This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
Well, it's Tuesday, which means IBM Announcements!
We have both disk and tape related announcements today.
2 TB Drives
Yes, they are finally here. IBM now offers [2 TB SATA drives for its IBM System Storage DCS9900 series] disk systems. These are 5400 RPM, slower than traditional 7200 RPM SATA drives. This increases the maximum capacity of a single DCS9900 from 1200 TB to 2400 TB. The DCS9900 is IBM's MAID system (Massive Array of Idle Disk) which allows for drive spin-down to reduce energy costs and is ideal for long term retention of archive data that must remain on disk for High Performance Computing or video streaming.
TS3000 System Console
The TS3000 System Console [provides improved features for service and support] of up to 24 tape library frames or 43 unique tape systems. Tape frames include those of the TS7740, TS7720 and TS7650. Tape systems include TS3500, TS3400 or 3494 libraries as well as stand-alone TS1120 and TS1130 drives. Having the TS3000 System Console in place is a benefit to both IBM and the customer, as it improves IBM's ability to provide service in a more timely manner.
Both announcements are part of IBM's strategy to provide cost-effective, energy-efficient, long-term retention storage for archive data.
I saw this as an opportunity to promote the new IBM Tivoli Storage Manager v6.1 which offers a variety of new scalability features, and continues to provide excellent economies of scale for large deployments, in my post [IBM has scalable backup solutions].
"So does TSM scale? Sure! Just add more servers. But this is not an economy of scale. Nothing gets less expensive as the capacity grows. You get a more or less linear growth of costs that is directly correlated to the growth of primary storage capacity. (Technically, it costs will jump at regular and predictable intervals, by regular and predictable and equal amounts, as you add TSM servers to the infrastructure--but on average it is a direct linear growth. Assuming you are right sized right now, if you were to double your primary storage capacity, you would double the size of the TSM infrastructure, and double your associated costs.)"
I talked about inaccurate vendor FUD in my post [The murals in restaurants], and recently, I saw StorageBod's piece, [FUDdy Waters]. So what would "economies of scale" look like? Using Scott's own words:
Without Economies of Scale
"If it costs you $5 to backup a given amount of data, it probably costs you $50 to back up 10 times that amount of data, and $500 to back up 100 times that amount of data."
With Economies of Scalee
"If anybody can figure out how to get costs down to $40 for 10 times the amount of data, and $300 for 100 times the amount of data, they will have an irrefutable advantage over anybody that has not been able to leverage economies of scale."
So, let's do some simple examples. I'll focus on a backup solution just for employee workstations, each employee has 100GB of personal data to backup on their laptop or PC. We'll look at a one-person company, a ten-person company, and a hundred-person company.
Case 1: The one-person company
Here the sole owner needs a backup solution. Here are all the steps she might perform:
Spend hours of time evaluating different backup products available, and make sure her operating system, file system and applications are supported
Spend hours shopping for external media, this could be an external USB disk drive, optical DVD drive, or tape drive, and confirm it is supported by the selected backup software.
Purchase the backup software, external drive, and if optical or tape, blank media cartridges.
Spend time learning the product, purchase "Backup for Dummies" or similar book, and/or taking a training class.
Install and configure the software
Operate the software, or set it up to run automatically, and take the media offsite at the end of the day, and back each morning
Case 2: The ten-person company
I guess if each of the ten employees went off and performed all of the same steps as above, there would be no economies of scale.
Fortunately, co-workers are amazingly efficient in avoiding unnecessary work.
Rather than have all ten people evaluate backup solutions, have one person do it. If everyone runs the same or similar operating system, file systems and applications, this can be done about the same as the one-person case.
Ditto on the storage media. Why should 10 people go off and evaluate their own storage media. One person can do it for all ten people in about the same time as it takes for one person.
Purchasing the software and hardware. Ok, here is where some costs may be linear, depending on your choices. Some software vendors give bulk discounts, so purchasing 10 seats of the same software could be less than 10 times the cost of one license. As for storage hardware, it might be possible to share drives and even media. Perhaps one or two storage systems can be shared by the entire team.
For a lot of backup software, most of the work is in the initial set up, then it runs automatically afterwards. That is the case for TSM. You create a "dsm.opt" file, and it can list all of the include/exclude files and other rules and policies. Once the first person sets this up, they share it with their co-workers.
Hopefully, if storage hardware was consolidated, such that you have fewer drives than people, you can probably have fewer people responsible for operations. For example, let's have the first five employees sharing one drive managed by Joe, and the second five employees sharing a second drive managed by Sally. Only two people need to spend time taking media offsite, bringing it back and so on.
Case 3: The hundred-person company
Again, it is possible that a hundred-person company consists of 10 departments of 10 people each, and they all follow the above approach independently, resulting in no economies of scale. But again, that is not likely.
Here one or a few people can invest time to evaluate backup solutions. Certainly far less than 100 times the effort for a one-person company.
Same with storage media. With 100 employees, you can now invest in a tape library with robotic automation.
Purchase of software and hardware. Again, discounts will probably apply for large deployments. Purchasing 1 tape library for all one hundred people is less than 10 times the cost and effort of 10 departments all making independent purchases.
With a hundred employees, you may have some differences in operating system, file systems and applications. Still, this might mean two to five versions of dsm.opt, and not 10 or 100 independent configurations.
Operations is where the big savings happen. TSM has "progressive incremental backup" so it only backs up changed data. Other backup schemes involve taking period full backups which tie up the network and consume a lot of back end resources. In head-to-head comparisons between IBM Tivoli Storage Manager and Symantec's NetBackup, IBM TSM was shown to use significantly less network LAN bandwidth, less disk storage capacity, and fewer tape cartridges than NetBackup.
The savings are even greater with data deduplication. Either using hardware, like IBM TS76750 ProtecTIER data deduplication solution, or software like the data deduplication capability built-in with IBM TSM v6.1, you can take advantage of the fact that 100 employees might have a lot of common data between them.
So, I have demonstrated how savings through economies of scale are achieved using IBM Tivoli Storage Manager. Adding one more person in each case is cheaper than the first person. The situation is not linear as Scott suggests. But what about larger deployments? IBM TS3500 Tape Library can hold one PB of data in only 10 square feet of data center floorspace. The IBM TS7650G gateway can manage up to 1 PB of disk, holding as much as 25 PB of backup copies. IT Analysts Tony Palmer, Brian Garrett and Lauren Whitehouse from Enterprise Strategy Group tried IBM TSM v6.1 out for themselves and wrote up a ["Lab Validation"] report. Here is an excerpt:
"Backup/recovery software that embeds data reduction technology can address all three of these factors handily. IBM TSM 6.1 now has native deduplication capabilities built into its Extended Edition (EE) as a no-cost option. After data is written to the primary disk pool, a deduplication operation can be scheduled to eliminate redundancy at the sub-file level. Data deduplication, as its name implies, identifies and eliminates redundant data.
TSM 6.1 also includes features that optimize TSM scalability and manageability to meet increasingly demanding service levels resulting from relentless data growth. The move from a proprietary back-end database to IBM DB2 improves scalability, availability, and performance without adding complexity; the DB2 database is automatically maintained and managed by TSM. IBM upgraded the monitoring and reporting capabilities to near real-time and completely redesigned the dashboard that provides visibility into the system. TSM and TSM EE include these enhanced monitoring and reporting capabilities at no cost."
The majority of Fortune 1000 customers use IBM Tivoli Storage Manager, and it is the backup software that IBM uses itself in its own huge data centers, including the cloud computing facilities. In combination with IBM Tivoli FastBack for remote office/branch office (ROBO) situations, and complemented with point-in-time and disk mirroring hardware capabilities such as IBM FlashCopy, Metro Mirror, and Global Mirror, IBM Tivoli Storage Manager can be an effective, scalable part of a complete Unified Recovery Management solution.
This week, some of my coworkers are out at
[VMworld 2009] in San Francisco. IBM is a platinum sponsor, and is the leading reseller of VMware software. Here is the floor plan for our IBM booth there:
Virtual Data Center in a Box & Virtual Networking on
IBM & VMware Joint Collaboration on Power Monitoring
“Always on IT” Business Continuity Solution
IBM System Storage™ XIV®
[IBM XIV Storage System] is a revolutionary, easily managed, open disk system, designed to meet today’s ongoing IT challenges. This system now supports VMware 4.0 and extends the benefits of virtualization to your storage system, enabling easy provisioning and self-tuning after hardware changes. Its unique grid-based architecture represents the next generation of high-end storage and delivers outstanding performance, scalability, reliability and features, along with management simplicity and exceptional TCO.
IBM Storage Solutions with VMware
Featured products include: The new IBM System Storage DS5020 , Virtual Disk solutions with IBM System Storage SAN Volume Controller, IBM Tivoli Storage Productivity Center, and IBM System Storage ProtecTIER Data Deduplication solutions.
Server virtualization with VMware vSphere offers significant benefits to an organization, including increased asset utilization, simplified management and faster server provisioning. In addition to these benefits, VMware enables business agility and business continuity with more advanced features such as VMotion, high availability, fault tolerance, and Site Recovery Manager that all require dependable high-performance shared storage. Adding storage solutions --including virtualized storage-- from IBM delivers complementary benefits to your information infrastructure that extend and enhance the benefits of VMware vSphere while increasing overall reliability, availability and performance to help you transform into a dynamic infrastructure. IBM can provide the right storage solution for your environment and requirements. Our solutions help maximize efficiency with lower costs and provide affordable, scalable storage solutions that help you solve your particular needs.
Stop by to learn how our the exciting new storage solutions can help optimize VMware including self-encrypting storage, automated, affordable disaster recovery with VMware SRM easier and faster provisioning of storage for virtual machines, dramatically improved storage utilization with ProtecTIER deduplication, and how the DS5000 has lower costs Total Cost of Acquisition (TCA) than typical competitors.
IBM Smart Business Desktop Cloud
IBM System x® iDataPlex™: Get More on the Floor
Virtual Client Solutions from IBM
IBM also is sponsoring some breakout sessions:
Leverage Storage Solutions for a Smarter Infrastructure
Simplify and Optimize with IBM N series
IBM SAN Volume Controller: Virtualized Storage for Virtual Servers
XIV: Storage Reinvented for today's dynamic world
Wish I was there, looks like a lot of good information!
This week, SHARE conference is being held at the Colorado Convention Center in Denver, Colorado. I covered this conference for 10 years earlier in my career. Now, my colleague Curtis Neal covers these on a regular basis, and is giving the following presentations this week:
IBM Virtual Tape Products: DILIGENT ProtecTIER and TS7700 Update
Wednesday (1:30-2:30pm), Curtis will present IBM's premier virtual tape libraries. The TS7650G ProtecTIER Data Deduplication solution supports distributed systems like Windows, UNIX and Windows. The TS7700 supports the IBM System z mainframe.
SAN Volume Controller Update
Thursday (8:00-9:00am), Curtis will cover the latest features of the IBM System Storage SAN Volume Controller (SVC). SVC has features like thin provisioning, vDisk mirroring, and cascaded FlashCopy support.
IBM System Storage DS5000 Update
Friday (8:00-9:00am), Curtis will cover the DS5100 and DS5300, and probably the new DS5020 model. These are midrange disk systems that provide excellent performance for distributed systems, full disk encryption, and intermix of FC and SATA drives.
Unlike other conferences where people just go once and are never seen again, SHARE brings back the same people back year after year, so that you can maintain relationships across organizations, and can carry on forward-looking strategic discussions.
Well, it's Tuesday again, and that means IBM announcements!
We've got a variety of storage-related items today, so here's my quick recap:
DS5020 and EXP520 disk systems
[IBM System Storage DS5020]
provides the functional replacement for DS4700 disk systems. These are combined controller
and 16 drives in a compact 3U package.
The EXP520 expansion drawer provides additional 16 drives per 3U drawer. A DS5020 can
support upo to six additional EXP520, for a total of 112 drives per system.
The DS5020 supports both 8 Gbps FC as well as 1GbE iSCSI.
New Remote Support Manager (DS-RSM model RS2)
The [IBM System Storage DS-RSM Model
RS2] supports of up to 50 disk systems, any mix of DS3000, DS4000 and DS5000 series.
It includes "call home" support, which is really "email home", sending error alerts to IBM
if there are any problems. The RSM also allows IBM to dial-in to perform diagnostics before
arrival, reducing the time needed to resolve a problem. The model RS2 is a beefier model
with more processing power than the prior generation RS1.
New Ethernet Switches
With the increased interest in iSCSI protocol, and the new upcoming Fibre Channel over
Convergence Enhanced Ethernet (FCoCEE), IBM's re-entrance into the ethernet switch market
has drawn a lot of interest.
The [IBM Ethernet Switch r-
series] offers 4-slot, 8-slot, 16-slot, and 32-slot models. Each slot can handle either
16 10GbE ports, or 48 1GbE ports. This means up to 1,536 ports.
The [c-series] now offers a
24-port model. This is either 24 copper and 4 fiber optic, or 24 fiber optic.
The "hybrid fiber" SFP fiber optic can handle either single or multi-mode, eliminating the
need to commit to one or the other, providing greater data center flexibility.
The [IBM Ethernet Switch B24X]
offers 24 fiber optic (that can handle 10GbE or 1GbE) and 4 copper (10/100/1000 MbE RJ45)
Storage Optimization and Integration Services
[IBM Storage Optimization and
Integration Services] are available. IBM service consultants use IBM's own
Storage Enterprise Resource Planner (SERP) software to evaluate your environment and provide
recommendations on how to improve your information infrastructure. This can be especially
helpful if you are looking at deploying server virtualization like VMware or Hyper-V.
As people look towards deploying a dynamic infrastructure, these new offerings can be a
Eventually, there comes a time to drop support for older, outdated programs that don't meet the latest standards. I had several complain that they could not read my last post on Internet Explorer 6. The post reads fine on more modern browsers like Firefox 3 and even Google's Chrome browser, but not IE6.
Google confirms that warnings are appearing:
[Official: YouTube to stop IE6 support].
My choice is to either stop embedding YouTube videos, some of which are created by my own marketing team specifically on my behalf, or drop support for IE6. I choose the latter. If you are still using IE6, please consider switching to Firefox 3 or Google Chrome instead.
Over on his Backup Blog, fellow blogger Scott Waterhouse from EMC has a post titled
[Backup Sucks: Reason #38]. Here is an excerpt:
Unfortunately, we have not been able to successfully leverage economies of scale in the world of backup and recovery. If it costs you $5 to backup a given amount of data, it probably costs you $50 to back up 10 times that amount of data, and $500 to back up 100 times that amount of data.
If anybody can figure out how to get costs down to $40 for 10 times the amount of data, and $300 for 100 times the amount of data, they will have an irrefutable advantage over anybody that has not been able to leverage economies of scale.
I suspect that where Scott mentions we in the above excerpt, he is referring to EMC in general, with products like
Legato. Fortunately, IBM has scalable backup solutions, using either a hardware approach, or one purely with software.
The hardware approach involves using deduplication hardware technology as the storage pool for IBM Tivoli Storage Manager (TSM). Using this approach, IBM Tivoli Storage Manager would receive data from dozens, hundreds or even thousands
of client nodes, and the backup copies would be sent to an IBM TS7650 ProtecTIER data deduplication appliance, IBM TS7650G gateway, or IBM N series with A-SIS. In most cases, companies have standardized on the operating systems and applications used on these nodes, and multiple copies of data reside across employee laptops. As a result, as you have more nodes backing up, you are able to achieve benefits of scale.
Perhaps your budget isn't big enough to handle new hardware purchases at this time, in this economy. Have no fear,
IBM also offers deduplication built right into the IBM Tivoli Storage Manager v6 software itself. You can use sequential access disk storage pool for this. TSM scans and identifies duplicate chunks of data in the backup copies, and also archive and HSM data, and reclaims the space when found.
If your company is using a backup software product that doesn't scale well, perhaps now is a good time to switch over to IBM Tivoli Storage Manager. TSM is perhaps the most scalable backup software product in the marketplace, giving IBM an "irrefutable advantage" over the competition.
This week, I was in the Phoenix area presenting at TechData's TechSelect University. TechData is one of IBM's IT distributors,
and TechSelect is their community of 440 resellers and 20 vendors. This year they celebrate their 10 year anniversary of this event. I covered three particular topics, and I was videotaped for those who were not able to attend my session. (There were very few empty seats at my sessions)
IBM Business Partners now realize that the "killer app" for storage is combining the IBM System Storage SAN Volume Controller with entry-level or midrange disk storage systems for an awesome solution. Solutions based on either the Entry Edition or the standard hardware models can compete well with a variety of robust features, including thin provisioning, vDisk mirroring, FlashCopy, Metro and Global Mirror. This has the advantage that the SVC can extend these functions not just to newly purchased disk capacity, but also existing storage capacity. The newly purchased capacity can be DS3400, DS4700 or the new DS5000 models. This is great "investment protection" for small and medium sized businesses.
LTO-4 drives and automation
The Linear Tape Open (LTO) consortium--consisting of IBM, HP and Quantum--has proven wildly successful, ending the
vendor-lockin from SDLT tape. I presented the latest LTO-4 offerings, including the TS2240, TS2340, TS2900, TS3100
and TS3200. The LTO consortium has already worked out a technology roadmap for LTO-5 and LTO-6. The LTO-4 drives
support WORM cartridges and on-board hardware-based encryption. The encryption keys can be managed with IBM Tivoli Key Lifecycle Manager (TKLM).
SAN and FCoCEE switches
IBM has agreements with Brocade, Cisco and Juniper Networks for various networking gear. I focused on entry-level switches for SAN fabrics, the SAN24B-4 and Cisco 9124, as well as new equipment for Convergence Enhanced Ethernet (CEE),
including IBM's Converged Network Adapater (CNA) for System x servers, and the SAN32B switch that has 24 10GbE CEE ports and 8 FC ports that support 8/4/2 and 4/2/1 SFP transceivers. FCoE Clients that want to deploy Fibre Channel over CEE (FCoCEE) today have everything the need to get started.
The venue was the
[Sheraton Wild Horse Pass Resort and Spa] in Chandler, just south of Phoenix. This compound includes [Rawhide], an 1800's era Western Town attraction, a rodeo arena, and a casino still under construction.
Dinners were held nearby at the infamous
[Rustler's Rooste] Steakhouse on South mountain.
Continuing my week in Chicago, for the IBM Storage Symposium 2008, I attended two presentations on XIV.
XIV Storage - Best Practices
Izhar Sharon, IBM Technical Sales Specialist for XIV, presented best practices using XIV in various environments.He started out explaining the innovative XIV architecture: a SATA-based disk system from IBM can outperformFC-based disk systems from other vendors using massive parallelism. He used a sports analogy:
"The men's world record for running 800 meters was set in 1997 by Wilson Kipketer of Denmark in a time of 1:41.11.
However, if you have eight men running, 100 meters each, they will all cross the finish line in about 10 seconds."
Since XIV is already self-tuning, what kind of best practices are left to present? Izhar presented best practicesfor software, hosts, switches and storage virtualization products that attach to the XIV. Here's some quickpoints:
Use as many paths as possible.
IBM does not require you to purchase and install multipathing software as other competitors might. Instead, theXIV relies on multipathing capabilities inherent to each operating system.For multipathing preference, choose Round-Robin, which is now available onAIX and VMware vSphere 4.0, for example. Otherwise, fixed-path is preferred over most-recently-used (MRU).
Encourage parallel I/O requests.
XIV architecture does not subscribe to the outdated notion of a "global cache". Instead, the cache is distributed across the modules, to reduce performance bottlenecks. Each HBA on the XIV can handle about 1400requests. If you have fewer than 1400 hosts attached to the XIV, you can further increase parallel I/O requests by specifying a large queue depth in the host bus adapter (HBA).An HBA queue depth of 64 is a good start. Additional settings mightbe required in the BIOS, operating system or application for multiple threads and processes.
For sequential workloads, select host stripe size less than 1MB. For random, select host stripe size larger than 1MB. Set rr_min_io between ten(10) and the queue depth(typically 64), setting it to half of the queue depth is a good starting point.
If you have long-running batch jobs, consider breaking them up into smaller steps and run in parallel.
Define fewer, larger LUNs
Generally, you no longer need to define many small LUNs, a practice that was often required on traditionaldisk systems. This means that you can now define just 1 or 2 LUNs per application, and greatly simplifymanagement. If your application must have multiple LUNs in order to do multiple threads or concurrent I/O requests, then, by all means, define multiple LUNs.
Modern Data Base Management Systems (DBMS) like DB2 and Oracle already parallelize their I/O requests, sothere is no need for host-based striping across many logical volumes. XIV already stripes the data for you.If you use Oracle Automated Storage Management (ASM), use 8MB to 16MB extent sizes for optimal performance.
For those virtualizing XIV with SAN Volume Controller (SVC), define manage disks as 1632GB LUNs, in multiple of six LUNs per managed disk group (MDG), to balance across the six interface modules. Define SVC extent size to 1GB.
XIV is ideal for VMware. Create big LUNs for your VMFS that you can access via FCP or iSCSI.
Organize data to simplify Snapshots.
You no longer need to separate logs from databases for performance reasons. However, for some backup productslike IBM Tivoli Storage Manager (TSM) for Advanced Copy Services (ACS), you might want to keep them separatefor snapshot reasons. Gernally, putting all data for an application on one big LUNgreatly simplifies administration and snapshot processing, without losing performance.If you define multiple LUNs for an application, simply put them into the same "consistencygroup" so that they are all snapshot together.
OS boot image disks can be snapshot before applying any patches, updates or application software, so that ifthere are any problems, you can reboot to the previous image.
Employ sizing tools to plan for capacity and performance.
The SAP Quicksizer tool can be used for new SAP deployments, employing either the user-based orthroughput-based sizing model approach. The result is in mythical unit called "SAPS", which represents0.4 IOPS for ERP/OLTP workloads, and 0.6 IOPS for BI/BW and OLAP workloads.
If you already have SAP or other applications running, use actual I/O measurements. IBM Business Partners and field technical sales specialists have an updated version of Disk Magic that can help size XIV configurations fromPERFMON and iostat figures.
Lee La Frese, IBM STSM for Enteprise Storage Performance Engineering, presented internal lab test results forthe XIV under various workloads, based on the latest hardware/software levels [announced two weeks ago]. Three workloadswere tested:
Web 2.0 (80/20/40) - 80 percent READ, 20 percent WRITE, 40 percent cache hits for READ.YouTube, FlickR, and the growing list at [GoWeb20] are applications with heavy read activity, but because of[long-tail effects], may not be as cache friendly.
Social Networking (50/50/50) - 50 percent READ, 50 percent WRITE, 50 percent cache hits for READ.Lotus Connections, Microsoft Sharepoint, and many other [social networking] usage are more write intensive.
Database (70/30/50) - 70 percent READ, 30 percent WRITE, 50 percent cache hits for READ.The traditional workload characteristics for most business applications, especially databases like DB2 andOracle on Linux, UNIX and Windows servers.
The results were quite impressive. There was more than enough performance for tier 2 application workloads,and most tier 1 applications. The performance was nearly linear from the smallest 6-module to the largest 15-module configuration. Some key points:
A full 15-module XIV overwhelms a single SVC 8F4 node-pair. For a full XIV, consider 4 to 8 nodes 8F4 models, or 2 to 4 nodes of an 8G4. For read-intensive cache-friendly workloads, an SVC in front of XIV was able to deliver over 300,000 IOPS.
A single node TS7650G ProtecTIER can handle 6 to 9 XIV modules. Two nodes of TS7650G were needed to drivea full 15-module XIV. A single node TS7650 in front of XIV was able to ingest 680 MB/sec on the seventh day with17 percent per-day change rate test workload using 64 virtual drives. Reading the data back got over 950 MB/sec.
For SAP environments where response time 20-30 msec are acceptable, the 15-module XIV delivered over 60,000 IOPS. Reducing this down to 25,000-30,000 cut the msec response time to a faster 10-15 msec.
These were all done as internal lab tests. Your mileage may vary.
Not surprisingly, XIV was quite the popular topic here this week at the Storage Symposium. There were many moresessions, but these were the only two that I attended.
Continuing my week in Chicago, at the IBM System x and BladeCenter Technical Conference, I attended an
awesome session that summarized IBM's Linux directions. Pat Byers presented the global forces that are
forcing customers to re-evaluate the TCO of their operating system choices, the need for rapid integration
in an ever-changing business climate, government stimulus packages, and technology that has enabled much
better solutions than we had during the last economic turn-down in 2001-2003.
IBM has been committed to Linux for over 10 years now. I was part of the initial IBM team in the 1990s to work on Linux for the mainframe. In various roles, I helped get Linux attachment tested for disk and tape systems, and helped get Linux selected as an operating system platform of choice for our storage management software.
Today, Linux-based server generate $7 Billion US dollars in revenues. For UNIX customers, Linux provides greater flexibility for hardware platform. For Windows customers, Linux provides better security and reliability.
Initially, Linux was used for simple infrastructure applications, edge-of-the-network and Web-based workloads.
This evolved to Application and Data serving, Enterprise applications like ERP, CRM and SCM. Today,
Linux is well positioned to help IBM make our world a smarter planet, able to handle business-critical applications. It is the only operating system to scale to the full capability of the biggest IBM System x3950M2 server.
Pat gave an examples of IBM's work with Linux helping clients.
City of Stockholm
The city of Stockholm, Sweden introduced congestion pricing to reduce traffic.
IBM helped them deploy systems to collect tariffs from 300,000 vehicles a day, with real-time scanning and recognition of vehicle license plates, Web-accessible payment processing, and analytics for metrics and reporting. This configuration was able to
[reduce traffic by 25 percent in the first month].
IBM helped [ConAgra Foods] switch their SAP environment from a monolithic Solaris on SPARC deployment, to a more distributed one using Novell SUSE Linux on x86. The result? Six times faster performance at 75 percent lower total cost of ownership!
IBM's strategy has been to focus on working with two of the major Linux distributors: Red Hat and Novell. It also works with [Asianux] which is like the UnitedLinux for Asia, internationalized for Japan, Korea, and China. It handles special requests for other distributions, from CentOS to Ubuntu, as needed on a case by case basis.
IBM's Linux Technology Center of 600 employees help to enable IBM products for Linux, make Linux a better operating system, expand Linux's reach, and help drive collaboration and innovation. In fact, IBM is the #3 corporate contributor to the open source Linux kernel, behind Red Hat (#1) and Novell (#2). For most IBM products, IBM tests with Linux as rigorously as it does Microsoft Windows. IBM offers complete RTS/ServicePac and SupportLine service and support contracts for Red Hat and Novell Linux.
At the IBM Solutions Center this week, several booths used Linux bootable USB sticks to run their software.
[Novell SUSE Studio] was developed to help
customize Linux to the specific needs for independent vendors.
Both Red Hat and Novell offer distributions in four categories:
Standard - for small entry-level servers, with support for a few virtual guests
Advanced Platform - for bigger servers, and support for many or unlimited number of virtual guests
High Performance Computing - HPC and Analytics for large grid deployments
Real Time - for real time processing, such as with
[IBM WebSphere Real Time], where
sub-second response time is critical.
A key difference between Red Hat and Novell appears to be on their strategy towards server virtualization.
Red Hat wants to position itself as the hypervisor of choice, for both servers and desk top virtualization, announcing Kernel-based Virtual Machine
[KVM] on their Red Hat Enterprise Linux (RHEL) 5.4 release, and their new upcoming
RHEV-V, a tight 128MB hypervisor to compete against VMware ESXi. Meanwhile, Novell is focusing SUSE to be
the perfect virtual guest OS, being hypervisor-aware an dhaving consistent terms and licensing when run under any hypervisor, including VMware, Hyper-V, Citrix Xen, KVM or others.
IBM has tons of solutions that are based on Linux, including the IBM Information Server blade, the InfoSphere Balanced Warehouse, SAN Volume Controller (SVC), TS7650 ProtecTIER data deduplication virtual tape library, Grid Medical Archive Solution (GMAS), Scale-out File Services (SoFS), Lotus Foundations, and the IBM Smart Cube.
If you are interested in trying out Linux, IBM offers evaluation copies at no charge for 30 to 90 days. For
more on how to deploy Linux successfully on IBM servers, see the
[IBM Linux Blueprints] landing page.
Continuing my week in Chicago, for the IBM Storage Symposium 2008, I attended several sessions intended to answer the questions of the audience.
In an effort to be cute, the System x team have a "Meet the xPerts" session at their System x and BladeCenter Technical Conference, so the storage side decided to do the same. Traditionally, these have been called "Birds of a Feature", "Q&A Panel", or "Free-for-All". They allow anyone to throw out a question, and have the experts in the room, either
IBM, Business Partner or another client, answer the question from their experience.
Meet the Experts - Storage for z/OS environments
Here were some of the questions answered:
I've seen terms like "z/OS", "zSeries" and "System z" used interchangeably, can you help clarify what this particular session is about?
IBM's current mainframe servers are all named "System z", such as our System z9 or System z10. These replace the older zSeries models of hardware. z/OS is one of the six operating systems that run on this hardware platform. The other five are z/VM, z/VSE, z/TPF, Linux and OpenSolaris. The focus of this session will be storage attached and used for z/OS specifically, including discussions of Omegamon and DFSMS software products.
What can we do to reduce our MIPS-based software licensing costs from our third party vendors?
Consider using IBM System z Integrated Information Processor
What about 8 Gbps FICON?
IBM has already announced
[FICON Express8] host bus adapter (HBA) cards, that will auto-negotiate to 4Gbps and 2Gbps speeds. If you don't need full 8Gbps speed now, you can
still get the Express8 cards, but put 4/2/1 Gbps SFP ports instead. Currently, LongWave (LW) is only supported to 4km at 8Gbps speed.
I want to use Global Mirror for my DS8100 to my remote DS8100, but also make test copies of my production data to
an older ESS 800 I have locally. Any suggestions? Yes, consider using FlashCopy to simplify this process.
I have Global Mirror (GM) running now successfully with DSCLI, and now want to deploy IBM Tivoli Storage Productivity Center for Replication. Is that possible? Yes, Productivity Center for Replication will detect existing GM relationships, and start managing them.
I have already deployed HyperPAV and zHPF, is there any value in getting Solid-State Drives as well?
HyperPAV and zHPF impact CONN time, but SSD impacts DISC time, so they are mutually complementary.
How should I size my FlashCopy SE pool? SE refers to "Space Efficient", which stores only the changes
between the source and destination copies of each LUN or CKD volume involved. General recommendation is to start with 20 percent and adjust accordingly.
How many RAID ranks should I configure per DS8000 extent pool? IBM recommends 4 to 8 ranks per pool.
Meet the Experts: Storage for Linux, UNIX and Windows distributed systems
This session was focused on storage systems attached to distributed servers, as well as products from Tivoli used to manage them. Here were some of the questions answered:
When we migrated from Tivoli Storage Manager v5 to v6, we lost our favorite "Operational Reporting" tool. How can we get TOR back? You now get the new Tivoli Common Reporting tool.
How can we identify appropriate port distribution for multiple SVC node pairs for load balancing?
IBM Tivoli Storage Productivity Center v4.1 has hot-spot analysis with recommendations for Vdisk migrations.
We tried TotalStorage Productivity Center way back when, but the frequent upgrades were killing us. How has it been lately? It has been much more stable since v3.3, and completely renamed to Tivoli Storage Productivity Center to avoid association with versions 1 and 2 of the predecessor product. The new "lightweight agents" feature of v4.1 resolve many of the problems you were experiencing.
We have over 1600 SVC virtual disks, how do we handle this in IBM Tivoli Storage Productivity Center? Use the Filter capability in combination with clever naming conventions for your virtual disks.
How can we be clever when we are limited to only 15 characters? Ok. We understand.
We are currently using an SSPC with Windows 2003 and 2GB memory, but we are only using the Productivity Center for Replication feature of it. Can we move the DB2 database over to a Windows 2008 server with 4GB of memory?
Consider using the IBM Tivoli Storage Productivity Center for Replication software instead of SSPC for special
circumstances like this.
We love the XIV GUI, how soon will all other IBM storage products have it also? As with every acquisition,
IBM evaluates if there are technologies from new products that can be carried back to existing products.
We are currently using 12 ports on our existing XIV, and love it so much we plan to buy a second frame, but are concerned about consuming another 12 ports on our SAN switch. Any suggestions? Yes, use only six ports per frame. Just because you have more ports, doesn't mean you are required to use them.
We have heard there are concerns from the legal community about using deduplication technology, any ideas how to address that?
Nobody here in the room is a lawyer, and you should consult legal counsel for any particular situation.
None of the IBM offerings intended for non-erasable, non-rewriteable (NENR) data retention records (DR550, WORM tape, N series SnapLock) support dedupe today, and none of IBM's deduplication offerings (TS7650,N series A-SIS,TSM) make any claims for fit-for-purpose for compliance regulatory storage. However, be assured that all of IBM's dedupe technology involves byte-for-byte comparisons so that you never lose any data due to false hash collisions. For all IBM compliance storage, what you write will be read back in the correct sequence of ones and zeros.
Continuing my week in Chicago, for the IBM Storage Symposium 2009, I attended what in my opinion was the bestsession of the week. This was by a guy named Chip Copper, who covered IBM's set of Ethernet and Fibre Channelnetworking gear. Attributes are the four P's:
Power and Cooling (electricity usage)
Equipment comes in two flavors: Top-of-Rack (ToR) thin pizza box switches, and Middle-of-Row (MoR) much larger directors.The MoR directors are engineered for up to 50Gbps per half-slot, so 10GbE and the future 40GbE can be easily accommodated in a single half-slot, and the future 100GbE can be done with a full slot (two half-slots).
While many companies might have been contemplating the switch from copper wires to optical fiber, there is a new reason for copper cables: Power-over-Ethernet (PoE). Many IP-phones, digital video surveillance cameras, and other equipment can have a single cable that delivers both signal and electricity over copper. If you have already deployed optical fiber throughout the building, there are "last mile" options where the signals are converted to copper wires and electrical energy added for these types of devices.
Two directors can be connected together with Inter-Chassis Link (ICL) cables to make them look like a single director with twice the number of ports. These are different than Inter-Switch Links (ISL) as they are not counted as an extra "hop" for networking counting purposes, especially important for FICON usage.
Today, we have 1Gbps, 2Gbps, 4Gbps and 8Gbps Fibre Channel. Since these all use 10-for-8 encoding (10 bits represents one 8-bit byte), then in was easy to calculate throughput: 8Gpbs was 800 MB/sec, for example. Auto-negotiation between speeds is not done at the HBA card, switch or director blade itself, but in the Short Form-factor Pluggable (SFP) optical connector. However, you can only auto-negotiate if the encoding matches. The 4/2/1 SFP can run at 4Gbps or auto-negotiate to slower 2Gbps and 1Gbps. The 8/4/2 SFP can run at 8Gbps, or auto-negotiate down to slower 4Gpbs and 2Gbps. Folks who still have legacy 1Gbps equipment, but want to run some things at 8 Gbps, can buy 8Gbps-capable switches or director blades, but then put some 4/2/1 SFPs into them. These 4/2/1 SFP are cheaper, so this might be something to consider if budgets are tight. Some SFPs handle up to 10km distances, but others only 4km, so be careful not to order the wrong ones.
Unfortunately, there are proposals in place for 10Gbps and 40Gbps that would use a different 66-for-64 encoding (66 bits represent 8 bytes), so 10Gbps would be 1200 MB/sec. These are used today for ISL between directors and switches.In theory, the 40Gbps could auto-negotiate down to 10Gbps, but not to any of the 8/4/2/1 Gbps that use different 10-for-8 encoding.
For those who cannot afford a SAN768B, there is a smaller SAN384B that can carry: 192 ports (4Gpbs/2Gbps), 128 ports (8Gbps) or 24 ports (10Gbps). The SAN384B can be ICL connected to another SAN384B or even the SAN768B as your needs grow.
On the entry-level side, the SAN24B-4 offers a feature called "Access Gateway". This makes the SAN24B look like an SAN end-point host, rather than a switch, and makes initial deployment of integrated bundled solutions easier. Once connected to everything, you can convert it over to full "switch" mode.The SAN40B-4 and SAN80B-4 provide midrange level support, including Fibre Channel routing at the 8Gbps level. In fact, all 8Gbps ports include routing capability. IBM offers both single-port and dual-port 8Gbps host bus adapter (HBA) cards to connect to these switches. These HBA offer 16 virtual channels per port, so that if you have VMware running many guests, or want to connect both disk and tape to the same HBA, you can keep the channel traffic separate for Quality of Service (QoS).
Chip wrapped up his session to discuss Fibre Channel over Ethernet (FCoE), and explained why we need to have a loss-less Convergence Enhanced Ethernet (CEE) to meet the needs of storage traffic as well as traditional Fibre Channel does today. IBM offers all of the equipment you need to get started today on this FCoCEE, with Converged Network Ethernet cards for your System x servers, and a new SANB32 that has 24 10GbE CEE ports and 8 traditional 8Gbps FC ports. This means that you can put the CNA card in your existing servers, connect to this switch, and then connect to your existing 10GbE LAN and your existing 8Gpbs or 4Gpbs FC-based SAN to the rest of your storage devices.
Worried that the FCoE or CEE standards could change after you deploy this gear? Aren't most LAN and SAN switches based on Application-specific integrated circuit [ASIC] chips which are created in the factory? Don't worry, IBM's equipment have put all the standards-vulnerable portions of the logic into separate Field-programmable gate array [FPGA] that can be updated with simplya firmware upgrade. This is future-proofing I can agree with!
Continuing my week in Chicago, I decided to attend some of the presentations from the System x side. This is the advantage of running both conferences in the same hotel, attendees can choose how many of each they want to participate in.
Wayne Wigley, IBM Advanced Technical Support (ATS), presented a series of presentations on different server virtualization offerings available for System x and BladeCenter servers. I am very familiar with virtualization implemented on System z mainframes, as well as IBM's POWER systems, and have working knowledge of Linux KVM and Xen, so I was well prepared to handle hearing the latest about Microsoft's Hyper-V and VMware's Vsphere version 4.
Microsoft Hyper-V 2008
Hyper-V can run as part of Windows 2008, are standalone on its own.Different levels of Windows 2008 include licenses for different number of Windows virtual machines (VMs).Windows Server 2008 Standard includes 1 Windows VM, Enterprise includes 4 Windows VMs, and the Datacenter edition includes unlimited number of Windows VMs. If you want to run more Window VMs than come included, you need to pay extra for each additional one. For example, to run 10 Windows VMs on a 2-socket server would cost about $9000 US dollars on Standard but only $6000 US dollars on Datacenter edition (list prices from Microsoft Web site).
Unlike VMware, which takes a monolithic approach as hypervisor, Hyper-V is more like Xen with a microkernelized approach. This means you need a "parent" guest OS image, and the rest of the Guest OS images are then considered "child" images.These child images can be various levels of Windows, from Windows XP Pro to Windows Server 2008, Xen-enabled Linux, or even a non-hypervisor-aware OS.The "parent" guest OS image provides networking and storage I/O services to these "child" images.For the hypervisor-aware versions of Windows and Linux, Hyper-V allows optimized access to the hypervisor, "synthetic devices", and hypercalls. Synthetic devices present themselves as network devices, but only serve to pass data along the VMBus to other networking resources. This process does not require software emulation, and therefore offers higher performance for virtual machines and lower host system overhead.For non-hypervisor-aware OS images, Hyper-V provides device emulation through the "parent" image, which is slower.
Microsoft System Center Virtual Machine Manager (SCVMM) can manage both Hyper-V and VMware VI3 images.Wayne showed various screen shots of the GUI available to manage Hyper-V images.In standalone mode, you lose the nice GUI and management console.
Hyper-V supports external, internal and private virtual LANs (VLAN). External means that VMs can communicate with the outside world over standard ethernet connections. Internal means that VMs can communicate with "parent" and "child" guest images on the same server only. Private means that only "child" guests can communicate with other "child" images.
Hyper-V supports disk attached via IDE, SATA, SCSI, SAS, FC, iSCSI, NFS and CIFS. One mode is "Virtual Hard Disk" (VHD) similar to VMware VMDK files. The other is "pass through" mode, which are actual disk LUNs accessed natively. VHDs can be dynamic (thin provisioned), fixed (fully allocated), or differencing. The concept of differencing is interesting, as you start with a base read-only VHD volume image, and have a separate "delta" file that contains changes from the base image.
Some of the key features of Hyper-V 2008 are:
Being able to run concurrently 32-bit and 64-bit versions of Linux and Windows guest images
Support for 64 GB of memory and 4-way symmetric multiprocessing (SMP) per VM
Clustering for High Availability and Quick Migration of VM images
Live backup with integration with Microsoft's Volume Shadow Copy Services (VSS)
Virtual LAN (VLAN) support, and Virtual and Pass-through physical disk support
A clever VMbus, virtual service parent/client approach to sharing hardware
Optimized performance options for hypervisor-aware versions of Windows and Linux, and emulated supportfor non-hypervisor-aware OS images.
VMware Vsphere v4.0
This was titled as an "Overview" session, but really was an "Update" session on the newest features of this release. The big change appears to be that VMware added "v" in front of everything.
Under vCompute, there are some new features on VMware's Distributed Resource Scheduler (DRS) which includes recommended VM migrations. Dynamic Power Management (DPM) will move VMs during periods of low usageto consolidate onto fewer physical servers so as to reduce energy consumption.
Under vStorage, vSphere introduces an enhanced Plugable Storage Architecture (PSA), with supportfor Storage Array Type Plugins (SATP) and Path Selection Plugins (PSP). This vStorage API allows forthird party plugins for improved fault-tolerance and complex I/O load balancing algorithms. This releasealso has improved support for iSCSI, including Challenge-Handshake Authentication Protocol (CHAP) support.Similar to Hyper-V's dynamic VHD, VMware supports "thin provisioning" for their virtual disk VMDK files.A feature of "Storage Vmotion" allows conversion between "thick" and "thin" provisioning formats.
The vStorage API for Data Protection provide all the features of VMware Consolidated Backup (VCB). The APIprovides full, incremental and differential file-level backups for Windows and Linux guests, including supportfor snapshots and Volume Shadow Copy Services (VSS) quiescing.
VMware introduces direct I/O pass-through for both NIC and HBA devices. While thisallows direct access to SAN-attached LUNs similar to Hyper-V, you lose a lot of features like Vmotion, High Availability and Fault Tolerance. Wayne felt that these restrictions are temporary, that hopefully VMwarewill resolve this over the next 12 months.
Under vNetwork, VMware has virtual LAN switches called vSwitches. This includes support for IPv6and VLAN offloading.
The vSphere server can now run with up to 1TB of RAM and 64 logical CPUs to support up to 320 VM guest images.Each VM can have up to 255GB RAM and up to 8-way SMP.Vsphere ESX 4 introduces a new virtual hardware platform called VM Hardware v7. While Vsphere 4.0 can run VMs from ESX 2 and ESX 3, the problem is if you have new VMs based on this newer VM Hardware v7, you cannot run them on older ESX versions.
Vsphere comes in four sizes: Standard, Advanced, Enterprise, and Enterprise Plus, ranging in list price from $795 US dollars to $3495 US dollars.
While IBM is the #1 reseller of VMware, we also are proud to support Hyper-V, Xen, KVM and other similar products.Analysts expect most companies will have two or more server virtualization solutions in their data center, and it is good to see that IBM supports them all.
Continuing my week in Chicago for the IBM Storage and Storage Networking Symposium and System x and BladeCenter Technical Conference, I presented a variety of topics.
Hybrid Storage for a Green Data Center
The cost of power and cooling has risen to be a #1 concern among data centers. I presented the following hybrid storage solutions that combine disk with tape. These provide the best of both worlds, the high performance access time of disk with the lower costs and reduced energy consumption of tape.
IBM [System Storage DR550] - IBM's Non-erasable, Non-rewriteable (NENR) storage for archive and compliance data retention
IBM Grid Medical Archive Solution [GMAS] - IBM's multi-site grid storage for PACS applications and electronic medical records[EMR]
IBM Scale-out File Services [SoFS] - IBM's scalable NAS solution that combines a global name space with a clustered GPFS file system, serving as the ideal basis for IBM's own[Cloud Computing and Storage] offerings
Not only do these help reduce energy costs, they provide an overall lower total cost of ownership (TCO) thantraditional WORM optical or disk-only storage configurations.
The Convergence of Networks - Understanding SAN, NAS and iSCSI in the Data Center Network
This turned out to be my most popular session. Many companies are at a crossroads in choosing data and storage networking solutions in light of recent announcements from IBM and others. In the span of 75 minutes, I covered:
Block storage concepts, storage virtualization and RAID levels
File system concepts, how file systems map files to block storage
Network Attach Storage, the history of the NFS and CIFS protocols, Pros and Cons of using NAS
Storage Area Networks, the history of SAN protocols including ESCON, FICON and FCP, Pros and Cons of using SAN
IP SAN technologies, iSCSI and Fibre Channel over Ethernet (FCoE), Pros and Cons of using this approach
Network Convergence with Infiniband and Fibre Channel over Convergence Enhanced Ethernet (FCoCEE), why Infiniband was not adopted historically in the marketplace as a storage protocol, and the features and enhancements of Convergence Enhanced Ethernet (CEE) needed to merge NAS, SAN and iSCSI traffic onto a single converged data center network [DCN]
Yes, it was a lot of information to cover, but I managed to get it done on time.
IBM Tivoli Storage Productivity Center version 4.1 Overview and Update
In conferences like these, there are two types of product-level presentations. An "Overview" explains howproducts work today to those who are not familiar with it. An "Update" explains what's new in this version of the product for those who are already familiar with previous releases. I decided to combine these into one sessionfor IBM's new version of [Tivoli Storage Productivity Center].I was one of the original lead architects of this product many years ago, and was able to share many personalexperiences about its evolution in development and in the field at client facilities.Analysts have repeatedly rated IBM Productivity Center as one of the top Storage Resource Management (SRM) tools available in the marketplace.
Information Lifecycle Management (ILM) Overview
Can you believe I have been doing ILM since 1986? I was the lead architect for DFSMS which provides ILM support for z/OS mainframes. In 2003-2005, I spent 18 months in the field performingILM assessments for clients, and now there are dozens of IBM practitioners in Global Technology Services andSTG Lab Services that do this full time. This is a topic I cover frequently at the IBM Executive Briefing Center[EBC], because it addressesseveral top business challenges:
Reducing costs and simplifying management
Improving efficiency of personnel and application workloads
Managing risks and regulatory compliance
IBM has a solution based on five "entry points". The advantage of this approach is that it allows our consultants to craft the right solution to meet the specific requirements of each client situation. These entry points are:
Tiered Information Infrastructure - we don't limit ourselves to just "Tiered Storage" as storage is only part of a complete[information infrastructure] of servers,networks and storage
Storage Optimization and Virtualization - including virtual disk, virtual tape and virtual file solutions
Process Enhancement and Automation - an important part of ILM are the policies and procedures, such as IT Infrastructure Library [ITIL] best practices
Archive and Retention - space management and data retention solutions for email, database and file systems
I did not get as many attendees as I had hoped for this last one, as I was competing head-to-head in the same time slot as Lee La Frese covering IBM's DS8000 performance with Solid State Disk (SSD) drives, John Sing covering Cloud Computing and Storage with SoFS, and Eric Kern covering IBM Cloudburst.
I am glad that I was able to make all of my presentations at the beginning of the week, so that I can then sit back and enjoy the rest of the sessions as a pure attendee.
This week I am in Chicago for the IBM Storage and Storage Networking Symposium, which coincides with the System x and BladeCenter Technical Conference. This allows the 800 attendees to attend both storage or server presentations at their convenience. There were hundreds of sessions, over 20 time slots, so for each time slot, you have 15 or so topics to choose from.Mike Kuhn kicked off the series of keynote sessions. Here's my quick recap of each one:
Curtis Tearte, General Manager, IBM System Storage
Curtis replaced Andy Monshaw as General Manager for IBM System Storage. His presentation focused on how storage fits into IBM's Dynamic Infrastructure strategy. Some interesting points:
a billion camera-enabled cell phones were sold in 2007, compared to 450 million in 2006.
IBM expects that there will be 2 billion internet users by 2011, as well as trillions of "things".
In the US, there were 2.2 million medical pharmacy dispensing errors resulting for handwritten prescriptions.
Time wasted looking for parking spaces in Los Angeles consumed 47,000 gallons of gasoline, and generated 730 tons of carbon dioxide.
In the US, 4.2 billion hours are lost, and 2.9 billion gallons of gas consumed, due to traffic congestion.
Over the past decade, servers went from 8 watts to 100 watts per $1000 US dollars.
Data growth appears immune to the economic recession. The digital footprint per person is expected to grow from 1TB today to over 15TB by 2020.
10 hours of YouTube videos are uploaded every minute.
Bank of China manages 380 million bank accounts, processing over 10,000 transactions per second.
At the end of the session, Curtis transitioned from demonstrating his knowledge and passion of storage to his knowledge and passion in his favorite sport: baseball. Chicago is home to both the Cubs and the White Sox.
Roland Hagan, Vice President Business Line Executive, System x
IBM sets the infrastructure agenda for the entire industry. The Dynamic Infrastructure initiative is not just IT, but a complete end-to-end view across all of the infrastructures in play, including transportation, manufacturing, services and facilities.Companies spent over $60 billion US dollars on servers last year. Of these, 53 percent for x86-based servers, 9 percent for Itanium-based, 26 percent for RISC-based (POWER6, SPARC, etc.), and 11 percent mainframe. Theeconomic downturn has impacted revenues, but the percentages continue about the same.
The dominant deployment model remains one application per server. As a result, power, cooling and management costs have grown tremendously. There are system admins opposed to consolidating server images with VMware, Hyper-V, Xen or other server virtualizaition technologies. Roland referred to these admins as "server huggers".To help clients adopt cloud computing technologies, IBM introduced [Cloudburst] appliances. IBM plans to offer specialized versions for developers, for service providers, and for enterprises.
IBM's Enterprise-X Architecture is what differentiates IBM's x86-based servers from all the competitors, surrounding Intel and AMD processors with technology that provides distinct advantages. For example, to support server virtualization, IBM's eX4 provides support for more memory, which often is more critical than CPU resources when deploying large number of guest OS images. IBM System x servers have an integrated management module (IMM) and was the first to change over from BIOS to the new Unified Extensible Firmware Interface [UEFI] standard.
IBM servers offer double the performance, consume half the power, and cost a third less to manage, than comparably priced servers from competitors. Of the top 20 more energy efficient server deployments, 19 are from IBM. Roland cited customer reference SciNet, a 4000-server supercomputer with 30,000 cores based on IBM [iDataPlex] servers. At 350 TeraFLOPs it is ranked #16 fastest supercomputer in the world, and #1 in Canada. With apower usage effectiveness (PUE) less than 1.2, it also is very energy efficient. This means that for every 12 watts of electricity going in to the data center, 10 watts are used for servers, storage and networking gear, andonly 2 watts used for power and cooling. Traditional data centers have PUE around 2.5, consuming 25 watts total for every 10 watts used by servers, storage and networking gear.
Clod Barrera, Distinguished Engineer, Chief Technical Strategist for IBM System Storage
Clod presented trends and directions for disk and tape technology, disk and tape systems, and the direction towards cloud computing.
Long-time readers of my blog know that typically IBM makes its announcements on Tuesdays, but this week, we had an announcement today, Wednesday!
IBM announced agreements with Brocade, Cisco and Juniper Networks to help build more dynamic infrastructures. An IBM study estimates that the "digital footprint" of each person will grow from 1TB today to 16TB by the year 2020, and all of that data will need bandwidth to get around.IBM’s Data Center Networking (DCN) Initiative is focused on providing clients with solutions to address these three key areas in networking:
Partner for choice of networking products based and open standards to ensure clients can select from a full range of hardware options for data center networks. IBM will build on its strong partnerships with leading networking vendors to provide greater customer choice.
Integrate with IBM Data Center Products and Services. IBM continues to deliver a comprehensive portfolio of services for network design, integration and management from IBM Global Technology Services (GTS).
IBM differentiates itself with Common Data Center Management, where we can bring together software products, such as IBM Systems Director and Tivoli portfolio, to create what we refer to as a "Unified Service Management" software platform.
Here's a sample of what IBM announced:
IBM continues its strategic support for Fibre Channel over Ethernet (FCoE) with a Converged B32 switch, and Converged Network Adapters (CNA) for IBM System x servers. A CNA card does the job of both the Ethernet Network Interface Card (NIC) as well as the Fibre Channel Host Bus Adapter (HBA), reducing the number of cables from each server.
IBM and its Business Partners will resell the Cisco Nexus 5000 Series Switches, a leading family of high-performance, low-latency switches for data center networks supporting lossless 10GbE, Fibre Channel and Fibre Channel over Ethernet (FCoE).
IBM will OEM selected Juniper EX and MX switches and routers. This expands upon IBM and Juniper's long-term relationship that includes a reseller agreement with IBM Global Technology Services, collaboration on Juniper's Stratus Project, and IBM's ten worldwide Cloud Labs.
In addition to keynote speakers Curtis Tearte, General Manager for IBM System Storage, and Clod Barrera, Chief Technical Strategist, my colleague Jack Arnold and I from the [IBM Tucson Executive Briefing Center] will present four topics each.
Now that the frozen economy is starting to thaw, I have been traveling like crazy this month. So far, I have been to Rochester, MN, Los Angeles and San Diego, CA, and now currently in Austin, TX. On the plus side, I was able to enjoy the [Fourth of July] holiday weekend on the beaches of San Diego.
(If you have not been to California beaches lately, here's a quick [video] reminder)
So the big news this week is that the auction over Data Domain is over, and EMC's bid finally won over NetApp. Both NetApp and EMC have data deduplication capabilities in their existing product lines, but neither could compete against IBM's TS7650G ProtecTIER Data Deduplication gateway and TS7650 ProtecTIER appliances, and so were hell-bent to buy Data Domain for large amounts. The final price agreed upon was over two billion US dollars for Data Domain.
For the most part, Data Domain's products are targeted towards small and medium sized businesses, whereas IBM's TS7650 and TS7650G products targets medium and larger sized enterprises.So now that EMC has a viable data deduplication solution, it looks like it will be yet another IBM-vs-EMC debate going forward.