This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.
I can't believe we got snow this week on Valentine's Day! It didn't last long on the ground here in Tucson, but there are still some white caps in our mountains. For those of you "trapped" by snow, or too much work, here are two upcoming events you can attend from your desk and computer!
IBM Oracle Virtual University 2012
Please join us for the fourth annual IBM Oracle Virtual University that runs "live" for 24 hours, then continues 'on-demand' replay through the remainder of 2012.
From: Tuesday, February 21, 6:00 am US Eastern Time EST (6:00 pm China Time)
To: Wednesday, February 22, 6:00 am EST
This is a great educational event for IBM and Business Partner sales & technical teams who sell IBM Oracle solutions or have Oracle solutions installed in their account. It is for anyone who is new to or interested in the IBM Oracle Alliance as well as experienced sales & technical people who need all the latest on the IBM/Oracle co-opetition relationship for 2012 and beyond.
This VIRTUAL on-line event will cover key topics around the IBM Oracle Alliance. I am one of the speakers and will cover IBM System Storage offerings as they relate to Oracle software.
This is a chance for sellers to hear an update on what's new, unique and available to sell in 2012. The goal of this session is to help enable you to sell more IBM products and services with Oracle solutions in 2012! Learn where to go for help to better understand these solutions, close more deals and reach your targets.
Even through economic challenges, storage requirements have continued to grow along with the information explosion.
Join us for this informative webcast and hear from Jon Toigo, CEO and Managing Principal of Toigo Partners, as he discusses six cutting-edge storage technologies that are ready for prime time and can help transform your data center.
Date: Tuesday, February 28
Time: 1:00 pm EST, 12"00 pm CST, 10:00 am PST
The featured speaker is fellow blogger Jon Toigo, CEO and Managing Principal, Toigo Partners, an outspoken technology consumer advocate and vendor watchdog whose articles, columns, and blog posts on [DrunkenData.com] are enjoyed by over a million readers per month.
The old adage applies "You can't please everyone. Presidents can't. Prostitutes can't. Nobody can." I am reminded of that as I fielded a variety of interesting comments and emails about, of all things, my choice of order of things in recent blog posts.
Certainly, there are times when the order of things matters greatly. In my now-infamous blog post [Sock Sock Shoe Shoe], I use a scene from a popular 1970's television show to explain why compression should be done before encryption.
In my case, I put things in the order that I felt made sense to me, but not everyone agrees. Here are three recent examples:
In my blog post [Two IBMers Earn Their Retirement], I congratulated two of my colleagues on their retirement. Since their retirement happened on the same day, I decided to mention Mark Doumas first, and Jim Rymarczyk second.
However, one of my readers, who I will assume is a member of the unofficial "Jim Rymarczyk fan club", felt that I should have listed Jim first, as Jim served IBM for 44 years, and Mark only 32 years.
Really? I realize that movie stars insist on having their name listed first on the poster, but neither of these guys would be confused with George Clooney!
So, to Jim and all his fans out there, I assure you I did not mean this as a slight in any way. I have updated the post to indicate that the ordering was strictly alphabetical by last name.
In my blog post [IBM Announcements for February 2012], I presented tape products first, and disk second. Normally, I cover them alphabetically, disk first, then tape. However, I was asked to promote tape this year in preparation for the upcoming 60th anniversary of tape, so I mentioned the tape announcements first, and the disk second.
The feedback from the XIV community was swift. Many felt that I [buried the lede] in not mentioning the XIV Gen3 SSD caching first.
(Note: For those not familiar with the phrase used in journalism, 'burying the lede' refers to the failure to mention the most interesting or attention grabbing elements of a story in the first paragraph. In American news journalism, it is spelled "lede" and elsewhere it is spelled "lead". Major US dictionaries apparently accept both spellings for this phrase.)
Technically, my lead paragraph stated clearly that: "This week we have announcements for both disk and tape, but since 2012 is the 60th Diamond Anniversary for tape, I will start with tape systems first."
So, while I don't claim to be a journalist by any means, I think the lead paragraph accurately reflected that I would talk about both disk and tape products in the rest of the blog post, and if a reader didn't care to learn more about tape could bypass those sections and go directly to the section on disk instead.
I have had my head handed to me on a platter so many times here at IBM that I am considering installing a zipper around my neck. My friends in XIV land insisted that I write a secondary post about XIV Gen3 SSD caching that had no mention of tape whatsoever. One suggestion was to compare and contrast XIV Gen3 SSD caching with EMC's announcement for VFCache. The result was my blog post [IBM XIV Gen3 SSD Caching versus EMC VFCache].
What could go wrong with an apples-to-orange comparison of two different storage products sprinkled with a small amount of FUD against a major competitor?
I had two complaints on this one. First, is the order of products in my side-by-side table of comparisons. I put EMC VFCache in the left column, and IBM XIV Gen3 SSD caching in the right. I meant nothing sinister by this. Alphabetically, EMC comes before IBM, and VFCache comes before XIV. Chronologically, EMC's announcement came out on Monday, and IBM's announcement came out the following day.
(Note: The term [sinster] comes from the Latin word sinistra meaning "left hand". In the Middle Ages it was believed that when a person was writing with their left hand they were possessed by the Devil. Left-handed people were therefore considered to be evil. My poor mother was born left-handed and was forced as a child to write with her right hand to be accepted by society.)
Apparently, an unwritten convention within IBM is that comparison tables always have the newer product on the left column, followed by one or more older products to the right, or the IBM product on the left column, with one or more competitive alternatives to the right.
The second complaint came from a reader in the comments section: "... I think [what] you're doing is trying to ride EMC's release for your own marketing, did you really need to? XIV is an excellent array; adding SSD Cache to the Gen3 takes it further, Moshe would be fuming (which I think is a good thing), can you just stick to that and not ride someone else's wave?"
Both announcements relate to reducing latency of read IOPS through the use of Solid State Drives. That both companies would announce these were no surprise to any employee at either company, as both IBM and EMC have been talking about their intent to do so last year. IBM's announcement of XIV SSD Gen3 caching was certainly not in response to EMC's VFCache announcement, and I doubt EMC rushed out their VFCache announcement the day before as a pre-emptive strike against IBM's announcement of the XIV Gen3 SSD Caching feature.
(Note: I don't know her personally, but she has thousands of followers!)
There you have it. I will gladly fix false or misleading information, but I am not going to re-arrange the order of things just to please some readers, only to have other readers complain that they liked it better in the original order. As always, feel free to comment on any of this in the section below.
Most readers know thta Tucson is home of one of the largest collections of world-renowned experts on IT storage. But what you may not know, is that Tucson is also the home of experts for optical sciences. This week, I was part of a delegation of IBMers invited on a tour of the Steward Observatory Mirror Lab [SOML].
SOML was built in 1990 underneath the football stadium at the University of Arizona. Why under the stadium? Their motivation was [Chicago Pile-1], the world's first nuclear reactor, built by Enrico Fermi under the football stadium at the University of Chicago.
At other mirror labs, mirrors start as a large, heavy, flat piece of glass and then ground and polished to the correct parabolic curve. SOML created a new process that works a lot better, similar to making a [Pineapple Upside Down Cake]. For those who are not familiar with this cake, you arrange sliced pineapple rings on the bottom of the baking dish, then pour the liquid cake batter that fills in and around the pineapple slices, then bake.
The first step is creating a base of 1,690 hexoganal tubes made of Aluminum Silicate. These are like the pineapple rings in the cake. The tubes are bolted to the baking dish that is 8.4 meters wide. These tubes form the base of the [parabolic shape] that focuses starlight to a small focal point. The tubes are spaced with about an inch of space in between. The Aluminum silicate feels like clay.
Once the base is built, chunks of glass are placed on the surface. Rather then pouring on the cake mix of molten glass, these chunks will be melted in place. This isn't normal glass, but a special Boron Silicate glass that does not expand or contract much during changes in temperature, made by the [Ohara Corporation] in Japan.
The oven is then lowered onto the baking dish. Once the temperature reaches 700 degrees, the entire system is then rotated at 7 RPM. This allows the glass to melt and take its parabolic shape through [centrifugal force]. The people who run the oven are called "oven pilots", and they monitor the entire process to make sure nothing goes wrong.
This particular mirror is one of the two that will go into the [Large Binocular Telescope]. The mirror will be 36 inches thick at the edges, and 18 inches in the middle. If the glass cools down to quickly, it may crack or form crystals, so instead the oven is kept in place and the temperature lowered slowly over the course of a few months. This is called annealing.
Once a mirror has annealed, 24 suction cups are glued to the top surface to pull the mirror out of the baking dish. It is then tipped on its side so that all the bolts can be removed and the hexagonal tubes washed out, leaving behind a honey-combed effect on the bottom of the mirror. This means the mirror is 80 percent air, making it strong and lightweight.
The next step is grinding the surface with diamonds. In most cases, the process of spinning creates the correct shape so little grinding is required. However, for this mirror here for the Large Synoptic Survey Telescope [LSST], about five tons of glass will be ground out of the center. This will actually have two parabolic curves, the outer curve is shallow, and the inner curve is deep. This will allow for the LSST to survey a wide area of space at a time.
Once the glass is ground to the right shape, it will be polished with Cerium Oxide, what is commonly known as Jeweler's Rouge. How smooth does it have to be? If this mirror were the size of the United States, there would be no bump higher than 2 inches tall!
Most mirrors are symmetrical, so the polishing can be done on a spinning platform, but this mirror is not. The Large Magellan Telescope will consist of seven mirrors, one in the middle that is symmetrical, and surrounded by six other mirrors that will all continue the parabolic shape in each direction. This is one of the outer mirrors, which means that each part of the polishing process will be controlled by computers to get exactly the curve required.
Here is a small scaled-down model of the Magellan Telescope. Each of the seven mirrors will be 8.4 meters wide. At this point, one person asked why all the mirrors were 8.4 meters wide. I joked that this was the size of the oven! It reminded me of [the story where newly-wed had to ask her grandmother why she cut the ends off the pot roast]. The actual reason was that the posts of the football stadium are 8.5 meters wide, so any mirror made inside the lab larger than that could not be removed easily for transportation.
The LMT will be installed on [Cerro Tololo] in Chile, where my father worked earlier in his career. Why Chile? Observatories need high altitude, dry climate and clear skies. That is why Arizona is home to many observatories, including Kitt Peak National Observatory and the Vatican Observatory on Mount Graham. Cerro Tololo in Chile is close to the equator and meets these requirements.
Once operational in 2020, it will gather 6 TB of images every evening. That got all of the IBMers on the tour very excited!
To verify the polishing is complete, it is put on three red stands and measured with a laser. Once the measurements are complete. The surface will be coated with aluminum to provide the reflective surface. You can't just paint the surface with a roller! Instead, the aluminum is vaporized and allowed to land on the surface of the mirror evenly, in a layer that is only three molecules thick. There is more aluminum in standard size beer can than on the surface of one of these 8.4 meter size mirrors!
So that was the tour. It took almost 2 hours. If you are ever in Tucson, consider contacting the SOML and arranging a tour for yourself. There is no other mirror lab like it!
This week is IBM Pulse2012 conference in Las Vegas. I am not there, for medial reasons this time. While my colleagues will be spending this week sipping Margaritas and enjoying the music in between inspiring technical sessions, I will be flat on my back, getting all my nutrients from a tube connected to my arm, listening to the hospital equivalent of [Muzak].
"IBM Pulse 2012 ‘s opening keynote talked about the realities of cloud as a delivery model – without the ‘private-‘, or the ‘public-‘, or even the quotes or capitalization of “The Cloud.” It was IBM’s perspective on what IBM knows better than most, how to deliver enterprise IT services that map to strategic business goals."
"In contrast to talking about ‘data-center/cloud’ stuff and then later about ‘consumerization-of-IT’ stuff , IBM’s core message was how mobility was in many ways driving cloud evolution."
"...cloud-based delivery was ‘more than just virtualization’"
"...the US Dept of Labor stating that jobs related to technology are forecast to be among the fastest growing segment thru 2018."
Hopefully, this post will hold you over until I regain consciousness.
Did you miss IBM's Pulse 2012 conference? So did I. Last month, I told you all to [mark your calendars], but wasn't sure if I would be there myself or not.
I was invited to attend Pulse this year, but had to instead go to the Hospital for surgery and spend the week recovering. I thought I made that clear on my last post that I would be spending [the week on my back, with a tube in my arm], but apparently, people missed that subtlety.
The tube was actually connected to the back of my left hand, and I was tempted to take pictures of the entire process, but decided not to, since my gown had no pockets to hold my camera. Perhaps it is better it went undocumented. The less you see of the inner workings of a hospital, as a patient, the better. The whole things was quite a blur.
Despite a few mishaps, I managed to survive the week. Many thanks to Hilda, Dina, Crystal, Marcie, Mike, Joe, Ryan, Sue, Debra, Donna, Modrechai, and the rest of the fine medical staff at St. Joseph's for their hospitality! And of course, many thanks to Mo, my parents and sisters for helping me through the recovery!
Fortunately, for those like me who were unable to go to Las Vegas last week, there is the [IBM Pulse2012 Video Library] with highlights of the keynotes and other sessions during the week.
Five years ago, I sprayed coffee all over my screen from something I read on a blog post from fellow blogger Hu Yoshida from HDS. You can read what cased my reaction in my now infamous post [Hu Yoshida should know better]. Subsequently, over the years, I have disagreed with Hu on a variety of of topics, as documented in my 2010 blog post [Hu Yoshida Does It Again].
(Apparently, I am not alone, as the process of spraying one's coffee onto one's computer screen while reading other blog posts has been referred to as "Pulling a Tony" or "Doing a Tony" by other bloggers!)
Fortunately, my IBM colleague David Sacks doesn't drink coffee. Last month, David noticed that Hu had posted a graph in a recent blog entry titled [Additional Storage Performance Efficiencies for Mainframes], comparing the performance of HDS's Virtual Storage Platform (VSP) to IBM's DS8000.
For those not familiar with disk performance graphs, flatter is better, lower response time and larger IOPS are always desired. This graph implies that the HDS disk system is astonishingly faster than IBM's DS8000 series disk system. Certainly, the HDS VSP qualifies as a member of the elite [Super High-End club] with impressive SPC benchmark numbers, and is generally recognized as a device that works in IBM mainframe environments. But this new comparison graph is just ridiculous!
(Note: While SPC benchmarks are useful for making purchase decisions, different disk systems respond differently to different workloads. As the former lead architect of DFSMS for z/OS, I am often brought in to consult on mainframe performance issues in complex situations. Several times, we have fixed performance problems for our mainframe clients by replacing their HDS systems with IBM DS8000 series!)
Since Hu's blog entry contained very little information about the performance test used to generate the graph, David submitted a comment directly to Hu's blog asking a few simple questions to help IBM and Hu's readers determine whether the test was fair. Here is David's comment as submitted:
(Disclosure: I work for IBM. This comment is my own.)
I was quite surprised by the performance shown for the IBM DS8000 in the graph in your blog. Unfortunately, you provided very little detail about the benchmark. That makes it rather difficult (to say the least) to identify factors behind the results shown and to determine whether the comparison was a fair one.
Of the little information provided, an attribute that somewhat stands out is that the test appears to be limited to a single volume at least, that's my interpretation of "LDEV: 1*3390-3"? IBM's internal tests for this kind of case show far better response time and I/Os per second than the graph you published.
Here are a few examples of details you could provide to help readers determine whether the benchmark was fair and whether the results have any relevance to their environment.
What DS8000 model was the test run on? (the DS8000 is a family of systems with generations going back 8 years. The latest and fastest model is the DS8800.)
What were the hardware and software configurations of the DS8000 and VSP systems, including the number and speed of performance-related components?
What were the I/O workload characteristics (e.g., read:write ratio and block size(s))?
What was the data capacity of each volume? (Allocated and used capacity.)
What were the cache sizes and cache hit ratios for each system? (The average I/O response times under 1.5 milliseconds for each system imply the cache hit ratios were relatively high.)
How many physical drives were volumes striped across in each system?"
Unlike my blog on IBM, HDS bloggers like Hu are allowed to reject or deny comments before they appear on his blog post. We were disappointed that HDS never posted David's comment nor responded to it. That certainly raises questions about the quality of the comparison.
So, perhaps this is yet another case of [Hitachi Math], a phrase coined by fellow blogger Barry Burke from EMC back in 2007 in reference to outlandish HDS claims. My earliest mention was in my blog post [Not letting the Wookie Win].
By the way, since the test was about z/OS Extended Address Volumes (EAV), it is worth mentioning that IBM's DS8700 and DS8800 support 3390 volume capacities up to 1 TB each, while the HDS VSP is limited to only 223 GB per volume. Larger volume capacities help support ease-of-growth and help reduce the number of volumes storage administrators need to manage; that's just one example of how the DS8000 series continues to provide the best storage system support for z/OS environments.
Personally, I am all for running both IBM and HDS boxes side-by-side and publishing the methodology, the workload characteristics, the configuration details, and the results. Sunshine is always the best disinfectant!
HDP brings the performance benefits of automated wide striping and HDT automatically keeps the hot pages of data on the highest performance tier of storage for mainframes, just as it does for open systems. There are differences between open systems and mainframe implementation due to mainframe CKD and CCHHR formats for instance, the page size is optimized for mainframe storage formats and storage reclamation must be host initiate. For more information check out our website: http://www.hds.com/assets/pdf/how-to-apply-latest-advances-in-hitachi-mainframe-storage.pdf
There are also additional performance efficiencies specific for mainframes.
Mainframe HDP is the foundation for Extended Addressable Volumes, which increases the size of 3390 volumes from 65,520 cylinders to 262,668 cylinders. This, along with HyperPAV--which facilitates multiple accesses to a volume, addressing the problem of queuing on a very large volume with a single UCB--enhances throughput with many more concurrent I/O operations.
The thin provisioning of HDP also increases the performance of mainframe functions that move, copy, or replicate these thin volumes like Concurrent Copy, FlashCopy V02, and HUR, since the actual volumes are smaller.
If you have mainframes, check out the capacity and performance efficiency of VSP with HDP and HDT.
At this point, you might be wondering: "If Hu Yoshida deleted his blog post, how did Tony get a copy of it? Did Tony save a copy of the HTML source before Hu deleted it?" No. I should have, in retrospect, in case lawyers got involved. It turns out that deleting a blog post does not clear the various copies in various RSS Feed Reader caches. I was able to dig out the previous version from the vast Google repository. (Many thanks to my friends at Google!!!).
(Lesson to all bloggers: If you write a blog post, and later decide to remove it for whatever legal, ethical, moral reasons, it is better to edit the post to remove offending content, and add a comment that the post was edited, and why. Shrinking a 700-word article down to 'Sorry Folks - I decided to remove this blog post because...' would do the trick. This new edited version will then slowly propagate across to all of the RSS Feed Reader caches, eliminating most traces to the original. Of course, the original may have been saved by any number of your readers, but at least if you have an edited version, it can serve as the official or canonical version.)
Perhaps there was a reason why HDS did not want to make public the FUD its sales team use in private meetings with IBM mainframe clients. Whatever it was, this appears to be another case where the cover-up is worse than the original crime!
"This week, IBM is launching a companywide effort to build the digital eminence of all IBMers. The goal is to arm you with the tools and knowledge to effectively use emerging technologies -- such as social, mobile, and cloud computing -- for strategic advantage."
This is how Rod Adkins, IBM Senior VP of Systems Technology Group, and my sixth-line manager, starts a memo to declare April "Digital IBMer awareness month". I am not sure if this is just for this April, or every April going forward. Included with this is a set of ten guidelines to improve CyberSecurity:
In honor of this, I will be spending the next two weeks traveling through Europe. Instead of bringing a large suitcase and my laptop, I have decided instead to only take:
The clothes I am wearing on the plane
A heavy jacket with lots of pockets
A backpack with 15 pounds of clothes
A hipsack with my smartphone, digital camera, MP3 player and all the related adapters, chargers and cables
My smartphone uses a GSM chip, so I should be able to get a European SIM when I arrive. I have not booked any hotels, tours, or transportation. Instead, I will rely on social media and cloud computing to take care of things on a daily basis.
(Why only 15 pounds of clothing? I just had major surgery two weeks ago, and my doctor advised me not to lift more than 15 pounds for the next six weeks!)
I plan to have a series of blog posts documenting what I learn from this trip. For those who want to follow along, I will be tweeting from @az990tony. You do not need a Twitter account to read my tweets. You can read them directly from [http://twitter.com/#!/az990tony].
I can't remember the last time I have gone this long without the comforts of my laptop or desktop, so it will be interesting how it works out!
Has it been a week already? I am here in Europe checking out various options for mobile, social media and cloud on my "Digital IBMer" tour. Here´s where we have been so far...
We landed at the Frankfurt airport, which will serve as our starting and ending point. It is close to Mainz where my IBM colleagues at the Executive Briefing Center for Germany is located. I looked throughout the airport for a SIM chip for my smartphone that worked in all European countries, but nobody had one for sale. We had lunch while we wait for the train to Brussels.
Our next stop was Brussels, capital of Belgium. The Belgians speak Flemish, which is like a Belgian version of Dutch, and French. I don´t speak Flemish nor Dutch, so I have been able to get by on French here. The Hotel Opera was near the central station, but we got off at the Bruxelles-Midi, thinking that Midi meant middle, or central of the city, but is Flemish (er.. make that French) for South instead, so we had a bit of walking to do!
Bruges is only an hour train ride from Brussels and is worth seeing. Our Eurail pass makes it easy just to go from city to city by train. Our particular one allows us first class travel through 23 countries for 15 contiguous days. We had lunch at the central square, and for dessert... Belgian Waffle-on-a-stick! Mine was covered in powdered sugar, and soon the rest of me was also.
Through tweets on Twitter, I was able to meet up with Stef, a local storage administrator and fan of my blog, and go out for beers. Stef was kind enough to lend me a pre-paid SIM chip for my phone that provided data plan while I am in Belgium! Thank you Stef!
Amsterdam, The Netherlands
Not surprisingly, Amsterdam is one of my favorite cities. It´s like Las Vegas without casinos. Our hotel, The Bulldog, is conveniently located in the center of town.
I met up with Joanne, a professional cellist (yes, she plays the Cello musical instrument for a living) who took us on a tour of the MuzikGebouw, which is where they hold concerts and events. Using the "Amsterdam City Guide" app from Travel Advisor on my smartphone, we followed one of their suggested self-guided walking tours. We also went to the Rijksmuseum, which is under construction, so only a subset of the art is on display.
From Amsterdam, we took a night train to Copenhagen. This is a 15-hour train ride, no dinner, but they give you breakfast. Men and women are in separate sleeping cars, and I was paired up with a business man, Danny, from Tiawan trying to sell clothing for firefighters.
Until now, I have managed with German, French and English, but I wasn´t sure about Danish, so I brought this "European Phrase Book" that has 14 languages. We stayed at the DanHostel, conveniently located near"Tivoli Park".
We have safely arrived to Berlin. Our train from Copenhagen to Hamburg went on a ferry boat to cross over the water! We are staying at Plus Berlin Hostel,which has a nice indoor swimming pool and dry sauna.
Until now, we have had beautiful sunny weather, but today is cold and dreary. We started out taking photos of all the graffiti in East Berlin we could find, but it started raining, so we changed plans and went to the world famous Pergamonmuseum.
Well, that´s my first week of adventure. Tomorrow, we leave for Prague in the Czech Republic!
Well, another week has gone by, and I am now back from my grand "Digital IBMer" trip to Europe! Here's what the second week involved.
Prague, Czech Republic
The cold and rainy weather followed us from Berlin! We were able to go to the old castle, light a candle for a friend in the hospital at the St. Vitus Cathedral, and walk across the famous Charles Bridge to go see the Astronomical Clock.
We stayed in the "Blind Eye" hostel, which was an awesome place, with friendly and helpful staff.
The weather was much nicer in Vienna, giving us a chance to see the palace and surrounding gardens. In front of the palace was an "Easter Market" where booths sold various arts and crafts, as well as delicious food and drink. I had a slab of ham, a pile of mustard, and a cup of [Glühwein], a hot drink made from mulled red wine.
I met several people at the hostel Ruthensteiner, from the UK, Argentina and Spain, and we all went out drinking at a Polish pub down the street.
The next morning we walked through the city center. We learned that this week leading up to Easter Sunday--known as Semana Santa in some countries--was also "Spring Break" for many students, which explained why we were starting to have a harder time finding hostels to stay at.
Salzburg means "City of Salt" and the salt mines in the area allowed the landlords to get rich. If you have seen the movie [The Sound of Music] then you already know how beautiful Salzburg is. The castle was incredible, and was used for military purposes until 1861, when it was opened to the public.
Inside the castle is an awesome museum for [Marionettes], which are puppets controlled from above by strings, still used in productions today.
Unable to find a youth hostel, we stayed in the lovely Alderhof Pension Hotel. It was quiet and well-situated near the main train station.
At Munich, we decide to take [Sandeman's "New Europe" free guided city walking tour]. It is free, in that the tour guides work entirely for tips. Tours were available in English or Spanish. This was about three hours long, and we gladly tipped heavily for such an informational tour of everything from the Glockenspiel to the Residenz palace. One stop on the tour was to see the main "Beer Garden" where rows and rows of people enjoying beer in the beautiful weather.
While in Munich, I was invited to see a sneak preview of the movie [Iron Sky], a campy, politically-incorrect, low-budget sci-fi comedy made in Europe with a mix of English language dialogue, and German language dialogue with English subtitles. The year is 2018, a woman that looks a lot like Sarah Palin is now president of the United States, and Nazis that have set up a moon-based space station back in 1945 are ready to attack. If you liked the movies "White Chicks" and "Battlefield Earth", then you might enjoy this one as well. You may need to know a bit about the history of the third Reich, the operas of Wagner, and the movie [The Great Dictator] by Charlie Chaplin, to make sense of some of the inside jokes.
We visited Heidelberg on [Good Friday and the place was a ghost town. The streets were nearly empty, and the tourist shops didn't open until 10am. Despite this, we managed to take the funicular train up the mountain to visit the castle, visit an interesting Pharmacy Museum, see the world's largest wine barrel, have a traditional German lunch, and take pictures of the old stone bridge.
We got back to Frankfurt and left Saturday morning to fly back to the United States.
We managed to visit 11 cities in six different countries over the course of 16 days. I was able to learn quite a lot about the use of mobile apps to book hotels and find the appropriate trains to get around each country, take advantage of social media to determine what to see and do, and the use of cloud to store my photos, videos and notes along the way.
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
This week I'm in Argentina, teaching IBM Business Partners and sales reps about the latest System Storage products. Encouraged by my success on my Digital IBMer tour last month in Europe, I decided to get a SIM chip for my smartphone here in Buenos Aires.
I did my homework. There are three major mobile service providers that offer pre-paid GSM-based SIM chips: Claro, Movistar, and Personal. I arrived on Sunday morning, but thanks to the local [blue laws], none of them were open. I was able to walk around and find retail outlets for each within blocks of my hotel.
All three offer voice and SMS text messaging, but online reviews indicated that Movistar offered the best data plan. I was there at 9:30am sharp, the moment the Movistar store opened Monday morning. The lovely young lady behind the counter was quite helpful. She put the SIM chip in my phone, but then told me it might be an hour or two before it was activated. I would receive an SMS text message welcoming me to the Movistar network. She provided my new 12-digit phone number, along with instructions on how to check my balance (*444) or call for technical assistance (*611).
(FTC Disclosure: even though I am not in the United States as I write this, the U.S. Federal Trade Commission rules require that I mention that this blog post is not intended as a paid or celebrity endorsement for any of the cellphone service providers mentioned. I work for IBM, and this post is based entirely on my personal experience.)
Why not just use international roaming available on my US plan? International roaming is quite expensive! I made the mistake of uploading three hi-res photos to Flickr last year in New Zealand to discover this the hard way. Here is a comparison chart:
Voice calls (per minute)
$2.80 pesos (about $0.64 USD)
SMS text (per message sent)
$0.90 pesos (about $0.20 USD)
$10.00 pesos for 1GB across 2 days (about $2.27 USD)
(If your spouse or significant other threatens to leave you if you don't call her every day while out of the country, remind her that divorce attorneys are less expensive than these international roaming rates! Fortunately, all of my friends and family know this and are quite understanding if they don't here from me as often as they would like.)
The SIM chip cost only 30 pesos (about seven bucks). Normally, SIM chips come without credit, but their current promotion included 20 pesos credit for voice calls (enough for 7 minutes of talking), and 200 free SMS text messages.
Six hours later, my phone still was not yet activated. I returned to the store Monday afternoon to ask what was going on. She decided the chip must be bad, gave me a second one, and assigned me a new phone number. I would then have to wait again another hour or two for the welcome message.
Monday evening, a grey window pops up, "Bienvenidos a Movistar" so I thought it was activated, but it wasn't exactly the SMS text message the young lady told me would happen. Sure enough, neither *444 nor *611 worked, giving me voice responses that my phone is not yet activated, and please wait another hour.
Tuesday morning, I am back at the Movistar outlet. The young lady was not happy to see me. She confirmed my second chip was not yet activated, but felt she did nothing wrong. She insisted the problem was either with my phone, or with the Movistar main office, but that she did everything correctly by the book.
(I realize that the sales clerks at these outlet stores don't have a Ph.D. in digital telephony or electrical engineering. I was not angry, nor trying to blame her individually for all of the problems we encountered. Getting a smartphone manufactured in South Korea for the US market to work in Argentina is challenging enough. Given all the difficulties I had last month in Europe, I know it is not limited to Latin America.)
Either way, I told her, if we can't get my phone working, I would like my 30 pesos refunded and promised she would never see me again.
Her response was classic. She would rather not-see me-again because I was delighted with the Movistar service, rather than not-see me-again because we were unable to get it working. She offered to contact the main office to figure out what was going on, and that I should come back in an hour or two. She did not want to lose my business, nor have me go to one of her two main competitors. Now that's customer service!
Tuesday afternoon, I return. She now was instructed on how to do some basic problem determination. We put my new SIM chip into a test phone, and confirmed it was not my phone having problems. The chip did not work in the test phone either. She called the main office, and they were able to activate the chip in the test phone, and then she transferred the chip back to my phone. I asked her to please call my new phone number to confirm it was now working, and I was able to send a quick text message to confirm that was also working. The *444 indcated that my balance was now down to 19.29 pesos. Apparently, it cost me 71 centavos to receive her phone call.
(Just as we were wrapping up, a young man walks in with his phone wanting a SIM chip. None of the Movistar staff spoke English, he did not speak Spanish, but luckily I speak both fluently and was able to translate.
First, we confirmed his phone was still locked, and that he would need to contact his AT&T provider to get an unlock code. He should then come back with the unlock code and his passport to then buy the chip. He didn't understand why Movistar needed his passport for a pre-paid plan, so I had to explain to him at length Argentinian law, the Denied Parties List, the ongoing war against terror and drug trafficking, and how he would have to agree to their Terms and Conditions to use their service, even if there is no ongoing monthly service contract.
He thanked me, promised to return with both his unlock code and passport, and told me my English was "quite good"!)
The next step was to activate my data plan. For this, I would need to buy additional credit. Scratch cards to add credit to your pre-paid phone, referred to locally as "Tarjeta de Recarga", come in 20 and 30-peso denomnations, but are not sold at the Movistar outlet. Instead, the young lady told me to get one at any kiosk or corner convenience store.
As it turns out, not every convenience store offers these cards for Movistar, but after a few blocks, I was able to find one that did. The process is simple: call *444, follow the Spanish-language prompts, scratch off the back of the card, and enter the 16-digit code. I bought a 20-peso card (about $4.50 USD), followed the procedure, and got my confirmation text, indicating that I qualified for 10 extra pesos as a gift for being a new customer, so my new balance was now $49.29 pesos. Woo-hoo!
Now that my phone was armed with enough credit, all I had to do was send an SMS text message containing the word "Datos" to the Movistar phone number 2345. A text message response indicated my data plan was now active. I will have to do this every other day, as the plan is 1GB per 2-day period, but I have enough credit to last me the rest of the week here. To get my phone to detect the new status, I had to turn on data packet traffic, configure and validate the Access Point Name (APN) information, then reboot the phone.
The data plan service is based on the General Packet Radio Service [GPRS] protocol. GPRS is a best-effort service, resulting in variable throughput and latency that depends on the number of other users sharing the service concurrently. Speeds are comparable to dial-up rates, 56 to 114 Kbps.
For those of us spoiled on T-Mobile's 4G speeds in the USA, GPRS is terribly slow. But that's OK. I doubt I will go over the 1GB limit. Overall, I am quite pleased with my success. My phone is fully functional for the week, and all for less than the cost of a single glass of Malbec in the Hilton lobby bar!
This week, I am in beautiful Sao Paulo, Brazil, teaching Top Gun class to IBM Business Partners and sales reps. Traditionally, we have "Tape Thursday" where we focus on our tape systems, from tape drives, to physical and virtual tape libraries. IBM is the number #1 tape vendor, and has been for the past eight years.
(The alliteration doesn't translate well here in Brazil. The Portuguese word for tape is "fita", and Thursday here is "quinta-feira", but "fita-quinta-feira" just doesn't have the same ring to it.)
In the class, we discussed how to handle common misperceptions and myths about tape. Here are a few examples:
Myth 1: Tape processing is manually intensive
In my July 2007 blog post [Times a Million], I coined the phrase "Laptop Mentality" to describe the problem most people have dealing with data center decisions. Many folks extend linearly their experiences using their PCs, workstations or laptops to apply to the data center, unable to comprehend large numbers or solutions that take advantage of the economies of scale.
For many, the only experience dealing with tape was manual. In the 1980s, we made "mix tapes" on little cassettes, and in the 1990s we recorded our favorite television shows on VHS tapes in the VCR. Today, we have playlists on flash or disk-based music players, and record TV shows on disk-based video recorders like Tivo. The conclusion is that tapes are manual, and disk are not.
Manual processing of tapes ended in 1987, with the introduction of a silo-like tape library from StorageTek. IBM quickly responded with its own IBM 3495 Tape Library Data Server in 1992. Today, clients have many tape automation choices, from the smallest IBM TS2900 Tape Autoloader that has one drive and nine cartridges, all the way to the largest IBM TS3500 multiple-library shuttle complex that can hold exabytes of data. These tape automation systems eliminate most of the manual handling of cartridges in day-to-day operations.
Myth 2: Tape media is less reliable than disk media
For any storage media to be unreliable is to return the wrong information that is different than what was originally stored. There are only two ways for this to happen: if you write a "zero" but read back a "one", or write a "one" and read a "zero". This is called a bit error. Every storage media has a "bit error rate" that is the average likelihood for some large amount of data written.
According to the latest [LTO Bit Error rates, 2012 March], today's tape expects only 1 bit error per 10E17 bits written (about 100 Petabytes). This is 10 times more reliable than Enterprise SAS disk (1 bit per 10E16), and 100 times more reliable than Enterprise-class SATA disk (1 bit per 10E15).
Tape is the media used in "black boxes" for airplanes. When an airplane crashes, the black box is retrieved and used to investigate the causes of the crash. In 1986, the Space Shuttle Challenger exploded 73 seconds after take-off. The tapes in the black box sat on the ocean floor for six weeks before being recovered. Amazingly, IBM was able to successfully restore [90 percent of the block data, and 100 percent of voice data].
Analysts are quite upset when they are quoted out of context, but in this case, Gartner never said anything closely similar to this. Nor did the other analysts that Curtis investigated for similar claims. What Garnter did say was that disk provides an attractive alternative storage media for backup which can increase the performance of the recovery process.
Back in the 1990s, Savur Rao and I developed a patent to help backup DB2 for z/OS by using the FlashCopy feature of IBM's high-end disk system. The software method to coordinate the FlashCopy snapshots with the database application and maintain multiple versions was implemented in the DFSMShsm component of DFSMS. A few years later, this was part of a set of patents IBM cross-licensed to Microsoft for them to implement a similar software for Windows called Data Protection Manager (DPM). IBM has since introduced its own version for distributed systems called IBM Tivoli FlashCopy Manager that runs not just on Windows, but also AIX, Linux, HP-UX and Solaris operating systems.
Curtis suspects the "71 percent" citation may have been propogated by an ambitious product manager of Microsoft's Data Protection Manager, back in 2006, perhaps to help drive up business to their new disk-based backup product. Certainly, Microsoft was not the only vendor to disparage tape in this manner.
A few years ago, an [EMC failure brought down the State of Virginia] due to not just a component failure it its production disk system, but then made it worse by failing to recover from the disk-based remote mirror copy. Fortunately, the data was able to be restored from tape over the next four days. If you wonder why nobody at EMC says "Tape is Dead" anymore, perhaps it is because tape saved their butts that week.
(FTC Disclosure: I work for IBM and this post can be considered a paid, celebrity endorsement for all of the IBM tape and software products mentioned on this post. I own shares of stock in both IBM and Google, and use Google's Gmail for my personal email, as well as many other Google services. While IBM, Google and Microsoft can be considered competitors to each other in some areas, IBM has working relationships with both companies on various projects. References in this post to other companies like EMC are merely to provide illustrative examples only, based on publicly available information. IBM is part of the Linear Tape Open (LTO) consortium.)
Myth 4: Vendors and Manufacturers are no longer investing in tape technology
IBM and others are still investing Research and Development (R&D) dollars to improve tape technology. What people don't realize is that much of the R&D spent on magnetic media can be applied across both disk and tape, such as IBM's development of the Giant Magnetoresistance read/write head, or [GMR] for short.
Most recently, IBM made another major advancement with tape with the introduction of the Linear Tape File Systems (LTFS). This allows greater portability to share data between users, and between companies, but treating tape cartridges much like USB memory sticks or pen drives. You can read more in my post [IBM and Fox win an Emmy for LTFS technology]!
Next month, IBM celebrates the 60th anniversary for tape. It is good to see that tape continues to be a vibrant part of the IT industry, and to IBM's storage business!
There is still time to enroll for [IBM Edge], a conference focused on storage, to be held June 4-8 in Orlando, Florida. There is an early-bird discount until May 6!
I will be there all week! Here are the seven sessions I will be presenting at the Technical Edge side of the event:
Understanding Your Options for Storing Archive Data to Meet Compliance Challenges
This session will cover the IBM software and hardware solutions that your organization can use to store archive data, including features like immutability, Write-Once-Read-Many (WORM) technology and Non-Erasable, Non-Rewriteable (NENR) enforcement. The discussion will include high-level concepts like chronological and event-based retention, litigation hold and release, as well as an overview of the products and solutions from IBM that you can deploy today.
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy!
In 2011, the IBM Watson computer was able to beat the top-earning human winners on the trivia game-show “Jeopardy!” As I was the author of [How to Build Your Own Watson Junior in Your Basement], I have been asked to explain how the IBM Watson system was put together, how it works, and what examples of text mining and big data analytics means for society as we apply technology to meet tomorrow's challenges.
Using Social Media for IBM System Storage - Birds of a Feather
I will be moderating this Birds of a Feather, or BOF, session that will bring together a Q&A panel of experts on how social media can be leveraged to help you do your job, get the information you need to solve problems, and share your knowledge with others.
Data Footprint Reduction: Understanding IBM Storage Efficiency Options
Data Footprint Reduction is the catch-all term for a variety of technologies designed to help reduce storage costs. In this session, I will cover thin provisioning, space-efficient copies, deduplication and compression technologies, and describe the IBM storage products that provide these capabilities.
IBM's Storage Strategy in the Smarter Computing Era
Confused about IBM's new initiatives for Big Data analytics, Workload Optimized Systems, and Cloud Computing? This session will explain it all, and how IBM's strategy for its various storage products and solutions fit into these overall themes.
IBM SONAS and the IBM Cloud Storage Taxonomy
Confused over the different types of cloud storage? IBM's scale-out Network Attached Storage (SONAS) can be used in a variety of use cases. This session will provide an overview of IBM's SONAS solution, provide an update on the latest features and functions recently announced, and explain how it can be deployed in various private, public and hybrid cloud environments.
IBM Tivoli Storage Productivity Center Overview and Update
IBM has enhanced its premier storage infrastructure management tool: IBM Tivoli Storage Productivity Center. This session will provide both an overview of the product, and explain the latest features and functions recently announced.
Those that prefer to work with one-stop shopping of an IT Supermarket, with companies like IBM, HP and Dell who offer a complete set of servers, storage, switches, software and services, what we call "The Five S's".
Those that perfer shopping for components at individual specialty shops, like butchers, bakers, and candlestick makers, hoping that this singular focus means the products are best-of-breed in the market. Companies like HDS for disk, Quantum for tape, and Symantec for software come to mind.
My how the IT landscape for vendors has evolved in just the past five years! Cisco starts to sell servers, and enters a "mini-mall" alliance with EMC and VMware to offer vBlock integrated stack of server, storage and switches with VMware as the software hypervisor. For those not familiar with the concept of mini-malls, these are typically rows of specialty shops. A shopper can park their car once, and do all their shopping from the various shops in the mini-mall. Not quite "one-stop" shopping of a supermarket, but tries to address the same need.
("Who do I call when it breaks?" -- The three companies formed a puppet company, the Virtual Computing Environment company, or VCE, to help answer that question!)
Among the many things IBM has learned in its 100+ years of experience, it is that clients want choices. Cisco figured this out also, and partnered with NetApp to offer the aptly-named FlexPod reference architecture. In effect, Cisco has two boyfriends, when she is with EMC, it is called a Vblock, and when she is with NetApp, it is called a FlexPod. I was lucky enough to find this graphic to help explain the three-way love triangle.
Did this move put a strain on the relationship between Cisco and EMC? Last month, EMC announced VSPEX, a FlexPod-like approach that provides a choice of servers, and some leeway for resellers to make choices to fit client needs better. Why limit yourself to Cisco servers, when IBM and HP servers are better? Is this an admission that Vblock has failed, and that VSPEX is the new way of doing things? No, I suspect it is just EMC's way to strike back at both Cisco and NetApp in what many are calling the "Stack Wars". (See [The Stack Wars have Begun!], [What is the Enterprise Stack?], or [The Fight for the Fully Virtualized Data Center] for more on this.)
(FTC Disclosure: I am both an employee and shareholder of IBM, so the U.S. Federal Trade Commission may consider this post a paid, celebrity endorsement of the IBM PureFlex system. IBM has working relationships with Cisco, NetApp, and Quantum. I was not paid to mention, nor have I any financial interest in, any of the other companies mentioned in this blog post. )
Last month, IBM announced its new PureSystems family, ushering in a [new era in computing]. I invite you all to check out the many "Paterns of Expertise" available at the [IBM PureSystems Centre]. This is like an "app store" for the data center, and what I feel truly differentiates IBM's offerings from the rest.
The trend is obvious. Clients who previously purchased from specialty shops are discovering the cost and complexity of building workable systems from piece-parts from separate vendors has proven expensive and challenging. IBM PureFlex™ systems eliminate a lot of the complexity and effort, but still offer plenty of flexibility, choice of server processor types, choice of server and storage hypervisors, and choice of various operating systems.
Well it's Tuesday again, and you know what that means.. IBM announcements! Today, IBM announces that next Monday marks the 60th anniversary of first commercial digital tape storage system! I am on the East coast this week visiting clients, but plan to be back in Tucson in time for the cake and fireworks next Monday.
1925 - masking tape (which 3M sold under its newly announced Scotch® brand)
1930 - clear cellulose-based tape (today, when people say Scotch tape, they usually are referring to the cellulose version)
1935 - Allgemeine Elektrizitatsgesellschaft (AEG) presents Magnetophon K1, audio recording on analog tape
1942 - Duct tape
1947 - Bing Crosby adopts audio recording for his radio program. This eliminated him doing the same program live twice per day, perhaps the first example of using technology for "deduplication".
According to the IBM Archives the [IBM 726 tape drive was formally announced May 21, 1952]. It was the size of a refrigerator, and the tape reel was the size of a large pizza. The next time you pull a frozen pizza from your fridge, you can remember this month's celebration!
When I first joined IBM in 1986, there were three kinds of IBM tape. The round reel called 3420, and the square cartridge called 3480, and the tubes that contained a wide swath of tape stored in honeycomb shelves called the [IBM 3850 Mass Storage System].
My first job at IBM was to work on DFHSM, which was specifically started in 1977 to manage the IBM 3850, and later renamed to the DFSMShsm component of the DFSMS element of the z/OS operating system. This software was instrumental in keeping disk and tape at high 80-95 percent utilization rates on mainframe servers.
While visiting a client in Detroit, the client loved their StorageTek tape automation silo, but didn't care for the StorageTek drives inside were incompatible with IBM formats. They wanted to put IBM drives into the StorageTek silos. I agreed it was a good idea, and brought this back to the attention of development. In a contentious meeting with management and engineers, I presented this feedback from the client.
Everyone in the room said IBM couldn't do that. I asked "Why not?" The software engineers I spoke to already said they could support it. With StorageTek at the brink of Chapter 11 bankruptcy, I argued that IBM drives in their tape automation would ease the transition of our mainframe customers to an all-IBM environment.
Was the reason related to business/legal concerns, or was their a hardware issue? It turned out to be a little of both. On the business side, IBM had to agree to work with StorageTek on service and support to its mutual clients in mixed environments. On the technical side, the drive had to be tilted 12 degrees to line up with the robotic hand. A few years later, the IBM silo-compatible 3592 drive was commercially available.
Rather than put StorageTek completely out of business, it had the opposite effect. Now that IBM drives can be put in StorageTek libraries, everyone wanted one, basically bringing StorageTek back to life. This forced IBM to offer its own tape automation libraries.
In 1993, I filed my first patent. It was for the RECYCLE function in DFHSM to consolidate valid data from partial tapes to fresh new tapes. Before my patent, the RECYCLE function selected tapes alphabetically, by volume serial (VOLSER). My patent evaluated all tapes based on how full they were, and sorted them least-full to most-full, to maximize the return of cartridges.
Different tape cartridges can hold different amounts of data, especially with different formats on the same media type, with or without compression, so calculating the percentage full turned out to be a tricky algorithm that continues to be used in mainframe environments today.
The patent was popular for cross-licensing, and IBM has since filed additional patents for this invention in other countries to further increase its license revenue for intellectual property.
In 1997, IBM launched the IBM 3494 Virtual Tape Server (VTS), the first virtual tape storage device, blending disk and tape to optimal effect. This was based off the IBM 3850 Mass Storage Systems, which was the first virtual disk system, that used 3380 disk and tape to emulate the older 3350 disk systems.
In the VTS, tape volume images would be emulated as files on a disk system, then later moved to physical tape. We would call the disk the "Tape Volume Cache", and use caching algorithms to decide how long to keep data in cache, versus destage to tape. However, there were only a few tape drives, and sometimes when the VTS was busy, there were no tape drives available to destage the older images, and the cache would fill up.
I had already solved this problem in DFHSM, with a function called pre-migration. The idea was to pre-emptively copy data to tape, but leave it also on disk, so that when it needed to be destaged, all we had to do was delete the disk copy and activate the tape copy. We patented using this idea for the VTS, and it is still used in the successor models of IBM Sysem Storage TS7740 virtual tape libraries today.
Today, tape continues to be the least expensive storage medium, about 15 to 25 times less expensive, dollar-per-GB, than disk technologies. A dollar of today's LTO-5 tape can hold 22 days worth of MP3 music at 192 Kbps recording. A full TS1140 tape cartridge can hold 2 million copies of the book "War and Peace".
(If you have not read the book, Woody Allen took a speed reading course and read the entire novel in just 20 minutes. He summed up the novel in three words: "It involves Russia." By comparison, in the same 20 minutes, at 650MB/sec, the TS1140 drive can read this novel over and over 390,000 times.)
If you have your own "war stories" about tape, I would love to hear them, please consider posting a comment below.
Ten years ago, I travelled to New York City with my colleague, Randy Fleenor, to present the latest in IBM tape technology for the 50th Anniversary. On Thursday evening that week, the latest movie in the Star Wars saga, Episode II: Attack of the Clones was just released, and it was being shown using the new Digital Light Projection (DLP) technology just around the corner at the Ziegfeld theater! This movie was the first live-action film to be filmed entirely digital. George Lucas saw that digital video was the future, and started the process moving forward with this film.
I convinced Randy to join me, and we arrived at 11:10pm, the movie was scheduled to start at 11pm, so we figured we had only missed a few previews. We walked into a completely empty lobby. I asked for two tickets for the 11pm show at the ticket counter, and was told it was all sold out, and there was a huge line around the building for all the people waiting to see the 1:00am show, and that we might get in to see the 3:00am show.
Randy and I had meetings on Friday morning, so we were not going to wait in line all night to see a 3am show! Just then, a young man comes out of the theater. He said his girlfriend can't make it, and wanted a refund for his two tickets. I pulled out a twenty-dollar bill, offered to buy them directly at face value, and the theater employees approved the transaction. The seats were front row of the balcony section. By then we had missed all the previews and a short bit of the movie, but that was alright with us.
(FTC Disclosure: I am both an employee and stockholder in IBM. The U.S. Federal Trade Commission may consider this a paid, celebrity endorsement of LTO-5 tapes and the LTFS technology. References to other companies are for illustrative purposes and do not represent an endorsement of their products or services.)
Digital recording is ideal for all types of video, including movies, television, and commercial advertisements.
The latest excitement is over IBM's Linear Tape File System™ (LTFS), which IBM donated to the IT industry as open source so that everyone in the world can benefit. This allows tape cartridges to be treated like USB memory sticks, the ultimate in portability of data. It is supported for Windows, Mac OS, and Linux, and already well embraced by the Media-and-Entertainment (M&E) industry.
"The move to IBM technology has helped the network shrink its archive from 1,507 to just 388 square feet, representing dramatic systems and energy-cost savings."
"AlphaTV has been broadcasting since 1996, creating and storing all forms of video entertainment, from soap operas and documentaries, to movies and sporting events, and creating a vast video archive along the way. Initially, AlphaTV archived its programming on Sony Beta SP format video cassettes that stored up to 90 minutes of content. Not long after, in need of storage that offered greater density, it turned to DVCPRO format videos that stored up to 120 minutes. But even that format was not allowing the network to keep pace with its ballooning archive, a storage infrastructure that by 2011 spanned more than 1,507 square feet."
"'A Greek TV series stored on 100 DVCPRO tapes took up four shelves in our library, whereas on LTO-5 cartridge now takes up the space of a deck of playing cards,' Constantinos Colombus, chief technology officer at AlphaTV, said in a statement."
"IBM LTFS, an intuitive and graphical file system that provides direct access to data on LTO 5 drives, has enabled AlphaTV to manage, move and share video files much like they can with disk-management systems, by simply dragging and dropping. As a result, file management is easier to do and far more efficient, said Colombus."
To prepare for this anniversary, I spoke with Brad Johns, of [Brad Johns Consulting]. Brad was head of IBM tape marketing for a while, and ran tape customer councils to gather feedback from our largest customers. Brad was my mentor in marketing at IBM from 2003-2007 and has since retired from IBM to start his own consulting practice.
The comparison was made between Crossroad Systems' Strongbox® with Enterprise tape library, LTO-5 tapes using LTFS, versus a unified disk storage system offering NAS protocols on high-capacity 3TB drives. The findings: the tape-based archive had nearly 80 percent lower TCO than the disk-based solution!
You don't have to be in the middle of the Greek economy to real that is a good value!
This week, Allyson Klein, Director of Technical Leadership Marketing from Intel, interviewed me for the Intel® [Chip Chat podcast] to promote the upcoming [IBM Edge conference] to be held June 4-8 in Orlando, Florida. Intel is a big sponsor of the conference. The podcast is only about 8 minutes long. Enjoy!
Hi everyone! It's Sunday, and I have arrived safely to Orlando, Florida. It actually took me 25 hours to get here, due to mechanical problems on the plane, and an unexpected overnight stay in Chicago. My checked bags unfortunately got misplaced in Chicago, and will hopefully arrive later today.
In past years, IBM ran three separate storage events. One for IT executives, one for technical storage administrators, and one for IBM Business Partners. This year, we have combined all three into one event: IBM Edge. There are three distinct venues: Executive Edge is for the CIOs and IT Directors, Technical Edge for the storage administrators, and Winning Edge is for the IBM Business Partners.
I will be spending most of my time at the Technical Edge events. This year, I was on the review board, and spent much of the last three weeks reviewing a good portion of the 249 presentation topics that will be given this week.
If you have never been to IBM storage events in the past, or it has been awhile since your last one, you can review my blog posts from prior years to get familiar. I have them collected here in my January post [Mark your Calendars - Upcoming Events].
Here is my tentative plan for the week, in case you want to find me. The table is color-coded. White for sessions I am merely attending, and yellow for those sessions that I am presenting or participating as part of a panel.
Opening General Session
Bonnet Creek Ballroom
Technical Edge Main Tent
Waldorf Astoria Ballroom
Understanding Your Options for Storing Archive Data to Meet Compliance Challenges
IBM TotalStorage Productivity Center: New Features and Functions
Hamilton & Indian
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy!
Reception and Concert
IBM Building Blocks for Technical Computing
IBM Tivoli Storage Manager as a Cloud Backup Service
IBM SMB Solutions for Cloud
Introducing the IBM SmartCloud Virtual Storage Center
Using Social Media for IBM System Storage Birds of a Feather
Data Footprint Reduction: Understanding IBM Storage Efficiency Options
IBM Active Cloud Engine Implementation on IBM SONAS 1.3 and IBM Storwize V7000 Unified
Introducing VMware vSphere Storage Features
Hamilton & Indian
IBM's Storage Strategy in the Smarter Computing Era
Bonnet Creek Salon
IBM SONAS and the IBM Cloud Storage Taxonomy
Dinner and Concert
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy!
Bonnet Creek Salon
IBM Tivoli Storage Productivity Center Overview and Update
Bonnet Creek Salon
Encryption and Key Management in the Cloud: The Top 6 Concerns to Ensure a Secure and Reliable Solution
IBM SmartCloud Enterprise -- Object Storage
Hamilton & Indian
Smarter Storage for Smarter Computing
Storage "Free-for-All" moderated by Scott Drummond
How Real-Time Compression Can Maximize Storage Efficiency for Production Applications
Hamilton & Indian
NAS File Systems: Access and Authentication
It's going to be a fun and busy week! I will be tweeting throughout the week. You can follow me on Twitter at [@az990tony]. You can also follow tweets marked #IBMstorage and #IBMedge from others.
This week, I am in Orlando, Florida presenting, blogging and tweeting at the IBM Edge conference. The first day began with opening main tent sessions. Deon Newman, IBM VP of Marketing, was the emcee. The four-person [Bella Electric Strings] rocked the house with some electric violins.
Game Change on a Smarter Planet: A New Era in IT
Rod Adkins, IBM Senior VP for the Systems and Technology Group, presented IBM's Smarter Computing strategy. For those not familiar with this, a little context might help.
Back in 2008, IBM launched its corporate-wide strategy called "Smarter Planet", which focused on solving the world's biggest problems through the effective use of Information Technology. To get there, everything needs to be instrumented to monitor and gather information, interconnected with centralized processing, and analyzed through intelligent algorithms.
Over the past few years, this general approach has been made more specific to tackle problems in particular industries. Detailed approaches like Smarter Cities, Smarter Energy, Smarter Education, Smarter Retail, Smarter Water and Smarter Food, are a few examples of this.
As IBM pursued solutions in each of these areas, clients realized they needed some guidance on the underlying IT infrastructure needed to deploy these solutions. Last year, IBM launched the Smarter Computing, which I [explained in great detail in my blog post last March].
Designed for the Data - to be fair, IBM systems have always been designed for the data. When the System/360 first came out, the bulk of data was stored in structured databases, so systems were designed for this. Today, over 80 percent of data is unstructured, not in a database, so the design and approach for systems today must reflect that new reality. For example, Big Data analytics is often used against spreadsheets, documents, social media feeds, and other unstructured sources.
Workload-Optimized Systems - There are two ways to have a workload-optimized system. The first is to start with general purpose components and tune them, and the second is to integrate expertise into the design.
Managed with Cloud technologies - Cloud computing has introduced new levels of standardization, automation and virtualization.
Rod wrapped up his session discussing the IBM PureSystems family of expert-integrated systems that IBM announced in April. This includes the PureFlex infrastructure system and the PureApplication platform system.
A New Approach to Storage
Brian Truskowski, IBM General Manager for System Storage and Networking, presented IBM's new approach to storage to support Smarter Computing environments.
Efficient by Design - Storage needs to be designed for the data, to store it efficiently, and be able to scale in the expected growth, driven by trends such as Big Data analytics.
Self-Optimizing - Storage needs to be self-optimizing for their particular application workloads, to avoid manual performance tuning efforts. Policies to handle Qualities of Service help optimize performance and costs based on business requirements.
Cloud Agile - Storage needs to be part of a virtualized environment, managed by Cloud technologies. This includes working seemlessly in environments with server hypervisors, storage hypervisors, virtual LANs, SANs and tape libraries.
With this new approach, clients will be able to increase competitiveness, while reducing both capital and operational expenses.
Yoni Cohen is the founder and CEO of Snowball Studios. They started with five artists, and grew to 60 people in a few years to take on bigger projects. They produce digital animation for television shows and commercials.
Despite their small size, they have a dedicated "IT" department. In addition to developing in-house tools for the artists to produce animation, they also were tasked to find the best storage solutions. Files storing 3D video can be quite large. After exhausting research into all the storage options, they chose IBM, and complemented this with the Real-Time Compression appliance for their NAS environments.
The results were stunning. A project that took 417GB before took only 148GB. a 64 percent data footprint reduction! He found he got this 3x reduction across his environment.
University of Rochester Medical Center (URMC)
University of Rochester is in New York state, about 60 miles east of Buffalo, and 90 miles from Toronto across Lake Ontario. Six years ago, Rick Haverty joined URMC as the Director of Infrastructure services, managing 130 of the 300 IT personnel at the Medical Center. I met Rick last year, when he presented at the [IBM Storage Innovation Executive Summit] in New York City. Last December, I co-presented with Rick on a session for SONAS at the [Data Center Conference].
URMC has DS8000, DS5000, XIV, SONAS, Storwize V7000 and is in the process of deploying Storwize V7000 Unified. He presented how he has used these for his Vendor Neutral Archive (VNA). For Rick, the IT Infrastructure has become the new "dial tone", everyone expects it to work 100 percent of the time.
For those not familiar with VNA, Rick has 36 different departments, and each was storing archives of their medical images in separate silos of storage. Using software from [Acuo Technologies], he was able to have all 36 different PACS systems store data onto a single storage repository. The side benefit is that all medical images are now readily available to the Electronic Medical Records (EMR) system.
Main Tent for Technical Edge
After the opening session, the folks in Technical Edge moved to a different room for the main tent session. Mike Kuhn, IBM VP of Systems Lab Services, was the emcee. There were three guest speakers:
Clod Barrera, IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage, presented on storage trends and directions, and how this will influence workload-optimized systems, Cloud computing, Easy Tier, and Active Cloud Engine.
Jeff Jonas, IBM Fellow and Chief Scientist for IBM Entity Analytics, presented "Fantasy Analytics" which explained his work in the Business Analytics. He used "jigsaw puzzles" as an analogy to help explain for the type of work he is researching.
Dan McMillan, Chief Comedy Officer of his own company, was formerly an engineer, but now stand-up comedian. He poked fun at the IT industry, how things have changed since he was an engineer, and his ideal "Universal Business Translator".
I presented IBM's Smart Archive strategy and the storage products IBM offers to archive data and meet compliance regulations:
The differences between backup and archive, including a few of my own personal horror stories helping companies who had foolishly thought that keeping backup copies for years would adequately serve as their archive strategy
The differences between Write-Once Read-Many (WORM) media, and Non-Erasable, Non-Rewriteable (NENR) storage options.
How disk-only archive solutions become "space heaters" for your data center.
An overview of the various storage hardware options from IBM.
An explanation of the different IBM software offerings to help complement the storage hardware choices.
IBM TotalStorage Productivity Center (TPC): New Features and Functions
Mike Griese, IBM program manager for TPC, presented the latest in TPC 5.1 version announced this week. His session was organized into four key sections:
Insights - TPC 5.1 integrates COGNOS reporting, which allows custonmization of reports and ad-hoc exploration and analysis. Since the reports are not binary-compiled into the product, IBM can ship new COGNOS reports as templates outside the normal TPC release schedule. Also, TPC 5.1 got smarter on reporting on server virtualization hypervisor environments to avoid double-counting.
Recommendations - TPC 5.1 can analyze your usage patterns across the entire data center and make recommendations to move data from one storage tier to another. You can then act on these recommendations by moving data from one tier to another, either "up-tier" to faster storage, or "down-tier" to less expensive storage, using a storage hypervisor like IBM SAN Volume Controller. This is complementary to features like Easy Tier which optimize within a single disk system.
Performance - TPC 5.1 uses a new web-based GUI, based on AJAX, HTML5 and Dojo widgets, inspired by the IBM XIV GUI, and similar to the web-based GUI of SAN Volume Controller, Storwize V7000 and SONAS.
Mike also explained the new TPC 5.1 packaging. Instead of having a variety of components like "TPC for Disk", "TPC for Data", and "TPC for Replication", the new packaging simplifies this down to two levels of functionality. The basic level supports block-level devices, including disk performance, replication and SAN fabric management. The advanced level adds support for files and databases, including support for Cloud management such as SONAS environments.
Dan Zehnpfennig, Solution Architect, talked about his experiences installing TPC 5.1 and how this was much improved over previous TPC versions.
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy!
Well it's Tuesday again, and you know what that means... IBM announcements! Yesterday, at the IBM Edge conference here in Orlando, Florida, IBM announced its new apporach to storage, and a whole bunch of storage products, enhancements, and services. I will focus on some key ones here, and save the rest for next week.
IBM SAN Volume Controller (SVC) v6.4
The SVC is IBM's enterprise-class storage hypervisor. The latest software release, v6.4, can be installed on any SVC hardware, from the 2145-8F2 introduced back in 2005, to newer models like the 2145-CG8. Here are the key features:
Fibre Channel over Ethernet (FCoE) -- This is complete end-to-end support. For SVC units with 10GbE ports, these ports can be now be used for FCoE. This allows hosts to attach to SVC via FCoE, allows SVC node-to-node communication for clustering, and allows SVC to communicate to back-end devices via FCoE.
Real-Time Compression -- IBM ported over the patent Random Access Compression Engine (RACE) from the Real-Time Compression Appliances to SVC v6.4. This allows primary data, accessed via block-based protocols, to be compressed up to 80 percent. This feature is an extra priced feature by TB.
Non-Disruptive Volume move between I/O Groups -- If you don't already have SVC, you don't need to worry about this. For existing SVC customers, this allows volumes to be associated with two or more I/O groups, and that you can add or remove I/O groups non-disruptively. For example, if you want to move a volume from IOG1 to IOG2, then you add IOG2 to the list of I/O groups for the volume, let the multi-pathing software discover the additional paths, the remove IOG1, which then marks the previous IOG1 paths inactive. All this can be done while applications read and write data.
Dedicate FCP ports for Replication -- If you activate the two 10GbE Ethernet ports for FCoE, you can free up two FCP ports that you can dedicate for long-distance Metro Mirror or Global Mirror.
If you have SVC today, but are running an old release like v4.3 or v5.1, I recommennd you upgrade up to at least v6.2.05 release now. This release has been out for a year and is very stable, and serves as a great platform for a later upgrade to SVC v6.4.
IBM Storwize V7000 v6.4
The Storwize V7000 is IBM's midrange storage hypervisor. The latest software release, v6.4, can be installed on existing block-only Storwize V7000 units in the field. The Storwize V7000 v6.4 gets all the features listed above, as well as the following:
Four-way clustering -- Previously, you could cluster two Storwize V7000 controller enclosures together (4 canisters total). To cluster three or four controllers required an RPQ. Now, IBM supports up to four Storwize V7000 controller enclosures (8 canisters) without an RPQ.
Direct Fibre Channel attach -- A lot of people are using Storwize V7000 inside single-rack configurations, so it makes sense not to require a SAN switch for just a few Windows, Linux or VMware servers. An RPQ is now available to allow this to happen.
IBM Tivoli Storage Productivity Center (TPC) v5.1
TPC is already ranked one of the best Storage Infrastructure Management software in the market, and this release will just solidify its lead. Key features include:
Upward integration to higher level management systems
A new, intuitive, easy-to-use web-based GUI inspired by the XIV GUI
Integration of COGNOS to be able to generate and customize reports
Support for SONAS systems
There are several presentations on TPC this week that will go into more detail. Check out the [TPC Facebook page].
My latest book Inside System Storage: Volume IV is now available!
Yes, can you believe it? I have published my fourth volume in my "Inside System Storage" series! It is available in three formats:
Hardcover with dust jacket
eBook (Adobe Acrobat PDF)
You can order this, and all my other books, in all formats, directly from my [Author Spotlight] page. The paperback will also be available soon from other online booksellers, search for ISBN 978-1-105-72213-4.
IBM DS3500 Express
The DS3500 is our entry-level block-based device, designed specifically for random I/O workloads. This includes databases, email repositories, traditional business applications, and on-line transactional workloads. Here are the new features:
Dynamic Disk Pooling, similar to what XIV does to reduce disk rebuild times, but using a RAID-6 like approach per chunk of data.
Thin Provisioning using Dynamic Disk Pooling
Asynchronous Logical Unit Access (ALUA) failover
Enhanced FlashCopy, improved scalability, consistency groups and rollback support
VMware API for Array Integration (VAAI) support. This includes Write Same, Extended Copy, and Atomic Test & Set.
The DS3500 replaces the previous models of DS3200, DS3300 and DS3400 models.
The DCS3700 is our entry-level/midrange block-based device, replacing the DCS9900 model, designed specifically for sequential I/O workloads. This includes Big Data analytics, Hadoop, High Performance Computing (HPC), video surveillance, and television broadcasting. It holds 60 drives in a 4U controller enclosure.
This week I am in Orlando, Florida for the IBM Edge conference. Tuesday afternoon we had a Birds-of-a-Feather (BOF) session to discuss social media. I was the moderator. We had two independent bloggers on the panel: [Jon Toigo] and [Steve Foskett]. We had several IBM social media experts, including Jack Arnold, Scott Drummond, Mary Hall, Nick Harris, and Rich Swain. Also joining us was Alex Hollingworth, social media expert from Emulex.
At the opening session, Deon Newman suggest we re-tweet him, isn't that plagiarism? What is your take on this?
The important thing is to give credit where it is due. Avoid screen scraping others and passing it off as your own. When you re-tweet someone, you give them credit for their original tweet. You are basically saying, "I could not have said it better myself!" With blogs, you can do the same by linking to other blog posts.
I am active in social media, but am having trouble getting the older colleagues in the IT department to participate. I want them to write down all the knowledge in their heads.
The best way to get employees to do anything new or different is to show them how it benefits them. For example, if the elders are tired of answering the same questions over and over, have them start an internal wiki, blog or knowledgebase to capture the answers to frequent questions. This will save them time, so they can see value for themselves. I suggest looking at IBM Lotus Connections which provides collaboration tools inside your firewall, accessible only to internal employees of the company.
How do we differentiate facts from opinions in our social media writings?
You can always be explicit, for example IMHO stands for "In my humble opinion". I find that blogs are 99 percent opinion, and 1 percent fact, so it is easier to point out the facts linking or citing sources, and let the rest of your writing be considered opinion.
I would like to find people on Linkedin to establish business relationships with the storage administrators, decision makers and influencers within the companies I want to sell to, how do I best do that?
Nobody likes cold calls. If you upgrade to a "Pro" account on LinkedIn, you can send 15 to 25 "Inmail" emails through their system to introduce yourself. Otherwise, consider finding someone in your network that knows them, and arrange for them to provide the mutual introduction for you.
How do I find people to follow related to the topics I am interested in, like storage?
There are tools like [Tweetadder] to help you find people to follow. Or, just search on certain hashtags, and add people you find that use them.
I am concerned about privacy? What can I do to protect my privacy?
Decide up front which topics are off-limits in your blog or other social media. For services like Facebook, check your privacy settings every 30 days. Several people have opted to create a special "Facebook Page" that represents their professional brand, so that the rest of Facebook can be used for friends and family.
I want to start a new blog, which service should I use?
Services like Blogger, Blogspt and TypePad are generally easy to set up. Wordpress is more advanced, but can be more complicated to set up.
I don't care for writing a blog, how can I set up a video blog, or vlog?
Consider creating a channel on YouTube. Another popular site is Vimeo. A "Pro" account of Vimeo provides added features.
I am new to Twitter, what tools should I look into?
I suggest you look at HootSuite. This lets you post to Twitter, Facebook and Linkedin. You can schedule when a tweet will be posted, so you can right them in advance and schedule them for a certain date and time. Also, if you have a blog, you can have Hootsuite send out tweets automatically with the titles and link to each blog post.
How much effort should we put in to Social Media?
As much or as little as you want. Don't force yourself to spend more time than you want. Typically, people spend 1-2 hours per day. Cut down how much you spend watching television to make up the difference. Set up "Google Alerts" that can send you emails when certain phrases appear anywhere. There are also social bookmarking tools like Instapaper, Delicious or Diigo that can save bookmarks in the cloud for things that you want to read, but don't have time to read now.
Which social media would be the best to get chicks.
Writing a technical blog with good quality content. Girls want to be with you. Guys want to be you.
How can I use social media to provide feedback about specific products?
IBM now has a [Reviews and Ratings] for its IBM System Storage products. Consider writing a review today!
Thanks to all of the panel for their help with this!
Earlier this year, I wrote a Web article titled [Data Footprint Reduction] which covered data deduplication and compression, and was asked to present this at IBM Edge. I have expanded it to include:
Space-Efficient Point-in-Time copies
After I presented the basic concepts, Sanjay Bhikot, a Unix and Storage admin at RICOH, presented his real-world experiences with data deduplication using the IBM ProtecTIER and real-time compression Beta experience using the SAN Volume Controller (SVC).
IBM Active Cloud Engine Implementation on IBM SONAS 1.3 and IBM Storwize V7000 Unified
John Sing (IBM) presented the latest enhancements in the v1.3.2 release of SONAS and Storwize V7000 Unified.
Introducing VMware vSphere Storage Features
Fellow blogger Stephen Foskett presented this session on VMware's storage features. This included VMware APIs for Array Integration (VAAI), VMware Array Storage Awareness (VASA), vCenter plug-ins, and a new concept he called "vVol" which de-multiplexes the "I/O Blender" that server hypervisors do by tagging individual requests to individual OS guests to provide added benefit. IBM is a leading reseller of VMware, so it makes sense that most of our storage meets all of Steve's requirements for recommendation.
IBM's Storage Strategy in the Smarter Computing Era
Last year, I presented this on the fourth day of the conference, and feedback we received from attendees was that this should have been presented sooner in the week, as it provides great context for the more detailed product presentations.
To address this concern, the IBM executives presented IBM strategy on Monday's keynote session, but allowed me to present this on Wednesday for several reasons:
You may have missed the keynote session. For example, you may not have arrived in time to hear the executives speak due to weather or mechanical problems causing travel delays.
You may have attended the keynote session, but want to hear it again. Maybe you were a bit hung-over, or just may have been overwhelmed with the size and scope of this event. I have read for strategic topics, audiences may have to hear the message five to seven times before they truly appreciate and understand it.
You may want to ask questions, and explore the implications in more detail. While keynote sessions can reach a broader audience, the communication is very much uni-directional. With break-out sessions with a few hundred people, the venue is more intimate and can afford opportunties for information exchange.
The title of this session rolls off the tongue nicely, much like "James and the Giant Peach", "Harold and the Purple Crayon", or "Charlie and the Chocolate Factory".
When people say they are interested in "Cloud Storage", what exactly do they mean. After discussions with hundreds of clients, IBM has worked out a "taxonomy" that identifies four distinct types of storage:
In this session, I presented how IBM SONAS addresses all four of these categories, as well as other IBM storage products that can address specific categories in the taxonomy.
In the evening, the attendees at IBM Edge joined the attendees from Innovate2012 (focused on IBM Rational products) at SeaWorld, with BBQ dinner, rides, Shamu the whale show, and a concert featuring Foreigner!
With my colleague, Mike Griese, presenting TPC 5.1 and the IBM SmartCloud Virtual Storage Center earlier this week, you might wonder what is left to say. Mike's session was intended more for clients who already have TPC deployed, but my session is more of an introductory session.
I was the original architect of the product back in 2000-2003, so have some insight into the history, motivations and design principles applied to each version of the product. It has evolved nicely over the years, and while I am no longer working full-time on the product, I am still very much involved, and am consulted by the current architects and product managers for direction and opinion going forward.
I presented an overview of the overall product as it stands today in its current v4.2.2 version, and gave a few highlights of what to expect in the upcoming TPC 5.1 announced this week.
Encryption and Key Management in the Cloud: The Top 6 Concerns to Ensure a Secure and Reliable Solution
This was a split session with two speakers. The first speaker was Richard Moulds, VP of Strategy and Marketing from Thales, and the second speaker was Gordon Arnold, IBM Senior Technical Staff Member (STSM) and Software Architect for Tivoli Security Management.
Richard presented security issues in the cloud. He is an author of several books, including "Key Management for Dummies" and "Data Protection and PCI Compliance for Dummies". Thales is a large French companay of 70,000 people nobody in the USA has heard of, but is a major company in the area of IT Security. He presented survey results about people's perceptions and attitudes towards encryption and security issues in the cloud.
The security threats in the Cloud were presented as the "Seven Deadly Sins":
Data loss and leakage, including data that is not deleted with resources are re-used for other purposes
Shared technologies, especially in Cloud environments that do not have robust multi-tenancy
Malicious insiders, such as administrators being bribed to provide access to sensitive data
Account or service hijacking, including those that pretend to be someone else, asking for password resets
Insecure APIs for applications and services, many of these APIs were developed quickly, recently, and perhaps without the robust review from a security perspective
Abuse of the Cloud, such as using the Cloud itself to crack passwords or break decryption passwords through parallel processing
Unknown risk profile, as few Cloud providers have certified security capabilities
Gordon Arnold (IBM) presented IBM's Encryption and Key management. IBM has two products: IBM Tiovli Key Lifecycle Manager (TKLM) and IBM Security Key Lifecycle Manager (SKLM). These are KMIP v1.0 compliant today. The OASIS group is currently reviewing KMIP v1.1 enhancements that includes some suggestions from IBM.
IBM's use of Key Encrypting Keys on disk and tape has proven to be quite useful. The only copy of the encryption key is on the media, and is then encrypted by an authorization key. If you need to defensibly delete the data for compliance reasons, you can simply destroy the encrption key.
At lunch, I spoke with Scott Laningham who was doing video interviews. For years, Scott was the #1 blogger on IBM developerWorks until I took over the title last year. We discussed working on a video in the future on this.
This week I am in Orlando, Florida for the IBM Edge conference. Here is a recap of Day 4 afternoon sessions which related to Cloud computing.
IBM SmartCloud Enterprise -- Object Storage
George Contino, IBM GTS Consultant for Cloud Storage Service Enablement, presented IBM's latest Object Storage offering, based on an alliance IBM formed with Nirvanix last October 2011, launched January 31, 2012. It is part of the IBM SmartCloud Enterprise system.
IBM currently has two datacenters for this now, Secaucus NJ and Frankfurt Germany, but will have five by end of 2012, and hopefully seven datacenters by nid-year 2013.
The storage is then divided in several layers:
Customer master account, assigned a 128-bit encryption key
Name spaces by department or LOB
User file objects
The objects are given random names, with the real customer-assigned file names stored elsewhere, to provide additional privacy through obfuscation. For added security, it uses Two-Factor Authentication, requiring the users to provide both the 128-bit encryption key and the password.
There are three ways to access data:
Proprietary API - An API is available on Windows and Linux. Symantec NetBackup, BackupExec and Commvault Simpana have already coded to the Nirvanix API to allow backups to be stored in the Nirvanix storage cloud. IBM InfoSphere Optim can archive data to the Nirvanix storage cloud.
CloudNAS - Nirvanix provides software that provides CIFS and NFS interfaces, that converts to the Nivranix API. IBM Tivoli Storage Manager can send backups and archives to the Nirvanix storage cloud using this approach.
Cloud Storage Gateway - Third parties have developed hardware that runs the CloudNAS software, or directly codes to the API, to provide standard interfaces to the local clients, and provides access to the Nirvanix storage cloud. Two examples were Panzura File System Controller and Twinstrata Cloud Array Gateway.
One of Nirvanix's partners is OxygenCloud, which allows mobile/laptop access to work files. This includes security checks on Active Directory or LDAP, AES-256 bit encryption and HTTPS protocol support. For example, if you had to give a bunch of PDF files to your clients outside your company, you could create a folder, and send out a URL link to the clients, and this link would be valid for the next 14 days for them to download the files.
How University of Wisconsin-Milwaukee (UWM) moved SAP to the Cloud
Maik Gasterstaedt, IBM Technical Enablement for SAP, Storage and Cloud solutions, presented this session on the deployment of an SAP cloud at UWM. Worldwide, SAP has established five University Competency Centers (UCC) to provide SAP cloud services to other universities, and UWM is one of these five UCC.
Basically, the UWM manages SAP instances that are then "rented out" to 107 other universities. An SAP instance represents a "sample company" that could be used in a course curriculum, for example, "Global Bikes, Inc.", "Fitter Snacker", or IDES. An SAP Client represents a fresh copy of the data for this sample company.
UWM charges each University per "SAP client" per semester. Suppose a professor will teach three classes on SAP. He can arrange the SAP clients depending on how much he is willing to spend.
Get one SAP Client to be shared across all three classes. All three classes would be using the same sample company.
Get an SAP Client for each class. Each class could be based on the same or different sample companies.
Get one or more SAP Clients for each class. In this case, for example, a class could get two or more sample companies.
The problem was that they were running on Sun servers approaching end-of-life. They decided to switch to IBM, running 43 SAP Instances on AIX with two Power750 servers, 7 SAP instances on Windows guests of VMware across two BladeCenter chassis using HS22 blades, XIV storage, backed up by Tivoli Storage Manager and Tivoli Storage FlashCopy Manager. They can run 50 SAP clients on each SAP instance. Each client could be rented out to different professors at different universities.
They started installation April 1, and the entire system was running in production by August 15, less than five months end-to-end.
The results were stunning. SAP instance provisioning used to take 5 days, now takes 12 hours. Backups that used to take an hour complets in about 30 seconds.
The conference is almost over folks! Just a few sessions tomorrow and then it is all done.
This week I am in Orlando, Florida for the IBM Edge conference. Thursday evening after all the other sessions, we had a Free-for-All, a Q&A panel across all storage topics, moderated by Scott Drummond. The conference officially ends at noon tomorrow, but for many, this is the last session, as people fly out Friday morning. Here are the questions and the panel responses during the session.
When will IBM unify their storage management between Mainframe z/OS and the distributed systems platforms?
IBM offers a Change and Configuration Management Data Base (CCMDB) for this purpose with appropriate collectors from z/OS and distributed systems, but hasn't sold well.
When will IBM devices have RESTful interfaces?
Both IBM Systems Director and IBM Tivoli Storage Productivity Center (TPC) offer RESTful APIs. IBM Systems Director can manage z/VM and Linux on System z, as well as Power Systems and x86 based distributed systems. Since October 2008, IBM's Project Zero introduced RESTful interfaces to PHP and Groovy software running on WebSphere sMash environments. We have not heard much about this since 2008.
Will IBM TPC support NPIV on Power Systems?
TPC 5.1 has toleration support for this, showing the first port connection discovered, but not all connections, and we expect to retrofit this toleration to TPC 4.2.2 Fixpack 2. Hopefully, we will have full support in a future release.
We would like TPC for Replication to run on Linux for System z. We do not run z/OS at the disaster recovery site location.
Submit an IBM Request for Enhancement [RFE] for this. We have TPC for Replication on z/OS, as well as the distributed systems version that runs on Windows, Linux and AIX.
We have enhancements we would like to see for XIV and SONAS also, can we use the RFE process for this also?
Yes, submit the requirements for our review.
We heard the Statement of Direction that there would be storage integrated into the PureSystems. What exactly does that mean?
The PureSystems family of expert-integrated systems is based on a new chassis that has a front part, a midplane, and a back-part. All IBM System Storage products that support x86 and Power Systems can work with PureSystems. However, IBM does not yet offer storage that fits in the front part of the PureFlex chassis, but the Statement of Direction indicates that we intend to offer that option. Until then, the IBM Storwize V7000 is the storage of choice that can be put into the PureSystems rack, but outside the individual chasses.
We see some features like Real-Time Compression being put into the SAN Volume Controller (SVC), and other features put into the back-end devices. How are we supposed to make sense of this?
IBM's new pilot program, the SmartCloud Virtual Storage Center, to bring these all together. In general, we have design teams of system architects that determine which features go in which products, and prioritize accordingly.
We heard the IBM Executives during the opening session indicate that IBM's strategy involves supporting Big Data, but I haven't seen any storage that supports native Hadoop interfaces. Did I miss something?
First, I want to emphasize that Big Data is more than just MapReduce workloads. IBM offers Streams and BigInsights software to handle text, as well as Business Intelligence and Data Warehouse solutions for structured data. IBM's General Parallel File System (GPFS) has a Shared-Nothing-Cluster (SNC) mode with Hadoop interfaces that runs twice as fast as Hadoop's native HDFS file system. The storage products we recommend for Big Data are the SONAS and the DCS3700 disk systems, as both are optimized for the sequential workloads Big Data represents.
Everytime we upgrade our SVC, we review the list for SDDPCM multi-pathing and see that we need to upgrade our back-end DS8000 microcode up to recommended levels. Can we get a list of combinations that work from other customers?
The advantage of storage hypervisors like SVC is that we can separate the multi-pathing driver from the back-end managed disk systems. You only need the SDDPCM to support the SVC, not the back-end devices. For the most part, SVC has not dropped support for any level of previously supported OS or multi-pathing software.
On SVC, when we migrate volumes (vDisks) from one storage pool to another, we would like to throttle this process during FlashCopy.
Yes, we had several requests like this, which is why we now recommend using Volume Mirorring to perform migrations. In fact the GUI wizard uses Volume Mirroring by default when migrations are performed. As for throttling, IBM has implemented "I/O Priority Manager" that offers Quality of Service classes for DS8000 and XIV Gen3, and might consider porting this to other products in our portfolio.
Sizing systems is an art. I just need to know if the DS8000 is running hot. Can we have the equivalent of "red lines" for our disk systems similar to automobile engines?
Storage Optimizer was added to TPC 4.2 to help in this area, identifying heat-maps for IBM DS8000, DS6000, DS5000, DS4000, SVC and Storwize V7000. We recommend you look at the performance violation reports.
How can we evaluate the characteristics of our workloads?
Yes, TPC can do this.
When we are replacing non-IBM storage with IBM, we don't have good tools to evaluate the non-IBM equipment. What is IBM doing for this?
IBM's Disk Magic modeling tool can take inputs from a variety of sources, including iostat from the servers themselves. You can also install a 90-day trial of TPC to help with this.
We really like EMC's "Grab" program, does IBM have one also?
Updating the Host Attachment Kit (HAK) for AIX is quite painful for the SVC. We prefer the method employed for the XIV.
Thanks for the feedback.
For SVC, we need to correlate disk with VMware and VIOS. Can we get vSCSI information on VIOS?
TPC 5.1 has this support, and we believe it has been retrofitted to TPC 4.2.2 Fixpack 2, coming out this month.
Currently, with SVC, when volumes are part of a Global Mirror (GM) session, we need to cancel GM, expand the source volume, expand the target volume, then restart GM. We would like this to be fully automated and non-disruptive.
Sounds like a great requirement to submit for the RFE process.
Can we get an RSS Feed for the RFE community.
Yes, you can subscribe to it. You can also set up "Watch Lists".
Thanks to all of the IBM experts on the panel for their participation at this event!
This week I am in Orlando, Florida for the IBM Edge conference. This is the last day, so it ends early for people who want to get home to their datacenters (er.. families) for the weekend.
How Real-Time Compression Can Maximize Storage Efficiency for Production Applications
This was a split session with two speakers. First, Ian Rimmer, Senior IT Engineer and Architect at iBurst, presented their experience with the IBM Real-Time Compression Appliance in front of NetApp NAS storage arrays. Second, Jerry Haigh, IBM offering manager for IBM System Storage, presented the new Real-Time compression feature announced this week on IBM SAN Volume Controller (SVC) and Storwize V7000.
iBurst is the #1 Wireless Telecom for South Africa. The also offer cable broadband and VOIP. They have 200 employees servicing 120,000 subscriber/households. They need to keep five years' worth of text files, and have chosen real-time compression of their NAS storage. This was before IBM acquired the Storwize company, as they have been using it for the past six years.
The monetary savings from compression was used to purchase Performance Accelerator Modules (PAM) cards for their NetApp NAS gear, which benefit from the compression (more data stored in SSD to improve performance).
For backup, they use NDMP with Symantec NetBackup that keeps data in its compressed form as it is written to tape. They have an IBM TS3100 library with LTO tape as the backup repository.
Jerry Haigh presented Real-Time compression for primary disk data. Unlike the competition, this is designed to be used with primary data, including databases, and does this real-time, not post-process. In some performance tests, DB2 compressed on 48 drives out-performed the same data uncompressed on 96 drives. In another test focused on VMware Vmark benchmark, the compressed data was able to be same or better performance as uncompressed. In a third test with SVC virtualizing XIV running Oracle ORION test, the Oracle databases compressed 50 to 64 percent, and had better performance.
For those who already have SVC or Storwize V7000, consider a 45-day trial to check out compression for yourself.
NAS File Systems: Access and Authentication
Mark Taylor, IBM Technical Specialist for SONAS, N series and Storwize V7000 Unified, presented the nuances of authentication and authorization for NAS file systems. The differences between these two are:
Authentication - Yes, you are who you are.
Authorization - Yes, you are permitted to do what you are trying to do
(Prior to working with SONAS, my only experience with access and authentication in NAS was setting up my LAN at home, which I have connecting my Mac, Linux and Windows machines. I have both N series and SONAS at the IBM Executive Briefing Center in Tucson, Arizona, so I know first-hand how complicated NAS access and authentication systems can be.
A few months ago, I taught "Intro to NAS" as one of my topics at the Top Gun class in Argentina and Brazil. Several of the students had mentioned they thought they knew NAS solutions but had not realized all the technical issues with access and authentication that I discussed in my presentation.)
Mark explained the differences between Windows NTFS-style System identifiers (SID), versus UNIX-style user and group identifiers (UID, GID). For NAS solutions that support both CIFS and NFS, there are four options:
Microsoft Active Director (AD) extended with Identity Management for UNIX, formerly known as Services for UNIX (SFU). AD servers normally store SID information, but the extensions add extra columns to hold UID/GID mappings.
AD with Network Information Service (NIS) server. The problem with this approach is that AD and NIS are separate databases, and you need to coordinate updates to them, and their backups.
Lightweight Directory Access Protocol (LDAP) with SAMBA extensions. LDAP holds UID/GID information, and the SAMBA extensions adds extra columns to hold SID mapping.
Local mapping. The dangerous part of local mapping is that the storage admin is also the security admin, and you may want different people doing these roles.
Of these four methods, Mark recommends the first and third as best practices for multi-protocol authentication.
SID-to-UID mapping, UID-to-SID mapping
SONAS and Storwize V7000
SID-to-UID/GID mapping, NFS v4 ACLs
NFS v4 ACLs
Mark then explained how NFS v4 ACLs work, basically an ordered collection of "Access Control Elements" or ACEs. Each ACE on the ACL may "allow" or "deny" the request. You want to avoid "Inheritance" as that can cause problems and unxpected results.
That's it folks. Next week, I am spending time with my research buddies at the Almaden Research Center near San Jose, California, and then it is off to Moscow, Russia to kick off a series of IBM events called "Edge Comes to You" (ECTY).
The ECTY conferences will be a smaller subset of the Edge conference here in Orlando, but offered in other countries for those who were unable to travel to the United States.
Well, it's Tuesday again, and you know what that means... IBM announcements!
Last week, IBM had a big storage launch of various products, with the June 4 announcements at the IBM Edge 2012 conference. I provided highlights in my post [IBM Edge Announcements]. As promised, here are the rest of the announcements.
SONAS v1.3.2 adds support for management by the newly announced IBM Tivoli Storage Productivity Center v5.1 release. Also, IBM now officially supports "Gateway configurations" that have the storage nodes connected to XIV or Storwize v7000 disk systems. These gateway configurations offer new flexible choices and options for our ever-expanding set of clients.
ProtecTIER appliances and gateways
IBM ProtecTIER line of data deduplication appliances and gateways add CIFS file system support. Rather than using OST or a VTL interface, you now have CIFS as a new option for host attach. Also, IBM introduces the new TS7620 Express model, with options for 5.4TB and 11TB in capacity, replacing the previous TS7610 entry level.
LTFS Storage Manager
The Linear Tape File System (LTFS) allows files to be stored on tape cartridges in a manner that allows them to be mounted as file systems, much like a USB memory stick. The new LTFS Storage Manager software allows you to manage a collection of files across a set of cartridges, moving files from one cartridge to another, consolidating valid data onto fewer cartridges, and removing files no longer needed. This is sometimes referred to as "lifecycle management".
Tape System Library Manager
When IBM first introduced the "shuttle" that allowed up to fifteen TS3500 tape libraries to be connected together into a single system, only HPSS customers could take advantage of this. Software was required to coordinate the movement of cartridges from one library to another. The new IBM Tape System Library Manager now offers an alternative to HPSS for coordinating this activity.
DS8000 v6.3 microcode
IBM now offers 400GB solid-state drives. IBM's market leading support for Full Disk Encryption (FDE) is now extended to cover all drive speeds, from the slowest 7200RPM NL-SAS drives up to the fastest solid-state. IBM Easy Tier extends its super-easy implementation to work across all three of these tiers including encryption.
IBM now offers implementation services for IBM XIV Gen3 storage system, and the N series models 3220 and 3240.
This week I am on the road visiting various clients. Next week, Moscow Russia for the "Edge Comes to You" event!
This week I am in Moscow, Russia for today's "Edge Comes to You" event. Although we had over 20 countries represented at the Edge2012 conference in Orlando, Florida earlier this month, IBM realizes that not everyone can travel to the United States. So, IBM has created the "Edge Comes to You" events where a condensed subset of the agenda is presented. Over the next four months, these events are planned in about two dozen other countries.
This is my first time in Russia, and the weather was very nice. With over 11 million people, Moscow is the 6th largest city in the world, and boasts having the largest community of billionaires. With this trip, I have now been to all five of the so-called BRICK countries (Brazil, Russia, India, China and Korea) in the past five years!
The venue was the [Info Space Transtvo Conference Center] not far from the Kremlin. While Barack Obama was making friends with Vladimir Putin this week at the G2012 Summit in Mexico, I was making friends with the lovely ladies at the check-in counter.
If it looks like some of the letters are backwards, that is not an illusion. The Russian language uses the [Cyrillic alphabet]. The backwards N ("И"), backwards R ("Я"), the number 3 ("З), and what looks like the big blue staple logo from Netapp ("П"), are actually all characters in this alphabet.
Having spent eight years in a fraternity during college, I found these not much different from the Greek alphabet. Once you learn how to pronounce each of the 33 characters, you can get by quite nicely in Moscow. I successfully navigated my way through Moscow's famous subway system, and ordered food on restaurant menus.
The conference coordinators were Tatiana Eltekova (left) and Natalia Grebenshchikova (right). Business is booming in Russia, and IBM just opened ten new branch offices throughout the country this month. So these two ladies in the marketing department have been quite busy lately.
I especially liked all the attention to detail. For example, the signage was crisp and clean, and the graphics all matched the Powerpoint charts of each presentation.
Moscow is close to the North pole, similar in latitude as Juneau, Alaska; Edinburgh, Scottland; Copenhagen, Denmark; and Stockholm, Sweden.
As a result, it is daylight for nearly 18 hours a day. The first part of the day, from 8:00am to 4:30pm, was "Technical Edge", a condensed version of the 4.5 day event in Orlando, Florida. I gave three of the five keynote presentations:
Game Change on a Smarter Planet: A New Era in IT, discussing Smarter Computing and Expert-Integrated systems, based on what Rod Adkins presented in Orlando.
A New Approach to Storage, explaining IBM Smarter Storage for Smarter Computing, IBM's new approach to the way storage is designed and deployed for our clients
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy! explaining how IBM Watson technologies are being used in Healthcare and Financial Services, based on what I presented in Orlando.
(Note: I do not speak Russian fluently enough to give a technical presentation, so I did then entire presentation in English, and had real-time translators convert to Russian for me. The audience wore headphones. However, I was able to sprinkly a few Russian phrases, such as "доброе утро", "Я не понимаю по-русский" and "спасибо".)
After the keynote sessions, I was interviewed by a journalist for [Storage News] magazine. The questions covered a variety of topics, from the implications of [Big Data analytics] to the future of storage devices that employ [Phase Change Memory]. I look forward to reading the article when it gets published!
The afternoon had break-out sessions in three separate rooms. Each room hosted seven topics, giving the attendees plenty to choose from for each time slot. I presented one of these break-out sessions, Big Data Cloud Storage Technology Comparison. The title was already printed in all the agendas, so we went with it, but I would have rather called it "Big Data Storage Options". In this session, I explained Hadoop, InfoSphere BigInsights, internal and external storage options.
I spent some time comparing Hadoop File System (HDFS) with IBM's own General Parallel File System (GPFS) which now offers Hadoop interfaces in a Shared-Nothing Cluster (SNC) configuration. IBM GPFS is about twice as fast as HDFS for typical workloads.
At the end of the Technical Edge event, there was a prize draw. Business cards were drawn at random, and three lucky attendees won a complete four-volume set of my book series "Inside System Storage"! Sadly, these got held up in customs, so we provided a "certificate" to redeem them for the books when they arrive to the IBM office.
The second part of the day, from 5:00pm to 8pm, was "Executive Edge", a condensed version of the 2 day event in Orlando, designed for CIOs and IT leaders. Having this event in the evening allowed busy executives to come over after they spend the day in the office. I presented IBM Storage Strategy in the Smarter Computing Era, similar to my presentation in Orlando.
Both events were well-attended. Despite fighting jet lag across 11 time zones, I managed to hang in there for the entire day. I got great feedback and comments from the attendees. I look forward to hearing how the other "Edge Comes to You" events fare in the other countries. I would like to thank Tatiana and Natalia for their excellent work organizing and running this event!