This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections Platform is now in read-only mode and content is only available for viewing. No new wiki pages, posts, or messages may be added. Please see our FAQ for more information. The developerWorks Connections platform will officially shut down on March 31, 2020 and content will no longer be available. More details available on our FAQ. (Read in Japanese.)
IDC announced that IBM was number #1 in storage hardware (disk and tape combined)for 2006. Here are some excerpts from the IBM press release:
The newly released May 2007 report  by leading industry analyst firm IDC, "Worldwide Combined Disk and Tape Storage 2006 Market Share Update," shows IBM in the #1 overall position for all disk and tape storage hardware for the full year 2006.
In a total disk and tape storage hardware segment that increased to $28.2 billion in 2006, IBM captured 22.2 percent of the combined revenue for full year 2006, besting HP's 20.9 percent and EMC's 13.2 percent.
Five years ago, IBM was only #3 in this area, butis this new standing from IBM doing things better, or HP and EMC doing things poorly? Probably a little of both, but since it's not polite to point out the flaws of others in a blog, I will focus on what IBM is doing right, and I think our leadership in tape accounts for a good measure of this.
The resurgence of tape comes from a variety of factors:
The focus on being "green", to conserve energy power and cooling costs. Tape is the cheapest storage in this regard, as the tape cartridges only consume power when read or written.
Government regulations where more data must be stored for longer periods of time, such as theFederal Rules of Civil Procedures (FRCP), Sarbanes-Oxley, SEC regulations, and so on.
The widening gap in dollars per MB. Advancements in tape are outpacing disk. Disk is slowing down to about 25% improvement year on year, but tape continues its 30-40% improvement curve. A solution like Information Lifecycle Management (ILM) that moves older less valuable data from disk to tape can result in excellent cost savings.
Exciting "combined storage" solutions like the IBM System Storage DR550 and the IBM Grid Medical Archive Solution (GMAS) that combine disk and tape with internal hierarchy storage management of data, based on policies.
Many often associate CAS with EMC's Centera offering, but with IBM's comprehensive set of compliance storageofferings, EMC doesn't talk about CAS or Centera much anymore.I covered the confusion around CAS in a previous post. When clients ask for "CAS" what they really are looking for is storage designed forfixed content, unstructured data that doesn't change once written. A lot of data falls under this category, such as scanned documents, audio and video recordings, medical images, and so on. Some laws and regulations further require enforcement that the data is not deleted or tampered with, until some time after an event or expiration date is met.
In the past, clients used write-once read-many (WORM) optical media, but today we have disk and tape offerings instead. Since the term "WORM" is inappropriate fordisk-based solutions, IBM has standardized to the use of the term "non-erasable, non-rewriteable" (NENR) to discusstoday's solutions and offerings.
Let's recap what IBM has to offer:
IBM System Storage DR550
This comes in both large version (DR550) andsmall version (DR550 Express).Both offerings provide NENR protection of fixed content data with your choice of a disk-only or disk-and-tape configuration. IBM also announced a DR550 file system gateway, extending the number of applications that can take advantage of this offering.
IBM System Storage N series with SnapLock(tm)
IBM has seen great success with the N series disk systems. A specificfeature called SnapLock allows some of the data stored to be NENR protected until an expiration date is met. As partof IBM's emphasis for "unified storage", a single N series appliance or gateway can manage both regular (erasable/modifiable) data with NENR data. Combining this with our recently announced Advanced Single InstanceStorage (A-SIS) de-duplication feature, and you get a very cost-effective offering!
IBM System Storage Multilevel Grid Access Manager Software
A fourth option for NENR data is WORM tape. IBM supports WORM cartridge media in both the enterprise TS1120 drive as well as LTO3 and LTO4 drives. The advantage is that you don't need unique tape drives for WORM support. IBM drives can read and write both regular and WORM cartridges, and provide a cost-effective alternative to optical media.
As you see, IBM doesn't limit itself to disk-only offerings. Our leadership in tape allows us to innovate tape and disk-and-tape offerings that can provide more cost-effective solutions to store fixed content, retention managed data.The next time you have a conversation with a storage vendor, don't ask for CAS, ask instead for archive and compliance storage. Broaden your mind, and broaden the set of options and choices that might provide a better fit for your requirements.
Well it's already Tuesday here in Australia. Many people here have asked me what my secrets are for dealing withJet Lag, as many Aussies (and Kiwis) travel across time zones for business. While Sydney is 17 hours "ahead" of Arizona right now, my body feels like it is 7 hours of time zones "behind". If you do nothing, your body will naturally adjust, about one time zone per day, which is completely unacceptable for most week-long business trips.Since I have been traveling for IBM since 1989, I have read a lot on this, and tried a lot of things, and here's what works for me.
Disclaimer: I am not a doctor, consult a doctor if you have any questions
Before the Trip
People are normally on a 24-hour circadian rhythm. Change this to 48-hours by alternating light-eating and heavy-eating days. Why? a 7-hour shift to a 48-hour cycle is not as bad as for a 24-hour cycle. A Light-eating day may involve a light breakfast, light lunch and either no dinner or just appetizers. A heavy-eating day involves bigger meals, and perhaps snacks between meals. Plan to have the day you step on the plane as your last light-eating day. I normally start this 5 days before the trip.
Adjust your drinking schedule.
Before noon, drink water and juice only, no caffeine, no alcohol, no shots of tequila as morning mouthwash. My drink of choice in the mornings on airplanes is spicy tomato juice, which some people call "Bloody Mary Mix" without the alcohol.
Noon to 4pm, drink caffeinated products, like coffee, tea or soft drinks. If you normally don't drink caffeine at all, here's your reason to start. It will "center" your day.
After 4pm, drink alcohol, like red wine which is good for your for the health of your heart and lungs, but no caffeine, cola-based mixed drinks or late night cappuccinos. If you normally don't drink alcohol, drink water or juice instead.
This revised drinking schedule is good advice year round, wherever you are, but you can start this 5 days before the trip also.
During the Flight
Immediately upon getting seated, adjust your watch to the destination time. This will help you determine when you should be awake or asleep on the flight. For example, I left 10pm Los Angeles, and arrived 6am into Sydney. I reset my watch to 3pm had my first meal, stayed awake to watch a few movies, slept for 6 hours, and then was awake the last two hours before landing for breakfast.
Sometimes, this time adjustment might mean sleeping through dinner or breakfast served on the plane. Survivalists indicate that people cansurvive on several weeks without food, and most American businessmen carry enough body fat to hibernate through winter, so don't feel bad skipping a meal. Some airlines provide "don't wake me up" stickers you can attach to your seat or shoulder. I also tell the people around me "If I am asleep DON'T wake me up for drinks or meals." Despite this, people will wake you up anyways, and if this happens, be pleasant, indicate again that you are not hungry, and prefer to sleep instead.
The drink schedule applies to the new time zone on the plane. Depending on when you are served, drink water, juice, caffeine, or alcohol, based on the destination time zone.
Once you arrive
Focus on being awake from 9am to 5pm in the new local time zone. You can then work to adjust your hours from there.
For at least the first three days at your new location, eat high-protein breakfasts and lunches, like eggs and meats, which will keep you more awake. The drinking schedule still applies, so no coffee or tea in the morning, but some during lunch is fine, again to "center" your day. Eat high-carbohydrate dinners, like salads, vegetables and pasta. No caffeine, have alcohol, juice or water instead.
Many say that it is best to be in bright sunlight during the day, and darkness at night, to reset your circadian rhythm. Scientists have suggested your sensor is in the popliteal region (backs of your knees) and is discussed by The Straight Dope. While I have never strapped aflashlight to my legs, I do find wearing shorts or bathing suits and being outdoors during the day, and wearing long pants and being indoors in dark conditions during the night to be helpful. If you take a nap during the day, make sure your drapes are wide open and sleep on your belly, letting the backs of your knees to get plenty of sunlight, to remind your body you are taking a "day-time" nap. If you find yourself awake at night, keep your legs covered under the bed, wear long-legged pajamas or sweat pants, use minimal lighting like a bedside night lamp, to remind your body you are "reverse napping" (being awake for a short time during a sleep period).
Exercise in the morning. I do this in Tucson, so it is routine and habit to continue at the new location. Sometimes just walking around your new surroundings can be enough to help you adjust to the new time zone, and is a good excuse for wearing shorts or your bathing suit.
About 3-5 days before returning, go back to the "Before the Trip" process and start alternating meals again. Follow the process and act as if returning home is a new trip to deal with jet lag in the reverse direction.
Yesterday, IBM announced a variety of new storage offerings. Our theme this time around was "Policies and Performance". Here's a quick recap.
IBM offers new appliance and gateway models of its popular "unified storage" IBM System Storage N series disk systems.The N5300 appliance has two models. A10 for the single-controller, and A20 for the dual-controller model. The N5600 gateway also has two models. G10 for the single-controller, and G20 for the dual-controller model.A new EXN4000 disk expansion drawer is 3U high, and can hold up to 14 disks. It can support 1Gbps, 2Gpbs and 4Gpbs speeds.In addition to all this new "performance", we offer a new "policy" called the Advanced Single Instance Storage feature for the N5000 and N7000 series, which provides de-duplication at the block level. This can be particularly useful if you are using your N series for e-mail, document publishing, databases, backups or archives.
SAN Volume Controller
A technology refresh with the new 8G4 model. Like its predecessor, the 8F4, this new model has 8GB of cache per node, and is fitted with 4Gpbs SAN attachment ports. The difference is that the 8G4 is based on our successfulIBM System x3550 server.This baby screams, so I look forward to seeing the updated SPC-1 and SPC-2 performance benchmark ratings.The new SVC 4.2 software provides additional authentication policies for more granular administration support, andmulti-destination FlashCopy (one source copied to up to 16 destination copies at the same time).
The DS8000 series now supports having third and fourth expansion frames. This was actually already available via RPQ, but now it can be directly ordered.This means that you can now hold up to half a Petabyte in a single disk system.
IBM TotalStorage Productivity Center v3.3 offers policy and performance-based guidance in configuring disk system volumes, specification of paths between hosts and disk systems during storage provisioning, policy-based specification of zone membership, configuration analysis capabilities, configuration change management, extended tape management, and both content-sensitive and scalable enterprise-wide reports. There is also a version specifically designedto manage disk replication on System z platforms.
Deep Computing Storage
The IBM System Storage DCS9550 Storage System comes in a 4U controller and 3U disk expansion drawers. It is designed for High Performance Computing (HPC) such as genome medical research, government research and rich media applications.
Our clients tell us they need performance to meet their dynamic business demands, and policies to help them manage the ever growing size of their storage infrastructure. We listened!