This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections Platform is now in read-only mode and content is only available for viewing. No new wiki pages, posts, or messages may be added. Please see our FAQ for more information. The developerWorks Connections platform will officially shut down on March 31, 2020 and content will no longer be available. More details available on our FAQ. (Read in Japanese.)
Well, the weather here has turned awful, so I better turn off my computer to avoid lightning-strike damage.
For those looking for something to do to enjoy the "4th of July" US Independence day holiday tomorrow, thereis the [Team America: Sing-a-long at Tucson's Loft Cinemaat 6pm, you can still see the fireworks after the show is over. I did this last year and it was a lot of fun.
Also, you can check out the IBM Wimbledon build on Second Life. Here's the SLURL:[http://slurl.com/secondlife/IBM%207/133/180/23].Several IBMers will be "in world" at this virtual location on 4th of July. For all of my readers looking to check out Second Life, see what IBM can do, or talk to people who are familiar with this technology, here's your chance.
As for me, I'll be spending my "long weekend" in an airplane. Here's my travel schedule.
July 7-11: Tokyo, Japan - business meetings with IBM sales reps
July 13-18: Mumbai, India - business meetings with IBM business partners
If you will be at any of these locations on any of these dates and want to meet up, please let me know.You can click on the "send e-mail to Tony Pearson" button on the right panel of my blog.
(I was hoping that while I was in Asia, I could stop over and visit the schools I helped in Nepal and my friends at the Open Learning Exchange [OLE Nepal] as part of the One Laptop PerChild [OLPC Nepal] program, but I did not get all my ducks lined up for this with the appropriate travel approvals, visas and logistics. My apologies to Bryan, Sulochan and the rest of the team. Perhaps next year!)
This week I am off to Budapest, Hungary, for business meetings. It is the closest major city to IBM'smanufacturing plant in a small town called Vac (rhymes with "knots") where the IBM System Storage DS8000 seriesand SAN Volume Controller are assembled.
Christopher Carfi on his Social Customer Manifesto blog has a great post[Let's Look at the Big Picture]that talks about Information as the new form of "money" by looking at how the concept of "money" wasfirst formed 150 years ago. Here's an excerpt:
Lesson 1: "Money" was very fragmented for a very long period of time after the colonization of North America
"Money" as we think of it in the form of cash/paper currency has only been around for about 150 years. Over a period of almost two hundred years both before and after that time, a number of fragmented methods were used to exchange value.
Lesson 2: Everybody needs to win
After the ideas of "cash" and "checks" had taken hold and become widespread, there were still many inefficiencies in the system. Cash is cumbersome, and subject to loss. Checks may bounce. This continued until the mid-1900's.
Enter the credit card.*
The credit card resonated with both customers and vendors because both parties received benefits.
Now, the widespread usage of credit cards was not something the occurred overnight. Instead, it was something that occurred over a generation. In 1970, only 16% of American households had credit cards. However, by 1995, that number had climbed to 65%.
We are now looking at Information in much the same way. It is fragmented, it is used to represent value, it is hoarded by some, shared by others. In much that "brown" is the new "black", does that mean "information" is the new"money"?
A related blog post from Shawn over at Anecdote discusses a panelist discussion of Albert Camus' work,The Stranger. Here is an excerpt:
... meaning is not pre-inscribed in the world around us and we are continuously seeking meaning in an inherently meaningless world. I almost toppled off the step machine. Do we live in an inherently meaningless world? On first thought I think the answer is yes. The onus is on us to make sense of our world.
And here is where information, by itself, is not of value unless people place value on it. Just as people valued Wampum and Furs, and could therefore trade it for other goods, people trade information for other itemsof value. But the onus is on us to make sense of the information, to determine the meaning of it, and use thisto help drive business or other accomplishments.
Are you leveraging information as well as investors leverage other people's money? If not, IBM can help.
IBM had over a dozen storage-related announcements this week. This is my third and final part in my series to provide a quick overview of the announcements.
IBM Tivoli® Storage Manager v6.3
IBM Tivoli Storage Manager is market-leading software that provides not just backup, but also HSM and archive capabilities across a wide variety of operating systems. Originally developed in the IBM Almaden Research Center, it then moved about 15 years ago to Tucson to become a commercial product.
The new TSM v6.3 introduces site-to-site hot-standby disaster recovery feature that replicates the TSM meta data and data for fast recovery. The maximum number of objects supported has doubled to four billion. Reporting has been enhanced using technologies borrowed from IBM Cognos. Lastly, a feature on Tivoli Storage Productivity Center has been carried forward to deploy and update agents on the various clients.
IBM Tivoli Storage FlashCopy Manager coordinates application-aware backups through the use of point-in-time copy services such as FlashCopy or Snapshot on various IBM and non-IBM disk systems. The versions can remain on disk, or optionally processed by Tivoli Storage Manager to move them to external storage such as tape for added protection.
There will always be a spot in my heart for this product, as the method to use FlashCopy for application-aware backups on the mainframe was my 19th patent, and subsequently delivered as a series of enhancements to DFSMS over the past decade on the z/OS operating system. It is good to see this innovation has "jumped over" to distributed systems.
The new FlashCopy Manager v3.1 adds support for HP-UX and VMware, expands support for IBM DB2 and Oraqcle databases, and introduces an interface for custom business applications.
IBM Tivoli Storage Manager for Virtual Environments v6.3
TSM for VE is a new addition to the TSM family, focused on being able to coordinate hypervisor-aware data protection. Initially it supports VMware, but IBM has plans to support a variety of other server virtualization hypervisors as well, as over 40 percent of companies run two or more hypervisors in their data center.
The new TSM for VE v6.3 adds a VMware vCenter plug-in, and support for hardware-based disk snapshots.
IBM Tivoli Storage Productivity Center v4.2.2
A long time ago, I was the chief architect IBM Tivoli Storage Productivity Center v1, now we are already up to v4.2.2 release!
IBM has added enhanced reporting based on IBM Cognos technology, including storage tiering analysis reports (STAR). Few companies keep all of their storage tiers in a single disk system. Rather, they have different boxes, and often from different vendors. IBM's Productivity Center can report on both IBM and non-IBM disk systems. New this release is support for the internal disks of the Storwize V7000 midrange disk system.
Productivity Center's "SAN Planner" has been enhanced to consider XIV replication criteria. This SAN Planner helps clients decide where to carve LUNs, and to make sure they pick the right place given all of the criteria such as remote copy replications.
Last year, we introduced Productivity Center for Disk Midrange Edition (MRE) which to offer lower price when you are only managing midrange disk systems DS5000, DS3000, Storwize V7000 and SVC managing these. This was so successful, that we now have TPC Select, which is basically Productivity Center Standard Edition (SE) for these midrange disk systems.
Whew! I have already heard from some of my readers to slow down, that this is too much information to deal with all at once. IBM has tried everything from having just a few announcements nearly every Tuesday, to having huge launches every two to three years, and settled in the middle with announcements about four to five times per year.
This week, IBM made over a dozen announcements related to IBM storage products. Here is part 2 of my overview:
IBM System Storage® DS8000 series microcode
One of the advantages of acquiring XIV as IBM's other high-end disk system, is that it allows the DS8000 team to focus on the IBM i and z/OS operating systems. As a result, IBM DS8000 has over half the mainframe-attach market share.
For both the DS8700 and DS8800 models, IBM Easy Tier now support sub-LUN automated tiering across three storage tiers: Solid-State Drives, high-performance spinning disk drives (15K and 10K RPM), and high-capacity disk drives (7200 RPM).
For System z customers, the latest DS8000 microcode has synergy with z/OS and GDPS, now supporting 4x larger EAV volumes, faster high-performance FICON (zHPF), and Workload Manager (WLM) integration with the I/O Priority Manager. IBM has a world record SAP performance of 59 million account postings per hour. DB2 v10 for z/OS queries were measured at 11x faster using the new zHPF feature.
IBM System Storage® DS8800 systems
On the hardware side, the DS8800 now supports a fourth frame to hold a total over 1,500 disk drives. Yes, we have customers that three frames wasn't enough, and they wanted more.
IBM is now also offering new drive options. Small Form Factor (2.5 inch) drives now include 300GB 15K RPM drives, and a 900GB 10K RPM drives. But wait! There's more! The DS8800 is no longer a SFF-only box, it now allows for mixing in Large form factor (3.5 inch) drives, starting with the 3TB NL-SAS 7200 RPM drive.
IBM XIV® Storage System Gen3
We announced the XIV Gen3 already, but we have two enhancements.
First, we now offer a model based entirely on 3TB NL-SAS drives. If you are thinking, what IBM is going to put 3TB drives into everything? Yup. Once we go through all the pain and suffering of qualifying a drive, we make sure we get our money's worth!
Secondly, we have now an iPad application to manage the XIV. This has nothing to do with Apple CEO Steve Jobs passing away last week, it was merely coincidence.
IBM Real-time Compression Appliances™ STN6500 and STN6800 V3.8
The latest software for RtCA now supports Microsoft SMB v2, and enhanced reporting so that storage admins know exactly the benefits of the compression ratios of different file extensions.
IBM System Storage EXP2500 Express®
The EXP2500 is for direct-attach situations, like the IBM BladeCenter. IBM adds LFF 3.5-inch 3TB NL-SAS drives, SFF 2.5-inch 300GB 15K RPM SAS drives, and 900GB 7200 RPM NL-SAS drives.
My colleague Curtis Neal refers to these as "B.F.D" announcements, which of course stands for Bigger, Faster, Denser!
Well, it's Tuesday, and you know what that means... IBM announcements!
In today's environment, clients expect more from their storage, and from their storage provider. The announcements span the gamut, from helping to use Business Analytics to analyze Big Data for trends, insights and patterns, to managing private, public and hybrid cloud environments, all with systems that are optimized for their particular workloads.
There are over a dozen different announcements, so I will split these up into separate posts. Here is part 1.
IBM Scale Out Network Attach Storage (SONAS) R1.3
I have covered [IBM SONAS] for quite some time now. Based on IBM's General Parallel File System (GPFS), this integrated system combines servers, storage and software into a fully functional scale-out NAS solution that support NFS, CIFS, FTP/SFTP, HTTP/HTTPS, and SCP protocols. IBM continues its technical leadership in the scale-out NAS marketplace with new hardware and software features.
The hardware adds new disk options, with 900GB SAS 15K RPM drives, and 3TB NL-SAS 7200 RPM drives. These come in 4U drawers of 60 drives each, six ranks of ten drives each. So, with the high-performance SAS drives that would be about 43TB usable capacity per drawer, and with the high-capacity NL-SAS drives about 144TB usable. You can have any mix of high-performance drawers and high-capacity drawers, up to 7200 drives, for a maximum usable capacity of 17PB usable (21PB for those who prefer it raw). This makes it the largest commercial scale-out NAS in the industry. This capacity can be made into one big file system, or divided up to 256 smaller file systems.
In addition to snapshots of each file system, you can divide the file system up into smaller tree branches and snapshot these independently as well. The tree branches are called fileset containers. Furthermore, you can now make writeable clones of individual files, which provides a space-efficient way to create copies for testing, training or whatever.
Performance is improved in many areas. The interface nodes now can support a second dual-port 10GbE, and replication performance is improved by 10x.
SONAS supports access-based enumeration, which means that if there are 100 different subdirectories, but you only have authority to access five of them, then that's all you see, those five directories. You don't even know the other 95 directories exist.
I saved the coolest feature for last, it is called Active Cloud Engine™ that offers both local and global file management. Locally, Active Cloud Engine placement rules to decide what type of disk a new file should be placed on. Management rules that will move the files from one disk type to another, or even migrates the data to tape or other externally-managed storage! A high-speed scan engine can rip through 10 million files per node, to identify files that need to be moved, backed up or expired.
Globally, Active Cloud Engine makes the global namespace truly global, allowing the file system to span multiple geographic locations. Built-in intelligence moves individual files to where they are closest to the users that use them most. This includes an intelligent push-over-WAN write cache, on-demand pull-from-WAN cache for reads, and will even pre-fetch subsets of files.
No other scale-out NAS solution from any other storage vendor offers this amazing and awesome capability!
IBM® Storwize® V7000
Last year, we introduced the [IBM Storwize V7000], a midrange disk system with block-level access via FCP and iSCSI protocols. The 2U-high control enclosure held two cannister nodes, a 12-drive or 24-drive bay, and a pair of power-supply/battery UPS modules. The controller could attach up to nine expansion enclosures for more capacity, as well as virtualize other storage systems. This has been one of our most successful products ever, selling over 100PB in the past 12 months to over 2,500 delighted customers.
The 12-drive enclosure now supports both 2TB and 3TB NL-SAS drives. The 24-drive enclosures support 200/300/400GB Solid-State Drives (SSD), 146 and 300GB 15K RPM drives, 300/450/600GB 10K RPM drives, and a new 1TB NL-SAS drive option. For those who want to set up "Flash-and-Stash" in a single 2U drawer, now you can combine SSD and NL-SAS in the 24-drive enclosure! This is the perfect platform for IBM's Easy Tier sub-LUN automated tiering. IBM's Easy Tier is substantially more powerful and easier to use than EMC's FAST-VP or HDS's Dynamic Tiering.
Last week, at Oracle OpenWorld, there were various vendors hawking their DRAM/SSD-only disk systems, including my friends at Texas Memory Systems, Pure Storage, and Violin Memory Systems. When people came to the IBM booth to ask what IBM offers, I explained that both the IBM DS8000 and the Storwize V7000 can be outfitted in this manner. With the Storwize V7000, you can buy as much or little SSD as you like. You do not have to buy these drives in groups of 8 or 16 at a time.
The Storwize V7000 is the sister product of the IBM SAN Volume Controller, so you can replicate between one and the other. I see two use cases for this. First, you might have a SVC at a primary location, and decide to replicate just the subset of mission-critical production data to a remote location, and use the Storwize V7000 as the target device. Secondly, you could have three remote or branch offices (ROBO) that replicate to a centralized data center SAN Volume Controller.
Lastly, like the SVC, the Storwize V7000 now supports clustering so that you can now combine multiple control enclosures together to make a single system.
IBM® Storwize® V7000 Unified
Do you remember how IBM combined the best of SAN Volume Controller, XIV and DS8000 RAID into the Storwize V7000? Well, IBM did it again, combining the best of the Storwize V7000 with the common NAS software base developed for SONAS into the new "Storwize V7000 Unified".
You can upgrade your block-only Storwize V7000 into a file-and-block "Storwize V7000 Unified" storage system. This is a 6U-high system, consisting of a pair of 2U-high file modules connected to a standard 2U-high control enclosure. Like the block-only version, the control enclosure can attach up to nine expansion enclosures, as well as all the same support to virtualize external disk systems. The file modules combine the management node, interface node and storage node functionality that SONAS R1.3 offers.
What exactly does that mean for you? In addition to FCP and iSCSI for block-level LUNs, you can carve out file systems that support NFS, CIFS, FTP/SFTP, HTTP/HTTPS, and SCP protocols. All the same support as SONAS for anti-virus checking, access-based enumeration, integrated TSM backup and HSM functionality to migrate data to tape, NDMP backup support for other backup software, and Active Cloud Engine's local file management are all included!
IBM SAN Volume Controller V6.3
The SAN Volume Controller [SVC] increases its stretched cluster to distances up to 300km. This is 3x further than EMC's VPLEX offering. This allows identical copies of data to be kept identical in both locations, and allows for Live Partition Mobility or VMware vMotion to move workloads seamlessly from one data center to another. Combining two data centers with an SVC stretch cluster is often referred to as "Data Center Federation".
The SVC also introduces a low-bandwidth option for Global Mirror. We actually borrowed this concept from our XIV disk system. Normally, SVC's Global Mirror will consume all the bandwidth it can to keep the destination copy of the data within a few seconds of currency behind the source copy. But do you always need to be that current? Can you afford the bandwidth requirements needed to keep up with that? If you answered "No!" to either of these, then the low-bandwidth option is you. Basically, a FlashCopy is done on the source copy, this copy is then sent over to the destination, and a FlashCopy is made of that. The process is then repeated on a scheduled basis, like every four hours. This greatly reduces the amount of bandwidth required, and for many workloads, having currency in hours, rather than seconds, is good enough.
I am very excited about all these announcements! It is a good time to be working for IBM, and look forward to sharing these exciting enhancements with clients at the Tucson EBC.
Well, it's Tuesday, and more IBM announcements were made today. Many of my colleagues are in Dallas, Texas for the[Storage Networking World conference], and hopefully I will get some feedback from them before the week is over.
Today, IBM made announcements for Storage Area Networking (SAN) gear and disk systems.
8 Gbps Longwave transceivers
IBM now offers 8 Gbps Longwave SFP transceivers on the[IBM System Storage SAN256B and SAN768B] directors, as well as the IBM System Storage SAN24B-4 Express, SAN40B-4, and SAN80B-4 switches (orderable as [machine type models] or [partnumbers] ).These transceivers support single mode fiber up to 10km in distance, comparedto the 50-75 meters supported by the Shortwave SFP transceivers.
Like theShortwave SFP transceivers we already have available, these Longwave transceivers have "N-2" support, which means they can support two generations back: auto-negotiate down to 4 Gbps and 2 Gbps speeds. If you still have 1 Gbps equipment, now is a good time to consider upgrading those, or keep a few 4 Gbps ports available that can auto-negotiate down to 1 Gbps speed.
Mainframe clients that sent data to a remote Business Continuity/Disaster Recovery (BC/DR) location often used "channel extenders", which were special boxes used to minimize performance delays when transmitting FICON across long distances. This was especially helpful for z/OS Global Mirror (what we used to call XRC) as well as electronic vaulting to tape.
Now, this functionality can be part of the directors and routers, eliminating the need for separate equipment.This is available for the SAN768B and SAN256B directors, as well as SAN18B-R and SAN04B-R routers.
Before the merger between Brocade and McDATA, IBM offered SAN18B-R routers from Brocade, and SAN04M-R routers from McDATA. The former had 16 Fibre Channel (FC) ports and two Ethernet ports, and the latter was less expensive with just four ports.Brocade came up with a clever replacement for both. The [IBMSystem Storage SAN04B-R] router comes by default withtwo active FC ports and two Ethernet ports, but also with 14 additional FC ports inactive. A "High Performance Extension" feature activates these additional ports, bringing the SAN04B-R up to the SAN18B-R level, and allows it to support the FICON Accelerator feature above.
So, instead of having specialized channel extenders at both primary and secondary sites, you can havea director with FICON Accelerator at the primary site, sending FICON over Ethernet to a 1U-high router (also running the FICON Accelerator) at the secondary site, whichcan greatly reduce costs. The FICON Accelerator can in some cases double the amount of data transfer throughput,but of course, your mileage may vary.
On the disk side, the [IBMSystem Storage DS3000 series] disk systems have been enhanced, withsupport for 450GB high-speed 15K RPM SAS drives, RAID-6 double-drive protection, more FlashCopy point-in-time copies,and more partitions.On the DS3000, "storage partitions" is what the rest of the industry calls "LUN masking". A storage partition allowsyou to isolate a set of LUNs to only be seen by a single host server, or host cluster that shares the same set ofLUNs. Some clients felt that the default of four partitions was too low, so now up to 32 partitions can be configured.(This is not to be confused with "Logical Partitions" that isolate processor and cache resources available on theIBM System Storage DS8000 and other high-end storage disk systems.)
IBM also extended the Operating System support.The DS3000 series now supports Solaris, either on x86 or SPARC-based servers. The DS3300 iSCSI support now supportsLinux on POWER. The DS3400 allows support of IBM i (the new name for i5/OS V6R1) through the VIOS feature.
The [IBMSystem Storage DCS9900] is a bigger, faster version of the DCS9550. Like the DCS9550, the DCS9900 is designedfor high performance computing (HPC) workloads. The DCS9550 supported up to 960TB in two frames, with 2.8 GB/sec throughput,and an optional disk spin-down capability.The new DCS9900 can support up to 1.2 PB in two frames, with 5.6 GB/sec throughput, but no spin-down capability.
So whether your data center is filled with System z mainframes, or other open systems, IBM has a solution for you.
In this case, it is not chess pieces, but FUD being slung around like mud between vendors. EMC blogger Chuck Hollis' post [Products vs. Features] correctly pointsout that IBM has invented most nearly everything useful in IT, and sadly a few things we wish we hadn't.Gene Amdahl, who left IBM to start his own company, is credited for coining the phrase describing IBM'sinnovative sales techniques. Wikipedia has a nice write up on the history of[Fear, Uncertainty and Doubt(FUD)].
Nowadays, when you hear "FUD" most storage administrators immediately think of EMC, who have taken this method to anew level of art-form. Take for example two EMC entries from fellow blogger BarryB, on his Storage Anarchist blog:[Not Dead Yet, andPushing Daisies].The first is a reference to a funny scene from a Monty Python movie, and the second one is referring to a terriblenew television program called "Pushing Daisies". (In this show, the main character can bring a dead personback to life for sixty seconds, just long enough to ask a few questions on behalf of his detective friend. He must touch the person again within 60 seconds, or someone else randomly dies instead. I amnot a fan of this concept, and found it a bit morbid and creepy. But I digress.)
It is true I was on vacation the past two weeks, but this was group travel I booked over six months ago before we had the exact dates lined up for our various announcements, and not a last-minute celebration of my recent new job assignment. I got all my assignments for this announcement turned in before leaving for my trip. I never thought of checking with fellow IBM blogger BarryW to make sure that we don't have overlapping vacation schedules, leaving the "blogosphere" unmanned, so to speak, but it is not a bad idea. Fortunately, our IBM PR team was able to make their rebuttal through other means. You can read the recap on Techworld [Marketing Wars by Proxy].
Several astute readers on my blog, however, requested that I add my two cents. Let's take a look at some of BarryB's comments:
...most DS8300's are to this day most frequently bundled as "free" storage with IBM mainframe and server sales.
We just shipped our 15,000th box, so for this absurd statement to be true, more than half would have to be given away as part of a server-and-storage deal?Actually, about a third of our DS8000 sales are sold with servers in the same bundle, and while we do provide discounts from the official list price, that is not the same as "free". The other two thirds are sold into accounts to be used with the existing servers already deployed. So BarryB, your math doesn't work out. (Perhaps you've been taking Hitachi math lessons???)
It is interesting however, that when we do a 4-year TCO comparison, between a normally-discounted DS8000 versus free EMC DMX4 hardware, IBM still has the lower cost, given that most of the price-gouging from EMC happens after the initial sale, through software features, annual Powerpath renewals and MES upgrades. If you are an EMC customer, and you are planning to add more capacity to your DMX, ask EMC to charge you no more than what you originally paid on a dollar-per-GB basis for the initial capacity. That's only fair, right?
...No thin provisioning, or even a commitment to thin provisioning. Just crickets. (Celerra support since Jan 2006...
EMC DMX does not have thin provisioning available today either, so BarryB brings up Celerra, their NAS box? IBM System Storage N series NAS box also has thin provisioning, so if you want thin provisioning you can buy a NAS box from EMC or IBM. Thin provisioning makes sense using NAS protocols, as there are actual commands to "delete a file" that can then free up the related blocks in a thin-provisioned environment. The only way to do this with block-oriented protocols is to get the OS to notify the storage device that blocks can be freed up. As it turns out, IBM's z/OS has such support, which we developed specifically for our thin-provisioning support in our IBM RAMAC Virtual Array disk systems back in the 1990s.For block-oriented devices on most other operating systems, thin provisioning may not be all that it is cracked up to be.
No SATA drives (only DMX-4 supports native SATA-II drives, since Aug’07)
A few people are confused on this. IBM DS8000 has supported FATA for quite some time now, same slower speeds and higher capacities as SATA, but are technically NOT the same as SATA. FATA are designed to provide better protection against vibrational shock, to improve reliability of the drives. IBM felt that if the data was important enough to put on a high-end system, it should get better-than-SATA treatment. If you really want SATA, try our IBM System Storage N series, DS4000 or DS3000 models.
No RAID 6 (DMX-3 has supported multi-dimensional RAID since Q1’07, DMX-4 since Aug'07, ...
IBM N series supports RAID6, but we called it RAID-DP and that confused some people. Same thing, DP stands for Dual Parity, protecting against a double-disk failure. We also just announced RAID6 on our DS4000 series, by the way.
No 4Gb back-end (USP-V since May '07, DMX-4 since Aug’07)
I found this one odd, since BarryB himself in an earlier post explained why 4Gbps back-end made no difference to DMX4 performance in this post [DMX-4 and Oh So Much More], which I will put into a different color so you can tell it is from a different post:
You may have noticed that there weren't any specific performance claims attributed to the new 4Gb FC back-end. This wasn't an oversight, it is in fact intentional. The reality is that when it comes to massive-cache storage architectures, there really isn't that much of a difference between 2Gb/s transfer speeds and 4Gb/s. Transmit times are really only a tiny portion of I/O overhead, and just don't make that much difference when a massively-cached system is pre-fetching reads, buffering/delaying writes and reordering I/O requests to minimize seek times. Not that 4Gb/s won't help some applications, but most people just won't see any noticeable difference.
In this case, BarryB is right. The IBM DS8000's 2Gbps back-end is not a performance bottleneck. The DS8000 with a 2Gbps back-end is faster than DMX4 with a 4Gbps back-end for business application workloads. EMC doesn't publish SPC benchmarks to deny this, so you will just have to take our word on this.
Still only 1024 maximum disk drives (DMX-3 & 4 support up to 2400 drives, USP-V supports 1152)
I would be curious to see how many customers have more than 1024 drives on any high-end disk array.As we learned back in [Day 2 Storage Symposium], the average DS8100 has 17.4 TB, and DS8300 has 41.5 TB capacity. Using 500GB drives,that's only 83 spindles. Even with 73GB drives, that's 568 spindles. Plenty of room for growth, so I am notconvinced that higher theoretical upper architectural limits are worth discussing here.
Still only two HARD LPARs (partitions) ..., and even IBM’s mid-tier products support more than 2 storage partitions (in this same announcement)
IBM's two LPARs are TWICE what EMC DMX offers. I don't even know why anyone from EMC would bring this up? While EMC is enjoying their success with VMware, the lack the experience to carry this over to their storage lines. Until EMC offers MORE THAN TWO of any kind of partitions on their high-end offerings, there just is no credibility here. As for our "storage partitions" on our DS4000 line, that is an unfortunate mis-understanding of the press release. On the DS4000, the term "storage partition" is really "LUN masking", dividing up only which disks can be accessed by which hosts, and not dividing up any processor or cache capacity. So this is not the same as any LPAR concept on any other system. For example, a DS4000 with 64 partitions can be attached to 64 hosts, or 64 host-clusters like a Windows MSCS environment or AIX HACMP.
No native Ethernet replication or iSCSI support (Symmetrix has had since 2002)
Again, I found this one odd. On another EMC post, [Vigorous Debates],Chad Sakac mentions that only 2% of Symmetrix are sold with IP ports, not sure if this is for Ethernet replication, iSCSI attachment, or both (Again, I will use a different color):
On the Symm business (a huge part of EMC’s business – the IP ports are included on 2% of deals. That’s a fact.
Just because engineer can put a feature or function on a box, doesn't mean there is business sense to do so. I would hate for IBM to invest millions of dollars on native iSCSI support, only to have 2% of our DS8000 boxes sold with that feature. Customers who have DS8000 on FC SANs already deployed can easily add iSCSI support either through their SAN switches, or by fronting the DS8000 with an N series gateway. Most customers looking for native iSCSI are the smaller no-SAN-deployed SMB customers, and for them, we have both the DS3300 and the various N series models to choose from.
Well that's my two cents. The DS8000 series remains a strategic part of the IBM System Storage offering matrix, with continued investment in the development, as well as on-going research that we can leverage throughout the IBM company. I would like to read your thoughts on this, post me a comment below.
On StorageZilla, fellow blogger Mark Twomey introduces the latest entrant from EMC to the blogosphere,in his post [Polly Pearson's blog].
Although we share the same name, with the same exact spelling, I would like be the first to point out we are not related, at least as far as I know. Basing solely from her post[Welcome to my Blog - Part 1], sheis a year younger than I am, a lot better looking, majored in communications, and is not afraid to quit acrappy job for a much better job elsewhere. I on the other hand, majored in engineering, but agree wholeheartedly not to stick in a crappy situation. There is such a skills shortage out there in the IT industry,with a cap on U.S. [H-1B visas] at a paltry [65,000 this year]. If you don't like your IT job, you should be able toquit and find another one in the IT industry you are more passionate about.
On a similar theme, over at DrunkenData, Jon Toigo's latest post asks if you are[Feeling Insecure About Your Job?]ScoreLogix’s Job Security Index has fallen in the United States, with a sharp drop specifically for IT jobs. Jon points out that while it might be easy to point out that a number went up or down, it is far more difficultto explain why it did so. He gives a good piece of career advice:
Want to keep your job? Play by the rules of the front office: demonstrate the value of what you do for the company from the standpoint of cost-savings, risk reduction and process improvement. Make yourself indispensable. If they don’t appreciate you then, you need to move on. You will always be hiding in your cubical and sweating a pink slip ...
So shine bright. Be remarkable. It is not always easy to communicate your value in a technical position to cluelessnon-technical managers. Certainly, writing a blog helps. Within IBM, there are over 3500 bloggers. Most postwithin the safe confines behind the firewall, but manage to generate ideas, present valid arguments, and get theconversation rolling with the right set of people that might be difficult otherwise in a company like IBM of over350,000 employees scattered around the world. A few of us daringly blog in full public, and carry the conversationto our clients, prospects, analysts, journalists, Business Partners, and others within the IT industry.
So, Polly Pearson from EMC, although we have never met in person, I too welcome you to the blogosphere!