Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Yesterday's announcement that IBM had acquired XIV to offer storage for Web 2.0 applicationsprompted a lot of discussion in both the media and the blogosphere. Several indicated thatit was about time that one of the major vendors stepped forward to provide this, and it madesense that IBM, the leader in storage hardware marketshare, would be the first. Others were perhaps confused on what is unique with Web 2.0 applications. What has changed?
I'll use this graphic to help explain how we have transitioned through three eras of storage.
The first era: Server-centric
In the 1950s, IBM introduced both tape and disk systems into a very server-centric environment.Dumb terminals and dumb storage devices were managed entirely by the brains inside the server.These machines were designed for Online Transaction Processing (OLTP), everywhere from bookingflights on airlines to handling financial transfers.
The second era: Network-centric
In the 1980s and 1990s, dumb terminals were replaced with smarter workstations and personalcomputers; and dumb storage were replaced with smarter storage controllers. Local Area Networks (LANs)and Storage Area Networks (SANs) allowed more cooperative processing between users, servers andstorage. However, servers maintained their role as gatekeepers. Users had to go through aspecific server or server cluster to access the storage they had access to. These servers continuedtheir role in OLTP, but also manage informational databases, file sharing and web serving.
The third era: Information-centric
Today, we are entering a third era. Servers are no longer the gatekeepers. Smart workstationsand personal computers are now supplemented with even more intelligent handheld devices, Blackberryand iPhones, for example. Storage is more intelligent too, with some being able to offer file sharingand web serving directly, without the need of an intervening server. The roles of servers have changed,from gatekeepers, to ones that focuses on crunching the numbers, and making information presentableand useful.
Here is where Web 2.0 applications, digital media and archives fits in. These are focused on unstructured data that don't require relational database management systems. So long as the useris authorized, subscribed and/or has made the appropriate payment, she can access the information. With the appropriate schemes in place, information can now be mashed-up in a variety of ways, combined with other information that can render insights and help drive new innovations.
Of course, we will still have databases and online transaction processing to book our flights andtransfer our funds, but this new era brings in new requirements for information storage, and newarchitectures that help optimize this new approach.
In case you haven't noticed, IBM System Storage makes most of their announcements on Tuesdays. IBM announced a lot today, so here is a quick run-down.
Cisco storage networking products
IBM continues to resell Cisco switches and directors, but now can offer these with a 1-year IBM warranty.
The entry-level Cisco 9124offers 8 to 24 ports. For IBM BladeCenter, IBM now offers the Cisco10-port and 20-port modules that slide into the back of the chassis, and are functionally equivalent to the 9124.The original BladeCenter came with a 16-port module with 14 internal, but only 2 external, which severely hamperedbandwidth connectivity to external storage. These new modules provide more external ports to relieve that constraint.
The midrange Cisco9200switches have two models, both with 16 fixed ports, with the option for a blade that can provide 12, 24 or 48 additional ports. The 9216A has 16 FCP ports, and the 9216i has 14 FCP ports, and 2 GbE ports to act as a router, such as toconnect to a remote location for business continuity using Metro Mirror or Global Mirror.
The enterprise-class Cisco 9500directors can support up to 528 ports.
TS3400 Tape Library
The new TS3400library is a small entry-level size library, supporting the enterprise-class TS1120 drive, providing interoperabilitywith the larger tape libraries, with all the support for tape encryption.
In addition to Linux, Unix, and WIndows, the TS1120 can now be connected to System i servers. In the past, the only IBMtape available to System i were the LTO models. There are a lot of businesses that need to comply with government regulations that are looking for tape encryption, and now IBM has made it accessible to more clients.
300GB drives at 15K RPM
The DS8000 can now support new drives with 300GB capacity at 15,000 RPM (15K). These can be up to 30 percent faster than the 10,000 RPM drives for typical workloads.
IBM continues its market leadership with these new set of features and offerings!
Well, this week I am in Maryland, just outside of Washington DC. It's a bit cold here.
Robin Harris over at StorageMojo put out this Open Letter to Seagate, Hitachi GST, EMC, HP, NetApp, IBM and Sun about the results of two academic papers, one from Google, and another from Carnegie Mellon University (CMU). The papers imply that the disk drive module (DDM) manufacturers have perhaps misrepresented their reliability estimates, and asks major vendors to respond. So far, NetAppand EMC have responded.
I will not bother to re-iterate or repeat what others have said already, but make just a few points. Robin, you are free to consider this "my" official response if you like to post it on your blog, or point to mine, whatever is easier for you. Given that IBM no longer manufacturers the DDMs we use inside our disk systems, there may not be any reason for a more formal response.
Coke and Pepsi buy sugar, Nutrasweet and Splenda from the same sources
Somehow, this doesn't surprise anyone. Coke and Pepsi don't own their own sugar cane fields, and even their bottlers are separate companies. Their job is to assemble the components using super-secret recipes to make something that tastes good.
IBM, EMC and NetApp don't make DDMs that are mentioned in either academic study. Different IBM storage systems uses one or more of the following DDM suppliers:
Seagate (including Maxstor they acquired)
Hitachi Global Storage Technologies, HGST (former IBM division sold off to Hitachi)
In the past, corporations like IBM was very "vertically-integrated", making every component of every system delivered.IBM was the first to bring disk systems to market, and led the major enhancements that exist in nearly all disk drives manufactured today. Today, however, our value-add is to take standard components, and use our super-secret recipe to make something that provides unique value to the marketplace. Not surprisingly, EMC, HP, Sun and NetApp also don't make their own DDMs. Hitachi is perhaps the last major disk systems vendor that also has a DDM manufacturing division.
So, my point is that disk systems are the next layer up. Everyone knows that individual components fail. Unlike CPUs or Memory, disks actually have moving parts, so you would expect them to fail more often compared to just "chips".
If you don't feel the MTBF or AFR estimates posted by these suppliers are valid, go after them, not the disk systems vendors that use their supplies. While IBM does qualify DDM suppliers for each purpose, we are basically purchasing them from the same major vendors as all of our competitors. I suspect you won't get much more than the responses you posted from Seagate and HGST.
American car owners replace their cars every 59 months
According to a frequently cited auto market research firm, the average time before the original owner transfers their vehicle -- purchased or leased -- is currently 59 months.Both studies mention that customers have a different "definition" of failure than manufacturers, and often replace the drives before they are completely kaput. The same is true for cars. Americans give various reasons why they trade in their less-than-five-year cars for newer models. Disk technologies advance at a faster pace, so it makes sense to change drives for other business reasons, for speed and capacity improvements, lower power consumption, and so on.
The CMU study indicated that 43 percent of drives were replaced before they were completely dead.So, if General Motors estimated their cars lasted 9 years, and Toyota estimated 11 years, people still replace them sooner, for other reasons.
At IBM, we remind people that "data outlives the media". True for disk, and true for tape. Neither is "permanent storage", but rather a temporary resting point until the data is transferred to the next media. For this reason, IBM is focused on solutions and disk systems that plan for this inevitable migration process. IBM System Storage SAN Volume Controller is able to move active data from one disk system to another; IBM Tivoli Storage Manager is able to move backup copies from one tape to another; and IBM System Storage DR550 is able to move archive copies from disk and tape to newer disk and tape.
If you had only one car, then having that one and only vehicle die could be quite disrupting. However, companies that have fleet cars, like Hertz Car Rentals, don't wait for their cars to completely stop running either, they replace them well before that happens. For a large company with a large fleet of cars, regularly scheduled replacement is just part of doing business.
This brings us to the subject of RAID. No question that RAID 5 provides better reliability than having just a bunch of disks (JBOD). Certainly, three copies of data across separate disks, a variation of RAID 1, will provide even more protection, but for a price.
Robin mentions the "Auto-correlation" effect. Disk failures bunch up, so one recent failure might mean another DDM, somewhere in the environment, will probably fail soon also. For it to make a difference, it would (a) have to be a DDM in the same RAID 5 rank, and (b) have to occur during the time the first drive is being rebuilt to a spare volume.
The human body replaces skin cells every day
So there are individual DDMs, manufactured by the suppliers above; disk systems, manufactured by IBM and others, and then your entire IT infrastructure. Beyond the disk system, you probably have redundant fabrics, clustered servers and multiple data paths, because eventually hardware fails.
People might realize that the human body replaces skin cells every day. Other cells are replaced frequently, within seven days, and others less frequently, taking a year or so to be replaced. I'm over 40 years old, but most of my cells are less than 9 years old. This is possible because information, data in the form of DNA, is moved from old cells to new cells, keeping the infrastructure (my body) alive.
Our clients should approach this in a more holistic view. You will replace disks in less than 3-5 years. While tape cartridges can retain their data for 20 years, most people change their tape drives every 7-9 years, and so tape data needs to be moved from old to new cartridges. Focus on your information, not individual DDMs.
What does this mean for DDM failures. When it happens, the disk system re-routes requests to a spare disk, rebuilding the data from RAID 5 parity, giving storage admins time to replace the failed unit. During the few hours this process takes place, you are either taking a backup, or crossing your fingers.Note: for RAID5 the time to rebuild is proportional to the number of disks in the rank, so smaller ranks can be rebuilt faster than larger ranks. To make matters worse, the slower RPM speeds and higher capacities of ATA disks means that the rebuild process could take longer than smaller capacity, higher speed FC/SCSI disk.
According to the Google study, a large portion of the DDM replacements had no SMART errors to warn that it was going to happen. To protect your infrastructure, you need to make sure you have current backups of all your data. IBM TotalStorage Productivity Center can help identify all the data that is "at risk", those files that have no backup, no copy, and no current backup since the file was most recently changed. A well-run shop keeps their "at risk" files below 3 percent.
So, where does that leave us?
ATA drives are probably as reliable as FC/SCSI disk. Customers should chose which to use based on performance and workload characteristics. FC/SCSI drives are more expensive because they are designed to run at faster speeds, required by some enterprises for some workloads. IBM offers both, and has tools to help estimate which products are the best match to your requirements.
RAID 5 is just one of the many choices of trade-offs between cost and protection of data. For some data, JBOD might be enough. For other data that is more mission critical, you might choose keeping two or three copies. Data protection is more than just using RAID, you need to also consider point-in-time copies, synchronous or asynchronous disk mirroring, continuous data protection (CDP), and backup to tape media. IBM can help show you how.
Disk systems, and IT environments in general, are higher-level concepts to transcend the failures of individual components. DDM components will fail. Cache memory will fail. CPUs will fail. Choose a disk systems vendor that combines technologies in unique and innovative ways that take these possibilities into account, designed for no single point of failure, and no single point of repair.
So, Robin, from IBM's perspective, our hands are clean. Thank you for bringing this to our attention and for giving me the opportunity to highlight IBM's superiority at the systems level.
Many people have asked me if there was any logic with the IBM naming convention of IBM Systems branded servers. Here's your quick and easy cheat sheet:
System x -- "x" for cross-platform architecture. Technologies from our mainframe and UNIX servers were brought into chips that sit next to the Intel or AMD processors to provide a more reliable x86 server experience. For example, some models have a POWER processor-based Remote Supervisor Adapter (RSA).
System p -- "p" for POWER architecture.
System z -- "z" for Zero-downtime, zero-exposures. Our lawyers prefer "near-zero", but this is about as close as you get to ["six-nines" availability] in our industry, with the highest level of security and encryption, no other vendor comes close, so you get the idea.
But what about the "i" for System i? Officially, it stands for "Integrated" in that it could integrate different applications running on different operating systems onto a [COMMON] platform. Options were available to insert Intel-based processor cards that ran Windows, or attach special cables that allowed separate System x servers running Windows to attach to a System i. Both allowed Windows applications to share the internal LAN and SAN inside the System i machine. Later, IBM allowed [AIX on System i] and [Linux on Power] operating systems to run as well.
From a storage perspective, we often joked that the "i" stood for "island", as most System i machines used internal disk, or attached externally to only a fewselected models of disk from IBM and EMC that had special support for i5/OS using a special, non-standard 520-byte disk block size. This meant only our popular IBM System Storage DS6000 and DS8000 series disk systems were available. This block size requirement only applies to disk. For tape, i5/OS supports both IBM TS1120 and LTO tape systems. For the most part,System i machines stood separate from the mainframe, and the rest of the Linux, UNIX and Windows distributed serverson the data center floor.
Often, when I am talking to customers, they ask when will product xyz be supported on System z or System i?I explained that IBM's strategy is not to make all storage devices connect via ESCON/FICON or support non-standard block sizes, but rather to get the servers to use standard 512-byte block size, Fibre Channel and other standard protocols.(The old adage applies: If you can't get Mohamed to move to the mountain, get the mountain to move to Mohamed).
On the System z mainframe, we are 60 percent there, allowing three of the five operating systems (z/VM, z/VSE and Linux) to access FCP-based disk and tape devices. (Four out of six if you include [OpenSolaris for the mainframe])But what about System i? As the characters on the popular television show [LOST] would say: It's time to get off the island!
Last week, IBM announced the new [i5/OS V6R1 operating system] with features that will greatly improve the use of external storage on this platform. Check this out:
POWER6-based System i 570 model server
Our latest, most powerful POWER processor brought to the System i platform. The 570 model will be the first in the System i family of servers to make use of new processing technology, using up to 16 (sixteen!) POWER6 processors (running at 4.7GHZ) in each machine.The advantage of the new processors is the increased commercial processing workload (CPW) rating, 31 percent greater than the POWER5+ version and 72 percent greater than the POWER5 version. CPW is the "MIPS" or "TeraFlops" rating for comparing System i servers.Here is the[Announcement Letter].
Fibre Channel Adapter for System i hardware
That's right, these are [Smart IOAs], so an I/O Processor (IOP) is no longer required! You can even boot the Initial Program Load (IPL) direclty from SAN-attached tape.This brings System i to the 21st century for Business Continuity options.
Virtual I/O Server (VIOS)
[VirtualI/O Server] has been around for System p machines, but now available on System i as well. This allows multiplelogical partitions (LPARs) to access resources like Ethernet cards and FCP host bus adapters. In the case of storage, the VIOS handles the 520-byte to 512-byte conversion, so that i5/OS systems can now read and write to standard FCP devices like the IBM System Storage DS4800 and DS4700 disk systems.
IBM System Storage DS4000 series
Initially, we have certified DS4700 and DS4800 disk systems to work with i5/OS, but more devices are in plan.This means that you can now share your DS4700 between i5/OS and your other Linux, UNIX and Windowsservers, take advantage of a mix of FC and SATA disk capacities, RAID6 protection, and so on.
To call [IBM PowerVM] the "VMware for the POWER architecture" would not do it quite justice. In combination with VIOS, IBM PowerVM is able to run a variety of AIX, Linux and i5/OS guest images.The "Live Partition Mobility" feature allows you to easily move guest images from one system to another, while they are running, just like VMotion for x86 machines.
And while we are on the topic of x86, PowerVM is also able to represent a Linux-x86 emulation base to run x86-compiled applications. While many Linux applications could be re-complied from source code for the POWER architecture "as is", others required perhaps 1-2 percent modification to port them over, and that was too much for some software development houses. Now, we can run most x86-compiled Linux application binaries in their original form on POWER architecture servers.
BladeCenter JS22 Express
The POWER6-based [JS22 Express blade] can run i5/OS, taking advantage of PowerVM and VIOS to access all of the BladeCenterresources. The BladeCenter lets you mix and match POWER and x86-based blades in the same chassis, providing theultimate in flexibility.
While most of the post is accurate and well-stated, two opinions particular caught my eye. I'll be nice and call them opinions, since these are blogs, and always subject to interpretation. I'll put quotes around them so that people will correctly relate these to Hu, and not me.
"Storage virtualization can only be done in a storage controller. Currently Hitachi is the only vendor to provide this." -- Hu Yoshida
Hu, I enjoy all of your blog entries, but you should know better. HDS is fairly new-comer to the storage virtualization arena, so since IBM has been doing this for decades, I will bring you and the rest of the readers up to speed. I am not starting a blog-fight, just want to provide some additional information for clients to consider when making choices in the marketplace.
First, let's clarify the terminology. I will use 'storage' in the broad sense, including anything that can hold 1's and 0's, including memory, spinning disk media, and plastic tape media. These all have different mechanisms and access methods, based on their physical geometry and characteristics. The concept of 'virtualization' is any technology that makes one set of resources look like another set of resources with more preferable characteristics, and this applies to storage as well as servers and networks. Finally, 'storage controller' is any device with the intelligence to talk to a server and handle its read and write requests.
Second, let's take a look at all the different flavors of storage virtualization that IBM has developed over the past 30 years.
IBM introduces the S/370 with the OS/VS1 operating system. "VS" here refers to virtual storage, and in this case internal server memory was swapped out to physical disk. Using a table mapping, disk was made to look like an extension of main memory.
IBM introduces the IBM 3850 Mass Storage System (MSS). Until this time, programs that ran on mainframes had to be acutely aware of the device types being written, as each device type had different block, track and cylinder sizes, so a program written for one device type would have to be modified to work with a different device type. The MSS was able to take four 3350 disks, and a lot of tapes, and make them look like older 3330 disks, since most programs were still written for the 3330 format. The MSS was a way to deliver new 3350 disk to a 3330-oriented ecosystem, and greatly reduce the cost by handling tape on the back end. The table mapping was one virtual 3330 disk (100 MB) to two physical tapes (50 MB each). Back then, all of the mainframe disk systems had separate controllers. The 3850 used a 3831 controller that talked to the servers.
IBM invents Redundant Array of Independent Disk (RAID) technology. The table mapping is one or more virtual "Logical Units" (or "LUNs") to two or more physical disks. Data is striped, mirrored and paritied across the physical drives, making the LUNs look and feel like disks, but with faster performance and higher reliability than the physical drives they were mapped to. RAID could be implemented in the server as software, on top or embedded into the operating system, in the host bus adapter, or on the controller itself. The vendor that provided the RAID software or HBA did not have to be the same as the vendor that provided the disk, so in a sense, this avoided "vendor lock-in".Today, RAID is almost always done in the external storage controller.
IBM introduces the Personal Computer. One of the features of DOS is the ability to make a "RAM drive". This is technology that runs in the operating system to make internal memory look and feel like an external drive letter. Applications that already knew how to read and write to drive letters could work unmodified with these new RAM drives. This had the advantage that the files would be erased when the system was turned off, so it was perfect for temporary files. Of course, other operating systems today have this feature, UNIX has a /tmp directory in memory, and z/OS uses VIO storage pools.
This is important, as memory would be made to look like disk externally, as "cache", in the 1990s.
IBM AIX v3 introduces Logical Volume Manager (LVM). LVM maps the LUNs from external RAID controllers into virtual disks inside the UNIX server. The mapping can combine the capacity of multiple physical LUNs into a large internal volume. This was all done by software within the server, completely independent of the storage vendor, so again no lock-in.
IBM introduces the Virtual Tape Server (VTS). This was a disk array that emulated a tape library. A mapping of virtual tapes to physical tapes was done to allow full utilization of larger and larger tape cartridges. While many people today mistakenly equate "storage virtualization" with "disk virtualization", in reality it can be implemented on other forms of storage. The disk array was referred to as the "Tape Volume Cache". By using disk, the VTS could mount an empty "scratch" tape instantaneously, since no physical tape had to be mounted for this purpose.
Contradicting its "tape is dead" mantra, EMC later developed its CLARiiON disk library that emulates a virtual tape library (VTL).
IBM introduces the SAN Volume Controller. It involves mapping virtual disks to manage disks that could be from different frames from different vendors. Like other controllers, the SVC has multiple processors and cache memory, with the intelligence to talk to servers, and is similar in functionality to the controller components you might find inside monolithic "controller+disk" configurations like the IBM DS8300, EMC Symmetrix, or HDS TagmaStore USP. SVC can map the virtual disk to physical disk one-for-one in "image mode", as HDS does, or can also map virtual disks across physical managed disks, using a similar mapping table, to provide advantages like performance improvement through striping. You can take any virtual disk out of the SVC system simply by migrating it back to "image mode" and disconnecting the LUN from management. Again, no vendor lock-in.
The HDS USP and NSC can run as regular disk systems without virtualization, or the virtualization can be enabled to allow external disks from other vendors. HDS usually counts all USP and NSC sold, but never mention what percentage these have external disks attached in virtualization mode. Either they don't track this, or too embarrassed to publish the number. (My guess: single digit percentage).
Few people remember that IBM also introduced virtualization in both controller+disk and SAN switch form factors. The controller+disk version was called "SAN Integration Server", but people didn't like the "vendor lock-in" having to buy the internal disk from IBM. They preferred having it all external disk, with plenty of vendor choices. This is perhaps why Hitachi now offers a disk-less version of the NSC 55, in an attempt to be more like IBM's SVC.
IBM also had introduced the IBM SVC for Cisco 9000 blade. Our clients didn't want to upgrade their SAN switch networking gear just to get the benefits of disk virtualization. Perhaps this is the same reason EMC has done so poorly with its "Invista" offering.
So, bottom line, storage virtualization can, and has, been delivered in the operating system software, in the server's host bus adapter, inside SAN switches, and in storage controllers. It can be delivered anywhere in the path between application and physical media. Today, the two major vendors that provide disk virtualization "in the storage controller" are IBM and HDS, and the three major vendors that provide tape virtualization "in the storage controller" are IBM, Sun/STK, and EMC. All of these involve a mapping of logical to physical resources. Hitachi uses a one-for-one mapping, whereas IBM additionally offers more sophisticated mappings as well.
Well, I'm going to take a two week break from blogging. Not because my clarification of storage terminology got me Marc Farley's finger wagging of shame.
No, I'm going on vacation.I'll be going to a third-world country, possibly outside the reaches of cell phones, e-mail and the internet, so I won't be blogging until I get back later this month. Since Clark Hodge has discovered a pattern that I am suspiciously close to massive power failures, I think it best not to tell people exactly where I am going.
So, until I get back, I leave you with a nice piece from Kirby at Storage Sanity who has discovered that IBMers are very nice.
Yesterday, I promised I would cover other products from the Feb 12 announcement. Today I will focus on the IBM SAN768B director. Some people are confused on the differences between switchesand directors. I find there are three key differences:
Directors are designed to be 24x7 operation, highly available with no single points of failure or repair. Generally, all components in directors are redundant and hot-swappable, including Control Processors. In switches, some components are redundant and hot-swappable, such as fans and power supplies), but not the “motherboard” or controller. Often you have to take down a switch to make firmware or major hardware changes or upgrades.
Directors are designed to take in "blades" with different features, port counts, or protocol capabilities. You can add or remove blades while the system is up and running. Switches have a fixed number of ports. (A Small Form-factor Pluggable optical transceiver [SFP] is the component that turns electric pulses into light pulses (and visa versa). You plug the SFP into the switch, and then the fiber optic cable is plugged into the SFP).
With switches, you often start with a base number of active ports, and then can enable the rest of the ports as you need them.
Directors have hundreds of ports. Switches tend to have 64 ports or less.
Last year, Brocade acquired McDATA. Both were OEMs for IBM, and IBM distinguished that in the naming convention. The IBM SAN***B name was used to denote products manufactured for IBM by Brocade, and a SAN***M name was used to denote products manufactured by McDATA.
At that time, Brocade and McDATA equipment did not mix very well on the same fabric, so IBM retained the naming convention so that you as a customer knew what it worked with.
Brocade now has released with new levels of both operating systems--Brocade's FOS and McDATA's EOS--and their respective fabric managers--Brocade Fabric Manager (FM) and McDATA's Enterprise Fabric Connectivity Manager (EFCM)--so that they have full interoperability.
Brocade's goal is to enhance EFCM to be a common software management platform for all of their products going forward.
IBM used the maximum port count in the name to provide some clue as to the size of the switch or director. The SAN16B-2 or the SAN32B-3 are switches that have a maximum of 16 and 32 ports. The SAN256B supports a maximumeight blades of your choosing.Two different types were supported for FC ports, a 16-port blade and a 32-port blade.If all eight were 32-port blades then the maximum was 256 ports, hence the name. But then Brocade began offering 48-port blades. Should IBM change the name? No, it decided to leave itthe SAN256B even though it can now have a maximum of 384 ports.
Not to confuse anyone, the SAN768B also has a maximum of 384 ports, in the same 14U dimensions, but with a special twist. Normally to connect two directors together you use up ports from each, in what are called "inter-switch links" (ISL).These are ports you are taking away from availability from the servers and storage controllers. The SAN768Boffers a new alternative called "inter-chassis links". Each SAN768B has two processing blades, and each has two ICL ports, so with just four two-meter (2m) cables, you get the equivalent of 128 FC 8 Gbps ISL links without using 128 individual ports on each side. That is like giving you 256 ports back for use with servers and storage!
Since IBM directors require 240 volt power, IBM TotalStorage SAN Cabinet C36 include power distribution units (PDUs). PDUs are just glorified power strips, but a new intelligent PDU (iPDU) option introduces additional intelligence to monitor energy consumption for customers looking to measure, and perhaps charge back, energy consumption to the rest of the business. You can stack two SAN768B in one cabinet, one on top of the other, and connected via ICLs, it wouldlook like one huge 768-port backbone.
As a backbone for your data center, the SAN768B is positioned for two emerging technologies:
8 Gbps Fibre Channel (FC)
The SAN768B is powerful enough to have 32-port blades run full speed on all ports off-blade without oversubscription. Oversubscription is an emotional topic.
Normally, blades (like switches) can handle all traffic at full speed without delays provided the in-bound and out-bound ports involved are all on the same blade. In a director, however, if you need to communicate from a port on one blade to a port on a different blade, it is possible that off-blade traffic might be constrained or delayed in its transit across the backplane.
On the SAN768B, both the 16-port and 32-port blades can run at full 8 Gbps speed, and the 48-port is exposed to oversubscription only if you have more than 32-ports running at full 8 Gbps transferring data off-blade concurrently.
The new 8 Gbps SFPs support auto-negotiation at N-1 and N-2 generation link speeds. This means that they will automatically slow down when communicating with 4Gpbs and 2 Gbps devices, but they cannot communicate with 1 Gbps devices. If you are still using 1 Gbps devices in your data center, you will need to use 4 Gbps SFPs (which also support 2 Gbps and 1 Gbps link speeds) to communicate with those older devices.
Basically, this new technology enables transport of Fibre Channel packets over 10 Gbps Ethernet links. This 10 Gbps Ethernet can also be used to carry traditional iSCSI and TCP/IP traffic. FCoE introduces new extensions to provide Fibre Channel characteristics, like being lossless, and offering consistent performance. The ANSI T11 team is driving FCoE as an open standard, and at the moment it is not fully baked. I suggest you don't buy any FCoE equipment prematurely, as pre-standard devices or host bus adapters could get you burned later when the standard is finalized.
The idea is that FCoE blades can be installed in a SAN768B along with traditional FC blades, allowing routing of traffic between traditional FC and new FCoE ports. Those who have invested in FCIP for long distance replication will be able to continue using either FC or FCoE inputs.
One of the big drivers of FCoE is IBM BladeCenter. Currently, most BladeCenter blades support both Ethernet and FC connectivity and are connected to both Ethernet and FC switches on the back of each BladeCenter chassis. With FCoE, we have the potential to run both FC and IP traffic across simpler all-Ethernet blades, connecting through all-Ethernet switches on the backs of each chassis.
For more information on the IBM SAN768B, see the [IBM Press Release]. For more detailson Brocade's strategy, here is an 8-page white paper on their[Data Center Fabric] vision.
Well, it's Tuesday again, and that means IBM announcements! Today we had a major launch, with so many products, services and offerings
that I can't fit them all into a single post, so I will split them up into several posts to give the attention they deserve. So, in this
post, I will focus on just the networking gear.
IBM Converged Switch B32
The "Converged" part of this switch refers to Converged Enhanced Ethernet (CEE), which is just a lossless Ethernet that meets certain standards to allow Fibre Channel over Ethernet (FCoE) that are still being discussed between Brocade and Cisco. Thankfully, IBM demanded both Brocade and Cisco stick to open agreed-upon standards, and the rest of the world gets to benefit from IBM's leadership in keeping everything as open and non-proprietary as possible.
The B32 ("B" because it was made by Brocade) starts with 24 10Gb Converged Enhanced Ethernet (CEE) ports, and then you can add eight Fibre Channel ports, for a total of 32 ports, hence the name B32. These are designed to be Top-of-Rack (TOR) switches. Basically, instead of having expensive optical cables for Ethernet and/or Fibre Channel out of each server, you have cheap twinax copper cables connecting the server's Converged Network Adapters (CNA) to this TOR switch, and then you can have the 10Gb Ethernet go to your regular Ethernet LAN, and your 8Gbps FC traffic go to your regular FC SAN. In other words, the CNA serves both the role of an Ethernet Network Interface Card (NIC) as well as a Fibre Channel Host Bus Adapter (HBA) card.
(You might see 8Gbps Fibre Channel represented as 8/4/2 or 2/4/8, this is just to remind you that these 8Gb FC ports can auto-negotiate down to 2Gbps and 4Gbps legacy hardware, but not 1Gbps. If you are still using 1Gbps FC, you need 4Gpbs SFP transceivers instead, shown often as 1/2/4 or 4/2/1.)
New SSN-16 module for Cisco directors and switches
When I present SAN gear to sales reps, I often get the question, "What is the difference between a switch and a director?" My quick and simple answer is that switches have fixed ports, but directors have slots that you can slide in different blades or expansion modules. The Cisco MDS9500 series are directors with slots, the three models provide a hint to their capacity. The last two digits represent the number of total slots, but the first two slots are already taken. In other words, model 9513 has 11 slots, model 9509 has seven slots, and model 9506 has four slots. You can have a 48-port blade in a slot, so in theory, you can have a maximum of 528 ports on the biggest model 9513.
However, if you want FCIP for disaster recovery, or I/O Acceleration (IOA) for remote e-vaulting tape libraries, you need a special 18/4 blade. This has 18 FC ports, four 1GbE ports and a special service processor that speaks FCIP or IOA. If you wanted two service processors for FCIP and two for IOA, you would need four of these blades, and that takes up slots that could have been used for 48-port blades instead. The solution? The new SSN-16 has sixteen 1GbE ports and four service processors, so with one slot, you can handle the FCIP and IOA processing that you previously used four cards, giving you three slots back to use with higher port-density cards.
Even better, you can put this new SSN-16 in the Cisco 9222i. The model 9222i is a "hybrid" switch with 22 fixed ports (18 FC ports, four fixed 1GbE ports, and a service processor, so basically the fixed port version of the 18/4 blade above), but it also has one slot! That one slot can be used for the SSN-16 to give you added FCIP or IOA capability.
For our mainframe clients, the FICON package includes four 24-port FICON blades and 96 SFP 4Gbps transceivers to fully populate them. Here is the IBM [Press Release].
Cisco Nexus 5000 series for IBM System Storage
The Cisco Nexus 5000 series is Cisco's entry into the Converged Enhanced Ethernet world, although Cisco sometimes refers to this as Data Center Ethernet (DCE), IBM will continue to use CEE when referring to either Brocade and Cisco gear. These are also Top-of-Rack aggregators that support CNA connections over cheaper twinax copper wires. Model 5010 has 10 ports that can be configured for either 1GbE or 10Gb CEE, 10 ports that are 10Gb CEE, and a slot for an expansion module. The Model 5020 has basically twice as much of everything, including two slots instead of one. Since 10Gb Ethernet does not auto-negotiate down to 1GbE, half the ports can be configured to run 1GbE instead. Frankly, that can be seen as wasting your precious Nexus ports with 1GbE connections, so you might find a 1GbE-to-10GbE aggregator that combines a dozen or more 1GbE to a few 10GbE links instead.
Today's announcement is that in addition to 10GbE and 4Gbps FC expansion modules, there is now an expansion module that supports 8Gbps Fibre Channel. Here is the IBM [Press Release].
Whether you choose Brocade or Cisco, nearly all of IBM System Storage disk and tape products can work today with Converged Enhanced Ethernet environments, either directly using iSCSI, NFS or CIFS, or using the FCoE methodology.
As you can see, it took me a whole post just to cover just our networking gear announcements, and I haven't even covered our disk, tape and cloud storage offerings. I'll get to these in later posts.
Special thanks to Anthony Vandewerdt, who sent me his version of this presentation that he planned to present in Australia next week. I "smartened it up" (or whatever the appropriate phrase is the opposite of "dumbed it down") for the technical audience.
Recovery procedures for single and double drive failures. A double drive failure on an XIV typically involves less recovery effort than traditional RAID5-based disk systems, and in many cases results in no data loss whatsoever. I provided details on this in my blog post [Double Drive Failure Debunked: XIV Two Years Later], so no need to repeat myself here.
Replacing the Automatic Transfer Switch (ATS) non-disruptively. To support either single-phase and triple-phase power sources, the XIV uses an ATS to take two independent power feeds, and distribute this out to the three Uninterruptible Power Supplies (UPS).
Built-in Migration capability to copy data off other disk systems over to the XIV.
Configuring Synchronous and Asynchronous mirroring using either the Fibre Channel or Internet Protocol ports.
Optimizing the use of XIV for VMware, AIX and other operating systems.
The IBM XIV Storage System is quite popular in New Zealand, with four times more boxes sold per capita than the other countries in the Asia Pacific region. I covered both the A14 model as well as the new Gen3 model.
Business Continuity/Disaster Recovery (BC/DR) Update: Lessons, Planning, Solutions
My colleague Vic Peltz from IBM Almaden presented on lessons learned from Hurricane Katrina and various other natural disasters. Unlike tradtional presentations the focus on technology, Vic took a different approach, focusing on people and procedures. I was here last year when the earthquake hit Christchurch on the south island, so I was well aware that BC/DR was top of mind for many of the attendees. Throughout this week, I have felt tremors, and many of the locals told me that these happen all the time.
Introduction to IBM Storwize V7000
I knew I was in trouble when the request for me to present Storwize sounded like something from [Mission Impossible]:
"Good morning, Mr. Pearson. Your mission, should you choose to accept it, involves presenting Storwize V7000 in Auckland, New Zealand. You may also present the Storwize V7000 Unified, but it is essential that you not cover the SAN Volume Controller or SONAS products from which they are based upon, as you will not have enough time. The audience is very technical, so be careful. As always, should any questions come up that you cannot answer, the conference coordinators will disavow all knowledge of your actions, nor reimburse your laundry charges. This message will self-destruct in five seconds."
Well, I accomplished my mission in 75 minutes. I was able to cover the block-only version of the IBM Storwize V7000, with support for clustering the control enclosures, expansion drawers and external storage virtualization. I then spent a few minutes on the block-and-file Storwize V7000 Unified, which adds support for CIFS, NFS, HTTPS, FTP and SCP protocols through two new "file modules", with integrated support for backup and anti-virus checking. I covered both IBM Easy Tier for sub-LUN automated tiering between Solid-State Drives (SSD) and spinning disk, as well as Active Cloud Engine for file-based movement between disk and tape.
The keynote was led by Phil Tasker, IBM Business Unit Executive (BUE) for STG Education Programs in Growth Markets, then Joe Screnci, head of IBM Storage Sales for Australia. IBM is in the Top 10 Training Hall of Fame, and conducts over 40,000 classes worldwide, resulting in over 1.3 million student days of instructions. IBM Systems Lab and Training technical hosts over three dozen conferences like this one every year.
Next was Clod Barrera, Distinguished Engineer and Chief Technical Strategist for the IBM System Storage product line. He covered future trends in storage as they relate to IBM's Smarter COmputing initiative.
Storage for the Clouds
Clod Barrera presented this break-out session on Cloud Storage. He covered why clouds matter, the various types and purposes of cloud, technology and architectures, and where IBM is headed to support this trend.
Storage for Cloud computing was $1 Billion USD business in 2010, and is expected to grow 32 percent CAGR through, compared to 3.8 percent for non-cloud storage. Clod estimates that 10 to 15 percent of all storage will be in cloud deployments by 2015. Of this storage, analysts expect 50 percent in private clouds, and the other 50 percent in public clouds. For private clouds, clients are looking to "Cloudify" their existing IT infrastructures. For public clouds, the projects are mostly green field.
IBM is also looking to the "arms dealer" of choice for Telcos and other companies looking to launch their own Cloud Services. IBM has a Cloud Services Provider Platform (CSP2) specifically to provide all the tools and technologies needed to make this possible.
Last month, IBM launched several new solutions for Cloud. The IBM Starter Kit for Cloud will help existing IT environments adopt cloud technologies. The IBM Service Agility Accelerator for Cloud is available for more advanced deployments. IBM Service Delivery Manager (ISDM) integrates a collection of software to provide complete integrated service management. IBM CloudBurst provides an integrated hardware-and-software stack for both x86 and POWER chipsets.
Multi-tenancy is also a big issue, and this varies depending on deployment model: IaaS, PaaS, or SaaS. Multi-tenancy is needed to help divide up management tasks, and to ensure that shared resources are paid for and meet SLA requirements accordingly.
Clod feels there are good reasons to use high performance, transactional SAN storage for VMware environments, versus NAS which many people consider simpler to deploy. IBM is also active in open standards, including SNIA's Cloud Data Management Interface [CDMI].
Journey to the Private Cloud
Gary Luke from Brocade provided this session on IBM's SAN384B-2 and SAN768B-2 SAN directors. Brocade is one of IBM's suppliers for SAN switches, and thanks to TRILL being adopted last August by IETF, supports multi-hop FCoE configurations! However, Gary did not talk about FCoE, but rather native FCP and FICON support in these new directors.
According to VMware, only 30 percent of x86 workloads are virtualized by any hypervisor. Gary feels that server virtualization and the use of Solid-State Drives (SSD) in disk arrays are driving existing 8 Gbps SAN to upgrade to 16 Gbps. Gary feels that Fibre-Channel based SANs are best positioned to handle unpredictable peaks in a 24-by-7 world.
The SAN384B-2 can house up to 256 ports (8 Gbps) or 192 ports (16 Gbps) in four slots, 9U chassis. The SAN768B-2 can handle twice these, in a 12U chassis. The nice thing about the 16Gbps ports is that they can auto-negotiate down to 10, 8, 4 and 2 Gbps. This is far better than typical N-2 support, often referred to as the speeds supported, such as 4/2/1 and 8/4/2. An upcoming FOS release will allow people with previous generation SAN384B-1/SAN768B-1 directors to move their 8Gbps blades over to the new SAN384B-2/SAN768B-2 generation models.
Since most CWDM and DWDM only support maximum 10 Gbps FC and 10GbE, Brocade's 16Gbps can automatically drop down to 10 Gbps for direct attachment to CWDM/DWDM, rather than having a step-down box normally required.
A major advancement is the change from copper to optical "Inter-Chassis Links" (ICL). Unlike Inter-switch links (ISL) that use up SAN ports on each box, the ICL is faster, more efficient and does not consume ports. Normally, clients would connect two directors together, but now you can connect up to six chassis together! For example, you can have four SAN368B-2 connected to your host servers, ICL attached to two SAN768B-2, that are then connected to your disk and tape storage devices. The fiber optic ICL allow for up to 50 meters distance. Combining six chassis together would allow the complex to support over 3,000 ports (8 Gbps) or 2,300 ports (16 Gbps).
The SAN384B-2 and SAN768B-2 supports "virtual SAN" logical switches, traffic isoliation (TI) zones, fabric-assigned WWNNs, and fabric-based QoS.
Lastly, Brocade offers a free utility called [SANhealth] that will gather data from your b-type, m-type and even Cisco MDS-based SAN. The data can then be sent to Brocade for analysis, and Brocade will then email back some nice Visio graphs, spreadsheets and other analysis results on the health of your SAN.
BladeCenterservers come in many flavors, including blades with Intel, AMD and POWER chipsets, and can be configured in Grid and SuperComputer configurations. Up to 14 blade servers can fit intoa single 7U-high chassis, making this twice as dense as standard 1U-high rack-mounted servers.
System x, the new "IBM Systems" name for our popular xSeries product line, support Intel and AMD chipsets. These come in both rack-mountedand tower configurations. These also are idea for clustered and SuperComputer configurations.[Read More]
In last week's System Storage Portfolio Top Gun class in Dallas, some of the students were not familiarwith Really Simple Syndication (RSS). For the uninitiated, this can be intimidating.I thought a quick overview of what I've done might help:
Chose a "feed reader". I chose Bloglines but there are many others.
Use Technorati to search other blogs for keywords or phrases I am looking for.
When I find a blog that I like to continue tracking, I "add" it to my subscription list on bloglines. Just hit "add" and copy the URL of the blog you want to track. Bloglines will figure out the RSS keywords required.I track eight blogs at the momemnt, but some people with lots of time on their hands track 20 or more. It is easy to unsubscribe, so don't be afraid to try some out for a few days.
Since I was actually going to run a blog of my own, I read a few books on the topic. One I recommend is "Naked Conversations" by Robert Scoble and Shel Israel, both experienced bloggers.
Finally, I am not big on spell checking, but most places have the option to preview your post or comment before it actually gets posted, which is not a bad idea if you use any HTML tags.
For a quick taste of blogging, consider using Data Storage Blogger Feed Reader. This has a lot of blogs on the topic of storage, already added and categorized for your convenience, ready for your perusal.
I am sure there are many other ways to enjoy the Blogosphere, but this works for me.[Read More]
Yesterday, I asked if you were prepared for the future? The future is now. Today, IBM announced its["New Enterprise Data Center"] vision and strategy which spans software, hardware and services in dealing withthe latest challenges that our clients are faced with today, or will face sooner or later this century.
Here's an excerpt:
Align IT with business goals These changes demand that IT improve cost and service delivery, manage escalating complexity, and better secure the enterprise. And aligning IT more closely with the business becomes a primary goal. The new enterprise data center is an evolutionary new model for efficient IT delivery that helps provide the freedom to drive business innovation. Through a service oriented model, IT will be able to better manage costs, improve operational performance and resiliency, and more quickly respond to business needs. This approach will deliver dynamic and seamless access to IT services and resources, improving both productivity and satisfaction.
IBM's Vision for the New Enterprise Data Center The new enterprise data center can improve the integration of people, process, and technology in your business to help you improve efficiency and effectiveness. As you implement a new enterprise data center strategy, your infrastructure becomes open, efficient, and easy to manage. And your IT staff can move from a focus on fixing IT problems to solving business challenges. Ultimately your processes become standardized and efficient, focused on business needs rather than technology.
A lot was announced today, so I will give a quick recap now, and cover specific areas over the rest of the week.
IBM System z10 Enteprise Class
IBM introduces its most powerful mainframe. Before you think "Wait, that's a mainframe, that doesn't apply to me"stop to consider all that IBM has done to make the mainframe an "open system" without sacrificing security oravailability:
Open standard connectivity, including TCP/IP and now 6Gbps Infiniband and 10GbE Ethernet.
Unix System Services. Yes, z/OS is certified to provide UNIX interfaces for today's applications.
HFS and zFS file systems that can be mounted, shared, and used by traditional z/OS applications and JCL.
Linux and Java. Many of today's largest websites are run on mainframes behind the scenes.
Extreme bandwidth. The z10 EC handles up to 336 FICON channels (4Gbps) for large data processing workloads
The z10 EC is as powerful as 1,500 x86 (such as Intel or AMD) servers, but consumes 85 percent less floorspace and85 percent less energy. (They should put a "green" stripe down the front of this box just to remind everyone how energy efficient this server really is!) For more on the z10 EC, see the[Press Release].
Enhanced IBM System Storage DS8000
With the XIV acquisition taking the role as the best place to put unstructured files for Web 2.0 applications,the IBM DS8000 can focus on its core strength, managing databases and online transactions for the mainframe.There's enough here to justify its own post, so I will cover this later.
IT Service Management Center for z (ITSMCz)
Trust me, I don't make up these acronyms. IT Service Management are the policies and procedures for managingan IT environment, such as following the best practices documented in the IT Infrastructure Library (ITIL).In the past, IBM tools have focused on Linux, UNIX and Windows on distributed servers, but today ITSMCz bringsall of that to the mainframe! (or perhaps more correct to say "brings the mainframe to all that"!)
IT Transformation & Optimization - Infrastructure Strategy and Planning services
I don't make up the names of our service offerings either. However, one thing is clear, it is time for peopleto re-evaluate their current data center, and come up with a new plan. The average data center is 15 years old.According to Gartner Group, more than 70 percent of the world's "Global 1000" organizations will have to make significant modifications to their data centers in the next five years. IBM can help, and is rolling outa new set of services specifically to help clients make this transition, to better align their IT to their business strategies.
Economic Stimulus Package
IBM borrowed this idea from the U.S. government. IBM Global Financing is offering special terms and ratesfor new equipment installed by December 31 this year.
Want to learn more? Read this 15-page[IBM's Vision]white paper.
For those of us in the northern hemisphere, yesterday was this year's Winter Solstice, representingthe shortest amount of daylight between sunrise and sunset. So today, I thought I would blog on my thoughtsof managing scarcity.
Earlier in my career, I had the pleasure to serve as "administrative assistant" to Nora Denzel for the week at a storage conference. My job was to make her look good at the conference, which if you know Nora, doesn't take much. Later, she left IBM to work at HP, and I gotto hear her speak at a conference, and the one thing that I remember most was her statement that thewhole point of "management" was to manage scarcity, as in not enough money in the budget,not enough people to implement change, or not enough resources to accomplish a task.(Nora, I have no idea where you are today, so if you are reading this, send me a note).
Of course, the flip-side to this is that resources that are in abundance are generallytaken for granted. Priorities are focused on what is most scarce. Let's examine some of theresources involved in an IT storage environment:
Capacity - while everyone complains that they are "running out of space", the truth is that most external disk attached to Linux, UNIX, or Windows systems contain only 20-40% data. Many years ago, I visitedan insurance company to talk about a new product called IBM Tivoli Storage Manager. This company had 7TB of disk on their mainframe,and another 7TB of disk scattered on various UNIX and Windows machines. In the room were TWO storage admins for
the mainframe, and 45 storage admins for the distributed systems. My first question was "why so many people forthe mainframe, certainly one of you could manage all of it yourself, perhaps on Wednesday afternoons?" Their response was that they acted as eachother's backup, in case one goes on vacation for two weeks. My follow-up question to the rest of the audience was:"When was the last time you took two weeks vacation?" Mainframes fill their disk and tape storage comfortablyat over 80-90% full of data, primarily because they have a more mature, robust set of management software, likeDFSMS.
Labor - by this I mean skilled labor able to manage storage for a corporation. Some companies I have visitedkeep their new-hires off production systems for the first two years, working only on test or development systemsonly until then. Of course, labor is more expensive in some countries than others. Last year, I was doing a whiteboard session on-site for a client in China, and the last dry-erase pen ran out of ink. I asked for another pen, and they instead sent someone to go re-fill it. I asked wouldn't it be cheaper just to buy another pen, and they said "No, labor is cheap, but ink is expensive." Despite this, China does complain that there is a shortage of askilled IT labor force, so if you are looking for a job, start learning Mandarin.
Power and Cooling - Most data centers are located on raised floors, with large trunks of electrical power and hugeair conditioning systems to deal with all the heat generated from each machine. I have visited the data centers ofclients that are forced now to make decisions on storage based on power and cooling consumption, because the coststo upgrade their aging buildings are too high. Leading the charge is IBM, with technology advancements in chips, cards, and complete systems that use less power, and generate less heat. While energy is still fairly cheap in the grand scheme of things, fears ofGlobal Warmingand declining oil supplies, the costs ofpower and cooling have gotten some news lately. In 1956, Hubbert predicted US would reach peak oil supplies by1965-1970 (it happened in 1971), and this year Simmonsestimated that world-wide oil production began its decline already in 2005. Smart companies like Google have movedtheir server farms to places like Oregon in the Pacific Northwest for cheaper hydroelectric power.
Bandwidth - Last year IBM introduced 4Gbps Fibre Channel and FICON SAN networking gear, along with the servers and storage needed to complete the solution. 4Gbps equates to about 400 MB/sec in data throughput. By comparison, iSCSI is typically run on 1Gbps Ethernet, but has so much overheads that you only get abour 80 MB/sec. Next year, we may see both 8 Gbps SAN, and 10 GbE iSCSI, to provide 800 MB/sec throughputs. My experience is that the SAN is not the bottleneck, instead people run out of bandwidth at the server or storage end first. They may not have a million dollars to buy the fastest IBM System p5 servers, or may not have enough host adapters at the storage system end.
Floorspace - I end with floorspace because it reminds me that many "shortages" are temporary or artificially created. Floorspace is only in short supply because you don't want to knock down a wall, or build a new building, to handle your additional storage requirements.In 1997, Tihamer Toth-Fejel wrote an article for the National Space Society newsletter that estimated that ...Everybody on Earth could live comfortably in the USA on only 15% of our land area, with a population density between that of Chicago and San Francisco. Using agricultural yields attained widely now, the rest of the U.S. would be sufficient to grow enough food for everyone. The rest of the planet, 93.7% of it, would be completely empty.Of course, back in 1997 the world population was only 5.9 billion, and this year it is over 6.5 billion.
This last point brings me back to the concept of food, and I am not talking about doughnuts in the conference room, or pizza while making year-end storage upgrades. I'm talking aboutthe food you work so hard to provide for yourself and your family. The folks at Oxfam came up with a simpleanalogy. If 20 people sit down at your table, representing the world’s population:
3 would be served a gourmet, multi-course meal, while sitting at decorated table and a cushioned chair.
5 would eat rice and beans with a fork and sit on a simple cushion
12 would wait in line to receive a small portion of rice that they would eat with their hands while sitting on the floor.
So for those of you planning a special meal next Monday, be thankful you are one of the lucky three, and hopefulthat IBM will continue to lead the IT industry to help out the other seventeen.
It's official! My "blook" Inside System Storage - Volume I is now available.
This blog-based book, or “blook”, comprises the first twelve months of posts from this Inside System Storage blog,165 posts in all, from September 1, 2006 to August 31, 2007. Foreword by Jennifer Jones. 404 pages.
IT storage and storage networking concepts
IBM strategy, hardware, software and services
Disk systems, Tape systems, and storage networking
Storage and infrastructure management software
Second Life, Facebook, and other Web 2.0 platforms
IBM’s many alliances, partners and competitors
How IT storage impacts society and industry
You can choose between hardcover (with dust jacket) or paperback versions:
This is not the first time I've been published. I have authored articles for storage industry magazines, written large sections of IBM publications and manuals, submitted presentations and whitepapers to conference proceedings, and even had a short story published with illustrations by the famous cartoon writer[Ted Rall].
But I can say this is my first blook, and as far as I can tell, the first blook from IBM's many bloggers on DeveloperWorks, and the first blook about the IT storage industry.I got the idea when I saw [Lulu Publishing] run a "blook" contest. The Lulu Blooker Prize is the world's first literary prize devoted to "blooks"--books based on blogs or other websites, including webcomics. The [Lulu Blooker Blog] lists past year winners. Lulu is one of the new innovative "print-on-demand" publishers. Rather than printing hundredsor thousands of books in advance, as other publishers require, Lulu doesn't print them until you order them.
I considered cute titles like A Year of Living Dangerously, orAn Engineer in Marketing La-La land, or Around the World in 165 Posts, but settled on a title that matched closely the name of the blog.
In addition to my blog posts, I provide additional insights and behind-the-scenes commentary. If you go to the Luluwebsite above, you can preview an entire chapter in its entirety before purchase. I have added a hefty 56-page Glossary of Acronyms and Terms (GOAT) with over 900 storage-related terms defined, which also doubles as an index back to the post (or posts) that use or further explain each term.
So who might be interested in this blook?
Business Partners and Sales Reps looking to give a nice gift to their best clients and colleagues
Managers looking to reward early-tenure employees and retain the best talent
IT specialists and technicians wanting a marketing perspective of the storage industry
Mentors interested in providing motivation and encouragement to their proteges
Educators looking to provide books for their classroom or library collection
Authors looking to write a blook themselves, to see how to format and structure a finished product
Marketing personnel that want to better understand Web 2.0, Second Life and social networking
Analysts and journalists looking to understand how storage impacts the IT industry, and society overall
College graduates and others interested in a career as a storage administrator
And yes, according to Lulu, if you order soon, you can have it by December 25.