This week is IBM Pulse2012 conference in Las Vegas. I am not there, for medial reasons this time. While my colleagues will be spending this week sipping Margaritas and enjoying the music in between inspiring technical sessions, I will be flat on my back, getting all my nutrients from a tube connected to my arm, listening to the hospital equivalent of [Muzak].
I found a great write-up from fellow blogger Jason Buffington from ESG. Here are some excerpts from his post [IBM Pulse 2012 — Day One Keynote]:
"IBM Pulse 2012 ‘s opening keynote talked about the realities of cloud as a delivery model – without the ‘private-‘, or the ‘public-‘, or even the quotes or capitalization of “The Cloud.” It was IBM’s perspective on what IBM knows better than most, how to deliver enterprise IT services that map to strategic business goals."
"In contrast to talking about ‘data-center/cloud’ stuff and then later about ‘con
"...cloud-based delivery was ‘more than just virtualization’"
"...the US Dept of Labor stating that jobs related to technology are forecast to be among the fastest growing segment thru 2018."
Hopefully, this post will hold you over until I regain consciousness.
Most readers know thta Tucson is home of one of the largest collections of world-renowned experts on IT storage. But what you may not know, is that Tucson is also the home of experts for optical sciences. This week, I was part of a delegation of IBMers invited on a tour of the Steward Observatory Mirror Lab [SOML].
SOML was built in 1990 underneath the football stadium at the University of Arizona. Why under the stadium? Their motivation was [Chicago Pile-1], the world's first nuclear reactor, built by Enrico Fermi under the football stadium at the University of Chicago.
We got to see all aspects of the process to develop the huge mirrors used in large telescopes. SOML did not always offer lab tours. Back in 1993, two dozen members of the Earth First! terrorist organization [attacked the lab with hammers and monkey wrenches to destroy and dismantle the mirror lab]. Now, security is tight to ensure no-one damages these mirrors, some of which fetch as much as $30 million dollars.
At other mirror labs, mirrors start as a large, heavy, flat piece of glass and then ground and polished to the correct parabolic curve. SOML created a new process that works a lot better, similar to making a [Pineapple Upside Down Cake]. For those who are not familiar with this cake, you arrange sliced pineapple rings on the bottom of the baking dish, then pour the liquid cake batter that fills in and around the pineapple slices, then bake.
The first step is creating a base of 1,690 hexoganal tubes made of Aluminum Silicate. These are like the pineapple rings in the cake. The tubes are bolted to the baking dish that is 8.4 meters wide. These tubes form the base of the [parabolic shape] that focuses starlight to a small focal point. The tubes are spaced with about an inch of space in between. The Aluminum silicate feels like clay.
Once the base is built, chunks of glass are placed on the surface. Rather then pouring on the cake mix of molten glass, these chunks will be melted in place. This isn't normal glass, but a special Boron Silicate glass that does not expand or contract much during changes in temperature, made by the [Ohara Corporation] in Japan.
The oven is then lowered onto the baking dish. Once the temperature reaches 700 degrees, the entire system is then rotated at 7 RPM. This allows the glass to melt and take its parabolic shape through [centrifugal force]. The people who run the oven are called "oven pilots", and they monitor the entire process to make sure nothing goes wrong.
This particular mirror is one of the two that will go into the [Large Binocular Telescope]. The mirror will be 36 inches thick at the edges, and 18 inches in the middle. If the glass cools down to quickly, it may crack or form crystals, so instead the oven is kept in place and the temperature lowered slowly over the course of a few months. This is called annealing.
Once a mirror has annealed, 24 suction cups are glued to the top surface to pull the mirror out of the baking dish. It is then tipped on its side so that all the bolts can be removed and the hexagonal tubes washed out, leaving behind a honey-combed effect on the bottom of the mirror. This means the mirror is 80 percent air, making it strong and lightweight.
The next step is grinding the surface with diamonds. In most cases, the process of spinning creates the correct shape so little grinding is required. However, for this mirror here for the Large Synoptic Survey Telescope [LSST], about five tons of glass will be ground out of the center. This will actually have two parabolic curves, the outer curve is shallow, and the inner curve is deep. This will allow for the LSST to survey a wide area of space at a time.
Once the glass is ground to the right shape, it will be polished with Cerium Oxide, what is commonly known as Jeweler's Rouge. How smooth does it have to be? If this mirror were the size of the United States, there would be no bump higher than 2 inches tall!
Most mirrors are symmetrical, so the polishing can be done on a spinning platform, but this mirror is not. The Large Magellan Telescope will consist of seven mirrors, one in the middle that is symmetrical, and surrounded by six other mirrors that will all continue the parabolic shape in each direction. This is one of the outer mirrors, which means that each part of the polishing process will be controlled by computers to get exactly the curve required.
Here is a small scaled-down model of the Magellan Telescope. Each of the seven mirrors will be 8.4 meters wide. At this point, one person asked why all the mirrors were 8.4 meters wide. I joked that this was the size of the oven! It reminded me of [the story where newly-wed had to ask her grandmother why she cut the ends off the pot roast]. The actual reason was that the posts of the football stadium are 8.5 meters wide, so any mirror made inside the lab larger than that could not be removed easily for transportation.
The LMT will be installed on [Cerro Tololo] in Chile, where my father worked earlier in his career. Why Chile? Observatories need high altitude, dry climate and clear skies. That is why Arizona is home to many observatories, including Kitt Peak National Observatory and the Vatican Observatory on Mount Graham. Cerro Tololo in Chile is close to the equator and meets these requirements.
Once operational in 2020, it will gather 6 TB of images every evening. That got all of the IBMers on the tour very excited!
To verify the polishing is complete, it is put on three red stands and measured with a laser. Once the measurements are complete. The surface will be coated with aluminum to provide the reflective surface. You can't just paint the surface with a roller! Instead, the aluminum is vaporized and allowed to land on the surface of the mirror evenly, in a layer that is only three molecules thick. There is more aluminum in standard size beer can than on the surface of one of these 8.4 meter size mirrors!
So that was the tour. It took almost 2 hours. If you are ever in Tucson, consider contacting the SOML and arranging a tour for yourself. There is no other mirror lab like it!
The old adage applies "You can't please everyone. Presidents can't. Prostitutes can't. Nobody can." I am reminded of that as I fielded a variety of interesting comments and emails about, of all things, my choice of order of things in recent blog posts.
Certainly, there are times when the order of things matters greatly. In my now-infamous blog post [Sock Sock Shoe Shoe], I use a scene from a popular 1970's television show to explain why compression should be done before encryption.
In my case, I put things in the order that I felt made sense to me, but not everyone agrees. Here are three recent examples:
There you have it. I will gladly fix false or misleading information, but I am not going to re-arrange the order of things just to please some readers, only to have other readers complain that they liked it better in the original order. As always, feel free to comment on any of this in the section below.
I can't believe we got snow this week on Valentine's Day! It didn't last long on the ground here in Tucson, but there are still some white caps in our mountains. For those of you "trapped" by snow, or too much work, here are two upcoming events you can attend from your desk and computer!
I think both of these will be entertaining and informative. If you attend either, let me know what you think in the comments below.
Well, it's Tuesday again, and today I am announcing that we have a new IBM Storage blogger joining the Blogosphere: Raj Sharma!
Raj hails from Toronto, Canada and will be able to provide the Canadian perspective on all things Storage. I had the pleasure to meet Raj in person here in Tucson when him and dozens of his cohorts came down for a multi-customer briefing at the [IBM Executive Briefing Center] where I work.