This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Every September, IBM Tucson spends a Wednesday or Saturday to help out local non-profit charities. The event is orgnaized the the local United Way. My first one was packing boxes of food for the [Community Food Bank of Southern Arizona] on September 12, 2001, the day after the [tragic events in New York and Washington DC]. The mindless activity of putting a bottle, bag or can into one box after another helped us cope with the shock and awe that week.
So, it seemed fitting on the 10th anniversary of that event to go back to the Community Food Bank and help pack boxes of food. The facility received nearly $200,000 in donations in response to the [shooting of US Congresswoman Gabrielle Giffords]. Her husband, astronaut Mark Kelly, suggested that dontaions go in part to the Tucson Community Food Bank, and with the money they were able to expand operations, dedicating a portion as the [Gabrielle Giffords Family Assistance Center] to bring together food handouts with the [Supplemental Nutrition Assistance Program for food stamps, and the Women with Infant Children (WIC) program. One-stop assistance!
This year, nearly 500 Tucson IBMers to complete 22 projects at 17 nonprofit agencies. We were not alone, we were joined by volunteers from Bank of America, Texas Instruments, Tucson Medical Center, Geico Insurance, University of Arizona, Cox Cable TV, Desert Diamond Casinos, The Westin La Paloma Resort and Spa, the Arizona Lottery, Community Partnership of Southern Arizona (CPSA), Pizza Hut, Arizona Daily Star, 94.9 MixFM Radio, BizTucson, and News 4 Tucson (our local NBC affiliate).
In a bit of competition, our team, Team B, of 14 IBMers, competed against another team, Team A, of 20 people. Despite having fewer people, we were able to pack 746 boxes, representing 20,000 pounds of food, beating out Team A which only packed 18,000 pounds. (I have chosen not to identify anyone on Team A, no need to rub their noses in it. This was all for a good cause.)
Each box contained cereal, canned evaporated milk, canned vegetables and fruits, fruit juice, rice, and dry beans. My job on the assembly line was to put two half-gallon jugs of grape juice in the box and move it down the line.
What lessons can a team of people learn from an activity like this?
When you put a bunch of efficiency experts from IBM on a task, they will self-organize and self-manage for optimum performance, just as we don on our regular day jobs.
No matter what you plan in advance, individual personalities and strengths surface, encouraging minor adjustments to process and procedures to be more efficient.
In an assembly line process, where each person has to wait for the person before them to finish their assigned task, it becomes obvious who is not pulling their fair share of the work. In this manner, everyone holds everyone else accountable for their output.
This was a great day for a good cause. The Community Food Bank qualifies for the Arizona [Working Poor Tax Credit] program. For every dollar the Community Food Bank receives, they can give 10 dollars of food to someone in need.
Special thanks to Greg Kishi for being our team leader for this event, and to Carol Tribble for taking these photographs.
Last week, fellow IBMer Ron Riffe started his three-part series on the Storage Hypervisor. I discussed Part I already in my previous post [Storage Hypervisor Integration with VMware]. We wrapped up the week with a Live Chat with over 30 IT managers, industry analysts, independent bloggers, and IBM storage experts.
"The idea of shopping from a catalog isn’t new and the cost efficiency it offers to the supplier isn’t new either. Public storage cloud service providers seized on the catalog idea quickly as both a means of providing a clear description of available services to their clients, and of controlling costs. Here’s the idea… I can go to a public cloud storage provider like Amazon S3, Nirvanix, Google Storage for Developers, or any of a host of other providers, give them my credit card, and get some storage capacity. Now, the “kind” of storage capacity I get depends on the service level I choose from their catalog.
Most of today’s private IT environments represent the complete other end of the pendulum swing – total customization. Every application owner, every business unit, every department wants to have complete flexibility to customize their storage services in any way they want. This expectation is one of the reasons so many private IT environments have such a heavy mix of tier-1 storage. Since there is no structure around the kind of requests that are coming in, the only way to be prepared is to have a disk array that could service anything that shows up. Not very efficient… There has to be a middle ground.
Private storage clouds are a little different. Administrators we talk to aren’t generally ready to let all their application owners and departments have the freedom to provision new storage on their own without any control. In most cases, new capacity requests still need to stop off at the IT administration group. But once the request gets there, life for the IT administrator is sweet!
Here comes the request from an application owner for 500GB of new “Database” capacity (one of the options available in the storage service catalog) to be attached to some server. After appropriate approvals, the administrator can simply enter the three important pieces of information (type of storage = “Database”, quantity = 500GB, name of the system authorized to access the storage) and click the “Go” button (in TPC SE it’s actually a “Run now” button) to automatically provision and attach the storage. No more complicated checklists or time consuming manual procedures.
A storage hypervisor increases the utilization of storage resources, and optimizes what is most scarce in your environment. For Linux, UNIX and Windows servers, you typically see utilization rates of 20 to 35 percent, and this can be raised to 55 to 80 percent with a storage hypervisor. But what is most scarce in your environment? Time! In a competitive world, it is not big animals eating smaller ones as much as fast ones eating the slow.
Want faster time-to-market? A storage hypervisor can help reduce the time it takes to provision storage, from weeks down to minutes. If your business needs to react quickly to changes in the marketplace, you certainly don't want your IT infrastructure to slow you down like a boat anchor.
Want more time with your friends and family? A storage hypervisor can migrate the data non-disruptively, during the week, during the day, during normal operating hours, instead of scheduling down-time on an evenings and weekends. As companies adopt a 24-by-7 approach to operations, there are fewer and fewer opportunities in the year for scheduled outages. Some companies get stuck paying maintenance after their warranty expires, because they were not able to move the data off in time.
Want to take advantage of the new Solid-State Drives? Most admins don't have time to figure out what applications, workloads or indexes would best benefit from this new technology? Let your storage hypervisor automated tiering do this for you! In fact, a storage hypervisor can gather enough performance and usage statistics to determine the characteristics of your workload in advance, so that you can predict whether solid-state drives are right for you, and how much benefit you would get from them.
Want more time spent on strategic projects? A storage hypervisor allows any server to connect to any storage. This eliminates the time wasted to determine when and how, and let's you focus on the what and why of your more strategic transformational projects.
If this sounds all too familiar, it is similar to the benefits that one gets from a server hypervisor -- better utilization of CPU resources, optimizing the management and administration time, with the agility and flexibility to deploy new technologies in and decommission older ones out.
"Server virtualization is a fairly easy concept to understand: Add a layer of software that allows processing capability to work across multiple operating environments. It drives both efficiency and performance because it puts to good use resources that would otherwise sit idle.
Storage virtualization is a different animal. It doesn't free up capacity that you didn't know you had. Rather, it allows existing storage resources to be combined and reconfigured to more closely match shifting data requirements. It's a subtle distinction, but one that makes a lot of difference between what many enterprises expect to gain from the technology and what it actually delivers."
Jon Toigo on his DrunkenData blog brings back the sanity with his post [Once More Into the Fray]. Here is an excerpt:
"What enables me to turn off certain value-add functionality is that it is smarter and more efficient to do these functions at a storage hypervisor layer, where services can be deployed and made available to all disk, not to just one stand bearing a vendor’s three letter acronym on its bezel. Doesn’t that make sense?
I think of an abstraction layer. We abstract away software components from commodity hardware components so that we can be more flexible in the delivery of services provided by software rather than isolating their functionality on specific hardware boxes. The latter creates islands of functionality, increasing the number of widgets that must be managed and requiring the constant inflation of the labor force required to manage an ever expanding kit. This is true for servers, for networks and for storage.
Can we please get past the BS discussion of what qualifies as a hypervisor in some guy’s opinion and instead focus on how we are going to deal with the reality of cutting budgets by 20% while increasing service levels by 10%. That, my friends, is the real challenge of our times."
Did you miss out on last Friday's Live Chat? We are doing it again this Friday, covering parts I and II of Ron's posts, so please join the conversation! The virtual dialogue on this topic will continue in another [Live Chat] on September 30, 2011 from 12 noon to 1pm Eastern Time.
Over on the Tivoli Storage Blog, there is an exchange over the concept of a "Storage Hypervisor". This started with fellow IBMer Ron Riffe's blog post [Enabling Private IT for Storage Cloud -- Part I], with a promise to provide parts 2 and 3 in the next few weeks. Here's an excerpt:
"Storage resources are virtualized. Do you remember back when applications ran on machines that really were physical servers (all that “physical” stuff that kept everything in one place and slowed all your processes down)? Most folks are rapidly putting those days behind them.
In August, Gartner published a paper [Use Heterogeneous Storage Virtualization as a Bridge to the Cloud] that observed “Heterogeneous storage virtualization devices can consolidate a diverse storage infrastructure around a common access, management and provisioning point, and offer a bridge from traditional storage infrastructures to a private cloud storage environment” (there’s that “cloud” language). So, if I’m going to use a storage hypervisor as a first step toward cloud enabling my private storage environment, what differences should I expect? (good question, we get that one all the time!)
The basic idea behind hypervisors (server or storage) is that they allow you to gather up physical resources into a pool, and then consume virtual slices of that pool until it’s all gone (this is how you get the really high utilization). The kicker comes from being able to non-disruptively move those slices around. In the case of a storage hypervisor, you can move a slice (or virtual volume) from tier to tier, from vendor to vendor, and now, from site to site all while the applications are online and accessing the data. This opens up all kinds of use cases that have been described as “cloud”. One of the coolest is inter-site application migration.
A good storage hypervisor helps you be smart.
Application owners come to you for storage capacity because you’re responsible for the storage at your company. In the old days, if they requested 500GB of capacity, you allocated 500GB off of some tier-1 physical array – and there it sat. But then you discovered storage hypervisors! Now you tell that application owner he has 500GB of capacity… What he really has is a 500GB virtual volume that is thin provisioned, compressed, and backed by lower-tier disks. When he has a few data blocks that get really hot, the storage hypervisor dynamically moves just those blocks to higher tier storage like SSD’s. His virtual disk can be accessed anywhere across vendors, tiers and even datacenters. And in the background you have changed the vendor storage he is actually sitting on twice because you found a better supplier. But he doesn’t know any of this because he only sees the 500GB virtual volume you gave him. It’s 'in the cloud'."
"Let’s start with a quick walk down memory lane. Do you remember what your data protection environment looked like before virtualization? There was a server with an operating system and an application… and that thing had a backup agent on it to capture backup copies and send them someplace (most likely over an IP network) for safe keeping. It worked, but it took a lot of time to deploy and maintain all the agents, a lot of bandwidth to transmit the data, and a lot of disk or tapes to store it all. The topic of data protection has modernized quite a bit since then.
Fast forward to today. Modernization has come from three different sources – the server hypervisor, the storage hypervisor and the unified recovery manager. The end result is a data protection environment that captures all the data it needs in one coordinated snapshot action, efficiently stores those snapshots, and provides for recovery of just about any slice of data you could want. It’s quite the beautiful thing."
At this point, you might scratch your head and ask "Does this Storage Hypervisor exist, or is this just a theoretical exercise?" The answer of course is "Yes, it does exist!" Just like VMware offers vSphere and vCenter, IBM offers block-level disk virtualization through the SAN Volume Controller(SVC) and Storwize V7000 products, with a full management support from Tivoli Storage Productivity Center Standard Edition.
SVC has supported every release of VMware since the 2.5 version. IBM is the leading reseller of VMware, so it makes sense for IBM and VMware development to collaborate and make sure all the products run smoothly together. SVC presents volumes that can be formatted for VMFS file system to hold your VMDK files, accessible via FCP protocol. IBM and VMware have some key synergies:
Management integration with Tivoli Storage Productivity Center and VMware vCenter plug-in
VAAI support: Hardware-assisted locking, hardware-assisted zeroing, and hardware-assisted copying. Some of the competitors, like EMC VPLEX, don't have this!
Space-efficient FlashCopy. Let's say you need 250 VM images, all running a particular level of Windows. A boot volume of 20GB each would consume 5000GB (5 TB) of capacity. Instead, create a Golden Master volume. Then, take 249 copies with space-efficient FlashCopy, which only consumes space for the modified portions of the new volumes. For each copy, make the necessary changes like unique hostname and IP address, changing only a few blocks of data each. The end result? 250 unique VM boot volumes in less than 25GB of space, a 200:1 reduction!
Support for VMware's Site Recovery Manager using SVC's Metro Mirror or Global Mirror features for remote-distance replication.
Data center federation. SVC allows you to seamlessly do vMotion from one datacenter to another using its "stretched cluster" capability. Basically, SVC makes a single image of the volume available to both locations, and stores two physical copies, one in each location. You can lose either datacenter and still have uninterrupted access to your data. VMware's HA or Fault Tolerance features can kick in, same as usual.
But unlike tools that work only with VMware, IBM's storage hypervisor works with a variety of server virtualization technologies, including Microsoft Hyper-V, Xen, OracleVM, Linux KVM, PowerVM, z/VM and PR/SM. This is important, as a recent poll on the Hot Aisle blog indicates that [44 percent run 2 or more server hypervisors]!
Join the conversation! The virtual dialogue on this topic will continue in a [live group chat] this Friday, September 23, 2011 from 12 noon to 1pm EDT. Join me and about 20 other top storage bloggers, key industry analysts and IBM Storage subject matter experts to discuss storage hypervisors and get questions answered about improving your private storage environment.
This last one on how to build your own Watson, Jr. has gotten over 69,000 hits! While several people told me they plan to build their own, I have not heard back from anyone yet, so perhaps it is taking longer than expected.
IBM and Wellpoint announced this week that it will be [putting Watson to work] in healthcare. [Wellpoint] is one of the largest health benefits company in the United States, with over 70 million people served through its affiliate plans and its various subsidiaries. I am one of the development lab advocates for Wellpoint, and have been proud to work with the account team to help Wellpoint achieve their goals.
This marks the first commercial deployment of IBM Watson. This is a joint effort. IBM will develop the base IBM Watson for healthcare platform, and Wellpoint will then develop healthcare-specific solutions to run on this platform. Watson's ability to analyze the meaning and context of human language, and quickly process vast amounts of information to suggest options targeted to a patient's circumstances, can assist decision makers, such as physicians and nurses, in identifying the most likely diagnosis and treatment options for their patients.
Is this going to put doctors out of business? No. Physicians find it challenging to read and understand hundreds or thousands of pages of text, and put this into their practice. IBM Watson, on the other hand, can scan through hundred of millions of pages in just a few seconds to help answer a question or provide recommendations. Together, doctors armed with access to IBM Watson will be able to improve the quality and effectiveness of medical care.
From an insurance point of view, improving the quality of care will help reduce medical mistakes and malpractice lawsuits. This is a win-win for everyone except ambulance-chasing lawyers!