This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
In his blog Rough Type, Nick Carr asks Where is my CloudBook?and points to John Markoff's 2-part series in the New York Times on computing in the clouds.(Read it here: Part 1, Part 2)
At first, I thought he meant computing while in an airplane, but instead, he is talking about computing on a laptop or other hand-held device that does not have an internal disk drive, no installedoperating system, no internal data storage. Instead, the idea is that you boot from a CD, accessyour data, and even some of your programs, over the internet. John used an Ubuntu Linux LiveCD in his example.
This week, I am in Sao Paulo, Brazil, and was "in the clouds" for over 10 hours flying from Dallas to here.The one time I am guaranteed "off-line" from the internet is on the plane, and I spend enough time on planesthat I am able to get work done despite being "disconnected".
The same reasons people want to get out of having a disk drive on their laptop, are the reasons data centersare getting out of internal disk on their servers.
disks crash, and typically are not protected in any RAID configuration on most laptops
operating systems get infected with viruses and malware
storage on one server is generally inaccessible to every other server
Booting from CD is especially clever. No more worrying about fixing your Windows registry, viruses,corrupted operating system files, or the cruft that accumulates on your C: drive that slowsyou down. The CD is the sameevery time, so it is like running your system with a freshly installed operating system every day.
The need for central repositories of data harkens back to the years of the IBM mainframe. Of course, whatmade sense back then continues to make sense now. The old 3270 terminals stored no data, and instead merelyprovided keyboard input and display text screen output to the vast amount of data stored on the central system.Today, the inputs are different, using your finger or mouse instead to point to what you want, sliding itacross to make things happen, and the output may now include photos, audio and video, but the concept isstill the same.
I carry my Ubuntu Linux LiveCD with me on every business trip. Combined with externally rewriteable media,such as a USB key, you can get work done even when you are in an airplane, and upload it whenyou are back on the net.
The IBM Storage and Storage Networking Symposium concludes today. As typical for manysuch conferences, it ended at noon, so that people can catch airline flights.
TS1120 Tape Encryption - Customer Experiences
Jonathan Barney had implemented many deployments of tape encryption, and shared hisexperiences at two customer locations.
The first company had decided to implement their EKM servers on dedicated 64-bitWindows servers. They had three sites, one in Chicago, Alphareta, and New York City,each with two EKM servers. Each library had a single TS3500 tape library, and pointedto four EKM servers, two local, and two remote.
The clever trick was managing the keystore. They decided that EKM-1 was their trustedsource, made all changes to that, and then copied it to the other five EKM servers.His team deployed one site at a time, which turned out to be ok, but he would notrecommend it. Better to design your complete solution, and make sure that all librariescan access all EKM servers.
This company decided to have a single key-label/key-pair for all three locations, but change it every 6 months. You have to keep the old keys for as long as you have tapesencrypted with those keys, perhaps 10-20 years.The customer found the IBM encryption implementation "elegant" and it can be easily replicated to a fourth site if needed.
The second company had both z/OS and Sun Solaris. Initially they planned to have botha hardware-based keystore on System z, and software-based keystore on Sun, but they realized that System z version was so much more secure and reliable, that it made nosense to have anything on the Sun Solaris platform.
On System z, they had two EKM images, and used VIPA to ensure load balancing fromthe library. Tapes written from z/OS used DFSMS Data Class to determine which tapesare encrypted and which aren't. All Tapes written from Sun Solaris were encryptied, written to a separate logical library partition of the TS3500, which in turn contactedthe System z for the EKM management to provide the keys to use for the encryption.
The "gotcha" for this case was that when they tested Disaster Recovery, they had torecover the two EKM servers first, before any other restores could take place, and thistook way too long. Instead, they developed a scaled-down 10-volume "rescue recovery" z/OS image that would contain the RACF database and all EKM related software to actas the keystore during a disaster recovery. Anytime they make updates, they only haveto dump 10 volumes to tape. Restore time is down to only 2 hours.
He gave this advice to deploy tape encryption:
Some third party z/OS security products, like Computer Associates Top Secret orACF2, require some PTFs to work with the EKM. The latest IBM RACF is good to go.
Getting IP support from IOS to OMVS requires IPL.
At one customer, an OMVS monitor software program killed the EKM because it wasn'tin their list of "acceptable Java programs". They updated the list and EKM ran fine.
DO not update EKM properties file while EKM is running. EKM keeps a lot of stuffin memory, and when it is recycled, copies this back to the EKM properties file, reversing any changes you may have done. It is best to shut down EKM, update theproperties file, then start up EKM back up again. This is why you should always haveat least two EKM servers for redundancy.
TSM for Linux on System z
Randy Larson from our Tivoli group presented this session.There is a lot of interest in deploying IBM Tivoli Storage Manager backup and archivesoftware on Linux for System z. Many customers are already invested in a mainframeinfrastructure, may have TSM for z/OS or z/VM, and want the newer features and functions that are available for TSM on Linux.
TSM has special support for Lotus Domino, Oracle, DB2 and WebSphere Application Servers.TSM clients can send backup data to a TSM server internally via Hipersockets, a virtualLAN feature on the System z platform that uses shared memory to emulate TCP/IP stack.
One of the big questions is whether to run Linux as guests under z/VM, or natively onLPAR. The general deployment is to carve an LPAR and run Linux natively untilyour server and storage administration staff have taken z/VM training classes. Oncetrained, they can easily move native LPAR images to z/VM guests. Unlike VMware that takesa hefty 40% overhead on x86 platforms to manage guests, z/VM only takes 5-10% overhead.
For the TSM database and disk storage pools, Randy recommends FC/SCSI disk, with ext3 file system, combined with LVM2 into logical volumes. ECKD disk and reiserfsworks too. Avoid use of z/VM minidisks. Under LVM2, consider 32KB stripes for the TSM database, and 256KB stripes for the disk storage pools. For multipathing, usefailover rather than multibus method. Read IC45459 before you activate "directio".
The TSM for Linux on z is very much like the TSM on AIX or Windows, and not like theTSM for z/OS. For tape, TSM for Linux on z does not support ESCON/FICON attached tape,you need to use FC/SCSI attached tape and tape libraries. TSM owns the library anddrives it uses, so give it a logical library partition separate from z/OS. ForSun/StorageTek customers, TSM works with or without the Gersham Enterprise Distrbu-Tape(EDT) software. Use the IBM-provided drivers for IBM tape. For non-IBM tape, TSM providessome drivers that you can use instead.
That wraps up my week. This was a great conference! If you missed it, look for the one in Montpelier, France this October. Check out the list of IBM Technical Conferencesto find others that might interest you.
The IBM Storage and Storage Networking Symposium continues ...
DS8300 Benchmark for Global Mirror
Phil Allison of Fidelity National Information Services presented his success switching from competition over to IBM DS8300 disk systems for use with Global Mirror. They had usedPerformance Associates famous PAIO driver to help to the benchmarktesting. They ran the benchmars at 2x and 3x their current workloads to see how well the DS8000 performed,measuring IOPS, MB/sec, and millisecond response time (msec). They were very impressed with their results,staying below their target 0.8 msec for most of their runs.
For the Global Mirror, the did a performance "bake-off" between Ciena CN2000 versus Cisco 9216i. These areimplemented differently. Ciena uses a Layer-2 approach, encapsulating the Fibre Channel packets directlyto transport as SDH/SONET or Gigabit Ethernet (GigE), which required dedicated circuits between JacksonvilleFlorida and Little Rock, Arkansas. By contrast, Cisco uses a Layer-3 approach, encapsulating Fibre Channelpackets within an IP packet, which can leverage existing datacenter-to-datacenter backbone.
To add stress to the benchmarks, they used a "Network Impairment" emulator. These artificially inject errors,lose packets, and other signal loss conditions. Running both Cisco and Ciena under these tests help them decide which to purchase, but also enforced that idea that they made the right choice choosing IBM for theirremote distance mirroring solution.
Comparison of Bare Machine Recovery Techniques
"Bare machine recovery" is the phrase used to restore a machine that has no operating system installed (or thewrong operating system). Dave Canan from IBM Advanced Technical Support did a great job reviewing the variousproducts and techniques available, and the pros and cons of each approach. The ones he covered were:
Tivoli Storage Manager - install fresh Windows Operating System, TSM client, and then follow certain steps
Automated System Recovery(ASR) - a new feature of Windows XP and Windows 2003 works with TSM client
Symantec Ghost - formerly callled PowerQuest Drive Image, there are now two versions: Ghost Home Edition and Ghost Corporate Solution Suite
Cristie Bare Machine Recovery(CBMR) - This is an IBM partner that provides both Linux and Windows PE versions. Cristie includes a license for Windows PE, so no need to use the alternative Bart PE method.
SAN Volume Controller - Customer Experience
Bill Giles of Catholic Medical Center, a hospital in New Hampshire, presented his experienceswith IBM System Storage SAN Volume Controller. They have a mix of IBM System x, System p, andSystem i servers, as well as machines from HP, Sun, and Dell. For applications, they havePicture Archiving and Communicatiion System (PACS) for cardiology and radiology, HL7 Interface engine, Clinical Information System, TSM for backup, and Microsoft Exchange fore-mail.
They deployed SVC on AIX, Solaris, Windows 2000 and 2003. They were very delightedwith the results:
Centralized Storage Provisioning
Consolidating disparate storage into a universal platform
Enables non-disruptive data migration
Increased utilization of existing disk resources
Improved disaster recovery with FlashCopy and Metro Mirror
Birds of a Feather (BOF) sessions
We had two BOFs, one for storage attached to System z operating systems, and another for storage attached to Linux, UNIX and Windows systems. This distinctionmade sense when mainframes could only attach to CKD disks and ESCON/FICON tape,and distributed systems could only do FCP/SCSI, but these days, there are all kindsof convergence going on.
Linux on System z can now attach via FCP to LTO tape and SAN Volume Controller, allowing now a wide range of storage options for that platform. z/OS, z/VM, z/VSEand Linux on System z can all access IBM System Storage N series via NFS.
The format was traditional Q&A panel, we had experts at the front of the room,handling the questions and discussion topics brought up by the audience. I'll spareyou the individual questions and answers.
The blog team is working on re-directs for those who don't see this in time. Depending on which RSS feed reader you use, you may need to unsubscribe/re-subscribe to re-activate. You can updatethe URL for the feed to one of these:
Continuing this week in Las Vegas, we had a great set of sessions today.
Fibre Channel Overview
I like the manner in whichJim Robinson presented this "basics" session on how Fibre Channel works, why it is spelled "Fibre" not "Fiber", and how all the different layers work in the protocol.
IBM Virtualization Engine TS7700 series
Jim Fisher from the IBM Tucson lab presented the TS7700 series, which replaces our Virtual Tape Server (VTS). Hehad performance numbers to show that it was faster in various measurements against the B20 model of the VTS. Itis supported on the z/OS, z/VM, z/VSE, TPF and z/TPF operating systems.
IBM E-mail Archiving and Storage solution
Ron Henkhaus provided an overview of IBM's E-mail Archive and Storage appliance. The solution combines IBM BladeCenter server blade, DS4200 serieswith SATA disk, and pre-installed software: IBM Content Manager, IBM Records Manager, IBM CommonStore for Lotus Domino and Microsoft Exchange, and IBM System Storage Archive Manager. Services are included to get it connected toyour e-mail environment.
Lee La Frese from our Tucson performance lab presented various performance featuresof the IBM System Storage DS8000 series, and how they compare to competition.
First, some interesting statistics.
Back in 2002, the average high-end EnterpriseStorage Server (ESS) model F20 was configured only for 4 Terabytes (TB). In 2004,the average ESS was up to 12 TB. Today, the average DS8100 is 17.4 TB and the averageDS8300 is 41.5 TB.
51 percent of DS8000 series are configured for FCP only (Linux, UNIX, Windows, i5/OS),35 percent FICON only (System z mainframe), and 14% have both mixed.
Average I/O density has stabilized to about 0.6 IOPS per GB. This means that for everyTB of business data, you can expect most applications to issue 600 Input/Output requestsper second.
While IBM SAN Volume Controller has the fastest SPC-1 and SPC-2 benchmarks, the DS8000also has good results. Looking at just the monolithic "scale-up" systems, DS8000 hasthe fastest SPC-1, and second place for SPC-2.
Compared against the EMC DMX-3, the IBM DS8000 series has superior performance.For example, comparing 2Gbps port performance on each, DMX-3 is able to do 20 IOPS perport, compared to DS8000 with 38 IOPS per port.Compared against HDS USP, the response time for 60,000 IOPS for HDS averaged 10.5 milliseconds (msec), compared to IBM DS8000 less than 6.5 msec.
There are some unique features of the DS8000 to optimize performance. Two areAdaptive Multi-stream Prefetching (AMP) which helps improve processing of databasequeries, and HyperPAV which helps on mainframe workloads.
For FATA disks, performance of sequential reads and writes is only 20 percent less than15K RPM FC disks, but a whopping 50 percent less for random access. Consider using FATAfor audio/video streaming, surveillance data, seismic recordings, and medical imaging.
Comparing 146GB 10K versus 300GB 15K from a capacity perspective was interesting.37TB of 300GB 15K had 20 percent better response time, but 25 percent less maximum throughput,than 37TB of 146GB drives. Depending on your workload, this can help decided which youchoose.
Lee also covered RAID rebuild performance. When an individual HDD fails that is part of a RAIDgroup, the DS8000 performs a rebuild onto a spare drive. A RAID-5 rebuild is processedat 52 MB/sec, compared to RAID-10 at 56 MB/sec. Rebuild processing is low priority,so any other workload will take higher priority to avoid impacting application performance.Compared to EMC, the IBM DS8000 can rebuild RAID-5 73GB 15K RPM drive in only 24 minutes, but it takes 37 minutes to do this on a DMX-3. That is 13 minutes of additional exposure where a second drive failure might cause you to lose all your data in that RAID group!
N series ILM and Business Continuity
James Goodwin from our Advanced Technical Support team presented IBM System Storage N series featuresthat relate to ILM and Business Continuity. He covered features like SnapShot, SnapLock,SnapVault and LockVault.