This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections Platform is now in read-only mode and content is only available for viewing. No new wiki pages, posts, or messages may be added. Please see our FAQ for more information. The developerWorks Connections platform will officially shut down on March 31, 2020 and content will no longer be available. More details available on our FAQ. (Read in Japanese.)
International Technology Group [ITG] has just published a series of papers about IBM SmartCloud Virtual Storage Center (VSC) and SAN Volume Controller/Storwize storage hypervisor virtualization technology detailing the cost benefit advantages over EMC and VMware.
IBM delivers up to 72% lower storage TCO than EMC storage virtualization and management solutions in large enterprises ... and up to 35% lower storage TCO than VMware tools in mid-sized environments
Also, you can watch an interview with the study's author, International Technology Group Managing Director, Brian Jeffery, live from next week's IBM Edge Conference in Las Vegas. Brian will be interviewed on [TheCUBE by Wikibon] on Monday afternoon. Watch it live on May 19!
I will be at Edge next week. If you plan to be there, I would be glad to discuss these ITG findings with you and your clients in person.
I am not in Las Vegas this week for this year's event, but the sessions will be streamed live through [IBM GO].
IBM Systems Technical University - May 22-26, 2017 - Orlando, FL
IBM Systems Technical University is the evolution of a variety of other conferences related to servers, storage and software. Starting out as the "IBM Storage Symposium", then added "System x" servers and renamed to "Storage and System x University", then dropped "System x" when IBM sold off that business to Lenovo.
A few years ago, it was renamed "Edge", initially just focused on Storage, but then two years ago combined with System z mainframe servers and POWER Systems for IBM i and AIX platforms. It also covers software products that previously had their own conferences, like IBM Pulse or MaximoWorld
Last year, the IBM Marketing team tried a daring experiment. Let's change "Edge" to be a "Cognitive Solutions and Cloud Platform" conference, with emphasis on IT Infrastructure.
The experiment failed. Not because IBM Systems don't support these new initiatives, but because the audience were more interested to hear about how IBM Systems help their current day-to-day business. As many attendees told me, "If we wanted to hear about Cognitive or Cloud, we have plenty of other of conferences that cover that already!"
While 40 percent of IBM revenues are generated from Cognitive Solutions and Cloud Platform, the other 60 percent are traditional, on-premise, systems-of-record application workloads, the kind that business, non-profit groups, and government agencies have been using for the past few decades!
To address this need, IBM offered three-day "IBM Systems Technical University" events at various locations. Last year, I presented storage topics at events in Atlanta, Austin, Bogota, Boston, Chicago, Dubai, Nairobi, and São Paulo.
We will have several of those this year as well. The main one will be a full 5-day event, May 22-26, in Orlando Florida. I will be there presenting various sessions on storage!
IBM World of Watson - October 29-November 2, 2017 - Las Vegas, NV
This is a Cognitive Solutions and Cloud Platform conference, with an emphasis on Analytics and Database technologies.
I did not attend World of Watson, or WoW for short, last year, but it was an evolution of the conference previously called "IBM Insight". I am sure everything from DB2 and Open Source databases to Hadoop and Spark will be covered this year as well.
In writing this post, I realize that this year will be like a "Conference Sandwich". Cognitive-and-Cloud at the top and bottom, with all the meat, veggies and garnish in the middle!
Today, IBM announced a software/server/storage combo that out-performed both HP and Sun. Here is an excerpt from the[IBM Press Release]:
IBM today announced that its recently introduced E7100 Balanced Warehouse(TM), consisting of the IBM POWER6(TM) processor-based System p(TM) 570 server, the IBM System Storage(TM) DS4800 and DB2(R) Warehouse 9.5, is already lapping the field in performance. The new data warehousing solution is now ranked number one in both performance and in price/performance in the TPC-H business:
2 x speed-up over HP system with Oracle 10g and equal number of cores;
3.17 x speed up over Sun with Oracle 10g and 38 percent price advantage;
A new world record by loading 10 terabytes (TB) data at six TB per hour (TB/hr).
"These latest benchmark results further prove IBM's strength and leadership in the business intelligence arena," said Scott Handy, vice president of marketing and strategy, IBM Power Systems. "The E7100 Balanced Warehouse is a complete data warehousing solution comprised of pre-tested, scalable and fully integrated system and storage components, designed to get customers up and running quickly to get to the real benefit of unprecedented business insight and intellect."
Those not familiar with the [IBM Balanced Warehouse], it is the productized version of DB2's ["Balanced Configuration Unit" or BCU] reference configuration. The IBM Balanced Warehouse presents a pre-tested, pre-configured solution for Business Intelligence (BI) applications. These are in the form of "building blocks" thatcan be combined to get to the size you need, with incremental growth as your business expands. Each building block expertly matches the CPU processor and RAM memory of the server, with the appropriate I/O bus, cabling, and capacity of the disk system, resulting in optimal performance.
IBM DB2 software is designed to allow you to combine multiple building blocks into a single system image. This greatly simplifies your data warehouse deployment, and can help ensure success. For example, for a 50TB deployment, you can take a base 2TB building block, add 24 more, each with 2TB of disk capacity, and have a completely balanced environment. IBM clients have built systems over 300TB in this manner with these building blocks.
The IBM Balanced Warehouse is offered in several configurations:
The [C-class models] are designed for SMB customers, employing an IBM System x server with internal or direct attached EXP3000 disk.
The [D-class models] are the next step up, offering department-level data marts and data warehouse for larger deployments, employing an IBM System x server with EXP3000 or System Storage DS3400 entry level disk.
The [E-class models] represent our top-of-the line configurations for our largest enterprise deployments. The [E6000] run Linux on an IBM System x server with System Storage DS48000 disk. The [E7000] run AIX on an IBM System p575 server with DS4800 disk. The new [E7100] mentioned above runsAIX on a POWER6-based IBM System p570 with DS4800 disk.
As I have mentioned before, in my post[Supermarketsand Specialty Shops],companies are looking for complete solutions, preferably from a single vendor like IBM, HP and Sun, rather than buying piece part components from different vendors and hoping the combined ["Frankenstein"] configuration meets business requirements.
The DS4800 is an obvious choice for this solution, providing an excellent balance of cost and performance, in a modular packaging that is ideal for the incremental growth design inherent in the IBM Balanced Warehouse philosophy. To learn more about this disk system, see the official [DS4800 website] for details, descriptions and specifications.
Wow! That can seem overwhelming. While the conference spans multiple hotels on the strip, I personally will be focusing my time at the [Mandalay Bay resort]. My session will be held at the Solutions Expo on Wednesday 1:45pm. Here are the details:
YSS-1841 IBM Cloud Storage Options
This session will cover private and public cloud storage options, including flash, disk and tape, to address the different types of cloud storage requirements. It will also explain the use of Active File Management for local space management and global access to files, and support for file-and-sync.
Program: Core Curriculum Topic: Systems Hardware Sub-topic: Storage Systems & Software
To help attendees plan your week, InterConnect has a [Session Preview Tool]. I have already found over 40 sessions related to Storage that I am interested in attending!
Well it's Tuesday again, and you know what that means? IBM announcements! Many of the announcements were made by IBM Executives at the [IBM Pulse 2014 conference].
IBM BlueMix is the newest cloud offering from IBM, providing Platform-as-a-Service (PaaS) offering based on the Cloud Foundry open source project that promises to deliver enterprise-level features and services that are easy to integrate into cloud applications.
This week, my fifth-line manager Tom Rosamilia, IBM Senior Vice President IBM Systems & Technology Group and Integrated Supply Chain made two announcements at Pulse. First, in additional to x86-based servers, SoftLayer will also offer POWER-based servers to run AIX, IBM i and [Linux on POWER] applications.
Second, SoftLayer will support PureApplication Patterns of Expertise. What is a pattern of expertise? It can be as simple as a virtual machine encapsulated in [Open Virtual Format], to more dynamic architectures, packaged with required platform services, that are deployed and managed by the system according to a set of policies.
Patterns simplify and automate tasks across the lifecycle of the application. Customers and partners alike are [seeing significant reductions in cost and time] across the application lifecycle with the deployment of a PureApplication System.
Also, this week at Pulse, Robert LaBlanc, IBM Senior Vice President of Software and Cloud Solutions, announced [IBM plans to Acquire Cloudant] which offers an open, cloud Database-as-a-Service (DBaaS) that helps organizations simplify mobile, web app and big data development efforts.
When I introduced [SmartCloud Virtual Storage Center] back in October 2012, I mentioned that it was a great solution for large enterprise that have all of their disk behind SAN Volume Controller (SVC).
To reach smaller accounts, IBM has announced two new offerings:
IBM SmartCloud Virtual Storage Entry for customers that have less than 250TB of disk behind two or four SVC nodes. It is priced per terabyte, by the amount of capacity that is virtualized.
IBM SmartCloud Virtual Storage for Storwize Family for customers that have other Storwize family products (Storwize V7000 or V5000, for example). It is priced per the number of storage enclosures that are managed by the Storwize family hardware.
Continuing my coverage of the 30th annual [Data Center Conference]. Here is a recap of more of the Tuesday afternoon sessions:
IBM CIOs and Storage
Barry Becker, IBM Manager of Global Strategic Outsourcing Enablement for Data Center Services, presented this session on Storage Infrastructure Optimization (SIO).
A bit of context might help. I started my career in DFHSM which moved data from disk to tape to reduce storage costs. Over the years, I wouuld visit clients, analyze their disk and tape environment, and provide a set of recommendations on how to run their operations better. In 2004, this was formalized into week-long "Information Lifecycle Management (ILM) Assessments", and I spent 18 months in the field training a group of folks on how to perform them. The IBM Global Technology Services team have taken a cross-brand approach, expanding this ILM approach to include evaluations of the application workloads and data types. These SIO studies take 3-4 weeks to complete.
Over the next decade, there will only be 50 percent more IT professionals than we have today, so new approaches will be needed for governance and automation to deal with the explosive growth of information.
SIO deals with both the demand and supply of data growth in five specific areas:
Data reclamation, rationalization and planning
Virtualization and tiering
Backup, business continuity and disaster recovery
Storage process and governance
Archive, Retention and Compliance
The process involves gathering data and interview business, financial and technical stakeholders like storage administrators and application owners. The interviews take less than one hour per person.
Over the past two years, the SIO team has uncovered disturbing trends. A big part of the problem is that 70 percent of data stored on disk has not been accessed in the past 90 days, and is unlikely to be accessed at all in the near future, so would probably be better to store on lower cost storage tiers.
Storage Resource Management (SRM) is also a mess, with over 85 percent of clients having serious reporting issues. Even rudimentary "Showback" systems to report back what every individual, group or department were using resulted in significant improvement.
Archive is not universally implemented mostly because retention requirements are often misunderstood. Barry attributed this to lack of collaboration between storage IT personnel, compliance officers, and application owners. A "service catalog" that identifies specific storage and data types can help address many of these concerns.
The results were impressive. Clients that follow SIO recommendations save on average 20 to 25 percent after one year, and 50 percent after three to five years. Implementing storage virtualization averaged 22 percent lower CAPEX costs. Those that implemented a "service catalog" saved on average $1.9 million US dollars. Internally, IBM's own operations have saved $13 million dollars implementing these recommendations over the past three years.
Reshaping Storage for Virtualization and Big Data
The two analysts presenting this topic acknowledged there is no downturn on the demand for storage. To address this, they recommend companies identify storage inefficiencies, develop better forecasting methodologies, implement ILM, and follow vendor management best practices during acquisition and outsourcing.
To deal with new challenges like virtualization and Big Data, companies must decide to keep, replace or supplement their SRM tools, and build a scalable infrastructure.
One suggestion to get upper management to accept new technologies like data deduplication, thin provisioning, and compression is to refer to them as "Green" technologies, as they help reduce energy costs as well. Thin provisioning can help drive up storage utilization to rates as high as you dare, typically 60 to 70 percent is what most people are comfortable with.
A poll of the audience found that top three initiatives for 2012 are to implement data deduplication, 10Gb Ethernet, and Solid-State drives (SSD).
The analysts explained that there are two different types of cloud storage. The first kind is storage "for" the cloud, used for cloud compute instances (aka Virtual Machines), such as Amazon EBS for EC2. The second kind is storage "as" the cloud, storage as a data service, such as Amazon S3, Azure Blob and AT&T Synaptic.
The analysts feel that cloud storage deployments will be mostly private clouds, bursting as needed to public cloud storage. This creates the need for a concept called "Cloud Storage Gateways" that manage this hybrid of some local storage and some remote storage. IBM's SONAS Active Cloud Engine provides long-distance caching in this manner. Other smaller startups include cTera, Nasuni, Panzura, Riverbed, StorSimple, and TwinStrata.
A variation of this are "storage gateways" for backup and archive providers as a staging area for data to be subsequently sent on to the remote location.
New projects like virtualization, Cloud computing and Big Data are giving companies a new opportunity to re-evaluate their strategies for storage, process and governance.
Marking the occasion, here is an important letter from our Vice President, Laura Guio:
May 6, 2014
To Whom it may concern
Subject: ProtecTIER Development Update:
This year marks the sixth anniversary of IBM's acquisition of Diligent Technology. Over the past six years IBM has emerged as a leader in enterprise class data deduplication. Our highly scalable, dual node hardware redundancy and gateway design are unique characteristics in the industry. IBM fundamentally believes in the importance of cost saving data deduplication technology and continues to enhance our solution, improve value and increase investment protection for our installed base.
First, it is important to note what IBM has done most recently. IBM is among the first to integrate flash technology along with deduplication to boost performance and lower cost. Integration of the IBM FlashSystem 840 for metadata was completed the day the system was publically announced. The speed of technology integration is a result of our flexible gateway design which simplifies technology adoption. It also is enabled by our global development team providing a 24x7 system design, product test and integration environment.
Secondly, IBM has recently released ProtecTIER Mainframe Edition which enables the same enterprise class deduplication capability now for IBM System z. Another distinctive feature of ProtecTIER is its ability to sustain high throughput for both read and write operations. Most deduplication methodologies have an inherent read performance penalty. Since mainframe tape operations are much more read intensive than distributed systems, we were one of the first to market with a practical deduplication offering for all mainframe tape applications.
That's just what we've done getting out of the starting blocks in 2014. Our development team continues to enhance ProtecTIER. We're also working on refreshing the entire ProtecTIER product line with new model enhancements. A new gateway design is underway which will improve performance of the existing DD5. We expect this to be available as an upgrade, providing investment protection for existing ProtecTIER clients. The SM2 product family is also being redesigned to extend its capacity range. Along with hardware changes, we will widen the disk support matrix offering enhanced flexibility and new levels of price performance.*1*
We expect 2014 to be a busy year for IBM deduplication. We have development facilities around the world in Europe, North America, Central America and Asia, working on ProtecTIER. IBM continues to market, sell, and support ProtecTIER as our strategic offering for cost-reducing deduplication technology. Any suggestion that ProtecTIER is fading away is wishful thinking by our competitors. We are working to expand our markets as we have demonstrated by our recent introduction of ProtecTIER into the mainframe. Furthermore, we are looking to expand the use cases for ProtecTIER, which can now be attached as a NAS file system, to other areas besides pure backup. We're excited about what we are delivering today and where we can provide leadership by leveraging deduplication for customer storage environments.
Vice President, Business Line Executive Storage Systems
IBM Systems and Technology Group
*1*: IBM's statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM's sole discretion. The development, release, and timing of any future features or functionality described for our products remains at our sole discretion.
To learn more about IBM ProtecTIER, consider attending the [IBM Edge conference], May 19-23, 2014 at the Venetian Hotel in Las Vegas. I'll be there to explain Data Deplication technology as part of my "Data Footprint Reduction" presentation!
IBM Master Inventor, Senior IT Architect, and Event Content Manager
Last week marked the 50th anniversary of landing a human on the moon. Over 4,000 IBM employees were involved. So much has been written about this, that I thought it would be better to point you to some articles and interviews I found of interest.
(While most people focus on the single day, July 20, when Neil Armstrong and Edwin "Buzz" Aldrin stepped foot on the moon, the entire journey lasted a week, from take off July 16, to splash down on July 24.)
"The Real-Time Computer Complex (RTCC) in Houston, Texas, was an IBM computing and data processing system at NASA’s Manned Spacecraft Center—now called the Lyndon B. Johnson Space Center—that collected, processed and sent to Mission Control information to direct every phase of an Apollo mission. The RTCC was so fast, there was virtually no time between receiving and solving a computing problem. Initially, IBM 7094-11 computers were used in the RTCC. Later, IBM System/360 Model 75J mainframes, and peripheral storage and processing equipment were used."
Those peripheral storage were IBM tape and disk systems, of course. IBM Tape systems were developed in 1952, and disk systems in 1956, in time to be used for the Apollo missions.
These were the modern forerunners of today's zSeries systems as far as their very basic systems architecture is concerned. (The IBM Z mainframe is still backward compatible with software written for the S/360, S/370, and the S/390 through machine virtualization and software emulation.)
IBM's legacy in the Space Program lives on in not just its continued involvement in NASA's current and future efforts with its computer systems and support services, but also in some of the software that was built for the Apollo program.
The IMS suite of hierarchical database management applications, which is still an important part of IBM's mainframe software portfolio, was originally designed by IBM in conjunction with Rockwell and Caterpillar so that the huge Bill of Materials (BOM) for the Saturn V, composed of hundreds of thousands of parts, could be inventoried and managed."
Chuck Yeager, test pilot who broke the sound barrier.
Alan Shepard, the first American to reach space. (Of course, Russia takes the prize of first man to orbit the earth, with Yuri Gagarin's flight back in 1961.) Later, Alan would be the first man to hit a golf ball on the moon.
Michael Collins, the third astronaut of the Apollo 11 mission. While Neil and Buzz were down on the surface of the moon, Michael kept the command module in orbit, effectively "driving around the block" to pick them up when they were ready to head home.
Chris Hadfield, a modern-day astronaut, famous for his cover of the [Space Oddity] song.
Real-time images from the moon were sent in 10-frames-per-second format to three places on earth, two in Australia and one in California. Television cameras pointed at those monitors were then used to for the live feed to the rest of the world. The live feed was also recorded in Houston Texas, to capture the best parts from each of the three sources, in case there were problems with the live feed. However, since there were no problems with the live feed, these video tapes were never used.
Years later, Gary George, a NASA intern, would purchase a whole bunch of surplus video tapes for just $218 dollars, which included three of the video tapes from Houston of the Apollo 11 landing. Today, they happen to be the only remaining recordings of the event, and [were sold last week for $1.82 Million dollars at Sotheby's auction!
This whole episode exposes the [Digital Dark Age]. Created on perishable plastic, film decays within years if not properly stored. According to [National Film Preservation Foundation], the losses are high. The Library of Congress has documented that only 20 percent of U.S. feature films from the 1910s and 1920s survive in complete form in American archives; of the American features produced before 1950, about half still exist.
To learn more on IBM's impressive capabilities to pull of projects like this, or just how to store data for long term retention, attend one of the [IBM Systems Technical University] events we have coming up in Bangkok, Sao Paulo, Johannesburg, Las Vegas, Sydney, and Prague.
This year marks the 10 year anniversary of IBM's introduction of LTO tape technology. IBM is a member of the Linear Tape Open consortium which consists of IBM, HP and Quantum, referred to as "Technology Provider Companies" or TPCs. In an earlier job role, I was the "portfolio manager" for both LTO and Enterprise tape product lines.
Today, we held a celebration in Tucson, with cake and refreshments.
IBM Executives Doug Balog, IBM VP of Storage Platform, and Sanjay Tripathi, the new IBM Director and Business Line Executive for Tape, VTL and Archive systems, presented the successes of LTO tape over the past 10 years.
To date over 3.5 million LTO tape drives, and over 150 million LTO tape media cartridges have been shipped which is a testament to the remarkable marketplace acceptance of the technology.
In honor of this event, I decided to interview Bruce Master, IBM Senior Program Manager for Data Protection Systems, about this 10 year anniversary.
10 years of LTO technology is a great milestone. How is this especially significant to IBM and its clients?
According to IDC data, IBM has held the #1 leader position in market share for total world wide branded tape revenue for over 7 years and that IBM is still #1 in branded midrange tape revenue which includes the LTO tape technologies. IBM was the first drive manufacturer to deliver LTO-1 drives, back in September 2000, the first to deliver tape drive encryption to the marketplace on LTO-4 drives, and is shipping LTO generation 5 drives and libraries. IBM is the author of the new Linear Tape File System (LTFS) specification that has been adopted by the TPCs. This file system revolutionizes how tape can be used as if it were a giant 1.5 terabyte removable USB memory stick with the capability to be accessed with directory tree structures and drag and drop functionality. With LTO's built-in real-time compression, a single tape cartridge can hold up to 3TB of data.
The Linear Tape File System has been getting a lot of attention. Where can we learn more about it?
Why is tape still a critical part of a storage infrastructure?
Tape is low cost and provides critical off-line portable storage to help protect data from attacks that can occur with on-line data. For instance, on-line data is at risk of attack from a virus, hacker, system error, disgruntled employee, and more. Since tape is off-line, not accessible by the system, it protects against these forms of corruption. LTO technology also provides write-once read-many (WORM) tape media to help address compliance issues that specify non-erasable, non-rewriteable (NENR) storage, hardware encryption to secure data, as well as a low cost long term archive media. When data cools off, or becomes infrequently accessed, why keep it on spinning disk? Move it to tape where it is much greener and lower cost. A tape in a slot on a shelf consumes minimal energy.
So tape is not dead?
Ha! Far from it. Seems like disk-only "specialty shop" storage vendors that don’t have tape in their sales portfolio are the ones that propagate that myth. In reality, storage managers are tasked with meeting complex objectives for performance, compliance, security, data protection, archive and total cost of ownership. Optimally, a blend of disk and tape in a tiered infrastructure can best address these objectives. You can’t build a house with just a hammer. IBM has a rich tool kit of storage offerings including disk, tape, software, services and deduplication technologies to help clients address their needs.
Do you have an example of a client who was saved by tape?
Yes indeed. Estes Express, a large trucking firm, was hit by a hurricane that flooded their data center and destroyed all systems. Fortunately the company survived because the night before they had backed up all data on to IBM tape and moved the cartridges offsite! The company survived and has since implemented a best practices data protection strategy with a combination of disk-to-disk-to-tape (D2D2T) using LTO tape at the primary site, and a remote global mirrored site that is also backed up to LTO tape.
So tape saved the day. What is the outlook for tape innovation in the future?
The future is bright for tape. Earlier this year, IBM and Fujifilm were able to [demonstrate a tape density achievement] that could enable a native 35TB tape cartridge capacity! This shows a long roadmap ahead for tape and a continued good night’s sleep for storage managers knowing that their precious data will be safe.
Of course, LTO tape is just one of the many reasons IBM is a successful and profitable leader in the IT storage industry. Doug Balog talked about his experiences in London for the [October 7th launch] of IBM DS8800, Storwize V7000 and SAN Volume Controller 6.1. Sanjay Tripathi showed recent successes with IBM's ProtecTIER Data Deduplication Solution and Information Archive products.
I would like to thank Bruce Master for his time in completing this interview. To learn more about IBM tape and storage offerings, visit [ibm.com/storage].
(Note: The following paragraphs have been updated to clarify the performance tests involved.)
This time, IBM breaks the 1 million IOPS barrier, achieved by running a test workload consisting of a 70/30 mix of random 4K requests. That is 70 percent reads, 30 percent writes, with 4KB blocks. The throughput achieved was 3.5x times that obtained by running the identical workload on the fastest IBM storage system today (IBM System Storage SAN Volume Controller 4.3),
and an estimated EIGHT* times the performance of EMC DMX. With an average response time under 1 millisecond, this solution would be ideal for online transaction processing (OLTP) such as financial recordings or airline reservations.
(*)Note: EMC has not yet published ANY benchmarks of their EMC DMX box with SSD enterprise flash drives (EFD). However, I believe that the performance bottleneck is in their controller and not the back-end SSD or FC HDD media, so I have givenEMC the benefit of the doubt and estimated that their latest EMC DMX4 is as fast as an[IBMDS8300 Turbo] with Fibre Channel drives. If or when EMC publishes benchmarks, the marketplace can make more accurate comparisons. Your mileage may vary.
IBM used 4 TB of Solid State Disk (SSD) behind its IBM SAN Volume Controller (SVC) technology to achieve this amazing result. Not only does this represent a significantly smaller footprint, but it uses only 55 percent of the power and cooling.
The SSD drives are made by [Fusion IO] and are different than those used by EMC made by STEC.
The SVC addresses the one key problem clients face today with competitive disk systems that support SSD enterprise flash drives: choosing what data to park on those expensive drives? How do you decide which LUNs, which databases, or which files should be permanently resident on SSD? With SVC's industry-leading storage virtualization capability, you are not forced to decide. You can move data into SSD and back out again non-disruptively, as needed to meet performance requirements. This could be handy for quarter-end or year-end processing, for example.
Well it's Tuesday again, and you know what that means! IBM Announcements!
For nearly 50 years, IBM has been leading the IT industry with its mainframe servers. Today, IBM announced its 12th generation mainframe in its [System z product family], the IBM zEnterprise EC12, or zEC12 for short. I joined IBM in 1986, and my first job was to work on DFHSM for the MVS operating system. The product is now known as DFSMShsm as part of the Data Facility Storage Management System, and the operating systems went through several name changes: MVS/ESA, OS/390, and lately z/OS. I was the lead architect for DFSMS up until 2001. I then switched to be part of the team that brought Linux to the mainframe. Both of these experiences come in handy as I deal with mainframe storage clients at the Tucson Executive Briefing Center.
Let's take a look at some recent developments over the past few years.
In the 9th and 10th generations (IBM System z9 and z10, respectively), IBM introduced the concept of a large "Enterprise Class", and a small "Business Class" to offer customer choice. These were referred to as the EC and BC models.
For the 12th generation, IBM kept the name "zEnterprise", but went back to the "EC" to refer to Enterprise Class. Rather than offer a separate "small" Business Class version, the zEC12 comes in 60 different sub-capacity levels. Many software vendors charge per core, or per [MIPS], so offering sub-capacity means that some portion of the processors are turned off, so the software license is lower. The top rating for the zEC12 is 78,000 MIPS. (I would have thought by now that we would have switched over to BIPS by now!)
If you currently have a z10 or z196, then it can be upgraded to zEC12. The zEC12 can attach to up to four zBX model 003 frames that can run AIX, Microsoft Windows and Linux-x86. If you currently have zBX model 002 frames, these can be upgraded to model 003.
The key enhancements reflect the three key initiatives:
Operational Analytics - Most analytics are done after-the-fact, but IBM zEnterprise can enable operational analytics in real-time, such as fraud detection while the person is using the credit card at a retail outlet, or online websites providing real-time suggestions for related products while the person is still adding items to their shopping card. Operational analytics provides not just the insight, but in a timely manner that makes it actionable. There is even work in place to [certify Hadoop on the mainframe].
Security and Resiliency - IBM is famous for having the most secure solutions. With industry-leading EAL5+ security rating, it beats out competitive offerings that are typically only EAL4 or lower. IBM has a Crypto Express4S card to provide tamper-proof co-processing for the system. IBM introduces the new "zAware" feature, which is like "Operational Analytics" pointed inward, evaluating all of the internal processes, error logs and traces, to determine if something needs to be fixed or optimized.
Cloud Agile - When people hear the phrase "Cloud Agile" they immeidately think of IBM System Storage, but servers can be Cloud Agile also, and the mainframe can run Linux and Java better, faster, and at a lower cost, than many competitve alternatives.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today, IBM announced its latest IBM Tivoli Key Lifecycle Manager (TKLM) 2.0 version. Here's a quick recap:
Centralized Key Management
Centralized and simplified encryption key management through Tivoli Key Lifecycle Manager's lifecycle of creation, storage, rotation, and protection of encryption keys and key serving through industry standards. TKLM is available to manage the encryption keys for LTO-4, LTO-5, TS1120 and TS1130 tape drives enabled for encryption, as well as DS8000 and DS5000 disk systems using Full Disk Encryption (FDE) disk drives.
Partitioning of Access Control for Multitenancy
Access control and partitioning of the key serving functions, including end-to-end authentication of encryption clients and security of exchange of encryption keys, such that groups of devices have different sets of encryption keys with different administrators. This enables [multitenancy] or multilayer security of a shared infrastructure using encryption as an enforcement mechanism for access control. As Information Technology shifts from on-premises to the cloud, multitenancy will become growingly more important.
Support for KMIP 1.0 Standard
Support for the new key management standard, Key Management Interoperability Protocol (KMIP), released through the Organization for the Advancement of Structured Information Standards [OASIS]. This new standard enables encryption key management for a wide variety of devices and endpoints. See the
[22-page KMIP whitepaper] for more information.
As much as I like to poke fun at Oracle, with hundreds of their Sun/StorageTek clients switching over to IBM tape solutions every quarter, I have to give them kudos for working cooperatively with IBM to come up with this KMIP standard that we can both support.
Support for non-IBM devices from Emulex, Brocade and LSI
Support for IBM self-encrypting storage offerings as well as suppliers of IT components which support KMIP, including a number of supported non-IBM devices announced by business partners such as Emulex, Brocade, and LSI. KMIP support permits you to deploy Tivoli Key Lifecycle Manager without having to worry about being locked into a proprietary key management solution. If you are a client with multiple "Encryption Key Management" software packages, now is a good time to consolidate onto IBM TKLM.
Role-based access control for administrators that allows multiple administrators with different roles and permissions to be defined, helping increase the security of sensitive key management operations and better separation of duties. For example, that new-hire college kid might get a read-only authorization level, so that he can generate reports, and pack the right tapes into cardboard boxes. Meanwhile, for that storage admin who has been running the tape operations for the past ten years, she might get full access. The advantage of role-based authorization is that for large organizations, you can assign people to their appropriate roles, and you can designate primary and secondary roles in case one has to provide backup while the other is out of town, for example.
The "Storage Resource Agent" introduced for Linux, AIX and Windows in v4.1 is a lightweight agent, written in native "C" language instead of Java, to avoid all the resources that Java consumes. In this release, it is now supported for HP-UX and Solaris, and adds file level and database level storage resource management (SRM) reporting for all five platforms.
For new customer deployments, this will eliminate all the pain setting up a "Common Agent Manager". The Productivity Center server will send out the agent, the agent collects the data, and can then optionally uninstall itself. In this manner, you always have the latest version of the code collecting the data. For those with Common Agent Manager already installed, you can continue running as is, or slowly transition over to the new lightweight agent methodology.
Full support for IBM XIV Storage System
IBM XIV® Storage System support updated to include provisioning, data path explorer and performance management reporting. Before this release, Productivity Center could only discover and provide rudimentary capacity information for XIV systems. Now you can carve LUNs and monitor XIV disk performance just like you can with most other disk systems.
Storage Area Network (SAN) configuration planning
For those who have both Productivity Center Standard Edition (SE) and Productivity Center for Replication, the SAN Config Planner is now "replication-aware" and will add LUNs to existing copy sessions, or create new copy sessions, and ensure that the devices chosen meet the appropriate criteria.
HyperSwap™ for the IBM AIX® environment
On z/OS mainframes, if you experience an outage on a storage system, Productivity Center for Replication (TPC-R) can automatically swap to the synchronous mirror copy without disruption to the operating system or application. Now, IBM has extended this awesome feature to the AIX platform for high availability in POWER-based server environments.
Detailed Session Reporting for Global Mirror
Before, TPC-R enforced the notion of only one Global Mirror master per storage system. Now, TPC-R v4.2 is capable of supporting multiple Global MIrror sessions, and provide more detailed session reporting for these environments. This can be useful if for some unknown reason the bits are not being shoveled from point A to point B, and you need to do some "problem determination".
SVC Incremental FlashCopy
Productivity Center for Replication now adds support for the "Incremental" feature of SVC FlashCopy. While FlashCopy requests are processed instantaneously, there is background processing required that can consume cycles. Incremental processing keeps track of what changed since the last FlashCopy, and minimizes this behind-the-scenes overhead.
Integrated Distributed Disaster Recovery manager
IBM Tivoli System Automation Application Manager [TSA-AM] can now integrate with TPC-R to provide application-aware disaster recovery capability. This can coordinate between IBM Tivoli System Automation for Multiplatforms [TSA-for-MP], IBM HACMP/PowerHA, as well as other clustering products like Microsoft Cluster Services (MSCS) and Veritas Cluster Services on Solaris. When TSA-AM detects an outage, it can notify Globally Dispersed Parallet Sysplex Distributed Cluster Management (GDPS-DCM) to take action. This integration was actually completed with TPC v4.1 back in April, but got buried deep inside our big storage launch, so I bring it up again as a gentle reminder that IBM offers the best end-to-end management on the planet.
At last month's Storage University, I presented an overview of [Tivoli Storage Productivity Center v4.1]. Many of the questions were along the lines of "When will TPC do xyz?" and all I could answer was "Soon" since I knew they would be delivered with this TPC v4.2 release, but I couldn't provide any more details than that at the time.
Yesterday, I promised I would cover other products from the Feb 12 announcement. Today I will focus on the IBM SAN768B director. Some people are confused on the differences between switchesand directors. I find there are three key differences:
Directors are designed to be 24x7 operation, highly available with no single points of failure or repair. Generally, all components in directors are redundant and hot-swappable, including Control Processors. In switches, some components are redundant and hot-swappable, such as fans and power supplies), but not the “motherboard” or controller. Often you have to take down a switch to make firmware or major hardware changes or upgrades.
Directors are designed to take in "blades" with different features, port counts, or protocol capabilities. You can add or remove blades while the system is up and running. Switches have a fixed number of ports. (A Small Form-factor Pluggable optical transceiver [SFP] is the component that turns electric pulses into light pulses (and visa versa). You plug the SFP into the switch, and then the fiber optic cable is plugged into the SFP).
With switches, you often start with a base number of active ports, and then can enable the rest of the ports as you need them.
Directors have hundreds of ports. Switches tend to have 64 ports or less.
Last year, Brocade acquired McDATA. Both were OEMs for IBM, and IBM distinguished that in the naming convention. The IBM SAN***B name was used to denote products manufactured for IBM by Brocade, and a SAN***M name was used to denote products manufactured by McDATA.
At that time, Brocade and McDATA equipment did not mix very well on the same fabric, so IBM retained the naming convention so that you as a customer knew what it worked with.
Brocade now has released with new levels of both operating systems--Brocade's FOS and McDATA's EOS--and their respective fabric managers--Brocade Fabric Manager (FM) and McDATA's Enterprise Fabric Connectivity Manager (EFCM)--so that they have full interoperability.
Brocade's goal is to enhance EFCM to be a common software management platform for all of their products going forward.
IBM used the maximum port count in the name to provide some clue as to the size of the switch or director. The SAN16B-2 or the SAN32B-3 are switches that have a maximum of 16 and 32 ports. The SAN256B supports a maximumeight blades of your choosing.Two different types were supported for FC ports, a 16-port blade and a 32-port blade.If all eight were 32-port blades then the maximum was 256 ports, hence the name. But then Brocade began offering 48-port blades. Should IBM change the name? No, it decided to leave itthe SAN256B even though it can now have a maximum of 384 ports.
Not to confuse anyone, the SAN768B also has a maximum of 384 ports, in the same 14U dimensions, but with a special twist. Normally to connect two directors together you use up ports from each, in what are called "inter-switch links" (ISL).These are ports you are taking away from availability from the servers and storage controllers. The SAN768Boffers a new alternative called "inter-chassis links". Each SAN768B has two processing blades, and each has two ICL ports, so with just four two-meter (2m) cables, you get the equivalent of 128 FC 8 Gbps ISL links without using 128 individual ports on each side. That is like giving you 256 ports back for use with servers and storage!
Since IBM directors require 240 volt power, IBM TotalStorage SAN Cabinet C36 include power distribution units (PDUs). PDUs are just glorified power strips, but a new intelligent PDU (iPDU) option introduces additional intelligence to monitor energy consumption for customers looking to measure, and perhaps charge back, energy consumption to the rest of the business. You can stack two SAN768B in one cabinet, one on top of the other, and connected via ICLs, it wouldlook like one huge 768-port backbone.
As a backbone for your data center, the SAN768B is positioned for two emerging technologies:
8 Gbps Fibre Channel (FC)
The SAN768B is powerful enough to have 32-port blades run full speed on all ports off-blade without oversubscription. Oversubscription is an emotional topic.
Normally, blades (like switches) can handle all traffic at full speed without delays provided the in-bound and out-bound ports involved are all on the same blade. In a director, however, if you need to communicate from a port on one blade to a port on a different blade, it is possible that off-blade traffic might be constrained or delayed in its transit across the backplane.
On the SAN768B, both the 16-port and 32-port blades can run at full 8 Gbps speed, and the 48-port is exposed to oversubscription only if you have more than 32-ports running at full 8 Gbps transferring data off-blade concurrently.
The new 8 Gbps SFPs support auto-negotiation at N-1 and N-2 generation link speeds. This means that they will automatically slow down when communicating with 4Gpbs and 2 Gbps devices, but they cannot communicate with 1 Gbps devices. If you are still using 1 Gbps devices in your data center, you will need to use 4 Gbps SFPs (which also support 2 Gbps and 1 Gbps link speeds) to communicate with those older devices.
Basically, this new technology enables transport of Fibre Channel packets over 10 Gbps Ethernet links. This 10 Gbps Ethernet can also be used to carry traditional iSCSI and TCP/IP traffic. FCoE introduces new extensions to provide Fibre Channel characteristics, like being lossless, and offering consistent performance. The ANSI T11 team is driving FCoE as an open standard, and at the moment it is not fully baked. I suggest you don't buy any FCoE equipment prematurely, as pre-standard devices or host bus adapters could get you burned later when the standard is finalized.
The idea is that FCoE blades can be installed in a SAN768B along with traditional FC blades, allowing routing of traffic between traditional FC and new FCoE ports. Those who have invested in FCIP for long distance replication will be able to continue using either FC or FCoE inputs.
One of the big drivers of FCoE is IBM BladeCenter. Currently, most BladeCenter blades support both Ethernet and FC connectivity and are connected to both Ethernet and FC switches on the back of each BladeCenter chassis. With FCoE, we have the potential to run both FC and IP traffic across simpler all-Ethernet blades, connecting through all-Ethernet switches on the backs of each chassis.
For more information on the IBM SAN768B, see the [IBM Press Release]. For more detailson Brocade's strategy, here is an 8-page white paper on their[Data Center Fabric] vision.
Well, it's Tuesday again, and you know what that means? IBM Announcements! After much needed vacation in Cancun Mexico, Lake Havasu and Sedona, Arizona, I am glad to be back at work! This week, I was visiting clients in the Los Angeles area.
IBM FlashSystem 9100
IBM's latest addition to its lineup of All-Flash Arrays is the FlashSystem 9100.
There are actually two models: the 9110 (model AF7) has 8-core processors, and the 9150 (model AF8) has 14-core processors. Both models are 2U 19-inch shelves with 24 drives on the front, with two control node canisters in the back. The term "FlashSystem 9100" applies to both 9110 and 9150 models.
Each canister has two processors, 64GB to 768GB of cache memory, an on-board 1GbE port for management, four 10GbE ports for Ethernet, and three HIC slots for I/O adapters, which can be any mix of quad-port FC cards, dual-port 25GbE Ethernet cards, or 12Gb SAS cards for expansion drawers.
For drives, you can have any mix of FlashCore Modules (FCM) or Industry-Standard NVMe (ISN) drives. The FlashCore modules are similar to the FlashCore boards in the FlashSystem 900, including Variable-Striped RAID, advanced flash management, heat binning, health separation, hardware-embedded encryption and compression.
These FCM are packaged into standard NVMe SSD form-factor, with 4.8, 9.6 and 19.2 TB capacities. The Industry-Standard NVMe drives come in 1.92, 3.84, 7.68 and 15.36 TB capacities to offer additional price/capacity options to clients.
A fully maxed out twenty-four FCM module system at 19.2TB represents approximately 400TB usable capacity, combined with 5:1 data footprint reduction with deduplication and compression, can provide up to an effective 2PB in as little as 2U of rack space!
The NVMe and FlashCore technology truly accelerates performance. Latencies as low as 100 microseconds are 2.5x lower than competitive offerings. Each control enclosure can deliver up to 2.5 Million IOPS, and a four-way cluster up to 10 million IOPS in just 8U!
You can mix and match FCM and ISN drives in the same controller, but FCM and ISN have to be in their own separate RAID groups. To use Distributed RAID6 (DRAID6), you need at least six drives for this.
IBM has made a "Statement of Direction" that these models are NVMe-OF hardware ready and will support both FC-NVMe and NVMe-OF over Ethernet by year end. Part of this involves changes to server-side software, including various operating systems, device drivers, and multi-pathing drivers.
The FlashSystem 9100 support up to 40U of expansion drawers, over 12Gb SAS, in two sizes. A 2U drawer for 24 SFF drives, and 5U for 92 SFF/LFF drives. Each FlashSystem 9100 can support up to 760 drives. These expansion drawers are not NVMe, so the Solid-State Drives (SSD) inside them use standard SAS. Consider using Easy Tier sub-LUN automated tiering to move fast data up to the FCM/ISN drives, and slower data to these SAS-based SSD.
Even though it doesn't have a "V" in its name, the FlashSystem 9100 runs Spectrum Virtualize, so you can also virtualize other storage behind it. Over 400 different storage devices from leading storage vendors are supported. The FlashSystem 9100 can be virtualized behind SVC or FlashSystem V9000.
FlashSystem 9100 can also cluster with Gen2 and Gen2+ models of the Storwize V7000 and V7000F controllers. You can connect up to four of any of these into a single cluster, supporting up to 3,040 drives.
The FlashSystem 9100 offers all of the features you have come to love from the rest of the Spectrum Virtualize products: data deduplication and compression, encryption, high-availability guarantee, data footprint reduction guarantee, hardware refresh option after three years, storage utility pricing, and IBM Storage Insights support.
IBM has no plans to withdraw either the existing FlashSystem V9000 nor the Storwize V7000/F models anytime soon. They continue to be available for purchase.
To complement the hardware features of the FlashSystem 9100, IBM has come up with three Multi-cloud solutions.
Multi-Cloud Solution for Data Reuse, Protection and Efficiency - this combines Spectrum CDM with Spectrum Protect Plus to take snapshots of volumes on FlashSystem 9100. These snapshots are not just for data protection, but can also be "reused" for other purposes, like dev/test, DevOPS, or analytics.
Multi-Cloud Solution for Business Continuity and Data Reuse - combines Spectrum CDM with Spectrum Virtualize in the Public Cloud, allowing you to take snapshots to the IBM Cloud for disaster recovery. The snapshots can be used in the cloud, or copied back to the same or different data center.
Multi-Cloud Solution for Private Cloud Flexibility and Data Protection - combines IBM Cloud Private, Spectrum CDM, and Spectrum Connect to support client's efforts to re-factor their applications with Docker containers and Kubernetes. IBM FlashSystem 9100 can be used as persistent storage for containerized applications.
This release applies only to the Storwize V7000/F and the new FlashSystem 9100 models, and provides support for iSCSI Extensions over RDMA (iSER) on the 25GbE NIC cards. If you want to cluster existing Storwize V7000/F models to the new FlashSystem 9100 models, you need all of them to be at least v8.2.0 release.
Lower latencies and higher bandwidth requirements can be addressed by using RDMA to implement iSCSI. iSER is a new interconnect protocol that allows iSCSI to run on top of RDMA technology. RDMA can be implemented by using RoCE (RDMA over Converged Ethernet) or iWARP (Internet Wide-area RDMA Protocol). iSER enables iSCSI to run on top of it regardless of which of these technologies is used underneath.
The "Storage Utility" pricing available for many of IBM's other products has been extended to include the IBM FlashSystem 9100 and IBM Cloud Object Storage.
Basically, this is a variable-priced usage-based lease. Let's say you lease 500TB of capacity, but only use 150TB, the first few months you only pay for 150TB, a bit later, you use more, and now start paying more monthly, say 200TB. The price can go up or down. At the end of the lease, typically 36 or 60 months, you have a choice: give the equipment back, or pay the difference.
Well, it's Tuesday again, and you know what that means? IBM Announcements!
Back in 2007, my blog post [Double Happy Wedding] compared IBM's acquisition for a company that produced data migration software to the practice in Japan of waiting until the bride is five to seven months pregnant to have a wedding. In USA, these are called "shotgun" weddings.
I was in Japan when I wrote that, and the company IBM acquired was Japanese, so the comparison stuck.
Today, IBM announces the latest versions Transparent Data Migration Facility z/OS v5 [TDMF] and z/OS Dataset Migration Facility v3 [zDMF] software products.
(Where better to commemorate this event than in Pigeon Forge, Tenessee, the capital of shotgun wedding venues! Including, and I am not making this up, a replica of the [grand staircase of the Titanic]. Yes, you can book this for a shotgun wedding, while your guests re-arrange the deck chairs. I stopped at a local McDonald's to submit this blog post.)
TDMF software allows you to migrate CKD volumes that are attached to your System z mainframe, including those that are actively being used by applications. zDMF allows you to migrate z/OS data sets, including those currently open by applications.
The migration is hardware-agnostic, supporting CKD volumes on IBM, EMC and HDS disk systems. As many clients are migrating from EMC and HDS disk systems to IBM DS8870, this is a good time to look at TDMF and zDMF to help make the process as transparent as possible.
Of course, if you are not interested in acquiring the software to do this yourself, you can hire IBM Data Mobility Services, which uses TDMF and zDMF to do it for you!
Well, it's Tuesday again, and you know what that means? IBM Announcements!
Enhanced Spectrum Virtualize software
IBM announces v8.1 of the Spectrum Virtualize software that works with the latest models of SAN Volume Controller, Storwize and FlashSystem V9000 products.
This v8.1 release will not support older hardware. For these older models, continue to use v7.8.1 release until end of service and support:
SAN Volume Controller, CF8 and CG8 models
FlashSystem V840, AC0 model
Storwize V7000 Gen 1, models 1xx, 2xx and 3xx
Storwize V5000 Gen 1, models 24 C/E, 12 C/E
Storwize V3500 and V3700, all models
Hot Spare Node
Higher availability provided by automatically swapping a spare node into the cluster if the cluster detects a failing node. Following the N-port ID Virtualization (NPIV) features introduced in previous release, this new feature is available for SVC and FlashSystem V9000.
Spare nodes can also be extremely helpful with code updates and node refreshes. Update the code load on a spare node, and use this to roll forward the other nodes. In this manner, you are never in "single node" mode!
You can have up to four spare nodes per SVC cluster, and three spare nodes per FlashSystem V9000 cluster. These spares are "site-aware" to support Enhanced Stretch Cluster and HyperSwap configurations.
This feature requires Fibre Channel switches, so it won't work if you are using direct-attached SAS, iSCSI or FC point-to-point connections.
256 GB memory support
Spectrum Virtualize will now take full advantage of system memory, rather than just the first 64 GB. A fixed 12 GB is set aside for write cache, the rest is used for operating system code, read cache, and compression work space.
IBM supports up to 128 GB per canister on the Storwize V7000 Gen2+ models, and up to 256 GB for SAN Volume Controller SV1 and FlashSystem V9000 models.
One two-socket nodes, IBM previously dedicated specific cores to perform I/O operations, and others for Real-time Compression. With v8.1 release, the team implemented a more sophisticated multi-socket, multi-core, multi-threaded approach. Internal tests showed this improved performance 36 to 50 percent on SAN Volume Controller DH8 and SV1 models.
Enhancements for Encryption
IBM Security Key Lifecycle Manager (SKLM) support has been expanded to support up to three Key Server clones for a total of four Key Servers (one master and three clones).
You can use both central key management (SKLM servers) and local key management(using USB keys physically attached to the back of the controllers) at the same time. This can be useful to transition from one method or another, or use both concurrently for added flexibility.
Both SKLM and USB-based keys can also be used to encrypt FlashCopy targets written to the Cloud with Transparent Cloud Tiering.
Remote support assistance
IBM support engineers can perform system or upgrade recoveries over secure support sessions. This enables remote concurrent upgrades to be done securely and is only available only for clients who purchase Enterprise Class Support.
Since you are already sending periodic inventory updates as part of "call home" support, you might as well let IBM review the configuration and provide customized recommendations!
There is no additional cost, and this provides an additional review to catch any potential problems, single points of failure, or other issues that could be a problem later on.
Based on the success of the Hyper-Scale Manager GUI developed for the FlashSystem A9000, the new Spectrum Virtualize GUI offers an updated look and feel, with new fonts, colors, banner, navigation, dashboard, and other interactive elements.
New Pause Feature for Concurrent Code Update (CCU)
The Pause function will allow users to pause CCU indefinitely. This pause allows customers to do any problem determination, such as multi-pathing issues, or simply to pause the upgrade, take a break for lunch, then resume the upgrade when convenient to do so.
There were also enhances to the hardware models themselves.
IBM FlashSystem V9000
The IBM FlashSystem V9000 has two enhancements. First, there is an option to add a pair of AC3 nodes without AE2 enclosures to scale performance.
The second is the ability to add a single AC3 node for use as a hot spare node. You can have up to three of these extra AC3 spares per V9000 cluster.
IBM Storwize V7000
IBM Storwize V7000 Gen2+ offers increased cache of up to 256 GB per controller, 128 GB per canister. This follows on the heels of the recent increase to 256 GB per node for the SAN Volume Controller and FlashSystem V9000. More memory means more cache hit ratios for faster performance, and more compressed volumes.
900 GB 15K rpm 2.5-inch SAS drive
IBM SAN Volume Controller (SVC) and Storwize Family delivers an additional option with a 900 GB 15K rpm 2.5-inch SAS drive.
(Honestly, I didn't think we would see larger capacity 15K drives, but IBM was qualifying these for the DS8000 boxes, and made sense to add them to the Spectrum Virtualize hardware offerings as well.)
Well, it was Tuesday again, and we had quite a lot of announcements here at IBM this week!
Over 1,800 clients attended the [Live February 5 webcast]! The announcements were all part of IBM's SmartCloud Storage portfolio. Here are the highlights:
STN7800 Real-time Compression Appliance
Back in October 2010, IBM announced the acquisition of Storwize, Inc., renaming its NAS-compression units to the IBM Real-time Compression appliances. Some folks were confused, so I had a blog post [IBM Storwize Product Name Decoder Ring].
IBM initially offered two models:
The [STN6500 model] had 16 Ethernet ports 1GbE (16x1GbE) and a pair of four-core processors.
The [STN6800 model] had either eight 10GbE ports (8x10GbE), or four 10GbE plus eight 1GbE ports (4x10GbE+8x1GbE). It has a pair of six-core processors.
Now, IBM offers the [STN7800 model], which can replace either of the ones above, offering 16x1GbE, 8x10GbE, and 4x10GbE+8x1GBE port configurations. It has a pair of eight-core processors to handle more robust Cloud Storage environments. See [Announcement Letter 113-012] for more details.
New XIV Gen3 model 214
With its awesome support for VMware, the XIV is often chosen for Cloud storage. The new XIV model 214 now offers up to a dozen 10GbE ports, or you can stay with the 22 1GbE ports available on previous models. These can be used for iSCSI host attachment and/or IP-based replication.
IBM strives to make each new model of every storage device more energy efficient than the last.
The new XIV model is no exception. The original XIV, introduced in 2008, consumed 8.4 kVA fully loaded. The XIV Gen 3 model 114 consumed 7.0 kVA. This new model 214 consumes only 5.9 kVA!
It has been almost three years since my now infamous post [Double Drive Failure Debunked: XIV Two Years Later]. Back then, the XIV offered only 1TB and 2TB drives, with rebuild time for 1TB drive of less than 30 minutes, and for 2TB less than 60 minutes.
The new XIV Gen3 software 11.2 release, available for both the 114 and 214 models, can now rebuild a 2TB drive in less than 26 minutes, and a 3TB drive in less than 39 minutes. There is also support specific to Windows Server 2012 including thin provisioning, MSCS, VSS, and Hyper-V. See [Announcement Letter 113-013] for more details.
SmartCloud Storage Access
IBM is the first major storage vendor to offer a product of this kind, so understanding it may be a bit difficult.
The concept is simple. Rather than having end-users having to ask IT every time they need some storage space, IBM created a self-service portal that frees up the IT department to work on more important transformational projects.
This is basically what people can do with "Public Cloud" storage service providers, so basically IBM is now giving you the capability with your "Private Cloud" storage deployment.
Here is the sequence of events. End users point their favorite web browser to the self-service portal, and login using their credentials stored in your Active Directory or LDAP server database.
Once validated, the end-user now can request new storage space, expanding their existing space, or returning the space to the IT department. For new storage requests, users can have a choice of storage classes, -- such as Gold, Silver and Bronze-- defined in the Tivoli Storage Productivity Center (TPC), either stand-alone or in the SmartCloud Virtual Storage Center.
But wait! Do you want to give every end-user a blank check to provision their own storage? Most IT staff are horrified at the thought.
Knowing this, IBM has included an option to put in an approval process, based on the end-user and the amount of capacity requested. The approver can be the cloud administrator, or someone delegated for approvals, known as an environment owner.
For some users, policies may restrict the storage classes as well. For example, Fred can only have Silver or Bronze, but not Gold.
Once the approval is obtained, TPC then issues the appropriate commands to the appropriate SONAS or Storwize V7000 Unified device. SmartCloud Storage Access can do this for thousands of storage devices across dozens of geographically dispersed locations.
Before, the Cloud Admin had to configure storage pools of managed disks, define file systems, dole out file sets to hundreds or thousands of users with hard quotas, and then configure shares based on the protocols required, like CIFS, NFS, HTTPS, etc.
With SmartCloud Storage Access, the Cloud admin still defines the pools and file systems, but then lets the self-service capability of the software to create the file sets, set the quotas and configure shares with the appropriate protocols. This greatly reduces the work on the IT staff, and greatly improves the turn-around time for end-user requests to get exactly what they want, when they need it.
The next time you withdraw money from an ATM machine, fill up your gas tank at the self-service gas station, then serve your own salad at the salad bar and fill up your own soft drink at the fast food restaurant, you will realize and appreciate that SmartCloud Storage Access is a brilliant move for the IT staff.
Cloud administrators, environment owners, and end-users can all use SmartCloud Storage Access to monitor and report on storage usage.
Well, it's Tuesday, and you all know what that means... IBM announcements!
This week, IBM announced the IBM Tivoli Storage Productivity Center for Disk Midrange Edition, affectionately referred to as "MRE". This is basically TPC for Disk but with two key differences:
A special license that covers only DS3000, DS4000, DS5000 series, whether natively attached or virtualized behind SAN Volume Controller.
A new pricing model based on the number on controllers and drawers, rather than by TB managed. For example, if you have a DS5300 and two expansion drawers, then you pay for three units of MRE. As you upgrade from smaller capacity disks to larger capacity disks, your license costs won't increase. This eliminates the quarterly hassle to "true up" your software licenses to match actual capacity that is required on TB-based licensing.
Well, it's Tuesday again, and you know what that means? IBM Announcements!
This week, IBM announces the second generation of Storwize V5000 flash and disk storage systems. There are the V5000F All-flash configurations, as well as the V5000 that can support a variety of flash and spinning disk drives.
There are three models:
The V5010 has dual 2-core/2-thread processors and 16GB of cache. It supports thin provisioning, FlashCopy, Easy Tier, and remote mirroring. The base unit includes 1 GbE Ethernet ports for iSCSI host connectivity, with options to add 16GB Fibre Channel, 12Gb SAS, and 10GbE iSCSI/FCoE as well.
The 2U controllers and expansion enclosures can hold either 24 small 2.5-inch drives, or 12 larger 3.5-inch drives. A single control enclosure has two active/active IBM Spectrum Virtualize nodes, and can attach up to 10 expansion enclosures for a maximum of 264 drives.
The V5020 unit has dual 2-core/4-thread processors and up to 32GB of cache. It supports everything the V5010 does, plus encryption. The encryption is done via the Intel AES-NI instruction set to eliminate the need for special "self-encrypting drives" (SED) that other storage devices may require.
The V5030 has dual 6-core/4-thread processors and up to 64GB of cache. It supports everything the V5010 and V5020 do, plus Real-time Compression and external virtualization. The Real-time Compression can achieve up to 80 percent space savings, representing a 5:1 compression ratio.
Each control enclosure can attach to 20 expansion enclosures, which can support 504 internal drives per controller, and up to 1,008 with two controllers (four Spectrum Virtualize nodes) clustered together. This is in addition to the drives in external storage systems virtualized.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today also happens to be [Election Day] in the United States, and some have questioned IBM's logic of making major storage announcements on Election Day. During the campaigns, a major theme was to help Small and Medium size businesses, because these are the engines of economic growth and improved employment.
Hopefully, you all saw today's Launch Webcast on these announcements, but in case you missed it, waiting in line at the polling station to cast your vote, or caught without electricity or Internet access from [Superstorm Sandy], it is now available [On-Demand].
The 2U control enclosure can have up to four additional 2U expansion enclosures, for a maximum of 120 drives, or 180TB of raw disk capacity. Like the Storwize V7000, the Storwize V3700 supports a [large number of servers and operating systems.]
Many of the features you already know from the Storwize V7000 are carried forward:
1GbE iSCSI + 8GbFC
8GbFC, 10GbE iSCSI/FCoE, Statement of Direction for 6Gb SAS
8GB per canister
4GB per canister, upgradeable to 8GB
Up to 4 control enclosures in a clustered system, each with up to 9 expansion enclosures
Up to 4 expansion enclosures
Maximum Number of drives/TB
Up to 120 drives/180TB
RAID levels supported
GUI, CLI, SMI-S API
GUI, CLI, SMI-S API
Internal (included), external (optional)
Internal only (included)
Non-disruptive data migration
One-directional (migrate to Storwize V3700, included)
Statement of direction
Up to 256 targets (included)
Up to 64 targets (included) Statement of Direction for optional 2,040 targets
Metro Mirror and Global Mirror (optional)
Statement of Direction (optional)
The IBM Storwize V3700 is offered at attractive leasing options through IBM Global Financing.
IBM LTO-6 drives and midrange tape libraries
Last month, IBM's [Tape and Storage Hypervisor Announcements] included LTO-6 for the enterprise-class TS3500 tape library. Today, the LTO-6 support is complete with support for midrange tape drives and libraries.
There are two tape drive models. The TS2260 is based on the half-height drive, intended for occasional 9-to-5 usage. The TS2360 is based on the full-height drive, intended for 24x7 access. These drives can read LTO-4 and LTO-5 tape cartridge media, and can write LTO-5 cartridge media. The new LTO-6 tape cartridge media is expected to be available next month.
In addition to the IBM TS3500 Enterprise Tape Library, LTO-6 is now supported on all of the midrange tape libraries: TS2900, TS3100, TS3200 and TS3310.
IBM Linear Tape File System Library Edition V2.1.2
There are two levels of [Linear Tape File System], or LTFS for short. The first is the Single Drive Edition (LTFS-SDE), which allows you to attach an LTO-5, LTO-6 or TS1140 tape drive to a single workstation, and allow you to mount tape cartridges as easy as mounting USB memory sticks. This presents a full file system view that allows you to read, edit, create, and even drag-and-drop files to other file systems. The LTFS-SDE driver is available for Windows, Linux, and Mac OS.
The second is the Library Edition (LTFS-LE), which allows you to mount the entire tape library as a file system. Each tape cartridge in the library is presented as a subdirectory folder, that you can access like any file system on disk. This was only available for Linux systems, which could then export the files through NFS, FTP or HTTP protocols to other clients. Now, with release v2.1.2, LTFS-LE supports Windows servers, so that you can share the files with other clients through CIFS as well.
Well, it's Tuesday again, and you know what that means? IBM Announcements! I am here in New York for the exciting news!
(FCC Disclosure: I work for IBM. This blog post can be considered a "paid celebrity endorsement" for the IBM z14 mainframe and DS8880 Storage System.)
In support of the [IBM z14] mainframe announcement, IBM has also disclosed R8.3 enhancements for the DS8880 Storage System. Here is a quick recap:
New Tier-1 Flash Capacities available for HPFE Gen2 drawers
IBM introduces the new Tier-1 flash card capacity 3.84 TB flash card. In the past, IBM DS8880 only supported Tier-0 cards that support 10 Drive Writes per Day (10 DWPD), with capacities 400, 800, 1600 and 3200 GB. The Tier-1 flash card only handles 1 DWPD, often dubbed "Read-Intensive" devices, but can actually handle about 90 percent of most production workloads.
zHyperLink™ drastically reduces the latency between the IBM z14 mainframe and the DS8880 storage systems. Traditional FICON paths through SAN switches or directors introduced about 140 to 175 microseconds of latency between systems. This new system is a direct cable, with 20 microsecond latency.
The I/O bays on the DS8880 used for HPFE Gen2 already have zHyperLink ports on them. This direct cable is limited to 150 meters, however, so plan accordingly.
Transparent Cloud Tiering
IBM already announced Transparent Cloud Tiering to IBM Bluemix, IBM Cloud Object Storage and the IBM TS7760 virtualization engine in R8.2.3 release. The new Release 8.3 of DS8880 now adds support for Amazon S3, providing yet another choice for where to migrate data sets to. IBM also adds replication, allowing the data set to be migrated to two separate target locations, for added availability, much like writing to separate ML2 tape cartridges.
Cascading FlashCopy is a feature that has existing for awhile now on IBM XIV and SAN Volume Controller platforms, so this is just a port of that concept over to the DS8880 microcode. Now, if you FlashCopy target can become the source of a follow-on FlashCopy request. You can make copies of copies. This applies to both the volume and data set level functions.
Why would anyone do this? Well, you might suspend your application at midnight and create a clean FlashCopy of a 24-by-7 ever-changing database. Then in the following morning, workers who need a static "midnight version" of the database now can use this as their source and perform additional FlashCopy requests for their own needs.
IBM DS8880 MES Support
MES is an abbreviation for "Miscellaneous Equipment Specification", one of the many Three Letter Acronyms [TLA] that doesn't help knowing what the words stand for. In short, an MES is a formal supported option to upgrade a piece of hardware that is already installed and running at a client location. IBM will offer MES to upgrade existing DS8880 systems to have the additional HPFE Gen2 drawers, and to upgrade the I/O bays to support zHyperLink connections.
(Final note: you might notice the change in upper and lower case. The IBM z14 (lower case) refers to the specific mainframe model, consistent with its predecessors the z13 and z13s, but the family name "IBM z Systems" has been shortened to "IBM Z®" (upper case). IBM Storage Systems and IBM POWER Systems were already upper case, so the mainframe guys just wanted to follow suit. I suspect "IBM i" will remain lower case, however.)
IBM introduces the eight generation of Linear Tape Open (LTO) tape drive technology, with corresponding support in all of the IBM tape libraries.
Fellow blogger Jon Toigo, of Drunkendata.com fame, came to Tucson to interview Lee Jesionowski, Ed Childers, Calline Sanchez, and me about this. Check out the various segments on YouTube or his website.
The LTO-8 cartridges are not yet available, but when they are, they will hold 12 TB raw capacity, or 30 TB effective capacity at 2.5-to-1 compression ratio. The new drives are N-1 compatible to read/write LTO-7 cartridge media.
Previous generations also supported reading N-2 generation tapes, LTO-8 breaks from that tradition and will not support LTO-6 cartridges at all.
LTO-8 comes in both "Full Height" (FH) and Half-Height (HH) models. The FH models can transfer data at 360 MB/sec (or 900 MB/sec effective at 2.5-to-1 compression), and the HH models at 300 MB/sec (or 750 MB/sec effective at 2.5-to-1).
LTO-8 supports IBM Spectrum Archive and the "Linear Tape File System" (LTFS) tape format for self-describing long-term retention of data.
Compliance storage has come under many names. For tape and optical media, we had "WORM" for Write-Once, Read-Many. For disk-based storage, we had "Fixed-Content" or "Content-Addressable Storage". For file systems, we had "Immutable Storage".
Fortunately, the clever folks who crafted the SEC 17a-4 law came up with an umbrella term: "Non-Erasable, Non-Rewriteable" (NENR) that covers all storage media, from WORM tape and optical, to tamperproof flash, disk and cloud-based solutions.
The other major change is "Concentrated Dispersal" mode, or "CD mode" for short. Erasure Coding works best when data is dispersed across three or more sites. When this happens, you can lose all of the data at one site, and still have 100 percent access to all data from the other locations.
IBM's "Information Dispersal Algorithm", or IDA for short, scattered slices of data across many servers. Great for high availability and performance, but often meant that the minimum deployment was 500TB or greater.
Not every organization is ready for such a large purchase. Some want to just [dip their toe in the water] with something smaller, less expensive. Well IBM delivered!
The new CD mode means that instead of one slice per Slicestor node, you can pack lots of slices on each node. Each slice will be on distinct disk drives, for high availability.
Entry-level configurations now can be as little as 72-104 TB, across 1, 2 or 3 sites.
Well, it's Tuesday again, and you know what that means? IBM Announcements!
IBM ProtecTIER TS7650G model DD6 supports File System Interface (FSI)
The IBM ProtecTIER Data Deduplication appliance (TS7620) and gateway (TS7650G) support three protocols used by major backup software products:
VTL - Virtual Tape Library. Originally, backup software products were designed exclusively to work with tape drives and libraries. To introduce disk-based storage and data deduplication, the easiest way was for disk-based systems to pretend to be a tape library. Hence, "Virtual Tape Library" acts just like a physical tape library.
OST - OpenStorage Technology API, a proprietary interface used exclusively by the Veritas NetBackup software to talk to disk-based backup repositories.
FSI - File System Interface, which are your familiar NAS interfaces like NFS and SMB (formerly known as CIFS). Some backup software like Commvault Simpana are optimized for NAS storage pools.
In the past, FSI was limited to the single-controller models. This is because having an active/active file system sharing was very complicated to implement.
In the new DD6 dual-controller model, you can now run two independent FSI instances, each controller owns its own set of files. To learn more, see the IBM Press Release [IBM ProtecTIER DD6 supports FSI].
IBM TS3000 System Console enhancements
The Tape Storage System Console (TSSC) is a console that allows administrators to manage up to 24 systems in tape libraries (such as TS3500 and TS4500) and virtual tape systems (such as TS7720T and TS7650G). The new features include:
Error-initiated problem reporting, often called "Call Home" support, with staged, error-specific data gathering for support
Automatic wellness checking
Remote services such as remote monitoring support and call-in capability with authenticated access through a modem or broadband, including file transfers and multiple connections with attached systems
IBM offers two sets of products for entry-level and midrange disk systems:
Storwize V7000 and V5000 products are optimized for random-access workloads like Virtual Machines (VMs), Databases, Email and other Online Transaction Processing (OLTP).
The DCS3860 and DCS3700 are optimized for sequential throughput, like video streaming, batch processing or big data analytics.
Prior to this announcement, the DCS3700 and DCS3860 supported 4TB and 6TB Nearline 7200 rpm drives, and 800GB and 1.6TB Solid-State Drives (SSD). Obviously, it doesn't make sense to offer SSD on sequential-oriented solutions. To align better with this worldview, IBM is discontinuing the SSD options, and adding a new 8TB Nearline drive option.
IBM Spectrum Control Advanced Edition and IBM Virtual Storage Center
Earlier in my career, I was the chief architect of what is now called IBM Spectrum Control. If you still have IBM Tivoli Storage Productivity Center (TPC) Standard Edition V4.x products, you can now migrate to IBM Spectrum Control Advanced Edition V5.2 by ordering a trade-up part number through Passport Advantage.
IBM Virtual Storage Center (VSC) Entry uses a per-TB pricing model. This is a discounted version of VSC "Classic" for those with four or fewer SAN Volume Controller (SVC) node pairs, and 500 TB or less managed storage capacity per enterprise.
I love Hollywood movies where the main character joins the [Witness Protection Program]! For those not familiar, this is when a person witnesses a horrible or obscene crime. To protect the witness from the criminals, the US Government would change your name, create a new identity, and move you to a new city until the trial is over. While this hides the witness from the bad guys, it also means losing touch with all your friends and family.
I mention this because every time IBM renames an existing product, modifies the code to meet IBM standards, translate to other international languages, and all the other activities needed to [assimilates the product into the IBM "Borg"], it is very similar to joining the Witness Protection Program.
(Internally, we refer to this renaming and assimilating as "blue-washing", not to be confused with the traditional definition of "bluewash" -- To tout a corporation's commitment to social responsibility, and to use this perception for public relations and economic gain; to present a humanitarian front in this manner, which IBM also does. See this article [Sesame Workshop and IBM Watson Team Up to Advance Early Childhood Education] for an example.)
Last November 2015, [IBM acquired Cleversafe] for $1.3 Billion US dollars because Cleversafe has the brand name recognition as the #1 Object Storage vendor the past two years in a row (2014 and 2015). Unfortunately, Cleversafe has "witnessed" a huge rise in obscene profits and revenues, and is now joining the "Witness Protection Program".
Renaming Cleversafe software, pre-built appliance hardware, and related cloud services to [IBM Cloud Object Storage System] is like someone acquiring the Coca-Cola company and renaming their namesake soft drink product to "Brown Carbonated Sugar Liquid", which adults might shorten to "Bro-Carbo" and the kids would nickname "Sugar-Liq".
(FCC Disclosure: I work for IBM. This blog post can be considered a "paid celebrity endorsement" for IBM Storage products. I have no financial interest in the Coca-Cola Company, CBS Television, Paramount Pictures, or Warner Bros. I have no knowledge of any IBM's future plans in acquiring any beverage-based manufacturing or bottling companies. I use Coca-Cola® merely as a well-recognized brand for illustrative purposes.)
Honestly, I don't know if "IBM Cloud Object Storage System version 3.8" offers any new features over "Cleversafe 3.7", or if the numbering change was just to help avoid confusion with existing v3.7 clients.
The IBM 3592 Tape Controller Model C07 which provides FICON access for mainframe attachment did not meet the Restriction of Hazardous Substances [RoHS] directive. This is the directive to not have lead-based paint or other hazardous substances in the paint, plastic or other materials in IT equipment.
IBM had a tough business choice. Either fix it, or stop selling it. Our mainframe clients just don't use physical tape anymore. Instead, IBM offers IBM Virtual Tape Systems (TS7720, TS7720T and TS7740) as well as the IBM ProtecTIER TS7650G Mainframe Edition.
In journalism, this is called [burying the lede]. IBM has combined the world's fastest storage, IBM FlashSystem 900, with IBM FlashSystem® A9000/A9000R Software V12.0, based on IBM Spectrum Accelerate and XIV v11 software technology.
This new software has many of the features you love from IBM Spectrum Accelerate and XIV, but adds excellent data footprint reduction. First, we eliminate repeated patterns, then apply data deduplication, and finally apply advanced compression.
This combination works great for Virtual Desktop Infrastructure, Virtual Machines for traditional applications, and even databases. Since this applies to all data, the models are priced based on their "effective capacity" based on 5.26x reduction. Different data dedupes or compresses at different rates. Your mileage may vary.
Two models were announced:
FlashSystem A9000 - This is an 8U rack-optimized solution that has three 2U x86 servers combined with a 2U drawer of FlashSystem 900 with a nice bezel on the front. This can fit into any standard 19 inch rack. Since FlashSystem offers 1.2TB, 2.9TB and 5.7TB IBM Microlatency modules, the FlashSystem A9000 is offered in 60TB, 150TB and 300TB effective capacities. Performance is at least 250 microsecond latency, up to 4.5 GB/sec throughput and 50,000 IOPS.
FlashSystem A9000R - The "R" on the end refers to "Rack". Instead of something that slides into an existing rack, the A9000R is a free-standing 19-inch wide rack with two to six flash enclosures. Each flash enclosure will have two x86 servers running the IBM FlashSystem A900R Software v12.0, and one FlashSystem 900 drawer. IBM offers both 150TB and 300TB effective capacity per flash enclosure, based on the 2.9TB and 5.7TB IBM Microlatency modules. Performance is at least 250 microseconds, up to 18 GB/sec throughput and 2 million IOPS.
Some have called these new models the "All-Flash" version of XIV, in much the same way that the FlashSystem V9000 is the all-Flash version of SVC. That is a reasonable analogy.
Jamie Thomas, IBM General Manager of Storage and Software Defined Environments
Jamie announced [IBM Elastic Storage], a new offering that is available as a software defined storage solution, based on IBM's General Parallel File System (GPFS) technology already deployed at 45,000 installations.
IBM Elastic Storage provides a global name view across data center locations. It can manage up to a Yotabyte of information, combining Flash, disk and tape resources. It supports OpenStack interfaces, Hadoop and standard POSIX file system conventions.
IBM Elastic Storage provides automated tiering to move data from different storage media types. Infrequently accessed files can be migrated to tape and automatically recalled back to disk when required. Unlike traditional storage, it allows you to smoothly grow or shrink your storage infrastructure without application disruption or outages.
IBM Elastic Storage software can run on a cluster of x86 and/or POWER-based servers, and can be used with internal disk, commodity storage, or advanced storage systems from IBM or other vendors.
IBM partnered with various clients in different industries in a special beta program. Jamie led a client panel to discuss their experiences with IBM Elastic Storage:
Alan Malek, Director of IT, Cypress Semiconductor.
"Total cycle time is key". Over the past 31 years, they bought whatever file storage was available. Now, with IBM Elastic Storage, the performance was very consistent for their engineering workloads with full load balancing.
Russell Schneider, Principal Storage Consultant, Jeskell.
Russell's company works with a lot of federal agencies, "Big Data has become Bigger Data". For example, research on Global Warming and Climate Change requires a large amount of storage across agencies.
In another example, when the tsunami hit Japan a few years ago, an agency here in the USA realized they had 14PB of data stored as a single copy in a data center at sea level less than a mile from the coast. They realized they needed to have a secondary copy, and an option to cache to a third location depending on regional disasters.
Matthew Richards, Products, OwnCloud.
For those not familiar with OwnCloud, it provides a Dropbox-like file sharing service, but in the Enterprise, with on-premise storage. It has been fully tested and certified with IBM Elastic Storage to provide a secure file sharing platform.
With IBM Elastic Storage, they were able to scale linearly up to 20,000 users, and are now testing 100,000 users. The need to have intelligent access to files at scale is what Matthew likes about IBM Elastic Storage.
Dr. Michael Factor, IBM Distinguished Engineer at IBM Research
Michael started out explaining there are three areas for storage: block, file and object. The fastest growing type of data is unstructured fixed content with associated metadata. This is ideal for object storage. Michael has been working with OpenStack Swift, an open source interface defined for object storage. He defined "storlets" as follows:
Storlets extend an object store by moving computation to the data -- filtering, transforming, analyzing -- instead of bringing data to the computation.
Storlets have been deployed on a variety of European Union research projects. For example, in partnership with Phillips, a pathology storlet can count the number of cancer cells in an image. By bringing the computation to the data, it eliminates having to transfer large amounts of data over the network.
Storlets can run on-premise and on IBM's SoftLayer IaaS cloud offering.
Bruce Hillsberg, IBM Director of Storage Systems at IBM Research
Bruce led another panel discussion, this time of IBM storage experts:
Vincent Hsu, IBM Fellow and CTO of Storage.
The problem is the isolation of data into "storage silos". Isolation causes problems in managing large amounts of data at scale, and costs more as storage is not fully utilized. IBM Elastic Storage brings everything together, eliminating storage silos.
Michael explained how IBM works with clients all over the world to ensure that storage solutions meet client requirements. For example, storlets can be used to use rich metadata to manage photographs, and display them based on GPS satellite location, or other content that makes it easier to manage these images.
IBM Elastic Storage will support OpenStack Cinder and Swift interfaces. IBM is a platinum sponsor of OpenStack foundation, and is now its second most prolific contributor, with hundreds of full-time employees working on this.
Tom Clark, IBM Distinguished Engineer, Chief Architect, Storage Software, Cloud & Smarter Infrastructure.
Storage Management is a critical piece of Software Defined Storage. This is done in three ways:
The use of analytics to optimize the deployment of storage, based on workload requirements. Storage admins set policies, and then IBM Elastic Storage analytics gather metrics and then optimize data placement and movement based on these policies. IBM Elastic Storage has 70 percent lower TCO that competitive offerings.
The focus on backup services. Backups are not just for data protection, but rather can be used to duplicate or replicate data for testing, for training, and for other purposes. IBM Elastic Storage is fully supported by IBM Tivoli Storage Manager.
Being able to support Hybrid Cloud environments, where some data can be on-premise, and other data off-premise. Storage Management challenges will need to deal with this possibility. IBM Elastic Storage is well positioned for this.
Carl Kraenzel, IBM Distinguished Engineer, Director of Watson Cloud Technology and Support.
Watson is ground-breaking technology, and IBM Elastic Storage technology was at the heart of the Watson that was first introduced in 2011.
To consider IBM Elastic Storage based on lower-cost and higher-scalability is not the full picture. Rather, this is an important platform for Cognitive Computing, which we are just at the tip of the iceberg in exploring. IT systems need to be aware of the context of what we are doing.
While the Grand Challenge demonstration on Jeopardy! was exciting, it is time we stop playing games and apply IBM Elastic Storage to business, to help with health care and medical research, and other problems in society. IBM has already deployed this at Anderson Cancer Center and Memorial Sloan Kettering Cancer Center, for example.
Tom Rosamilia provided closing remarks. IBM Elastic Storage is not just for new workloads in Cloud, Analytics, Mobile and Social (CAMS) but also traditional workloads as well. IBM Elastic Storage provides "data democracy" and allows for "better rested storage administrators" that make fewer mistakes.
Tom opened the floor for questions from the audience:
Q1. Data integrity, not just security but also quality? IBM Elastic Storage has end-to-end data integrity checking built-in.
Q2. How does IT transition from full control to auto-pilot? IBM allows you to tap into existing storage. This is not rip-and-replace. With storage virtualization, IBM hides the complexity that normally requires full control over specific assets.
Q3. Storage admins would rather have a root canal without Novocaine than move their data. What is IBM doing to offer automation to help storage admins move to this new infrastructure? IBM storage virtualization breaks that hard link between applications and specific storage devices. IBM Elastic Storage eliminates application downtime previously associated with data movement.
Tom Rosamilia assured the audience that IBM is fully committed to its storage portfolio. IBM Elastic Storage is not just about the profoundness of what IBM announced today, but also where IBM is investing in the future of storage.
Oh my, it is Tuesday again, and you know what that means? IBM Announcements!
This week, IBM announced its latest storage arrays in its IBM System Storage DS8000 series: the DS8880 models. Similar to the "Business Class" vs. "Enterprise Class" distinctions of the DS8870, IBM announced two new models, the DS8884 and the DS8886.
All of the new DS8880 models are based on the latest IBM POWER8 processors, and are noticeably thinner! These are now standard 19-inch wide, fitting nicely into standard IBM racks alongside most other standard 19-inch rack equipment.
The DC-UPS that used to be on the side are now at the bottom of each frame, taking up 8U of space. The High Performance Flash Enclosures (HPFE) that formerly were stored vertically above the DC-UPS will be stored horizontally with the rest of the HDD and SSD drives.
The DS8884 will have 6-core controllers, up to 256 GB Cache, 64 ports that can negotiate between 16Gbps and 8Gbps, up to 240 drives in a single-rack configuration or 768 drives in a three-frame configuration, and up to 120 flash cards in HPFEs. The performance of this one is equal or better to existing DS8870 systems.
The DS8886 will have 8-core, 16-core and 24-core controllers, offering up to three times the performance as the previous DS8870 models, with up to 2 TB of Cache, 128 ports, up to 1,536 drives across five frames, and up to 240 flash cards in HPFEs.
Field model conversion from DS8870 to DS8886 is available for existing clients with DS8870 Enterprise Configurations. This will let clients move their existing HDD, SSD, HPFE and Host Adapters over to the new DS8880 models.
In previous DS8000 models, clients would have one Hardware Management Console (HMC) inside the array, and an optional second HMC workstation somewhere else for high availability. While the second one was optional, it was always considered best practice to have it for redundancy sake. In the new DS8880 models, you can have both HMC in the array, and the Keyboard/Video/Monitor (KVM) can select between the two.
The new I/O enclosure pairs are four times faster, supporting six Device Adapters and two HPFE connections over PCIe Gen 3 network, the fastest available in the industry.
Lastly, IBM simplified the licensing of software features into three bundles, based on TB total capacity of Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes:
Base function License: Logical Configuration support for FB, Operating Environment License, Thin Provisioning, Easy Tier® automated sub-volume tiering, and I/O Priority Manager.
Copy Services License: FlashCopy®, Metro Mirror, Global Mirror, Metro/Global Mirror, z/Global Mirror (XRC), z/Global Mirror Resync, and Multi-Target PPRC.
z-Synergy Service License: Parallel Access Volumes (PAV), HyperPAV, FICON® attachment, High performance FICON (zHPF), and IBM z/OS® Distributed Data Backup (zDDB).
IBM also provided a "Product preview", announcing plans for a third member of the DS8880 family in 2016 that will be flash-optimized to provide an all-flash, higher performance storage system model.
Well, it's Tuesday, and that means IBM announcements!
IBM kicks EMC in the teeth with the announcement of System Storage Easy Tier, a new feature available at no additional charge on the DS8700 with the R5.1 level microcode. Barry Whyte introduces the concept in his [post this morning]. I will use SLAM (sub-LUN automatic movement) to refer generically to IBM Easy Tier and EMC FAST v2. EMC has yet to deliver FAST v2, and given that they just recently got full-LUN FAST v1 working a few months ago, it might be next year before you see EMC sub-LUN FAST v2.
Here are the key features of Easy Tier on the DS8700:
Sub-LUN Automatic Movement
IBM made it really easy to implement this on the DS8700. Today, you have "extent pools" that can be either SSD-only or HDD-only. With this new announcement, we introduce "mixed" SSD+HDD extent pools. The hottest extents are moved to SSD, and cooler extents are moved down to HDD. The support applies to both Fixed block architecture (FBA) LUNs as well as Count-Key-Data (CKD) volumes. In other words, an individual LUN or CKD volume can have some of its 1GB extents on SSD and other extents on FC or SATA disk.
Entire-LUN Manual Relocation
Entire-LUN Manual Relocation (ELMR, pronounced "Elmer"?) is similar to what EMC offers now with FAST v1. With this feature, you can now relocate an entire LUN non-disruptively from any extent pool to any other extent pool. You can relocate LUNs from an SSD-only or HDD-only pool over to a new Easy Tier-managed "mixed" pool, or take a LUN out of Easy Tier management by moving it to an SSD-only or HDD-only pool. Of course, this support also applies to both Fixed block architecture (FBA) LUNs as well as Count-Key-Data (CKD) volumes.
This feature also can be used to relocate LUNs and CKD volumes from FC to SATA pools, from RAID-10 to RAID-5 pools, and so on.
What if you already have SSD-only and HDD-only pools and want to use Easy Tier? You can now merge pools to create a "mixed" pool.
Before this announcement, you had to buy 16 solid-state drives at a time, called Mega-packs. Now, you can choose to buy just 8 SSD at a time, called Mini-packs. It turns out that just moving as little as 10 percent of your data from Fibre Channel disk over to Solid-State with Easy Tier can result in up to 300 to 400 percent performance improvement. IBM plans to publish formal SPC-1 benchmark results using Easy Tier-managed mixed extent pool in a few weeks.
Storage Tier Advisor Tool (STAT)
Don't have SSD yet, or not sure how awesome Easy Tier will be for your data center? The IBM Storage Tier Advisor Tool will analyze your extents and estimate how much benefit you will derive if you implement Easy Tier with various amounts of SSD. Those clients with R5.1 microcode on their DS8700 can download from the [DS8700 FTP site].
It's Tuesday, and you know what that means? IBM Announcements! This week I am in beautiful Orlando, Florida for the [IBM Systems Technical University] conference.
This week, IBM announced its latest tape offerings for the seventh generation of Linear Tape Open (LTO-7), providing huge gains in performance and capacity.
For capacity, the new LTO-7 cartridges can hold up to 6TB native capacity, or 15TB effective capacity with 2.5x compression that for typical data. That is 2.4x larger than the 2.5TB catridges available with LTO-6. Performance is also nearly doubled, with a native throughput of 315 MB/sec, or effective 780 MB/sec effective capacity with 2.5x compression. The LTO consortium, of which IBM is a founding member, has published the roadmap for LTO generations to LTO-8, LTO-9 and LTO-10.
IBM will offer both half-height and full-height LTO-7 tape drives. All the features you love from LTO-6 like WORM, partitioning and Encryption carry forward. These drives will be supported on a variety of distributed operating systems, including Linux on z System mainframes, and the IBM i platform on POWER Systems.
The Linear Tape File System (LTFS) can be used to treat LTO-7 cartridges in much the same way as Compact Discs or USB memory sticks, allowing one person to create conent on an LTO-7 tape cartridge, and pass that cartridge to the next employee, or to another company. LTFS is also the basis for IBM Spectrum Archive that allows tape data to be part of a global namespace with IBM Spectrum Scale.
LTO-7 will be supported on the TS2900 auto-loader, as well as all of IBM's tape libraries: TS3100, TS3200, TS3310, TS3500 and TS4500. You can connect up to 15 TS3500 tape libraries together with shuttle connectors, for a maximum capacity of 2,700 drives serving 300,000 cartridges, for a maximum capacity of 1.8 Exabytes of data in a single system environment.
In addition to LTO-7 support, the IBM TS4500 tape library was also enchanced. You can now grow it up to 18 frames, and have up to 128 drives serving 23,170 cartridges, for a maximum capacity of 139 PB of data. You can now also intermix LTO and 3592 frames in the same TS4500 tape library.
For comptability, LTO-7 drives can read existing LTO-5 and LTO-6 tape cartridges, and can write to LTO-6 media, to help clients with transition.
Well, it's Tuesday again, and you know what that means? IBM Announcements!
IBM Cloud Object Storage Gen2
Today, I want to look at a recent announcement around IBM Cloud Object Storage. On May 14th, IBM announced the [IBM Cloud Object Storage Gen2] hardware offerings, with a planned General Availability of June 7th so the timing is perfect to look at them. This announcement has benefits around performance, capacity and cost for the platform.
This enhancement to the platform takes the best of the current Cloud Object Storage architecture and extends it to allow for newer technologies, components, and approaches. These modifications incorporate new features, functionalities, and capabilities in an easily manageable manner. The same Cloud Object Storage software runs the same on both existing and new generation hardware. Clients can intermix past and present generations of hardware in the same storage pool and cluster.
As a part of this announcement, the IBM Cloud Object Storage Gen2 hardware brings with it a new COS Manager (Model M10), a new Accessor node (model A10) and a new SliceStor Controller Node (Model C10) which are all provided using the same physical 1U server that can be configured to suit as fit for purpose.
The Gen2 hardware leverages the latest Intel Xeon processors, new SAS controllers, and more options around high speed memory RDIMMs. Interestingly, provides the ability to implement an architecture that has a higher capacity in fewer rack units (RUs).
Previously, the SliceStor node was a single server with both controller and internal storage capacity. Now, a SliceStor is a new controller node, with externally-attached disk enclosures. This new approach is more elegant, in that the new server node becomes a common building block and now there are options around the disk enclosure. The disk enclosure options, small, medium and large, are listed in the table below to highlights the differences in capacity, density and drive options.
Disk enclosures (models J10, J11, and J12
Capacity enclosures (rack space/disks)
Slicestore Total Rack Space (Controller + Capacity Rack)
Drive sizes (TB)
4, 8, 12
4, 8, 12
4, 8, 12
Node raw capacity (min/max TB)
The combination of the new architecture with industry standard components results in an initial system that achieves up to 15% more GETs and PUTs per second as the previous generation of hardware.
The new Cloud Object Storage Gen2 hardware can also reduce CAPEX expenditures on new hardware models up to 25%-50% compared to the prior generation.
For more information on that see your IBM Business Partner or IBM Specialist.