This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
This week, I am presenting at the IBM Systems Technical University for Storage and POWER systems. This conference is being held in New Orleans, Louisiana, October 16-20, 2017, at the beautiful Hyatt Regency.
The afternoon sessions on Monday were all about Cloud.
Back in 2009, I was designated the IBM Cloud Storage Center of Competency for all of the IBM Systems client centers. That was nearly a decade ago, and I am still talking about Cloud Storage!
Since then, IBM has decided to be a "Cloud Platform" company, and now everyone wants to know about Cloud Storage. Cloud is not just to lower costs, as it once start out as, but now for innovation and business value.
Nearly all of IBM Storage is enabled for cloud, from our high-end FlashSystem, DS8000 and XIV flash and disk storage arrays, to our Spectrum Storage software suite, to our various tape products.
Building Private Cloud with Ubuntu and OpenPOWER
Ivan Dobos, from Canonical--the company that makes Ubuntu--presented Ubuntu on OpenPOWER. Other Linux distributions like Red Hat and SuSE distributions offer both a "community supported" version (OpenSUSE or CentOS), and an "enterprise version" (SLES and RHEL). Ubuntu doesn't fork their versions, they have a single version for everyone.
Ubuntu 14.04 LTS was made available as a Little-Endian distribution for IBM POWER and OpenPOWER. Ubuntu was the first Linux distribution to support CAPI and PowerKVM for the POWER8 platform.
(A note on release numbers. Ubuntu releases every April and October, so 14.04 represents 2014/April release. Every two years, a release is designated "Long Term Support" (LTS) which is supported for five years.)
Since version 16.04, Ubuntu offers the LXD Container Hypervisor, based on LXC, similar to Solaris Zones, but running as a daemon. Virtual Machines are heavy because they have their own kernel. Containers instead use the kernel of the underlying hypervisor, but limited to Linux guests. The Linux guests are can be older versions of Debian, Red Hat or SuSE, but with the latest, most secure kernel of Ubuntu for safety and security.
(Canonical gives Ubuntu away for free, but offers "Enterprise Services" for a fee to companies that want this added level of support. One of the features with Enterprise Services is "Live Kernel Update". Normally, updating the Linux kernel requires a reboot, which would cause outage to all of the VMs and containers running on that host server.)
Like VMs, you can launch containers, switch to bash shell, install software, run applications, and shut down containers, all isolated from other containers. The LXD daemon can run LXC and Docker containers. Some advantages of doing this:
Lift and Shift, live mobility from one system to another
Collocation of different workloads on same node
More efficient to use containers than Virtual Machines
14x greater density with LXD than traditional KVM or VMware (tested on x86)
Based on open source LXC containers
Ubuntu is designed for the "Elastic Hybrid Cloud". Canonical recommends combining on-premises data center with two or more public cloud providers. Scarcity has shifted from "code" to "operations". Are you ready to run applications you don't understand?
Total Cost of Ownership is shifting from code license costs to operational costs. Canonical offers a free, downloadable, operations orchestration platform called "Juju" to help install, configure and scale applications. Juju means "magic" in Swahili.
Scripts on Juju are called charms. There are Juju charms to install and configure things like MongoDB and IBM Spectrum Scale. Furthermore, Juju charms can be bundled together for more complicated deployments.
Juju is not limited to LXD, can be used with VMware, OpenStack, bare metal servers, and public clouds. It is available on Ubuntu, Red Hat and Windows. As a demo, Ivan built an entire working OpenStack environment, with 20 applications on 4 bare metal servers, all installed and launched with Juju.
For OpenStack, you can use the basic "Ubuntu OpenStack", or a more complete "Canonical OpenStack", or even have Canonical folks manage your environment for you.
Canonical MaaS (Metal-as-a-Service) uses hardware APIs to manage bare metal servers, providing physical provisioning, dynamic allocation for workloads, and even Ubuntu and CentOS operating system installs. Canonical has clients with over 100,000 servers managed with MaaS.
Introduction to IBM Cloud Object Storage System and its applications (powered by Cleversafe)
Before 2015, IBM offered two "Object Storage" products: IBM Spectrum Scale and IBM Spectrum Archive, and I was constantly having to compare and contrast IBM products to Cleversafe.
Not any more! With the IBM acquisition of Cleversafe, IBM now offers all three!
This session explained all of the features and functions of IBM Cloud Object Storage System, available as software, as pre-built systems, including a VersaStack CVD, and as Storage-as-a-Service (STaaS) in the IBM Cloud.
(IBM renamed Cleversafe DSnet to "IBM Cloud Object Storage System". I joked that if IBM ever acquired Coca-Cola, they would probably rename their signature soft drink as the "Brown Carbonated Sugar Liquid", or BroCarb SugarLiq for short!)
In the evening, we had a nice reception with food and drink at the Solution Center. The Solution Center has booths where all of the IBM and Business Partners have their experts answering questions and handing out brochures of their offerings.
This week, I am presenting at the IBM Systems Technical University for Storage and POWER Systems. This conference is being held in New Orleans, Louisiana, October 16-20, 2017, at the beautiful Hyatt Regency.
Storage: Opening Keynote Session
Clod Barrera, IBM Distinguished Engineer and Chief Technical Strategist, and Craig Nelson, Brocade, co-presented this session.
Clod Barrera presented the latest in Storage trends. He organized his talk around four layers: Infrastructure, Storage Management, Storage Systems, and Storage Media.
Craig Nelson presented the changes in Storage Networking. With advancements in both server and storage bandwidth, the storage network becomes the bottleneck. Insane flash storage performance requires insanely fast storage networks. IBM offers Brocade-manufactured switches and directors that now support 32Gbps. Combining four paths together, these can offer Interswitch Connection Links (ICL) at 128 Gbps.
The Seven Tiers of Business Continuity and Disaster Recovery
With the recent Hurricans Harvey, Irma, Jose, and Maria, my topic on Business Continuity and Disaster Recovery (BC/DR) was well attended. I have been working in BC/DR for most of my career, including the "High Availability Center of Competency" or HACOC.
Back in 2005, I was here in New Orleans, the week before Hurricane Katrina, for the IBM Storage Symposium, August 22-26, the predecessor of this conference. I left on Friday, August 26, and the storm hit that weekend.
I met with people photographing all the buildings, in hopes to sell "before pictures" to insurance companies and filmmakers after the hurricane hit. Film director Spike Lee bought much of this footage. Smart!
However, natural disasters like hurricanes, tornados and floods represent less than 20 percent of all discasters. The majority of disasters, nearly 75 percent, arise from electrical power outages, human error, system failure and randsomware.
IBM FlashSystem Overview
Andy Walls, IBM Fellow, CTO and Chief Architect,and Brent Yardley, IBM STSM and Master Inventor, co-presented this session. Andy started with FlashSystem 900, V9000 and A9000/R.
The room was packed with standing room only, and Andy was answering so many questions that he never finished his portion, and Brent Yardley never had a chance to cover his portion.
Fortunately, there were "deep dive" sessions on FlashSystem 900, V9000 and A9000/R later in the week, so Andy suggested everyone go to lunch and attend these other more detailed sessions.
IBM introduces the eight generation of Linear Tape Open (LTO) tape drive technology, with corresponding support in all of the IBM tape libraries.
Fellow blogger Jon Toigo, of Drunkendata.com fame, came to Tucson to interview Lee Jesionowski, Ed Childers, Calline Sanchez, and me about this. Check out the various segments on YouTube or his website.
The LTO-8 cartridges are not yet available, but when they are, they will hold 12 TB raw capacity, or 30 TB effective capacity at 2.5-to-1 compression ratio. The new drives are N-1 compatible to read/write LTO-7 cartridge media.
Previous generations also supported reading N-2 generation tapes, LTO-8 breaks from that tradition and will not support LTO-6 cartridges at all.
LTO-8 comes in both "Full Height" (FH) and Half-Height (HH) models. The FH models can transfer data at 360 MB/sec (or 900 MB/sec effective at 2.5-to-1 compression), and the HH models at 300 MB/sec (or 750 MB/sec effective at 2.5-to-1).
LTO-8 supports IBM Spectrum Archive and the "Linear Tape File System" (LTFS) tape format for self-describing long-term retention of data.
Compliance storage has come under many names. For tape and optical media, we had "WORM" for Write-Once, Read-Many. For disk-based storage, we had "Fixed-Content" or "Content-Addressable Storage". For file systems, we had "Immutable Storage".
Fortunately, the clever folks who crafted the SEC 17a-4 law came up with an umbrella term: "Non-Erasable, Non-Rewriteable" (NENR) that covers all storage media, from WORM tape and optical, to tamperproof flash, disk and cloud-based solutions.
The other major change is "Concentrated Dispersal" mode, or "CD mode" for short. Erasure Coding works best when data is dispersed across three or more sites. When this happens, you can lose all of the data at one site, and still have 100 percent access to all data from the other locations.
IBM's "Information Dispersal Algorithm", or IDA for short, scattered slices of data across many servers. Great for high availability and performance, but often meant that the minimum deployment was 500TB or greater.
Not every organization is ready for such a large purchase. Some want to just [dip their toe in the water] with something smaller, less expensive. Well IBM delivered!
The new CD mode means that instead of one slice per Slicestor node, you can pack lots of slices on each node. Each slice will be on distinct disk drives, for high availability.
Entry-level configurations now can be as little as 72-104 TB, across 1, 2 or 3 sites.
Next month, I will be presenting at the IBM Systems Technical University for Storage and POWER. This conference will be held in New Orleans, Louisiana, October 16-20, 2017.
Instead of a "Meet the Experts" Q&A panel, this event will feature a "Poster Session". I had the pleasure of doing one of these down in Melbourne, Australia last month. For those who missed it, here are my blog posts:
By now, you have already decided on a title and abstract of your poster. You will need to figure out a quick and easy way to explain your poster, and as always, shorter is better. It reminds me of a famous quote:
"Sorry this letter is too long...
If I had more time, I could have made it shorter!
-- Blaise Pascal
The event team asked me to write some instructions on the mechanics of how to put together a poster for this, since it is new for many people. I use Microsoft PowerPoint 2013 and ImageMagick tools to accomplish this.
Arrangement of Slides
Posters for the IBM Systems Technical University in New Orleans will be 24x36 inches in size. If you print out your poster in 8.5x11 inch standard size letter pages, that would be eight slides, 2 columns, 4 rows. This leaves one inch border all around.
The event will provide both the foam board and double-sided sticky tape. You can bring your poster as a stack of Letter-sized pages in a folder, and assemble your poster at the event.
You can increase the size of individual image to 17x22, to offer the "Big Picture" view. Basically, we can take a standard 8.5x11 Letter size page, expand it onto four separate pages, and then put them on the poster! I will show you how in the steps below.
Lastly, you can have two big slides. If your poster is organized as "Before/After" or "Problem/Solution" then this arrangement could be perfect for you.
Setting Custom Paper Size on PowerPoint
In Melbourne, I had to use European A4 standard paper, and had to figure out how to do this in PowerPoint. I was surprised to learn that the PowerPoint default is 4:3 ratio of 10x7.5 inch, and that this is stretched to be whatever paper size you print on.
The difference is slight, but I prefer [WYSIWYG], so we will change the slide to "Custom size" and force it to 8.5x11 inches, with "Landscape" orientation. This will avoid anything looking stretched or squished on the big poster.
Converting a PowerPoint Slide to PNG Image file
If you would like to resize one or more of your PowerPoint slides, you will need to save those slides as images. Select "File" and "Save As" and as the format, choose "PNG" format. You can also select GIF or JPG, but I prefer PNG.
You can export all of your slides as images, in which case it will create a folder and number each slide individually. Or, you can select "Just This One" for the current slide.
By default, it will use the same name as your PPT file, just change the extension to PNG. I suggest you name the file something meaningful to you. In my examples below, I use "small.png" as the file name.
I am using PowerPoint 2013, which defaults to 96 dpi. So, an 8.5x11 paper becomes 1056x816 pixels in size.
If you have PowerPoint 2003 or higher, you can change the Windows registry to specify image resolutions. Not recommended for the faint of heart. Or anyone else. But here's the deal if you want to try (if the following doesn't make any sense, it might be better not to mess with the registry):
Quit PowerPoint if it's running
Navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\X.0\PowerPoint\Options
(For X> above, substitute 16.0 for PowerPoint 2016, 15.0 for PowerPoint 2013, 14.0 for PowerPoint 2010, 12.0 for PowerPoint 2007 and 11.0 for PowerPoint 2003.
Add a new DWORD value named ExportBitmapResolution and set its DECIMAL value to the DPI value you want (for example, 300 means 300 dots per inch)
Close REGEDIT, start PowerPoint and test. Your files will be 3300x2550 pixels instead.
Resizing and splitting up PNG Image files
To expand and chop the slide into four letter-sized pages, we will use "ImageMagick", an open source tool you can download for free at [ImageMagick] is a collection of command line utilities. The first "identify" will confirm your pixel size for your PNG image. Replace "small.png" with whatever you named your PNG image above.
Lastly, we crop the "big.png" image we just created into four smaller pieces. Each piece will be exactly the size as your original image! The files will be named big_0.png, big_1.png, big_2.png and big_3.png.
Since the resulting four pieces are exactly the size of a page, you can put them back into your PowerPoint deck. Create four blank slides, select Insert then Pictures. Insert each picture (big_0.png, big_1.png, big_2.png, and big_3.png) as a separate page.
You can print this out, and bring with you to the event, or send it to someone to have them print for you.
Upload files to IBM@Box
This next step is completely optional, but found it adds a nice touch. As an IBMer, you can upload your presentation, and any documents, whitepapers or other materials, to [IBM@Box]. Create a directory that is unique to you, such as your last name and the conference. For example, I have "Pearson-STU-NOLA-2017" as my folder name.
You can create a "URL Link" to this folder. Select "Share", then "Share Link" to create a dialog box. It is important to specify "People with this link" if you want those outside of IBM, such as clients and IBM Business Partners, to have access.
Press the little "gear" button on the upper right, and it gives you options to customize the URL. Normally the URL is some long random sequence of characters, but you can rename it to something meaningful and easier to remember.
Generate a QR Code
Since you have a URL Share Link for your files on IBM@Box, you can generate a QR Code for this link, and include on your poster!
There are several online websites that can generate a QR Code for free. I use [QRme.com] in this example. Go to the website, copy in the URL, and press "Generate" button.
The QR Code is generated successfully, right click and "Save Image" to a file on your hard drive. This image can be inserted as a picture like we did above onto any slide. You can resize as needed.
In Melbourne, one of the posters had the QR Code at the top, with the Title, and it was impossible to see, so difficult to use a smartphone to scan the information. For this reason, I recommend putting the QR code in the center or lower right corner of your poster. Between shoulder and waist height for the audience, to be comfortable to scan.
I am looking forward to going back to New Orleans to speak at this conference!
Well, it's Tuesday again, and you know what that means? IBM Announcements!
IBM announced a new product, IBM Spectrum Protect Plus. To understand why, I will need to discuss a bit of history related to Data Protection.
(FCC Disclosure: I work for IBM. This blog post can be considered a "paid celebrity endorsement" for IBM Spectrum Protect, IBM Spectrum Protect Snapshot, IBM Spectrum Protect for Virtual Environments, and IBM Spectrum Copy Data Management products. I was not paid in any manner to promote Geoffrey Moore's book mentioned below.)
IBM Spectrum Protect was originally developed as the Workstation Data Save Facility (WDSF) back in the 1980s, back when Personal Computers were just getting deployed.
I started in 1986 developing mainframe software, so we all had bulky 3270 terminals. When our area was offered 120 PCs to replace them, I was tasked with determining how to roll these out, 24 at a time, over five months.
My job was to determine who would get a PC in the first round, the second round, and so on. I handed out a simple one-page survey, asking everyone basic questions. Are you familiar with Personal Computers? Do have one at home? Are you comfortable using a mouse? My plan was to give those most familiar with them sooner, and those less familiar in later rounds.
However, it was my final question that sealed the deal:
How soon do you want a PC to replace your 3270 terminal?
[ ]Immediately [ ]Next month [ ]No Hurry [ ]Put me last [ ]Never!
Surprisingly, I had roughly 24 folks choosing each option on this last question, which made my decision process easy for me!
(In his book Crossing the Chasm, fellow author Geoffrey Moore would come up with similar groups: Innovators, Early Adopters, Early Majority, Late Majority, and Laggards. This is a great book and I highly recommend it!)
Of course, we used WDSF to back up the files. WDSF would later morph into DFDSM, then ADSM, then TSM, and now it is called IBM Spectrum Protect.
Over the decades, the product has evolved from just backing up data on personal computers. IBM Spectrum Protect can now protect all kinds of machines, from tablets, mobile devices, and smartphones, to virtual machines, databases, and application servers in the data center.
Besides creating backup versions of files, IBM Spectrum Protect can also migrate older, less frequently used files to less expensive media, as well as archive files for long-term retention.
Different files can be assigned to different "management classes" that determine policies to be applied and enforced on the backup, migration and archive copies. For backups, this includes how many versions to keep while the file exists, how many versions to keep after the original file is deleted, how long to keep those inactive versions.
Instead of a grandfather-father-son [backup tape rotation], full-plus-incremental, or full-plus-differential scheme employed by other backup software, IBM Spectrum Protect has a unique "Incremental-Forever" approach that reduces backup time, LAN bandwidth requirements, and backup storage media.
While most companies still backup to tape, IBM Spectrum Protect can backup to flash, disk, tape, virtual and physical tape libraries, object storage, and even to public Cloud Service Providers such as IBM Bluemix, Amazon S3, and Microsoft Azure.
IBM Spectrum Protect both client-side and server-side data footprint reduction technologies including compression and deduplication, eliminating the need for expensive, single-purpose data deduplication devices like Dell-EMC Data Domain.
IBM Spectrum Protect is recognized as a leader in Data Protection software, able to scale up to meet the demands of the largest enterprises. However, the parameters and options that IBM Spectrum Protect has acquired over time have been compared to the cockpit or flight deck of an airplane!
For clients with Virtual Machines, IBM offered three solutions:
IBM Spectrum Protect Snapshot
Formerly called Tivoli Storage FlashCopy Manager (FCM), [IBM Spectrum Protect Snapshot] takes frequent, near-instant, non-disruptive, application-aware backups and restores for SAP, Oracle and Db2. It can also be used for VMware using advanced snapshot technology, on both IBM and non-IBM storage systems.
IBM Spectrum Protect Snapshot can be used as a stand-alone product, or integrated with IBM Spectrum Protect to move the snapshots and FlashCopy targets to other storage media.
IBM Spectrum Protect for Virtual Environments (VE)
Formerly called IBM Tivoli Storage Manager for Virtual Environments, [IBM Spectrum Protect VE] protects both VMware and Microsoft Hyper-V virtual machines.
IBM Spectrum Protect VE safely moves backup workloads to a centralized IBM Spectrum Protect server and enables administrators to create backup policies or restore virtual machines with just a few clicks. It allows you to protect data without a traditional backup window.
IBM Spectrum Copy Data Management makes copies available to DBAs, Developers and VM administrators when and where they need them. While this product is focused on DevOps and Dev/Test workflows, it can also be used to automate and schedule snapshots that can serve as backups.
Surprisingly, many companies do not take advantage of these solutions. Even clients who already have IBM Spectrum Protect deployed either (a) simply use Spectrum Protect clients on individual VM guests, or (b) use third-party products to backup VMs outside of Spectrum Protect infrastructure.
"Problems cannot be solved with the same mind set that created them."
-- Albert Einstein
Smaller clients want something simpler to deploy, and easier to use and administer. Rather than simplify the products above, a process called "kneecapping" in the IT industry, IBM opted for a clean slate, [start-from-scratch] approach.
The result is IBM Spectrum Protect Plus, new software that was preview announced last Wednesday in time for this week's VMworld 2017 conference in Las Vegas, and next month's VMworld conference in Barcelona, Spain.
IBM Spectrum Protect Plus is available as either a stand-alone product, or integrated with IBM Spectrum Protect for long-term protection. It is focused exclusively on VMware and Hyper-V environments. General Availability is expected some time in 4Q 2017.
Key features include:
Simple to install in less than 15 minutes, configured in an hour
Easy to use by DBA, VM or application administrator. No IBM Spectrum Protect skills required for stand-alone deployment
Pre-defined Gold, Silver and Bronze policies are ready to use. Additional customized policies can be configured as needed
Supports both application-aware and crash-consistent methods
Data Footprint Reduction technologies including compression and deduplication
Instant data recovery to support DevOps, Dev/Test, Reporting, Analytics and Training
Granular search and restore of entire Virtual Machines, VMDKs, and individual files
As for the name, I would have prefered "IBM Spectrum Protect Basic Edition". The "Plus" implies that the new product is more advanced, or offers more features, than the existing Spectrum Protect editions.