This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
Continuing my coverage of the IT Security and Storage Expo in Brussels, Belgium, here is my post on the presentations I gave during the week.
There were four presentations each day. Of the five rooms, I was assigned one room in which to give all of my presentations, room 3. My room was quite large, with sixty seats.
It is a good idea for public speakers to understand Dutch, French, German and English in Belgium. In recognition of the fact that Belgians are multi-lingual, I started each session with "Goede Middag, Bon Jour and Good Afternoon!" and ended each with "Dank U, Merci and Thank you for attending!"
12:00 to 12:30pm
What is big data? Architectures and Practical Use Cases
What is big data? Architectures and Practical Use Cases (repeat)
12:45 to 1:15pm
An IBM Storage solution for small and mid-size business? The Storwize V3700!
An IBM Storage solution for small and mid-size business? The Storwize V3700! (repeat)
1:30 to 2:00pm
A New Generation of Storage Tiering
A New Generation of Storage Tiering (repeat)
2:15 to 2:45pm
Replication for High Availability, Business Continuity and Disaster Recovery
Storage, Server and Network in one Flexible and Integrated solution! The PureSystems family
The sessions were all half-hour slots. The only presentation that I had a challenge getting down to 30 minutes was my session on "New Generation of Storage Tiering" in which I was asked to cover Easy Tier sub-LUN automated tiering, Server-to-Storage cooperative caching, Texas Memory Systems, hierarchical storage Management (HSM), Active Cloud Engine, and SmartCloud Storage!
Helping me out were three local IBM interns. From left to right: Joelle, Clara and Bryan. I hadn't noticed that there were only short breaks between sessions, all of this time consumed with one-on-one discussions with clients, so the interns were kind enough to fetch me snacks and drinks.
Joelle and Bryan speak Dutch, which is similar to the local Flemish language. Clara speaks French, which came in handy for translations.
I would like to thank my room monitors: Jolijn, Ella and Chloe. All three are local college students hired by the conference for the two days to scan name badges and count bodies in seats.
(I had to ask Jolijn to write her name on a piece of paper because it is Dutch and I had no clue how to spell it for this blog post.)
While it might appear that room 3 was "The Tony Pearson Show -- all Tony, all the time!" there were actually worthwhile sessions in the other rooms. Fellow blogger Jon Toigo [known for his DrunkenData blog] presented "Storage Infrastruggle 2013 -- Containing Storage Costs without Sacrificing Access, Protection or Management". My IBM colleague Ron Riffe presented a vendor-neutral look at Storage Hypervisors.
If the attendees wanted copies of my presentations, they were directed to get their name badge scanned at the IBM and I.R.I.S-ICT booth, all the way at the other end of the hall, and my presentations would be emailed to them.
(For those who have missed it, you can find all five of my presentations uploaded to the [IBM Expert Network] on Slideshare.)
Finally, I would like to thank my IBM colleagues who helped me develop and review my presentations: Brigitte Van Den Eynde, Joe Hayward, Jeff Jonas, Tom Deutsch, Chris Saul, Marisol Diaz, Iliana Garcia, Harley Puckett, Jack Arnold, and Steve McKinney.
The Belgium IT Security and Storage Expo was a great success!
(I am back to the USA in Portland, Oregon this week, so these posts relate to last week.)
However, that wasn't to say I didn't encounter a few challenges during my week in Belgium. The first was getting to the venue. The Belgium Expo is a large complex of buildings to the north of the city. The local IBM team suggested I go to the facility a day in advance so that I would be able to see where it was and how to get there.
I was staying in the center of town, in Place Rogier section. I had many transportation options:
Take a taxi. It was raining this week, so finding a taxi was difficult.
Take the bus. The Bus #260 goes directly from my hotel to the Belgium Expo, but only goes once an hour.
Take the metro. The metro operates frequently, and the Haysel stop is right in front of the Belgium Expo complex.
Upon arrival to the building complex, I was unsure of which building I needed to be in. Standing in front of the beautiful Building 5, I found this legend that provided the answer: Building 8. In front of Building 12 was a map that showed where Building 8 was located on the campus.
For this event, IBM joined forces with IBM Business Partner I.R.I.S-ICT to have a fabulous booth, with plenty of experts and equipment demos. As is often the case, the team had to work late into the night to get all the equipment set up, all the podiums and counters constructed, and the demos fully operational.
Apparently, I was not the only one to have troubles finding the place, so I did not feel alone. Some with cars drove around the complex several times before figuring out which parking lot to park in. Others parked at the first spot they found, and still ended up walking as much as I did.
For future reference, If you plan to attend any event at the Belgium Expo, either (a) ask for more explicit directions, and (b) plan to do lots of walking!
Sadly, only 70 percent of doctors in the United States use Electronic Medical Record [EMR] systems. My own Primary Care Physician has made the switch, and told me he how much he loves having ready access to the information he needs. EMR systems reduce costs, help manage risk, and improve healthcare outcomes. It is no surprise that the U.S. government has taken a [stick-and-carrot approach] to encourage doctors to use them.
A frequent topic at the Tucson Executive Briefing Center where I work is how to make the most use of IT for healthcare and life sciences. For much of 2011 and 2012, I was also one of the technical advocates assigned to Wellpoint Insurance, in support of their adoption of IBM Watson technology for healthcare.
Well, it was Tuesday again, and we had quite a lot of announcements here at IBM this week!
Over 1,800 clients attended the [Live February 5 webcast]! The announcements were all part of IBM's SmartCloud Storage portfolio. Here are the highlights:
STN7800 Real-time Compression Appliance
Back in October 2010, IBM announced the acquisition of Storwize, Inc., renaming its NAS-compression units to the IBM Real-time Compression appliances. Some folks were confused, so I had a blog post [IBM Storwize Product Name Decoder Ring].
IBM initially offered two models:
The [STN6500 model] had 16 Ethernet ports 1GbE (16x1GbE) and a pair of four-core processors.
The [STN6800 model] had either eight 10GbE ports (8x10GbE), or four 10GbE plus eight 1GbE ports (4x10GbE+8x1GbE). It has a pair of six-core processors.
Now, IBM offers the [STN7800 model], which can replace either of the ones above, offering 16x1GbE, 8x10GbE, and 4x10GbE+8x1GBE port configurations. It has a pair of eight-core processors to handle more robust Cloud Storage environments. See [Announcement Letter 113-012] for more details.
New XIV Gen3 model 214
With its awesome support for VMware, the XIV is often chosen for Cloud storage. The new XIV model 214 now offers up to a dozen 10GbE ports, or you can stay with the 22 1GbE ports available on previous models. These can be used for iSCSI host attachment and/or IP-based replication.
IBM strives to make each new model of every storage device more energy efficient than the last.
The new XIV model is no exception. The original XIV, introduced in 2008, consumed 8.4 kVA fully loaded. The XIV Gen 3 model 114 consumed 7.0 kVA. This new model 214 consumes only 5.9 kVA!
It has been almost three years since my now infamous post [Double Drive Failure Debunked: XIV Two Years Later]. Back then, the XIV offered only 1TB and 2TB drives, with rebuild time for 1TB drive of less than 30 minutes, and for 2TB less than 60 minutes.
The new XIV Gen3 software 11.2 release, available for both the 114 and 214 models, can now rebuild a 2TB drive in less than 26 minutes, and a 3TB drive in less than 39 minutes. There is also support specific to Windows Server 2012 including thin provisioning, MSCS, VSS, and Hyper-V. See [Announcement Letter 113-013] for more details.
SmartCloud Storage Access
IBM is the first major storage vendor to offer a product of this kind, so understanding it may be a bit difficult.
The concept is simple. Rather than having end-users having to ask IT every time they need some storage space, IBM created a self-service portal that frees up the IT department to work on more important transformational projects.
This is basically what people can do with "Public Cloud" storage service providers, so basically IBM is now giving you the capability with your "Private Cloud" storage deployment.
Here is the sequence of events. End users point their favorite web browser to the self-service portal, and login using their credentials stored in your Active Directory or LDAP server database.
Once validated, the end-user now can request new storage space, expanding their existing space, or returning the space to the IT department. For new storage requests, users can have a choice of storage classes, -- such as Gold, Silver and Bronze-- defined in the Tivoli Storage Productivity Center (TPC), either stand-alone or in the SmartCloud Virtual Storage Center.
But wait! Do you want to give every end-user a blank check to provision their own storage? Most IT staff are horrified at the thought.
Knowing this, IBM has included an option to put in an approval process, based on the end-user and the amount of capacity requested. The approver can be the cloud administrator, or someone delegated for approvals, known as an environment owner.
For some users, policies may restrict the storage classes as well. For example, Fred can only have Silver or Bronze, but not Gold.
Once the approval is obtained, TPC then issues the appropriate commands to the appropriate SONAS or Storwize V7000 Unified device. SmartCloud Storage Access can do this for thousands of storage devices across dozens of geographically dispersed locations.
Before, the Cloud Admin had to configure storage pools of managed disks, define file systems, dole out file sets to hundreds or thousands of users with hard quotas, and then configure shares based on the protocols required, like CIFS, NFS, HTTPS, etc.
With SmartCloud Storage Access, the Cloud admin still defines the pools and file systems, but then lets the self-service capability of the software to create the file sets, set the quotas and configure shares with the appropriate protocols. This greatly reduces the work on the IT staff, and greatly improves the turn-around time for end-user requests to get exactly what they want, when they need it.
The next time you withdraw money from an ATM machine, fill up your gas tank at the self-service gas station, then serve your own salad at the salad bar and fill up your own soft drink at the fast food restaurant, you will realize and appreciate that SmartCloud Storage Access is a brilliant move for the IT staff.
Cloud administrators, environment owners, and end-users can all use SmartCloud Storage Access to monitor and report on storage usage.
(Note: I am neither a medical doctor nor registered dietician. I can share with you ideas that have worked for me, that might help you achieve your goals. I strongly suggest you read books and consult with medical experts as necessary.)
Here are key attributes of my ideal diet:
It is an ongoing "life-style" diet. I want a diet that will help me maintain my desired weight for the rest of my life. I don't want one diet to lose weight, and another diet to gain it all back.
Easy to follow at home, at work, at friend's houses, and at restaurants. By easy, I mean that I can enjoy the food, and eat it in front of co-workers and clients without drawing ridicule.
Does not merely involve substituting each one food with a "healthier" imitation. The controversy over [WhoNu? Cookies] is a good example. These cookies are delicious, look and taste like [Oreo cookies], but claim to be healthier. According to the box, a serving size of three WhoNu cookies have the fiber equivalent of a bowl of oatmeal, the calcium of a glass of milk, and the Vitamin C of a cup of bluepberries. Several bloggers have [compared the ingredients and nutrition facts].
Provides my body enough essential amino acids, fats, vitamins and calories. The diet can include any vitamins or other supplements that are needed to make it a complete.
Over the years, I have tried out the following diets. Here is my experience with each one:
The Zone Diet
Dr. Barry Sears created [the Zone diet] to help diabetics, and it turned out to be good for lots of other people. The "zone" refers to a balance of hormones in your bloodstream that can be achieved if you eat the right ratio of carbs, proteins and fats in every meal. The plan is based on a "block" consisting of 9g of carb, 7g of protein, and 1.5g of fat.
Meals on this plan are merely combining the same number of blocks from each category. Four ounces of beef steak, a cup of kidney beans, and two tbsp of sour cream represents a 4-block meal. The number of blocks per day you are allowed to eat is based on the amount of lean body mass that determines your protein requirements. It was 14 blocks for me.
Pros: I liked this diet, it worked for me. In addition to three meals a day, you can snack between meals, so long as the snacks were also balanced.
Cons: Everything had to be weighed or measured. Difficult to choose meals at restaurants that meet the ratio requirements.
The Four-Hour Body Diet
Fellow blogger Tim Ferriss published the diet that has worked for him for the past seven years. Some call this a "slow-carb" diet. He has helped people [Lose 20 lbs of fat in 30 days without exercise]. The rules are fairly simple:
Rule 1: Do not eat any "white" starchy foods: rice, pasta, bread, cereal, potatoes. Non-white versions of these are also forbidden, so no brown rice, brown bread or green pasta!
Rule 2: All meals are a combination of leans, beans and greens. The leans are low-fat animal-based proteins like egg whites, fish and meat. Beans can be a variety of legumes. Greens can be a wide variety of fruits and vegetables that aren't in the "white" category above.
Rule 3: Eat the same meals over and over again, with breakfast within the first 30 minutes of waking up. The idea here is to eliminate the desire to eat by taking away variety. Once you realize that food is just fuel and building blocks for your body, you can get away from the emotional issues of food.
Rule 4: Don't drink your calories. Avoid any liquid with calories, including milk, fruit juice and soft drinks. Tim makes an exception for red wine, which is good for your health.
Rule 5: Take one day off per week, a "dieters gone wild" cheat day. Pick a day, say Saturday, and that day you can eat anything you want, pizza, tacos, fried Twinkies. It is not that cheating is allowed one day a week, but is required for its affect on metabolism, to avoid [ketosis].
This last rule was perhaps the strangest part of the diet. The intended side-benefit was that if you could look forward to a day in the near future to have something you crave, it would give you the willpower to pass it up today. The boost in carbs also resets your metabolism, so that your body doesn't think it is in starvation mode.
Mo and I got popcorn and large soft drinks at the movie theaters on those days. Stocking "cheat food" in your house just adds extra temptation. Trying to schedule our social life around our cheat days proved quite difficult. As a result, "cheat days" turned into cheat weekends and cheat evenings.
Pros: I liked this diet, it worked for me, but it didn't work for Mo.
Cons: Having gone to chef school, I like to prepare a wide variety of meals. I enjoy food, and variety is the spice of life. Also, I often eat breakfast with clients, which means that I will not be able to eat within 30 minutes of waking up (unless I eat breakfast twice!).
The Forks-over-Knives Diet
After watching the movie [Forks over Knives], I decided to try a plant-based, whole-food vegetarian diet. This is basically a vegetarian diet, but discourages dairy, bread, pasta and refined grains.
I was surprised to learn that you can get enough protein on such a diet. It can be done. Rice and beans are shelf-stable, so you can stock up with fewer trips to the grocery store, and eat very inexpensively.
Pros: I liked this diet, I was able to stick with it, and enjoy the meals. Many restaurants in Tucson accomodate vegetarians with substitutions.
Cons: I didn't lose any weight on this diet. I had difficult time trying to combine foods to make complete proteins. I had vitamin deficiency, and had to take multi-vitamin and other supplements to compensate.
The Paleo Diet
The [Paleo diet] reflects the fact that humans have been around for over 200,000 years, but grains, dairy and other processed foods have only been around for the past 10,000 years. Our genetic code is just not designed for these new foods.
Basically, if a hunter-gather could have "hunted it" or "gathered it", then it can be eaten. The diet consists of eggs, fish, fresh meats, poultry, vegetables, fruits, berries, nuts and seeds. It does not include dairy, bread, pasta, wheat, rye, barley, soy, oats, rice, corn, quinoa, beans, products made from processed meats or refined grains.
As for measurements and proportions, I try to eat at least 90g of Protein, and try to eat less than 150g of Carbs. The diet fits well with the foods that I eat in restaurants with clients, the food we are served at work, and the foods that I can prepare at home.
Pros: I like this diet, it is the one that I am currently on.
Cons: I missing putting half-and-half cream in my coffee! Occasionally, I crave some mac-and-cheese, beans-and-rice, a slice of apple pie, or simply a peanut butter and jelly sandwich.
If you have any experiences with these diets, or a different diet that worked for you, please post a comment below!
(Note: I am neither a medical doctor nor registered dietician. I can share with you ideas that have worked for me (or people I know) that might help you achieve your goals. I strongly suggest you read books and consult with medical experts as necessary.)
The problem is that most people think of dieting as something you do temporarily. People decide to lose weight, go on a diet, reach their target goal weight, go back to their previous ways, and gain the weight back.
The word Diet comes from the Greek language and means "way of life". Every day that food enters your mouth, you are on a diet. People aren't on or off a diet, but rather switch from one diet to another. The trick is to find a healthy diet that you can live with the rest of your life, so your weight doesn't go up and down.
Most health experts agree that the [Western pattern diet], typical in the United States and other developed countries, is [certainly not healthy]. Washing down that bologna-and-cheese on white bread sandwich with a 44-ounce high-fructose soft drink hasn't served Americans well. This combination of processed meats, refined grains, dairy, and sugar-laden foods has shown to cause obesity and other health problems.
Physicians at Cornell University found that [men take better care of their cars than their bodies]. If you tell a guy that his car takes 12 gallons of high-octane gasoline, 5 quarts of 5W-30 oil, and a 50/50 mix of water and anti-freeze, he would totally understand what you mean.
But tell that same guy that his diet must consist of an appropriate ratio of complete proteins, monounsaturated fats, and carbs with a low glycemic index, and he will scratch his head. Aren't calories just calories?
Unlike a car, where the gasoline, oil and anti-freeze get poured into different openings into fixed metal containers, the human body takes in all of the things it needs in one opening, your mouth, and receives it into a stretchable container, your belly. While carbs are just converted to fuel, the proteins and fats have actual functions and bring building blocks that cannot be built from just carbs alone.
Carbs are found mostly in foods like fruits, grains and vegetables. Not all carbs are the same. Some break down quickly to glucose, the sugar molecule that represents fuel for the rest of your body. Others break down slowly. Consider a fireplace, you put a few pieces of newspaper or kindling, and the larger logs on top. The newspaper is easy to light, but burns quickly. The logs on the other hand burn slowly and give you hours of heat.
Eating the Western pattern diet is like filling your fireplace with newspaper, and having to re-light your fire over and over after all the newspaper burns out.
Proteins are the building blocks of your muscles and other internal organs. These are built from amino acids, and your body can't make them, you have to have them in your diet. Even if you lead a sedentary lifestyle, sit all day at a desk, then sit all evening in front of the television, your body needs to repair internal muscles and organs with proteins, so you need to eat proteins every day to replenish these amino acids.
Complete proteins, such as those in beef, eggs and fish, have all the amino acids represented. Plant-based proteins, like rice, beans, and wheat, are incomplete, lacking one or more of the amino acids you need.
Fats are needed to absorb fat-soluble vitamins, which are important for a variety of functions. Monounsaturated fats can be found in olive oil, nuts, and avocados. While many people feel the saturated fats in red meat and dairy are bad for your health, there are exceptions. Coconut milk is high in saturated fats, but good for you.
There is some dispute and controversy on exactly what is an ideal diet. This can be partly attributable to articles that report findings from observational studies, rather than from double-blind clinical studies. To understand the difference, I suggest you watch Tom Naughton present [Science for Smart People] in this amusing 46-minute video.
Over the past few years, I have tried out several different diets, to figure out which one is best for me. I'll save those details for my next post.
Well, it's that time of year again. While every corporate blogger waits for their employer to release last year's earning report, we are forced to find other things to write about that comply within [corporate "black-out" rules].
"Insanity is doing the same thing over and over again but expecting different results." -- Albert Einstein
In addition to being a technical consultant for IBM, I am also a certified yoga instructor with formal training. Back in 2004, I co-founded the Tucson Laughter Club, based on [Hasya yoga], a form of yoga that incorporates breathing, stretching and laughter exercises. The two jobs are actually similar, in which I am standing in front of a group of people, telling them what to do and how to do it.
January is the month where gyms and yoga classes are filled with new students who have made New Year's Resolutions. Every time I am asked "What should I do to lose weight, get fit, and sleep better?"
(Note: I am neither a medical doctor nor registered dietician. I can share with you ideas that have worked for me (or my yoga students) that might help you achieve your goals. I strongly suggest you read books and consult with medical experts as necessary.)
I always tell them the same answer. But first, I make them promise they won't share the secret with anyone, and that I will whisper it in their ear. After I get their nod of agreement, I whisper "Eat Less and Exercise More."
I get the same quizzical look every time. The response is typically "That's your big secret? Everyone knows that!" If that's true, why are nearly a third of all Americans obese, out-of-shape, and/or sleep-deprived? The answer is the knowing-doing gap.
While the book is focused on why businesses fail to achieve their goals, I think many of the principles apply to individuals trying to reach their health goals:
Understand "Why" before "How". People are quick to follow process and procedures, rather than understanding the underylying biology, chemistry, or physiology.
Knowing comes from doing and teaching others. Learning is best done by trying a lot things, learning from what works and what does not, thinking about what was learned, and trying again.
Actions speaks louder than words, thoughts, and elegant plans. Without taking some action, learning is more difficult and less efficient because it is not grounded in real experience. When I was in Japan, one of the employees told me their boss was NATO, which stood for "No Action, Talk Only!"
There is no doing without mistakes. In building a culture of action, one of the most critical elements is how you treat yourself when
things go wrong. Even well planned actions can go wrong. All learning involves some failure, something from which one can continue to learn.
Fear fosters knowing-doing gaps, so drive out fear. Do you fear making mistakes? Do you fear success? Do you fear people will make fun of you for trying something outside your comfort zone? Drive out that fear!
Measure what matters and what can help turn knowledge into action. Peter Drucker is often quoted as saying "If you can't measure it, you can't manage it!" The trick is to figure out which measurements lead to corrective actions.
If you have problems keeping any of your New Year's Resolutions, try to figure out why. Is it because you didn't know what to do? Or, more likely, you know what you needed to do, but didn't do it? Feel free to enter your comments below!
(What does this have to do with Storage? When IBM got back into networking in a big way, they had to decide whether to combine it with one of the existing groups, or form its own group. IBM decided to merge networking with storage, which makes sense since the primary purpose of most networks is to access or transmit information stored somewhere else.)
Last April, the Wharton School and the Institute for the Future convened a one-day [After Broadband] workshop in San Francisco, California, that brought together a group of leading technologists, entrepreneurs, academics and policymakers to explore the future of broadband over the next decade.
Continuing this week's theme about the future, fellow blogger, published author, and futurist David Houle is coming out with a new book this month titled [Entering the Shift Age]. This is a follow-on to his book, [The Shift Age].
Since this book cites IBM studies explicitly, his PR department asked me to review it. If you are an aspiring author that has a book you want me review, and it relates to the topics my blog covers like Cloud, Big Data, storage, and the explosion of information, feel free to send me a copy!
(FTC Disclosure: I work for IBM. I was not paid by anyone to mention this book on my blog. I was provided an "Uncorrected Advanced Copy" of this book at no cost to me for this review. I do not know David Houle personally, have not read any of his prior works, nor have I ever seen him speak at public events. This post is neither a paid nor celebrity endorsement of this author, his book, nor any other books by this author.)
First, let's get a few details out of the way:
Title:Entering the Shift Age, 284 pages Author: David Houle, futurist Genre: Non-fiction, trends and predictions
Publisher: Sourcebooks, Inc. Publish date: January 2013
As I mentioned in my post [Historians vs. Futurists], there is only one past, but there are many potential futures. There seems to be as many futurists out there as there are potential futures. I suspect not everyone will agree with all that David has written. However, this reminds me of one of my favorite quotes:
"When two futurists always agree, one is no longer necessary." -- old Italian adage
In his book, David asks a series of thought-provoking questions, then answers them with his views and opinions on how the future will roll out:
Is humanity now entering a new age that is different than the Information age?
If so, what should we call it?
Which forces are driving this new age?
How will this impact various aspects and institutions of society?
David feels humanity is indeed entering a new age, which he calls the Shift Age. This is driven by three forces: the shift to globalization of culture and politics, the flow of power and influence to individuals, and the acceleration of electronic connectedness.
In a sense, David is like a hunter-gatherer from the Stone age, hunting down trends and gathering ideas from others. In much the same way my compost brings renewed purpose to the rinds and pits of my fruits and vegetables, David's book does a good job paraphrasing the works of many of today's leading futurists.
David predicts the decade we are now in, the 2010's, will mark the end of the Information age, a transition period to this new era, that will lead to transformations in government, education, health, technology, and energy.
Over the past two weeks, I had time to enjoy a variety of movies. I had seen several whose stories wrapped around key moments of transition.
"Gone with the Wind", as well as the new offering "Lincoln" from Steven Spielberg. Both are set in the 1860's, the time of the [American Civil War], pitting the Industrial-age forces of the North, against the Agricultural-age economy of the South. This time saw the transition from slavery to freedom.
"Doctor Zhivago", set in the time of World War I, on the German-Russian front, as well as the Russian Revolution of 1917, and the resulting Civil War between the Red Guard and the White Army. This saw the transition from a Russian government ruled by Czars, to one ruled by the people through Communism.
"Lawrence of Arabia", also set in the time of World War I, but south in Arabia. T. E. Lawrence was able to bring several warring Arab tribes together to defeat the Turks, and was a key figure in the transition to an Arab National Council.
Some might call these completely unexpected [Black Swan] events, while others might feel they are merely fortunate (or misfortunate) sequences of events that led to inevitable social change. Has something happened, or will something happen later this decade, that will drive us to leave the Information Age?
David's previous book, The Shift Age, was published back in 2007, and a lot has happened in the past six years: a global financial melt-down recession; the Arab Spring uprisings in the Middle East; Barack Obama was elected and re-elected; man-made climate change in the form of hurricanes, tsunamis and superstorms hit various parts of the world; brush fires lit up Australia, and BP's Deepwater Horizon oil rig exploded off the Gulf coast, just to name a few.
David's new book reflects the impact of these recent events, from discussions on his [Evolutionshift] blog, to Q&A sessions he has after his public speaking presentations. For those who are not interested in the wide array of topics he covers in this one book, David also offers [a dozen different mini-eBooks] that cover specific topics like [Technology, Energy and Health].
My Rating: Moist and Flaky
Who should read this book: If you are a time-traveler from 1975 that came to this decade to learn all about what your future has in store, but can only select one book to read before you zoom back to your own time period, this would be the book I recommend.
I do not want to imply this is a quick read, or one that you can't put down once you start reading it. Just like you should not gulp down a full bottle of cheap Vodka in one sitting, this book should be read over a series of days, as I did, so that you can mull over in your mind the different points and thoughts he is trying to convey.
Today is the last day of 2012, so it is only fitting to end the year looking forward to the future!
While I have been accused of being a historian, I consider myself a bit of a futurist. Since 2006, I have been blogging about the future of technology, including Cloud, Big Data, and the explosion of information. As a consultant for the IBM Executive Briefing Center, I present to clients IBM's future plans, strategies, and product roadmaps.
(Fellow blogger Mark Twomey on his Storagezilla blog has a humorous post titled [Stuff your Predictions], expressing his disdain for articles this time of year that predict what the next 12 months will bring. Don't worry, this is not one of those posts!)
What exactly is a futurist? Biologists study biology. Techologists study technology. But a person can't simply time-travel to the future, read the newspaper, make observations, take notes, and then go back in time to share his findings.
Here seem to be the key differences between Historians vs. Futurists:
There is only one past.
There are many possible futures.
Only six percent of humanity are alive today, so historians must study history through the writings, tools, and remains of those that have passed on.
Futurists study the past and the present, looking for patterns and trends.
Search for insight.
Search for foresight.
Framework to explain what happened and why.
Framework to express what is possible, probable, and perhaps even preferable.
A common framework for both is the concept of the various "Ages" that humanity has been through:
Around 200,000 years ago, in the middle of what archaeologists refer to as the [Paleolithic Era], man walked upright and used tools made of stone to hunt and gather food. Humans were nomadic and travelled in tribes to follow the herds of animals as they migrated season to season. The History Channel had a great eight-hour series called [Mankind: The Story of All of Us] that started here, and worked all the way up to modern times.
About 10,000 years ago, humans got tired of chasing after their meals, and settled down, growing their food instead. Grains like wheat, rice, and corn became staples of most diets around the world. Civilization evolved, and people traded what they grew or made in exchange for items they needed or wanted.
About 300 years ago, humans developed machines to help do things, and even to help build other machines. While farmers harnessed oxen to plow fields, and horses to speed up travel and communication, these were all based on muscle power.
Machines like the steam engine were powered by coal, petroleum, or natural gas. Today, one gallon of gasoline can do the work of 600 man-hours of human muscle power, or [move a ton of freight 400 miles].
Cities grew up with skyscrapers of steel, connected by trains, planes and automobiles. Communications with the telegraph, telephone, radio and television replaced sending message on horseback.
The forces that drove humanity to the Industrial age clashed with the culture and identity established during the Agricultural age. I highly recommend futurist Thomas Friedman's book [The Lexus and the Olive Tree] that covers these conflicts.
When exactly did the Information age begin? Did it start with Guttenberg's muscle-powered [Printing Press] in the year 1450, or the first punched card in 1725?
Futurist [Alvin Toffler] published his book The Third Wave in 1980. He coined the phrase "Third Wave" to describe the transition from the Industrial age to the Information age.
While IBM mainframes were processing information in the 1950's, many people associate the Information Age with the IBM Personal Computer (1981) or the World Wide Web (1991). Over 100 years ago, IBM started out in the Industrial age, with business machines like meat scales and cheese slicers. IBM led the charge into the Information Age, and continues that leadership today.
In any case, value went from atoms to bits. Computers and mobile devices transfer bits of data, information and ideas, from nearly anyplace on the planet to another, in seconds.
Ideas and content are now king, rather than land, buildings, machines and raw materials of the Industrial age. In 1975, less than 20 percent of a business assets were intangible. By 2005, over 80 percent is.
While the Industrial age was dominated by left-brain thinking, the Information Age requires the creativity of right-brain thinking. I highly recommend Daniel Pink's book, [A Whole New Mind] that covers this in detail.
"The future is already here -- it's just not very evenly distributed!" -- William Gibson (1993)
The problem with looking back through history as a series of "Ages" is that they really didn't start and end on specific days. The Agricultural age didn't end on a particular Sunday evening, with the Industrial age starting up the following Monday morning.
There are still people on the planet today in the Stone age. On my last visit to Kenya, I met a nomadic tribe that still lives this way. Huts were temporarily constructed from sticks and mud, and abandoned when it was time to move on.
A short-sighted charity built a one-room school house for them, hoping to convince the tribe that staying in one place for education was more important than hunting and gathering food in a nomadic lifestyle. Some stayed and starved.
In the United States, about 2 percent of Americans grow food for the rest of us, with enough left over to make ethanol and give food aid to other countries.
Sadly, the Standard American Diet continues to be foods mostly processed from wheat, rice and corn, even though our human genetic make-up has not yet evolved from a "Paleolithic" mix of [meats, nuts and berries].
There are still people on the planet today in the Industrial age. American schools are still geared to teach children for Industrial age jobs, but still take "summer vacation" to work in the fields of the Agricultural age? Seth Godin's book [Stop Stealing Dreams] is a great read on what we should do about this.
Wrapping up my series on a [Laptop for Grandma], I finally have something that I think meets all of my requirements! Special thanks to Guidomar and the rest of my readers who sent in suggestions!
I could have called this series "The Good, the Bad, and the Ugly". The [Cloud-oriented choices] weren't bad per se, but expected persistent Internet connection. The [Low-RAM choices] were not ugly per se, but had limited application options. The ones below were good, in that they helped me decide what would be just right for grandma.
Linux Mint 9
One of my readers, Guidomar, suggested Linux Mint Xfce. At LinuxFest Northwest 2012, Bryan Lunduke indicated that [Linux Mint] is the fastest growing Linux in popularity. You can watch his 43-minute presentation of [Why Linux Sucks!] on YouTube.
The latest version is Mint 14, but that has grown so big it has to be installed on a DVD, as it will no longer fit on a 700MB CD-ROM. Since I don't have a DVD drive on this Thinkpad R31, I dropped down to the latest Gnome edition that did fit on a LiveCD, which was Mint 9.
(In retrospect, I could have used the [PLoP Boot Manager CD], and installed the latest Linux Mint 14 from USB memory stick! My concern was that if a distribution didn't fit on a CD-ROM, it was expecting a more modern computer overall, and thus would probably require more than 384MB or RAM as well.)
Linux Mint is actually a variant of Ubuntu, which means that it can tap into the thousands of applications already available. Mint 9 is based on Ubuntu 10.04 LTS.
One of the nice features of Linux Mint is that there are versions with full [Codecs] installed. A codec is a coder/decoder software routine that can convert a digital data stream or signal, such as for audio or video data. Many formats are proprietary, so codecs are generally not open source, and often not included in most Linux distros. They can be installed manually by the Linux administrator. Windows and Mac OS are commercially sold and don't have this problem, as Microsoft and Apple take care of all the licensing issues behind the scenes.
The installation went smooth. It would have gladly set up a dual-boot with Windows for me, but instead I opted to wipe the disk clean and install fresh for each Linux distribution I tried.
Running it was a different matter. The screen would go black and crash. There just wasn't enough memory.
Since [Peppermint OS] was partially based on Lubuntu, I thought I would give [Lubuntu 12.04] a try. The difference is that Peppermint OS is based on Xfce (as is Xubuntu), but Lubuntu claims to have a smaller memory footprint using Lightweight X11 Desktop Environment (LXDE). This version claims to run in 384MB, which is what I have on grandma's Thinkpad R31.
There are two installers. The main installer requires more than 512MB to run, so I used the alternate text-based Installer-only CD, which needs only 192MB.
The LXDE GUI is simple and straightforward. As with Peppermint OS, I did have to install the Codec plugins. However, the time-to-first-note was less than two minutes, so we can count this as a success!
Linux Mint 12 LXDE edition
Circling back to Linux Mint, I realized that my problem up above was chosing the wrong edition. Apparently, Linux Mint comes in various editions, the main edition I had selected was based on Gnome which requires at least 512MB of RAM.
Other editions are based on KDE, xFCE and LXDE. Linux Mint 9 LXDE requires only 192MB of RAM, and the newer Linux Mint 12 LXDE requires only 256MB. I choose the latter, and the install went pretty much the same as Mint and Lubuntu above.
The music player that comes pre-installed is called [Exaile], which supports playlists, audio CDs, and a variety of other modern features, so no reason to install Rhythmbox or anything else. Grandma can even rip her existing audio CDs to import her music into MP3 format. Time-to-first-note was about two minutes.
The best part: the OS only takes up about 4GB of disk, leaving about 15GB for MP3 music files!
Lubuntu and Linux Mint LXDE were similar, but I decided to go with the latter because I like that they do not force version upgrades. This is a philosophical difference. Ubuntu likes to keep everyone on the latest supported releases, so will often remind you its time to upgrade. Linux Mint prefers to take an if-it-aint-broke-don't-fix-it approach that will be less on-going maintenance for me.
A few finishing touches to make the system complete:
A nice wallpaper from [InterfaceLift]. This website has high-res photography that are just stunning.
Power management with screen-saver settings to a nice pink background with white snowflakes falling.
A small collection of her MP3 music pre-loaded so that she would have something to listen to while she learns how to rip CDs and copy over the rest of her music.
Icons on the main desktop for Exaile, My Computer, Home Directory, and the Welcome Screen.
Larger Font size, to make it easier to read.
Update settings that only look for levels "1" and "2". There are five levels, but "1" and "2" are considered the safest, tested versions. Also, an update is only done if it does not involve installing or removing other packages. This should offer some added stability.
I considered installing [ClamAV] for anti-virus protection, but since this laptop will not be connected to the Internet, I decided not to burn up CPU cycles. I also considered installing [Team Viewer] which would allow me remote access to her system if anything should every fail. However, since she does not have Wi-Fi at home, and lives only a few minutes across town, I decided to leave this off.
Once again, I want to thank all of my readers for their suggestions! I learned quite a lot on this journey, and am glad that I have something that I am proud to present to grandma: boots quickly enough, simple to use, and does not require on-going maintenance!
Continuing my series on a [Laptop for Grandma], I thought I would pursue some of the "low-RAM" operating system choices. Grandma's Thinkpad R31 has only 384MB of RAM.
All of the ones below are based on Linux. For those who aren't familiar with installing or running the Linux operating system, here are some helpful tips:
Most Linux distributors allow you to download an ISO file for free. These can be either (a) burned to a CD, (b) burned to a DVD, or (c) written to a USB memory stick.
The ISO can be either a "LiveCD/LiveDVD" version, an installation program, or a combination of the two. The "Live" version allows you to boot up and try out the operating system without modifying the contents of your hard drive. Windows and Mac OS users can try out Linux without impact to their existing environment. Some Linux distributions offer both a full LiveCD+Installer version, as well as an alternate text-based Installer-only version. The latter often requires less RAM to use.
When installing, it is best to have the laptop plugged in to an electrical outlet, and hard-wired to the internet in case it needs to download the latest drivers for your particular hardware.
A CD can hold only 700MB. Many of the newer Linux distributions exceed that, requiring a DVD or USB stick instead. If your laptop has an older optical drive, it may not be able to read DVD media. Some older optical drives can only read CD's, not burn them. In my case, I burned the CDs on another machine, and then used them on grandma's Thinkpad R31.
To avoid burning "a set of coasters" when trying out multiple choices, consider using rewriteable optical media, or the USB option. If you don't like it, you can re-use for something else.
The program [Unetbootin] can take most ISO files and write them to a bootable USB stick. On my Red Hat Enterprise Linux 6 laptop, I had to also install p7zip and p7zip-plugins first.
The BIOS on some older machines, like my grandma's Thinkpad R31, cannot boot from USB. The [PLoP Boot Manager] allows you to first boot from floppy or CD-ROM, and then allows you to boot from the USB. This worked great on my grandma's system. The PLoP Boot Manager is also available on the [Ultimate Boot CD].
While I am a big fan of SUSE, Red Hat, and Ubuntu, these all require more RAM than available on grandma's laptop. Here are some Low-RAM alternatives I tried:
Damn Small Linux 4.11 RC2
The Damn Small Linux [DSL] project was dormant since 2008, but has a fresh new release for 2012. This baby can run in as little 16MB or RAM! If you have 128MB of RAM or more, the OS can run entirely from RAM, providing much faster performance.
Of course, there are always trade-offs, and in this case, apps were chosen for their size and memory footprint, not necessarily for their user-friendliness and eye candy. For example, the xMMS plays MP3 music, but I did not find it as friendly as iTunes or Rhythmbox.
Boot time is fast. From hitting the power-on button to playing the first note of MP3 music was about 1 minute.
Installing DSL Linux on the hard drive converts it into a Debian distribution, which then allows more options for applications.
Next up was [MacPup]. The latest version is 529, based on Pupply Linux 5.2.60 Precise, compatible with Ubuntu 12.04 Precise Pangolin. While traditional Puppy Linux clutters the screen with apps, the MacPup tries to have the look-and-feel of the MacOS by having a launcher tray at the bottom center of the screen.
Both MacPup and Puppy Linux can run in very small amounts of RAM and disk space. Like DSL above, you can opt to run MacPup entirely in 128MB of RAM. Unfortunately, the trade-off is a lack of application choices.
Installation to the hard drive was quite involved, certainly not for the beginner. First, you have to use Gparted to partition the disk. I created a 19GB (sda1) for my files, and 700MB (sda5) for swap. I had troubles with "ext4" file system, so re-formatted to "ext3". Second, you have to copy the files over from the LiveCD using the "Puppy Universal Installer". Third, you have to set up the Bootloader. Grub didn't work, so I installed Grub4Dos instead.
The music app is called "Alsa Player", and I was able to drag the icon into the startup tray. time-to-first-note was just over 1 minute. Fast, but not as "simple-to-use" as I would like.
SliTaz 4.0 claims to be able to run in as little as 48MB of RAM and 100MB of disk space. Time-to-first-note was similar to MacPup, but I didn't care for the TazPanel for setup, and the TazPkg for installing a limited set of software packages. I could not get Wi-Fi working at all on SliTaz, and just gave up trying.
All three of these ran on grandma's Thinkpad R31, and all three could play MP3 music. However, I was concerned that they were not as simple to use as grandma would like, and I would be concerned the amount of time and effort I might have to spend if things go wrong.
Tomorrow, according to the [Mayan calendar], the end of the 5,125 year cycle rolls over, so it only makes sense to party like it's 1999!
Of course, if you were in the IT industry 13 years ago, you may remember similar hoopla around [Year 2000] when the Gregorian calendar rolled over from "99" to "00". Some of us were asked to work right up to the last day of 1999, and be on-call the first week of 2000, just in case! Tomorrow may prove to be more or less a repeat of that.
Fortunately, there was plenty of other reasons to celebrate these past few weeks.
Birthdays in December Party
The IBM Tucson employees and contractors of building 9070 got together for a combination party, celebrating both the end of 2012 and for three people with birthdays in December: my former manager Bill, my colleague Kris, and myself. Here is our birthday cake! Afterwards, we allVacation movie.
(Note: This was sponsored by my third-line manager, David Gelardi, who one way or another, is responsible for all the IBMers in this building. Thank you David! )
This will be the last year for us to do this, as we are planning to move over to join the employees of building 9032 next year!
IBM Club Event
The IBM Club had its final event at [Golf N' Stuff] family fun park. Over 700 IBM employees and their family members came to eat breakfast burritos and play miniature golf and other games. It had rained earlier in the morning, so the go-kart track was wet, and the staff were trying to dry with leaf blowers. The rest of the park was fully operational, and the weather cleared up nicely. Mo, Rafael and I played golf but the turf was still wet in a few spots. There were also video games, bumper boats, and batting cages.
IBM volunteers dressed up as fictional characters for the kids to take pictures with.
I was proud to be a member of the seven-person IBM Club board for 2012. When I was nominated, I didn't think I stood a chance to be elected, as I was running against five or six other well-qualified candidates, but somehow it happened. I am glad to have been part of the 19-year tradition of the IBM Club history.
(Note: I didn't campaign for this position, but many IBMers in Tucson knew that I had previously owned and managed Tucson Fun & Adventures that organized 15-25 events every month for hundreds of single adults in the Tucson area. This might have helped my chances for election a bit!)
Next year, the IBM Club transitions to the more-efficient "Club Central" model, which is both board-less and cash-less. Instead of a seven-person board organizing events that are fully-funded or partially-subsidized by IBM, events will now be organized by IBM volunteers who post the details on Facebook. All participants simply pay for the events they attend directly to the venue or facility involved.
While the National Aeronautics and Space Administration [NASA] has put out videos and press releases these past 10 days to assure us [there will be a 2013], this shouldn't stop anyone from having a good time! If you did anything special to celebrate the end of the Mayan Calendar, please comment below!
Today is my birthday. Another year around the sun.
Actually, there are several other famous people who have December 18 as their birthday as well. Rather than focusing on myself, I thought I would share the love with the others who share the same day. Here are a few of my favorite celebrities:
[Kari] is famous for her role on the TV show Mythbusters. While she still looks like she's in her twenties, I was surprised to learn that we are less than a decade apart in age! The show is credited with helping young students get excited for Science, Technology, Engineering and Math (STEM) topics.
Most recently, I watched her in the series covering [Punkin Chunkin], an annual contest where teams of engineers design machines to throw pumpkins the furthest across a large field. Some are able to propel the pumpkin over half a mile in distance!
[Steven] is famous for directing some of my favorite movies, including Close Encounters of the Third Kind, Jurassic Park, and Raiders of the Lost Ark and the rest of the Indiana Jones series. He won academy awards for his films Schindler's List and Saving Private Ryan.
[Christina] is singer/songwriter, and one of the judges on the TV show The Voice. I especially enjoyed her performance of her song "Reflection" in the Disney animated film Mulan.
[Ray] is famous for acting in a variety of movies, everything from a mobster in Goodfellas, to a baseball player in Field of Dreams. I immediately recognized his voice as one the characters in my favorite video game, Grand Theft Auto.
"Stone Cold" Steve Austin
While I am not a big fan of wrestling, I prefer to think of [Steve] in his roles in various action movies, including The Condemned, The Stranger, and The Expendables.
[Katie] is an actress in movies like Abandon and Batman Begins, but is more famous for having married, and then later divorced, Tom Cruise.
[Brad] is famous for acting in a variety of movies, including Seven, 12 Monkeys, and The Curious Case of Benjamin Button. For those who still don't fully understand "big data" analytics, I highly recommend the movie Moneyball, in which Brad plays the General Manager Billy Beane of the Oakland A's baseball team, during their wildly successful 2002 season.
While I have never met of these celebrities in person, I wish them all a happy birthday today!
In my last blog post [Full Disk Encryption for Your Laptop] explained my decisions relating to Full-Disk Encryption (FDE) for my laptop. Wrapping up my week's theme of Full-Disk Encryption, I thought I would explain the steps involved to make it happen.
Last April, I switched from running Windows and Linux dual-boot, to one with Linux running as the primary operating system, and Windows running as a Linux KVM guest. I have Full Disk Encryption (FDE) implemented using Linux Unified Key Setup (LUKS).
Here were the steps involved for encrypting my Thinkpad T410:
Step 0: Backup my System
Long-time readers know how I feel about taking backups. In my blog post [Separating Programs from Data], I emphasized this by calling it "Step 0". I backed up my system three ways:
Backed up all of my documents and home user directory with IBM Tivoli Storage Manager.
Backed up all of my files, including programs, bookmarks and operating settings, to an external disk drive (I used rsync for this). If you have a lot of bookmarks on your browser, there are ways to dump these out to a file to load them back in the later step.
Backed up the entire hard drive using [Clonezilla].
Clonezilla allows me to do a "Bare Machine Recovery" of my laptop back to its original dual-boot state in less than an hour, in case I need to start all over again.
Step 1: Re-Partition the Drive
"Full Disk Encryption" is a slight misnomer. For external drives, like the Maxtor BlackArmor from Seagate (Thank you Allen!), there is a small unencrypted portion that contains the encryption/decryption software to access the rest of the drive. Internal boot drives for laptops work the same way. I created two partitions:
A small unencrypted partition (2 GB) to hold the Master Boot Record [MBR], Grand Unified Bootlloader [GRUB], and the /boot directory. Even though there is no sensitive information on this partition, it is still protected the "old way" with the hard-drive password in the BIOS.
The rest of the drive (318GB) will be one big encrypted Logical Volume Manager [LVM] container, often referred to as a "Physical Volume" in LVM terminology.
Having one big encrypted partition means I only have to enter my ridiculously-long encryption password once during boot-up.
Step 2: Create Logical Volumes in the LVM container
I create three logical volumes on the encrypted physical container: swap, slash (/) directory, and home (/home). Some might question the logic behind putting swap space on an encrypted container. In theory, swap could contain sensitive information after a system [hybernation]. I separated /home from slash(/) so that in the event I completely fill up my home directory, I can still boot up my system.
Step 3: Install Linux
Ideally, I would have lifted my Linux partition "as is" for the primary OS, and a Physical-to-Virtual [P2V] conversion of my Windows image for the guest VM. Ha! To get the encryption, it was a lot simpler to just install Linux from scratch, so I did that.
Step 4: Install Windows guest KVM image
The folks in our "Open Client for Linux" team made this step super-easy. Select Windows XP or Windows 7, and press the "Install" button. This is a fresh install of the Windows operating system onto a 30GB "raw" image file.
(Note: Since my Thinkpad T410 is Intel-based, I had to turn on the 'Intel (R) Virtualization Technology' option in the BIOS!)
There are only a few programs that I need to run on Windows, so I installed them here in this step.
Step 5: Set up File Sharing between Linux and Windows
In my dual-boot set up, I had a separate "D:" drive that I could access from either Windows or Linux, so that I would only have to store each file once. For this new configuration, all of my files will be in my home directory on Linux, and then shared to the Windows guest via CIFS protocol using [samba].
In theory, I can share any of my Linux directories using this approach, but I decide to only share my home directory. This way, any Windows viruses will not be able to touch my Linux operating system kernels, programs or settings. This makes for a more secure platform.
Step 6: Transfer all of my files back
Here I used the external drive from "Step 0" to bring my data back to my home directory. This was a good time to re-organize my directory folders and do some [Spring cleaning].
Step 7: Re-establish my backup routine
Previously in my dual-boot configuration, I was using the TSM backup/archive client on the Windows partition to backup my C: and D: drives. Occasionally I would tar a few of my Linux directories and storage the tarball on D: so that it got included in the backup process. With my new Linux-based system, I switched over to the Linux version of TSM client. I had to re-work the include/exclude list, as the files are different on Linux than Windows.
One of my problems with the dual-boot configuration was that I had to manually boot up in Windows to do the TSM backup, which was disruptive if I was using Linux. With this new scheme, I am always running Linux, and so can run the TSM client any time, 24x7. I made this even better by automatically scheduling the backup every Monday and Thursday at lunch time.
There is no Linux support for my Maxtor BlackArmor external USB drive, but it is simple enough to LUKS-encrypt any regular external USB drive, and rsync files over. In fact, I have a fully running (and encrypted) version of my Linux system that I can boot directly from a 32GB USB memory stick. It has everyting I need except Windows (the "raw" image file didn't fit.)
I can still use Clonezilla to make a "Bare Machine Recovery" version to restore from. However, with the LVM container encrypted, this renders the compression capability worthless, and so takes a lot longer and consumes over 300GB of space on my external disk drive.
Backing up my Windows guest VM is just a matter of copying the "raw" image file to another file for safe keeping. I do this monthly, and keep two previous generations in case I get hit with viruses or "Patch Tuesday" destroys my working Windows image. Each is 30GB in size, so it was a trade-off between the number of versions and the amount of space on my hard drive. TSM backup puts these onto a system far away, for added protection.
Step 8: Protect your Encryption setup
In addition to backing up your data, there are a few extra things to do for added protection:
Add a second passphrase. The first one is the ridiculously-long one you memorize faithfully to boot the system every morning. The second one is a ridiculously-longer one that you give to your boss or admin assistant in case you get hit by a bus. In the event that your boss or admin assistant leaves the company, you can easily disable this second passprhase without affecting your original.
Backup the crypt-header. This is the small section in front that contains your passphrases, so if it gets corrupted, you would not be able to access the rest of your data. Create a backup image file and store it on an encrypted USB memory stick or external drive.
If you are one of the lucky 70,000 IBM employees switching from Windows to Linux this year, Welcome!
Earlier this year, IBM mandated that every employee provided a laptop had to implement Full-Disk Encryption for their primary hard drive, and any other drive, internal or external, that contained sensitive information. An exception was granted to anyone who NEVER took their laptop out of the IBM building. At IBM Tucson, we have five buildings, so if you are in the habit of taking your laptop from one building to another, then encryption is required!
The need to secure the information on your laptop has existed ever since laptops were given to employees. In my blog post [Biggest Mistakes of 2006], I wrote the following:
"Laptops made the news this year in a variety of ways. #1 was exploding batteries, and #6 were the stolen laptops that exposed private personal information. Someone I know was listed in one of these stolen databases, so this last one hits close to home. Security is becoming a bigger issue now, and IBM was the first to deliver device-based encryption with the TS1120 enterprise tape drive."
Not surprisingly, IBM laptops are tracked and monitored. In my blog post [Using ILM to Save Trees], I wrote the following:
"Some assets might be declared a 'necessary evil' like laptops, but are tracked to the n'th degree to ensure they are not lost, stolen or taken out of the building. Other assets are declared "strategically important" but are readily discarded, or at least allowed to [walk out the door each evening]."
Unfortunately, dual-boot environments won't cut it for Full-Disk Encryption. For Windows users, IBM has chosen Pretty Good Privacy [PGP]. For Linux users, IBM has chosen Linux Unified Key Setup [LUKS]. PGP doesn't work with Linux, and LUKS doesn't work with Windows.
For those of us who may need access to both Operating Systems, we have to choose. Select one as the primary OS, and run the other as a guest virtual machine. I opted for Red Hat Enterprise Linux 6 as my primary, with LUKS encryption, and Linux KVM to run Windows as the guest.
I am not alone. While I chose the Linux method voluntarily, IBM has decided that 70,000 employees must also set up their systems this way, switching them from Windows to Linux by year end, but allowing them to run Windows as a KVM guest image if needed.
Let's take a look at the pros and cons:
LUKS allows for up to 8 passphrases, so you can give one to your boss, one to your admin assistant, and in the event they leave the company, you can disable their passphrase without impacting anyone else or having to memorize a new one. PGP on Windows supports only a single passphrase.
Linux is a rock-solid operating system. I found that Windows as a KVM guest runs better than running it natively in a dual-boot configuration.
Linux is more secure against viruses. Most viruses run only on Windows operating systems. The Windows guest is well isolated from the Linux operating system files. Recovering from an infected or corrupted Windows guest is merely re-cloning a new "raw" image file.
Linux has a vibrant community of support. I am very impressed that anytime I need help, I can find answers or assistance quickly from other Linux users. Linux is also supported by our help desk, although in my experience, not as well as the community offers.
Employees that work with multiple clients can have a separate Windows guest for each one, preventing any cross-contamination between systems.
Linux is different from Windows, and some learning curve may be required. Not everyone is happy with this change.
(I often joke that the only people who are comfortable with change are babies with soiled diapers and prisoners on death row!)
Implementation is a full re-install of Linux, followed by a fresh install of Windows.
Not all software required for our jobs at IBM runs on Linux, so a Windows guest VM is a necessity. If you thought Windows ran slowly on a fully-encrypted disk, imagine how much slower it runs as a VM guest with limited memory resources.
In theory, I could have tried the Windows/PGP method for a few weeks, then gone through the entire process to switch over to Linux/LUKS, and then draw my comparisons that way. Instead, I just chose the Linux/LUKS method, and am happy with my decision.
For the past three decades, IBM has offered security solutions to protect against unauthorized access. Let's take a look at three different approaches available today for the encryption of data.
Approach 1: Server-based
Server-based encryption has been around for a while. This can be implemented in the operating system itself, such as z/OS on the System z mainframe platform, or with an applicaiton, such as IBM Tivoli Storage Manager for backup and archive.
While this has the advantage that you can selectively encrypt individual files, data sets, or columns in databases, it has several drawbacks. First, you consume server resources to perform the encryption. Secondly, as I mention in the video above, if you only encrypt selected data, the data you forget to, or choose not to, encrypt may result in data exposure. Third, you have to manage your encryption keys on a server-by-server basis. Fourth, you need encryption capability in the operating system or application. And fifth, encrypting the data first will undermine any storage or network compression capability down-line.
Approach 2: Network-based
Network-based solutions perform the encryption between the server and the storage device. Last year, when I was in Auckland, New Zealand, I covered the IBM SAN32B-E4 switch in my presentation [Understanding IBM's Storage Encryption Options]. This switch receives data from the server, encrypts it, and sends it on down to the storage device.
This has several advantages over the server-based approach. First, we offload the server resources to the switch. Second, you can encrypt all the files on the volume. You can select which volumes get encrypted, so there is still the risk that you encrypt only some volumes, and not others, and accidently expose your data. Third, the SAN32B-E4 can centralized the encryption key management to the IBM Tivoli Key Lifecycle Manager (TKLM). This is also operating system and application agnostic. However, network-based encryption has the same problem of undermining any storage device compression capability, and often has a limit on the amount of data bandwidth it can process. The SAN32B-E4 can handle 48 GB/sec, with a turbo-mode option to double this to 96 GB/sec.
Approach 3: Device-based
Device-based solutions perform the encryption at the storage device itself. Back in 2006, IBM was the first to introduce this method on its [TS1120 tape drive]. Later, it was offered on Linear Tape Open (LTO-4) drives. IBM was also first to introduce Full Disk Encryption (FDE) on its IBM System Storage DS8000. See my blog post [1Q09 Disk Announcements] for details.
As with the network-based approach, the device-based method offloads server resources, allows you to encrypt all the files on each volume, can centrally manage all of your keys with TKLM, and is agnostic to operating system and application used. The device can compress the data first, then encrypt, resulting in fewer tape cartridges or less disk capacity consumed. IBM's device-based approach scales nicely. IBM has an encryption chip is placed in each tape drive or disk drive. No matter how many drives you have, you will have all the encryption horsepower you need to scale up.
Not all device-based solutions use an encryption chip per drive. Some of our competitors encrypt in the controller instead, which operates much like the network-based approach. As more and more disk drives are added to your storage system, the controller may get overwhelmed to perform the encryption.
The need for security grows every year. Enterprise Systems are Security-ready to protect your most mission critical application data.
Mark your calednars! The dates are now official for IBM storage-related events in 2013. I know many of you plan your travel budgets early in the year, so I hope this will help you plan accordingly.
[IBM Pulse 2013] will be held March 3-6, 2013, at the MGM Grand in Las Vegas, Nevada. Back in 2008, I helped launch the inaugural event, combining previous events that focused on Tivoli and Maximo software solutions.
On a smarter planet, organizations must implement bold strategies to optimize business services, processes, and relationships. Cloud and mobility offer unlimited potential to create smarter infrastructures that fundamentally change the way we do business.
However, to deliver on this potential, you must manage your infrastructure through rapid change while changing the economics of IT: unleashing innovation, reinventing relationships and uncovering new markets.
Attend Pulse 2013 for the opportunity to share your expertise with thousands of your business and IT peers as you explore these strategies and more. With three days of top-notch keynotes, over 300 breakout sessions, labs, certification and our best Solution Expo ever, Pulse will provide the tools, insights and networking you need to turn opportunities into outcomes.
[IBM Edge 2013] will be held June 10-14, 2013, at the Mandalay Bay in Las Vegas, Nevada. Last year, I helped launch the inaugural event, combining previous storage events for storage admins, executives, and IBM Business Partners. Next year, Edge2013 will offer:
Over 400 technical sessions and hands on labs geared for novices to experts, with the ability to test drive the latest technology.
Exciting general sessions focused on Smarter Computing innovations and real-world success stories.
World class certification available on-site to validate your skills and demonstrate your proficiency in the latest IBM technology and solutions.
A comprehensive and expanded Solution Center giving you access to the latest storage, System x and PureSystems solutions from IBM and our sponsors.
The list of speakers have not yet been finalized, but I hope to participate at one or both of these events!
I had attended this conference the past four years, but sadly will not be attending the one this year. If you are attending this conference for the first time, perhaps a quick look at my blog posts from last year will help you get oriented:
I hope all of my American readers had a wonderful Thanksgiving holiday! The day after Thanksgiving is "Black Friday", the unofficial starting data for shopping for upcoming holiday presents and decorations. The Monday after that is now often referred to as "Cyber Monday", where many people purchase items on-line.
I thought this would be good time to promote my book series, Inside System Storage, Volumes I through V. These are available direct from my publisher, [Lulu], or from other on-line retailers.
The old adage "Never judge a book by its cover" often leads technical authors to select bland cover designs. I designed the cover art for the series to have a consistent look, but be unique enough to know each book is different. They all have a beige background with black text, three or four graphics representing the various storage themes du jour, and a color stripe spread diagonally across the spine.
Several readers have asked if there was any rhyme or reason for the color of each spine. One guessed it was based on the [electronic color code] used on resistors to mark their value. When I was getting my college degree in Electrical Engineering, the mnemonic "Better Be Right Or Your Great Big Venture Goes West" helped us remember the sequence: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Grey and White.
I can assure everyone I was not that clever. Here, instead, is the story behind each color chosen:
Volume I: Green
I received a flyer from Barnes and Noble advertising various books on sale. One caught my eye, so I went to buy it, but forgot to bring the flyer with me. A young woman offered to help me find it, but I could not remember the title, nor the editor, but it had a green cover, and was a collection of the world's shortest stories, all exactly 55 words in length, all winners in some high school contest. She found the flyer, looked up the book, and directed me to the shelf. After several minutes of her scanning the shelf by author, I reached for it, saying, "Here it is, the green one. This shade of green will fit perfectly in my collection of green books!" As I stood in line, the young woman told her boss, "That guy buys green books!" The rest of the folks in line overheard her, and all started laughing at her gullibility.
Volume II: Orange
In late 2007, I was under NDA to review the acquisition of a company called XIV. I was disclosed on the innovative design of the storage system, so that I could blog about it when the announcement was formal. This box would have a distinctive orange stripe across the disks. The announcement launch was a big success. Since then, every time the storage sales team needed a boost in sales for the [IBM XIV Storage System], I would write another blog about the clever features and capabilities.
Volume III: Purple
In 1996, I joined a social club called "Mile High Adventures and Entertainment", headquartered in Denver, Colorado, with locations in Phoenix, Tucson, San Diego, Los Angeles and Portland, Oregon. It was a group for singles to meet each other through social activities and events. A year later, it colapsed under the weight of heavy radio advertising debt. The local staff bought out the membership list, and launched a new club, under the name Tucson Fun and Adventures. It was a big part of my social life.
However, as the owners dropped out, one to start a family, another to take care of her father after her mother passed away, I started 2009 as the majority owner. The economic recession took its toll. Members were not spending as much of their disposable income of fun and entertainment. We restructured the company, revamped the website, and adopted Purple as our official color. Our event coordinators all wore purple shirts, and carried purple clipboards. Despite this major transformation, I just did not have time to run this company while still working full-time at IBM, so I sold it at year end.
Volume IV: Blue
As I mentioned in my blog post [IBM Introduces a New Era of Computing], IBM launched [PureSystems], a new family of expert-integrated systems. Since Volume IV was going to publish shortly after this announcement, I decided on the color blue to match the new door covers on the racks they came in. In less than a year, IBM has already sold over 1,000 of these systems in over 40 different countries.
Volume V: Grey
Chosing a color to represent the IBM Watson computer proved quite a challenge. I finally decided on grey, to represent "grey matter", a phrase often used to refer to the human brain. I picked a shade of grey that complements the three graphics that represent last year's strategic storage marketing themes. My blog post [How to Build Your Own Watson Jr. in your Basement] continues to be one of my highest read posts.
If you were having trouble getting ideas for gifts this holiday season, hopefully, this post gave you five new ideas for your friends, family, coworkers and clients! They are all available in hardcover, paperback, and eBook (PDF) for viewing on desktops, laptops, tablets or smartphones.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today also happens to be [Election Day] in the United States, and some have questioned IBM's logic of making major storage announcements on Election Day. During the campaigns, a major theme was to help Small and Medium size businesses, because these are the engines of economic growth and improved employment.
Hopefully, you all saw today's Launch Webcast on these announcements, but in case you missed it, waiting in line at the polling station to cast your vote, or caught without electricity or Internet access from [Superstorm Sandy], it is now available [On-Demand].
The 2U control enclosure can have up to four additional 2U expansion enclosures, for a maximum of 120 drives, or 180TB of raw disk capacity. Like the Storwize V7000, the Storwize V3700 supports a [large number of servers and operating systems.]
Many of the features you already know from the Storwize V7000 are carried forward:
1GbE iSCSI + 8GbFC
8GbFC, 10GbE iSCSI/FCoE, Statement of Direction for 6Gb SAS
8GB per canister
4GB per canister, upgradeable to 8GB
Up to 4 control enclosures in a clustered system, each with up to 9 expansion enclosures
Up to 4 expansion enclosures
Maximum Number of drives/TB
Up to 120 drives/180TB
RAID levels supported
GUI, CLI, SMI-S API
GUI, CLI, SMI-S API
Internal (included), external (optional)
Internal only (included)
Non-disruptive data migration
One-directional (migrate to Storwize V3700, included)
Statement of direction
Up to 256 targets (included)
Up to 64 targets (included) Statement of Direction for optional 2,040 targets
Metro Mirror and Global Mirror (optional)
Statement of Direction (optional)
The IBM Storwize V3700 is offered at attractive leasing options through IBM Global Financing.
IBM LTO-6 drives and midrange tape libraries
Last month, IBM's [Tape and Storage Hypervisor Announcements] included LTO-6 for the enterprise-class TS3500 tape library. Today, the LTO-6 support is complete with support for midrange tape drives and libraries.
There are two tape drive models. The TS2260 is based on the half-height drive, intended for occasional 9-to-5 usage. The TS2360 is based on the full-height drive, intended for 24x7 access. These drives can read LTO-4 and LTO-5 tape cartridge media, and can write LTO-5 cartridge media. The new LTO-6 tape cartridge media is expected to be available next month.
In addition to the IBM TS3500 Enterprise Tape Library, LTO-6 is now supported on all of the midrange tape libraries: TS2900, TS3100, TS3200 and TS3310.
IBM Linear Tape File System Library Edition V2.1.2
There are two levels of [Linear Tape File System], or LTFS for short. The first is the Single Drive Edition (LTFS-SDE), which allows you to attach an LTO-5, LTO-6 or TS1140 tape drive to a single workstation, and allow you to mount tape cartridges as easy as mounting USB memory sticks. This presents a full file system view that allows you to read, edit, create, and even drag-and-drop files to other file systems. The LTFS-SDE driver is available for Windows, Linux, and Mac OS.
The second is the Library Edition (LTFS-LE), which allows you to mount the entire tape library as a file system. Each tape cartridge in the library is presented as a subdirectory folder, that you can access like any file system on disk. This was only available for Linux systems, which could then export the files through NFS, FTP or HTTP protocols to other clients. Now, with release v2.1.2, LTFS-LE supports Windows servers, so that you can share the files with other clients through CIFS as well.
Wow! Since my last blog post on this, we have over 600 registrants!
Smarter Storage for Midsize Businesses
Businesses of all sizes are getting buried in the avalanche of data. Data is coming in at faster rates and in greater volumes. The value of data is increasing. Old processes and technologies aren't working. Midsize businesses have the same issues managing the rapid growth of data as large enterprises, but they don't have the same size budget or staff. They need advanced capabilities at an affordable price that are easy to implement.
Speakers for this webcast include Brian Truskowski, General Manager, IBM System Storage and Networking; Ed Walsh, Vice President of Market and Strategy, IBM System Storage; and Tommy Rickard, IBM Director, UK Storage Development.
Date: Tuesday, November 6, 2012 Time: 8:00 AM PST / 9:00AM Arizona / 11:00 PM EST Duration: 60 Minutes
[Register now!] Learn how new IBM Smarter Storage solutions can help midsize businesses tame the explosion of information and their IT budgets.
Joining the IBM executive speakers are the following:
Clay Hales, President & CEO InfoSystems Inc.
Lief Morin, President, Key Information Systems, Inc.
Vincent Louvel, Storage Mgr, Agence France-Presse (AKA AFP)
Laurent Cervera, IT Manager, Agence France-Presse (AKA AFP)
I worked with the IBM Redbooks residency team to review this paper and ensure it had the right focus. I did not want a Redpaper that just listed all of the IBM technologies available, but rather spend some effort on the business benefits, and realistic use cases with actual client examples, that help illustrate not just what a Smart Storage Cloud is, but why your business may benefit from having one, and how others have already benefited from their deployment.
To help promote this new Redpaper, my colleagues Larry Coyne and Karen Orlando filmed me talking about the book. This has been posted as a [4-minute YouTube video]. This is the first time we have promoted a Redpaper using a video, so let me know what you thinkk in the comment section below.
We have some exciting webcasts in the upcoming weeks!
Smarter Enterprises Need Smarter Storage
In this [InformationWeek webcast], my IBM colleague Allen Marin will present a brief overview of IBM Smarter Storage for the enterprise with a focus on new high-end disk and Virtual Tape solutions.
Allen will take you through the recent enhancements [announced earlier this month], highlighting how the new capabilities can address the requirements of your mission-critical applications, as well as your evolving business analytics, and cloud initiatives.
Date: Wednesday, October 24, 2012 Time: 10:00 AM PDT / 10:00AM Arizona / 1:00 PM EDT Duration: 60 Minutes
[Register now!] All registrants will get the independent Clipper Group Report - "When Infrastructure Really Matters - A Focus on High-End Storage" - free!
Smarter Storage for Midsize Businesses
Businesses of all sizes are getting buried in the avalanche of data. Data is coming in at faster rates and in greater volumes. The value of data is increasing. Old processes and technologies aren't working. Midsize businesses have the same issues managing the rapid growth of data as large enterprises, but they don't have the same size budget or staff. They need advanced capabilities at an affordable price that are easy to implement.
Speakers for this webcast include Brian Truskowski, General Manager, IBM System Storage and Networking; Ed Walsh, Vice President of Market and Strategy, IBM System Storage; and Tommy Rickard, IBM Director, UK Storage Development.
Date: Tuesday, November 6, 2012 Time: 8:00 AM PST / 9:00AM Arizona / 11:00 AM EST Duration: 60 Minutes
[Register now!] Learn how new IBM Smarter Storage solutions can help midsize businesses tame the explosion of information and their IT budgets.
I hope you can find time in your busy schedule to participate in one or both of these webcasts.
New IBM PureData Systems help clients harness data for critical insights
Well it's Tuesday, and you know what that means! IBM Announcements! Actually, it is Wednesday, but I started writing this post yesterday, and had to do some additional research to finish.
This week, IBM introduced the newest member of the PureSystems family of expert integrated systems - IBM PureData System. The new systems are designed to help clients effectively harness the massive volume, variety and velocity of information being created every day. The result? They deliver critical insights to improve business results.
The new systems are available in three different models, each optimized specifically for different workloads.
PureData System for Transactions. Optimized for transactional processing workloads such as e-commerce and built to handle large volumes of transactions with flexibility, availability, scalability and integrity. Basically, this is IBM DB2 pureScale and InfoSphere Optim features running on Linux-x86 nodes. The system comes in small, medium and large tee-shirt sizes, and can support over 100 databases. If you have DB2 applications, these can work with PureData unchanged. If your applications are based on Oracle databases, these can work with minimal changes to use PureData systems.
PureData System for Analytics. Powered by Netezza technology, this data warehouse system features built-in database analytics to quickly explore and analyze large amounts of sturctured information. This is the beefed-up version of the Netezza TwinFin 1000. IBM DB2® Analytics Accelerator for z/OS® V3.1 (IDAA) supports both the new IBM PureData System for Analytics N1001 and existing IBM Netezza 1000 systems as accelerators.
PureData System for Operational Analytics. Capable of delivering actionable insights concurrently to more than 1,000 business operations, supporting real-time decision making for businesses. This is the follow-on product to the IBM Smart Analytics System 7700 based on POWER7 nodes. This uses IBM Storwize V7000 disk systems inside.
PureData System joins the PureSystems family which also includes the PureFlex System and PureApplication System, [both announced last April]. PureSystems provide built-in expertise, integration by design and simplification through the system lifecyle, helping businesses reduce complexity, accelerate value and improve IT economics.
In a related announcement, Andy Monshaw was recently named IBM General Manager, PureFlex. Some of you readers may remember that Andy Monshaw was previously the General Manager for IBM System Storage several years ago, and was my second line manager, and I am glad to welcome him back!
A lot was announced this week, so I decided to break it up into several separate posts. This is part 3 in my 3-part series, focusing on our Tivoli Storage products.
To read the rest of the series, see:
The latest release of FlashCopy Manager now supports NetApp and IBM N series storage devices. This provides application-aware snapshots, coordinated with applications like SAP, DB2 and Oracle.
FlashCopy Manager now integrates with Metro and Global Mirror capabilities, so that application-consistent copies are available at remote sites for disaster recovery, or to off-load the FlashCopy destination copy from disk to Tivoli Storage Manager storage pools.
Tivoli Storage Manager v6.4
IBM Tivoli Storage Manager is part of IBM's Unifed Recovery Management. Here are some highlights:
Enhanced Reporting. Cognos reporting to monitor backup and archive environments.
TSM for ERP. I remember when these were called "Tivoli Data Protection" modules. We still refer to them as "TDPs". The TSM for ERP provides backup capability for SAP environments, and this latest release adds support for in-memory SAP HANA databases.
TSM for Virtualization Environments IBM TSM is famous for its patented "Progressive Incremental Backup" which is far more efficient than full+incrementals or full+differentials. IBM now extends this method to VM images. With people consolidating more and more VMs onto fewer host servers, TSM-VE now offers multiple backup streams in parallel. TSM-VE can now take application-aware backups of Microsoft Exchange, SQL Server, and Active Directory running in VMs. TSM-VE will also support vApp and VM templates. If it takes you [a day and a half to build a VMware template], you would want to make sure all that work was backed up, right?
Enhanced Security. Complex password support and improved user authentication and management by integration with Lightweight Directory Access Protocol (LDAP)
A lot was announced yesterday, so I decided to break it up into several separate posts. This is part 2 in my 3-part series, focusing on: Storwize V7000 Unified, LTO-6 tape, and the SmartCloud Virtual Storage Center.
The Storwize V7000 Unified is a product that consists of a 2U-high Storwize V7000 control enclosure that provides block-based access, combined with two 2U-high File Modules that provide file-based NAS protocols: CIFS, NFS, HTTPS, SCP and FTP. The problem was that when it was introduced, it was based on Storwize V7000 v6.3, so when the Storwize V7000 v6.4 features were announced last June, they did not apply to the Storwize V7000 Unified.
That is all fixed now, so the Storwize V7000 Unified now supports the full v6.4 features, including Real-time Compression for both file and block-based access to primary data, and Fibre Channel over Ethernet (FCoE) for block access.
The two File Modules are no longer limited to a single Storwize V7000 control enclosure, you can now connect to up to four control enclosures clustered together. Combined with up to nine expansion enclosures for additional disk raises the total maximum to 960 drives.
If you don't already have an Active Directory or LDAP server, the Storwize V7000 Unified now offers an embedded LDAP server, for smaller deployments that want to reduce the number of servers they need to purchase for a complete solution.
Like the [IBM XIV Gen3 storage system], both the Storwize V7000 and V7000 Unified now also support the OpenStack Nova-volume interface.
Lastly, if you have a Storwize V7000 v6.4, you can upgrade it to a Storwize V7000 Unified by simply adding the two File Modules. This can be done in the field.
IBM LTO-6 for tape libraries and drives
IBM introduces the sixth generation of Linear Tape Open (LTO-6) drives, which can be used as stand-alone IBM TS1060 drives, or in IBM tape libraries. As with previous models of LTO, the LTO-6 can read two older generations (LTO-4 and LTO-5) tape media, and can write to previous generation (LTO-5) tape media. You can buy the LTO-6 drives now, and use the older media until LTO-6 tape cartridges are available (hopefully later this year!)
My friend, Brad Johns, from Brad Johns Consulting, has a great post on this [LTO-6 Announcement]. While you expect the new drives to be faster with a denser tape media format, the key advantage to the LTO-6 is that it improves the compression algorithm, from the previous 2:1 to the new 2.5:1 compression ratio:
Thus, with the improved compression, the LTO-6 is 40 percent faster, with double the tape cartridge density. This can reduce backup times by 30 percent, increase the amount of data that sits in your automated tape libraries, and reduce the courier costs sending tapes off-site.
IBM SmartCloud Virtual Storage Center v5.1
Last year, IBM coined the phrase "Storage Hypervisor" to refer to the underlying technology in the IBM SAN Volume Controller (SVC) and Storwize V7000 disk systems.
At the IBM Edge conference last June, my colleague Mike Griese presented [SmartCloud Virtual Storage Center]. Back then, it was a pilot program (beta test), and this week, IBM announces that it will be formally available as a product.
The idea was simple: take the basic storage hypervisor, and add the necessary software to make it a complete solution.
If all of your disk is currently virtualized behind IBM SAN Volume Controller (SVC), or you want to put all of your data behind SVC, then SmartCloud Virtual Storage Center is for you. Basically, for one per-TB price, you get all of the following:
The software features of SAN Volume Controller v6.4, including FlashCopy, Metro Mirror and Global Mirror.
The full advanced features of IBM Tivoli Storage Productivity Center v5.1, including the Storage Analytics Engine that does "Right-Tiering", recommending which LUNs should be moved entirely from one disk system to another, based on policies and access patterns.
IBM Tivoli Storage FlashCopy Manager v3.2 which manages FlashCopy with full coordination with applications, including Microsoft Exchange, SQL Server, DB2, Oracle, SAP, and VMware. This ensures that the FlashCopy destination copies are clean, eliminating the need to run backout or redo logs to correct any incomplete units of work.
If this combination sounds familiar, it was based on IBM's previous attempt called [Rapid Application Storage] which combined the Storwize V7000 with Tivoli Storage Productivity Center Midrange Edition and FlashCopy Manager.
The key difference is that SmartCloud VSC does not include the SVC hardware itself, you buy this separately. If you want Real-time Compression, that is charged separately for the subset of TB of the volumes that you select for compression.
The job is located in Tucson, Arizona, which is a great place to live! Tucson is the headquarters for IBM storage design and development, with the largest collection of engineers, software developers and testers. The IBM Tucson Executive Briefing Center is located on the [University of Arizona Science and Technology Park] campus that houses over 7,000 employees from 50 different companies.
What does the job entail?
Primarily, you will be developing, customizing and presenting Powerpoint presentations and live product demos. For some briefings, you will work with sales reps, IBM Business Partners, and clients to develop an agenda of topics to discuss. At times, the presentation may involve working to solve the client's problems, drawing on the whiteboard or flip charts to help capture the requirements and architect a solution.
Which products are we talking about?
The [IBM System Storage product line] includes solid-state drives (SSD), block and file-based disk systems, tape drives and libraries, storage virtualization, and storage management software.
Is there any opportunity for travel?
Most of the presentations will be performed in Tucson, either in person, by webcast or video conference call. Sometimes, this includes discussions over drinks, dinner or golfing. Occasionally, there will be travel to present at client locations, IBM branch offices, events or conferences. My manager estimates approximately 10 percent travel.
Is the pay based on a commission?
Absolutely not! We are consultants, not salespeople. To maintain our "trusted advisor" status, it is a flat salary, with possibility for year-end bonus based on how well our division does overall. This allows us to present and position all of the products fairly to the clients at briefings without bias. Our clients appreciate that! The job is considered pre-sales technical support.
Is training included?
Yes. Assuming you already have a strong background in storage hardware and software, and how these connect to SAN and LAN networks for a variety of operating systems like z/OS, AIX, Windows and Linux, there will be training for the latest updates and features of the IBM products throughout the year. Also, there will be professional training to build up your public speaking and meeting facilitation skills.
How do I apply?
If you are an American citizen, fluent in the English language, and have at least a Bachelor's Degree, go to the [IBM Employment website], look for "Storage Support Specialist" position using job code "STG-0524037" or "STG-0525309". IBM is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
Last year, the Austin Executive Briefing Center had a room full of experts to help customers learn about IBM hardware to run Oracle applications. This year, IBM is back in San Francisco, with subject matter experts representing Power Systems, System x servers, PureSystems, Storage and System z mainframes. If you are in San Francisco, consider taking 1-2 hours out of your schedule to speak to IBM experts. These are intended to answer the question: Why choose IBM for your Oracle (and other) workloads?
Event: IBM Mini-Briefings Location: San Francisco Marriott Marquis, 55 Fourth Street, very close to the Moscone Center Dates: Monday through Wednesday, October 1-3, 2012
Subject Matter Experts:
Pat O'Rourke, Austin Briefing Center, Power Systems
Dennis Wunder, Poughkeepsie Briefing Center, System z mainframes
Steve Loeschorn, Raleigh Briefing Center, System x servers
Curtis Neal, Tucson Briefing Center, Storage
IBM will also have a booth presence on the main Oracle OpenWorld showroom floor. Please stop by and visit my colleagues! To sign up for a Mini-Briefing at Oracle OpenWorld, for any or all of the topics above, visit the new [IBM STG Austin EBC] website.
Many thanks to the 186 people who registered for yesterday's webcast "Solving the Storage Capacity Crisis -- Tools and Practices for Effective Management!" We had some excellent questions posed during the live Q&A:
Do you recommend moving to a SAN before implementing the management techniques you described, or will these tactics work just as well on direct-attached storage?
How does data center tiering differ from hierarchical storage management?
How do you recommend decisions about data priority be made when there are multiple stakeholders competing for attention?
You didn't mention deduplication. Does that have much impact on capacity management?
When outsourcing to a storage service provider, do you have any recommendations of the merits of wholesale outsourcing vs. partial outsourcing?
What are the dangers of giving end-users the ability to manage their own storage? What kind of education should be put in place?
The webcast was recorded, so in case you missed it, or just want to hear it again, the recording is now available in the [On24 archives].