This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
Did IBM XIV force EMC's hand to announce VMAXe? Let's take a stroll down memory lane.
In 2008, IBM XIV showed the world that it could ship a Tier-1, high-end, enterprise-class system using commodity parts. Technically, prior to its acquisition by IBM, the XIV team had boxes out in production since 2005. EMC incorrectly argued this announcement meant the death of the IBM DS8000. Just because EMC was unable to figure out how to have more than one high-end disk product, doesn't mean IBM or other storage vendors were equally challenged. Both IBM XIV and DS8000 are Tier-1, high-end, enterprise-class storage systems, as are the IBM N series N7900 and the IBM Scale-Out Network Attached Storage (SONAS).
In April 2009, EMC followed IBM's lead with their own V-Max system, based on Symmetrix Engenuity code, but on commodity x86 processors. Nobody at EMC suggested that the V-Max meant the death of their other Symmetrix box, the DMX-4, which means that EMC proved to themselves that a storage vendor could offer multiple high-end disk systems. Hitachi Data Systems (HDS) would later offer the VSP, which also includes some commodity hardware as well.
In July 2009, analysts at International Technology Group published their TCO findings that IBM XIV was 63 percent less expensive than EMC V-Max, in a whitepaper titled [COST/BENEFIT CASE
FOR IBM XIV STORAGE SYSTEM Comparing Costs for IBM XIV and EMC V-Max Systems]. Not surprisingly, EMC cried foul, feeling that EMC V-Max had not yet been successful in the field, it was too soon to compare newly minted EMC gear with a mature product like XIV that had been in production accounts for several years. Big companies like to wait for "Generation 1" of any new product to mature a bit before they purchase.
To compete against IBM XIV's very low TCO, EMC was forced to either deeply discount their Symmetrix, or counter-offer with lower-cost CLARiiON, their midrange disk offering. An ex-EMCer that now works for IBM on the XIV sales team put it in EMC terms -- "the IBM XIV provides a Symmetrix-like product at CLARiiON-like prices."
(Note: Somewhere in 2010, EMC dropped the hyphen, changing the name from V-Max to VMAX. I didn't see this formally announced anywhere, but it seems that the new spelling is the officially correct usage. A common marketing rule is that you should only rename failed products, so perhaps dropping the hyphen was EMC's way of preventing people from searching older reviews of the V-Max product.)
This month, IBM introduced the IBM XIV Gen3 model 114. The analysts at ITG updated their analysis, as there are now more customers that have either or both products, to provide a more thorough comparison. Their latest whitepaper, titled [Cost/Benefit Case for IBM XIV Systems: Comparing Cost
Structures for IBM XIV and EMC VMAX Systems], shows that IBM maintains its substantial cost savings advantage, representing 69 percent less Total Cost of Ownership (TCO) than EMC, on average, over the course of three years.
In response, EMC announced its new VMAXe, following the naming convention EMC established for VNX and VNXe. Customers cannot upgrade VNXe to VNX, nor VMAXe to VMAX, so at least EMC was consistent in that regard. Like the IBM XIV and XIV Gen3, the new EMC VMAXe eliminated "unnecessary distractions" like CKD volumes and FICON attachment needed for the IBM z/OS operating system on IBM System z mainframes. Fellow blogger Barry Burke from EMC explains everything about the VMAXe in his blog post [a big thing in a small package].
So, you have to wonder, did IBM XIV force EMC's hand into offering this new VMAXe storage unit? Surely, EMC sales reps will continue to lead with the more profitable DMX-4 or VMAX, and then only offer the VMAXe when the prospective customer mentions that the IBM XIV Gen3 is 69 percent less expensive. I haven't seen any list or street prices for the VMAXe yet, but I suspect it is less expensive than VMAX, on a dollar-per-GB basis, so that EMC will not have to discount it as much to compete against IBM.
The new [IBM System Storage Tape Controller 3592 Model C07] is an upgrade to the previous C06 controller. Like the C06, the new 3592-C07 can have up to four FICON (4Gbps) ports, four FC ports, and connect up to 16 drives. The difference is that the C07 supports 8Gbps speed FC ports, and can support the [new TS1140 tape drives that were announced on May 9]. A cool feature of the C07 is that it has a built-in library manager function for the mainframe. On the previous models, you had to have a separate library manager server.
Crossroads ReadVerify Appliance (3222-RV1)
IBM has entered an agreement to resell [Crossroads ReadVerify Appliance], or "RV1" for short. The RV1 is a 1U-high server with software that gathers information on the utilization, performance and health for a physical tape environment, such as an IBM TS3500 Tape Library. The RV1 also offers a feature called "ArchiveVerify" which validates long-term retention archive tapes, providing an audit trail on the readability of tape media. This can be useful for tape libraries attached behind IBM Information Archive compliance storage solution, or the IBM Scale-Out Network Attached Storage (SONAS).
As an added bonus, Crossroads has great videos! Here's one, titled [Tape Sticks]
Linear Tape File System (LTFS) Library Edition Version 2.1
While the hardware is all refreshed, the overall "scale-out" architecture is unchanged. Kudos to the XIV development team for designing a system that is based entirely on commodity hardware, allowing new hardware generations to be introduced with minimal changes to the vast number of field-proven software features like thin provisioning, space-efficient read-only and writeable snapshots, synchronous and asynchronous mirroring, and Quality of Service (QoS) performance classes.
The new XIV Gen3 features an Infiniband interconnect, faster 8Gbps FC ports, more iSCSI ports, faster motherboard and processors, SAS-NL 2TB drives, 24GB cache memory per XIV module, all in a single frame IBM rack that supports the IBM Rear Door Heat Exchanger. The results are a 2x to 4x boost in performance for various workloads. Here are some example performance comparisons:
Disclaimer: Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. Your mileage may vary.
In a Statement of Direction, IBM also has designed the Gen3 modules to be "SSD-ready" which means that you can insert up to 500GB of Solid-State drive capacity per XIV module, up to 7.5TB in a fully-configured 15 module frame. This SSD would act as an extension of DRAM cache, similar to how Performance Accelerator Modules (PAM) on IBM N series.
IBM will continue to sell XIV Gen2 systems for the next 12-18 months, as some clients like the smaller 1TB disk drives. The new Gen3 only comes with 2TB drives. There are some clients that love the XIV so much, that they also use it for less stringent Tier 2 workloads. If you don't need the blazing speed of the new Gen3, perhaps the lower cost XIV Gen2 might be a great fit!
As if I haven't said this enough times already, the IBM XIV is a Tier-1, high-end, enterprise-class disk storage system, optimized for use with mission critical workloads on Linux, UNIX and Windows operating systems, and is the ideal cost-effective replacement for EMC Symmetrix VMAX, HDS USP-V and VSP, and HP P9000 series disk systems, . Like the XIV Gen2, the XIV Gen3 can be used with IBM System i using VIOS, and with IBM System z mainframes running Linux, z/VM or z/VSE. If you run z/OS or z/TPF with Count-Key-Data (CKD) volumes and FICON attachment, go with the IBM System Storage DS8000 instead, IBM's other high-end disk system.
Friday - We landed in Paris, France. I have been to Paris many times, but this was a first for Mo. A croissant cost only 2 Euro, but the young woman behind the counter gave me a look of disgust when I asked for a knife and butter to put on the croissant. If you ever get the chance to have a real French croissant, you will realize you don't need any more butter. If you do attempt to put anything on the croissant, it will disintegrate into a million tiny pieces!
2. Visit Ronda
Saturday - We rented a car and drove to the mountain village of [Ronda, Spain], which is in the heart of the region of Spain called Andalucia. Why Ronda? This was where Mo's uncle was stationed during the war. The town is built on two mountains, connected by a set of bridges. The tallest is "Puente Nuevo", built in the 1700s, which is nearly 400 feet tall. Ronda is also home of Spain's oldest Bull Fighting ring. Bars and restaurants built along the cliff offer some spectacular views. Mo and I shared a "Paella Mixta" for lunch, consisting of yellow rice with bits of chicken and seafood.
3. Soak in European Mineral Waters
Sunday - Most things in Europe are closed on Sunday, so we decided to have a "Spa Day" at the [Gran Hotel Benahavis], in Benahavis, Spain. This lovely hotel is built over a natural mineral waters hot spring, and an underground spa allowed us to relax in the warmth. The spa also had a dry sauna, steam sauna, and ice cold water bath to complete the experience.
4. Climb to the Top of the Rock of Gibraltar
Monday - Technically, Gibraltar is a separate country, but they use British money (Pound Sterling). To get to the top of the rock, we drove across their airport runway, saw the mosque at Point Europa, parked in large parking lot and took the cable car to the top. From there, we climbed a few more steps to see the grand views of Spain and North Africa, while keeping our distance from the infamous monkeys. These [Barbary Macaque] are cute, but can bite or scratch you if you get too close. Afterwards, we had lunch in a pub called the Angry Friar.
5. See Snake Charmers in Morocco
Tuesday - We took a guided tour over to the Kingdom of Morocco. This included a ferry boat ride from Tarifa, Spain to Tangier, Morocco. A bus then took us to the "Kasbah" (the fort), where we got to see snake charmers perform their act. We had an interesting lunch, followed by obligatory "shopping opportunities" for rugs and spices. Back on the bus, we went to a place to go ride camels, see the King's palace, and visit the the Grotto of Hercules. The last stop was to sit back and relax for a nice cup of hot Menthol Tea at Cap Spartel, the northernmost point of Morocco.
6. Hang Out at a Mediterranean Beach
Wednesday - Our last full day in Spain, we decided to have lunch on the beach. This region is referred to as Costa Del Sol. We opted for "Playa de la Rada" in Estepona, Spain. The beach was a bit rocky, the sand was hot and uncomfortable to walk on, and the heat and humidity was just slightly less than the steam sauna at the Gran Hotel Benahavis. We stayed in the shade of our beach-side restaurant and had a lunch of grilled sardines and the local Cruzcampo beer.
7. Visit the World of Coca-Cola
Thursday - we drove to Malaga, Spain, and flew back to the United States. Malaga is famous for celebrities like Ernest Hemingway and Pablo Picaso. We could not get all the way back to Tucson, so we stayed overnight in Atlanta.
Friday - This gave us an opportunity to visit the [World of Coca-Cola], where Mo's cousin had done some recent marketing work in celebration of their 125 year anniversary. This is a museum with a live bottling operation on display, a 4D movie, viewing areas to see commercials from around the world, and free tasting, sampling some of the 105 different soft drink flavors manufactured. I recommend the Tawney Ginger from Tanzania, and the Simba Guarana from Brazil. I did not care for the Apple-and-Carrot soda from Japan.
8. See a Manta Ray Up Close
Our discount combo tickets included a visit to the [Georgia Aquarium] next door. Mo can't scuba-dive, but she got stung by a ray when she was a kid, and wanted to show me a big Manta Ray up close. The aquarium was quite good, divided up into separate exhibits, including interactive touch-the-fish areas for the kids, Beluga whales, Jellyfish, Seahorses, and a moving sidewalk that takes you underneath the sea life.
I would like to thank Delta Air Lines for letting Mo and I take this trip using frequent flyer miles, Hertz Rental Cars for offering a sweet deal on a tiny Hyundai i20 car, the Gran Hotel Benahavis for their hospitality, and the incredibly warm and helpful people of Atlanta. I am glad that my language skills in French, Spanish and Arabic came in quite handy!
(FTC Disclosure: I do not work or have any financial investments in ENC Security Systems. ENC Security Systems did not paid me to mention them on this blog. Their mention in this blog is not an endorsement of either their company or any of their products. Information about EncryptStick was based solely on publicly available information and my own personal experiences. My friends at ENC Security Systems provided me a full-version pre-loaded stick for this review.)
The EncryptStick software comes in two flavors, a free/trial version, and the full/paid version. The free trial version has [limits on capacity and time] but provides enough glimpse of the product to decide before you buy the full version. You can download the software yourself and put in on your own USB device, or purchase the pre-loaded stick that comes with the full-version license.
Whichever you choose, the EncryptStick offers three nice protection features:
Encryption for data organized in "storage vaults", which can be either on the stick itself, or on any other machine the stick is connected to. That is a nice feature, because you are not limited to the capacity of the USB stick.
Encrypted password list for all your websites and programs.
A secure browser, that prevents any key-logging or malware that might be on the host Windows machine.
I have tried out all three functions and everything works as advertised. However, there is always room for improvement, so here are my suggestions.
The first problem is that the pre-loaded stick looks like it is worth a million dollars. It is in a shiny bronze color with "EncryptStick" emblazoned on it. This is NOT subtle advertising! This 8GB capacity stick looks like it would be worth stealing solely on being a nice piece of jewelry, and then the added bonus that there might be "valuable secrets" just makes that possibility even more likely.
If you want to keep your information secure, it would help to have "plausible deniability" that there is nothing of value on a stick. Either have some corporate logo on it, of have the stick look like a cute animal, like these pig or chicken USB sticks.
It reminds me how the first Apple iPod's were in bright [Mug-me White]. I use black headphones with my black iPod to avoid this problem.
Of course, you can always install the downloadable version of EncryptStick software onto a less conspicuous stick if you are concerned about theft. The full/paid version of EncryptStick offers an option for "lost key recovery" which would allow you to backup the contents of the stick and be able to retrieve them on a newly purchased stick in the event your first one is lost or stolen.
Imagine how "unlucky" I felt when I notice that I had lost my "rabbits feet" on this cute animal-themed USB stick.
I sense trouble for losing the cap on my EncryptStick as well. This might seem trivial, but is a pet-peeve of mine that USB sticks should plan for this. Not only is there nothing to keep the cap on (it slides on and off quite smoothly), but there is no loop to attach the cap to anything if you wanted to.
Since then, I got smart and try to look for ways to keep the cap connected. Some designs, like this IBM-logoed stick shown above, just rotate around an axle, giving you access when you need it, and protection when it is folded closed.
Alternatively, get a little chain that allows you to attach the cap to the main stick. In the case of the pig and chicken, the memory section had a hole pre-drilled and a chain to put through it. I drilled an extra hole in the cap section of each USB stick, and connected the chain through both pieces.
(Warning: Kids, be sure to ask for assistance from your parents before using any power tools on small plastic objects.)
The EncryptStick can run on either Microsoft Windows or Mac OS. The instructions indicate that you can install both versions of download software onto a single stick, so why not do that for the pre-loaded full version? The stick I have had only the Windows version pre-loaded. I don't know if the Windows and Mac OS versions can unlock the same "storage vaults" on the stick.
Certainly, I have been to many companies where either everyone runs Windows or everyone runs Mac OS. If the primary target audience is to use this stick at work in one of those places, then no changes are required. However, at IBM, we have employees using Windows, Mac OS and Linux. In my case, I have all three! Ideally, I would like a version of EncryptStick that I could take on trips with me that would allow me to use it regardless of the Operating System I encountered.
Since there isn't a Linux-version of EncryptStick software, I decided to modify my stick to support booting Linux. I am finding more and more Linux kiosks when I travel, especially at airports and high-traffic locations, so having a stick that works both in Windows or Linux would be useful. Here are some suggestions if you want to try this at home:
Use fdisk to change the FAT32 partition type from "b" to "c". Apparently, Grub2 requires type "c", but the pre-loaded EncryptStick was set to "b". The Windows version of EncryptStick> seems to work fine in either mode, so this is a harmless change.
Install Grub2 with "grub-install" from a working Linux system.
Once Grub2 is installed, you can boot ISO images of various Linux Rescue CDs, like [PartedMagic] which includes the open-source [TrueCrypt] encryption software that you could use for Linux purposes.
This USB stick could also be used to help repair a damaged or compromised Windows system. Consider installing [Ophcrack] or [Avira].
Certainly, 8GB is big enough to run a full Linux distribution. The latest 32-bit version of [Ubuntu] could run on any 32-bit or 64-bit Intel or AMD x86 machine, and have enough room to store an [encrypted home directory].
Since the stick is formatted FAT32, you should be able to run your original Windows or Mac OS version of EncryptStick with these changes.
Depending on where you are, you may not have the luxury to reboot a system from the USB memory stick. Certainly, this may require changes to the boot sequence in the BIOS and/or hitting the right keys at the right time during the boot sequence. I have been to some "Internet Cafes" that frown on this, or have blocked this altogether, forcing you to boot only from the hard drive.
Well, those are my suggestions. Whether you go on a trip with or without your laptop, it can't hurt to take this EncryptStick along. If you get a virus on your laptop, or have your laptop stolen, then it could be handy to have around. If you don't bring your laptop, you can use this at Internet cafes, hotel business centers, libraries, or other places where public computers are available.
In less than a month, I will be presenting at the annual IBM Storage Technical University, July 18-22, at the Hilton in Orlando, Florida. This is one of my favorite conferences! You can sign up for this at their [Online Registration Page].
I will be covering a variety of topics:
IBM Storage Strategy in the Era of Smarter Computing - After IBM has led the IT industry through the "Centralized Computing" era, and then later the "Distributed Computing" era, we are now entering the third era, that of Smarter Computing. Come learn IBM's strategy for Storage to address today's big challenges, including Big Data, Integrated Workload-optimized systems, and Cloud service delivery models.
IBM Information Archive for Email, Files and eDiscovery - This session will cover the latest announcement for our non-erasable, non-rewriteable compliance storage, the Information Archive (IA), how this can be used to protect your emails and files, and provide indexed search to assist with eDiscovery.
IBM Tivoli Storage Productivity Center Overview and Update - I was one of the original lead architects for Productivity Center. Come learn what this software is all about, and how the latest features and functions can help you manager your IT environment.
IBM SONAS and the Smart Business Storage Cloud - Confused about Cloud Computing and Cloud Storage? I will explain everything you need to know, including how the integrated SONAS appliance operates, IBM's customized solutions for private cloud deployments, and IBM's public cloud offerings.
BOF on Social Media - BOF stands for "Birds of a Feather", and his normally an after-hours discussion on a single theme. This BOF will be a four-expert Q&A panel, including myself, John Sing, Rich Swain and Ian Wright. We will discuss how we got started in Social Media, and how it has boosted our careers and our ability to get work done.