jury, including some of the most iconic technologists in the world, will choose the winning solution from three finalists. The winner will be announced in October 2018 during a live-streamed concert and award event coordinated by David Clark Cause.
Additional details, a full schedule of in-person and virtual events, and training and enablement for Call for Code are available at [www.developer.ibm.com/callforcode] website.
This month, IBM Tucson Development Lab is celebrating 40 year anniversary! IBM has been operating in Arizona for the past 70 years, and of course IBM has been in the storage business for the past 90 years if you consider "punched cards" as storage on paper.
This year also marks the 40 year anniversary of DFHSM, the first product I worked on when I started here back in 1986. DFHSM stands for the Data Facility Hierarchical Storage Manager, which effectively moves data between disk and tape storage.
IBM put up two banners to celebrate! The first was for IBM Enterprise Tape storage. My first question was "What are punched cards doing on a banner for magnetic tape?"
A bit of history will explain that the first tape storage was non-magnetic. Back in 1725, Basile Bouchon developed the control of a loom by punched holes in paper tape. These were used to create intricate patterns in woven cloth.
In the late 1880s, Herman Hollerith, a young technical whiz at the US Census Bureau, had an idea for a machine that could count and sort census results far faster than human clerks. The bureau funded Hollerith’s work, and the [first tabulating machines] helped count the 1890 census, saving the bureau several years’ work and more than US$5 million.
Hollerith left the bureau to form the Tabulating Machine Company, selling his system to other countries’ census offices and then to businesses such as railroads and retailers. Hollerith had little competition, and his machines and punched cards became the standard for the industry.
In 1911, financier Charles Flint bought the Tabulating Machine Company and merged it with the International Time Recording Company and the Computing Scale Company of America to form the Computing-Tabulating-Recording Company, or C-T-R, later renamed IBM in 1924.
In 1928, IBM introduced a new version of the punched card with rectangular holes and 80 columns. The 80-character standard was used from everything from the first computer screens, to the first file layouts
It wasn't until 1952 that the first magnetic tape system hit the scene: the IBM model 726. Tape reels were the size of pizzas, and were prominently shown spinning around in various Hollywood movies to represent computers "working" on a problem.
In my now infamous 2007 post [Hu Yoshida should know better], I explain the 3850 Mass Storage System (MSS). In 1974, The IBM 3850 MSS was one of the first hybrid disk-and-tape storage systems. It was an automated tape library pretending to be disk, with tape cartridges stored in hexagonal honeycomb shelves. The tape cartridges were cylindrical, about the size of a can of soda. The spool of 770 feet of tape media held just 5MB of data.
A full IBM 3850 MSS configuration with thousands of tape cartridges was used for the 1980 US Census, holding 102 GB database, representing the data collected about 226.5 million U.S. residents. That's about 450 bytes per resident, enough to fill six punched cards.
The second banner was for IBM Enterprise Disk storage.
IBM introduced the IT industry's first commercial disk system in 1956. While the banner says "RAMAC 305", that is the name of the server. The storage system was called the [350 Disk Storage Unit]. It was the size of two refrigerators and held 5 MB of data.
In the early 1990s, I visited a client in Germany that had a 3990 controller with two 3390 disk systems attached, holding 90 GB of data in the size of three refrigerators. They had five storage administrators to manage this configuration.
A few years later at another client, they had roughly 7000 GB (7 TB) of data on their mainframe, and an equal amount across all of their Windows and UNIX servers. I met with their storage administrators, there were two for the mainframe, and about three dozen for the distributed servers.
I had two questions for them. First, why were there two storage admins for the mainframe? The mature policy-based automation on the platform would mean only one person required. Their response: when one of us is on a two-week vacation, the other can handle the workload.
My second question was for the remaining storage admins: When was the last time any of you took a two-week vacation? None had, of course, since the storage administration tools back then meant they were all working overtime on various tedious and manual tasks!
In February 2006, the folks in IBM Germany asked the IBM Storage Marketing team what events or celebration were planned for September 13, 2016, the 50 year anniversary of disk. My marketing colleagues responded, "that is only seven months away, you didn't give us enough lead time notice to plan!"