This blog is for the open exchange of ideas relating to IBM Systems, storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
Tony Pearson is a Master Inventor, Senior IT Architect and Event Content Manager for [IBM Systems for IBM Systems Technical University] events. With over 30 years with IBM Systems, Tony is frequent traveler, speaking to clients at events throughout the world.
Lloyd Dean is an IBM Senior Certified Executive IT Architect in Infrastructure Architecture. Lloyd has held numerous senior technical roles at IBM during his 19 plus years at IBM. Lloyd most recently has been leading efforts across the Communication/CSI Market as a senior Storage Solution Architect/CTS covering the Kansas City territory. In prior years Lloyd supported the industry accounts as a Storage Solution architect and prior to that as a Storage Software Solutions specialist during his time in the ATS organization.
Lloyd currently supports North America storage sales teams in his Storage Software Solution Architecture SME role in the Washington Systems Center team. His current focus is with IBM Cloud Private and he will be delivering and supporting sessions at Think2019, and Storage Technical University on the Value of IBM storage in this high value IBM solution a part of the IBM Cloud strategy. Lloyd maintains a Subject Matter Expert status across the IBM Spectrum Storage Software solutions. You can follow Lloyd on Twitter @ldean0558 and LinkedIn Lloyd Dean.
Tony Pearson's books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
The developerWorks Connections Platform is now in read-only mode and content is only available for viewing. No new wiki pages, posts, or messages may be added. Please see our FAQ for more information. The developerWorks Connections platform will officially shut down on March 31, 2020 and content will no longer be available. More details available on our FAQ. (Read in Japanese.)
IPv4, IPv6, Wireless Mesh networking? No problem! You know linux networking inside and out
Extensive knowledge of BIND, DHCPD, Squid, Apache, security, etc.
Experience working with [Moodle] would be most excellent (it is basically a PHP web application that maintains MySQL databases for lesson plans, homework assignments and other school related information)
Adept with Python scripting or could learn it quickly. OLPC has standardized on Python for scripting (although knowledge in Perl and PHP won't hurt either)
You look to implement a practical solution that less skilled sysadmins can easily maintain over a cooler but more complicated solution.
You play well with others. You don’t alienate collaborators with rude e-mails that assert your technical superiority (even though you are)
Your primary concern is meeting the educational needs of kids and teachers. Your rate technical awesomeness a distant second to meeting those critical needs.
I've been working with Dev, Bryan and Sulochan for the past three months (remotely here from Tucson, AZ)but we've come to a point where we need on-site expertise. I will continue to provide remote support.
Given the number of readers who have contacted me over the past year looking for an IT job (or a different job because they are not happy where they are), this could be an amazing experience.
It's been a while since I've talked about [Second Life].
The latest post on eightbar[Spimes, Motes and Data centers]discusses IBM's use of virtual world technology to analyze data centers in three dimensions.New World Note asks[What's The Point Of 3D Data Centers?]One would think that a simple monitoring tool based on a two-dimensional floor plan would be enough to evaluate a data center.
Enter Michael Osias, IBM (a.k.a Illuminous Beltran in Second Life). Some of the leading news sites havebegun to notice some 3D data centers that he has helped pioneer. UgoTrade writes up an article aboutMichael and the media attention in [The Wizard of IBM's 3DData Centers].
Of course, in presenting these "Real Life/Second Life" (RL/SL) interactive technologies, IBM is sometimes the target of ridicule. Why? Because IBM is 10 years ahead of everyone else. So, are there aspects of a data center where 3D interfaces makes sense? I think there is.
IBM TotalStorage Productivity Center has an awesome "topology viewer" that shows what servers are connectedto which switches, to which disk systems and tape libraries. This is all done in a 2D diagram, generated dynamicallywith data discovered through open standard interfaces, similar to what you might draw manually with toolslike Visio. Imagine, however, howmore powerful if it were a 3D viewer, with virtual equipment mapped to the physical location of each pieceof hardware on the data center floor, including the position on the rack and location on the data center floor.
Designing computer room air conditioning (CRAC) systems is actually a three dimensional problem. Cold air isfed underneath the raised floor, comes up through strategically placed "vent" tiles, taken in the front ofeach rack. Hot air comes out the back of each rack, and hopefully finds ceiling duct intake to get cooled again.The temperature six inches off the floor is different than the temperature six feet off the floor, and 3Dmonitor tools could be helpful in identifying "hot spots" that need attention. In this case "spimes" representsensors in the 3D virtual world, able to report back information to help diagnose problems or monitor events.
After many people left the mainframe in favor of running a single application per distributed server, the pendulumhas finally swung back. Companies are discovering the many benefits of changing this behavior. "Re-centralization" is the task at hand. Thanks to virtualization of servers, networks and storage, sharing common resources canonce again claim the benefits of economies of scale. In many cases, servers work together in collective unitsfor specific applications that might benefit better if consolidated together onto the same equipment.
IBM's "New Enterprise Data Center" vision recognizes that people will need to focus on the management aspectsof their IT infrastructure, and 3D virtual world technologies might be an effective way to getthe job done.
I am always amused in the manner the IT industry tries to solve problems. Take, for example, theprocess of backups. The simplest approach is to backup everything, and keep "n" versions of that.Simple enough for a small customer who has only a handful of machines, but does not scale well. Inmy post [Times a Million],I coined the phrase "laptop mentality", referring to people's inability to think through solutions in large scale.
Apparently, I am not alone.Steve Duplessie (ESG) wrote in his post[Random Thoughts]:
"I may even get to stop yelling at people to stop doing full backups every week on non-changing data (which is 80 %+) just because that's how they used to do it. They won't have a choice. You can't back up 5X your current data the way you do (or don't) today."
Hu Yoshida (HDS) does a great job explaining that thereare three ways to perform deduplication for backups:
Pre-processing. Have the backup software not backup unchanged data.
Inline processing. Have an index to filter the output of the backup as it sends data to storage.
Post-processing. Have the receiving storage detect duplicates and handle them accordingly.
"A full backup of 1TB data base tablespace is taken on day one. The next day another full backup is taken and only 2GB of that backup has any changes.
Using traditional full backup approaches after 2 nights, the backup capacity required is 2 x 1TB = 2TB
One method of calculating de-duplication ratios could yield a low ratio:
Total de-duplicated backup capacity used = 1TB + 2GB = 1.002TB
If the de-duplication ratio compares the amount of total physical storage used to the total amount that would have been used by traditional backup methods, the ratio = 2TB / 1.002TB = approximately 2:1
Another method of calculating de-duplication ratios could yield a high ratio:
Total de-duplicated backup capacity used still = 1.002TB
If the de-duplication ratio compares the amount of data stored in the most recent (second) backup to the amount that would have been used by traditional backup methods, the ratio 1TB / 2GB = 1000GB / 2GB = 500:1"
While IBM also offers deduplication in the IBM System Storage N series disk systems, I find that for backup, itis often more effective to apply best practices via IBM Tivoli Storage Manager (TSM). Let's take a look at some:
Exclude Operating System files
Why take full backups of your operating system every day? Yes, deduplication will find a lot to reduce fromthis, but best practices would exclude these. TSM has an include/exclude list, and the default version excludesall the operating system files that would be recovered from "bare machine recovery" or "new system install"procedures. Often, if the replacement machine has different gear inside, your OS backups aren't what you need,and a fresh OS install may determine this and install different drivers or different settings.
Exclude Application programs
Again, yes if there are several machines running the same application, you probably have opportunity for deduplication. However, unless you match these up with the appropriate registry or settings buried down in theoperating system, recovering just application program files may render an unusable system. Applications are bestinstalled from a common source that are either "pushed" through software distribution, or "pulled" from an application installation space.
If you have TB-sized databases, and are only doing full backups daily to protect it, have I got a solution for you.IBM and others have software that are "application-aware" and "database-aware" enough to determine what haschanged since the last backup and copy only that delta. Taking advantage of the TSM Application ProgrammingInterface (API) allows for both IBM and third party tools to take these delta backups correctly.
Which leaves us with user files, which are often unique enough on their own from the files of other users,that would not benefit from file-level deduplication. Backing up changed data only, as TSM does with its patented ["progressive incremental backup"] method, generally gets most of the benefits described by deduplication, without having to purchase storage hardware features.
Of course, if two or more users have identical files, the question might be why these are not stored on acommon file share. NAS file share repositories can greatly reduce each user keeping their own set of duplicates.It is interesting that some block-oriented deduplication,such as that found in the IBM System Storage N series, can get some benefit because some user files are oftenderivatives of other files, and there might be some 4 KB blocks of data in common.
Last November, I visited a customer in Canada. All of their problems were a direct result of taking full backupsevery weekend. It put a strain on their network; it used up too many disk and tape resources; and it took too long tocomplete. They asked about virtual tape libraries, deduplication, and anything else that could help them. The answer was simple: switch to IBM Tivoli Storage Manager and apply best practices.
On Tuesday, I covered much of the Feb 26 announcements, but left the IBM System Storage DS8000 for today so that it can haveits own special focus.
Many of the enhancements relate to z/OS Global Mirror, which we formerly called eXtended Remote Copy or "XRC", not to be confused with our "regular" Global Mirror that applies to all data. For those not familiar with z/OS Global Mirror, here is how it works. The production mainframe writes updates to the DS8000, and the DS8000 keeps track of these in cache until a "reader" can pull them over to the secondary location.The "reader" is called System Data Mover (SDM) which runs in its own address space under z/OS operating system. Thanks to some work my team did several years ago, z/OS Global Mirror was able to extend beyond z/OS volumes and include Linux on System z data. Linux on System z can use a "Compatible Disk Layout" (CDL) format (now the default) that meetsall the requirements to be included in the copy session.
IBM has over 300 deployments of z/OS Global Mirror, mostly banks, brokerages and insurance companies. The feature can keep tens of thousands of volumes in one big "consistency group" and asynchronously mirror them to any distance on the planet, with the secondary copy recovery point objective (RPO) only a few seconds behind the primary.
Extended Distance FICON
Extended Distance FICON is an enhancement to the industry-standard FICON architecture (FC-SB-3) that can help avoid degradation of performance at extended distances by implementing a new protocol for "persistent" Information Unit (IU) pacing. This deals with the number of packets in flight between servers and storage separated by long distances, andcan keep a link fully utilized at 4Gpbs FICON up to 50 kilometers. This is particularly important for z/OS GlobalMirror "reader" System Data Mover (SDM). By having many "reads" in flight, this enhancementcan help reduce the need for spoofing or channel-extender equipment, or allow you to choose lower-costchannel extenders based on "frame-forwarding" technology. All of this helps reduce your total cost of ownership (TCO)for a complete end-to-end solution.
This feature will be available in March as a no-charge update to the DS8000 microcode.For more details, see the [IBM Press Release]
z/OS Global Mirror process offload to zIIP processors
To understand this one, you need to understand the different "specialty engines" available on the System z.
On distributed systems where you run a single application on a single piece of server hardware, you mightpay "per server", "per processor" or lately "per core" for dual-core and quad-core processors. Software vendors were looking for a way to charge smaller companies less, and larger companies more. However, you might end up paying the same whether you use 1GHz Intelor 4GHz Intel processor, even though the latter can do four times more work per unit time.
The mainframe has a few processors for hundreds or thousands of business applications.In the beginning, all engines on a mainframe were general-purpose "Central Processor" or CP engines. Based on theircycle rate, IBM was able to publish the number of Million Instructions per Second (MIPS) that a machine witha given number of CP engines can do. With the introduction of side co-processors, this was changed to "Millionsof Service Units" or MSU. Software licensing can charge per MSU, and this allows applications running in aslittle as one percent of a processor to get appropriately charged.
One of the first specialty engines was the IFL, the "Integrated Facility for Linux". This was a CP designatedto only run z/VM and Linux on the mainframe. You could "buy" an IFL on your mainframe much cheaper than a CP,and none of your z/OS application software would count it in the MSU calculations because z/OS can't run on theIFL. This made it very practical to run new Linux workloads.
In 2004, IBM introduced "z Application Assist Processor" (zAAP) engines to run Java, and in 2006, the "z Integrated Information Processor" (zIIP) engines to run database and background data movement activities.By not having these counted in the MSU number for business applications, it greatly reduced the cost for mainframe software.
Tuesday's announcement is that the SDM "reader" will now run in a zIIP engine, reducing the costs for applicationsthat run on that machine. Note that the CP, IFL, zAAP and zIIP engines are all identical cores. The z10 EC hasup to 64 of these (16 quad-core) and you can designate any core as any of these engine types.
Faster z/OS Global Mirror Incremental Resync
One way to set up a 3-site disaster recovery protection is to have your production synchronously mirrored to a second site nearby, and at the same time asynchronously mirrored to a remote location. On the System z,you can have site "A" using synchronous IBM System Storage Metro Mirror over to nearby site "B", and alsohave site "A" sending data over to size "C" using z/OS Global Mirror. This is called "Metro z/OS Global Mirror"or "MzGM" for short.
In the past, if the disk in site A failed, you would switch over to site B, and then send all the data all over again. This is because site B was not tracking what the SDM reader had or had not yet processed.With Tuesday's announcement, IBM has developed an "incremental resync" where site B figures out what theincremental delta is to connect to the z/OS Global Mirror at site "C", and this is 95% faster than sendingall the data over.
IBM Basic HyperSwap for z/OS
What if you are sending all of your data from one location to another, and one disk system fails? Do you declare a disaster and switch over entirely? With HyperSwap, you only switch over the disk systems, but leave therest of the servers alone. In the past, this involved hiring IBM Global Technology Services to implementa Geographically Dispersed Parallel Sysplex (GDPS) with software that monitors the situation and updates thez/OS operating system when a HyperSwap had occurred. All application I/O that were writing to the primary locationare automatically re-routed to the disks at the secondary location. HyperSwap can do this for all the disk systems involved,allowing applications at the primary location to continue running uninterrupted.
HyperSwap is a very popular feature, but not everyone has implemented the advanced GDPS capabilities.To address this, IBM now offers "Basic HyperSwap", which is actually going to be shipped as IBMTotalStorage Productivity Center for Replication Basic Edition for System z. This will run in a z/OSaddress space, and use either the DB2 RDBMS you already have, or provide you Apache Derby database for thosefew out there who don't have DB2 on their mainframe already.
Update: There has been some confusion on this last point, so let me explain the keydifferences between the different levels of service:
Basic HyperSwap: single-site high availability for the disk systems only
GDPS/PPRC HyperSwap Manager: single- or multi-site high availability for the disk systems, plus some entry-level disaster recovery capability
GDPS/PPRC: highly automated end-to-end disaster recovery solution for servers, storage and networks
I apologize to all my colleagues who thought I implied that Basic HyperSwap was a full replacement for the morefull-function GDPS service offerings.
Extended Address Volumes (EAV)
Up until now, the largest volume you could have was only 54 GB in size, and many customers still are using 3 GB and 9 GB volume sizes. Now, IBM will introduce 223 GB volumes. You can have any kind of data set on these volumes,but only VSAM data sets can reside on cylinders beyond the first 65,280. That is because many applications still thinkthat 65,280 is the largest cylinder number you can have.
This is important because a mainframe, or a set of mainframes clustered together, can only have about 60,000disk volumes total. The 60,000 is actually the Unit Control Block (UCB) limit, and besides disk volumes, youcan have "virtual" PAVs that serve as an alias to existing volumes to provide concurrent access.
Aside from the first item, the Extended Distance FICON, the other enhancements are "preview announcements" which means that IBM has not yet worked out the final details of price, packaging or delivery date. In many cases, the work is done, has been tested in our labs, or running beta in select client locations, but for completeness I am required to make the following disclaimer:
All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal without notice. Availability, prices, ordering information, and terms and conditions will be provided when the product is announced for general availability.
Yesterday, I asked if you were prepared for the future? The future is now. Today, IBM announced its["New Enterprise Data Center"] vision and strategy which spans software, hardware and services in dealing withthe latest challenges that our clients are faced with today, or will face sooner or later this century.
Here's an excerpt:
Align IT with business goals These changes demand that IT improve cost and service delivery, manage escalating complexity, and better secure the enterprise. And aligning IT more closely with the business becomes a primary goal. The new enterprise data center is an evolutionary new model for efficient IT delivery that helps provide the freedom to drive business innovation. Through a service oriented model, IT will be able to better manage costs, improve operational performance and resiliency, and more quickly respond to business needs. This approach will deliver dynamic and seamless access to IT services and resources, improving both productivity and satisfaction.
IBM's Vision for the New Enterprise Data Center The new enterprise data center can improve the integration of people, process, and technology in your business to help you improve efficiency and effectiveness. As you implement a new enterprise data center strategy, your infrastructure becomes open, efficient, and easy to manage. And your IT staff can move from a focus on fixing IT problems to solving business challenges. Ultimately your processes become standardized and efficient, focused on business needs rather than technology.
A lot was announced today, so I will give a quick recap now, and cover specific areas over the rest of the week.
IBM System z10 Enteprise Class
IBM introduces its most powerful mainframe. Before you think "Wait, that's a mainframe, that doesn't apply to me"stop to consider all that IBM has done to make the mainframe an "open system" without sacrificing security oravailability:
Open standard connectivity, including TCP/IP and now 6Gbps Infiniband and 10GbE Ethernet.
Unix System Services. Yes, z/OS is certified to provide UNIX interfaces for today's applications.
HFS and zFS file systems that can be mounted, shared, and used by traditional z/OS applications and JCL.
Linux and Java. Many of today's largest websites are run on mainframes behind the scenes.
Extreme bandwidth. The z10 EC handles up to 336 FICON channels (4Gbps) for large data processing workloads
The z10 EC is as powerful as 1,500 x86 (such as Intel or AMD) servers, but consumes 85 percent less floorspace and85 percent less energy. (They should put a "green" stripe down the front of this box just to remind everyone how energy efficient this server really is!) For more on the z10 EC, see the[Press Release].
Enhanced IBM System Storage DS8000
With the XIV acquisition taking the role as the best place to put unstructured files for Web 2.0 applications,the IBM DS8000 can focus on its core strength, managing databases and online transactions for the mainframe.There's enough here to justify its own post, so I will cover this later.
IT Service Management Center for z (ITSMCz)
Trust me, I don't make up these acronyms. IT Service Management are the policies and procedures for managingan IT environment, such as following the best practices documented in the IT Infrastructure Library (ITIL).In the past, IBM tools have focused on Linux, UNIX and Windows on distributed servers, but today ITSMCz bringsall of that to the mainframe! (or perhaps more correct to say "brings the mainframe to all that"!)
IT Transformation & Optimization - Infrastructure Strategy and Planning services
I don't make up the names of our service offerings either. However, one thing is clear, it is time for peopleto re-evaluate their current data center, and come up with a new plan. The average data center is 15 years old.According to Gartner Group, more than 70 percent of the world's "Global 1000" organizations will have to make significant modifications to their data centers in the next five years. IBM can help, and is rolling outa new set of services specifically to help clients make this transition, to better align their IT to their business strategies.
Economic Stimulus Package
IBM borrowed this idea from the U.S. government. IBM Global Financing is offering special terms and ratesfor new equipment installed by December 31 this year.
Want to learn more? Read this 15-page[IBM's Vision]white paper.