Have you ever noticed that sometimes two movies come out that seem eerily similar to each other, released by different studios within months or weeks of each other? My sister used to review film scripts for a living, she would read ten of them and have to pick her top three favorites, and tells me that scripts for nearly identical concepts came all the time. Here are a few of my favorite examples:
- 1994: [Wyatt Earp] and [Tombstone] were Westerns recounting the famed gunfight at the O.K. Corral. Tombstone, Arizona is near Tucson, and the gunfight is recreated fairly often for tourists.
- 1998: [Armageddon] and [Deep Impact] were a pair of disaster movies dealing with a large rock heading to destroy all life on earth. I was in Mazatlan, Mexico to see the latter, dubbed in Spanish as "Impacto Profundo".
- 1998: [A Bug's Life] and [Antz] were computer-animated tales of the struggle of one individual ant in an ant colony.
- 2000: [Mission to Mars] and [Red Planet] were sci-fi pics exploring what a manned mission to our neighboring planet might entail.
- 2009: [Paul Blart: Mall Cop] and [Observe and Report] were comedies dealing with challenges of security at a shopping mall.
(I think I made my point with just a few examples. A more complete list can be found on [Sam Greenspan's 11 Points website].)
This is different than copy-cat movies that are re-made or re-imagined many years later based on the previous successes of an original. Ever since my blog post [VPLEX: EMC's Latest Wheel is Round] in 2010 comparing EMC's copy-cat product that came our seven years after IBM's SAN Volume Controller (SVC), I've noticed EMC doesn't talk about VPLEX that much anymore.
This week, IBM announced [XIV Gen3 Solid-State Drive support] and our friends over at EMC announced [VFCache SSD-based PCIe cards]. Neither of these should be a surprise to anyone who follows the IT industry, as IBM had announced its XIV Gen3 as "SSD-Ready" last year specifically for this purpose, and EMC has been touting its "Project Lightning" since last May.
Fellow blogger Chris Mellor from The Register has a series of articles to cover this, including [EMC crashes the server flash party], [NetApp slaps down Lightning with multi-card Flash flush], [HP may be going the server flash route], and [Now HDS joins the server flash party].
Fellow blogger Chuck Hollis from EMC has a blog post [VFCache means Very Fast Cache indeed] that provides additional detail. Chuck claims the VFCache is faster than popular [Fusion-IO PCIe cards] available for IBM servers. I haven't seen the performance spec sheets, but typically SSD is four to five times slower than the DRAM cache used in the XIV Gen3. The VFCache's SSD is probably similar in performance to the SSD supported in the IBM XIV Gen3, DS8000, DS5000, SVC, N series, and Storwize V7000 disk systems.
Nonetheless, I've been asked my opinions on the comparison between these two announcements, as they both deal with improving application performance through the use of Solid-State Drives as an added layer of read cache.
(FTC Disclosure: I am both a full-time employee and stockholder of the IBM Corporation. The U.S. Federal Trade Commission may consider this blog post as a paid celebrity endorsement of IBM servers and storage systems. This blog post is based on my interpretation and opinions of publicly-available information, as I have no hands-on access to any of these third-party PCIe cards. I have no financial interest in EMC, Fusion-IO, Texas Memory Systems, or any other third party vendor of PCIe cards designed to fit inside IBM servers, and I have not been paid by anyone to mention their name, brands or products on this blog post.)
The solutions are different in that IBM XIV Gen3 the SSD is "storage-side" in the external storage device, and EMC VFCache is "server-side" as a PCI Express [PCIe] card. Aside from that, both implement SSD as an additional read cache layer in front of spinning disk to boost performance. Neither is an industry first, as IBM has offered server-side SSD since 2007, and IBM and EMC have offered storage-side SSD in many of their other external storage devices. The use of SSD as read cache has already been available in IBM N series using [Performance Accelerator Module (PAM)] cards.
IBM has offered cooperative caching synergy between its servers and its storage arrays for some time now. The predecessor to today's POWER7-based were the iSeries i5 servers that used PCI-X IOP cards with cache to connect i5/OS applications to IBM's external disk and tape systems. To compete in this space, EMC created their own PCI-X cards to attach their own disk systems. In 2006, IBM did the right thing for our clients and fostered competition by entering in a [Landmark agreement] with EMC to [license the i5 interfaces]. Today, VIOS on IBM POWER systems allows a much broader choice of disk options for IBM i clients, including the IBM SVC, Storwize V7000 and XIV storage systems.
EMC is not the first to manufacture an SSD-based PCIe card. Last summer, my friends at Texas Memory Systems [TMS] gave away a [RAMsan-70 PCIe card] at an after-party on [Day 2 of the IBM System Storage University].
Can a little SSD really help performance? Yes! An IBM client running a [DB2 Universal Database] cluster across eight System x servers was able to replace an 800-drive EMC Symmetrix by putting eight SSD Fusion-IO cards in each server, for a total of 64 Solid-State drives, saving money and improving performance. DB2 has the Data Partitioning Feature that has multi-system DB2 configurations using a Grid-like architecture similar to how XIV is designed. Most IBM System x and BladeCenter servers support internal SSD storage options, and many offer PCIe slots for third-party SSD cards. Sadly, you can't do this with a VFCache card, since you can have only one VFCache card in each server, the data is unprotected, and only for ephemeral data like transaction logs or other temporary data. With multiple Fusion-IO cards in an IBM server, you can configure a RAID rank across the SSD, and use it for persistent storage like DB2 databases.
Here then is my side-by-side comparison:
|Category||EMC VFCache||IBM XIV Gen3 SSD Caching|
|Servers supported||Selected x86-based models of Cisco UCS, Dell PowerEdge, HP ProLiant DL, and IBM xSeries and System x servers||All of these, plus any other blade or rack-optimized server currently supported by XIV Gen3, including Oracle SPARC, HP Titanium, IBM POWER systems, and even IBM System z mainframes running Linux|
|Operating System support||Linux RHEL 5.6 and 5.7, VMware vSphere 4.1 and 5.0, and Windows 2008 x64 and R2.||All of these, plus all the other operating systems supported by XIV Gen3, including AIX, IBM i, Solaris, HP-UX, and Mac OS X|
|Protocol support||FCP||FCP and iSCSI|
|Vendor-supplied driver required on the server||Yes, the VFCache driver must be installed to use this feature.||No, IBM XIV Gen3 uses native OS-based multi-pathing drivers.|
|External disk storage systems required||None, it appears the VFCache has no direct interaction with the back-end disk array, so in theory the benefits are the same whether you use this VFCache card in front of EMC storage or IBM storage||XIV Gen3 is required, as the SSD slots are not available on older models of IBM XIV.|
|Shared disk support||No, VFCache has to be disabled and removed for vMotion to take place.||Yes! XIV Gen3 SSD caching shared disk supports VMware vMotion and Live Partition Mobility.|
|Support for multiple servers||No||An advantage of the XIV Gen3 SSD caching approach is that the cache can be dynamically allocated to the busiest data from any server or servers.|
|Support for active/active server clusters||No||Yes!|
|Aware of changes made to back-end disk||No, it appears the VFCache has no direct interaction with the back-end disk array, so any changes to the data on the box itself are not communicated back to the VFCache card itself to invalidate the cache contents.||Yes!|
|Sequential-access detection||None identified. However, VFCache only caches blocks 64KB or smaller, so any sequential processing with larger blocks will bypass the VFCache.||Yes! XIV algorithms detect sequential access and avoid polluting the SSD with these blocks of data.|
|Number of SSD supported||One, which seems odd as IBM supports multiple Fusion-IO cards for its servers. However, this is not really a single point of failure (SPOF) as an application experiencing a VFCache failure merely drops down to external disk array speed, no data is lost since it is only read cache.||6 to 15 (one per XIV module) for high availability.|
|Pin data in SSD cache||Yes, using split-card mode, you can designate a portion of the 300GB to serve as Direct-attached storage (DAS). All data written to the DAS portion will be kept in SSD. However, since only one card is supported per server and the data is unprotected, this should only be used for ephemeral data like logs and temp files.||No, there is no option to designate an XIV Gen3 volume to be SSD-only. Consider using Fusion-IO PCIe card as a DAS alternative, or another IBM storage system for that requirement.|
|Pre-sales Estimating tools||None identified||Yes! CDF and Disk Magic tools are available to help cost-justify the purchase of SSD based on workload performance analysis.|
IBM has the advantage that it designs and manufactures both servers and storage, and can design optimal solutions for our clients in that regard.
technorati tags: IBM, XIV, Gen3, SSD, cache, EMC, VFCache, Project Lightning, SVC, Solid State Drives, Fusion-IO, Texas Memory Systems, RAMSan, System+x, POWER systems, VIOS, DRAM, VMware, Vmotion, Live Partition Mobility, AIX, IBM i, PCIe, PCI-X
If you store your VMware bits on external SAN or NAS-based disk storage systems, this post is for you. The subject of the post, VM Volumes, is a potential storage management game changer!
Fellow blogger Stephen Foskett mentioned VM Volumes in his [Introducing VMware vSphere Storage Features] presentation at IBM Edge 2012 conference. His session on VMware's storage features included VMware APIs for Array Integration (VAAI), VMware Array Storage Awareness (VASA), vCenter plug-ins, and a new concept he called "vVol", now more formally known as VM Volumes. This post provides a follow-up to this, describing the VM Volumes concepts, architecture, and value proposition.
"VM Volumes" is a future architecture that VMware is developing in collaboration with IBM and other major storage system vendors. So far, very little information about VM Volumes has been released. At VMworld 2012 Barcelona, VMware highlights VM Volumes for the first time and IBM demonstrates VM Volumes with the IBM XIV Storage System (more about this demo below). VM Volumes is worth your attention -- when it becomes generally available, everyone using storage arrays will have to reconsider their storage management practices in a VMware environment -- no exaggeration!
But enough drama. What is this all about?
(Note: for the sake of clarity, this post refers to block storage only. However, the VM Volumes feature applies to NAS systems as well. Special thanks to Yossi Siles and the XIV development team for their help on this post!)
The VM Volumes concept is simple: VM disks are mapped directly to special volumes on a storage array system, as opposed to storing VMDK files on a vSphere datastore.
The following images illustrate the differences between the two storage management paradigms.
You may still be asking yourself: bottom line, how will I benefit from VM Volumes?
Well, take a VM snapshot for example. With VM Volumes
, vSphere can simply offload the operation by invoking a hardware snapshot of the hardware volume. This has significant implications:
- VM-Granularity: Only the right VMs are copied (with datastores, backing up or cloning individual-VM portions of hardware snapshot of a datastore would require more complex configuration, tools and work)
- Hardware Offload: No ESXi server resources are consumed
- XIV advantage: With XIV, snapshots consume no space upfront and are completed instantly.
Here's the first takeaway: With VM Volumes, advanced storage services (which cost a lot when you buy a storage array), will become available at an individual VM level. In a cloud world, this means that applications can be provisioned easily with advanced storage services, such as snapshots and mirroring.
Now, let's take a closer look at another relevant scenario where VM Volumes will make a lot of difference - provisioning an application with special mirroring requirements:
- VM Volumes case: The application is ordered via the private cloud portal. The requestor checks a box requesting an asynchronous mirror. He changes the default RPO for his needs. When the request is submitted, the process wraps up automatically: Volumes are created on one of the storage arrays, configured with a mirror and RPO exactly as specified. A few minutes later, the requestor receives an automatic mail pointing to the application virtual machine.
- Datastores case #1: As may be expected, a datastore that is mirrored with the special RPO does not exist. As a result, the automated workflow sets a pending status on the request, creates an urgent ticket to a VMware administrator and aborts. When the VMware admin handles that ticket, she re-assigns the ticket to the storage administrator, asking for a new volume which is mirrored with the special RPO, and mapped to the right ESXi cluster. The next day, the volume is created; the ticket is re-assigned to the storage admin, with the new LUN being pointed to. The VMware administrator follows and creates the datastore on top of it. Since the automated workflow was aborted, the admin re-assigns the ticket to the cloud administrator, who sometime later completes the application provisioning manually.
- Datastores case #2: Luckily for the requestor, a datastore that is mirrored with the special RPO does exist. However, that particular datastore is consuming space from a high performance XIV Gen3 system with SSD caching, while the application does not require that level of performance, so the workflow requires a storage administrator approval. The approval is given to save time, but the storage administrator opens a ticket for himself to create a new volume on another array, as well as a follow-up ticket for the VMware admin to create a new datastore using the new volume and migrate the application to the other datastore. In this case, provisioning was relatively rapid, but required manual follow up, involving the two administrators.
Here's the second takeaway: With VM Volumes, management is simplified, and end-to-end automation is much more applicable. The reason is that there are no datastores. Datastores physically group VMs that may otherwise be totally unrelated, and require close coordination between storage and VMware administrators.
Now, the above mainly focuses on the VMware or cloud administrator perspective. How does VM Volumes impact storage management?
VM's are the new hosts: Today, storage administrators have visibility of physical hosts in their management environment. In a non-virtualized environment, this visibility is very helpful. The storage administrator knows exactly which applications in a data center are storage-provisioned or affected by storage management operations because the applications are running on well-known hosts. However, in virtualized environments the association of an application to a physical host is temporary. To keep at least the same level of visibility as in physical environments, VMs should become part of the storage management environment, like hosts. Hosts are still interesting, for example to manage physical storage mapping, but without VM visibility, storage administrators will know less about their operation than they are used to, or need to. VM Volumes enables such visibility, because volumes are provided to individual VMs. The XIV VM Volumes demonstration at VMworld Barcelona, although experimental, shows a view of VM volumes, in XIV's management GUI.
Here's a screenshot:
That's not all!
Storage Profiles and Storage Containers: A Storage Profile is a vSphere specification of a set of storage services. A storage profile can include properties like thin or thick provisioning, mirroring definition, snapshot policy, minimum IOPS, etc.
- Storage administrators define a portfolio of supported storage services, maintained as a set of storage profiles, and published (via VASA integration) to vSphere.
- VMware or cloud administrators define the required storage profiles for specific applications
VMware and storage administrators need to coordinate the typical storage requirements and the automatically-available storage services. When a request to provision an application is made, the associated storage profiles are matched against the published set of available storage profiles. The matching published profiles will be used to create volumes, which will be bound to the application VMs. All that will happen automatically.
Note that when a VM is created today, a datastore must be specified. With VM Volumes, a new management entity called Storage Container (also known as Capacity Pool) replaces the use of datastore as a management object. Each Storage Container exposes a subset of the available storage profiles, as appropriate. The storage container also has a capacity quota.
Here are some more takeaways
- New way to interface vSphere and storage management: Storage administrators structure and publish storage services to vSphere via storage profiles and storage containers.
- Automated provisioning, out of the box: The provisioning process automatically matches application-required storage profiles against storage profiles available from the specified storage containers. There is no need to build custom scripts and custom processes to automate storage provisioning to applications
- The XIV advantage:
- XIV services are very simple to define and publish. The typical number of available storage profiles would be low. It would also be easy to define application storage profiles.
- XIV provides consistent high performance, up to very high capacity utilization levels, without any maintenance. As a result, automated provisioning (which inherently implies less human attention) will not create an elevated risk of reduced performance.
Note: A storage vendor VASA provider is required to support VM Volumes, storage profiles, storage containers and automated provisioning. The IBM Storage VASA provider runs as a standalone service that needs to be deployed on a server.
To summarize the VM Volumes value proposition:
- Streamline cloud operation by providing storage services at VM and application level, enabling end-to-end provisioning automation, and unifying VMware and storage administration around volumes and VMs.
- Increase storage array ROI, improve vSphere scalability and response time, and reduce cloud provisioning lag, by offloading VM-level provisioning, failover, backup, storage migration, storage space recycling, monitoring, and more, to the storage array, using advanced storage operations such as mirroring and snapshots.
- Simplify the adoption of VM Volumes using XIV, with smaller and simpler sets of storage profiles. Apply XIV's supreme fast cloning to individual VMs, and keep automation risks at bay with XIV's consistent high performance.
For additional information about VM Volumes, check out [VMware Storage APIs for VM and Application Granular Data Management] blog post by Duncan Epping, a Principal Architect in the Technical Marketing group at VMware!
Until you can get your hands on a VM Volumes-capable environment, the VMware and IBM developer groups will be collaborating and working hard to realize this game-changing feature. The above information is definitely expected to trigger your questions or comments, and our development teams are eager to learn from them and respond. Enter your comments below, and I will try to answer them, and help shape the next post on this subject. There's much more to be told.
technorati tags: IBM, VMware, vSphere, VM Volumes, vVOL, Stephen Foskett, VMworld, Barcelona, Spain, XIV, RPO, SSD
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
- Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
- Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
- Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
- Simultaneous Background Tasks
The TSM server has many background administrative tasks:
- Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
- Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
- Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
- Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
- Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.
technorati tags: , announcements, IBM, Pulse, conference, TSM, Tivoli, SSAM, backup, archive, VMware, VCB, Hyper-V, Microsoft, SSL, AES, encryption, in-flight, Linux, HP-UX, Solaris, ERP, DB2, Oracle, RMAN, SAP, BR*Tools, ibm-pulse, pulse2010
Well, it's Wednesday, and you know what that means... IBM Announcements!
(Actually most IBM announcements are on Tuesdays, but IBM gave me extra time to recover from my trip to Europe!)
Today, IBM announced [IBM PureSystems], a new family of expert-integrated systems that combine storage, servers, networking, and software, based on IBM's decades of experience in the IT industry. You can register for the [Launch Event] today (April 11) at 2pm EDT, and download the companion "Integrated Expertise" event app for Apple, Android or Blackberry smartphones.
(If you are thinking, "Hey, wait a minute, hasn't this been done before?" you are not alone. Yes, IBM introduced the System/360 back in 1964, and the AS/400 back in 1988, so today's announcement is on scheduled for this 24-year cycle. Based on IBM's past success in this area, others have followed, most recently, Oracle, HP and Cisco.)
Initially, there are two offerings:
- IBM PureFlex™ System
IBM PureFlex is like IaaS-in-a-box, allowing you to manage the system as a pool of virtual resources. It can be used for private cloud deployments, hybrid cloud deployments, or by service providers to offer public cloud solutions. IBM drinks its own champagne, and will have no problem integrating these into its [IBM SmartCloud] offerings.
To simplify ordering, the IBM PureFlex comes in three tee-shirt sizes: Express, Standard and Enterprise.
IBM PureFlex is based on a 10U-high, 19-inch wide, standard rack-mountable chassis that holds 14 bays, organized in a 7 by 2 matrix. Unlike BladeCenter where blades are inserted vertically, the IBM PureFlex nodes are horizontal. Some of the nodes take up a single bay (half-wide), but a few are full-wide, take up two bays, the full 19-inch width of the chassis. Compute and storage snap in the front, while power supplies, fans, and networking snap in the back. You can fit up to four chassis in a standard 42U rack.
Unlike competitive offerings, IBM does not limit you to x86 architectures. Both x86 and POWER-based compute nodes can be mixed into a single chassis. Out of the box, the IBM PureFlex supports four operating systems (AIX, IBM i, Linux and Windows), four server hypervisors (Hyper-V, Linux KVM, PowerVM, and VMware), and two storage hypervisors (SAN Volume Controller and Storwize V7000).
There are a variety of storage options for this. IBM will offer SSD and HDD inside the compute nodes themselves, direct-attached storage nodes, and an integrated version of the Storwize V7000 disk system. Of course, every IBM System Storage product is supported as external storage. Since Storwize V7000 and SAN Volume Controller support external virtualization, many non-IBM devices will be supported automatically as well.
Networking is also optimized, with options for 10Gb and 40Gb Ethernet/FCoE, 40Gb and 56Gb Infiniband, 8Gbps and 16Gbps Fibre Channel. Much of the networking traffic can be handled within the chassis, to minimize traffic on external switches and directors.
For management, IBM offers the Flex System Manager, that allows you to manage all the resources from a single pane of glass. The goal is to greatly simplify the IT lifecycle experience of procurement, installation, deployment and maintenance.
- IBM PureApplication™ System
IBM PureApplication is like PaaS-in-a-box. Based on the IBM PureFlex infrastructure, the IBM PureApplication adds additional software layers focused on transactional web, business logic, and database workloads. Initially, it will offer two platforms: Linux platform based on x86 processors, Linux KVM and Red Hat Enterprise Linux (RHEL); and a UNIX platform based on POWER7 processors, PowerVM and AIX operating system. It will be offered in four tee-shirt sizes (small, medium, large and extra large).
In addition to having IBM's middleware like DB2 and WebSphere optimized for this platform, over 600 companies will announce this week that they will support and participate in the IBM PureSystems ecosystem as well. Already, there are 150 "Patterns of Expertise" ready to deploy from IBM PureSystem Centre, a kind of a "data center app store", borrowing an idea used today with smartphones.
By packaging applications in this manner, workloads can easily shift between private, hybrid and public clouds.
If you are unhappy with the inflexibility of your VCE Vblock, HP Integrity, or Oracle ExaLogic, talk to your local IBM Business Partner or Sales Representative. We might be able to buy your boat anchor off your hands, as part of an IBM PureSystems sale, with an attractive IBM Global Financing plan.
To learn more, check out the [IBM PureSystems] landing page, follow the twitter handle [@IBMPureSystems] or hashtag #ExpertIntSys, watch the videos on the [YouTube channel], or read the [Expert Integrated Systems] blog.
technorati tags: IBM, PureSystems, PureFlex, PureApplication, Flex System Manager, Storwize V7000, Storage Hypervisor, SVC, Pattern of Expertise, DB2, WebSphere, VMware, KVM, Hyper-V, PowerVM, AIX, IBM i, Linux, Windows, HP, Integrity, Oracle, Exalogic, Cisco, UCS, VCE, Vblock
This week I was aboard the Queen Mary in Long Beach, California! This was a business event organized by [Key Info Systems], a valued IBM Business Partner. Key Info resells IBM servers, storage and switches.
The Queen Mary retired in 1967, and has been converted into a hotel and events venue. The locals just parked their car and walked on board, but I got to stay Tuesday through Thursday in one of the cabins. It was long and narrow, with round windows! There were four dials for the bathtub: Cold Salt, Hot Fresh, Cold Fresh, and Hot Salt.
Stepping on the boat was like walking back in time through history! If you decide to go see it, check out the [Art Deco bar at the front of the Promenade deck. The ship is still in the water, but is permanently docked. It is sectioned off to prevent the ocean waves from affecting it, so we did not have the nauseous moving back and forth normally associated with cruise ships.
(It is with a bit of irony that we are on the Queen Mary just days after the tragedy of the [Costa Concordia], the largest Italian cruise ship that ran aground near Isola de Giglio. The captain will have to explain how he [fell into a lifeboat] before he had a chance to wait for everyone else to get safely off the shipwreck. He was certainly no [Captain Sulley]! I am thankful that most of the 4,200 people survived the incident.)
- Executive Welcome
Lief Morin, Founder and Chief Executive for Key Info Systems, kicked off the meeting with highlights of 2011 successes. I have known Lief for years, as Key Info comes to the Tucson EBC on a frequent basis. This event was designed to give his sellers an update of what is the latest for each product line, and what to look forward to in the next 12-18 months.
- Power Systems
My colleague Pat O'Rourke from Austin EBC presented [IBM Power Systems], from the smallest [POWER-based blade servers for BladeCenter] to the largest [Power 795 server]. When it comes to UNIX servers, IBM is [kickin' butt and takin' names], leaving HP and Oracle/Sun to fend for scraps.
- Vision Solutions
The next speaker was from Vision Solutions that provides High Availability solutions for IBM i on Power Systems. In 2010, their company nearly doubled in size with the acquisition of Double-Take, which provides data replication for x86 servers running Windows, Linux, VMware, Hyper-V and other hypervisors. The capabilities of Double-Take sounded similar to what IBM offers with [Tivoli Storage Manager FastBack] and [Tivoli Storage Manager for Virtual Environments].
- Dinner at Sir Winston's
Rather than take the "Ghosts and Legends" tour, I opted for dinner at the Queen Mary's signature restaurant, Sir Winston's. This is a fancy place, so dress accordingly. If you want the Raspberry soufflé, order it early as it takes 30 minutes to prepare!
- System Storage
I presented on a variety of storage topics:
Storage is an important part of the Key Info Systems revenue stream, so I was glad to have lots of questions and interactions from the audience.
- Murder Mystery Dinner
The acting troupe from [Dinner Detective] put on quite the show for us! With all that is going on in the world, it is good to laugh out loud every now and then.
In other murder mystery dinners I have participated in, each person is assigned a "character" and given a script of what to say and when to say it. This was different, we got to pick our own characters. I chose "Doctor Watson", from the Sherlock Holmes series. Several attendees thought it was a double meaning with [IBM Watson], the computer that figured out the clues on Jeopardy! television game show, and has since been [put to work at Wellpoint] to help out the Healthcare industry.
After the "murder" happened, two actors portraying policemen selected members of the audience to answer questions. We didn't get a script of what to say, so everyone had to "ad lib". I was singled out as a suspect, and had fun playing along in character. One of the attendees afterwards said he was impressed that I was able to fabricate such amusing and elaborate responses to their personal and embarassing questions. As a public speaker for IBM, I have had a lot of practice thinking quickly on my feet.
- Fibre Channel and Ethernet Switches
The next two speakers gave us an update on Fibre Channel and Ethernet switches, and their thoughts on the inevitability of Fibre Channel over Ethernet (FCoE). One of the exciting new developments is the [Brocade Network Subscription] which creates a flexible pay-per-use Ethernet port rental model for customers. This is especially timely given the Financial Accounting Standards Board proposed [FASB Change 13] that affects operating leases in the balance sheet.
With the Brocade Network Subscription, you pay monthly for the ports you are using. Need more ports, Brocade will install the added gear. Use fewer ports, Brocade will take the equipment back. There is no term endpoint or residual value like tradtional leasing, so when you are done using the equipment, give it back any time. This is ideal for companies that may need to have a lot of Ethernet ports for the next 2-3 years, but then plan to taper down, and don't want to get stuck with a long-term commitment or capital depreciation.
The last speaker was from VMware. IBM is the #1 reseller of VMware, and VMware commands an impressive 81 percent marketshare in the x86 virtualization space. The speaker presented VMware's strategy going forward, which aligns well with IBM's own strategy, to help companies Cloud-enable their existing IT infrastructures, in preparation for eventual moves to Hybrid or Public cloud deployments.
Special thanks to Lief Morin for sponsoring this event, Raquel Hernandez from IBM for coordinating my travel, and Pete, Christina and Kendrell from Key Info Systems for organizing the activities!
technorati tags: IBM, Queen Mary, Key Info, Art Deco, Costa Concordia, Lief Morin, Pat O'Rourke, Power 795, DS8000, XIV, SONAS, Tape, TS1140, LTFS, Storwize V7000, Unified storage, FCoE, BNS, VMware, Cloud Computing
Continuing my coverage of the annual [2010 System Storage Technical University], I attended some sessions from the System x and Federal track side of this conference.
- Grid, SOA and Cloud Computing
Bill Bauman, IBM System x Field Technical Support Specialist and System x University celebrity, presented the differences between Grid, SOA and Cloud Computing. I thought this was an odd combination to compare and contrast, but his presentation was well attended.
- Grid - this is when two or more independently owned and managed computers are brought together to solve a problem. Some research facilities do this. IBM helped four hospitals connect their computers together into a grid to help analyze breast cancer. IBM also supports the [World Community Grid] which allows your personal computer to be connected to the grid and help process calculations.
- SOA - SOA, which stands for Service Oriented Architecture, is an approach to building business applications as a combination of loosely-coupled black-box components orchestrated to deliver a well-defined level of service by linking together business processes. I often explain SOA as the the business version of Web 2.0. You can download a free copy of the eBook "SOA for Dummies" at the [IBM Smart SOA] landing page.
- Cloud - A Cloud is a dynamic, scalable, expandable, and completely contractible architecture. It may consist of multiple, disparate, on-premise and off-premise hardware and virtualized platforms hosting legacy, fully installed, stateless, or virtualized instances of operating systems and application workloads.
Bill has his own blog, and has an interesting post [Cloud Computing, What it Is, and What it is Not] that appears to be the basis of this presentation.
- Chaos to Cloud
Tom Vezina, IBM Advanced Technical Sales Specialist, presented "Chaos to Cloud Computing". Survey results show that roughly 70 percent of cloud spend will be for private clouds, and 30 percent for public, hybrid or community clouds. Of the key motivations for public cloud, 77 percent or respondents cited reducing costs, 72 percent time to value, and 50 percent improving reliability.
Tom ran over 500 "server utilization" studies for x86 deployments during the past eight years. Of these, the worst was 0.52 percent CPU utilization, the best was 13.4 percent, and the average was 6.8 percent. When IBM mentions that 85 percent of server capacity is idle, it is mostly due to x86 servers. At this rate, it seems easy to put five to 20 guest images onto a machine. However, many companies encounter "VM stall" where they get stuck after only 25 percent of their operating system images virtualized.
He feels the problem is with the fact most Physical-to-Virtual (P2V) migrations are manual efforts. There are tools available like Novell [PlateSpin Recon] to help automate and reduce the total number of hours spent per migration.
- System x KVM Solutions
Boy, I walked into this one. Many of IBM's cloud offerings are based on the Linux hypervisor called Kernel-based Virtual Machine [a href="http://www.linux-kvm.org/page/Main_Page">KVM] instead of VMware or Microsoft Hyper-V. However, this session was about the "other KVM": keyboard video and mouse switches, which thankfully, IBM has renamed to Console Managers to avoid confusion. Presenters Ben Hilmus (IBM) and Steve Hahn (Avocent) presented IBM's line of Local Console Managers (LCM) and Global Console Managers (GCM) products.
LCM are the traditional KVM switches that people are familiar with. A single keyboard, video and mouse can select among hundreds of servers to perform maintenance or check on status. GCM adds KVM-over-IP capabilities, which means that now you can access selected systems over the Ethernet from a laptop or personal computer. Both LCM and GCM allow for two-level tiering, which means that you can have an LCM in each rack, and an LCM or GCM that points to each rack, greatly increasing the number of servers that can be managed from a single pane of glass.
Many severs have a "service processor" to manage the rest of the machine. IBM RSA II, HP iLO, and Dell DRAC4 are some examples. These allow you to turn on and off selected servers. IBM BladeCenter offers an Management Module that allows the chassis to be connected to a Console Manager and select a specific blade server inside. These can also be used with VMware viewer, Virtual Network Computing (VNC), or Remote Desktop Protocol (RDP).
IBM's offerings are unique it that you can have an optical CD/DVD drive or USB external storage attached at the LCM or GCM, and make it look like the storage is attached to the selected server. This can be used to install or upgrade software, transfer log files, and so on. Another great use, and apparently the motivation for having this session in the "Federal Track", is that the USB can be used to attach a reader for a smart card, known as a Common Access Card [CAC] used by various government agencies. This provides two-factor authentication [TFA]. For example, to log into the system, you enter your password (something you know) and swipe your employee badge smart card (something you have). The combination are validated at the selected server to provide access.
I find it amusing that server people limit themselves to server sessions, and storage people to storage sessions. Sometimes, you have to step "outside your comfort zone" and learn something new, something different. Open your eyes and look around a bit. You might just be surprised what you find.
(FTC note: I work for IBM. IBM considers Novell a strategic Linux partner. Novell did not provide me a copy of Platespin Recon, I have no experience using it, and I mention it only in context of the presentation made. IBM resells Avocent solutions, and we use LCM gear in the Tucson Executive Briefing Center.)
technorati tags: IBM, Technical University, Grid, SOA, Cloud Computing, P2V, VMware, Novell, Platespin, x86, KVM, LCM, GCM, Avocent, CAC, TFA
From Timothy Morgan of [The Register
"With Cisco Systems, EMC, and VMware teaming up to sell integrated IT stacks, Oracle buying Sun Microsystems to create its own integrated stacks, and IBM having sold integrated legacy system stacks and rolling in profits from them for decades, it was only a matter of time before other big IT players paired off."
Once again we are reminded that IBM, as an IT "supermarket", is able to deliver integrated software/server/storage solutions, and our competitors are scrambling to form their own alliances to be "more like IBM." This week, IBM announced new ordering options for storage software with System x servers, including BladeCenter blade servers and IntelliStation workstations. Here's a quick recap:
- FastBack v6.1
IBM Tivoli Storage Manager FastBack v6.1 supports both Windows and Linux! FastBack is a data protection solution for ROBO (Remote Office, Branch Office) locations. It can protect Microsoft Exchange, Lotus Domino, DB2, Oracle applications. FastBack can provide full volume-level recovery, as well as individual file recovery, and in some cases Bare Machine Recovery. FastBack v6.1 can be run stand-alone, or integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution.
- FlashCopy Manager v2.1
FlashCopy Manager uses point-in-time copy capabilities, such as SnapShot or FlashCopy, to protect application data using an application-aware approach for Microsoft Exchange, Microsoft SQL server, DB2, Oracle, and SAP. It can be used with IBM SAN Volume Controller (SVC), DS8000 series, DS5000 series, DS4000 series, DS3000 series, and XIV storage systems. When applicable, FlashCopy manager coordinates its work with Microsoft's Volume Shadow Copy Services (VSS) interface. FlashCopy Manager can provide data protection using just point-in-time disk-resident copies, or can be integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution to move backup images to external storage pools, such as low-cost, energy-efficient tape cartridges.
- General Parallel File System (GPFS) v3.3 Multiplatform
GPFS can support AIX, Linux, and Windows! Version 3.3 adds support for Windows 2008 Server on 64-bit chipset architectures from AMD and Intel. Now you can have a common GPFS cluster with AIX, Linux and Windows servers all sharing and accessing the same files. A GPFS cluster can have up to 256 file systems. Each of these file systems can be up to 1 billion files, up to 1PB of data, and can have up to 256 snapshots. GPFS can be used stand-alone, or integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution with parallel backup streams.
For full details on these new ordering options, see the IBM [Press Release].
technorati tags: System x, BladeCenter, IntelliStation, Cisco, EMC, VMware, VCE, Oracle, Sun, HP, Microsoft, FastBack, FlashCopy, GPFS, Windows, Linux, SAP, SVC, VSS, DS8000, DS5000, DS4000, DS3000, SQL, Lotus, Domino
Am I dreaming? On his Storagezilla blog, fellow blogger Mark Twomey (EMC) brags about EMC's standard benchmark results, in his post titled [Love Life. Love CIFS.]. Here is my take:
- A Full 180 degree reversal
For the past several years, EMC bloggers have argued, both in comments on this blog, and on their own blogs, that standard benchmarks are useless and should not be used to influence purchase decisions. While we all agree that "your mileage may vary", I find standard benchmarks are useful as part of an overall approach in comparing and selecting which vendors to work with, and which architectures or solution approaches to adopt, and which products or services to deploy. I am glad to see that EMC has finally joined the rest of the planet on this. I find it funny this reversal sounds a lot like their reversal from "Tape is Dead" to "What? We never said tape was dead!"
- Impressive CIFS Results
The Standard Performance Evaluation Corporation (SPEC) has developed a series of NFS benchmarks, the latest, [SPECsfs2008] added support for CIFS. So, on the CIFS side, EMC's benchmarks compare favorably against previous CIFS tests from other vendors.
On the NFS side, however, EMC is still behind Avere, BlueArc, Exanet, and IBM/NetApp. For example, EMC's combination of Celerra gateways in front of V-Max disk systems resulted in 110,621 OPS with overall response time of 2.32 milliseconds. By comparison, the IBM N series N7900 (tested by NetApp under their own brand, FAS6080) was able to do 120,011 OPS with 1.95 msec response time.
Even though Sun invented the NFS protocol in the early 1980s, they take an EMC-like approach against standard benchmarks to measure it. Last year, fellow blogger Bryan Cantrill (Sun) gives his [Eulogy for a Benchmark]. I was going to make points about this, but fellow blogger Mike Eisler (NetApp) [already took care of it]. We can all learn from this. Companies that don't believe in standard benchmarks can either reverse course (as EMC has done), or continue their downhill decline until they are acquired by someone else.
(My condolences to those at Sun getting laid off. Those of you who hire on with IBM can get re-united with your former StorageTek buddies! Back then, StorageTek people left Sun in droves, knowing that Sun didn't understand the mainframe tape marketplace that StorageTek focused on. Likewise, many question how well Oracle will understand Sun's hardware business in servers and storage.)
- What's in a Protocol?
Both CIFS and NFS have been around for decades, and comparisons can sometimes sound like religious debates. Traditionally, CIFS was used to share files between Windows systems, and NFS for Linux and UNIX platforms. However, Windows can also handle NFS, while Linux and UNIX systems can use CIFS. If you are using a recent level of VMware, you can use either NFS or CIFS as an alternative to Fibre Channel SAN to store your external disk VMDK files.
- The Bigger Picture
There is a significant shift going on from traditional database repositories to unstructured file content. Today, as much as [80 percent of data is unstructured]. Shipments this year are expected to grow 60 percent for file-based storage, and only 15 percent for block-based storage. With the focus on private and public clouds, NAS solutions will be the battleground for 2010.
So, I am glad to see EMC starting to cite standard benchmarks. Hopefully, SPC-1 and SPC-2 benchmarks are forthcoming?
technorati tags: IBM, tape, EMC, Mark+Twomey, Storagezilla, CIFS, NFS, Celerra, V-Max, N7900, VMware, VMDK, Sun, Oracle, StorageTek, tape, benchmarks, SPEC, SPECsfs, SPECsfs2008, SPC, SPC-1, SPC-2, NetApp, FAS6080
"Politics makes strange bedfellows."
--- Charles Dudley Warner
In my September 2007 post [Supermarkets and Specialty Shops], I explain that there are two kinds of clients:
- Those that prefer to work with one-stop shopping of an IT Supermarket, with companies like IBM, HP and Dell who offer a complete set of servers, storage, switches, software and services, what we call "The Five S's".
- Those that perfer shopping for components at individual specialty shops, like butchers, bakers, and candlestick makers, hoping that this singular focus means the products are best-of-breed in the market. Companies like HDS for disk, Quantum for tape, and Symantec for software come to mind.
My how the IT landscape for vendors has evolved in just the past five years! Cisco starts to sell servers, and enters a "mini-mall" alliance with EMC and VMware to offer vBlock integrated stack of server, storage and switches with VMware as the software hypervisor. For those not familiar with the concept of mini-malls, these are typically rows of specialty shops. A shopper can park their car once, and do all their shopping from the various shops in the mini-mall. Not quite "one-stop" shopping of a supermarket, but tries to address the same need.
("Who do I call when it breaks?" -- The three companies formed a puppet company, the Virtual Computing Environment company, or VCE, to help answer that question!)
Among the many things IBM has learned in its 100+ years of experience, it is that clients want choices. Cisco figured this out also, and partnered with NetApp to offer the aptly-named FlexPod reference architecture. In effect, Cisco has two boyfriends, when she is with EMC, it is called a Vblock, and when she is with NetApp, it is called a FlexPod. I was lucky enough to find this graphic to help explain the three-way love triangle.
Did this move put a strain on the relationship between Cisco and EMC? Last month, EMC announced VSPEX, a FlexPod-like approach that provides a choice of servers, and some leeway for resellers to make choices to fit client needs better. Why limit yourself to Cisco servers, when IBM and HP servers are better? Is this an admission that Vblock has failed, and that VSPEX is the new way of doing things? No, I suspect it is just EMC's way to strike back at both Cisco and NetApp in what many are calling the "Stack Wars". (See [The Stack Wars have Begun!], [What is the Enterprise Stack?], or [The Fight for the Fully Virtualized Data Center] for more on this.)
(FTC Disclosure: I am both an employee and shareholder of IBM, so the U.S. Federal Trade Commission may consider this post a paid, celebrity endorsement of the IBM PureFlex system. IBM has working relationships with Cisco, NetApp, and Quantum. I was not paid to mention, nor have I any financial interest in, any of the other companies mentioned in this blog post. )
Chris Mellor and Timothy Prickett Morgan at The Register have a great series of posts exploring this new development: [EMC VSPEX storage torpedo could sink FlexPods], [El Reg hurls EMC onto the rack, drills into VSPEX], [We were right: EMC's VSPEX will take on FlexPods], and [How EMC stuffs channel cakeholes with VSPEX recipes].
Last month, IBM announced its new PureSystems family, ushering in a [new era in computing]. I invite you all to check out the many "Paterns of Expertise" available at the [IBM PureSystems Centre]. This is like an "app store" for the data center, and what I feel truly differentiates IBM's offerings from the rest.
The trend is obvious. Clients who previously purchased from specialty shops are discovering the cost and complexity of building workable systems from piece-parts from separate vendors has proven expensive and challenging. IBM PureFlex™ systems eliminate a lot of the complexity and effort, but still offer plenty of flexibility, choice of server processor types, choice of server and storage hypervisors, and choice of various operating systems.
technorati tags: IBM, Stack Wars, PureSystems, PureFlex, VSPEX, EMC, Vblock, Cisco, VMware, NetApp, FlexPod, HDS, Quantum, Symantec
Next week is [VMworld 2010], so I thought today would be a good day to write a blog post about reporting and managing virtual guest images.
As the original lead architect for IBM Tivoli Storage Productivity Center, I am no stranger to reporting and management tools. Needless to say, if you have lots of virtual guest images, it makes sense to deploy reporting and management software. I had never heard of Veeam before, but I decided to check out Veeam Reporter 4.0, an enterprise-level reporting solution specifically designed for large Virtual Infrastructure (VI3) and vSphere virtual environments that allows you to automatically discover and collect information about your VMware virtual environment.
Their 90-page User Guide offered these helpful "First Steps" on page 9 which I used as the master plan for my evaluation.
- Install Veeam Reporter 4.0
The instructions appeared fairly straightforward: Download [the latest version] of the application. Unpack the downloaded archive and run the VeeamReporter.exe file. Then follow the installation wizard steps. What could go wrong?
I should have known better. Like IBM Tivoli Storage Productivity Center, Veeam Reporter is designed to be installed on its own server-class machine with its own application web server and database. I wasn't going to stand up a new server in our lab just for this contest, so I decided to just install it on my Windows XP SP3, which Veeam had listed as a supported operating system level. I ran into a series of installation issues, including installing IIS, installing SQL server, and installing the SRSS component. I am more familiar with IBM's WebSphere Application Server and DB2 combination used in IBM's own products, and have experience with Apache and MySQL on a standard LAMP stack, so my lack of experience with IIS and SQL server made the installation more difficult. Many thanks to all the support personnel at Veeam, Microsoft, and my internal IT department to finally get all of this working.
It appears you can set this up as a client/server environment, where the Veeam Reporter server runs IIS and SQL Server, and then you have a browser on your client machine point to that server. In my cases, I have client browser and server all on one machine.
- Create and run a collection job
This step also seemed fairly standard for reporting tools. Once you launch Veeam Reporter 4.0 for the first time, you need to retrieve data from your virtual infrastructure to be able to generate reports. To start the created collection job, select it and click the Start button on the toolbar. If you have a vCenter server in your VI environment, we recommend that you create a job for it to immediately collect data for all objects in its hierarchy. After that, you will be able to select VI objects that were engaged in the performed job using the Workspace, and generate reports for it.
I signed up for this contest August 7, but step 1 above took me two weeks to resolve all the installation iissues. I wanted to get my blog post entry for the contest BEFORE the start of VMworld. Since I am in Dallas, Texas this week for the IBM Storage Solutions University, I had to go through several firewalls for my laptop to tunnel through and get to my VMware Center back in Tucson.
Click on the graphic above to see larger view.
I was able to create and run a collection job. I have a WMware ESX 3.5 host running five guest images and 14 datastores. This seemed to be enough to evaluate the basic features of this reporting tool. Veeam Reporter let's you run the collection process manually, or set a "periodic" schedule to collect data every hour.
- Generate reports manually or create a reporting job
Finally, I get to the fun part: To generate report manually, click the Workspace tab, select a necessary VI object from the tree view, date and collection job session, choose reports and click the Create Report button.
At this point, I am reminded of a famous poem:
To see a world in a grain of sand
And a heaven in a wild flower,
Hold infinity in the palm of your hand
And eternity in an hour.
- William Blake
When evaluating products, try to imagine what the reports would look like with hundreds of virtual guest images. Certainly, I can see some potential, even though I had rather limited data to work with. In theory, the tool can create Visio output files, but you need to have Microsoft Visio installed. I have only "Visio Viewer" so I was unable to create any visio files with this product.
The reports can be exported to PDF, Word or Excel formats. Here is an example of an Excel spreadsheet export. While it has 14 bars for the 14 datastores, there are no labels, and the misleading details link in the lower right corner is non-functional. The only way for me to figure out what each referred to was to go back to my vCenter client, which kind of defeats the purpose of having a separate reporting tool.
This same report exported to PDF spanned across four pages, leaving the re-assembly to be done with a pair of scissors and celophane tape.
When you create reports, you can use SRSS or Veeam's internal proprietary format. Only SRSS reports can be put on the dashboard, so I recommend that.
- Customize your dashboard
The fourth and final step is to configure your own dashboard: To add reports to the Dashboard, you should first create and save them using Workspace of Veeam Reporter 4.0. Keep in mind that you can add to the Dashboard only saved SSRS-based reports. To customize the Dashboard, click the Dashboard tab and then click the Edit Dashboard button. Customize the layout by dragging blue borders from the right and the bottom of the screen. Then, drag reports from the Reports list and drop them onto the created cells.
The "Free Edition" only allows you to put a single report on the dashboard, so as in step 3, you have to use your imagination of what the potential of the full license would looke like with multiple reports are on a single pane of glass.
(FTC Disclosure: I work for IBM, the leader in server virtualization worldwide, and the number #1 reseller of VMware. In this post, I review [Veeam Reporter 4.0] as my official entry for their blogging contest. IBM and Veeam do not have any business relationshiop that I know of, other than both being VMware business partners, so I am treating them here as an Independent Software Vendor (ISV). Veeam has not compensated me in any manner for this review, this review is not to be taken as an endorsement of Veeam or its products, and I was not provided any full or evaluator license keys. The review is based entirely on my experience using the "Free Edition" available to all for download. None of this blog post was pre-reviewed by anyone from Veeam. IBM, of course, also offers similar software, which I mention below for comparison purposes.)
At this point, you might be thinking, "Doesn't IBM offer something like this?" Of course it does! IBM is the leader in infrastructure reporting, monitoring and management software. Last October, [IBM unveiled IBM Systems Director VMcontrol] software. Not only does IBM Systems Director VMcontrol provide similar support for your VMware environment, it also manages Microsoft Hyper-V and Xen deployments, PowerVM on POWER-based serves, and even z/VM guest images on the System z mainframes. Combined with the rest of the IBM Systems Director, you can manage all of your physical and virtual servers with a single tool from a single pane of glass. How cool is that?
IBM VMcontrol comes in [three levels]:
- [Express Edition] offers the easiest way to manage virtual machines
- [Standard Edition] adds the ability to manage complete libraries of virtual images
- [Enterprise Edition] creates and enables the management of system pools – dynamic collections of computing resources used to support multiple virtual images running concurrently
To learn more, see the [VMcontrol Implementation Guide], take it for a test drive, with a [trial download], or talk to one of the many IBMers at [VMworld 2010] in San Francisco, August 30-September 2.
I would like to think Doug Hazelman, Senior Director of Product Strategy at Veeam, for organizing this awesome blogging contest. If you liked this blog post, click here to [vote for me] to get counted for this contest.
technorati tags: IBM, VMcontrol, Veeam, Reporter, VMware, Hyper-V, Xen, PowerVM, zVM, VMworld
The marketshare data for external disk systems has been released by IDC for 4Q09. Overall, the market dropped 0.7 percent, comparing 4Q09 versus 4Q08. While EMC was quick to remind everyone that they were able to [maintain their #1 position] in the storage subset of "external disk systems", with the same 23.7 percent marketshare they had back in 4Q08 and revenues that were essentially flat, the real story concerns the shifts in the marketplace for the other major players. IBM grew revenue 9 percent, putting it nearly 5 points of marketshare ahead of HP. HP revenues dropped 7 percent, moving it further behind. Not mentioned in the [IBM Press Release] were NetApp and Dell, neck and neck for fourth place, with NetApp gaining 16.8 percent in revenues, while Dell dropped 13.5 percent. Both NetApp and Dell now have about 8 percent marketshare each. These top five storage vendors represent nearly 70 percent of the marketshare.
Given that HP is IBM's number one competitor, not just in storage but all things IT, this was a major win. Bob Evans from InformationWeek interviews my fifth-line manager, IBM executive Rod Adkins [IBM Claims Hardware Supremacy] where he shares his views and opinions about HP, Oracle-Sun, Cisco and Dell.
I'll add my two cents on what's going on:
- Shift in Servers causes Shift in Storage
Hundreds of customers are moving away from HP and Sun over to IBM servers, and with it, are chosing IBM's storage offerings as well. IBM's rock-solid strategy (which I outlined in my post [Foundations and Flavorings]) has helped explain the different products and how they are positioned. HP's use of Itanium processors, and Sun's aging SPARC line, are both reasons enough to switch to IBM's lastest POWER7 processors, running AIX, IBM i (formerly i5/OS) and Linux operating systems.
- Thunder in the Clouds
Some analysts predict that by 2013, one out of five companies won't even have their own IT assets. IBM supports all flavors of private, public and hybrid cloud computing models. IBM has its own strong set of offerings, is also the number one reseller of VMware, and has cloud partnerships with both Google and Amazon. HP and Microsoft have recently formed an alliance, but they have different takes on cloud computing. HP wants to be the "infrastructure" company, but Microsoft wants to focus on its ["three screens and a public cloud"] strategy. Microsoft has decided not to make its Azure Cloud operating system available for private cloud deployments. By contrast, IBM can start you with a private cloud, then help you transition to a hybrid cloud, and finally to a public cloud.
In the latest eX5 announcement, IBM's x86-based servers can run 78 percent more virtual machines per VMware license dollar. This will give IBM an advantage as HP shifts from Itanium to an all x86-based server line.
- Network Attached Storage
There seems to be a shift away from FC and iSCSI towards NAS and FCoE storage networking protocols. This bodes bad for HP's acquisition of LeftHand, and Dell's acquisition of EqualLogic. IBM's SONAS for large deployments, and N series for smaller deployments, will compete nicely against HP's StorageWorks X9000 system.
- Storage on Paper no longer Eco-friendly
HP beats IBM when you include consumer products like printers, which some might consider "Storage on Paper". At IBM, we often joke that 96 percent of HP's profits come from over-priced ink cartridges. With the latest focus on the environment, people are printing less. I have been printing less myself, setting my default printer to generate a PDF file instead. There are several tools available for this, including [CutePDF] and [BullZip]. As IBM employees switch from Microsoft Office to IBM's [Lotus Symphony], it has built-in "export-to-PDF" capability as well. People are also going to their local OfficeMax or CartridgeWorld to get their cartridges refilled, rather than purchase new ones. That has to be hurting HP's bottom line.
- Don't Forget About Storage Management
The leading storage management suites today are IBM's Tivoli Storage Productivity Center and EMC's Control Center. HP's Storage Essentials doesn't quite beat either of these, and management software is growing in importance to more and more customers.
To learn more about IBM results 4Q09 and full-year 2009, see [Quarterly Earnings].
technorati tags: IBM, EMC, IDC, HP, NetApp, Dell, SPARC, Itanium, POWER7, cloud computing, three screens and cloud, VMware, FC, iSCSI, NAS, FCoE, Microsoft, printers, Productivity Center, LeftHand, EqualLogic, PDF, CutePDF, BullZip, 4Q09
It seems everyone is talking about stacks, appliances and clouds.
On StorageBod, fellow blogger Martin Glassborow has a post titled [Pancakes!] He feels that everyone from Hitachi to Oracle is turning into the IT equivalent of the International House of Pancakes [IHOP] offering integrated stacks of software, servers and storage.
Cisco introduced its "Unified Computing System" about a year ago, [reinventing the datacenter with an all-Ethernet approach]. Cisco does not offer its own hypervisor software nor storage, so there are two choices. First, Cisco has entered a joint venture, called Acadia, with VMware and EMC, to form the Virtual Computing Environment (VCE) coalition. The resulting stack was named Vblock, which one blogger had hyphenated as Vb-lock to raise awareness to the proprietary vendor lock-in nature of this stack. Second, Cisco, VMware and NetApp had a similar set of [Barney press releases] to announce a viable storage alternative to those not married to EMC.
On StorageMojo, fellow blogger Robin Harris presents [A deep dive into Cisco’s UCS]. Here is an excerpt:
"Only when it makes sense. Oracle/Sun has the better argument: when you know exactly what you want from your database, we’ll sell you an integrated appliance that will do exactly that. And it’s fine if you roll your own.
But those are industry-wide issues. There are UCS/VCE specific issue as well:
- Cost. All the integration work among 3 different companies costs money. They aren’t replacing existing costs – they are adding costs. Without, in theory, charging more.
- Lock-in. UCS/Vblock is, effectively, a mainframe with a network backplane.
- Barriers to entry. Are there any? Cisco flagged hypervisor bypass and large memory support as unique value-add – and neither seems any more than a medium-term advantage.
- BOT? Build, Operate, Transfer. In theory Vblocks are easier and faster to install and manage. But customers are asking that Acadia BOT their new Vblocks. The customer benefit over current integrator practice? Lower BOT costs? Or?
- Price. The 3 most expensive IT vendors banding together?
- Longevity. Industry “partnerships” don’t have a good record of long-term success. Each of these companies has its own competitive stresses and financial imperatives, and while the stars may be aligned today, where will they be in 3 years? Unless Cisco is piloting an eventual takeover."
Similar questions and concerns were raised by others, including Greg Ferro's [Questions I Have About Cisco] and Gestalt IT's [One Year Later: Questioning Cisco UCS].
Fellow blogger Bob Sutor (IBM) has an excellent post titled
[Appliances and Linux
]. Here is an excerpt:
"In your kitchen you have special appliances that, presumably, do individual things well. Your refrigerator keeps things cold, your oven makes them hot, and your blender purees and liquifies them. There is room in a kitchen for each of these. They work individually but when you are making a meal they each have a role to play in creating the whole.
You could go out and buy the metal, glass, wires, electrical gadgets, and so on that you would need to make each appliance but it is is faster, cheaper, and undoubtably safer to buy them already manufactured. For each device you have a choice of providers and you can pay more for additional features and quality.
In the IT world it is far more common to buy the bits and pieces that make up a final solution. That is, you might separately order the hardware components, the operating system, and the applications, and then have someone put them all together for you. If you have an existing configuration you might add more blades or more storage devices.
You don’t have to do this, however, in every situation. Just from a hardware perspective, you can buy a ready-made machine just waiting for the on switch to be flicked and the software installed. Conversely, you might get a pre-made software image with operating system and applications in place, ready to be provisioned to your choice of hardware. We can get even fancier in that the software image might be deployable onto a virtual machine and so be a ready made solution runnable on a cloud.
Thus in the IT world we can talk about hardware-only appliances, software-only appliances (often called virtual software appliances), and complete hardware and software combinations. The last is most comparable to that refrigerator or oven in your kitchen."
If your company was a restaurant, how many employees would you have on hand to produce your own electricity from gas generators, pump your own water from a well, and assemble your own toasters and blenders from wires and motors? I think this is why companies are re-thinking the way they do their own IT.
Rather than business-as-usual, perhaps a mix of pre-configured appliances, consisting of software, server and storage stacked to meet a specific workload, connected to public cloud utility companies, might be the better approach. By 2013, some analysts feel that as many as 20 percent of companies might not even have a traditional IT datacenter anymore.
Fellow blogger David Salgado (Microsoft) rips into the IT industry for [marketing these "stacks" of components as "private clouds"]. Fellow blogger Mary-Jo Foley (Microsoft) asks ['Private cloud' = just another buzzword for on-premise datacenter?"] adds more attention to the confusion over the terms private and public cloud. Here's an excerpt that shows Microsoft's thinking in this area:
- "The private cloud:
- “By employing techniques like virtualization, automated management, and utility-billing models, IT managers can evolve the internal datacenter into a ‘private cloud’ that offers many of the performance, scalability, and cost-saving benefits associated with public clouds. Microsoft provides the foundation for private clouds with infrastructure solutions to match a range of customer sizes, needs and geographies.
- The public cloud:
- “Cloud computing is expanding the traditional web-hosting model to a point where enterprises are able to off-load commodity applications to third-party service providers (hosters) and, in the near future, the Microsoft Azure Services Platform. Using Microsoft infrastructure software and Web-based applications, the public cloud allows companies to move applications between private and public clouds.”
Finally, I saw this from fellow blogger, Barry Burke(EMC), aka the Storage Anarchist, titled [a walk through the clouds] which is really a two-part post.
The first part describes a possible future for EMC customers written by EMC employee David Meiri, envisioning a wonderful world with "No more Metas, Hypers, BIN Files...."
The vision is a pleasant one, and not far from reality. While EMC prefers to use the term "private cloud" to refer to both on-premises and off-premises-but-only-your-employees-can-VPN-to-it-and-your-IT-staff-still-manages-it flavors, the overall vision is available today from a variety of Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS) providers.
A good analogy for "private cloud" might be a corporate "intranet" that is accessible only within the company's firewall. This allowed internal websites where information to be disseminated to employees could be posted, using standard HTML and standard web browsers that are already deployed on most PCs and workstations. Web pages running on an intranet can easily be moved to an external-facing website without too much rework or trouble.
The second part has Barry claiming that EMC has made progress towards a "Virtual Storage Server" that might be announced at next month's EMC World conference.
When people hear "Storage Virtualization" most immediately think of the two market leaders, IBM SAN Volume Controller and Hitachi Data Systems (HDS) Universal Storage Platform (USP) products. Those with a tape bent might throw in IBM's TS7000 virtual tape libraries or Oracle/Sun's Virtual Storage Manager (VSM). And those focused on software-only solutions might recall Symantec's Veritas Volume Manager (VxVM), DataCore's SANsymphony, or FalconStor's IPStor products.
But what about EMC's failed attempt at storage virtualization, the Invista? After five years of failing to deliver value, EMC has so far only publicised ONE customer reference account, and I estimate that perhaps only a few dozen actual customers are still running on this platform. Compare that to IBM selling tens of thousands of SAN Volume Controllers, and HDS selling thousands of their various USP-V and USP-VM products, and you quickly realize that EMC has a lot of catching up to do. EMC's first delivered Invista about 18 months after IBM SAN Volume Controller, similar to their introduction of Atmos being 18 months after our Scale-Out File Services (SoFS) and their latest CLARiiON-based V-Max coming out 18 months after IBM's XIV storage system.
So what will EMC's Invista follow-on "Virtual Storage Server" product look like? No idea. It might be another five years before you actually hear about a customer using it. But why wait for EMC to get their act together?
IBM offers solutions TODAY that can make life as easy as envisioned here. IBM offers integrated systems sold as ready-to-use appliances, customized "stacks" that can be built to handle particular workloads, residing on-premises or hosted at an IBM facility, and public cloud "as-a-service" offerings on the IBM Cloud.
technorati tags: StorageBod, Martin Glassborow, IHOP, Hitachi, Oracle, Cisco, UCS, Ethernet, VMware, VCE, NetApp, Barney, StorageMojo, Robin Harris, IBM, Bob Sutor, Linux, Appliances, Stacks, Private Cloud, Public Cloud, Cloud Computing, IaaS, PaaS, SaaS, Barry Burke, EMC, Invista
First day of the [IBM System Storage Technical University 2011] continued with more keynote sessions.
- Jim Rymarczyk
Jim is an IBM Fellow for IBM Systems and Technology Group. There are only 73 IBM Fellows currently working for IBM, and this is the highest honor IBM can bestow on an employee. He has been working with IBM since 1968.
He is tasked with predicting the future of IT, and help drive strategic direction for IBM. Cost pressures, requirements for growth, accelerating innovation and changing business needs help influence this direction.
IBM's approach is to integrate four different "IT building blocks":
- Scale-up Systems, like the IBM System Storage DS8000 and TS3500 Tape Library
- Resource Pools, such as IBM Storage Pools formed from managed disks by IBM SAN Volume Controller (SVC)
- Integrated stacks and appliances, integrated software and hardware stacks, from Storwize V7000 to full rack systems like IBM Smart Analytics Server or CloudBurst.
- Clouds, such as IBM's [Smart Cloud Enterprise]
Mobility of workloads and resources requires unified end-to-end service management. Fortunately, IBM is the #1 leader in IT Service Management solutions.
Jim addressed three myths:
- Myth 1: IT Infrastructures will be homogenous.
Jim feels that innovations are happening too rapidly for this to ever happen, and is not a desirable end-goal. Instead, a focus to find the right balance of the IT building blocks might be a better approach.
- Myth 2: All of your problems can be solved by replacing everything with product X.
Jim feels that the days of "rip-and-replace" are fading away. As IBM Executive Steve Mills said, "It isn't about the next new thing, but how well new things integrate with established applications and processes."
- Myth 3: All IT will move to the Cloud model.
Jim feels a substantial portion of IT will move to the Cloud, but not all of it. There will always be exceptions where the old traditional ways of doing things might be appropriate. Clouds are just one of the many building blocks to choose from.
Jim's focus lately has been finding new ways to take advantage of virtualization concepts. Server, storage and network virtualization are helping address these challenges through four key methods:
- Sharing - virtualization that allows a single resource to be used by multiple users. For example, hypervisors allow several guest VM operating systems share common hardware on a single physical server.
- Aggregation - virtualization that allows multiple resources to be managed as a single pool. For example, SAN Volume Controller can virtualize the storage of multiple disk arrays and create a single storage pool.
- Emulation - virtualization that allows one set of resources to look and feel like a different set of resources. Some hypervisors can emulate different kinds of CPU processors, for example.
- Insulation - virtualization that hides the complexity from the end-user application or other higher levels of infrastructure, making it easier to make changes of the underlying managed resources. For example, both SONAS and SAN Volume Controller allow disk capacity to be removed and replaced without disruption to the application.
In today's economy, IT transformation costs must be low enough to yield near-term benefits. The long-term benefits are real, but near-term benefits are needed for projects to get started.
What set's IBM ahead of the pack? Here was Jim's list:
- 100 Years of Innovation, including being the U.S. Patent leader for the last 18 years in a row
- IBM's huge investment in IBM Research, with labs all over the globe
- Leadership products in a broad portfolio
- Workload-optimized designs with integration from middleware all the way down to underlying hardware
- Comprehensive management software for IBM and non-IBM equipment
- Clod Barrera
Clod is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. His presentation focused on trends and directions in the IT storage industry. Clod started with five workload categories:
- Data Analytics
- Business Logic/Apps
To address these unique workload categories, IBM will offer workload-optimized systems. The four drivers on the design for these are performance, efficiency, scalability, and integration. For example, to address performance, companies can adopt Solid-State Drives (SSD). Unfortunately, these are 20 times more expensive dollar-per-GB than spinning disk, and the complexity involved in deciding what data to place on SSD was daunting. IBM solved this with an elegant solution called IBM System Storage Easy Tier, which provides automated data tiering for IBM DS8000, SAN Volume Controller (SVC) and Storwize V7000.
For scalability, IBM has adopted Scale-Out architectures, as seen in the XIV, SVC, and SONAS. SONAS is based on the highly scalable IBM General Parallel File System (GPFS). File systems are like wine, they get better with age. GPFS was introduced 15 years ago, and is more mature than many of the other "scalable file systems" from our competition.
Areal Density advancements on Hard Disk Drives (HDD) are slowing down. During the 1990s, the IT industry enjoyed 60 to 100 percent annual improvement in areal density (bits per square inch). In the 2000s, this dropped to 25 to 40 percent, as engineers are starting to hit various physical limitations.
Storage Efficiency features like compression have been around for a while, but are being deployed in new ways. For example, IBM invented WAN compression needed for Mainframe HASP. WAN compression became industry standard. Then IBM introduced compression on tape, and now compression on tape is an industry standard. ProtecTIER and Information Archive are able to combine compression with data deduplication to store backups and archive copies. Lastly, IBM now offers compression on primary data, through the IBM Real-Time Compression appliance.
For the rest of this decade, IBM predicts that tape will continue to enjoy (at least) 10 times lower dollar-per-GB than the least expensive spinning disk. Disk and Tape share common technologies, so all of the R&D investment for these products apply to both types of storage media.
For integration, IBM is leading the effort to help companies converge their SAN and LAN networks. By 2015, Clod predicts that there will be more FCoE purchased than FCP. IBM is also driving integration between hypervisors and storage virtualization. For example, IBM already supports VMware API for Array Integration (VAAI) in various storage products, including XIV, SVC and Storwize V7000.
Lastly, Clod could not finish a presentation without mentioning Cloud Computing. Cloud storage is expected to grow 32 percent CAGR from year 2010 to 2015. Roughly 10 percent of all servers and storage will be in some type of cloud by 2015.
As is often the case, I am torn between getting short posts out in a timely manner versus spending some more time to improve the length and quality of information, but posted much later. I will spread out the blog posts in consumable amounts throughout the next week or two, to achieve this balance.
technorati tags: IBM, Jim Rymarczyk, Clod Barrera, Storage University, Scale-Up, DS8000, TS3500, Cloud, Middleware, Scale-Out, XIV, SVC, SONAS, GPFS, HDD, SSD, VAAI, VMware, SAN, LAN, convergence, FCoE
Continuing my coverage of the [Data Center 2010 conference], Tuesday afternoon I presented "Choosing the Right Storage for your Server Virtualization". In 2008 and 2009, I attended this conference as a blogger only, but this time I was also a presenter.
The conference asked vendors to condense their presentations down to 20 minutes. I am sure this was inspired by the popular 18-minute lectures from the [TED conference] or perhaps the [Pecha Kucha] night gatherings in Japan where each presenter speaks while showing 20 slides for 20 seconds each, This forces the presenters to focus on their key points and not fill the time slot with unnecessary marketing fluff. This also allows more vendors to have a chance to pitch their point of view.
Here are my charts on SlideShare.net:
I am thankful I had a great turn-out, with nearly every seat taken.
technorati tags: IBM, Storwize V7000, VMware, Hyper-V, PowerVM, zLPAR, Xen, OracleVM, Citrix, KVM, Redhat, RHEV, SVC, TED.com, Pecha Kucha
Over on the Tivoli Storage Blog, there is an exchange over the concept of a "Storage Hypervisor". This started with fellow IBMer Ron Riffe's blog post [Enabling Private IT for Storage Cloud -- Part I], with a promise to provide parts 2 and 3 in the next few weeks. Here's an excerpt:
"Storage resources are virtualized. Do you remember back when applications ran on machines that really were physical servers (all that “physical” stuff that kept everything in one place and slowed all your processes down)? Most folks are rapidly putting those days behind them.
In August, Gartner published a paper [Use Heterogeneous Storage Virtualization as a Bridge to the Cloud] that observed “Heterogeneous storage virtualization devices can consolidate a diverse storage infrastructure around a common access, management and provisioning point, and offer a bridge from traditional storage infrastructures to a private cloud storage environment” (there’s that “cloud” language). So, if I’m going to use a storage hypervisor as a first step toward cloud enabling my private storage environment, what differences should I expect? (good question, we get that one all the time!)
The basic idea behind hypervisors (server or storage) is that they allow you to gather up physical resources into a pool, and then consume virtual slices of that pool until it’s all gone (this is how you get the really high utilization). The kicker comes from being able to non-disruptively move those slices around. In the case of a storage hypervisor, you can move a slice (or virtual volume) from tier to tier, from vendor to vendor, and now, from site to site all while the applications are online and accessing the data. This opens up all kinds of use cases that have been described as “cloud”. One of the coolest is inter-site application migration.
A good storage hypervisor helps you be smart.
Application owners come to you for storage capacity because you’re responsible for the storage at your company. In the old days, if they requested 500GB of capacity, you allocated 500GB off of some tier-1 physical array – and there it sat. But then you discovered storage hypervisors! Now you tell that application owner he has 500GB of capacity… What he really has is a 500GB virtual volume that is thin provisioned, compressed, and backed by lower-tier disks. When he has a few data blocks that get really hot, the storage hypervisor dynamically moves just those blocks to higher tier storage like SSD’s. His virtual disk can be accessed anywhere across vendors, tiers and even datacenters. And in the background you have changed the vendor storage he is actually sitting on twice because you found a better supplier. But he doesn’t know any of this because he only sees the 500GB virtual volume you gave him. It’s 'in the cloud'."
Then another IBM blogger, Richard Vining, continued this meme with his post [VMware Data Protection with a Storage Hypervisor
]. There are [different meanings for the word "protect"
], but Richard's usage relates to protecting against unexpected loss. Here's an excerpt:
"Let’s start with a quick walk down memory lane. Do you remember what your data protection environment looked like before virtualization? There was a server with an operating system and an application… and that thing had a backup agent on it to capture backup copies and send them someplace (most likely over an IP network) for safe keeping. It worked, but it took a lot of time to deploy and maintain all the agents, a lot of bandwidth to transmit the data, and a lot of disk or tapes to store it all. The topic of data protection has modernized quite a bit since then.
Fast forward to today. Modernization has come from three different sources – the server hypervisor, the storage hypervisor and the unified recovery manager. The end result is a data protection environment that captures all the data it needs in one coordinated snapshot action, efficiently stores those snapshots, and provides for recovery of just about any slice of data you could want. It’s quite the beautiful thing."
At this point, you might scratch your head and ask "Does this Storage Hypervisor exist, or is this just a theoretical exercise?" The answer of course is "Yes, it does exist!" Just like VMware offers vSphere and vCenter, IBM offers block-level disk virtualization through the SAN Volume Controller(SVC) and Storwize V7000 products, with a full management support from Tivoli Storage Productivity Center Standard Edition.
SVC has supported every release of VMware since the 2.5 version. IBM is the leading reseller of VMware, so it makes sense for IBM and VMware development to collaborate and make sure all the products run smoothly together. SVC presents volumes that can be formatted for VMFS file system to hold your VMDK files, accessible via FCP protocol. IBM and VMware have some key synergies:
- Management integration with Tivoli Storage Productivity Center and VMware vCenter plug-in
- VAAI support: Hardware-assisted locking, hardware-assisted zeroing, and hardware-assisted copying. Some of the competitors, like EMC VPLEX, don't have this!
- Space-efficient FlashCopy. Let's say you need 250 VM images, all running a particular level of Windows. A boot volume of 20GB each would consume 5000GB (5 TB) of capacity. Instead, create a Golden Master volume. Then, take 249 copies with space-efficient FlashCopy, which only consumes space for the modified portions of the new volumes. For each copy, make the necessary changes like unique hostname and IP address, changing only a few blocks of data each. The end result? 250 unique VM boot volumes in less than 25GB of space, a 200:1 reduction!
- Support for VMware's Site Recovery Manager using SVC's Metro Mirror or Global Mirror features for remote-distance replication.
- Data center federation. SVC allows you to seamlessly do vMotion from one datacenter to another using its "stretched cluster" capability. Basically, SVC makes a single image of the volume available to both locations, and stores two physical copies, one in each location. You can lose either datacenter and still have uninterrupted access to your data. VMware's HA or Fault Tolerance features can kick in, same as usual.
But unlike tools that work only with VMware, IBM's storage hypervisor works with a variety of server virtualization technologies, including Microsoft Hyper-V, Xen, OracleVM, Linux KVM, PowerVM, z/VM and PR/SM. This is important, as a recent poll on the Hot Aisle blog indicates that [44 percent run 2 or more server hypervisors]!
For a set of best practices combining VMware with SVC, check out this IBM Redpaper titled [VMware Proof of Practice and Performance Guidelines on the SAN Volume Controller].
Join the conversation! The virtual dialogue on this topic will continue in a [live group chat] this Friday, September 23, 2011 from 12 noon to 1pm EDT. Join me and about 20 other top storage bloggers, key industry analysts and IBM Storage subject matter experts to discuss storage hypervisors and get questions answered about improving your private storage environment.
technorati tags: IBM, Ron Riffe, Richard Vining, Storage Hypervisor, Cloud, Heterogeneous, Virtualization, SVC, Tivoli Storage, Productivity Center, TPC, VMware, vSphere, vCenter, ESX, Unified Recovery, Data Protection, EMC, VPLEX
They say "Great Minds think alike" and that imitation is "the sincerest form of flattery." Both of these quotes came to mind when I read fellow blogger Chuck Hollis' (EMC) excellent April 7th blog post [The 10 Big Ideas That Are Shaping IT Infrastructure Today]. Not surprisingly, some of his thoughts are similar to those I had presented two weeks ago in my March 22nd post [Cloud Computing for Accountants]. Here are two charts that caught my eye:
- Telephone Operators
On page 13 of my deck, I had an old black and white photo of telephone operators, as part of a section on the history of selecting "cloud" as the iconic graphic to represent all networks. Chuck has this same graphic on his chart titled "#1 The Industrialization of IT Infrastructure".
Looks like Chuck and I use the same "stock photo" search facility!
- Arms Dealers
On page 45 on my deck, I had a list of major "arms dealers" that deliver the hardware and software components needed to build Cloud Computing. Chuck has a similar chart, titled "#2 The Consolidation of the IT Industry", but with some interesting differences.
Let's look at some of the key differences:
- The left-to-right order is slightly different. I chose a 1-2-4-2-1 symmetrical pattern purely on aesthetic reasons. My presentation was to a bunch of accountants, and so I was trying not to make it sound like an "Infomercial" for IBM products and offerings. My sequence is roughly chronological, in that Oracle announced its intention to acquire Sun, then Cisco, VMware and EMC announced their VCE coalition, followed closely by Cisco, VMware and NetApp announcing they work together well also, followed by [HP extended alliance with Microsoft] on Jan 13, 2010. As the IT marketplace is maturing, more and more customers are looking for an IBM-like one-stop shopping experience, and certainly various "mini-mall" alliances have formed to try to compete in this space.
- I had HP and Microsoft in the same column, referring only to the above-mentioned January announcement. HP is all about private cloud hardware infrastructures, but Microsoft is all about "three screens and the public cloud", so not sure how well this alliance will work out from a Cloud Computing perspective. This was not to imply that the other stacks don't work well with Microsoft software. They all do. Perhaps to avoid that controversy, Chuck chose to highlight HP's acquisition of EDS services instead.
- I used the vendor logos in their actual colors. Notice that the colors black, blue and red occur most often. These happen to be the three most popular ballpoint pen ink colors found on the very same paper documents these computer companies are trying to eliminate. Paper-less office, anyone? Chuck chose instead to colorize each stack with his own color scheme. While blue for IBM and orange for Sun Microsystems make some sense, it is not clear if he chose green for Cisco/VMware/EMC for any particular reason. Perhaps he was trying to subtly imply that the VCE stack is more energy efficient? Or maybe the green refers to money to indicate that the VCE stack is the most expensive? Either way, I would pit IBM's server/storage/software stack up against anything of comparable price from these other stacks in any energy efficiency bake-off.
- What about the Cisco/VMware/NetApp combination? All three got together to assure customers this was a viable combination. IBM is the number one reseller of VMware, and VMware runs great with IBM's N series NAS storage, so I do not dispute Cisco's motivation here. It makes sense for Cisco to two-time EMC in this manner. Why should Cisco limit itself to a single storage supplier? Et tu VMware? Having VMware chose NetApp over its parent company EMC was a bit of a shock. No surprise that Chuck left NetApp out of his chart.
- No love for Dell? I give Dell credit for their work with Virtual Desktop Images (VDI), and for embracing Ubuntu Linux for their servers. Dell's acquisitions of EqualLogic iSCSI-based disk systems and Perot Systems for services are also worth noting. Dell used to resell some of EMC's gear, but perhaps that relationship continues to fade away, as I [predicted back in 2007]. Chuck's decision to leave Dell off his chart speaks volumes to where this relationship stands, and where it is going.
Perhaps we are all in just one big ["echo chamber"], as we are all coming up with similar observations, talking to similar customers, and reviewing similar market analyst reports. I am glad, at least this time, that Chuck and I for the most part agree where the marketplace is going. We live in interesting times!
technorati tags: , Chuck Hollis, EMC, IBM, HP, Microsoft, telephone operators, IT infrastructure, cloud computing, Cisco, VMware, , , Oracle, Sun, NetApp, EqualLogic, iSCSI, NAS, Dell, VDI, Ubuntu, Linux
In his blog post, [The Lure of Kit-Cars], fellow blogger Chuck Hollis (EMC) uses an excellent analogy delineating the differences between kit-cars you build from parts, versus fully-integrated systems that you can drive off the car dealership showroom lot. The analogy holds relatively well, as IT departments can also build their infrastructure from parts, or you can get fully-integrated systems from a variety of vendors.
Is this what your data center looks like?
Certainly, this debate is not new. In my now infamous 2007 post [Supermarkets and Specialty Shops], I explained that there were clients that preferred to get their infrastructure from a single IT supermarket, like IBM or HP, while others were lured into thinking that buying separate parts from butchers, bakers and candlestick makers and other specialty shops was somehow a better idea.
Chuck correctly explains that in the early years of the automobile industry, before major car manufacturers had mass-production assembly lines, putting a car together from parts was the only way cars were made. Today, only the few most avid enthusiasts build cars this way. The majority get cars from a single seller and drive away. In my post [Resolving the Identity Crisis], I postulated that EMC appeared to be trying to shed itself of the "disk-only specialty shop" image and over to be more like IBM. Not quite a full IT Supermarket, but perhaps more like a [Trader Joe's] premium-priced retailer.
(If you find that EMC's focus on integrated systems appears to be a 180-degree about-face from their historical focus on selling individual best-of-breed products, see my previous discussion of Chuck's contradictions in my blog post: [Is Storage the Next Confusopoly].)
While companies like EMC might be making this transition, there is a lot of resistance and inertia from the customer marketplace. I agree with Chuck, companies should not be building kit-cars or IT infrastructures from parts, certainly not from parts sold from different vendors. In my post [Talking about Solutions not Products], I explained how difficult it was to change behavior. CIOs, IT directors and managers need to think differently about their infrastructure. Let's take a quick look at some choices:
Following Chuck's argument, it makes no sense to build a "kit-car" combining Oracle/Sun servers with EMC storage. Oracle would argue it makes more sense to run on integrated systems, business logic on their "Exalogic" system, and database processing on their "Exadata". Benchmark after benchmark, however, IBM is able to demonstrate that Oracle applications and databases run faster on IBM systems. Customers that want to run Oracle applications can run either on a full Oracle stack, or a full IBM stack, and both do better than a kit-car including EMC parts.
- Hewlett-Packard (HP)
HP has been working hard to keep up with IBM in this area. With their their partnership with Microsoft, and acquisitions of EDS, 3Com and 3PAR, they can certainly make a case for getting a full HP stack rather than a kit-car mixing HP servers with EMC disk storage. The problem is that HP is focused on a converged infrastructure for private cloud computing, but Microsoft is focused on Azure and public cloud computing. It will be interesting when these two big companies sort this out. Definitely watch this space.
If you squint your eyes and focus on the part of the world that only has x86 machines, then Dell can be seen as an IT supermarket. In my post about [Entry-Level iSCSI Offerings], I discuss how Dell's acquisition of EqualLogic was a signal that it was trying to get away from selling EMC specialty shop products, and building up its own set of offerings internally.
Cisco is new on the server scene, but has already made quite a splash. Here, I have to agree with Chuck's logic: the only time it makes sense to buy EMC disk storage at all is when it is part of an integrated "V-block". This is not really an IT supermarket situation, instead you park your car at the "Acadia Mini-Mall" and get what you need from Trader Joe's, Cisco UCS, and VMware stores.
But wait, if what you want is running VMware on Cisco servers, you might be better off with IBM System Storage N series or NetApp storage. In his blog post about [Enhanced Secure Multi-Tenancy], fellow Blogger Val Bercovici (NetApp) provides a convincing argument of why Cisco and VMware run better on an "N-block" rather than a "V-block". IBM N series provides A-SIS deduplication, and IBM Real-time Compression can provide additional capacity and performance improvements. That might be true, but whether you get your storage from EMC, NetApp or IBM, to me, you are still working with three different vendors in any case.
Of course, following Chuck's logic, it makes more sense for people with IBM servers, whether they be mainframes, POWER systems or x86 machines, to integrate these with IBM storage, IBM software and IBM services. IBM is the leading reseller of VMware, but also has a lot of business with Microsoft Hyper-V, Citrix Xen, Linux KVM, PowerVM, PR/SM and z/VM. While IBM has market leading servers, disk and tape systems, to compete for those RFP bids that just ask for one component or another, it prefers to sell fully-integrated systems, which IBM has been doing successfully since the 1950s.
Back in 2007, I mentioned how IBM's fully-integrated InfoSphere Balanced Warehouse [Trounced HP and Sun]. For business analytics, IBM offers the fully-integrated [IBM Smart Analytics Systems]. Today, IBM expanded its line of fully-integrated private cloud service delivery platforms with the announcement of the [IBM CloudBurst for on Power Systems], which does for POWER7 what the IBM CloudBurst for System x, Oracle Exalogic, or Acadia's V-block, do for x86.
IBM estimates that private clouds built on Power systems can be up to 70 percent less expensive than stand alone x86 servers.
Before he earned his PhD in Mechanical Engineering, my father was a car mechanic. I spent much of my teenage years covered in grease, helping my father assembling cars, lifting engines, and rebuilding carburetors. Certainly this was good father-son time, and I certainly did learn something in the process. Like the automobile industry, the IT industry has matured, and it makes no financial sense to build your own IT infrastructure from parts from different vendors.
For a test drive of the industry's leading integrated IT systems, see your IBM sales rep or IBM Business Partner.
technorati tags: IBM, kit-cars, supermarkets, specialty-shops, EMC, Chuck Hollis, Oracle, HP, Sun, Dell, NetApp, InfoSphere Balanced Warehouse, Smart Analytics, CloudBurst, VMware, Cisco, Acadia
Storage Networking is part of the IBM System Storage team. There were several break-out sessions on the third day at the [IBM System Storage Technical University 2011] related to storage networking.
- SAN Best Practices
I always try to catch a session from Jim Blue, who works in our "SAN Central" center of competency team. This session was a long list of useful hints and tips, based on his many years of experience helping clients.
- SAN Zoning works by inclusion, limiting the impact of failing devices. The best approach is to zone by individual initiator port. The default policy for your SAN zoning should be "deny".
- Ports should be named to identify who, what, where and how.
- While many people know not to mix both disk and tape devices on the same HBA, Jim also recommends not mixing dissimilar disks, test and production, FCP and FICON.
- The sweet spot is FOUR paths. Too many paths can impact performance.
- When making changes to redundant fabrics, make changes to the first fabric, then allow sufficient time before making the same changes to the other fabric.
- Use software tools like Tivoli Storage Productivity Center (Standard Edition) to validate all changes to your SAN fabric.
- Do not mix 62.5 and 50.0 micron technology.
- Use port caps to disable inactive ports. In one amusing anecdote, he mention that an uncovered port was hit by sunlight every day, sending error messages that took a while to figure out.
- Save your SAN configuration to non-SAN storage for backup
- Consider firmware about two months old to be stable
- Rule of thumb for estimating IOPS: 75-100 IOPS per 7200 RPM drive, 120-150 IOPS per 10K RPM drive, and 150-200 IOPS per 15K RPM drive.
- Decide whether your shop is just-in-time or just-in-case provisioning. Just-in-time gets additional capacity on demand as needed, and just-in-case over-provisions to avoid scrambling last minute.
- Avoid oversubscribing your inter-switch links (ISL). Aim for around 7:1 to 10:1 ratio.
- Don't go cheap on bandwidth between sites for long-distance replication
- Next Generation Network Fabrics - Strategy and Innovations
Mike Easterly, IBM Director of Global Field Marketing, presented IBM System Networking strategy, in light of IBM's recent acquisition of Blade Network Technologies (BNT). BNT is used in 350 of the Fortune 500 companies, and is ranked #2 behind Cisco in sales of non-core Ethernet switches (based on number of units sold).
Based on a recent survey, companies are upgrading their Ethernet networks for a variety of reasons:
- 56 percent for Live Partition Mobility and VMware Vmotion
- 45 percent for integrated compute stacks, like IBM CloudBurst
- 43 percent for private, public and hybrid cloud computing deployments
- 40 percent for network convergences
Many companies adopt a three-level approach, with core directors, distribution switches, and then access switches at the edge that connect servers and storage devices. IBM's BNT allows you to flatten the network to lower latency by collapsing the access and distribution levels into one.
IBM's strategy is to focus on BNT for the access/distribution level, and to continue its strategic partnerships for the core level.
IBM BNT provides better price/performance and lower energy consumption. To help with hot-aisle/cold-aisle rack deployments, IBM BNT provides both F and R models. F models have ports on the front, and R models have ports in the rear.
IBM BNT supports virtual fabric and HW-offload iSCSI traffic, and future-enabled for FCoE. Support for TRILL (transparent interconnect of lots of links) and OpenFlow will be implemented through software updates to the switches.
While Cisco Nexus 1000v is focused on VMware Enterprise Plus, IBM BNT's VMready works with VMware, Hyper-V, Linux KVM, XEN, OracleVM, and PowerVM. This allows single pane of management of VMready and ESX vSwitches.
In preparation for Converged Enhanced Ethernet (CEE), IBM BNT will provide full 40GbE support sometime next year, and offer switches that support 100GbE uplinks. IBM offers extended length cables, including passive SFP+ DAC at 8.5 meters, and 10Gbase-T Cat7 cables up to 100 meters.
- Inter-datacenter Workload Mobility with VMware vSphere and SAN Volume Controller (SVC)
This session was co-presented between Bill Wiegand, IBM Advanced Technical Services, and Rawley Burbridge, IBM VMware and midrange storage consultant. IBM is the leader in storage virtualization product (SVC), and is the leading reseller of VMware.
Like MetroCluster on IBM N series, or EMC's VPLEX Metro, the IBM SAN Volume Controller can support a stretched cluster across distance that allows virtual machines to move seamlessly from one datacenter to another. This is a feature IBM introduced with SVC 5.1 back in 2009. This can be used for PowerVM Live Partition Mobility, VMware vMotion, and Hyper-V Quick Migration.
SVC stretched cluster can help with both Disaster Avoidance and Disaster Recovery. For Disaster Avoidance, in anticipation of an outage, VMs can be moved to the secondary datacenter. For Disaster Recover, additional automation, such as VMware High Availability (HA) is needed to restart the VMs at the secondary datacenter.
IBM stretched cluster is further improved with a feature called Volume Mirroring (formerly vDisk Mirroring) which creates two physical copies of one logical volume. To the VMware ESX hosts, there is only one volume, regardless of which datacenter it is in. The two physical copies can be on any kind of managed disk, as there is no requirement or dependency of copy services on the back-end storage arrays.
Another recent improvement is the idea of spreading the three quorum disks to three different locations or "failure domains". One in each data center, and a third one in a separate building, somewhere in between the other two, perhaps.
Of course, there are regional disasters that could affect both datacenters. For this reason, SVC stretched cluster volumes can be replicated to a third location up to 8000 km away. This can be done with any back-end disk arrays, as again there is not requirement for copy services from the managed devices. SVC takes care of it all.
Networking is going to be very important for a variety of transformational projects going forward in the next five years.
technorati tags: IBM, SAN, FCP, FICON, BNT, VMready, TRILL, OpenFlow, SVC, iSCSI, FCoE, CEE, VMware, ESX, vMotion, VPLEX, MetroCluster, PowerVM,
Monday morning of the [Oracle OpenWorld 2011] conference had Joe Tucci, CEO of EMC, present the keynote. Joe indicated that I.T. stands for "Industry in Transition". He had a chart that showed the history of IT, from the mainframe and mini-computer, to the PC and client/server era, and now to the Cloud era. He called these "waves of disruption". The catalysts for change are a "Budge Dilemma", "Information Deluge" and "Cyber Security". The keynote was very similar to what EMC presented at [VMworld] conference earlier this summer.
"We have failed our customers. Over the past 10 years, they spend 73% to maintain their existing systems, and only 27% for new."
--- Joe Tucci, EMC
While many people equate "EMC" and "Failure", I believe Joe was referring not just to his own company, but most of the other IT vendors as well. Analysts predict that from January 1, 2010 to December 31, 2019, the world of stored data will grow from 0.9 ZB to 35.2 ZB, which represents a 44x increase. During that same time, IT staff is only expected to grow 50 percent. A staggering 90 percent of this data will be unstructured (non-database) content. Meanwhile, the average company gets cyber-attacked 300 times per week.
The answer is Cloud Computing. A few years ago, EMC was trying to get people to go "private cloud" route instead of "public cloud", they now have a more realistic "hybrid cloud" approach similar to IBM. Of the clients that EMC works with, 35 percent are implementing some form of cloud, and another 30 percent are planning to. The tenents of Hybrid Cloud are "Efficiency", "Control" and "Choice" which equals "Agility".
Joe also mentioned that there is now a new "layering" for IT. Instead of storage, switches and servers, we have a cloud platform of shared resources, mobile devices like smartphones and tablets, and management.
Joe feels there is a massive opportunity where Cloud meets Big Data. A cute video showed a driver wearing a motorcycle helmet so you can't see his face get into an under-powered car with "VNXe" on the license plate. He punches in "Cloud and Big Data" into the GPS navigation system, and starts out on city streets. Then the car transforms to an under-utilized family sedan "VNX" on a highway in the middle of the desert, then transforms to an over-priced sports car labeled "VMAX" as it climbs into the mountains surrounded by fog. The video borrowed the "CARS" theme from the videos IBM developed for its 2008 launch of "Information Infrastructure" initiative.
EMC's Pat Gelsinger (CTO) and fellow blogger Chad Sakac did some demos of VMware vCenter. They called the VMware vSphere "the Datacenter-wide OS" indicating that EMC storage has 75 points of integration with their "partner" (VMware is majority-owned by EMC, so I am not sure if partner is the right term). If you don't count Itanium, SPARC, POWER and IBM Syste z architectures, VMware enjoys over 80 percent marketshare for server virtualization.
(Full disclosure: IBM is the leading reseller of VMware.)
Pat claims that 40 percent of Oracle Apps at EMC run VMware. For the longest time, Oracle refused support its apps on VMware, but they relaxed this restrictive policy back in 2009. Today, nearly 25 percent of Oracle Apps run virtualized. EMC claims that they can support 5 million VMs on a single VMAX, and can generate 1 million IOPS from a single VMware ESX host.
Chad did a demo of vFabric which allows a vCenter plug-in to kick up Database instances of OracleDB, MySQL, Hadoop, PostgreSQL, and GreenPlum (GreenPlum is EMC's version of open-source PostgreSQL).
Chad showed that VMware vMition could move workloads from servers without solid-state, to servers that are flash-enabled. Lightweight workloads can be moved from DAS-enabled servers to compute-enabled storage devices like their EMC Isilon. (EMC acquired Isilon to offer their me-too version of IBM's Scale-Out NAS [SONAS] product.) EMC announced their first "Solid-State on a PCIe card" from their Project Lightning initiative. These are 320 GB capacity, so they sounded like a me-too versino of IBM's [Fusion-io IOdrive] cards that IBM has had available for quite some time now.
Next, Pat and Chad talked about Big Data. The world is transforming from a manual scale-up model to an automated scale-out architecture. Moving from "islands" to "pools". They used a cute example of Car Insurance. Business Analytics were able to review a safe drivers record, including the driver's Facebook and Twitter activity, and give him a discount, and then review the bad driving habits of another driver, and raise the bad driver's rates.
EMC announced their "GreenPlum Analytics Platform" (GAP?). I often tell people that if you want to predict what EMC will announce next, just look at what IBM announced 18 months ago. This new platform sounds like their me-too version of IBM's [Smart Analytics System].
After EMC, Judith Sim from Oracle introduced the Ed Lee, the Mayor of San Francisco which was just named the "Greenest city in North America". He thanked the audience for contributing an estimated $100 million USD to his local economy. Also, he was happy that by eliminating paper-based handouts and conference materials, the audience saved 1,636 trees.
Mark Hurd, formerly CEO of HP, and now president of Oracle, gave some highlights of 2011, and what Oracle's strategy is going forward. He said that Oracle plans to provide complete stacks, complete choice, and have each component of the stack be best-of-breed. In 2011, Oracle introduced the new MySQL 5.5 database, Java 7 programming language, and the Solaris 11 operating system with ZFS file system. Oracle spent $4 Billion in R&D, and gained 20 percent growth in software licenses, which gave them 33 percent growth fiscally for 2011 year. Oracle acquired Larry Ellison's [Pillar Data] storage company. Oracle also launched a [Database Appliance].
Thomas Kurian, another Oracle executive, finished the keynote session. He started with yet another chart showing the historical transition from Mainframe to Tablet. He indicated that leading-edge OracleDB and their Fusion middleware combined with industry standard hardware provides 5-30x faster queries, 4-10x less disk space, and simplifies the data center footprint. Their Exadata provides what he likes to call "Hierarchical Storage Management" between DRAM, Flash Solid-State, and spinning disk.
(Note: I started my career at IBM in 1986 working on a product called DFHSM, the Data Facility Hierarchical Storage Manager! It is now a vibrant component of DFSMS, part of IBM's z/OS mainframe operating system.)
ps this new announcement is to address that deficiency.
Finally, Oracle announced their "Exadata Storage Expansion Rack". Many people realized that the Exadata was under-provisioned for storage, which explains why they have only sold a few thousand of them, so perha
If you are attending Oracle OpenWorld, here are sessions for Tuesday that IBM is featuring. Note the first two are Solution Spotlight sessions at the IBM Booth #1111 where I will be most of the time.
- Securing Heterogeneous Database Infrastructures: A Comprehensive Approach
10/04/11, 9:45 a.m. -- 10:15 a.m., Solution Spotlight, Booth #1111 Moscone South
Presenter: Al Cooley, Director, IBM InfoSphere Guardium
- IBM Business Analystics for Oracle Solutions
10/04/11, 2:15 p.m. -- 2:45 p.m., Solution Spotlight, Booth #1111 Moscone South
Presenter: John Strazdins, ERP Strategy Executive
- Consolidated Global View of Your Customer with One Global Billing System
10/04/11, 3:30 p.m. -- 4:30 p.m., OpenWorld session #23650
Presenter: John Waterman, IBM
Enterprise billing system technologies are emerging to assist with global customer views and other challenges banks struggle with today. In this session, Citi discusses its challenges and successes in implementing a global billing system.
- Upgrading Your Siebel CRM with Reduced Risk and Lowered Cost: Customer Successes
10/04/11, 3:30 p.m. -- 4:30 p.m., OpenWorld session #18222
Presenters: Arnaud Wingelaar, IBM; Geetha Sundaram; Agnes Zhang, Oracle
Hear customer success stories about upgrading Siebel CRM. Learn best practices on upgrading with lowered cost, or achieving a high-availability upgrade with zero downtime and reduced risk.
technorati tags: IBM, Oracle, Larry Ellison, Mark Hurd, EMC, Joe+Tucci, Pat Gelsinger, Chad Sakac, Isilon, GreenPlum, OpenWorld, SONAS, Fusion-io, Project+Lightning, VMware, vCenter, vMotion, Exadata, Solaris, MySQL, Java7
Since the [IBM System Storage Technical University 2011] runs concurrently with the System x Technical University, attendees are allowed to mix-and-match. I attended several presentations regarding server virtualization and hypervisors.
- Hypervisor Architecture
Matt Archibald is an IT Management Consultant in IBM's Systems Agenda Delivery team. He started with a history of hypervisors, from IBM's early CP/CMS in 1967, through the latest VMware Vsphere 5 just announced.
He explained that there are three types of Hypervisor architectures today:
- Type 1 - often referred to as "Bare Metal" runs directly on the server host hardware, and allows different operating system virtual machines to run as guests. IBM's System z [PR/SM] and [PowerVM] as well as the popular VMware ESXi are examples of this type.
- Type 2 - often referred to as "Hosted" runs above an existing operating system, and allows different operating system virtual machines to run as guests. The popular [Oracle/Sun VirtualBox] is an example of this type.
- OS Containers - runs above an existing operating system base, and allows multiple "guests" that all run the same operating system as the base. This affords some isolation between applications. [Parallels Virtuozzo Containers] is an example of this type.
The dominant architecture is Type 1. For x86, IBM is the number one reseller of VMware. VMware recently announced [Vsphere 5], which changes its licensing model from CPU-based to memory-based. For example, a virtual machine with 32 virtual CPUs and 1TB of virtual RAM (VRAM) would cost over $73,000 per year to license the VMware "Enterprise Plus" software. The only plus-side to this new licensing is that the "memory" entitlement transfers during Disaster Recovery to the remote location.
"Xen is dead." was the way Matt introduced the section discussing Hybrid Type-1 hypervisors like Xen and Hyper-V. These run bare-metal, but require networking and storage I/O to be processed by a single bottleneck partition referred to as "Dom 0". As such, this hybrid approach does not scale well on larger multi-sock host servers. So, his Xen-is-dead message was referring to all Hybrid-based Hypervisors including Hyper-V, not just those based on Xen itself.
The new up-and-comer is "Linux KVM". Last year, in my blog post about [System x KVM solutions], I mentioned the confusion over KVM acronym used with two different meanings. Many people use KVM to refer to Keyboard-Video-Mouse switches that allow access to multiple machines. IBM has renamed these switches to Local Console Managers (LCM) and Global Console Manager (GCM). This year, the System x team have adopted the use of "Linux KVM" to refer to the second meaning, the [Kernel-based Virtual Machine] hypervisor.
Linux KVM is not a product, but an open-source project. As such, it is built into every Linux kernel. Red Hat has created two specific deliverables under the name Red Hat Enterprise Virtualization (RHEV):
- RHEV-H, a tiny ESXi-like bare-metal hypervisor that fits in 78MB, making it small enough to be on a USB stick, CD-rom or memory chip.
- RHEV-M, a vCenter-like management software to manage multiple virtual machines across multiple hosts.
Personally, I run RHEL 6.1 with KVM on my IBM laptop as my primary operating system, with a Windows XP guest image to run a few Windows-specific applications.
A complaint of the current RHEV 2.2 release from Linux fanboys is that RHEV-M requires a Windows server, and uses Windows Powershell for scripting. The next release of RHEV is likely to provide a Linux-based option for management server.
Of the various hypervisors evaluated, KVM appears to be poised to offer the best scalability for multi-socket host machines. The next release is expected to support up to 4096 threads, 64TB of RAM, and over 2000 virtual machines. Compare that to VMware Vsphere 5 that supports only 160 threads, 2TB of RAM and up to 512 virtual machines.
- Linux KVM Overview
Matt also presented a session focused on Linux KVM. While IBM is the leading reseller of VMware for the x86 server platform, it has chosen Linux KVM to run all of its internal x86 Cloud Computing facilities, as it can offer 40 to 80 percent savings, based on Total Cost of Ownership (TCO).
Linux KVM can run unmodified Windows and Linux guest operating systems as guest images with less than 5 percent overhead. Since KVM is built into the Linux kernel, any certification testing automatically benefits KVM as well. KVM takes advantage of modern CPU extensions like Intel's VT and AMD's AMD-V.
For high availability, in the event that a host fails, KVM can restart the guest images on other KVM hosts. RHEV offers "prioritized restart order" which allows mision-critical images to be started before less important ones.
RHEV also provides "Virtual Desktop Infrastructure", known as VDI. This allows a lightweight client with a browser to access an OS image running on a KVM host. Matt was able to demonstrate this with Firefox browser running on his Android-based Nexus One smartphone.
RHEV also adds features that make it ideal for cloud deployments, including hot-pluggable CPU, network and storage; service Level Agreement monitoring for CPU, memory and I/O resources; storage live migrations to move the raw image files while guests are running; and a self-service user portal.
IBM has been doing server virtualization for decades. When I first started at IBM in 1986, I was doing z/OS development and testing on z/VM guest images. Later, around 1999, I started working with the "Linux on z" team, running multiple Linux images under PR/SM and z/VM. While the server virtualization solutions most people are familiar with (VMware, Hyper-V, Xen) have only been around the last five years or so, IBM has a much deeper and robust understanding and long heritage. This helps to set IBM apart from the competition when helping clients.
technorati tags: IBM, Hypervisor, PRSM, zVM, VMware, Vsphere, ESXi, VirtualBox, Parellels, Matt Archibald, Linux, KVM, RHEV, Hyper-V, RHEV-H, RHEV-M, Xen
IBM had over a dozen storage-related announcements this week. This is my third and final part in my series to provide a quick overview of the announcements.
- IBM Tivoli® Storage Manager v6.3
IBM Tivoli Storage Manager is market-leading software that provides not just backup, but also HSM and archive capabilities across a wide variety of operating systems. Originally developed in the IBM Almaden Research Center, it then moved about 15 years ago to Tucson to become a commercial product.
The new TSM v6.3 introduces site-to-site hot-standby disaster recovery feature that replicates the TSM meta data and data for fast recovery. The maximum number of objects supported has doubled to four billion. Reporting has been enhanced using technologies borrowed from IBM Cognos. Lastly, a feature on Tivoli Storage Productivity Center has been carried forward to deploy and update agents on the various clients.
For more details, see fellow IBM blogger Richard Vining's post on
[TSM v6.3 Announcements]
- IBM Tivoli Storage FlashCopy® Manager v3.1
IBM Tivoli Storage FlashCopy Manager coordinates application-aware backups through the use of point-in-time copy services such as FlashCopy or Snapshot on various IBM and non-IBM disk systems. The versions can remain on disk, or optionally processed by Tivoli Storage Manager to move them to external storage such as tape for added protection.
There will always be a spot in my heart for this product, as the method to use FlashCopy for application-aware backups on the mainframe was my 19th patent, and subsequently delivered as a series of enhancements to DFSMS over the past decade on the z/OS operating system. It is good to see this innovation has "jumped over" to distributed systems.
The new FlashCopy Manager v3.1 adds support for HP-UX and VMware, expands support for IBM DB2 and Oraqcle databases, and introduces an interface for custom business applications.
For more details, see fellow IBM blogger Del Hoobler's post on
[TSM FlashCopy Manager v3.1 Announcements].
- IBM Tivoli Storage Manager for Virtual Environments v6.3
TSM for VE is a new addition to the TSM family, focused on being able to coordinate hypervisor-aware data protection. Initially it supports VMware, but IBM has plans to support a variety of other server virtualization hypervisors as well, as over 40 percent of companies run two or more hypervisors in their data center.
The new TSM for VE v6.3 adds a VMware vCenter plug-in, and support for hardware-based disk snapshots.
- IBM Tivoli Storage Productivity Center v4.2.2
A long time ago, I was the chief architect IBM Tivoli Storage Productivity Center v1, now we are already up to v4.2.2 release!
IBM has added enhanced reporting based on IBM Cognos technology, including storage tiering analysis reports (STAR). Few companies keep all of their storage tiers in a single disk system. Rather, they have different boxes, and often from different vendors. IBM's Productivity Center can report on both IBM and non-IBM disk systems. New this release is support for the internal disks of the Storwize V7000 midrange disk system.
Productivity Center's "SAN Planner" has been enhanced to consider XIV replication criteria. This SAN Planner helps clients decide where to carve LUNs, and to make sure they pick the right place given all of the criteria such as remote copy replications.
Last year, we introduced Productivity Center for Disk Midrange Edition (MRE) which to offer lower price when you are only managing midrange disk systems DS5000, DS3000, Storwize V7000 and SVC managing these. This was so successful, that we now have TPC Select, which is basically Productivity Center Standard Edition (SE) for these midrange disk systems.
Whew! I have already heard from some of my readers to slow down, that this is too much information to deal with all at once. IBM has tried everything from having just a few announcements nearly every Tuesday, to having huge launches every two to three years, and settled in the middle with announcements about four to five times per year.
technorati tags: IBM, Tivoli, Storage, TSM, backup, HSM, archive, FlashCopy, FlashCopy hManager, , VE, VMware, vCenter, Cognos, TPC, MRE, TPC Select
Wrapping up my seven-city romp through Australia and New Zealand, the final city was Canberra, which is the capital of Australia. As with Wellington, this meant many of the clients in the audience work in government agencies.
I had not taken any photos of Anna Wells, IBM Storage Sales Leader for ANZ, but I was able to find this caricature of her on a poster from an award she won within IBM.
I also did not have a picture of Robert, my videographer for this trip, who was always behind the camera himself.
The event went smoothly, just like the rest of them. Anna presented IBM's storage strategy and highlighted specific IBM storage solutions.
I had several emails asking if this event was called "Storage Optimisation Breakfast" because it was held in the mornings, or did we actually serve food at these events. The answer is we actually served food, a variation of the [Full English Breakfast], and most of the attendees gobbled it down while Anna spoke.
The fare was quite similar across all seven locations: scrambled or poached eggs, on toast or english muffin, ham/bacon/sausages, potatoes or mushrooms, and half of a baked tomato with bits of something toasted on top.
One morning, for a change, I decided instead to have a bowl of Weet-Bix cereal. Tasted like cardboard. I learned my lesson.
Next, we had Will Quodling, Manager of Infrastructure Operations, at Australia's Department of Innovation, Industry, Science and Research. The Department of Innovation, Industry, Science and Research consists of 3200 staff that strive to encourage the sustainable growth of Australian industries. The Department is committed to developing policies and delivering programs to provide lasting economic benefits ensuring Australia's competitive future, undertakes analysis, and provides services and advice to the business, science and research community. American President, Barack Obama, visited Australia and was interested in adopting a similar concept for the United States.
The department was looking to replace their existing IBM System Storage DS4800 disk systems with something more energy efficient. They selected IBM XIV storage system, with an expected savings of 10kW per year. They are able to run 800 VMware images and 150 VDI workstations using storage on one XIV, replicate the data to a second XIV at a remote location, and have a third XIV for their Web serving environment. They tested out both single drive and full module failures, and experienced better-than-expected rebuild times, with no impact to users, and no impact to performance.
After 17 days without a functioning government, Australia finally selected a prime minister. Her name is Julia Gillard, shown here. She won in part by promising to build a National Broadband Network (NBN) for the entire country, including the rural areas.
[Canberra] is an interesting town, a fully planned community designed in 1913 by Chicago's husband-and-wife architect team of Walter Burley Griffin and Marion Mahony Griffin. The location was selected as being half-way compromise between Australia's two largest cities, Sydney and Melbourne.
I would like to thank all the wonderful people in both Australia and New Zealand for making this a successful trip!
technorati tags: IBM, Canberra, Australia, Innovation, Government, XIV, DS4800, VMware, VDI
Continuing my coverage of the Data Center Conference 2009, held Dec 1-4 in Las Vegas, the title of this session refers to the mess of "management standards" for Cloud Computing.
The analyst quickly reviewed the concepts of IaaS (Amazon EC2, for example), PaaS (Microsoft Azure, for example), and SaaS (IBM LotusLive, for example). The problem is that each provider has developed their own set of APIs.
(One exception was [Eucalyptus], which adopts the Amazon EC2, S3 and EBS style of interfaces. Eucalyptus is an open-source infrastrcture that stands for "Elastic Utility Computing Architecture Linking Your Programs To Useful Systems". You can build your own private cloud using the new Cloud APIs included Ubuntu Linux 9.10 Karmic Koala termed Ubuntu Enterprise Cloud (UEC). See these instructions in InformationWeek article [Roll Your Own Ubuntu Private Cloud].)
The analyst went into specific Virtual Infrastructure (VI) and public cloud providers.
Private Clouds can be managed by VMware tools. For remote management of public IaaS clouds, there is [vCloud Express], and for SaaS, a new service called [VMware Go].
For private clouds based on Hyper-V, there is the [Dynamic Data Center toolkit]. For public PaaS cloud, Microsoft offers [Azure]. For remote management of SaaS, Microsoft offers [System Center Online Services].
Citrix is the Open Service Champion. For private clouds based on Xen Server, they have launched the [Xen Cloud Project] to help manage. For public clouds, they have [Citrix Cloud Center, C3], including an Amazon-based "Citrix C3 Labs" for developing and testing applications. For SaaS, they have [GoToMyPC and [GoToAssist].
Amazon offers a set of Cloud computing capabilities called Amazon Web Services [AWS]. For virtual private clouds, use the AWS Management Console. For IaaS (Amazon EC2), use [CloudWatch] which includes Elastic Load Balancing.
If you prefer a common management system independent of cloud provider, or perhaps across multiple cloud providers, you may want to consider one of the "Big 4" instead. These are the top four system management software vendors: IBM, HP, BMC Software, and Computer Associates (CA).
A survey of the audience found the number one challenge was "integration". How to integrate new cloud services into an existing traditional data center. Who will give you confidence to deliver not tools for remote management of external cloud services? Survey shows:
- 28 percent: VI Providers (VMware, Citrix, Microsoft)
- 19 percent: Big 4 System Management software vendors (IBM, HP, BMC, CA)
- 13 percent: Public cloud providers (Amazon, Google)
- 40 percent: Other/Don't Know
For internal private on-promise Clouds, the results were different:
- 40 percent: VI Providers (VMware, Citrix, Microsoft)
- 21 percent: Big 4 System Management software vendors (IBM, HP, BMC, CA)
- 13 percent: Emerging players (Eucalyptus)
- 26 percent: Other/Don't Know
Some final thoughts offered by the analyst. First, nearly a third of all IT vendors disappear after two years, and the cloud will probably have similar, if not worse, track record. Traditional server, storage and network administrators should not consider Cloud technologies as a death knell for in-house on-premises IT. Companies should probably explore a mix of private and public cloud options.
technorati tags: , Eucalyptis, IBM, HP, BMC, CA, Amazon, AWS, EC2, Microsoft, Azure, IaaS, PaaS, SaaS, LotusLive, Eucalyptus, S3, EBS, Ubuntu, Linux, UEC, VMware, vCloud+Express, VMware+Go, Xen, Citrix, C3, CloudWatch,
Wrapping up my coverage of the Data Center Conference 2009, the week ends with a celebration. This year we had six "Hospitality Suites" sponsored by various different vendors. Each suite has its own theme, decorations and entertainment. The first suite was VMware's "Cloud 9 Ultra Lounge" which offered blue cotton candy martinis. IBM is the leading reseller of VMware.
When the red martini liquid was poured on top of the blue cotton candy, the result was a nasty muddish brown grey color. The guy on the left chose to get the martini without the blue cotton candy. We joked that this is perhaps a good metaphor for cloud computing in general. It looks good on paper, until you actually put it all together and realize it does not look as blue and puffy as you were expecting. However, it tasted good!
||Next suite was sponsored by Cisco, one of IBM's storage networking partners. Cisco also decorated in blue, as the guy Jake in the middle demonstrates.|
Next suite was sponsored by Brocade, our supplier for IBM-branded networking gear. They went with a red-and-black color scheme. Sadly, many of my pictures inside involved straight jackets and unicycles, so not appropriate for this blog. However, it was easy to remember that they were talking about their "extraordinary networks". Makes you want to help out Brocade by contacting your nearest IBM storage sales rep and buy yourself a SAN768B or two.
Somewhere along the way, we picked up Hawaiian leis at the "Margaritaville" Hospitality Suite, compliments of sponsor APC by Schneider Electric. We had the best "Filet Mignon" appetizers at "Club Dedupe" by our competitor DataDomain, and some fun with my friends over at Computer Associates' "Top Gun" suite. Pictured at right are Paula Koziol with Christian Barrera from Argentina. A good time was had by all.
technorati tags: LSC28, GDC09, Las Vegas, Christian Barrera, Paula Koziol, Brocade, Cisco, VMware, DataDomain, APC, Schneider Electric, Top Gun, Computer Associates
This is my final post on my coverage of the 30th annual [Data Center Conference]. IBM was a Platinum sponsor, and there were over 2,600 attendees, of which 27 percent were IT Directors or higher. Two thirds of the companies have 5000 employees or more. Here is a recap of the last few sessions I attended.
- Best Practices for Data Center consolidation
As if the conference co-chairs aren't already super-busy, here they are presenting one of the breakout sessions. In the 1990s, consolidation was done purely to reduce total cost of ownership (TCO). Today, there are a variety of other reasons, including issues with power and cooling, service level agreements, and security.
Of these, 25 percent plan to have more data centers in three years, and 47 percent plan to consolidate to fewer. The benefits to consolidation include economies of scale, staff reduction, reduced hardware facilities costs, and application retirement. Challenges include dealing with politics, building new facilities to replace the old ones, and bandwidth. Here were some of the primary reasons why data center consolidation projects fail:
- Scope Creep
- Political Sabotage
- Human Resources (HR) issues
- Communications failure
- Resources not freed available
- Lack of Project Management skills
- No rationalization at consolidated site
- Interactive Polling Results
The last keynote session was Thursday morning. The conference co-chairs present the highlights of the interactive polling that was done during the week at this conference.
The first topic was social media. There was a lot of Twitter activity with hashtag #GartnerDC that I followed throughout the week. Most of the tweets seem to be from people who were not actually at the conference.
Some 45 percent of the attendees have implemented social media initiatives at their companies. What tooling are they using to accomplish this? There are some provided by the major ITSM vendors, tools specific for corporate social media such as Yammer, collaboration tools like Microsoft SharePoint and IBM's Lotus Connections, and public sites like Facebook and Twitter. Here were the poll results:
The next topic was focused on Mobile devices and Cloud Computing. For example, do companies store data in public cloud, or plan to in the future, for mobile devices?
One third of the attendees allow employees to bring their own tablet to work with full IT support. Only 18 percent allow employees to bring their own PC or laptop. Over 40 percent felt that their IT department was not yet ready to support smartphones.
What are the main drivers to adopt private cloud? Some are deploying private clouds as a way to defend their IT jobs from going to the public cloud. Here were the poll results:
What problems are companies trying to solve with cloud computing? Here were the poll results:
A majority of attendees that use VMware are exploring LInux KVM, such as Red Hat Enterprise Virtualization (RHEV) or Microsfot Hyper-V. What storage protocol are attendees using for their server virtualization? Here were the poll results:
The next topic was the process for IT service management. The top three were ITIL, CMMI and DevOps, with the majority using ITIL or ITIL in combination with something else. These are needed for release management, change management, performance management, capacity management and incident management. How collaborative is the relationship between IT operations and application development? Here were the poll results:
How well does IT operations contribute to business innovation? This year 38 percent were satisfied, and 33 percent unsatisfied. This was a big improvement over last year, that found 19 percent satisfied, 64 percent unsatisfied.
- Building a Private Storage Cloud: Is It a Science Experiment?
While everyone understands the benefits of private and public cloud computing, there seems to be hesitation about hosted cloud storage. Some people have already adopted some form of cloud storage, and other plan to within 12 months. Here were the poll results:
The top three reasons for considering public cloud storage was to adopt lower-cost storage tier, to benefit from off-site storage, and staff constraints. The top concerns were security and performance.
The IT department will need to start thinking like a cloud provider, and perhaps adopt a hybrid cloud approach. What IT equipment can be re-used? What will the new IT operations look like in a Cloud environment? What were the primary use cases for cloud storage? Here were the poll results:
In addition to the major cloud providers (IBM, Amazon, etc.) there are a variety of new cloud storage startups to address these business needs.
So that wraps up my coverage of this conference. In addition to attending great keynote and breakout sessions, I was able to have great one-on-one discussions with clients at the Solution Showcase booth, during breaks and at meals. IBM's focus on Big Data, Workload-optimized Systems, and Cloud seems to resonate well with the analysts and attendees. I want to give special thinks to Lynda, Dana, Peggy, Hugo, David, Rick, Cris, Richard, Denise, Chloe, and all my colleagues, friends and family from Arizona for their support!
technorati tags: IBM, Data center consolidation, ITSM, Yammer, Cloud Computing, Mobile, VMware, Linux KVM, RHEV, Hyper-V, ITIL, CMMI, DevOps, Cloud storage
A lot was announced this week, so I decided to break it up into several separate posts. This is part 3 in my 3-part series, focusing on our Tivoli Storage products.
To read the rest of the series, see:
- Tivoli Storage FlashCopy Manager v3.2
The latest release of FlashCopy Manager now supports NetApp and IBM N series storage devices. This provides application-aware snapshots, coordinated with applications like SAP, DB2 and Oracle.
FlashCopy Manager now integrates with Metro and Global Mirror capabilities, so that application-consistent copies are available at remote sites for disaster recovery, or to off-load the FlashCopy destination copy from disk to Tivoli Storage Manager storage pools.
- Tivoli Storage Manager v6.4
IBM Tivoli Storage Manager is part of IBM's Unifed Recovery Management. Here are some highlights:
- Enhanced Reporting. Cognos reporting to monitor backup and archive environments.
- TSM for ERP. I remember when these were called "Tivoli Data Protection" modules. We still refer to them as "TDPs". The TSM for ERP provides backup capability for SAP environments, and this latest release adds support for in-memory SAP HANA databases.
- TSM for Virtualization Environments IBM TSM is famous for its patented "Progressive Incremental Backup" which is far more efficient than full+incrementals or full+differentials. IBM now extends this method to VM images. With people consolidating more and more VMs onto fewer host servers, TSM-VE now offers multiple backup streams in parallel. TSM-VE can now take application-aware backups of Microsoft Exchange, SQL Server, and Active Directory running in VMs. TSM-VE will also support vApp and VM templates. If it takes you [a day and a half to build a VMware template], you would want to make sure all that work was backed up, right?
- Enhanced Security. Complex password support and improved user authentication and management by integration with Lightweight Directory Access Protocol (LDAP)
For more on this, read the [TSM v6.4 Announcement Letter]
To learn more about all of the announcements this week, see the [Storage Announcement Page].
technorati tags: IBM, TSM, FCM, TSM-VE, VMware, SAP, HANA
It's Tuesday again, and that means one thing.... IBM Announcements! On the heels of [last week's announcements], IBM announced some additional products of interest to storage administrators.
- IBM Information Archive
Back in 2008, IBM [unveiled the Information Archive]. This storage solution provides automated policy-based tiering between disk and tape, with non-erasable non-rewriteable enforcement to protect against unethical tampering of data. The initial release supported [both files and object storage], with support for different collections, each with its own set of policies for management. However, it only supported NFS initially for the file protocol. Today, IBM announces the addition of CIFS protocol support, which will be especially helpful in healthcare and life sciences, as much of the medical equipment is designed for CIFS protocol storage.
Also, Information Archive will now provide a full index and search feature capability to help with e-Discovery. Searches and retrievals can be done in the background without disrupting applications or the archiving operations.
To learn more, read the [announcement letter].
- IBM Tivoli Storage Manager
IBM Tivoli Storage Manager for Virtual Environments V6.2 extends capabilities that currently exist in IBM Tivoli Storage Manager. TSM backup/archive clients run fine on guest operating systems, but now this new extension improves backup for VMware environments. TSM provides incremental block-level backups utilizing VMware's vStorage APIs for Data Protection and Changed Block Tracking features.
To minimize impact to the VMware host, TSM for VE make use of non-disruptive snapshots and offload the backup processing to a vStorage backup server. This supports file-level recovery, volume-level recovery, and full VM recovery. Of course, since it is based on TSM v6, you get advanced storage efficiency features such as compression and deduplication to minimize consumption of disk storage pools.
To learn more, see the [announcement letter].
- IBM Tivoli Monitoring for Virtual Servers V6.2.3
IBM Tivoli Monitor has been extended to support virtual servers, including VMware, Linux KVM, and Citrix XenServer. This can help with capacity planning, performance monitoring, and availability. Tivoli Monitor will help you understand the relationships between physical and virtual resources to help isolate problems to the correct resource, reducing the time it takes for debug issues between servers and storage. See the
Next week is [IBM Pulse2011 Conference] in Las Vegas, February 27 to March 2. Sorry, I don't plan to be there this year. It is looking to be a great conference, with fellow inventor Dean Kamen as the keynote speaker. For a blast from the past, read my blog posts from Pulse2008 [Main Tent sessions] and [Breakout sessions].
technorati tags: IBM, #ibmpulse, Information Archive, Tivoli, TSM, Tivoli Monitor, VMware, LInux, KVM, Citrix, XenServer
This week, I am in Taipei, teaching Top Gun class. There was concern that another typhoon would hit the island of Taiwan later this week, but it looks like it is now headed for Hong Kong instead.
Elsewhere in the world, there are several events going on next week, so I thought I would bring them to your attention.
- ECTY - South Africa
Next week, Jerry Kluck, IBM Global Sales Executive for Storage Optimization and Integration Services, will be the keynote speaker at "Edge Comes to You" (ECTY) conference in South Africa. This is a one-day event, similar to the [ECTY event in Moscow, Russia] that I spoke at last June.
Here is the schedule for South Africa next week:
- Monday, August 20, 2012 - Johannesburg
- Wednesday, August 22, 2012 - Cape Town
(I have been to both Jo'burg and Cape Town back in 1994. A month after Apartheid had just ended, I was part of a small group of IBMers sent to re-establish IBM's business operations there. I would have liked to have attended the events next week, not just to hear Jerry speak, but also to see how much the country has changed over the past 18 years, but I could not get a work permit in time.)
If you are interested in attending either of these next week, contact your local IBM Business Partner or sales rep to attend.
- Forrester's Total Economic Impact Study of Virtualized Storage
Virtualized storage can help organizations stretch their storage investment dollar and storage administration and management resources. Jon Erickson from Forrester Research will review the latest findings from IBM SAN Volume Control (SVC) users studied as part of the recently completed Forrester Total Economic Impact Study of IBM System Storage SAN Volume Controller.
- Date: Tuesday, August 21, 2012
- Time: 10:00 AM PDT / 1:00 PM EDT
- Duration: 60 minutes
Among the findings, users were able to:
- Avoid the capital cost of additional storage
- Increase IT productivity
- Provide greater end user data availability
The second presenter is Chris Saul, IBM Storage Virtualization Manager, who will explain how SVC can manage heterogeneous disk from a single point of control, autonomously manage tiered disk storage and can store up to five times as much data on your existing disk using IBM Real-time Compression.
To sign up for this webcast, visit the [Registration page].
- Does Your Virtualization Platform Matter?
Not all virtualization solutions are created equal! That's true for storage virtualization, like the SAN Volume Controller mentioned above, and it's true for server virtualization as well.
This webcast discusses the real-world impact on businesses that deploy IBM's PowerVM®
virtualization technology as compared to those using Oracle® VM for SPARC (OVM SPARC), Microsoft® Hyper-V, VMware® vSphere or other competing products.
- Date: Wednesday, August 22, 2012
- Time: 10:00 AM PDT / 1:00 PM EDT
- Duration: 60 minutes
This webcast will include findings from a [Solitaire Interglobal] study of over 61,000 customer sites on the value of virtualization from a business perspective and how IBM's PowerVM provides real business value.
Other key discussion points that will be covered during this webcast include:
- Behavioral characteristics of server virtualization technologies that were examined and analyzed from survey participant's environments
- How IT colleagues were able to obtain a faster time-to-market for business initiatives when using IBM PowerVM
- Why the learning curve time for PowerVM is as much as 2.58 times faster than for other offerings
- Why VM reboot comparisons for PowerVM vs competitive platforms resulted in downtime of 5.5 times less than with other options
- A TCO reduction of up to 71.4% for PowerVM compared to alternative options
This webcast will also feature an in-depth discussion on the IBM PowerVM solution from an IBM product expert who will share the unique virtualization features available when PowerVM is utilized within the IBM Power Systems™ environment.
To sign up for this webcast, go to the [Registration page]
technorati tags: IBM, South Africa, ECTY, Johannesburg, Cape Town, Chris Saul, SAN Volume Controller, SVC, PowerVM, VMware, vSphere, Microsoft, Hyper-V, Oracle, SPARC, OVM
Last week, fellow IBMer Ron Riffe started his three-part series on the Storage Hypervisor. I discussed Part I already in my previous post [Storage Hypervisor Integration with VMware]. We wrapped up the week with a Live Chat with over 30 IT managers, industry analysts, independent bloggers, and IBM storage experts.
This week, Ron continues this meme with his post [Enabling Private IT for Storage Cloud -- Part II (management controls)]. Here's an excerpt:
"The idea of shopping from a catalog isn’t new and the cost efficiency it offers to the supplier isn’t new either. Public storage cloud service providers seized on the catalog idea quickly as both a means of providing a clear description of available services to their clients, and of controlling costs. Here’s the idea… I can go to a public cloud storage provider like Amazon S3, Nirvanix, Google Storage for Developers, or any of a host of other providers, give them my credit card, and get some storage capacity. Now, the “kind” of storage capacity I get depends on the service level I choose from their catalog.
Most of today’s private IT environments represent the complete other end of the pendulum swing – total customization. Every application owner, every business unit, every department wants to have complete flexibility to customize their storage services in any way they want. This expectation is one of the reasons so many private IT environments have such a heavy mix of tier-1 storage. Since there is no structure around the kind of requests that are coming in, the only way to be prepared is to have a disk array that could service anything that shows up. Not very efficient… There has to be a middle ground.
Private storage clouds are a little different. Administrators we talk to aren’t generally ready to let all their application owners and departments have the freedom to provision new storage on their own without any control. In most cases, new capacity requests still need to stop off at the IT administration group. But once the request gets there, life for the IT administrator is sweet!
Here comes the request from an application owner for 500GB of new “Database” capacity (one of the options available in the storage service catalog) to be attached to some server. After appropriate approvals, the administrator can simply enter the three important pieces of information (type of storage = “Database”, quantity = 500GB, name of the system authorized to access the storage) and click the “Go” button (in TPC SE it’s actually a “Run now” button) to automatically provision and attach the storage. No more complicated checklists or time consuming manual procedures.
A storage hypervisor increases the utilization of storage resources, and optimizes what is most scarce in your environment. For Linux, UNIX and Windows servers, you typically see utilization rates of 20 to 35 percent, and this can be raised to 55 to 80 percent with a storage hypervisor. But what is most scarce in your environment? Time! In a competitive world, it is not big animals eating smaller ones as much as fast ones eating the slow.
- Want faster time-to-market? A storage hypervisor can help reduce the time it takes to provision storage, from weeks down to minutes. If your business needs to react quickly to changes in the marketplace, you certainly don't want your IT infrastructure to slow you down like a boat anchor.
- Want more time with your friends and family? A storage hypervisor can migrate the data non-disruptively, during the week, during the day, during normal operating hours, instead of scheduling down-time on an evenings and weekends. As companies adopt a 24-by-7 approach to operations, there are fewer and fewer opportunities in the year for scheduled outages. Some companies get stuck paying maintenance after their warranty expires, because they were not able to move the data off in time.
- Want to take advantage of the new Solid-State Drives? Most admins don't have time to figure out what applications, workloads or indexes would best benefit from this new technology? Let your storage hypervisor automated tiering do this for you! In fact, a storage hypervisor can gather enough performance and usage statistics to determine the characteristics of your workload in advance, so that you can predict whether solid-state drives are right for you, and how much benefit you would get from them.
- Want more time spent on strategic projects? A storage hypervisor allows any server to connect to any storage. This eliminates the time wasted to determine when and how, and let's you focus on the what and why of your more strategic transformational projects.
If this sounds all too familiar, it is similar to the benefits that one gets from a server hypervisor -- better utilization of CPU resources, optimizing the management and administration time, with the agility and flexibility to deploy new technologies in and decommission older ones out.
Arthur Cole disagrees. His blog post asks [
'Storage Virtualization' or 'Virtualization-Optimized Storage Management'?] Here is an excerpt:
"Server virtualization is a fairly easy concept to understand: Add a layer of software that allows processing capability to work across multiple operating environments. It drives both efficiency and performance because it puts to good use resources that would otherwise sit idle.
Storage virtualization is a different animal. It doesn't free up capacity that you didn't know you had. Rather, it allows existing storage resources to be combined and reconfigured to more closely match shifting data requirements. It's a subtle distinction, but one that makes a lot of difference between what many enterprises expect to gain from the technology and what it actually delivers."
Jon Toigo on his DrunkenData
blog brings back the sanity with his post [Once More Into the Fray
]. Here is an excerpt:
"What enables me to turn off certain value-add functionality is that it is smarter and more efficient to do these functions at a storage hypervisor layer, where services can be deployed and made available to all disk, not to just one stand bearing a vendor’s three letter acronym on its bezel. Doesn’t that make sense?
I think of an abstraction layer. We abstract away software components from commodity hardware components so that we can be more flexible in the delivery of services provided by software rather than isolating their functionality on specific hardware boxes. The latter creates islands of functionality, increasing the number of widgets that must be managed and requiring the constant inflation of the labor force required to manage an ever expanding kit. This is true for servers, for networks and for storage.
Can we please get past the BS discussion of what qualifies as a hypervisor in some guy’s opinion and instead focus on how we are going to deal with the reality of cutting budgets by 20% while increasing service levels by 10%. That, my friends, is the real challenge of our times."
Did you miss out on last Friday's Live Chat? We are doing it again this Friday, covering parts I and II of Ron's posts, so please join the conversation! The virtual dialogue on this topic will continue in another [Live Chat] on September 30, 2011 from 12 noon to 1pm Eastern Time.
technorati tags: IBM, Ron Riffe, Storage Hypervisor, Art Cole, Jon Toigo, DrunkenData, Amazon S3, Nirvanix, Google, VMware, SSD, automated tiering, abstraction layer