Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is a Master Inventor and Senior IT Specialist for the IBM System Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2011, Tony celebrated his 25th year anniversary with IBM Storage on the same day as the IBM's Centennial. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
I survived my first day at SNW Spring 2007.This is my first time at SNW, but it is very much like many of the other conferences I have been to.It officially started Monday morning with pre-conferencetutorials and primer break-outsessions that covered storage fundamentals, but I didn't arrive until late Monday night due to highwind conditions at the Phoenix airport that delayed my travel.
Tuesday started out with main tent sessions. Ron Milton, VP of ComputerWorld that puts on this conference,and Vincent Franceschini, Chairman of the Board for SNIA, kicked off the event.It didn't take them long to get into the alphabet soup: ILM, ITIL, SMI-S, XAM, IMA, MMA, DDF,MF, DMF, IPSF, SSIF, and SRM.Several hundred people had "voting devices" so that they could participate in "informal" surveys.
Q1. What was the greatest need?
37% Storage Resource Management (SRM) tools
19% Storage Virtualization
19% Information Lifecycle Management (ILM)
14% Integration with other management tools
11% Compliance storage for regulations
Q2. What are people doing to address storage infrastructure complexity?
33% Deploying new SRM and SAN management tools
26% Adopting "Storage as a Service" methodology
22% Deploying new storage virtualization technologies
8% Hiring more staff
9% (complexity was not an issue)
The first keynote speaker was Cora Carmody, CIO of SAIC. In the late 1980s and early 1990s, I did a lot of work with SAIC here in San Diego, and so IBM sent me to San Diego quite frequentlyfor face-to-face meetings with them. Her talk was cryptically titled "Jumbo Shrimp, InformationManagement, and the Mark of the Beast." Coming up with good titles is important. Some of herkey points:
"Information management" was as much an oxymoron as "jumbo shrimp" or "military intelligence".(SAIC is a general contractor for the US Military, so this was especially funny).
Computer data needs both "ownership" and "stewardship".
Gartner analyst reports that 50% of digital information for a business resides in personal files onindividual PCs.
PAN-StaRRs project is ingesting 10TB per week of astronomical data.
TeraTEXT(R) project is a non-relational database that supports a large mix of structured and unstructured content.
The next "Y2K" crisis for the USA is changing from 3-digit to 4-digit area codes for our telephone numbers.
Battery size and life have not advanced as fast as we need
There has been little progress in "User Interface" ease of use
Formats and standards are picked for the most part by the winning vendors, and it is the silence of themarketplace that lets them get away with this.
We are overly reliant on an inherently insecure medium.
The "mark of the beast" refers to exciting new technologies based on "presence awareness". For example,some hotels now are able to check you into the hotel as you drive up in your car, based on your car's licenseplate. Some 24-hour gyms use your fingerprint as your entry credentials, eliminating the need to staff peopleat the front desk.
IBM's own Barry Rudolph, presented "Storage in an Age of Inconvenient Truths", dressed up like Oscar-winner andformer USA Vice President Al Gore. Barry's focus was on the growingconcern of over environmental Power and Cooling issues in the data center. According to IDC, the cost of power and cooling an individual server, over its lifetime, now exceeds its acquisition cost. Storage devices are not as bad as servers in this regard. Data centers now consume 1.2% of the worlds energy.
Over lunch, I heard Tony Asaro from ESG present "The Need for Highly Virtualized Storage Systems withina Virtualized Data Center." His concern is that there is still a "heavy touch" required to manage storage.Without virtualization, your data center is less than the sum of its parts. Although IBM has been doingstorage virtualization since 1974, Tony mentioned that most storage vendors were "late to the party".He argues that "internal virtualization" inside storage arrays is not enough, you need "external virtualization"(like the IBM System Storage SAN Volume Controller) to virtualize your entire infrastructure.What storage administrators would like is for storage to have consumer levels of "ease of use", and today'snon-virtualized storage environments are nowhere near that.
"The great advantage [the telephone] possesses over every other form of electrical apparatus consists in the fact that it requires no skill to operate the instrument." - Alexander Graham Bell, 1878
I attended a few break-out sessions in the afternoon.
Ralph presented "Crisis of Capacity" which covered the drastic actions he had to take to handle power and coolingin their expanding data center during their summer months, where temperatures peak up to 105 degrees. This included creating "hot" and "cold" aisles onhis raised floor by re-organizing the perforated floor tiles, and doing a better job standardizing how cables areconnected to the back of racks and up through the ceiling to maximize airflow. An amp-meter on each power strip was used to measure the powerused at each rack, which allowed them to better prioritize their efforts. Their Air Conditioning unit was only 12inches from the concrete floor, and raising it to 18 inches greatly reduced noise and vibration. Adding a second AC unit made a world of difference. Finally, they eliminatedKVMs, because people who use KVMs break other parts of thedata center. His rule of thumb: the cooling requirements will be 50% of the rated power requirements for equipment.
Terry Yoshi, Intel internal IT department, as a member of the SNIA's end user council
Terry presented "Taming the SAN Complexity". The problem with "complexity" as a concept is that it is very subjective, difficult to quantify, and therefore difficult to manage. He presented complexity in four areas:Organizational structure of the company as a whole; skill sets required of the IT staff; business process andprocedures; and technology. Dealing with complexity is a battle between Old School (because we've always doneit this way) and New School (because it is new and different technology). Storage Area Networks are inherentlya "shared resource", and the increased complexity is a direct result of the low reliability of the componentsand devices it is composed of. People should focus on the "Total Cost of Ownership" (TCO) for a SAN, and not just the initial acquisitionprice of SAN gear.He was not a fan of the "dual/multiple" vendor strategy that many companies employto reduce costs. His suggestion that things should be tried out first on your "test SAN" caused some chuckles,as few have such a thing. Finally, he suggested not only documenting "Best Practices" and "Best Known Methods"but also things that have been found not to work, his do-not-try-this-at-home list.
Tony Antony, Cisco marketing manager for Optical products
This was an overview of the technologies available for long distance connections for disaster recovery,business continuity, and resilience. He covered three levels.
IP - Fibre Channel of IP (FCIP) offers the greatest "global" distance but forces people into asynchronous mirroring.
SONET/SDH - SONET is what we call it in the USA, and SDH is what it is called in other countries. This provides state-to-state or "out-of-region" distances, which is ideal to meet certain government regulations for homeland defense. He suggests this is offered when dark fiber or DWDM is not available.
DWDM/CWDM - this is using a prism to run multiple colors of light through a single fiber optic cable. CWDM ischeaper, but only handles 8 signals per cable. DWDM can handle 32 to 160 signals per cable, but is more expensive.
His rule of thumb: one buffer credit for every kilometer at 2Gbps speed (for every 2km at 1Gbps).
The day ended at the "Expo". I hung out at the IBM booth to help answer questions and network with others.
IBM had some big announcements today. The theme for today's announcement was "Protected Information", as there are many reasons to protect your most strategic asset, your information. Let's do a quick run-down of a few of them.
IBM LTO generation 4
LTO 4 provides encryption at the drive level, and supports WORM cartridges similar to LTO 3. It continues the LTO consortium's strategy for higher capacity and faster performance. If you have LTO 1 or LTO 2, now is a good time to consider upgrading your tape technology. The combination of encryption and WORM protects your information against unauthorized access, and unethical tampering of the data. The support is from our largest automated tapelibrary (TS3500),to our smallest drives.
TS7520 Virtualization Engine
The TS7520replaces the TS7510, providing enhanced Virtual Tape Library (VTL) capability. When you hear "storage virtualization" you often think disk, but IBM invented "tape storage virtualization" and this product continues that leadership.
Support for Half-high LTO 3 drives
The TS3100 and TS3200 now support half-high LTO 3 drives, which means you can have twice the number of drives in each unit. LTO 4 drives can read and write to LTO 3 media, so this provides additional investment protection.
IBM System Storage DR550 File System Gateway
This new offering provides much-needed CIFS and NFS access to the DR550, the worlds most flexible compliance-and-retention storage available. Already there is a large body of ISVs that support the DR550 today, and with this new gateway, the list is even longer. The DR550 provides encryption for both disk and tape data, as well as policy-based non-erasable, non-rewriteable enforcement, designed for compliance with government regulations like Sarbanes-Oxley Act, HIPAA, and many others.
IBM System Storage SAN32B-3 switch
This is the first major deliverable from Brocade since their acquisition of McDATA. A powerful switch packs 4 Gbps support in a small 1U form factor. Start with 16 ports, then add in increments of 8 ports to a maximum of 32 ports.
I've provided all the links, so that you can delve deeply into all the data sheets.
We had a great event today! This was a first-of-a-kind product launch, using Second Life as the medium. We invited IBM Business Partners, industry analysts and reporters from the Press to have their "avatars" in-world to watch us launch new tape systems, archive and retention systems, and disk systems announced this month.
Andy Monshaw, IBM System Storage General Manager, welcomed everyone to the event, and introduced our three speakers.He mentioned that this was a great innovative way to meet, collaborate and forge relationships without the carbon pollution associated with travel required by a more traditional face-to-face meeting. We had attendees from the USA, UK, Germany, Sweden, Italy, Colombia, and Brazil.
All the attendees were given a "goody bag" that contained IBM BP-logo clothing, animations and gestures to be used during the meeting.
Eric Buckley, one of our marketing managers for tape systems, introduced our complete line of LTO 4 tape systems, as wellas the TS7520 Virtualization Engine, a virtual tape library for Windows, UNIX and Linux servers. Eric had a virtual 3-Dversion of an LTO cartridge that is photo-realistic and dimensionally correct.
Funda Eceral, our solutions manager for archive and retention offerings, presented the new version of the IBM System Storage DR550, the DR550 file system gateway, and the IBM System Storage Multilevel Grid Archive Manager. At first we thought we would "pass the microphone" from speaker to speaker, but it turned out to be easier just to give all three speakers their own microphone.
Last, but not least, was David Tareen, marketing manager for disk systems, covering the entry-level DS3000 Express disk system bundles designed for our SMB client. David used a black-and-brown pointer stick to point out specific things on the charts.
After the presentations, Kristie Bell, VP of Marketing for IBM System Storage, hosted a Question & Answer (Q&A) panel.Avatars rose their left hand to indicate they had a question.
We thought it would be a good idea to have a few minutes at the end to socialize over a cup of coffee. This involved making a "coffee machine" that dispensed coffee, and the appropriate animations and gestures so that everyone could sip the coffee, and hold the coffee at waist level when they were talking.
The event was held upstairs in one of the conference rooms of the IBM Briefing Center, located on "IBM 8" island.Many people went to the ground floor to look at the many IBM System Storage products on display. Unlike a picture on a web-page, Second Life gives you a 3-D view that you can walk around each product, and get a feel for the size and shape of the hardware.
We had four photographers and camera-persons on hand to capture still shots, video, audio, and chat text, and are working now to combine them for marketing collateral. I want to thank the builders, script programmers, animators, clothing designers, speakers, editors, and channel enablement team for making this event such a great success!
Today was the "First Ever Live Virtual Virtualization Tech Fair" sponsored by IBM and VMware. This was a 1-day event hosted by Unisfair.
The day included presentations done at a conference call, along with exhibition booths.
We had an exhibition booth exclusively for "storage virtualization" featuring our IBM System Storage SAN Volume Controller (disk virtualization) and IBM System Storage TS7520 Virtualization Engine (a virtual tape library, or VTL).
People who were logged in were represented in silhouette form. When someone walked into the booth, our army of "booth reps" were able to chat with them and answer their questions. They could also peruse the various online materials we made available about each product.
Here are some of my observations:
A lot of questions were related to IBM's support for VMware. Although VMware is now currently owned by EMC, pending a spin-off IPO, IBM is its biggest reseller, given IBM's vast experience in server virtualization. Ironically, IBM's SAN Volume Controller supports VMware better than EMC's own storage virtualization product, Invista.
People also familiar with Second Life thought this 2-D "silhouette" version eliminated the need to configure and dress up your avatar as is required in participating in Second Life events. However, being only ableto chat, send e-mail and show web pages seemed less immersive than what Second Life can offer.
This event generated over 60 leads. We will pass on the contact information to the appropriate sales team.
Many often associate CAS with EMC's Centera offering, but with IBM's comprehensive set of compliance storageofferings, EMC doesn't talk about CAS or Centera much anymore.I covered the confusion around CAS in a previous post. When clients ask for "CAS" what they really are looking for is storage designed forfixed content, unstructured data that doesn't change once written. A lot of data falls under this category, such as scanned documents, audio and video recordings, medical images, and so on. Some laws and regulations further require enforcement that the data is not deleted or tampered with, until some time after an event or expiration date is met.
In the past, clients used write-once read-many (WORM) optical media, but today we have disk and tape offerings instead. Since the term "WORM" is inappropriate fordisk-based solutions, IBM has standardized to the use of the term "non-erasable, non-rewriteable" (NENR) to discusstoday's solutions and offerings.
Let's recap what IBM has to offer:
IBM System Storage DR550
This comes in both large version (DR550) andsmall version (DR550 Express).Both offerings provide NENR protection of fixed content data with your choice of a disk-only or disk-and-tape configuration. IBM also announced a DR550 file system gateway, extending the number of applications that can take advantage of this offering.
IBM System Storage N series with SnapLock(tm)
IBM has seen great success with the N series disk systems. A specificfeature called SnapLock allows some of the data stored to be NENR protected until an expiration date is met. As partof IBM's emphasis for "unified storage", a single N series appliance or gateway can manage both regular (erasable/modifiable) data with NENR data. Combining this with our recently announced Advanced Single InstanceStorage (A-SIS) de-duplication feature, and you get a very cost-effective offering!
IBM System Storage Multilevel Grid Access Manager Software
A fourth option for NENR data is WORM tape. IBM supports WORM cartridge media in both the enterprise TS1120 drive as well as LTO3 and LTO4 drives. The advantage is that you don't need unique tape drives for WORM support. IBM drives can read and write both regular and WORM cartridges, and provide a cost-effective alternative to optical media.
As you see, IBM doesn't limit itself to disk-only offerings. Our leadership in tape allows us to innovate tape and disk-and-tape offerings that can provide more cost-effective solutions to store fixed content, retention managed data.The next time you have a conversation with a storage vendor, don't ask for CAS, ask instead for archive and compliance storage. Broaden your mind, and broaden the set of options and choices that might provide a better fit for your requirements.
IDC announced that IBM was number #1 in storage hardware (disk and tape combined)for 2006. Here are some excerpts from the IBM press release:
The newly released May 2007 report  by leading industry analyst firm IDC, "Worldwide Combined Disk and Tape Storage 2006 Market Share Update," shows IBM in the #1 overall position for all disk and tape storage hardware for the full year 2006.
In a total disk and tape storage hardware segment that increased to $28.2 billion in 2006, IBM captured 22.2 percent of the combined revenue for full year 2006, besting HP's 20.9 percent and EMC's 13.2 percent.
Five years ago, IBM was only #3 in this area, butis this new standing from IBM doing things better, or HP and EMC doing things poorly? Probably a little of both, but since it's not polite to point out the flaws of others in a blog, I will focus on what IBM is doing right, and I think our leadership in tape accounts for a good measure of this.
The resurgence of tape comes from a variety of factors:
The focus on being "green", to conserve energy power and cooling costs. Tape is the cheapest storage in this regard, as the tape cartridges only consume power when read or written.
Government regulations where more data must be stored for longer periods of time, such as theFederal Rules of Civil Procedures (FRCP), Sarbanes-Oxley, SEC regulations, and so on.
The widening gap in dollars per MB. Advancements in tape are outpacing disk. Disk is slowing down to about 25% improvement year on year, but tape continues its 30-40% improvement curve. A solution like Information Lifecycle Management (ILM) that moves older less valuable data from disk to tape can result in excellent cost savings.
Exciting "combined storage" solutions like the IBM System Storage DR550 and the IBM Grid Medical Archive Solution (GMAS) that combine disk and tape with internal hierarchy storage management of data, based on policies.
Last week, I opined that Monday's IDC announcement "IBM #1 in combined disk and tape storage hardwaresales for 2006" was in part because of a resurgence of interest in tape, with four specific examples. There was a lot of reaction and reflection fromboth sides.
On the one side...
EMC blogger Mark Twomey at Storagezilla admits that perhapsTape Isn't Dead after all,is perhaps the best place to put long-term archive data, but not for backup? EMC's "creative marketing types" put out this Fun With Tape video that I found amusing. (It asks for a first name,last name, and e-mail address, which are then embedded into the resulting video itself, and perhaps forwarded to your nearest EMC sales rep, so answer according to your wishes for privacy).
The "mummy wrapped in tape media" seems to be a common theme, and shows up again in LiveVault'svideo with John Cleese, which makes the same argument asthe EMC video above, namely: switch your backups from tape to disk because we are a disk-only vendor.
... and on the other side
JWT over at DrunkenData asks Which is greener, disk or tape?Tape is, of course, by a long shot, and an essential part of IBM's Big Green initiative, a project to invest$1US Billion dollars per year for data centers to be more efficient for power and cooling.
Sun/StorageTek blogger Randy Chalfant questions the Death of Tape, and argues thatdisk-only solutions suffer from atrophy.The results he posts from a survey of 200 customers are similar to those we've seen with customers using IBM TotalStorage Productivity Center, our software to help evaluate data usage, and identify misuse, in your data center.
To my readers in the USA, United Kingdom, Ireland, South Africa, China and Japan, and a few other countries, Happy Father's Day!
A client complained that their tape drives were not compressing data as well as it used to. Investigating further reminded me of a scene from the 1970's television show "All in the family", summarized well inAmerican Scientist:
... in one episode of All in the Family, Archie Bunker's son-in-law, Mike, watches Archie put on his shoes and socks. Mike goes into a conniption when Archie puts the sock and shoe completely on one foot first, tying a bow to complete the action, while the other foot remains bare. To Mike, if I remember correctly, the right way to put on shoes and socks is first to put a sock on each foot and only then put the shoes on over them, and only in the same order as the socks. In an ironic development in his character, the politically liberal Mike shows himself to be intolerant of differences in how people do common little things, unaccepting of the fact that there is more than one way to skin a cat or put on one's shoes.
Both agreed that socks go first, then shoes, but the actual deployment was different.
In the case of this customer, a recent change was the use of "encryption" before the data reached the tape drive. In regards to compression and encryption, you should always compress first, then encrypt. Compression algorithms rely on frequency of data, for example the letter "E" appears more often in the English language than the letter "Z". However, once you encrypt data, those data patterns are randomized, and any attempt to compress the data afterwards is wasted effort.
With IBM tape encryption on either the TS1120 or LTO4 tape drives, we compress, then encrypt, the data when it arrives to the tape drive, so that the compression has some chance of getting up to 3:1 reduction. This compress-then-encrypt process can be done at the host as well, either from the application software or feature of the operating system.
So, just as the case between Archie Bunker and his son-in-law, there are many ways to deploy compression and encryption, just make sure you do them in the right order to get the most benefit.
Back in the late 1980's and early 1990's, I was one of the architects for DFSMS on z/OS, and customers always asked, "What is the clip level?", in other words, how big does a customer have to be to take advantage of DFSMS. We worked it out that if you had more than 100GB of disk data, DFSMS is worthwhile. DFSMS is now just standard by default, as everyone now easily has more than 100GB of data.
Later, in the late 1990's, I worked on Linux for System z. Again, customers asked how many Linux guest images would justify deploying applications on a mainframe. We worked it out to about 10 images. 10 Linux logical partitions, or Linux guests under z/VM was enough to cost justify the entire investment.
So what is the "clip level" for SANs? How many servers does an SMB need to have to justify deploying a SAN? IBM announced the new BladeCenter S designed specifically for mid-sized companies, 100 to 1000 employees, typically running 25 to 45 servers. However, I suspect companies as small as 7-10 servers would probably benefit from deploying an FC or IP SAN.
What do you think? Send me a comment on how many servers should be the clip level.
Use more efficient disk media, such as high-capacity SATA disk drives
Both are great recommendations, but why limit yourself to what EMC offers? Your x86-based machines are only a subset of your servers,and disk is only a subset of your storage. IBM takes a more holistic approach, looking at the entire data center.
VMware is a great product, and IBM is its top reseller. But in addition to VMware, there are other solutions for the x86-based servers, like Xen and Microsoft Virtual Server. IBM's System p, System i, and System z product lines all support logical partitioning.
To compare the energy effectiveness of server virtualization, consider a metric that can apply across platforms. For example, for an e-mail server, consider watts per mailbox. If you have, say, 15,000 users, you can calculate how many watts you are consuming to manage their mailboxes on your current environment, and compare that with running them on VMware, or logical partitions on other servers. Some people find it surprising that it is often more cost-effective, and power-efficient, to run workloads on mainframe logical partitions (LPARs) than a stack of x86 servers running VMware.
More efficient Media
SATA and FATA disks support higher capacities, and run at slower RPM speeds, thus using fewer watts per terabyte.A terabyte stored on 73GB high-speed 15K RPM drives consumes more watts than the same terabyte stored using 500GB SATA.Chuck correctly identifies that tape is more power-efficient than disk, but then argues that paper is more power-efficient than tape. But paper is not necessarily more efficient than tape.
ESG analyst Steve Duplessie divides up data betweenDynamic vs. Persistent. The best place to put dynamic data is on disk, and here is where evaluation of FC/SAS versus SATA/FATA comes into play.Persistent data, on the other hand, can be stored on paper, microfiche, optical or tape media. All of these shelf-resident media consume no electricity, nor generate any heat that would require additional cooling.
A study by scientists at the Lawrence Berkeley National Laboratory titled High-Tech Means High-Efficiency: The Business Case for Energy Management in High-Tech Industries indicates thatData centers consume 15 to 100 times more energy per square foot than traditional office space. Storing persistent data in traditional office space can save a huge amount of energy. Steve Duplessie feels the ratio of dynamic to persistent data is 1:10 today, but is likely to grow to 1:100 in the near future, raising the demand for energy-efficient storage of persistent data ever more important to our environment.
Data centers consume nearly 5000 Megawatts in the USA alone, 14000 Megawatts worldwide. To put that in perspective, the country of Hungary I was in last week can generate up to 8000 Megawatts for the entire country (and they were using 7400 Megawatts last week as a result of their current heat wave, causing them grave concern).
Back in the 1990's, one of the insurance companies IBM worked with kept data on paper in manila folders, and armiesof young adults in roller skates were dispatched throughout the large warehouses of shelves to get the appropriate folder in response to customer service inquiries. Digitizing this paper into electronic format greatly reduced the need for this amount of warehouse space, as well as improved the time to retrieve the data.
A typical file storage box (12 inch x 12 inch x 18 inch) containing typed pages single-spaced, double-sided, 12 point font could hold perhaps 100MB. The same box could hold a hundred or more LTO or 3592 tape cartridges, each storing hundreds of GB of information. That's a million-to-one improvement of space-efficiency, and from a watts-per-TB basis, translates to substantial improvement in standard office air conditioning and lighting conditions.
To learn more about IBM's Project Big Green, watch thisintroductory video which used Second Life for the animation.
I've blogged about some of these videos already, but since there are probably a few out there buying the brand new Apple iPhone looking for YouTube videos to play on them, these links might provide some exampleentertainment on your new handheld device.
Next week has "Fourth of July" Independence Day holiday in the USA smack in the middle of the week, so I suspect the blogosphereto quiet down a bit. So whether you are working next week or not, in the USA or elsewhere, take some time to enjoy your friends and family.
It's Tuesday, which means IBM makes its announcements. We had several for the IBM System Storage product line. Here's a quick recap.
The IBM System Storage DS3000 now offers DC power models.New DC powered models of the DS3200, DS3400, and EXP3000 are well suited for Telco industry environments, as theseare NEBS and ETSI compliant and are powered by an industry standard 48 volt DC power source.
Also, the IBM System Storage N series now supports750GB SATA drives available for the EXN1000 drawer.
IBM Virtualization Engine TS7740now supports 3-cluster grids. Unlike 3-way replication on disk mirroring, such as IBM Metro/Global Mirror for the DS8000 that enforces a primary, secondary and tertiary copy, the grid implementation of TS7740 tape virtualization allows for any-to-any mirroring. Existing standalone TS7740 clusters can be converted to grid-enabled. A "Copy Export" feature allows virtual tapes to be exported onto physical tape. And in keeping with our theme of "enabling business flexibility", performance throughput can now be purchased in 100 MB/sec increments, up to 600 MB/sec, to match your workload bandwidth requirements.
The IBM System Storage TS1120drives installed in the IBM System Storage™ TS3400 Tape Library can now be attached to System z platforms using the IBM System Storage™ TS1120 Tape Controller. Before this, the TS3400 could only be attached to UNIX, Windows and Linux systems.
The IBM System StorageTS2230 Express is offered as an external stand-alone or rack-mountable unit. This model incorporates the new LTO IBM Ultrium 3 Serial Attached SCSI (SAS) Half-High Tape Drive, and a 3 Gbps single port SAS interface for a connection to a wide spectrum of distributed system servers that support Microsoft Windows and Linux systems.
IBM has added theCisco MDS 9124 for IBM System Storageentry-level fabric switch as an Express offering and part of the IBM Express Advantage Program. Express offerings are specifically created for mid-market companies and are well suited for workgroup storage applications like e-mail serving, collaborative databases and web serving. They bring enterprise-class performance, scalability and features to small and medium-sized companies and are easy to use, highly scalable, and cost-effective.This will make it easier for IBM Business Partners to provide fabric switch connectivity for:
Storage consolidation solutions with IBM System Storage™ DS4000 Express disk arrays, especially the DS4700 Express.
Backup / restore solutions with IBM System Storage™ TS3000 Tape Libraries, such as the TS3200.
Archive and Retention
Ordering large configurations of the IBM System Storage Grid Access Manager just got a lot easier.New features enable configurations greater than 500 TB to be submitted as a single order. No change in the actualproduct, just an improvement in the ordering process.
For System p and System i servers, the IBM 3996 Optical library now supports Gen 2 60GB optical cartridges. These can be read/write or WORM cartridges.
I'm off to Denver, Colorado this week. I hope it is cooler there than it is down here in Tucson, Arizona.
Miles per Gallon measures an effeciency ratio (amount of work done with a fixed amount of energy), not a speed ratio (distance traveled in a unit of time).
Given that IOPs and MB/s are the unit of "work" a storage array does, wouldn't the MPG equivalent for storage be more like IOPs per Watt or MB/s per Watt? Or maybe just simply Megabytes Stored per Watt (a typical "green" measurement)?
You appear to be intentionally avoiding the comparison of I/Os per Second and Megabytes per Second to Miles Per Hour?
May I ask why?
This is a fair question, Barry, so I will try to address it here.
It was not a typo, I did mean MPG (miles per gallon) and not MPH (miles per hour). It is always challenging to find an analogy that everyone can relate to explain concepts in Information Technology that might be harder to grasp. I chose MPG because it was closely related to IOPS and MB/s in four ways:
MPG applies to all instances of a particular make and model. Before Henry Ford and the assembly line, cars were made one at a time, by a small team of craftsmen, and so there could be variety from one instance to another. Today, vehicles and storage systems are mass-produced in a manner that provides consistent quality. You can test one vehicle, and safely assume that all similar instances of the same make and model will have the similar mileage. The same is true for disk systems, test one disk system and you can assume that all others of the same make and model will have similar performance.
MPG has a standardized measurement benchmark that is publicly available. The US Environmental Protection Agency (EPA) is an easy analogy for the Storage Performance Council, providing the results of various offerings to chose from.
MPG has usage-specific benchmarks to reflect real-world conditions.The EPA offers City MPG for the type of driving you do to get to work, and Highway MPG, to reflect the type ofdriving on a cross-country trip. These serve as a direct analogy to SPC having SPC-1 for Online transaction processing (OLTP) and SPC-2 for large file transfers, database queries and video streaming.
MPG can be used for cost/benefit analysis.For example, one could estimate the amount of business value (miles travelled) for the amount of dollar investment (cost to purchase gallons of gasoline, at an assumed gas price). The EPA does this as part of their analysis. This is similar to the way IOPS and MB/s can be divided by the cost of the storage system being tested on SPC benchmark results. The business value of IOPS or MB/s depends on the application, but could relate to the number of transactions processed per hour, the number of music downloads per hour, or number of customer queries handled per hour, all of which can be assigned a specific dollar amount for analysis.
It seemed that if I was going to explain why standardized benchmarks were relevant, I should find an analogy that has similar features to compare to. I thought about MPH, since it is based on time units like IOPS and MB/s, butdecided against it based on an earlier comment you made, Barry, about NASCAR:
Let's imagine that a Dodge Charger wins the overwhelming majority of NASCAR races. Would that prove that a stock Charger is the best car for driving to work, or for a cross-country trip?
Your comparison, Barry, to car-racing brings up three reasons why I felt MPH is a bad metric to use for an analogy:
Increasing MPH, and driving anywhere near the maximum rated MPH for a vehicle, can be reckless and dangerous,risking loss of human life and property damage. Even professional race car drivers will agree there are dangers involved. By contrast, processing I/O requests at maximum speed poses no additional risk to the data, nor possibledamage to any of the IT equipment involved.
While most vehicles have top speeds in excess of 100 miles per hour, most Federal, State and Local speed limits prevent anyone from taking advantage of those maximums. Race-car drivers in NASCAR may be able to take advantage of maximum MPH of a vehicle, the rest of us can't. The government limits speed of vehicles precisely because of the dangers mentioned in the previous bullet. In contrast, processing I/O requests at faster speeds poses no such dangers, so the government poses no limits.
Neither IOPS nor MB/s match MPH exactly.Earlier this week,I related IOPS to "Questions handled per hour" at the local public library, and MB/s to "Spoken words per minute" in those replies. If I tried to find a metric based on unit type to match the "per second" in IOPS and MB/s, then I would need to find a unit that equated to "I/O requests" or "MB transferred" rather than something related to "distance travelled".
In terms of time-based units, the closest I could come up with for IOPS was acceleration rate of zero-to-sixty MPH in a certain number of seconds. Speeding up to 60MPH, then slamming the breaks, and then back up to 60MPH, start-stop, start-stop, and so on, would reflect what IOPS is doing on a requestby request basis, but nobody drives like this (except maybe the taxi cab drivers here in Malaysia!)
Since vehicles are limited to speed limits in normal road conditions, the closest I could come up with for MB/s would be "passenger-miles per hour", such that high-occupancy vehicles like school buses could deliver more passengers than low-occupancy vehicles with only a few passengers.
Neither start-stops nor passenger-miles per hour have standardized benchmarks, so they don't work well for comparisonbetween vehicles.If you or anyone can come up with a metric that will help explain the relevance of standardized benchmarks better than the MPG that I already used, I would be interested in it.
You also mention, Barry, the term "efficiency" but mileage is about "fuel economy".Wikipedia is quick to point out that the fuel efficiency of petroleum engines has improved markedly in recent decades, this does not necessarily translate into fuel economy of cars. The same can be said about the performance of internal bandwidth ofthe backplane between controllers and faster HDD does not necessarily translate to external performance of the disk system as a whole. You correctly point this out in your blog about the DMX-4:
Complementing the 4Gb FC and FICON front-end support added to the DMX-3 at the end of 2006, the new 4Gb back-end allows the DMX-4 to support the latest in 4Gb FC disk drives.
You may have noticed that there weren't any specific performance claims attributed to the new 4Gb FC back-end. This wasn't an oversight, it is in fact intentional. The reality is that when it comes to massive-cache storage architectures, there really isn't that much of a difference between 2Gb/s transfer speeds and 4Gb/s.
Oh, and yes, it's true - the DMX-4 is not the first high-end storage array to ship a 4Gb/s FC back-end. The USP-V, announced way back in May, has that honor (but only if it meets the promised first shipments in July 2007). DMX-4 will be in August '07, so I guess that leaves the DS8000 a distant 3rd.
This also explains why the IBM DS8000, with its clever "Adaptive Replacement Cache" algorithm, has such highSPC-1 benchmarks despite the fact that it still uses 2Gbps drives inside. Given that it doesn't matter between2Gbps and 4Gbps on the back-end, why would it matter which vendor came first, second or third, and why call it a "distant 3rd" for IBM? How soon would IBM need to announce similar back-end support for it to be a "close 3rd" in your mind?
I'll wrap up with you're excellent comment that Watts per GB is a typical "green" metric. I strongly support the whole"green initiative" and I used "Watts per GB" last month to explain about how tape is less energy-consumptive than paper.I see on your blog you have used it yourself here:
The DMX-3 requires less Watts/GB in an apples-to-apples comparison of capacity and ports against both the USP and the DS8000, using the same exact disk drives
It is not clear if "requires less" means "slightly less" or "substantially less" in this context, and have no facts from my own folks within IBM to confirm or deny it. Given that tape is orders of magnitude less energy-consumptive than anything EMC manufacturers today, the point is probably moot.
I find it refreshing, nonetheless, to have agreed-upon "energy consumption" metrics to make such apples-to-apples comparisons between products from different storage vendors. This is exactly what customers want to do with performance as well, without necessarily having to run their own benchmarks or work with specific storage vendors. Of course, Watts/GB consumption varies by workload, so to make such comparisons truly apples-to-apples, you would need to run the same workload against both systems. Why not use the SPC-1 or SPC-2 benchmarks to measure the Watts/GB consumption? That way, EMC can publish the DMX performance numbers at the same time as the energy consumption numbers, and then HDS can follow suit for its USP-V.
I'm on my way back to the USA soon, but wanted to post this now so I can relax on the plane.
Last week, a writer for a magazine contacted us at IBM to confirm a quote that writing a Terabyte (TB) on disk saves 50,000 trees. I explained that this was cited from UC Berkeley's famousHow Much Information? 2003 study.
To be fair, the USA Today article explains that AT&T also offers "summary billing" as well as "on-line billing", but apparently neither of these are the default choice. I can understand that phone companies send out bills on paper because not everyone who has a phone has internet access, but in the case of its iPhone customers, internet access is in the palm of your hands! Since all iPhone customers have internet access, and AT&T knows which customers are using an iPhone, it would make sense for either on-line billing or summary billing to be the default choice, and let only those that hate trees explicitly request the full billing option.
Sending a box of 300 pages of printed paper is expensive, both for the sender and the recipient. This informationcould have been shipped less expensively on computer media, a single floppy diskette or CDrom for example. Forthose who prefer getting this level of detail, a searchable digitized version might be more useful to the consumer.
Which brings me to the concept of Information Lifecycle Management (ILM). You can read my recent posts on ILM byclicking the Lifecycle tab on the right panel, or my now infamous post from last year about ILM for my iPod.
His recollection of the history and evolution of ILM fairly matches mine:
The phrase "Information Lifecycle Management" was originally coined by StorageTek in early 1990s as a way to sell its tape systems into mainframe environments. Automated tape libraries eliminated most if not all of the concerns that disk-only vendors tout as the problem with manual tape. I began my IBM career in a product now called DFSMShsm which specifically moved data from disk to tape when it no longer needed the service level of disk. IBM had been delivering ILM offerings since the 1970s, so while StorageTek can't claim inventing the concept, we give them credit for giving it a catchy phrase.
EMC then started using the phrase four years ago in its marketing to sell its disk systems, including slower less-expensive SATA disk. The ILM concept helped EMC provide context for the many acquisitions of smaller companies that filled gaps in the EMC portfolio. Question: Why did EMC acquire company X? Answer: To be more like IBM and broaden its ILM solution portfolio.
Information Lifecycle Management is comprised of the policies, processes,practices, and tools used to align the business value of information with the mostappropriate and cost effective IT infrastructure from the time information isconceived through its final disposition. Information is aligned with businessrequirements through management policies and service levels associated withapplications, metadata, and data.
Whitepapers and other materials you might read from IBM, EMC, Sun/StorageTek, HP and others will all pretty much tell you what ILM is, consistent with this SNIA definition, why it is good for most companies, and how it is not just about buying disk and tape hardware. Software, services, and some discipline are needed to complete the implementation.
While the SNIA definition provides a vendor-independent platform to start the conversation, it can be intimidatingto some, and is difficult to memorize word for word.When I am briefing clients, especially high-level executives, they often ask for ILM to be explained in simpler terms. My simplified version is:
Information starts its life captured or entered as an "asset" ...
This asset can sometimes provide competitive advantage, or is just something needed for daily operations. Digital assets vary in business value in much the same way that other physical assets for a company might. Some assets might be declared a "necessary evil" like laptops, but are tracked to the n'th degree to ensure they are not lost, stolen or taken out of the building. Other assetsare declared "strategically important" but are readily discarded, or at least allowed to walk out the door each evening.
... then transitions into becoming just an "expense" ...
After 30-60 days, many of the pieces of information are kept around for a variety of reasons. However, if it isn'tneeded for daily operations, you might save some money moving it to less expensive storage media, throughless expensive SAN or LAN network gear, via less expensive host application servers. If you don't need instantaccess, then perhaps the 30 seconds or so to fetch it from much-less-expensive tape in an automated tape librarycould be a reasonable business trade-off.
... and ends up as a "liability".
Keeping data around too long can be a problem. In some cases, incriminating, and in other cases, just having toomuch data clogs up your datacenter arteries. If not handled properly within privacy guidelines, data potentially exposes sensitive personal or financial information of your employees and clients. Most regulations require certain data to be kept, in a manner protected against unexpected loss, unethical tampering, and unauthorized access, for a specific amount of time, after which it can be destroyed, deleted or shredded.
So ILM is not just a good idea to save a company money, it can keep them out of the court room, as well as help save the environment and not kill so many trees. Now that 100 percent of iPhone customers have internet access, and a goodnumber of non-iPhone customers have internet access at home, work, school or public library, it makes sense for companies to ask people to "opt-in" to getting their statements on paper, rather than forcing them to "opt-out".
I am back at "the Office" for a single day today. This happens often enough I need a name for it.Air Force pilots that practice landing and take-offs call them "Touch and Go", but I think I needsomething better. If you can think of a better phrase, let me know.
This week, I was in Hartford, CT, Somers, NY and our Corporate Headquarters in Armonk, in a varietyof meetings, some with editors of magazines, others with IBMers I have only spoken to over the phone andfinally got a chance to meet face to face.
I got back to Tucson last night, had meetings this morning in Second Life, then presented "InformationLifecycle Management" in Spanish to a group of customers from Mexico, Chile, and Brazil. We have a great Tucson Executive Briefing Center, and plenty of foreign-language speakers to draw from our localemployees here at the lab site.
Sunday, I leave for Las Vegas for our upcoming IBM Storage and Storage Networking Symposium. We will cover the latest in our disk, tape, storage networking and related software.Do you have your tickets? If you plan to attend, and want to meet up with me, let me know.